GoTo Europe Focused Delivery Program - Bosch Global · Bosch Rexroth AG, RE 01500, 2016-04 4 GoTo...

GoTo EuropeFocused Delivery ProgramProduct overview Industrial and Mobile Hydraulics

You have hardly any time to complete your order before your delivery arrives

Nowadays, every day counts in the global competition. A quick reaction time for machinery and system manufacturers has become a critical success factor. In this respect, a reliable, accurate delivery of machine components plays a significant role – especially for single piece and special production. With the GoTo preferred program by Rexroth, you benefit from the simple order process and the timely delivery of our most popular products from different technologies.

Bosch Rexroth AG, RE 01500, 2016-04

2 GoTo Europe

The advantages for you ▶ Reduced stock-keeping and capital commitment due

to short, reliable delivery periods ▶ Flexible reaction to customer and market requirements

thanks to the high availability of many products ▶ Simple, fast ordering via email, fax, mail or

eCommerce at Bosch Rexroth or their distribution partners

You will receive the most common Rexroth products from industry and mobile hydraulics, electrical drive, control and screw technology as well as linear and assembly technology in a reliable manner and on the desired date. This applies to the whole of Europe, taking into consideration product-dependent maximum order quantities, and is as easy as can be. Construct your machines and systems in a timely optimized and simultaneously efficient manner – we will support you with this!

RE 01500, 2016-04, Bosch Rexroth AG

3 GoTo Europe

GoTo product overviews

▶ Industrial and mobile hydraulics

▶ Electrical drive, control and screw technology

▶ Linear motion technology

▶ Assembly technology

GoTo product overviews according to technologies

The GoTo preferred program offers a targeted selection from our most common products with preferred service: This ensures that you will receive your products quickly and reliably so that you are able to react to your market and customer requirements at all times.

You will benefit from simplified access to product information, preferred order handling and shorter delivery periods. This will allow you to finish your machines or systems in due time.

Both the printed and the online version of our GoTo product overviews show you the complete portfolio. Additionally, our websites also provide you with further information on the respective product, the technical data and the order.

GoTo Europe preferred program




Product overview industrial and mobile hydraulics Product overview electric drive, control and screw technology Product overview linear technology Product overview assembly technology


4 GoTo Europe

1 Select product

1 Select product Use the GoTo product overviews to select your desired products.

2. View product dataNow visit the website of the preferred program – www.boschrexroth.com/goto. It offers simple access to further product information, including data sheets, part numbers, specifications, downloads and more. 3. Order productFor ordering the product, just contact Rexroth or your distribution partner; you can also order them online via our eShop: www.boschrexroth.com/eshop

2 View product data

▶ Product-specific information

▶ Maximum order quantities

3. Order product

▶ Availability ▶ Delivery times ▶ Prices

To your product in three steps


5 Contents | GoTo Europe

Contents Pumps 09Axial piston pumps 10External gear pumps 24Internal gear pumps 28Vane pumps 31Radial piston pumps 33Gerotor pumps 35

Motors 37Axial piston motors 38External gear motors 40

Mobile control units 43Pilot control units 44Power brake valves 49

Cylinders 53Mill type cylinders 54

On/off valves 57Isolator valves 58Directional valves 69Pressure valves 81Flow control valves 942-way cartridge valves 102


6 GoTo Europe | Contents

Contents Proportional servo valves 105Proportional directional valves 106Proportional pressure valves 110Directional control valves 118

Control blocks and plates 121Subplates 122Cover plates 125Manifolds 126

Electronics 129Valve amplifiers 130Motion 140Sensor technology and signal transmitters 141Electronics accessories 145Mobile electronics 146

Systems 151Electro-hydraulic control systems 152

Power units 155Motor-pump groups 156


7

Contents

Contents | GoTo Europe

Accumulators 159Hydro-pneumatic accumulators 160Accumulator stations 162

Filters 163Breathing filters 164Tank mounted filters / return flow filters 165Filter systems 166 Filter elements 168Filter accessories 174

Order details 175

8 GoTo Europe


Pumps

9


Pumps | GoTo Europe

Axial piston pumpsAxial piston pumps in swash plate and bent axis design are intended for the medium and high pressure range. Numerous variations in the designs, performance ranges, and adjustment options offer ideal solutions for mobile and stationary applications.

External gear pumpsExternal gear pumps are cost-effective displacement pumps. They are available in many different versions. A selected program of single and multiple pumps is available within 10 working days.

Internal gear pumpsInternal gear pumps can be used up to a continuous pressure of 315 bar (depending on the frame size). This pump principle features a compact design with particularly high energy density.

Vane pumpsVane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions.

Radial piston pumpsRadial piston pumps are characterized by very high operating pressures of up to 700 bar. The volume flows of the individual pistons can be used for various tasks.

Gerotor pumpsGerotor pumps are used in the low-pressure range up to 15 bar. They are often used in connection with other Rexroth pumps in cooling, filter or lubrication circuits.

10

For order details regarding the GoTo products, see page 176. Bosch Rexroth AG, RE 01500, 2016-04

GoTo Europe | Pumps | Axial piston pumps

Axial piston fixed displacement pumpA2FO series 6

Features ▶ Axial tapered piston bent axis design ▶ Working ports SAE flanges or thread ▶ High power density ▶ Small dimensions ▶ High overall efficiency ▶ Economic concept

Product descriptionA2FO is a displacement pump with axial tapered piston transmission in bent axis design for hydrostatic drives in the open circuit. The flow is proportional to the drive speed and the displacement.

More detailed information:Data sheet 91401

▶ Size 10 … 200 ▶ Nominal pressure 400 bar ▶ Peak pressure 450 bar ▶ Open circuit

Technical data Size NG 10 12 16 28 32 45 56 63

Displacement Vg cm3 10.3 12 16 28.1 32 45.6 56.1 63

Speed nnom min-1 3150 3150 3150 2500 2500 2240 2000 2000

Flow at nnom qV l/min 32 38 50 70 80 102 112 126

Torque Δp = 400 bar T Nm 66 76 102 179 204 290 357 401

Size NG 80 90 107 125 160 180 200

Displacement Vg cm3 80.4 90 106.7 125 160.4 180 200

Speed nnom min-1 1800 1800 1600 1600 1450 1450 1550

Flow at nnom qV l/min 145 162 171 200 233 261 310

Torque Δp = 400 bar T Nm 512 573 679 796 1021 1146 1273

http://www.boschrexroth.com/various/utilities/mediadirectory/index.jsp?publication=NET&ccat_id=20000&remindCcat=on&search_action=submit&search_query=91401

11

For order details regarding the GoTo products, see page 176. RE 01500, 2016-04, Bosch Rexroth AG

Axial piston pumps | Pumps | GoTo Europe

Axial piston fixed displacement pumpA17FO series 10

Features ▶ Axial tapered piston bent axis design ▶ Flange and shaft for direct attachment at the ancillary

output of commercial vehicles ▶ Easy adjustment to the direction of rotation of the drive ▶ High self-priming ability ▶ No leakage line required ▶ Noise-optimized

Product descriptionA17FO is a displacement pump with axial tapered piston transmission in bent axis design for hydrostatic drives in the open circuit. The pump has been especially designed for use in commercial vehicles, e.g. street tippers, dump trucks, HGV loading cranes, tankers, municipal vehicles. The flow is proportional to the drive speed and the displacement.


▶ Size 23 … 107 ▶ Nominal pressure 300 bar ▶ Peak pressure 350 bar ▶ Open circuit ▶ Application in commercial vehicles

Technical Data Size NG 23 32 45 63 80 107

Displacement Vg cm3 22.9 32 45.6 63 80.4 106.7

Speed nnom min-1 3050 2750 2650 2200 2150 2000

Flow at nnom qV l/min 70 88 121 139 173 213

Torque Δp = 300 bar T Nm 109 153 218 301 384 509


12



Axial piston fixed displacement pumpA17FNO series 10

Features ▶ Axial tapered piston bent axis design ▶ Flange and shaft for direct attachment at the ancillary

output of commercial vehicles ▶ Easy adjustment to the direction of rotation of the drive ▶ High self-priming ability ▶ No leakage line required ▶ Noise-optimized

Product descriptionA17FNO is a displacement pump with axial tapered piston transmission in bent axis design for hydrostatic drives in the open circuit. The pump has been especially designed for use in commercial vehicles, e.g. street tippers, dump trucks, HGV loading cranes, tankers, municipal vehicles. The flow is proportional to the drive speed and the displacement.


▶ Size 125 ▶ Nominal pressure 250 bar ▶ Peak pressure 300 bar ▶ Open circuit ▶ Application in commercial vehicles

Technical data Size NG 125

Displacement Vg cm3 125

Speed nnom min-1 1750

Flow at nnom qV l/min 219

Torque Δp = 250 bar T Nm 497


13




Axial piston fixed displacement pumpA10FZO, A10FZG

Features ▶ For the use in one- and two-quadrant operations

(A10FZO) ▶ For the use in four-quadrant operations (A10FZG) ▶ Suitable for start/stop operations ▶ Suitable for long pressure-holding operations ▶ Reliable A10 engine technology ▶ Optional drive-through mechanism

Product descriptionThe reliable axial piston units of the A10 product family have been further developed for the use in speed-controlled drives. They have been approved for start/stop operations and designed for a changing direction of rotation. The A10 units can be used as pumps and motors in one-, two- or four-quadrant operations.

▶ For the variable-speed operation with synchronous and asynchronous motors

▶ Sizes 10 … 45 ▶ Nominal pressure 315 bar ▶ Peak pressure 350 bar ▶ Open circuit (A10FZO), closed circuit (A10FZG)

Technical data Size A10FZO NG 10 18 28 45Displacement Vg cm3 10.6 18 28 45

Speed nnom min-1 3600 3300 3000 3000

Flow at nnom qv l/min 38 59 84 135

Torque Δp = 315 bar T Nm 53 90 140 226

Size A10FZG NG 10 18 28Displacement Vg cm3 10.6 18 28

Speed nnom min-1 3600 3300 3000

Flow at nnom qv l/min 38 59 84

Torque Δp = 315 bar T Nm 53 90 140


14



Axial piston variable displacement pumpA10VZO, A10VZG

Features ▶ For the use in one- and two-quadrant operations

(A10VZO) ▶ For the use in four-quadrant operations (A10VZG) ▶ Suitable for start/stop operations ▶ Suitable for long pressure-holding operations ▶ Reliable A10 engine technology ▶ Optional drive-through mechanism

Product descriptionThe reliable axial piston units of the A10 product family have been further developed for the use in speed-controlled drives. They have been approved for start/stop operations and designed for a changing direction of rotation. The A10 units can be used as pumps and motors in one-, two- or four-quadrant operations.


▶ For the variable-speed operation with synchronous and asynchronous motors

▶ Size 10 … 45 ▶ Nominal pressure 315 bar ▶ Peak pressure 350 bar ▶ Open circuit (A10VZO), closed circuit (A10VZG)

Technical data Size A10VZO NG 10 18 28 45Displacement Vg max cm3 10.5 18 28 45

Speed nnom min-1 3600 3300 3000 3000

Flow at nnom qv l/min 38 59 84 135

Torque Δp = 315 bar T Nm 421) 90 140 225

Size A10VZG NG 10 18 28Displacement Vg max cm3 10.5 18 28

Speed nnom min-1 3000 3300 3000

Flow at nnom qv l/min 31.5 59 84

Torque Δp = 315 bar T Nm 421) 90 1401) Δp = 250 bar


15




Axial piston variable displacement pumpA15VSO series 10

Features ▶ Axial piston swash plate design ▶ Controller-specifically, 100% mooring function is

possible (over center operation, motor operation) ▶ Compact design ▶ High efficiency ▶ High power density ▶ Low noise level ▶ Option: with charging pump

Product descriptionA15VSO is a variable displacement pump with axial piston transmission in swash plate design for hydrostatic drives in the open circuit. The flow is proportional to the drive speed and the displacement. By adjusting the swash plate, the flow can be steplessly changed.


Technical data Size NG 110 145 175 210 280

Displacement Vg max cm3 110 145 175 210 280

Speed nnom min-1 2400 2300 2150 2100 1800

Flow at nnom qv l/min 264 334 376 441 504

Torque Δp = 350 bar T Nm 613 808 975 1170 1560


16




Features ▶ Axial piston swash plate design ▶ Good suction behavior ▶ Low noise level ▶ Long life cycle ▶ Versatile controller program ▶ Short control time



Technical data Size NG 18 28 45 71 100 140

Displacement Vg max cm3 18 28 45 71 100 140

Speed nnom min-1 3300 3000 2600 2200 2000 1800

Flow at nnom qV l/min 59 84 117 156 200 252

Torque Δp = 280 bar T Nm 80 125 200 316 445 623



17




Features ▶ Axial piston swash plate design ▶ Hydrostatically unloaded cradle bearings ▶ Low noise level ▶ Low pressure pulsation ▶ High efficiency ▶ High resistance to cavitation, suction pressure drops

and housing pressure peaks



Technical data Size NG 45 71 100 140

Displacement Vg max cm3 45 71 100 140

Speed nnom min-1 1800 1800 1800 1800

Flow at nnom qV l/min 81 128 180 252

Torque Δp = 280 bar T Nm 200 317 446 624



18



Axial piston variable displacement pumpA10VO series 52

Features ▶ Axial piston swash plate design ▶ Through-drive mechanism for the attachment of

additional pumps up to the same size ▶ Approved for high speeds ▶ Low operating noise ▶ Short control times

Product descriptionA10VO is a variable displacement pump with axial piston transmission in swash plate design for hydrostatic drives in the open circuit. The flow is proportional to the drive speed and the displacement. By adjusting the swash plate, the flow can be steplessly changed.


Technical data Size NG 28 45

Displacement Vg max cm3 28 45

Speed nnom min-1 3000 2600

Flow at nnom qv l/min 84 117

Torque Δp = 250 bar T Nm 111 179

▶ Sizes 28 … 45 ▶ Nominal pressure 250 bar ▶ Peak pressure 315 bar ▶ Open circuit


19




Features ▶ Significant fuel savings of up to 15% compared to

constant systems ▶ Optimized efficiency leading to the same power at a

smaller consumption ▶ Increased life cycle compared to gear pumps ▶ Compact design thanks to integrated controller ▶ Well adjustable adjustment devices program for all

important applications ▶ By adjusting the swash plate, a stepless change in flow

is possible



Technical data Size NG 35

Displacement Vg max cm3 35

Speed nnom min-1 3000

Flow at nnom qV l/min 105

Torque Δp = 250 bar T Nm 139

▶ For load sensing systems in smaller machines ▶ Size 35 ▶ Nominal pressure 250 bar ▶ Peak pressure 280 bar ▶ Open circuit


20 GoTo Europe | Pumps | Axial piston pumps



Features ▶ Predominantly designed for use in mobile applications. ▶ Axial piston swash plate design ▶ At the through-drive, more pumps up to the same size

can be attached ▶ Numerous adjustments ▶ Option: with charging pump



Technical data Size NG 40 60 75 95

Displacement Vg max cm3 42 58.5 74 93.5

Speed nnom min-1 3000 2700 2550 2350

Flow at nnom qV l/min 126 158 189 220

Torque Δp = 350 bar T Nm 234 326 412 521



21 Axial piston pumps | Pumps | GoTo Europe



Features ▶ Axial tapered piston bent axis design ▶ Use in mobile and stationary application ranges ▶ Adjustment of the bent axis allows for stepless change

in flow ▶ Wide range of control and adjustment devices ▶ Short, robust pump with long life cycle

Product descriptionA7VO is a variable displacement pump with axial tapered piston transmission in bent axis design for hydrostatic drives in the open circuit. The flow is proportional to the drive speed and the displacement. By adjusting the bent axis, the flow can be steplessly changed.


Technical data Size NG 28 55 80 107 160

Displacement Vg max cm3 28.1 54.8 80 107 160

Speed nnom min-1 3150 2500 2240 2150 1900

Flow at nnom qV l/min 89 137 179 230 304

Torque Δp = 350 bar T Nm 156 305 446 596 891



22




Features ▶ Axial tapered piston bent axis design ▶ Improved system efficiency due to higher pressure ▶ High power density due to high pressure level for high

load-bearing capacity ▶ Flange and shaft for direct attachment at the ancillary

output of commercial vehicles ▶ High self-priming ability ▶ Option: Longer life cycle due to the use of long-life

bearings (A18VLO)

Product descriptionA18VO is a variable displacement pump with axial tapered piston transmission in bent axis design for hydrostatic drives in the open circuit. The pump has been especially designed for demanding applications and comfortable controls in working equipment in commercial vehicles, e.g. large HGV loading cranes and superstructures. The flow is proportional to the drive speed and the displacement. By adjusting the bent axis, the flow can be steplessly changed.


▶ Sizes 55 … 107 ▶ Nominal pressure 350 bar ▶ Peak pressure 400 bar ▶ Open circuit ▶ Application in commercial vehicles

Technical data Size NG 55 80 107

Displacement Vg max cm3 54.8 80 107

Speed nnom min-1 2500 2240 2150


Torque Δp = 350 bar T Nm 305 446 596


Product descriptionA4VG is a variable displacement pump with axial piston transmission in swash plate design for hydrostatic drives in the closed circuit. The flow is proportional to the drive speed and the displacement. By adjusting the swash plate, the flow can be steplessly changed.

23



Axial piston variable displacement pumpA4VG series 40

Features ▶ Axial piston swash plate design ▶ High power density due to extremely high pressure level ▶ Integrated boost pump for the feed and pilot oil supply ▶ Change in the direction of flow in the event of an

adjustment of the swash plate by means of zero position ▶ Integrated feeding and high pressure relief valves ▶ By default with adjustable pressure cut-off


Technical data Size NG 65 85 110

Displacement Vg max cm3 65.2 85.4 110.4

Speed nnom min-1 3800 3300 3150


Torque Δp = 430 bar T Nm 446 584 756

▶ Size 65 … 110 ▶ Nominal pressure 450 bar ▶ Peak pressure 500 bar ▶ Closed circuit


24


GoTo Europe | Pumps | External gear pumps

High performance external gear pumpAZPB

Features ▶ Continuously high quality due to large series production ▶ Long life cycle ▶ Plain bearings for high load ▶ Drive shafts corresponding to ISO or SAE and

customer-specific solutions ▶ Line connections: Connection flanges or

screw-in threads ▶ Combinations of several pumps possible

Product descriptionExternal gear pumps basically consist of one gear wheel pair and the housing with one front and one rear cover. The drive shaft drives one of the two gear wheels which again drives the second gear wheel in the opposite direction. Due to the rotation, hydraulic fluid is entrapped in the gear chambers and delivered along the housing from the suction port to the pressure port. The flow per rotation roughly corresponds to the total of the gear chamber volumes of the two gears.


Technical DataSize – series 3X NG 1.0 2.0 2.5 3.0 4.0 4.5 5.0 6.3 7.1

Displacement Vg cm3 1 2 2.5 3.15 4 4.5 5 6.3 7.1

Maximum continuous pressure p1 bar 220 220 220 220 220 220 220 220 200

Maximum intermittent pressure p2 bar 250 250 250 250 250 250 250 250 230

Speed at p2 nmin min-1 750 750 750 750 750 750 750 750 750

nmax min-1 6000 5000 5000 4000 4000 4000 4000 3500 3500

▶ Platform B ▶ Fixed displacement ▶ Size 1.0 … 7.1 ▶ Permanent pressure up to 220 bar ▶ Intermittent pressure up to 250 bar


25


External gear pumps | Pumps | GoTo Europe

High performance external gear pumpAZPF

Features ▶ Continuously high quality due to large series production ▶ Long life cycle ▶ Plain bearings for high loads ▶ Drive shafts according to ISO or SAE and





Technical DataSize – series 1X NG 4 5 8 11 14 16 19 22 221)

Displacement Vg cm3 4 5.5 8 11 14 16 19 22.5 22.5

Maximum continuous pressure p1 bar 250 250 250 250 250 250 210 180 210

Maximum intermittent pressure p2 bar 280 280 280 280 280 280 230 210 230

Speed at p2 nmin min-1 700 700 700 600 500 500 500 500 500

nmax min-1 4000 4000 4000 3500 3000 3000 3000 2500 3000

Size – series 2X NG 4 5 8 11 14 16 19 22 25 28

Displacement Vg cm3 4 5.5 8 11 14 16 19 22.5 25 28

Maximum continuous pressure p1 bar 250 250 250 250 250 250 250 220 195 170

Maximum intermittent pressure p2 bar 280 280 280 280 280 280 280 250 225 200

Speed at p2 nmin min-1 700 700 700 600 500 500 500 500 500 500

nmax min-1 4000 4000 4000 3500 3000 3000 3500 3500 3000 30001) Version with extended bearings

▶ Platform F ▶ Fixed displacement ▶ Size 4 … 28 ▶ Continuous pressure up to 250 bar ▶ Intermittent pressure up to 280 bar


26


GoTo Europe | Pumps | External gear pumps


High performance external gear pumpAZPN





Technical DataSize – series 1X NG 20 22 25 28 32 36

Displacement Vg cm3 20 22.5 25 28 32 36

Maximum continuous pressure p1 bar 230 230 230 210 180 160

Maximum intermittent pressure p2 bar 250 250 250 230 200 180

Speed at p2 nmin min-1 500 500 500 500 500 500

nmax min-1 3000 3000 3000 2800 2800 2800

Size – series 2X NG 20 22 25 28 32 36





nmax min-1 3000 3000 3000 2800 2800 2800

▶ Platform N ▶ Fixed displacement ▶ Size 20 … 36 ▶ Continuous pressure up to 250 bar ▶ Intermittent pressure up to 280 bar


27


External gear pumps | Pumps | GoTo Europe


High performance external gear pumpAZPG





Technical DataSize NG 22 25 28 32 36 40 45

Displacement Vg cm3 22.5 25 28 32 36 40 45

Maximum continuous pressure p1 bar 250 250 250 250 250 250 250

Maximum intermittent pressure p2 bar 280 280 280 280 280 280 280

Speed at p2 nmin min-1 600 600 500 500 500 500 500

nmax min-1 3000 3000 3000 2800 2800 2800 2600

Size NG 50 56 63 70 80 100

Displacement Vg cm3 50 56 63 70 80 100




nmax min-1 2600 2300 2300 2200 2000 1700

▶ Platform G ▶ Fixed displacement ▶ Size 22 … 100 ▶ Continuous pressure up to 250 bar ▶ Intermittent pressure up to 280 bar


28


GoTo Europe | Pumps | Internal gear pumps

Internal gear pumpPGF

Features ▶ Fixed displacement ▶ Low operating noise ▶ Low flow pulsation ▶ Suitable for broad viscosity and speed ranges ▶ Very good suction characteristic ▶ Long life cycle due to plain bearings and sealing gap

compensation

Product descriptionHydraulic pumps of the PGF type are gap-compensated internal gear pumps with constant displacement. The hydrodynamically mounted pinion shaft drives the toothed internal gear. The tooth clearances opening in the suction area suck in the hydraulic fluid and transport it away from the pinion shaft and internal gear. Suction and pressure area are separated by the radial compensation elements and the tooth engagement between internal gear and pinion shaft.


▶ Frame size 1: Size 1.7 … 5 (component series 2X) ▶ Frame size 2: Size 6.3 ... 22 (component series 2X) ▶ Frame size 3: Size 20 ... 40 (component series 3X) ▶ Peak pressure 250 bar ▶ Maximum displacement volume 40.5 cm3

Technical data Size NG 1.7 2.2 2.8 3.2 4.1 5.0 6.3 8 11

Displacement Vg cm3 1.7 2.2 2.8 3.2 4.1 5.0 6.5 8.2 11

Speed nmin min-1 600 600 600 600 600 600 600 600 600

nmax min-1 3600 3600 3600 3600 3600 3600 3600 3600 3600

Flow qV l/min 2.4 3.2 4.1 4.6 6.0 7.2 9.4 11.9 16

Nominal pressure, permanent pN bar 180 210 210 210 210 180 210 210 210

Size NG 13 16 19 22 20 25 32 40

Displacement Vg cm3 13.3 16 18.9 22 20.6 25.4 32.5 40.5

Speed nmin min-1 600 600 600 600 500 500 500 500

nmax min-1 3600 3600 3600 3000 3600 3200 3000 2500

Flow qV l/min 19.3 23.3 27.4 31.9 29.9 36.8 47.1 58.7

Nominal pressure, permanent pN bar 210 210 210 180 210 210 210 180


29


Internal gear pumps | Pumps | GoTo Europe

Internal gear pumpPGH-2X

Features ▶ Fixed displacement ▶ Low operating noise ▶ Low flow pulsation ▶ High efficiency also at low speed and viscosity due to

sealing gap compensation ▶ Suitable for broad viscosity and speed ranges

Product descriptionHydraulic pumps of the PGH type are gap-compensated internal gear pumps with constant displacement. The hydrodynamically mounted pinion shaft drives the toothed internal gear. The tooth clearances opening in the suction area suck in the hydraulic fluid and transport it away from the pinion shaft and internal gear. Suction and pressure area are separated by the radial compensation elements and the tooth engagement between internal gear and pinion shaft.


▶ Frame size 2: Size 5 ... 8 ▶ Frame size 3: Size 11 … 16 ▶ Peak pressure 350 bar ▶ Maximum displacement 16 cm3

▶ Component series 2X


Displacement Vg cm3 5.24 6.5 8.2 11.0 13.3 16.0

Speed nmin min-1 600 600 600 600 600 600

nmax min-1 3000 3000 3000 3000 3000 3000

Flow qV l/min 7.5 9.3 11.8 15.8 19.1 23.0

Nominal pressure, permanent pN bar 315 315 315 315 315 315


30


GoTo Europe | Pumps | Internal gear pumps

Internal gear pumpPGH-3X

Features ▶ Fixed displacement ▶ Low operating noise ▶ Low flow pulsation ▶ High efficiency also at low speed and viscosity due to

sealing gap compensation ▶ Suitable for broad viscosity and speed ranges ▶ Suitable for operation with HFC fluid

Product descriptionHydraulic pumps of the PGH type are gap-compensated internal gear pumps with constant displacement. The hydrodynamically mounted pinion shaft drives the toothed internal gear. The tooth clearances opening in the suction area suck in the hydraulic fluid and transport it away from the pinion shaft and internal gear. Suction and pressure area are separated by the radial compensation elements and the tooth engagement between internal gear and pinion shaft.




Speed nmin min-1 200 200 200 200 200 200

nmax min-1 3000 3000 3000 3000 3000 3000

Flow qV l/min 28.9 36.3 46.9 57.6 72.8 92.8


Size NG 80 100 125 160 200 250


Speed nmin min-1 200 200 200 200 200 200

nmax min-1 3000 3000 3000 3000 3000 3000

Flow qV l/min 116.9 143.8 179.8 233.7 287.7 359.6


▶ Frame size 4: Size 20 … 50 ▶ Frame size 5: Size 63 … 250 ▶ Peak pressure 350 bar ▶ Maximum displacement 250 cm3



31


Vane pumps | Pumps | GoTo Europe

Adjustable vane pump, pilot-operatedPV7

Features ▶ Low operating noise ▶ Extended bearing life cycle thanks to hydrodynamically

lubricated plain bearings ▶ Pressure and flow can be controlled ▶ Low hysteresis ▶ Very low control up times and down control times ▶ Suitable for HETG and HEES media

Product descriptionHydraulic pumps of type PV7 are vane pumps with adjustable displacement with medium operating pressure for application in machine tool and packaging machine construction. The PV7 distinguishes itself by its long life cycle and excellent control quality as required in industrial applications.


Technical data Frame size-size BG-NG 10-14 10-20 16-20 16-30 25-30 25-45


Speed nmin min-1 900 900 900 900 900 900

nmax min-1 1800 1800 1800 1800 1800 1800

Flow qV l/min 21 29 29 43.5 43.5 66


Frame size-size BG-NG 40-45 40-71 63-71 63-94 100-118 100-150


Speed nmin min-1 900 900 900 900 900 900

nmax min-1 1800 1800 1800 1800 1800 1800

Flow qV l/min 66 104 108 136 171 218


▶ Size 14 … 150 ▶ Frame sizes 10, 16, 25, 40, 63 and 100 ▶ Nominal pressure up to 160 bar ▶ Maximum flow 270 l/min ▶ Component series 1X


32


GoTo Europe | Pumps | Vane pumps

Adjustable vane pump, direct operatedPV7…A

Features ▶ Low operating noise ▶ High efficiency ▶ Long bearing life cycle ▶ Very low control up times and down control times ▶ Fixation and mounting dimensions according to

VDMA 24560 part 1 and ISO 3019-2

Product descriptionHydraulic pumps of type PV7...A are vane pumps with adjustable displacement with medium operating pressure for application in machine tool and packaging machine construction. The PV7...A distinguishes itself by its long life cycle and excellent control quality as required in industrial applications.


Technical data Frame size-size BG-NG 6-10 6-14 20-20 20-25

Displacement Vg max cm3 10 14 20 25

Speed nmin min-1 900 900 900 900

nmax min-1 1800 1800 1800 1800

Flow qv l/min 14.5 20 29 36

Peak pressure pmax bar 100 70 100 100

▶ Sizes 10 … 25 ▶ Frame sizes 6 and 20 ▶ Peak pressure up to 100 bar ▶ Maximum flow 36 l/min ▶ Component series 1X and 2X


33


Radial piston pumps | Pumps | GoTo Europe

Radial piston pumpPR4-Mini

Features ▶ Fixed displacement ▶ Self-priming ▶ Long life cycle thanks to hydrodynamically lubricated

plain bearings ▶ Very compact design ▶ Combination possibility with internal gear pumps and

vane pumps

Product descriptionHydraulic pumps of type PR4 are valve-controlled, self-priming radial piston pumps with constant displacement. The pistons are arranged radially to the eccentric shaft. In downward movements of the piston, the working space in the cylinder is enlarged. The resulting underpressure opens the suction valve. This establishes the connection from the suction chamber to the working space. In upward movements of the piston, the suction valve is closed and the pressure valve is opened. The hydraulic fluid now flows to the system via the pressure connection.


Technical Data Size NG 0.40 0.63 1.00 1.60 2.00

Displacement Vg cm3 0.40 0.63 1.00 1.60 2.00

Speed nmin min-1 1000 1000 1000 1000 1000

nmax min-1 3400 3000 2000 2000 2000

Flow qv l/min 1.36 1.89 2 3.2 4

Operating pressure, maximum pN bar 700 700 450 250 175

▶ Size 0.40 ... 2.00 ▶ Maximum operating pressure 700 bar ▶ Maximum displacement 2.00 cm3



34


GoTo Europe | Pumps | Radial piston pumps

Radial piston pumpPR4

Features ▶ Fixed displacement ▶ Self-priming ▶ Favorable grading of the 14 sizes for perfect device

design ▶ Long life cycle thanks to hydrodynamically lubricated

plain bearings ▶ Optionally in the standard delivery range: several

pressure ports with different cylinder combinations

Product descriptionHydraulic pumps of type PR4 are valve-controlled, self-priming radial piston pumps with constant displacement. The pistons are arranged radially to the eccentric shaft. In downward movements of the piston, the working space in the cylinder is enlarged. The resulting underpressure opens the suction valve. This establishes the connection from the suction chamber to the working space. In upward movements of the piston, the suction valve is closed and the pressure valve is opened. The hydraulic fluid now flows to the system via the pressure connection.


Technical data Size NG 1.60-700 2.00-700 2.50-700 3.15-500 4.00-700 5.00-500


Speed nmin min-1 1000 1000 1000 1000 1000 1000

nmax min-1 2000 2000 2000 2000 2000 2000

Flow qv l/min 3.02 4.28 5.18 6.78 8.64 9.64

Operating pressure, maximum pN bar 700 700 700 500 700 500

Size NG 6.30-500 8.00-500 10.00-500 16.00-500 20.00-500

Displacement Vg cm3 5.83 8.03 9.71 16.07 19.43

Speed nmin min-1 1000 1000 1000 1000 1000

nmax min-1 2000 2000 2000 2000 2000

Flow qv l/min 11.66 16.06 19.42 32.14 38.86

Operating pressure, maximum pN bar 500 500 500 500 500

▶ Size 1.60 ... 20.00 ▶ Maximum operating pressure 700 bar ▶ Maximum displacement 19.43 cm3



35


Gerotor pumps | Pumps | GoTo Europe

Gerotor pumpPGZ

Features ▶ Low-pressure pump with constant displacement ▶ Very low operating noise ▶ Suitable for broad viscosity and speed ranges ▶ Very good suction behavior ▶ Flexible combination possibility with Rexroth axial

piston, internal gear and vane pumps ▶ Application in cooling, filter or lubricant circuits with

low pressures

Product descriptionHydraulic pumps of type PGZ are gerotor pumps with constant displacement. The shaft drives the inner rotor. The inner rotor also rotates the outer rotor. The tooth clearances opening in the suction range suck in the hydraulic fluid. The separation of suction and pressure area is implemented on the opposite side of the meshing area by means of a radial gap created by the tooth profile of the outer and the inner rotor sliding against each other. Within the pressure area, the hydraulic fluid is displaced into the pressure port by means of the chambers becoming smaller.


Technical data Size PGZ4 NG 20 32 40 50 63 80

Displacement Vg cm3 21 33.4 42.1 52 64.4 84.2

Speed nmin min-1 200 200 200 200 200 200

nmax min-1 3000 3000 3000 3000 2300 1800

Flow (n = 1450 min-1) qv l/min 28 46 58 71 88 116


Size PGZ5 NG 100 140

Displacement Vg cm3 105.3 136.3

Speed nmin min-1 200 200

nmax min-1 1800 1500

Flow (n = 1450 min-1) qv l/min 144 186

Nominal pressure, permanent pN bar 15 15

▶ Frame size 4: Size 20 ... 80 ▶ Frame size 5: Size 63 ... 140 ▶ Nominal pressure 15 bar ▶ maximum displacement 140 cm³ ▶ Component series 1X


36


GoTo Europe

Motors

37


Motors | GoTo Europe

Axial piston motorsAxial piston motors are available in swash plate or bent axis design for medium and high pressure applications. Our hydrostatic drives for mobile and stationary application ranges stand out due to their robustness, reliability, long life cycles, low noise emissions and high efficiencies as well as high cost-effectiveness.

External gear motorsExternal gear motors are a cost-effective alternative for rotary drives up to approximately 50 kW. The motors are available for one direction of rotation or reversible, for 2- and 4-quadrant operation.

38


GoTo Europe | Motors | Axial piston motors

Axial piston constant motorA2FM series 6

Features ▶ Use in mobile and stationary application ranges ▶ Axial tapered piston bent axis design ▶ High power density ▶ Small dimensions ▶ High overall efficiency ▶ Good start-up efficiency

Product descriptionA2FM is a constant motor with axial tapered piston transmission in bent axis design for hydrostatic drives in the open and closed circuit. With axial piston units in bent axis design, the pistons are arranged diagonally to the drive shaft. The pistons are directly supported by the drive shaft and there create a pressure-dependent torque.


Technical data Size NG 5 10 12 16 23 28 32 45 56

Displacement Vg cm3 4.93 10.3 12 16 22.9 28.1 32 45.6 56.1

Speed nnom min-1 10000 8000 8000 8000 6300 6300 6300 5600 5000

Displacement at nnom qV l/min 49 82 96 128 144 177 202 255 281

Torque Δp = 315 bar T Nm 24.7 – – – – – – – –

Δp = 400 bar T Nm – 66 76 102 146 179 204 290 357

Size NG 63 80 90 107 125 160 180 200

Displacement Vg cm3 63 80.4 90 106.7 125 160.4 180 200

Speed nnom min-1 5000 4500 4500 4000 4000 3600 3600 2750

Displacement at nnom qV l/min 315 362 405 427 500 577 648 550

Torque Δp = 400 bar T Nm 401 512 573 679 796 1021 1146 1273

▶ Size 5 … 200 ▶ Nominal pressure: 315 bar (NG5), 400 bar (NG10-200) ▶ Peak pressure: 350 bar (NG5), 450 bar (NG10-200) ▶ Open and closed circuit


39


Axial piston motors | Motors | GoTo Europe

Axial piston variable displacement motorA6VM series 71

Features ▶ Use in mobile and stationary application ranges ▶ Axial tapered piston bent axis design ▶ Robust motor with long life cycle ▶ High start-up efficiency ▶ Good low speed behavior ▶ Large control area

Product descriptionA6VM is a variable displacement motor with axial tapered piston transmission in bent axis design for hydrostatic drives in the open and closed circuit. With axial piston units in bent axis design, the pistons are arranged diagonally to the drive shaft. The pistons are directly supported by the drive shaft and there create a pressure-dependent torque.


Technical Data Size NG 60 85 115

Displacement Vg max cm3 62.0 85.2 115.6

Speed at Vg max nnom min-1 4450 3900 3550

Displacement at nnom qv l/min 2750 332 410

Torque Δp = 450 bar T Nm 444 610 828

▶ Size 60 … 115 ▶ Nominal pressure 450 bar ▶ Peak pressure 500 bar ▶ Open and closed circuit


40


GoTo Europe | Motors | External gear motors


High performance external gear motorAZMF

Features ▶ Continuously high quality due to large series production ▶ Long life cycle ▶ Large speed range ▶ Plain bearings for high loads ▶ Optionally reversible version for 2- and 4-quadrant

operation ▶ Numerous design variations available

Product descriptionWith external gear motors, it is distinguished between motors for one direction of rotation and reversible motors. External gear motors for one direction of rotation are set up asymmetrically, i.e. the high- and low-pressure side are fixed. The reversible motors are a particularity: their high- and low-pressure chambers are separated from the bearing and shaft seal ring chamber. The leakage incurring here is discharged via a separate leakage connection.

Technical DataSize – series 1x NG 8 11 14 16 19 22

Displacement Vg cm3 8 11 14 16 19 22.5




nmax min-1 4000 3500 3000 3000 3000 3000

▶ Platform F ▶ Constant displacement ▶ Size 8 … 28 ▶ Continuous pressure up to 250 bar ▶ Intermittent pressure up to 280 bar


41


External gear motors | Motors | GoTo Europe


High performance external gear motorAZMN

Features ▶ Continuously high quality due to large series production ▶ Long life cycle ▶ Large speed range ▶ Plain bearings for high loads ▶ Optionally reversible version for 2- and 4-quadrant

operation ▶ Numerous design variations available

Product descriptionWith external gear motors, it is distinguished between motors for one direction of rotation and reversible motors. External gear motors for one direction of rotation are set up asymmetrically, i.e. the high- and low-pressure side are fixed. The reversible motors are a particularity: their high- and low-pressure chambers are separated from the bearing and shaft seal ring chamber. The leakage incurring here is discharged via a separate leakage connection.

Technical DataSize NG 20 22 25 28 32 36





nmax min-1 3000 3000 3000 3000 3000 3000

▶ Platform N ▶ Constant displacement ▶ Size 20 … 36 ▶ Continuous pressure up to 250 bar ▶ Intermittent pressure up to 280 bar


42


GoTo Europe

Mobile control units

43


Mobile control units | GoTo Europe

Pilot control unitsElectronic and hydraulic pilot control units (joysticks and foot pedals) are used for the sensitive, performance-optimized and secure control of the work hydraulics and the drive hydraulics of modern mobile machines. Various handle designs, latching and reference positions for marking working points and characteristic curves enable an ideal adjustment in the machine. Pilot control units are maintenance-free and have a long life cycle.

Power brake valvesHeavy machinery in construction, agriculture and forestry as well as municipal vehicles, vehicles for material handling and special vehicles require braking systems with a high level of operational safety with low operating force. These vehicles require servo-assisted or power braking systems to comply with the legally prescribed braking action. Power brake valves are available in modular and compact design and can be operated with displacement pumps (open center) or load-sensing hydraulic system.

44


GoTo Europe | Mobile control units | Pilot control units

Hydraulic pilot control unit with lever2TH6

Features ▶ Progressive, sensitive actuation ▶ Precise control free of play ▶ Low actuating force on the lever ▶ Rust-proof plungers ▶ Optionally available with electro-magnetic end position

locking

Product descriptionThe hydraulic pilot control units of the 2TH6 type work together based on direct operated pressure reducing valves. They are intended for the proportional-hydraulic control of directional valves as well as hydraulic pumps and motors. The pilot control units mainly consist of a control lever, two pressure reducing valves and a housing. In the non-operated state, the control lever is kept in the zero position by means of a return spring. A rubber sleeve protects the mechanical components in the housing against contamination.


Technical DataMaximum inlet pressure bar 50

Maximum tank counter-pressure bar 3

Maximum pilot flow l/min 16

Maximum hysteresis bar 1

Number of control axes 1 … 6

▶ For the control of directional valves, pumps, motors ▶ Sandwich plate design with 1 to 6 flange-mounted

control axes ▶ 2 pilot ports ▶ Nominal pressure 50 bar


45


Pilot control units | Mobile control units | GoTo Europe

Hydraulic pilot control unit in pedal designTH6R

Features ▶ Progressive, sensitive actuation ▶ Precise control free of play ▶ Protection of the control instruments by means of a

rubber sleeve ▶ Rust-proof plungers ▶ Bent or flat pedal ▶ All connections are directed downwards

Product descriptionHydraulic pilot control units of the TH6R type work on the basis of direct operated pressure reducing valves. They are intended for the proportional-hydraulic control of directional valves as well as hydraulic pumps and motors. Pilot control units mainly consist of a foot pedal, two pressure reducing valves and a housing. In the non-operated state, the foot pedal is kept in the zero position by means of a return spring.






Number of control axes 1

▶ For the control of directional valves, pumps, motors ▶ Pedal actuation of an axis ▶ 2 pilot ports ▶ Nominal pressure 50 bar


46



Hydraulic pilot control unitTH7

Features ▶ Progressive, sensitive actuation ▶ Precise control free of play ▶ 1x series

Product descriptionHydraulic pilot control units of the TH7 type work on the basis of direct operated pressure reducing valves. They are intended for the proportional-hydraulic control of directional valves as well as hydraulic pumps and motors. Pilot control units mainly consist of a lever or pedal, two pressure reducing valves and a housing. In the non-operated state, the lever or pedal is kept in the zero position by means of a return spring.







▶ For the control of directional valves, pumps, motors ▶ Various versions with lever or pedal actuation ▶ 1, 2 or 4 pilot ports ▶ Nominal pressure 50 bar


47


Pilot control units | Mobile control units | GoTo Europe

Electronic pilot control unitTHE5

Features ▶ Multi-functional electronic joystick ▶ Progressive, sensitive actuation ▶ Precise control free of play ▶ Large selection of ergonomic handles and pedals

available ▶ Many types of handles with different electrical contacts

(switching, proportional) ▶ Optionally available with resistance point for the floating

position function

Product descriptionGenerally, electronic pilot control units of the THE5 type consist of an operating unit (lever or pedal), a fixing body and a housing which contains the contactless sensors and electronic card. Mechanics and ergonomics of the electronic pilot control units are comparable to the hydraulic pilot control units. This set-up ensures a high degree of robustness. In the non-operated state, the handle is kept in the zero position by means of the return spring.


Technical DataPower supply, regulated V 5

Maximum power consumption mA 34

Proportional signal Full stroke + V 4.3

Neutral V 2.5

Full stroke − V 0.7


▶ For the control of mobile machines ▶ Version with lever or pedal actuation ▶ Up to 4 proportional axes ▶ CAN, PWM, current or voltage signal ▶ The ergonomics of the operating unit can be compared

to the hydraulic pilot control unit.


48



Electronic pilot control unitEJ

Features ▶ Compact design ▶ Progressive, sensitive actuation ▶ Precise control free of play ▶ Ergonomic, configurable handles ▶ Many types of handles with different electrical contacts

(switching, proportional)

Product descriptionGenerally, electronic pilot control units of the EJ type consist of a handle, a fixing body and a housing which contains the contactless sensors and electronic card. In the non-operated state, the handle is kept in the zero position by means of the return spring. In the versions with PWM signal or CAN, a power supply control unit is integrated by means of which it can be supplied directly from the vehicle battery.


Technical DataPower supply V 9 … 32

Maximum power consumption mA 300


▶ For the control of mobile machines, e.g. forklift, tractors ▶ Multi-functional electronic joystick ▶ Up to 4 proportional axes ▶ CAN or PWM signal


49


Power brake valves | Mobile control units | GoTo Europe

1-circuit power brake valveLT 05

Features ▶ Brake pressure, proportional to the actuation force ▶ Integrated maximum pressure limitation of the brake

circuits ▶ Ergonomic adjustment of the pedal’s angle of attack

possible ▶ Optionally available with attached LT19 or LT20 pedal ▶ All pedal versions are equipped with an anti-slip pedal

rubber pad which can be disassembled ▶ Small installation dimensions

Product descriptionThe LT 05 1-circuit power brake valve is a direct actuated pressure reducing valve in 3-way version with stepless mechanical actuation. It comprises a maximum pressure limitation of the secondary circuit and a stepless dosing capability of the brake pressure, proportional to the pedal actuation angle. Here, the actuating force is also proportional to the path of actuation.


Technical Data Maximum service brake pressure bar 160

Maximum inlet pressure bar 200

Maximum tank pressure bar 0.5

▶ Direct actuated pressure reducing valve in 3-way version with stepless mechanical actuation

▶ For construction machines, conveyors, forestry and agricultural machines, municipal vehicles, special vehicles

▶ Maximum inlet pressure 200 bar ▶ Maximal service brake pressure 160 bar ▶ For modular braking systems in modular design


50


GoTo Europe | Mobile control units | Power brake valves

2-circuit power brake valveLT 07

Features ▶ Perfect piping possible due to freely rotatable mounting

flange ▶ Brake pressure, proportional to the actuation force ▶ Synchronism due to low hysteresis ▶ Integrated maximum pressure limitation of the brake

circuits ▶ External brake pressure feedback possible

Product descriptionThe LT 07 2-circuit power brake valve is a direct operated pressure reducing valve in 3-way version with stepless mechanical actuation. It comprises a maximum pressure limitation of the secondary circuit and a stepless dosing capability of the brake pressure, proportional to the pedal actuation angle. If one of the brake circuits fails, the second brake circuit remains functional due to the mechanical contact of both control spools. The actuating force on the pedal remains unchanged.


Technical DataMaximum service brake pressure bar 140

Maximum inlet pressure bar 200


▶ Direct actuated pressure reducing valve in 3-way version with stepless mechanical actuation

▶ For mobile machines ▶ Maximum inlet pressure 200 bar ▶ Maximum service brake pressure 140 bar ▶ For modular braking systems in modular design


51


Power brake valves | Mobile control units | GoTo Europe

Accumulator charging valveLT 06

Features ▶ Quickly ready for operation ▶ Flexible connection possibilities of the accumulators ▶ Fast and simple assembly ▶ Connection possibility for downstream actuators

Product descriptionThe LT 06 accumulator charging valve or pressure cut-off valve has the function of maintaining a pressure level within specific limit values (cut-off pressure, sequencing pressure) within an accumulator circuit. The switching pressure differential amounts to approx. 18% of the cut-off pressure. The valve basically consists of the pilot control with pressure adjustment element, pressure compensator and check valve.



Maximum flow Accumulator charging cur-rent

l/min 17

Pump flow l/min 70

▶ For maintaining a prescribed pressure level in an accumulator circuit

▶ For mobile machines ▶ Maximum inlet pressure 200 bar ▶ Accumulator charging volume flow 6 … 17 l/min ▶ For modular braking systems in modular design


52


GoTo Europe | Mobile control units | Power brake valves

Hand brake valveLT 08

Features ▶ Compact hand brake valve ▶ Integrated maximum pressure limitation of the parking

brake pressure ▶ Good fine control

Product descriptionThe hand brake valve is designed as direct actuated 3-way pressure reducing valve for the use in spring-loaded accumulator braking systems. In the basic position, the flow from S to B is open, which in turn opens the spring-loaded accumulator braking system. By actuating the hand lever, the pressure is reduced directly proportionally to the path of the lever and the speed of actuation. This activates the spring-loaded accumulator braking system.




Parking brake pressure bar 25 … 125

▶ Direct operated pressure reducing valve in 3-way version with hand lever operation

▶ For the use in spring-loaded accumulator braking systems

▶ Maximum inlet pressure 200 bar ▶ Parking brake pressure 25 ... 125 bar ▶ With detent locking in actuated position


Cylinders

53


Cylinders | GoTo Europe

Rexroth cylinders are characterized by their high quality and innovative concepts, such as the precisely guided piston rod in connection with state-of-the-art sealing device technology, self-adjusting and/or adjustable end position cushioning and safety bleeding device. Proximity switches and integrated position measurement systems in connection with attached control blocks and high-response valves enable the realization of complete hydraulic axes.

54


GoTo Europe | Cylinders | Mill type cylinders

Differential cylinderCDH1

Features ▶ 5 types of mounting ▶ Piston Ø 40 … 80 mm ▶ Piston rod Ø 22 … 56 mm ▶ Maximum stroke length 2000 mm

Product descriptionDue to their robust set-up, mill type cylinders of the CDH1 series are reliable drive elements and particularly suited for the use under extreme working conditions. Typical fields of application are the general mechanical engineering, metallurgical plants and rolling mills, presses, shipbuilding or steel construction for hydraulic engineering.


▶ Component series 3X ▶ Nominal pressure 250 bar


55

For order details regarding the GoTO products, please see page 186. RE 01500, 2016-04, Bosch Rexroth AG

Mill type cylinders | Cylinders | GoTo Europe

Types of mounting 03 MP3 MP5 MF3 MF4 MT4 1)

Swivel eye at base Self-aligning clevis at base Round flange at head Round flange at base Trunnion

Configuration 04 Piston Ø mm 40 50 63 80

05 Piston rod Ø mm 22 28 28 36 36 45 45 56

06 Stroke length (L) mm max = 2000

09 Line connection / version B = according to ISO 1179-1 (pipe thread ISO 228-1)M = according to ISO 9974-1 (metric thread ISO 261)

H = flange porting pattern according to ISO 6164 tab. 2 2)

D = flange porting pattern according to ISO 6162-2 tab. 2 type 1(SAE 6000 PSI) 2; 3)

C = according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange10 Line connection /

position at head1 = top – with view onto piston rod

2 = right – with view onto piston rod3 = bottom – with view onto piston rod

4 = left – with view onto piston rod

11 Line connection / position at base

1 = top – with view onto piston rod2 = right – with view onto piston rod 4)

3 = bottom – with view onto piston rod4 = left – with view onto piston rod 4)

12 Piston rod design C = hard chromium-platedH = hardened and hard chromium-plated

N = nickel-plated and hard chromium-plated13 Piston rod end A = thread for CGAS swivel head

G = thread for CGA, CGAK swivel head and CSA plain clevisL = with mounted CGA swivel head

M = with mounted CGAK swivel headN = with mounted CSA plain clevis

S = with mounted CGAS swivel head14 End position cushioning U = without

D = both sides, self-adjustingE = both sides, adjustable

15 Seal design M = standard seal system (for HL, HLP, and HFA mineral oil)T = servo quality/reduced friction (for HL, HLP, HFA mineral oil and HFC water glycol)

G = standard seal system HFC (for HL, HLP, HFA mineral oil and HFC water glycol)L = standard seal system with guide rings (for HL, HLP, and HFA mineral oil)

R = reduced friction in heavy industry (for HL, HLP and HFA mineral oil)S = servo quality/reduced friction (for HFDR phosphate ester and HFDU polyol ester)

V = standard seal system FKM (for HFDR phosphate ester and HFDU polyol ester)16 Option W = None

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

CD H1 / / / A 3X / W

1) Always indicate dimension “XV” in plain text with orders2) Not with “MF4”3) Piston Ø 80 mm only4) Not with “MF4” and “B”, “M” or “C” line connection

56


GoTo Europe

On/off valves

57


On/off valves | GoTo Europe

Isolator valvesValves that block the flow in one direction safely and leakage-free and simultaneously allow for free flow in the opposite direction (check valves and prefill valves).

Directional valvesValves controlling the flow direction and thus the direction of movement or rotation of hydraulic actuators (directional seat valves or spool valves, direct operated or pilot-operated).

Pressure valvesValves having a pre-determined effect on the operating pressure in a system or a part of a system (pressure relief valves, pressure sequence valves, pressure cut-off valves and pressure reducing valves).

Flow control valvesValves controlling the flow and thus the speed of hydraulic actuators (throttle valves and flow control valves).

Directional cartridge valves2-way cartridge valves are elements that have been designed for a compact block design. The power part is installed in a receiving hole of the manifold according to ISO 7368 and closed with a control cover.

58


GoTo Europe | On/off valves | Isolator valves

Check valvesZ1S

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ One- and two-channel blocking function ▶ Perfect leak-tightness due to poppet made of high-

performance plastic ▶ Corrosion-resistant surface on request

Product descriptionThe valve type Z1S is a direct operated check valve in sandwich plate design. It is used for the leakage-free blocking in one direction and allows for free flow in the opposite direction.Its characteristic feature is the check valve installation set made of high-performance plastic. This ensures permanently high leak-tightness even at low operating pressures. In addition, the use of the valve with different hydraulic fluids is facilitated by the lack of internal seals.


Technical data Operating pressure pmax bar 350

Cracking pressure bar 0.5/1.5/3/5

Flow qV max l/min 40

▶ Size 6 ▶ Component series 4X ▶ Maximum operating pressure 350 bar ▶ Maximum flow 40 l/min


59


Isolator valves | On/off valves | GoTo Europe

Check valvesZ1S

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ One- and two-channel blocking function ▶ Perfect leak-tightness due to poppet made of high-

performance plastic ▶ Corrosion-resistant surface on request

Product descriptionThe valve type Z1S is a direct operated check valve in sandwich plate design. It is used for the leakage-free blocking in one direction and allows for free flow in the opposite direction.Its characteristic feature is the check valve installation set made of high-performance plastic. This ensures permanently high leak-tightness even at low operating pressures. In addition, the use of the valve with different hydraulic fluids is facilitated by the lack of internal seals.



Cracking pressure bar 0.5/3/5




60



Check valvesS

Features ▶ Threaded connection ▶ Leakage-free blocking in one direction ▶ Different opening pressures ▶ Optional surface coating

Product descriptionThe valve type S is a direct operated check valve in seat design. It is used for the leakage-free blocking in one direction and allows for free flow in the opposite direction.


Technical data Size 6 8 10 15 20 25 30

Operating pressure pmax bar 315 315 315 315 315 315 315

Cracking pressure bar Without spring; 0.5/1.5/3/5

Flow qV max l/min 18 36 60 150 250 350 450

▶ Size 6 … 30 ▶ Maximum operating pressure 315 bar ▶ Maximum flow 450 l/min


61



Check valves, pilot-operated Z2S

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ For the leakage-free blocking of one or two actuator

ports ▶ Different opening pressures ▶ With pre-opening

Product descriptionThe valve type Z2S is a pilot-operated check valve in sandwich plate design. It is used for the leakage-free blocking of one or two actuator ports, also in case of longer standstill times.Due to the two-stage set-up with increased control open ratio, safe unloading is also possible with lower pilot pressure.




Cracking pressure bar 1.5/3/6



62










Cracking pressure bar 1.5/3/6/10



63










Cracking pressure bar 3/5/7.5/10



64










Cracking pressure bar 3/5/7.5/10



65



Check valves, pilot-operatedSL

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 and ISO 5781 ▶ Pilot oil return external ▶ With or without pre-opening ▶ Different opening pressures

Product descriptionThe valve type SL is a pilot-operated check valve in seat design. It is used for the leakage-free blocking of one actuator port.Due to the pre-opening, there is a damped decompression of the pressurized liquid. Thus, possible switching shocks are avoided.




Pilot pressure pSt bar 5 … 315

Cracking pressure bar 1.5/3/6/10



66



Check valves, pilot-operatedSV

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 5781 ▶ Threaded connection ▶ With or without pre-opening ▶ Different opening pressures

Product descriptionThe valve type SV is a pilot-operated check valve in seat design. It is used for the leakage-free blocking of one actuator port.Due to the pre-opening, there is a damped decompression of the pressurized liquid. Thus, possible switching shocks are avoided.


▶ Sizes 10 and 32 ▶ Component series 4X ▶ Maximum operating pressure 315 bar ▶ Maximum flow 550 l/min

Technical data Size 10 32

Operating pressure pmax bar 315 315

Pilot pressure pSt bar 5 … 315 5 … 315

Cracking pressure bar 1.5/3/6/10 2.5/5/8/10

Flow qV max l/min 150 550


67



Check valves, pilot-operatedSL

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 5781 ▶ Threaded connection ▶ With or without pre-opening ▶ Different opening pressures

Product descriptionThe valve type SL is a pilot-operated check valve in seat design. It is used for the leakage-free blocking of one actuator port.Due to the pre-opening, there is a damped decompression of the pressurized liquid. Thus, possible switching shocks are avoided.


▶ Size 10 … 32 ▶ Component series 4X ▶ Maximum operating pressure 315 bar ▶ Maximum flow 550 l/min

Technical data Size 10 20 32

Operating pressure pmax bar 315 315 315

Pilot pressure pSt bar 5 … 315 5 … 315 5 … 315

Cracking pressure bar 1.5/3/6/10 2.5/5/7.5/10 2.5/5/8/10

Flow qV max l/min 150 350 550


68



Directional spool valves, direct operated, with solenoid actuationZ4WE

Features ▶ 4/2 and 4/3 directional shut-off valve ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ As straight-through valve or short-circuit valve ▶ Wet-pin DC or AC solenoids

Product descriptionThe Z4WE type valve is a direct operated directional shut-off valve with solenoid actuation in sandwich plate design. It controls the start, stop and direction of flow. Directional spool valves connect or isolate the connections by moving a control spool in a housing bore.






69


Directional valves | On/off valves | GoTo Europe

Directional seat valves, direct operated, with solenoid actuationSED

Features ▶ 2/2-, 3/2- or 4/2-way version ▶ Porting pattern according to ISO 4401 ▶ Blocked connection is leakage-free ▶ Solenoids with detachable coil ▶ The coil can be changed without having to open the

pressure-tight chamber ▶ Safe switching with longer standstill periods under

pressure

Product descriptionThe SED type valve is a direct operated directional seat valve with solenoid actuation. It controls the start, stop and direction of flow. Directional seat valves connect or isolate the connections by lowering or raising a sealing element (poppet, ball). Isolation is leakage-free.






70


Directional seat valves, direct operated, with solenoid actuationSED

Features ▶ 3/2- or 4/2-way version ▶ Porting pattern according to ISO 4401 ▶ Blocked connection is leakage-free ▶ Solenoids with detachable coil ▶ The coil can be changed without having to open the


pressure

Product descriptionThe SED type valve is a direct operated directional seat valve with solenoid actuation. It controls the start, stop and direction of flow. Directional seat valves connect or isolate the connections by lowering or raising a sealing element (poppet, ball). Isolation is leakage-free.





GoTo Europe | On/off valves | Directional valves


71



Directional seat valves, direct operated, with solenoid actuationSEW

Features ▶ 2/2-, 3/2- or 4/2-way version ▶ Porting pattern according to ISO 4401 ▶ Blocked connection is leakage-free ▶ Solenoids with detachable coil ▶ The coil can be changed without having to open the


pressure

Product descriptionThe SEW type valve is a direct operated directional seat valve with solenoid actuation. It controls the start, stop and direction of flow. Directional seat valves connect or isolate the connections by lowering or raising a sealing element (poppet, ball). Isolation is leakage-free.


▶ Size 6 ▶ Component series 3X ▶ Maximum operating pressure 420/630 bar ▶ Maximum flow 25 l/min

Technical data Operating pressure pmax bar 420/630



72



Directional spool valves, direct operated, with solenoid actuationWE

Features ▶ 4/3-, 4/2- or 3/2-way version ▶ High-power solenoid ▶ Porting pattern according to ISO 4401 ▶ Wet-pin DC or AC solenoids with detachable coil ▶ The coil can be changed without having to open the

pressure-tight chamber ▶ Spool position monitoring

Product descriptionThe WE type valve is a direct operated directional spool valve with solenoid actuation. It controls the start, stop and direction of flow. Directional spool valves connect or isolate the connections by moving a control spool in a housing bore.




DC flow qV max l/min 80

AC flow qV max l/min 60


73



Directional spool valves, direct operated, with solenoid actuationWE…XE

Features ▶ 4/3-, 4/2- or 3/2-way version ▶ For intended use in potentially explosive atmosphere ▶ High-power solenoid ▶ Porting pattern according to ISO 4401 ▶ Wet-pin DC or AC solenoids with detachable coil ▶ The coil can be changed without having to open the

pressure-tight chamber


More detailed information:Data sheet 23178-XE

▶ ATEX ▶ Size 6 ▶ Component series 6X ▶ Maximum operating pressure 350 bar ▶ Maximum flow 70 l/min



http://www.boschrexroth.com/various/utilities/mediadirectory/index.jsp?publication=NET&ccat_id=20000&remindCcat=on&search_action=submit&search_query=23178-XE

74




Features ▶ 4/3-, 4/2- or 3/2-way version ▶ Standard solenoid ▶ Porting pattern according to DIN 24340 form A ▶ Wet-pin DC solenoids ▶ The coil can be changed without having to open the








75



Directional spool valves, direct operated, smoothly switching, with solenoid actuationWE . .73…A12

Features ▶ 4/2- or 4/3-way version ▶ Porting pattern according to ISO 4401 ▶ Wet-pin DC solenoids with detachable coil ▶ The coil can be changed without having to open the


Product descriptionThe valve type WE . .73...A12 is a direct operated directional spool valve with solenoid actuation and smooth switching behavior. It controls the start, stop and direction of flow. By means of structural design of the control spools and solenoids, switching shocks occurring when activating and deactivating the valves are significantly reduced.Directional spool valves connect or isolate the connections by moving a control spool in a housing bore.


▶ Size 6 ▶ Component series 6X ▶ Maximum operating pressure 350 bar ▶ Maximum flow 60 l/min ▶ Smooth switching behavior




76




Features ▶ 4/3-, 4/2- or 3/2-way version ▶ High-power solenoid ▶ Porting pattern according to ISO 4401 ▶ Wet-pin DC solenoids with detachable coil ▶ The coil can be changed without having to open the

pressure-tight chamber ▶ Central connection possible via double mating

connector







77



Directional spool valves, direct operated, with fluidic actuationWH and WP

Features ▶ 4/3-, 4/2- or 3/2-way version ▶ Porting pattern according to ISO 4401 ▶ Operating methods:

– Pneumatic – Hydraulic

▶ Spool position monitoring

Product descriptionThe WH/WP type valve is a direct operated directional spool valve with hydraulic/pneumatic actuation. It controls the start, stop and direction of flow. Directional spool valves connect or isolate the connections by moving a control spool in a housing bore.






78 GoTo Europe | On/off valves | Directional valves


Directional spool valves, direct operated, with mechanical or manual operationWMR, WMRZ, WMU, WMM, WMD and WMDA


– Roller plunger – Hand lever – Rotary knob – Lockable rotary knob

▶ Spool position monitoring

Product descriptionThe WM. type valve is a direct operated directional spool valve with mechanical or manual operation. It controls the start, stop and direction of flow. Directional spool valves connect or isolate the connections by moving a control spool in a housing bore.


▶ Size 6 ▶ Component series 5X, 6X ▶ Maximum operating pressure 315 bar ▶ Maximum flow 60 l/min




Email to M. Hettinger (17/03/2016)

79

Directional spool valves, direct operated, with manual and fluidic operationWMM, WN and WP


– Hand lever – Pneumatic – Hydraulic

Product descriptionThe WMM type valve is a direct operated directional spool valve with manual actuation; the WN/WP type comprises a hydraulic/pneumatic actuation. It controls the start, stop and direction of flow. Directional spool valves connect or isolate the connections by moving a control spool in a housing bore.








80


Directional spool valves, pilot-operated, with hydraulic or electro-hydraulic actuationWH and WEH


– Electro-hydraulic – Hydraulic

▶ Spring or pressure centering, spring end position or hydraulic end position

▶ Stroke setting at main valve ▶ Switching time adjustment and spool position

monitoring

Product descriptionThe valve of type WEH is a pilot-operated directional spool valve with electro-hydraulic actuation, type WH with hydraulic actuation. It controls the start, stop and direction of flow. Directional spool valves connect or isolate the connections by moving a control spool in a housing bore.


▶ Size 10 … 32 ▶ Component series 4X, 6X, 7X ▶ Maximum operating pressure 350 bar ▶ Maximum flow 1100 l/min

Technical data Size 10 16 (22) 25 32

Operating pressure pmax bar 350/280 350/280 350/280 350 350/280

Flow qV max l/min 160 300 450 650 1100



81


Pressure relief valves, direct operated DBD

Features ▶ Subplate mounting ▶ Threaded connection ▶ As screw-in cartridge valve ▶ Adjustment types:

– Bushing with hexagon and protective cap – Rotary knob / hand wheel – Lockable rotary knob

▶ Type-examination tested safety valves according to Pressure Equipment Directive 2014/68/EU

Product descriptionThe valve type DBD is a direct operated pressure relief valve in seat design. It is used to limit a system pressure (inlet pressure) to a specified maximum value. If this adjustable maximum value is reached, the pressure relief valve will return the excessive flow to the tank.





Flow qV max l/min 50 120 120 250 250 330 330

Pressure valves | On/off valves | GoTo Europe


82


GoTo Europe | On/off valves | Pressure valves

Pressure relief valve, direct operatedZDBD and Z2DBD

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ 4 pressure ratings ▶ 5 directions of action, optional ▶ Adjustment types:

– Spindle with hexagon – Rotary knob – Lockable rotary knob with scale

▶ Corrosion-protected design

Product descriptionThe Z.DBD type valve is a direct operated pressure relief valve in sandwich plate design. It is used to limit a system pressure (inlet pressure) to a specified maximum value. If this adjustable maximum value is reached, the pressure relief valve will return the excessive flow to the tank.






83



Pressure relief valve, direct operatedZDBD and Z2DBD

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ 4 pressure ratings ▶ 5 directions of action, optional ▶ Adjustment types:

– Spindle with hexagon – Rotary knob – Lockable rotary knob with scale


Product descriptionThe Z.DBD type valve is a direct operated pressure relief valve in sandwich plate design. It is used to limit a system pressure (inlet pressure) to a specified maximum value. If this adjustable maximum value is reached, the pressure relief valve will return the excessive flow to the tank.






84


Pressure relief valves, pilot-operated ZDB and Z2DB

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ 1 or 2 pressure valve cartridges ▶ 4 pressure ratings ▶ 5 directions of action, optional ▶ Adjustment types:

– Rotary knob – Bushing with hexagon and protective cap – Lockable rotary knob with scale – Rotary knob with scale

Product descriptionThe valve type Z.DB is a pilot-operated pressure relief valve in sandwich plate design. It is used to limit a system pressure (inlet pressure) to a specified maximum value. If this adjustable maximum value is reached, the pressure relief valve will return the excessive flow to the tank.







85


Pressure relief valves, pilot-operated ZDB and Z2DB

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ 1 or 2 pressure valve cartridges ▶ 4 pressure ratings ▶ 6 circuit options ▶ Adjustment types:


Product descriptionThe valve type Z.DB is a pilot-operated pressure relief valve in sandwich plate design. It is used to limit a system pressure (inlet pressure) to a specified maximum value. If this adjustable maximum value is reached, the pressure relief valve will return the excessive flow to the tank.







86



Pressure relief valves, pilot-operated DB and DBW

Features ▶ Subplate mounting ▶ Threaded connection ▶ 5 pressure ratings ▶ Solenoid-actuated unloading via an installed directional

spool valve or directional seat valve ▶ Adjustment types:


Product descriptionThe DB/DBW type valve is a pilot-operated pressure relief valve. It is used for the limitation (DB) or limitation and solenoid-actuated unloading (DBW) of a system pressure (inlet pressure) to a prescribed maximum value. If this adjustable maximum value is reached, the pressure relief valve will return the excessive flow to the tank.






87



Pressure reducing valves, direct operatedDR

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ 5 pressure ratings ▶ Adjustment types:

– Rotary knob – Grub screw with hexagon and protective cap – Lockable rotary knob with scale – Rotary knob with scale

▶ Check valve, optional

Product descriptionThe valve type DR is a direct operated pressure reducing valve in 3-way version. It is used to keep the output pressure (actuator pressure, secondary pressure) at a constant value that lies below the variable pressure in the main circuit (inlet pressure, primary pressure).






88



Pressure reducing valves, direct operatedDR

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 5781 ▶ 4 pressure ratings ▶ Adjustment types:

– Rotary knob – Grub screw with hexagon and protective cap – Lockable rotary knob with scale – Rotary knob with scale


Product descriptionThe valve type DR is a direct operated pressure reducing valve in 3-way version. It is used to keep the output pressure (actuator pressure, secondary pressure) at a constant value that lies below the variable pressure in the main circuit (inlet pressure, primary pressure).






89



Pressure reducing valves, direct operatedZDR

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ 4 pressure ratings ▶ Adjustment types:


▶ Pressure reduction in channel A, B or P ▶ Check valve, optional

Product descriptionThe valve type ZDR is a direct operated pressure reducing valve in sandwich plate design. It is used to keep the output pressure (actuator pressure, secondary pressure) at a constant value that lies below the variable pressure in the main circuit (inlet pressure, primary pressure).






90



Pressure reducing valves, direct operatedZDR



▶ Pressure reduction in channel A, B or P ▶ Check valve, optional

Product descriptionThe valve type ZDR is a direct operated pressure reducing valve in sandwich plate design. It is used to keep the output pressure (actuator pressure, secondary pressure) at a constant value that lies below the variable pressure in the main circuit (inlet pressure, primary pressure).






91



Pressure reducing valves, pilot-operatedDR

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 5781 ▶ Threaded connection ▶ As cartridge valve ▶ 5 pressure ratings ▶ Adjustment types:



Product descriptionThe DR type valve is a pilot-operated pressure reducing valve in 3-way version. It is used to keep the output pressure (actuator pressure, secondary pressure) at a constant value that lies below the variable pressure in the main circuit (inlet pressure, primary pressure).






92


Pressure reducing valves, pilot-operatedZ3DR


– Spindle with internal hexagon and protective cap – Lockable rotary knob with scale


Product descriptionThe Z3DR type valve is a pilot-operated pressure reducing valve in sandwich plate design. It is used to keep the output pressure (actuator pressure, secondary pressure) at a constant value that lies below the variable pressure in the main circuit (inlet pressure, primary pressure).







93


Pressure cut-off valves, pilot-operatedDA

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ 4 pressure ratings ▶ Adjustment type: Bushing with hexagon and protective

cap ▶ Switching pressure differential adjustable (10% ... 50%

of the nominal value)

Product descriptionThe valve type DA is a pilot-operated pressure cut-off valve with steplessly adjustable switching pressure differential. It is used to switch the pump flow to depressurized circulation as soon as the pressure accumulator has achieved its charging pressure.







94


Throttle check valves Z2FS

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ Adjustment types:

– Setscrew with lock nut and protective cap – Lockable rotary knob with scale – Spindle with internal hexagon and scale – Rotary knob with scale

▶ For supply or discharge throttling

Product descriptionThe valve type Z2FS is a throttle check valve in sandwich plate design. It is used for the main or pilot flow limitation of one or two actuator ports.Two throttle check valves aligned symmetrically to each other limit flows in one direction and allow free return flow in the opposite direction.





GoTo Europe | On/off valves | Flow control valves


95 Flow control valves | On/off valves | GoTo Europe


Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ Adjustment types:

– Lockable rotary knob with scale – Spindle with internal hexagon and scale – Rotary knob with scale

▶ For supply or discharge throttling








96




Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ Adjustment type: Spindle with internal hexagon ▶ For supply or discharge throttling







97 Flow control valves | On/off valves | GoTo Europe


Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ Adjustment type: Spindle with internal hexagon ▶ For supply or discharge throttling








98



Throttle and throttle check valvesMG and MK

Features ▶ For pipeline installation ▶ Depending on viscosity and pressure ▶ Type MG: Throttling in both directions of flow ▶ Type MK: Throttling in one direction of flow, free flow in

opposite direction

Product descriptionThe valve types MG and MK are pressure- and viscosity-dependent throttle and throttle check valves. In type MG valves, flow is throttled in both directions of flow. By rotating the sleeve, the cross-section of the throttling point can be steplessly changed.In type MK valves, the integrated check valve only throttles the flow in one direction.





Flow qV max l/min 15 30 50 120 200 300 400


99


Flow control valves | On/off valves | GoTo Europe

2-way flow control valves2FRM

Features ▶ Subplate mounting ▶ Porting pattern according to DIN 24340 form A ▶ External closing of the pressure compensator, optional ▶ As threaded connection for control panel installation ▶ Check valve, optional ▶ Adjustment types:

– Rotary knob with scale – Lockable rotary knob with scale

Product descriptionThe valve type 2FRM is a 2-way flow control valve with mechanical operation. It is used for maintaining a constant flow, independent of temperature and pressure.In order to achieve a regulated flow through the valve in both directions, a rectifier sandwich plate type Z4S may be assembled below the flow control valve.






100



2-way flow control valves2FRM, 2FRH and 2FRW

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 6263 ▶ Operating methods:

– Mechanical – Hydraulic – Electro-hydraulic

▶ Pressure compensator stroke limitation for reducing the start-up jump, optional

Product descriptionThe valve type 2FR. is a 2-way flow control valve with mechanical, hydraulic or electro-hydraulic operation. It is used for maintaining a constant flow, independent of temperature and pressure.In order to achieve a regulated flow through the valve in both directions, a rectifier sandwich plate type Z4S may be assembled below the flow control valve.


▶ Sizes 10 and 16 ▶ Component series 3X ▶ Maximum operating pressure 315 bar ▶ Maximum flow 160 l/min



Flow qV max l/min 50 160


101


Flow control valves | On/off valves | GoTo Europe

2-way flow control valvesZ2FRM

Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ With 1 or 2 flow control cartridges ▶ Adjustment type with internal hexagon

Product descriptionThe Z2FRM type valve is a 2-way flow control valve with mechanical, hydraulic or electro-hydraulic actuation in sandwich plate design. It is used for maintaining a constant flow, independent of temperature and pressure.






102


GoTo Europe | On/off valves | 2-way cartridge valves

2-way cartridge valves, directional functionLC (cartridge valves) and LFA (control cover)

Features ▶ Standard installation according to ISO 7368 (up to size

100) ▶ Standard area ratios 2:1 and 14.3:1 ▶ “High flow” by default ▶ Valve poppet with and without damping nose

Product descriptionThe 2-way cartridge valve basically consists of an installation kit (LC) and a control cover (LFA). The installation kit with connections A and B is installed into the manifold in a receiving hole standardized according to ISO 7368 and closed with a control cover. In most cases, the control cover is simultaneously the connection from the control side of the installation kit to the pilot control valves.


▶ Size 16 … 160 ▶ Component series 2X, 6X, 7X ▶ Maximum operating pressure 420 bar ▶ Maximum flow 25,000 l/min

Technical data Size 16 25 32 40 50 63 80 100 125 160

Operating pressure pmax bar 420 420 420 420 420 420 420 420 420 420

Flow qV max l/min 320 800 1300 2200 2900 4000 6200 10600 16000 25000


103


2-way cartridge valves | On/off valves | GoTo Europe

Technical data Size 16 25 32 40 50 63 80 100

Operating pressure pmax bar 420 420 420 420 420 420 420 420

Flow qV max l/min 300 450 600 1000 2000 2500 5500 7000

2-way cartridge valves, pressure functionLC (installation kit) and LFA (control cover)

Features ▶ Attachment possibility for directional seat valve,

directional spool valve or combination ▶ Manual and/or electric-proportional pressure

adjustment possible – Integrated in the control cover – Separate pilot control valve – Diverse combination possibilities

▶ Different opening pressures ▶ Variable nozzle fittings

Product descriptionThe 2-way cartridge valve basically consists of an installation kit (LC) and a control cover (LFA). The installation kit with connections A and B is installed into the manifold in a receiving hole standardized according to ISO 7368 and closed with a control cover. In most cases, the control cover is simultaneously the connection from the control side of the installation kit to the pilot control valves.


▶ Size 16 … 100 ▶ Component series 6X, 7X ▶ Maximum operating pressure 420 bar ▶ Maximum flow 7000 l/min


104


Proportional servo valves

105


Proportional servo valves | GoTo Europe

Proportional valvesProportional valves are used as directional valves, pressure valves and flow control valves. With their integrated electronics (OBE) they reduce the required wiring and simplify the handling while at the same time providing exact reproducibility and a low manufacturing tolerance.

High-response valvesHigh-response valves are compact and robust. They boast high dynamics and closed-loop accuracy in position, velocity, pressure and force control applications.

Servo valvesServo valves are hydraulically pilot-operated 2- or 3-step directional valves. Thanks to their high dynamics they are mainly used for position, force or pressure and velocity control.

106


GoTo Europe | Proportional servo valves | Proportional directional valves

Proportional directional valves, direct operated, without electrical position feedback4WRA and 4WRAE

▶ Sizes 6 … 10 ▶ Component series 2X ▶ Maximum operating pressure 315 bar ▶ Maximum flow 75 l/min

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ Control of flow direction and size ▶ With integrated electronics (OBE) (type 4WRAE) ▶ Spring-centered control spool

Product descriptionThe valve type 4WRA(E) is a direct operated proportional directional valve for subplate mounting.Operation is effected by means of proportional solenoids. The solenoids are either controlled via external or via integrated electronics (OBE).




Rated flow qV nom l/min 7/15/30 30/60

Maximum hysteresis % ≤ 5 ≤ 5

Range of inversion % ≤ 1 ≤ 1

Response sensitivity % ≤ 0.5 ≤ 0.5

OBE operating voltage U V 24 24

OBE command value signal U V ±10 ±10

I mA 4 … 20 4 … 20

Control electronics (type WRA)

Card, analog VT-VSPA2-1 VT-VSPA2-1

Card, digital VT-VSPD-1 VT-VSPD-1

Module, analog VT-MSPA2-1 VT-MSPA2-1


107


Proportional directional valves | Proportional servo valves | GoTo Europe

Proportional directional valves, direct operated, with electrical position feedback4WRE and 4WREE

▶ Sizes 6 … 10 ▶ Component series 2X ▶ Maximum operating pressure 315 bar ▶ Maximum flow 180 l/min

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ Control of flow direction and size ▶ With electrical position feedback ▶ With integrated electronics (OBE) (type 4WREE) ▶ Spring-centered control spool

Product descriptionThe valve type 4WRE(E) is a direct operated proportional directional valve with electrical position feedback for subplate mounting.Operation is effected by means of proportional solenoids. The solenoids are either controlled via external or via integrated electronics (OBE).




Rated flow qV nom l/min 4/8/16/32 25/50/75

Maximum hysteresis % ≤ 0.1 ≤ 0.1

Range of inversion % ≤ 0.05 ≤ 0.05

Response sensitivity % ≤ 0.05 ≤ 0.05

OBE operating voltage U V 24 24

OBE command value signal U V ±10 ±10

I mA 4 … 20 4 … 20

Control electronics (type WRE)

“4/3” Card, analog VT-VRPA2-1 VT-VRPA2-2

Card, digital VT-VRPD-2 VT-VRPD-2

Module, analog VT-MRPA2-1 VT-MRPA2-1

“4/2” Card, analog VT-MRPA1-1 VT-MRPA1-1


108


GoTo Europe | Proportional servo valves | Proportional directional valves

Proportional directional valves, pilot-operated, without electrical position feedback4WRZ and 4WRZE


Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ With integrated electronics (OBE) with type 4WRZE ▶ Pilot control by means of a 3-way pressure reducing

valve ▶ Spring-centered main control spool with anti-rotation

feature ▶ Different control spool overlaps possible

Product descriptionThe valve type 4WRZ(E) is a pilot-operated proportional directional valve for subplate mounting.Operation is effected by means of proportional solenoids. The solenoids are either controlled via external or via integrated electronics (OBE).


Technical data Size 10 16 25 32 52Operating pressure (port P) pmax bar 315 350 350 350 350

Rated flow qV nom l/min 25, 50, 85 100, 125, 150, 180

220, 325 360, 520 1000

Maximum hysteresis % 6 6 6 6 6OBE operating voltage U V 24 24 24 24 24OBE command value signal U V ±10 ±10 ±10 ±10 ±10

I mA 4 … 20 4 … 20 4 … 20 4 … 20 4 … 20Control electronics (type WRZ)

Card, analog VT-VSPA2-1Card, digital VT-VSPD-1Module, analog VT 11118


109


Proportional directional valves | Proportional servo valves | GoTo Europe

Proportional directional valves, pilot-operated, with integrated electronics (OBE) and electrical position feedback4WRKE


Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ With integrated electronics (OBE) ▶ Pilot control by means of a 3-way proportional

directional valve ▶ Spring-centered main control spool ▶ Different control spool overlaps possible

Product descriptionThe valve type 4WRKE is a pilot-operated proportional directional valve for subplate mounting.Operation is effected by means of proportional solenoids. The solenoids are either controlled via integrated electronics (OBE).


Technical data Size 10 16 25 27 32 35Operating pressure pmax bar 315 350 350 210 350 350Rated flow qV nom l/min 25, 50, 100 125, 200 220, 350 500 400, 600 1000Maximum hysteresis % 1 1 1 1 1 1OBE operating voltage U V 24 24 24 24 24 24OBE command value signal

U V ±10 ±10 ±10 ±10 ±10 ±10

I mA 4 … 20, ±10 4 … 20, ±10 4 … 20, ±10 4 … 20, ±10 4 … 20, ±10 4 … 20, ±10


110


GoTo Europe | Proportional servo valves | Proportional pressure valves

Proportional pressure relief valves, direct operated, without/with integrated electronics (OBE)DBET and DBETE


Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ Valve for the limitation of a system pressure ▶ With integrated electronics (OBE) with type DBETE ▶ Little manufacturing tolerance of the command value

pressure characteristic curve

Product descriptionThe valve type DBET(E) is a direct operated pressure relief valve in seat design. Operation by means of a proportional solenoid with central thread and detachable coil. The solenoids are either controlled via external or via integrated electronics (OBE). Dependent on the electric command value, the system pressure to be limited can be steplessly set.


Technical data Operating pressure pmax bar 420Flow qV max l/min 2Maximum hysteresis % < 4Step response 0 … 100% Tu+Tg ms 80Step response 100 … 0% Tu+Tg ms 80OBE operating voltage U V 24OBE command value signal U V 0 … 10

I mA 4 … 20Control electronics (type DBET)

Card, analog VT-VSPA1-2Card, digital VT-VSPD-1Module, analog VT-MSPA1-1Connector, analog VT-SSPA1-1


111


Proportional pressure valves | Proportional servo valves | GoTo Europe

Proportional pressure relief valves, direct operated, with integrated electronics (OBE)DBETA


▶ Pressure-controlled ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ Integrated pressure sensor ▶ Actual pressure value can be read via analog output ▶ Pressure controller adjustable for various applications ▶ Pressure controller adjustable for various applications ▶ Linear command value pressure characteristic curve ▶ CE conformity according to EMC Directive 2004/108/EC

Product descriptionThe DBETA type valve is a direct operated pressure relief valve in seat design. Operation by means of a proportional solenoid with central thread and detachable coil. The solenoids are controlled via integrated electronics (OBE). Dependent on the electric command value, the system pressure to be limited can be steplessly set.


Technical data Operating pressure pmax bar 500Flow qV max l/min 5Maximum hysteresis % < 1Step response 10 … 90% Tu+Tg ms 165Step response 90 … 10% Tu+Tg ms 88OBE operating voltage U V 24OBE command value signal U V 0 … 10

I mA 4 … 20


112


Proportional pressure relief valves, pilot-operatedDBE, DBEE, ZDBE and ZDBEE


Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ Valve for the limitation of a system pressure ▶ Integrated electronics (OBE) for type (Z)DBEE ▶ Little manufacturing tolerance of the command value

pressure characteristic curve ▶ Valve and control electronics from a single source

Product descriptionThe (Z)DBE(E) type valve is a pilot-operated pressure relief valve. Operation by means of a proportional solenoid with central thread and detachable coil. The solenoid is either controlled via external or via integrated electronics (OBE). Dependent on the electric command value, the system pressure to be limited can be steplessly set.


Technical data Operating pressure pmax bar 350Flow qV max l/min 30Maximum hysteresis % ±3Step response 0 … 100% Tu+Tg ms 130Step response 100 … 0% Tu+Tg ms 110OBE operating voltage U V 24OBE command value signal U V 0 … 10

I mA 4 … 20Control electronics (type (Z)DBEE)

Card, analog VT-VSPA1-2Card, digital VT-VSPD-1Module, analog VT-MSPA1-1Connector, analog VT-SSPA1-1



113


Proportional pressure relief valves, pilot-operatedDBEM and DBEME


Features ▶ Subplate mounting ▶ Porting pattern according to ISO 6264 ▶ Valve for the limitation of a system pressure ▶ Integrated electronics (OBE) for type DBEME ▶ Little manufacturing tolerance of the command value

pressure characteristic curve ▶ Valve and control electronics from a single source ▶ Maximum pressure limitation

Product descriptionThe valve type DBEM(E) is a pilot-operated pressure relief valve. Operation by means of a proportional solenoid with central thread and detachable coil. The solenoid is either controlled via external or via integrated electronics (OBE). Dependent on the electric command value, the system pressure to be limited can be steplessly set.


Technical data Size 10 25 32Operating pressure pmax bar 350 350 350Flow qV max l/min 275 550 700Maximum hysteresis % ≤ 5 ≤ 5 ≤ 5Step response 10 to 90% Tu+Tg ms 100 100 100Step response 90 to 10% Tu+Tg ms 100 100 100OBE operating voltage U V 24 24 24OBE command value signal U V 0 … 10 0 … 10 0 … 10

I mA 4 … 20 4 … 20 4 … 20Control electronics (type DBEM)

Card, analog VT-VSPA1-2 VT-VSPA1-2 VT-VSPA1-2Card, digital VT-VSPD-1 VT-VSPD-1 VT-VSPD-1Module, analog VT-MSPA1-1 VT-MSPA1-1 VT-MSPA1-1Connector, analog VT-SSPA1-1 VT-SSPA1-1 VT-SSPA1-1



114



Proportional pressure reducing valves, direct operatedDREP and DREPE


Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ Valve for controlling pressure and direction of a flow ▶ With integrated electronics (OBE) with type DREPE ▶ Spring-centered control spool ▶ Manual override, optional

Product descriptionThe valve type DREP(E) is a direct operated pressure reducing valve. Operation by means of a proportional solenoid with central thread and detachable coil. The solenoids are either controlled via external or via integrated electronics (OBE).


Technical data Operating pressure pmax bar 100Flow qV max l/min 15Maximum hysteresis % 5OBE operating voltage U V 24OBE command value signal U V ±10

I mA 4 … 20Control electronics (type DREP)

Card, analog VT-VSPD1Module, analog VT 11118


115



Proportional pressure reducing valves, pilot-operatedDRE, DREE, ZDRE and ZDREE

▶ Size 6 ▶ Component series 1X ▶ Maximum operating pressure 210 bar (DRE);

315 bar (ZDRE) ▶ Maximum flow 30 l/min

Features ▶ Subplate mounting ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ Valve for pressure reduction in ports A and P1 with

pressure limitation ▶ Integrated electronics (OBE) with type DREE and ZDREE ▶ Little manufacturing tolerance of the command value

pressure characteristic curve

Product descriptionThe valve types DRE(E) and ZDRE(E) are electrically pilot-operated 3-way pressure reducing valves with pressure limitation of the actuator. Operation is effected by means of proportional solenoid. The solenoid is either controlled via external or via integrated electronics (OBE).


Technical data Operating pressure pmax bar 210Flow qV max l/min 30Maximum hysteresis % ±2.5OBE operating voltage U V 24OBE command value signal U V 0 … 10

I mA 4 … 20Control electronics (type DRE and ZDRE)

Card, analog VT-VSPA1-10Card, digital VT-VSPD-1Module, analog VT-MSPA1-10


116



Proportional pressure reducing valves, pilot-operatedZDRE and ZDREE


Features ▶ Sandwich plate valve ▶ Porting pattern according to ISO 4401 ▶ Valve for reducing a system pressure ▶ With integrated electronics (OBE) with type ZDREE ▶ Linear pressure/command value characteristic curve

Product descriptionThe valve type ZDRE(E) is an electrically pilot-operated 3-way pressure reducing valve with pressure limitation of the actuator. Operation is effected by means of proportional solenoid. The solenoid is either controlled via external or via integrated electronics (OBE).


Technical data Operating pressure pmax bar 315Flow qV max l/min 80Maximum hysteresis % ±3OBE operating voltage U V 24OBE command value signal U V 0 … 10

I mA 4 … 20Control electronics (type ZDRE)

Card, analog VT-VSPA1-11Card, digital VT-VSPD-1Module, analog VT-MSPA1-11


117



Proportional pressure reducing valves, pilot-operated, with integrated electronics (OBE) and position feedbackDREBE


Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ Valve for reducing a system pressure ▶ With integrated electronics (OBE)

Product descriptionThe valve type DREBE is a pilot-operated 3-way pressure reducing valve. It is actuated by a position-controlled proportional solenoid with integrated electronics (OBE). Depending on the command value, the pressure in A (actuator) can be steplessly set and reduced.


Technical data Operating pressure (P) pmax

bar 315

Operating pressure (T) pmaxbar 250


Maximum hysteresis % ≤ 1

OBE operating voltage U V 24

OBE command value signal U V 0 … 10

I mA 4 … 20


118


Directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE)4WRPEH

▶ Size 6 ▶ Component series 3X ▶ Maximum operating pressure 350 bar ▶ Maximum flow 40 l/min (∆p = 70 bar)

Product descriptionThe valve type 4WRPEH is a single-side direct operated, 4/4 directional control valve with electrical position feedback and integrated electronics (OBE) in control spool and sleeve design. The directional control valve is used in force, position, velocity and pressure control applications.


Technical data Operating pressure pmax

bar 350

Rated flow qV noml/min 4/12/15/24/25/40

Maximum hysteresis % < 0.1


OBE command value signal U V ±10

I mA 4 … 20

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ Control of flow ▶ Electrical position feedback and integrated electronics

(OBE), calibrated in the plant ▶ Flow characteristics with linear or inflected

characteristic curve ▶ Preferred position when switched off, optional

GoTo Europe | Proportional servo valves | Directional control valves


119 Directional control valves | Proportional servo valves | GoTo Europe


Directional control valves, direct operated, with electrical position feedback4WRPEH

▶ Size 10 ▶ Component series 2X ▶ Maximum operating pressure 315 bar ▶ Maximum flow 100 l/min (∆p = 70 bar)

Features ▶ Subplate mounting ▶ Porting pattern according to ISO 4401 ▶ Control of flow direction and size ▶ Electrical position feedback and integrated electronics

(OBE), calibrated in the plant ▶ Flow characteristics with linear or inflected

characteristic curve ▶ Preferred position when switched off, optional

Product descriptionThe valve type 4WRPEH is a single-side direct operated, 4/4 directional control valve with electrical position feedback and integrated electronics (OBE) in control spool and sleeve design. The directional control valve is used in force, position, velocity and pressure control applications.


Technical data Operating pressure pmax

bar 315

Rated flow qV noml/min 50/100

Maximum hysteresis % < 0.2


OBE command value signal U V ±10

I mA 4 … 20


120


GoTo Europe | Proportional servo valves | Directional control valves

Directional control valves, pilot-operated, with integrated electronics (OBE) and electrical position feedback4WRLE

▶ Size 10 … 35 ▶ Component series 4X ▶ Maximum operating pressure 350 bar ▶ Rated flow 200 … 1500 l/min (∆p = 10 bar)

Features ▶ Reliable – proven and robust design ▶ Safe

– The control spool of the pilot control valve is in the “fail safe” position when the unit is switched off

– The control spool of the main valve is in the spring-centered central position and/or in the offset position

▶ High quality – control spool and sleeve of the pilot control valve in servo quality

▶ Flexible – suitable for position, velocity and pressure control

▶ Precise – high response sensitivity and little hysteresis

Product descriptionThe valve type 4WRLE is a pilot-operated 4/3 directional control valve with electrical position feedback and integrated electronics (OBE). The pilot control valve is a position-controlled type 4WRPEH valve.

Technical data Size 10 16 25 27 35

Operating pressure pmaxbar 350 350 350 270 350

Rated flowqV nom

l/min 60/100 200/250 350/400 430/600 1000/1200/ 1500

Maximum hysteresis % 0.1 0.1 0.1 0.1 0.1

OBE operating voltage U V 24 24 24 24 24

OBE command value signal U V ±10 ±10 ±10 ±10 ±10

I mA 4 … 20 4 … 20 4 … 20 4 … 20 4 … 20



Control blocks and plates

121


Control blocks and plates | GoTo Europe

SubplatesSubplates are used for the installation of subplate-mounted valves with a porting pattern according to DIN/ISO for front panel mounting.

Cover platesCover plates are used for diverting working channels, replacing subplate-mounted valves with cartridge valves or for closing connections on manifolds.

122


GoTo Europe | Control blocks and plates | Subplates

SubplatesG06A

Features ▶ Porting pattern according to DIN 24340 form A (without

locating hole), ordering code .../01 ▶ Use with directional spool valves and directional seat

valves, proportional directional valves, flow control valves, releasable check valves and pressure sequence valves, pressure cut-off valves and pressure relief valves

Product descriptionSubplates are used for the installation of pressure valves, flow control valves and directional valves for subplate mounting. The back of the plate is equipped with internal threads for fittings of pipelines and hose lines.



▶ Size 6 ▶ Maximum operating pressure 350 bar


123


Subplates | Control blocks and plates | GoTo Europe

SubplatesG10A

Features ▶ Porting pattern according to ISO 4401 ▶ Use with directional spool valves and directional seat

valves and proportional directional valves




Technical data Type G 534, G 535, G 536 G 66, G 67 G 292, G 308, G 377, G 378Operating pressure pmax bar 315 420 630


124


SubplatesG10E

Features ▶ Porting pattern according to DIN 24340 form E and

ISO 6264 ▶ Use with mechanically adjustable pressure valves and

proportional pressure relief valves





GoTo Europe | Control blocks and plates | Subplates


125


Cover platesHSA 06

Features ▶ Porting pattern according to DIN 24340 form A and

form J4 ▶ Porting pattern according to ISO 4401

Product descriptionThe cover plates are used for closing a connection diagram. Various functions, such as reserve connection cover on manifolds, vario plates and control plates, diverting and flushing functions, supply and measuring functions or stop plates with valves, are available.


▶ Size 6 ▶ Component series 3X ▶ Maximum operating pressure 315 bar


Cover plates | Control blocks and plates | GoTo Europe


126


Manifolds HSR

Features ▶ Joint pump and tank port, lead out at both front sides of

the manifold ▶ Separate actuator port A and B, optionally at the side or

at the bottom ▶ Optional measuring ports in the actuator ports A and B

Product descriptionManifolds are the base element for ready for connection controls in vertical stacking design. On each station, highly compact hydraulic controls can be built using vertically stackable sandwich plate valves in connection with on/off or proportional servo valves.


▶ Size 06 ▶ Component series 25, 35 ▶ Maximum operating pressure 315 bar ▶ 1 … 10 stations


GoTo Europe | Control blocks and plates | Manifolds


127


Manifolds HSR

Features ▶ Joint pump and tank port, lead out at both front sides of

the manifold ▶ Separate actuator port A and B, optionally at the side or

at the bottom ▶ Optional measuring ports in the actuator ports A and B

Product descriptionManifolds are the base element for ready for connection controls in vertical stacking design. On each station, highly compact hydraulic controls can be built using vertically stackable sandwich plate valves in connection with on/off or proportional servo valves.


▶ Size 10 ▶ Component series 15, 35 ▶ Maximum operating pressure 315 bar ▶ 1 ... 8 stations


Manifolds | Control blocks and plates | GoTo Europe


128


GoTo Europe

Electronics

129


Electronics | GoTo Europe

Suitable analog or digital amplifier cards in Euro-card format and analog amplifiers in modular design or connector design that have been adapted to the valve technology are available to realize controlled or regulated drives.Rexroth provides a unique complete, scalable portfolio of digital control electronics and motion controllers – from 1-axis controllers to high-performance multi-axis control – which are able to connect almost any number of axes via cross communication.Integrated software is adapted to the particularities of the hydraulics and enables commissioning, parameterization and diagnosis.

With BODAS, Rexroth offers a suitable and unique system for the electronic control of mobile work machines.The BODAS system is characterized by its consistent modular architecture with matched interfaces. Therefore, all components can be easily integrated. Thus, effective machine controls can be developed quickly and cost-effectively. The core pieces of the BODAS hardware kit are the tested, freely programmable RC control units. Sensors, displays and joysticks complete the BODAS hardware kit.The BODAS system benefits from the close cooperation between Rexroth and Bosch. This “Bosch factor” in the development, testing and automotive mass production ensures a stable and outstandingly high product quality. It contributes to your machine’s high degree of availability in rough operating conditions.

130


GoTo Europe | Electronics | Valve amplifiers

Valve amplifiers for proportional pressure and proportional flow control valvesVT-SSPA1-5

▶ Component series 2X ▶ Analog, connector design ▶ For valves:

DBETX-1X, DBE 6X-1X, DBE 10Z-1X DRE 6X-1X, DRE 10Z-1X, 2FREX...-1X, 3FREX...-1X

Features ▶ Compact design ▶ Differential input ▶ Adjustable ramp time, sensitivity, zero point and dither

frequency ▶ LED indicator for supply voltage ▶ Valve-side plug-in connector according to

EN 175301-803

Product descriptionThe type VT-SSPA1-5...-2X amplifier is used to control proportional pressure and proportional flow control valves without electrical position feedback. It is connected directly with the solenoid plug of the valve. The amplifier output supplies a current-controlled signal.


Technical data Operating voltage UB VDC 24Command value inputs U V 0 … 10

I mA 4 … 20Output Imax A 0.8/2.5Ramp time t s 0.06 … 5 Ambient temperature range ϑ °C –20 … +70Protection class IP65Electrical connection Screw terminals


131


Valve amplifiers | Electronics | GoTo Europe

Analog amplifier moduleVT-MSPA1-1, VT-MSPA1-10, VT-MSPA1-11


Features ▶ Differential input ▶ Ramp generator up and down is separately adjustable ▶ Zero point potentiometer ▶ 1 command value attenuator ▶ Characteristic curve generator ▶ Measuring sockets for the pressure command value and

the actual current value ▶ LED indicator for the “ready for operation” status ▶ Top hat rail mounting

Product descriptionThe analog amplifier modules of the type VT-MSPA1-1, VT-MSPA1-10 and VT-MSPA1-11 are used for the control of direct operated proportional pressure valves without electronic feedback.


Technical data Type VT-MSPA1-1 VT-MSPA1-10 VT-MSPA1-11Operating voltage UB VDC 24 (+40% –10%) 24 (+40% –10%) 24 (+40% –10%)Command value inputs U V ±10 ±10 ±10Output Imax A 1.9 1.9 1.9Ramp time t s 80 ms...5 s 210 ms…5 s 160 ms…5 sAmbient temperature range ϑ °C 0 ... +50 0 ... +50 0 ... +50Protection class IP20 IP20 IP20Electrical connection 6 screw terminals 6 screw terminals 6 screw terminals

http://www.boschrexroth.com/various/utilities/mediadirectory/index.jsp?publication=NET&ccat_id=20000&remindCcat=on&search_action=submit&search_query30223

132



Valve amplifier for proportional directional valvesVT-MSPA2-1

▶ Component series 1X ▶ Analog, modular design ▶ For valves:

4WRA 6...-2X, 4WRA 10...-2X,

Features ▶ Selector switch for valve type ▶ Differential input, inputs for enabling and inverting ▶ Adjustable ramp time, step level and maximum solenoid

current ▶ LED indicator for "ready for operation" status and

enabling ▶ Top hat rail mounting

Product descriptionThe amplifier type VT-MSPA2-1 is used to controlProportional directional valves without electrical position feedback. The step function ensures fast passing of the overlap. The two amplifier outputs supply current-controlled signals.


Technical data Operating voltage UB VDC 24Command value input U V ±10Digital inputs U V 24Output (adjustable) Imax A 0 … 2.5 Ramp time t s 0.02 … 5 Step level % 0 … 50 Ambient temperature range ϑ °C 0 … +50Protection class IP20Electrical connection Screw terminals


133



Valve amplifiers for proportional pressure valvesVT 11131 and VT 11132

▶ Component series 1X ▶ Analog, modular design ▶ VT 11131 for valves:

(Z)DBE 6-1X, DBE(M) 10-3X, DBE(M) 10-5X, DBE(M) 20-3X, DBE(M) 20-5X and ZDRE 10-1X

▶ VT 11132 for valves: (Z)DRE 6-1X

Features ▶ Differential input ▶ Adjustable ramp times, step level and maximum

solenoid current ▶ LED indicator for solenoid current ▶ Top hat rail mounting

Product descriptionThe type VT 11131 and VT 11132 amplifiers are used to control proportional pressure valves without electrical position feedback. The ramp time is separately adjustable for upwards and downwards ramps. The amplifier output supplies a current-controlled signal.


Technical data Operating voltage UB VDC 24Command value input U V 0 ... 10Output Imax A 1.6Ramp time t s 0.05 … 5 Ambient temperature range ϑ °C 0 … +50Protection class IP20Electrical connection Screw terminals


134



Valve amplifier for proportional directional valves and proportional pressure valvesVT 11118

▶ Component series 1X ▶ Analog, modular design ▶ For valves:

4WRA...-1X, ...WRZ... as of component series 5X, 3DREP6...-2X

Features ▶ Selector switch for valve type ▶ Differential input, two enable inputs ▶ Adjustable ramp time, step level and maximum solenoid

current ▶ LED indicator for supply voltage and enabling ▶ Top hat rail mounting

Product descriptionThe type VT 11118-1X amplifier is used to control proportional directional valves and proportional pressure valves without electrical position feedback. The step function ensures fast passing of the overlap in directional valves. The two amplifier outputs supply current-controlled signals.


Technical data Operating voltage UB VDC 24Command value input U V ±10Digital inputs U V 24Output (adjustable) Imax A 1.0/1.75Ramp time t s 0.05 … 5 Ambient temperature range ϑ °C 0 … +50Protection class IP20Electrical connection Screw terminals


135



Valve amplifiers for proportional pressure valves VT-VSPA1(K)-1

▶ Component series 1X ▶ Analog, Euro-card format ▶ For valves:

DBEP 6(A/B)-1X, DBE(M) 10-3X, DBE(M) 20-3X, DBE(M) 10-5X, DBE(M) 20-5X, DBE(M) 30-3X, (Z)DBE 6...-1X

Features ▶ One differential input ▶ Model T5 with 5 ramps and quadrant recognition ▶ Adjustable ramp times, pilot current and maximum

solenoid current ▶ LED indicator for "ready for operation"

Product descriptionThe type VT-VSPA1(K)-1 amplifier is used to control proportional pressure valves without electrical position feedback. The command values are preset via a differential input or a non-isolated input. The ramp time is separately adjustable for upwards and downwards ramps. The amplifier output supplies a current-controlled signal.


Technical data Operating voltage UB VDC 24Command value inputs U V ±10

I mA 4 … 20Digital inputs U V 24Output Imax A 1.6Ramp time t s 0.02 … 50 Ambient temperature range ϑ °C 0 … +50Protection class IP20Electrical connection 48-pole male multipoint connector, DIN 41612, design F


136



Valve amplifiers for proportional directional valves and proportional pressure valves VT-VSPA2-1-2X/V0/T...

▶ Component series 2X ▶ Analog, Euro-card format ▶ For valves:

4WRA, component series 2X, 4WRZ, from component series 7X, 3DREP6, component series 2X,

Features ▶ One differential input, four callable inputs, input for

ramp time ▶ Digital inputs for enabling, ramp, inverting and

command value call-up ▶ Model T5 with 5 ramps and quadrant recognition ▶ Adjustable ramp times and sensitivity ▶ Clock frequency, step level and maximum current can be

selected ▶ LED indicator for supply voltage, enabling, inverting,

ramp

Product descriptionThe type VT-VSPA2-1-2X/V0/T... amplifier is used to control proportional directional valves and proportional pressure valves without electrical position feedback. The command values are preset via a differential input or four callable, adjustable inputs. The step function ensures fast passing of the overlap in directional valves. The two amplifier outputs supply current-controlled signals.


Technical data Operating voltage UB VDC 24Command value inputs U V ±10

I mA 4 … 20Digital inputs U V 24Output Imax A 2.5Ramp time t s 0.02 … 50 Ambient temperature range ϑ °C 0 … +50Protection class IP20Electrical connection 48-pole male multipoint connector, DIN 41612, design F


137


Valve amplifier for proportional directional valves with electrical position feedbackVT-MRPA2, VT-MRPA1

▶ Component series 1X ▶ Analog, modular design ▶ VT-MRPA2 for valves with two solenoids ▶ VT-MRPA1 for valves with one solenoid ▶ For valves:

4WRE 6...-2X, 4WRE 10...-2X,

Features ▶ Command value input (differential input) ▶ Enable input ▶ Input for electrical position feedback ▶ Adjustable ramp time, step level and maximum solenoid

current ▶ LED indicator for "ready for operation" status and

enabling ▶ Top hat rail mounting

Product descriptionThe amplifiers type VT-MRPA2 and VT-MRPA1 are used to control proportional directional valves with electrical position feedback. The step function ensures fast passing of the overlap.The position controller regulates the control spool position. The two amplifier outputs supply current for the valve solenoids.


Technical data Type VT-MRPA2 VT-MRPA1Operating voltage UB VDC 24 24Command value input U V ±10 0 … 10Digital inputs U V 24 24Output (adjustable) Imax A 0 … 2.5 0 … 2.5 Ramp time t s 0.02 … 5 0.02 … 5 Step level % 0 … 50 0 … 50Ambient temperature range ϑ °C 0 … +50 0 … +50Protection class IP20 IP20Electrical connection Screw terminals Screw terminals



138




Digital control electronics for the A4VS... axial piston pumps with HS4 adjustmentVT-VPCD

▶ Component series 1X ▶ The HS4 adjustment is used for the electro-hydraulic

swivel angle and pressure control as well as for the power limitation of axial piston variable displacement pumps.

Product descriptionThe VT-VPCD type control electronics is used for the control of the A4VS... axial piston pump with HS4 adjustment.


Technical data Operating voltage UB VDC 24Command value inputs U V ± 10Digital inputs U V 16Output Imax A 30Ambient temperature range ϑ °C 0 ... 50Electrical connection 64-pole male multipoint connector, DIN 41612, design G

Features ▶ Digital control electronics for A4...HS4 adjustment ▶ Controller variants:

– Swivel angle control – Pressure control – Power limitation – Master-slave (controller)

▶ Bus connection (PROFIBUS DP) ▶ BODAC operating software


139




Connector switching amplifier with pulse width modulation (PWM)VT-SSBA1

▶ Component series 1X ▶ CE conformity

Features ▶ Fast switching:

Control of hydraulic on/off valves with 12 V solenoids ▶ Energy savings:

Power reduction in the control of hydraulic on/off valves with 24 V solenoids

▶ Reduction in the coil temperature of at least 30 °C with 100% duty cycle (with energy savings)

Product descriptionThe connector switching amplifier, type VT-SSBA1, with pulse width modulation (PWM) is used for the control of on/off valves of the type WE 6 and WE 10 with 12 V and/or 24 V direct current solenoids. By using the connector switching amplifier, the switching time is reduced by approx. 50% in directional valves with 12 V solenoids, or power savings of approximately 40% are achieved in directional valves with 24 V solenoids.

Technical data Operating voltage UB VDC 24 ± 10%Control voltage (“IN” release) UIN V 10 ... 30 ON

UIN V < 3.5 OFFControl current (“IN” release) IIN mA 2.5 ... 12Holding current Imax A 2PMV frequency fmax Hz PWM operation 300 ... 500Pulse width modulation– Fast switching 40% ON– Energy savings 60% ONAmbient temperature range ϑ °C –20 … +60 Protection class IP65, IP67Electrical connection Potted-in cable with open end


140


GoTo Europe | Electronics | Motion

More detailed information:Data sheet 30543, www.boschrexroth.com/HACD

Digital control electronicsVT-HACD-3

▶ Component series 2X ▶ CE conformity

Features ▶ Controller variants

– Position control – Force control – Pressure control – Substitutional position/pressure or position/force

control – Velocity control

▶ Bus connection (PROFIBUS DP, PROFINET RT, EtherNet/IP)

▶ Digital positional transducer: absolute (SSI) or incremental

Product descriptionThe digital axis control VT-HACD..2X is a parameterizable control electronics system of up to 3 control loops.

Technical data Operating voltage UB VDC 18 ... 30Scan time msec 2Analog inputs 6 x current / voltage configurable / 12 Bit resolutionAnalog output 1 x current / 1 x voltage / 14 Bit resolution Ambient temperature range ϑ °C 0 … 50 Protection class IP20


141


Sensor technology and signal transmitters | Electronics | GoTo Europe

Pressure transducers for hydraulic applicationsHM20

▶ Component series 2X ▶ Maximum operating pressure 630 bar

Features ▶ Sensor with thin film measuring cell ▶ Components that are in contact with the media are

made of stainless steel ▶ Operational safety due to high bursting pressure,

reversed polarity, overvoltage and short-circuit protection

▶ Excellent non-repeatability < 0.05% ▶ cULus-listed

Product descriptionThe pressure transducer is used for monitoring and controlling pressures in hydraulic systems. It transforms the measured pressure into a normalized, linear, electrical output signal.


Technical data Operating voltage U VDC 16 … 36Output signals U V 0.1 … 10

I mA 4 … 20 Pressure measuring range p bar 0 ... 10/50/100/160/250/315/400/630Accuracy class 0.5Setting time (10 … 90%) t ms < 1Temperature coefficient % < 0.1 / 10 KHydraulic fluid temperature range ϑ °C –40 … +90Ambient temperature range ϑ °C –40 … +85Protection class IP65/IP67Electrical connection M12 connector, 4-polePressure port G1/4


142 GoTo Europe | Electronics | Sensor technology and signal transmitters

Electronic pressure switch with digital displayHEDE10

▶ Component series 2X ▶ Maximum operating pressure 600 bar ▶ Variants

– HEDE10.../1/: 1 switching and 1 analog output – HEDE10.../2/: 2 switching outputs

Features ▶ Ceramic/capacitive sensor ▶ Components in contact with the media are made of

stainless steel, ceramics and FKM ▶ Compact design ▶ Status LEDs ▶ cULus approval

Product descriptionThe electronic pressure switch of the HEDE 10... type is used for measuring pressures in hydraulic systems as well as for transforming the measured values into electronic signal values.With large LED display for indicating the applied pressure values and the set parameters.

Technical data Operating voltage UB VDC 18 ... 36Output Switching output mA Loadable up to 250

Rise time (10... 90%) ms 3Analog output V 0 ... 10 V or 4 ... 2 mA (switchable)

Pressure ratings p bar 100/250/400/600Accuracy class 1.0Repeatability 0.1%Hydraulic fluid temperature range ϑ °C -25 … +80 Ambient temperature range ϑ °C -20 ... +80 Protection class IP67Electrical connection M12 device plug, 4-polePressure port G1/4a

More detailed information:Data sheet 30276, 30278



143 Sensor technology and signal transmitters | Electronics | GoTo Europe

Electronic pressure switch with two antivalent switching outputsHEDE 11


Features ▶ High bursting pressure range ▶ Components in contact with the media made of

stainless steel and FKM ▶ High long-term stability ▶ Compact design ▶ Two antivalent switching outputs ▶ Status LEDs ▶ cULus approval

Product descriptionThe electronic pressure switch of the HEDE 11 type is used for measuring pressures in hydraulic systems as well as for transforming the measured values into electronic signal values.The setting of the switching point and switch-back point is made via two ideally readable adjusting rings.

Technical data Operating voltage UB VDC 18 ... 36Switching output mA Loadable up to 250 mAPressure ratings p bar 100/250/400Hydraulic fluid temperature range ϑ °C -25 … +80Ambient temperature range ϑ °C -20 … +80Protection class IP67Electrical connection M12 device plug, 4-pole, without mating connectorPressure port G1/4i




144


GoTo Europe | Electronics | Sensor technology and signal transmitters

Hydro-electric piston type pressure switchesHED 8


Features ▶ For subplate mounting/pipeline installation, flange

connection or as vertical stacking element with sandwich plates

▶ 5 pressure ratings ▶ 4 adjustment types ▶ Micro switch with NC/NO contact function ▶ Switching of currents from 1 mA to 2 A ▶ UL recognized component, CCC-certified

Product descriptionThe mechanical pressure switch is used for monitoring the pressures in hydraulic systems. Type HED 8 is a piston type pressure switch which actuates a micro switch if the switching point is exceeded. This micro switch switches a connected voltage potential-free. The switching points can be set via a spindle or a rotary knob with/without scale.


Technical data Maximal contact load, resistive U (I) VDC (A) 24 (2)

VAC (A) 250 (2)Pressure ratings p bar 50/100/200/350/630Hydraulic fluid temperature ranges ϑ °C –40 … +80, depending on the seal materialElectrical connection K14 EN 175301-803, large cubic connectorElectrical connection K35 M12 x 1, A coding, 4-poleSwitching accuracy (repetition accuracy) <± 1% of the set pressure


145


Electronics accessories | Electronics | GoTo Europe


Card holderVT 3002


Features ▶ Can be fixed with screws or on a top hat rail ▶ Can be mounted in a vertical position on the top hat rail

by means of an additional adapter (included in the scope of delivery)

▶ Stable substructure ▶ Card lock and ejection with lever actuation ▶ Connection via screw terminals

Product descriptionThe type VT 3002 card holder is used for the easy installation and wiring of individual electronic cards in the Europe format, e.g. in control cabinets.

Technical data Terminal voltage according to VDE 0110 C U VAC/VDC max. 48

Current carrying capacity Imax A VT 3002…32D 4VT 3002…48F 4

Ambient temperature range ϑ °C -20 … +70Protection class IP20Electrical connection VT 3002…32D 32-pole female multipoint connector, design D, DIN 41612

VT 3002…48F 48-pole female multipoint connector, design F, DIN 41612Pin assignment VT 3002…32D even, lines a/c

VT 3002…48F even, lines d/b/z


146


GoTo Europe | Electronics | Mobile electronics

BODAS control unitsRC series 30

▶ Total number of inputs: up to 75 ▶ PWM outputs: up to 28 ▶ Digital outputs: up to 14 ▶ Analog outputs: up to 5 ▶ CAN bus interfaces: up to 4

More detailed information:Data sheet “RC4-5” 95205Data sheet “RC12-10”, “RC20-10”, “RC18-14” 95204

Features ▶ Programmable in C and BODAS design ▶ Diagnosis with BODAS service ▶ Nominal voltage 12 V/24 V ▶ Protection class IP65/IP66 (RC4-5) ▶ Frequency inputs: active, inductive, Rexroth DSM ▶ 4 temperature/resistance inputs

Product descriptionThe control units are the core units of the BODAS system They form a modular and scalable solution with multi-functional inputs and outputs for the ideal control of the electric hydraulics components in the machine. With their broadly spread application spectrum, BODAS control units map the requirements of mobile machines in an ideal manner.In complex applications, several control units can be switched together in a network. Safety features, which are integrated in the standard version, allow a simple and reliable machine diagnosis.

Technical dataBODAS control units RC4-5/30 RC12-10/30 RC20-10/30 RC28-14/30

Total number of inputs 30 75 75 75

PWM outputs 4 12 20 28

Digital outputs 5 10 10 14

Analog outputs 1 5 5 5

CAN bus interfaces 2 4 4 4



147


Mobile electronics | Electronics | GoTo Europe

More detailed information:Data sheet “DSM” 95132, ”PR3” 95155, “TSF” 95180, "TSA” 95181

BODAS sensors

▶ DSM speed sensor ▶ PR3 pressure sensor ▶ Temperature sensor for fluids, TSF ▶ Temperature sensor for air, TSA

Features ▶ Specifically adapted to the BODAS control units and

Rexroth mobile hydraulics ▶ High temperature range ▶ Short-circuit protection and reverse polarity

protection (partially) ▶ High electro-magnetic compatibility (EMC) ▶ High IP protection classes for mobile use

Product descriptionAs component of the BODAS system, the sensors provide the control unit with important information regarding the machine and the environment. Sensors for mobile machines must be able to resist extremely high environmental loads, in particular when being mounted in the area of the hydraulic power units and drive motors.The sensors for various measurements are based on robust, fault-free, mostly contactless measuring principles. In their housing, the sensor elements are safely protected against vibration, shock, and hazardous fluids and are equipped with a cable connection or connectors suitable for mobile applications.

Technical dataBODAS sensors DSM PR3 TSF TSA

Measurement Speed Pressure Temperature (fluids) Temperature (air)

Measurement range 1 … 5000 Hz 0 … 25 to 0 … 600 bar -40 … 150 °C -30 … 130 °C

Supply voltage 4.5…20 V 5 V / 8…36 V – –Protection class IP69k IP67 / IP69K IP65 IP64





148


GoTo Europe | Electronics | Mobile electronics

BODAS service

▶ PC software for service and commissioning ▶ Creation of parameters on BODAS control units without

specific knowledge in programming ▶ Access to error storage and diagnosis information ▶ Integrated data logger for the representation of the

measurements’ development over time ▶ Simple optimization of machine parameters

Features ▶ Programming/flashing of control units ▶ Password protection for avoiding unauthorized

parameter changes ▶ Graphical PC interface ▶ Easy operation ▶ Command line interface ▶ Compatible with CAN adapters by Vector and Peak

Product descriptionThe PC software tool BODAS service is used for the design of comfortable service functions for BODAS control units by Rexroth. Parameters can be displayed and edited. Process variables can be indicated, while their development can be represented graphically and recorded. Additionally, error storages can be read and reset and an application diagnosis can be configured. Additionally, there are functions for reading and describing the EEPROM control units.



149


Mobile electronics | Electronics | GoTo Europe


Analog amplifierRA2-1

▶ For the control of simple functions of electro-hydraulic components

▶ Two power outputs (PWM) and one switching output ▶ Separately adjustable time for each output, for upwards

and downwards ramps ▶ Adjustable minimum and maximum flows for each

output

Features ▶ Optional: mutual locking of the proportional solenoid

control ▶ Externally adjustable PWM frequency ▶ Voltage supply for external command value

potentiometer ▶ Monitoring of the command value potentiometer for

cable break and short-circuit ▶ Error output ▶ Overload protection, overvoltage protection, conditional

short-circuit protection

Product descriptionThe analog amplifier is used for the control of up to two proportional solenoids. As input variable, the prescribed control voltage is processed in the amplifier. As output parameter, the analog amplifier provides a regulated electrical current for the control of the proportional solenoids.The amplifier outputs for the proportional solenoids are activated by applying approx. 5% of the maximum command value voltage at the input, i.e. the minimum output current is applied.

Technical dataAnalog amplifier RA2-1

Nominal voltage 12 and 24 V

Maximum current consumption with load 6 A

Switching input 1

PWM outputs 2

Switching output 1

LED indicators Red Error (error display)

Green Power (operating display)

Yellow I1 (PWM current channel 1)

Yellow I2 (PWM current channel 2)


150


GoTo Europe

Systems

151


Systems | GoTo Europe

Hydraulic solutions with energy-saving control systemThe Rexroth-SYDFE is an electro-hydraulic control system based on an axial piston variable displacement pump for controlling pressure, flow and power without throttling losses in the energy line. The advantages are robustness, high efficiency, energy efficiency as well as a dynamic and highly accurate regulation.

152


GoTo Europe | Systems | Electro-hydraulic control systems


Pressure and flow control systemSYDFE1-3X, SYDFEE-3X, SYDFEC-3X, SYDFEn-3X, SYDFED-3X

▶ Component series 3X ▶ Maximum operating pressure 280 bar ▶ Size 71 … 180

FeaturesThe control system consists of these components:

▶ Axial piston variable displacement pump A10VSO... (series 32) ▶ Proportional directional valve, type VT-DFP.-2X or

VT-DFPD-1X as pilot control valve, including inductive position transducer for the valve position sensing:

– Types SYDFEE, SYDFEC, SYDFEn and SYDFED: with on-board electronics (OBE)

– Type SYDFE1: external control electronics VT 5041-3X ▶ Position transducer for sensing the swivel angle ▶ Optional:

– Pressure transducer HM20 – SYDZ preload valve with integrated pressure relief

function

Product descriptionThe pressure and flow control system of the SYDFE.-3X type is used for the electro-hydraulic control of swivel angles, pressure and power (optional) of an axial piston variable displacement pump.

Technical data Type SYDFE1-3X SYDFEE-3X SYDFEC-3X and

SYDFEn-3XSYDFED...3X

Operating voltage UB VDC 24 24 24 24Command value inputs U V More detailed information:

VT 5041, data sheet 30242± 10; 0 ... 10 0 ... 10 0 ... 10

I mA 4 ... 20 0 ... 20 0 ... 20Ambient temperature range ϑ °C Valve -20 ... +60 0 … 60 0 ... 50 0 ... 50Protection class IP 65 with mounted and locked plug-in connectorsElectrical connection Valve connector Multi-pole plug-in connector


153


Electro-hydraulic control systems | Electronics | GoTo Europe


External control electronics for the SYDFE1 control of the A10VSO axial piston variable displacement pumpVT 5041

▶ Component series 3X ▶ Analog, euro-card format ▶ Part of the SYDFE1 pressure and flow control system

(component series 2X and 3X)

Features ▶ Differential amplifier inputs ▶ Controller for valve spool position ▶ Minimum value generator for pressure and swivel angle

controller ▶ Self-timing output stage ▶ Pressure-dependent leakage compensation (can be

switched off) ▶ Reverse polarity protection for voltage supply ▶ Switchable actual pressure value input

(current, voltage, range) ▶ 6 LED indicators on the front plate for the operating

state

Product descriptionThe control electronics of type VT 5041 is used for realizing the electronic functions of the SYDFE1 adjustment device in the A10VSO axial piston variable displacement pump.

Technical data Operating voltage UB VDC 24 Analog command value inputs U V 0 … 10Solenoid current Imax A 2,5; R20 = Ω Ambient temperature range ϑ °C 0 … +50Protection class IP20Electrical connection 32 pin male multipoint connector; DIN 41612; design D


154


GoTo Europe

Power units

155


Power units | GoTo Europe

Power units are the heart of all hydraulic systems and have a major effect on their productivity and efficiency.Our power units are used in space as well as in deep sea applications. They supply injection molding machines and steel works with force and move the most famous stages in the world.Thanks to their superior energy efficiency, Rexroth power units ensure low operating costs and a minimum CO2 footprint. Simultaneously, we systematically reduce the noise emissions and ensure that your system meets all safety standards. For this purpose, we take advantage of the largest modular hydraulics system worldwide by using mostly mass produced standard components.

From just-in-time delivery of series power units to the turnkey handling of project-specific systems: Rexroth is your system partner for complete hydraulic power units over their entire life cycle.

156

Motor-pump groupABAPG and ABHPG

▶ With variable axial piston pump, type A10VSO – Series 52: Size 10 – Series 31: Sizes 18 ... 140

▶ Electric motor frame size 100L ... 315S

Features ▶ Electric motor design IM B5 or IM B3/B5 ▶ Pump fastened at the electric motor with rigid pump

carrier and coupling ▶ Versatile possible applications on tank, base frame or

separate installation ▶ Maintenance-friendly set-up and low operating noise ▶ Adjustment DFR1 (pressure/flow controller) and DFLR

(pressure/flow power controller)

Product descriptionMotor-pump groups turn electrical energy into hydraulic energy. They have been designed for hydrostatic drives in open circuits.Type A10VSO axial piston pumps of the 31 and 52 series are suited for versatile use within the pressure range of 50 to 315 bar.The motor-pump groups are designed according to efficiency class IE3 in accordance with the directive (EC) no. 640/2009 of the Commission dated 22 July 2009 on the implementation of the directive 2005/32/EC of the European Parliament.

Technical data Displacement Vg max cm3 10 ... 140Maximum operating pressure pmax bar 315Electric motor power P kW 3 ... 110


GoTo Europe | Power units | Motor-pump groups

More detailed information:Data sheet 51180, www.boschrexroth.com/ics/abapg

157

Motor-pump groupABAPG and ABHPG

▶ With adjustable type PV7 vane pump ▶ Electric motor frame size 90S ... 250M ▶ Maximum pressure 160 bar ▶ Maximum flow 162.5 l/min

Features ▶ Electric motor design IM B5 or IM B3/B5 ▶ Pump fastened at the electric motor with rigid pump

carrier and coupling ▶ Versatile possible applications on tank, base frame or

separate installation ▶ Maintenance-friendly set-up and low operating noise

Product descriptionMotor-pump groups turn electrical energy into hydraulic energy. They have been designed for hydrostatic drives in open circuits.The use of a type PV7 vane pump allows for versatile applications within a pressure range of 40 to 160 bar.The motor-pump groups are designed according to efficiency class IE3 in accordance with the directive (EC) no. 640/2009 of the Commission dated 22 July 2009 on the implementation of the directive 2005/32/EC of the European Parliament.

Technical data Displacement Vg max cm3 10 ... 118Maximum operating pressure pmax bar 160Electric motor power P kW 1.1 ... 55.0


Motor-pump groups | Power units | GoTo Europe

More detailed information:Data sheet 51171, 51181, www.boschrexroth.com/ics/abapg

158


GoTo Europe

Accumulators

159


Accumulators | GoTo Europe

Where cyclical motions take place, hydraulic accumulators are able to reduce the installed power and thus increase energy efficiency.Our well-structured portfolio of bladder and diaphragm type accumulators meets the requirements of systems of all sizes and of all applications. Their convincing features are the long life cycles and sophisticated details. The exchangeable gas valves in bladder-type accumulators, for example, increase their maintenance- and repair-friendliness. Thanks to the extreme resistance of the bladders in Rexroth accumulators, the exchange intervals can be extended as well. Our hydraulic accumulators provide a crucial back-up for safe shut-downs in case of a power failure in plant construction and wind energy plant applications.

Accumulator shut-off modules: Ready-to-install function – a complete system ensures that your design complies with all standardsA hydraulic accumulator only meets all international regulations if it is used with an accumulator shut-off block. We offer you assemblies that have been constructed and optimized by leading hydraulics specialists allowing you to meet the Pressure Equipment Directive 2014/68/EU.We deliver our accumulator shut-off block with integrated isolator valve, pressure valve and drain valve, completely mounted on a console ready for immediate attachment.Our accumulator shut-off modules consist of tried and tested standard components: CE tested cartridge, shut-off cock and safety valve, measuring and accumulator ports. On request, our service team will connect the module to your system in your facilities.

160


GoTo Europe | Accumulators | Hydro-pneumatic accumulators

Diaphragm type accumulators HAD

▶ Nominal volume 0.075 ... 3.5 liters ▶ Component series 1X, 2X ▶ Maximum operating pressure 350 bar

Features ▶ Hydraulic accumulator according to Pressure Equipment

Directive 2014/68/EU ▶ Diaphragm material for different applications ▶ Use e.g. as energy storage in intermittent operation

systems, energy reserve for emergencies, compensation of leakage losses, shock and vibration absorption

Product descriptionDiaphragm type accumulators are used for energy storage, shock and vibration absorption, and leakage oil compensation or volume compensation in hydraulic systems. They consist of a pressure-resistant vessel (high-tensile steel). The interior of the vessel is split into a gas and a fluid side by an elastic diaphragm. When the operating pressure is increased, hydraulic fluid is flowing into the accumulator and compresses the gas until the gas pressure is identical to the fluid pressure. When the operating pressure is reduced, the gas expands again and feeds the hydraulic system with hydraulic fluid.


Technical data Nominal volume l 0.075 0.16 0.35 0.5 0.7 1

Effective gas volume l 0.075 0.16 0.32 0.48 0.75 1

Flow qV l/min 10 10 40 40 40 40

Operating pressure pmax bar 250 250 210 250 350 200

Nominal volume l 1.4 2 2.8 3.5

Effective gas volume l 1.4 1,95 2,7 3.5

Flow qV l/min 40 60 60 60

Operating pressure pmax bar 350 350 350 350


161


Hydro-pneumatic accumulators | Accumulators | GoTo Europe

Bladder-type accumulator HAB

▶ Nominal volume 1 ... 50 liters ▶ Component series 6X ▶ Maximum operating pressure 350 bar

Features ▶ Hydraulic accumulator according to Pressure Equipment

Directive 2014/68/EU ▶ Bladder material for different applications ▶ Use e.g. as energy storage in intermittent operation

systems, energy reserve for emergencies, compensation of leakage losses, shock and vibration absorption, volume compensation in the event of pressure and temperature changes

Product descriptionBladder-type accumulators are used for energy storage, shock and vibration absorption, and leakage oil compensation or volume compensation in hydraulic systems. They consist of a seamless pressure vessel (high-tensile steel). The interior of the vessel is split into a gas and a fluid side by an elastic bladder. When the operating pressure is increased, hydraulic fluid is flowing into the accumulator and compresses the gas in the bladder until the gas pressure is identical to the fluid pressure. When the operating pressure is reduced, the gas expands again and feeds the hydraulic system with hydraulic fluid.


Technical data Nominal volume l 1 2.5 4 6 10 20

Effective gas volume l 1 2.4 3.7 5.9 9.2 18.1

Flow qV l/min 240 450 450 450 900 900

Operating pressure pmax bar 330/350 330/350 330/350 330/350 330 330

Nominal volume l 24 32 50

Effective gas volume l 24.5 33.4 48.7

Flow qV l/min 900 900 900

Operating pressure pmax bar 330 330 330


162


GoTo Europe | Accumulators | Accumulator stations

Accumulator stationsABSBG

▶ Nominal volume 0.7 ... 50 liters ▶ Maximum operating pressure 330 bar

Features ▶ Accumulator station with bladder or diaphragm type

accumulator ▶ Safety block with integrated shut-off valve, safety valve

(type-examination tested) and drain valve ▶ Drain valve, optionally manually or electrically operated ▶ Glycerine-filled pressure gauge with relief pressure

marked in red ▶ Console for weld or screw connection ▶ Assembly prepared for external equipotential bonding

Product descriptionAccumulator stations are intended for use in hydraulic systems and consist of a diaphragm or bladder-type accumulator with shut-off block on mounting elements.These assemblies comply with the applicable national rules and regulations in Europe (Pressure Equipment Directive 2014/68/EU), China (Selo) or Russia (Gost).


Technical data Accumulator type Bladder-type accumulator Diaphragm type accumulators

Accumulator volume DN l 1 … 50 0.7 … 3.5

Response pressure of the safety valve pmax bar 100, 140, 210, 330 100, 140, 210, 330


Filters

163


Filters | GoTo Europe

Oil is the central component of every hydraulic system. If a system fails, this is mostly caused by oil contamination. Rexroth filters and cleaning systems for hydraulic oil and lubricating oil applications ensure ideal operating conditions throughout the entire life cycle.With a broad range of completely new and revised filter systems we have the right solution for all pressure ranges and applications for you. Our filter media reliably remove particles from all hydraulic fluids and thus protect your system against damage. In addition, our filters reliably remove free water from the medium and thus prevent corrosion. However, Rexroth offers more than just the standard: Specific process filters will meet the requirements of your individual applications as well.

We have prepared our modern filter systems for the current and future requirements of condition-dependent maintenance strategies. Sensors that have been integrated into our filter assemblies permanently measure contamination and indicate necessary filter changes well in advance (even applying several indication levels) – either visually at the filter or via a message on the operator's device of the control system. This reduces maintenance costs while at the same time ensuring optimum working conditions for your system.

164


GoTo Europe | Filters | Breathing filters

Breathing filtersTLF I..., TLF II... and TLF III...

Features ▶ Filtration of the suction air of industrial systems ▶ Prevention of initial damage of pumps, bearings and

system components


Technical data Maximum flow volume qV max l/min 80000Filter rating nominal μm 10 … 25

absolute μm 10

Product descriptionThe breathing filters are designed as demountable filter housing for breathing and bleeding with internal exchangeable filter element. They filter the suction air of industrial systems and thus prevent damage to the components.

▶ Sizes 1-25 … 8-250 ▶ Operating temperature -20 °C ... +100 °C ▶ Connection up to DN250


165


Tank mounted filters / return flow filters | Filter | GoTo Europe

Tank mounted return flow filters10TEN0040 ... 1000, 10TE2000 and 10TE2500

Features ▶ Special highly efficient filter materials ▶ Filtration of very fine particles and high dirt holding

capacity across a broad pressure differential range ▶ High collapse rating of the filter elements ▶ The standard version is equipped with a mechanical

optical maintenance indicator with memory function and a bypass valve integrated in the filter housing

▶ Available as optional equipment with different electrical switching elements, modular design

Product descriptionThe tank mounted return flow filters are designed for installation on fluid tanks of hydraulic or lubrication systems. Their function is to separate solid materials from fluids and they are also used as filling or bypass filters.


▶ Sizes according to DIN 24550: 0040 ... 1000, sizes according to Rexroth standard: 2000 and 2500

▶ Filter rating 3 … 100 μm ▶ Maximum filter area 4.8 m² ▶ Operating temperature -10 °C ... +100 °C ▶ Connection up to SAE 4‘‘ - 3000 psi

Technical data Size 0040 0063 0100 0160 0250 0400 0630 1000Maximum flow volume qV max l/min 1,680Filter rating nominal μm 10 … 100

absolute μm 3 … 20


166


GoTo Europe | Filters | Filter systems

Replacement cartridges80.; 81. and 82.

Features ▶ Filter media made of glass fiber material and filter paper ▶ Versatile connection threads, available in different types

and pressure ratings ▶ Attainable oil cleanliness up to ISO 13/10/8 (ISO 4406) ▶ Large filter area on small construction space ▶ If required with bypass valve ▶ Other versions available on request

Product descriptionThe replacement cartridge filters have been especially developed for use in mobile hydraulics. They are designed for the installation into the piping of a hydraulic or lubrication system or in the supply circuit and serve the protection of downstream components and systems.


▶ Sizes according to the Rexroth standard: 30 … 130 Filter rating: 1 … 20 μm

▶ Filter area: 3820 cm² (592 in2)

Technical data Maximum flow volume qV max l/min 150Filter rating nominal μm Filter paper, non-reusable (not cleanable) P10 P25 10 ... 25

absolute μm Glass fiber material, non-reusable (not cleanable) H3XL, H6XL, H10XL, H20XL

3 ... 20


167


Filter systems | Filters | GoTo Europe

Filter cooler unit with inline filter according to DIN 24550ABUKG

Features ▶ Compact unit with pump, installed low-pressure inline

filter and plate heat exchanger ▶ Modular set-up ▶ Set-up with console or on installation plate, depending

on the individual requirements ▶ Low-noise version available (external gear pump or

screw spindle pump)

Product descriptionFilter cooler units have been designed for filtering and cooling hydraulic fluids in the bypass circuit. This has the advantage that the fluid flow passing through the filter element is always a low-pulsation flow, regardless of the system's working cycle. This slows down the process of aging and increases the life cycle of the hydraulic fluid. Treatment of the hydraulic fluid can be performed almost noiselessly using the new ABUKG-4X series with external gear pump or screw spindle pump.


▶ Component series 4X ▶ With gerotor pump, external gear pump or screw spindle

pump ▶ With electric motor frame size 90S ... 132S ▶ With low-pressure inline filter (filter rating 10 μm)

according to DIN 24550 ▶ With plate heat exchanger

Technical data Thermal output to be dissipated P kW 4 ... 75Displacement q l/min 17 ... 186


168 GoTo Europe | Filters | Filter elements

Filter elements1. and 2.

Features ▶ Filter media for numerous application ranges, including

micro glass, filter paper, wire mesh, fleece material and metal fibre fleece.

▶ Attainable oil cleanliness up to ISO 12/8/3 (ISO 4406) ▶ High dirt holding capacity through multi-layer glass fiber

technology ▶ Low initial pressure differential (ISO 3968) ▶ Product and user support by fluid and filter analysis

(residue analysis)

Product descriptionThe filter element is the central component of industrial filters. The actual filtration process takes part in the filter element. The main filter variables, such as retention capacity, dirt holding capacity and pressure loss are determined by the filter elements and the filter media used in them. The use of zinc-free filter elements prevents early "element blocking", thus considerably increasing the life cycle of an element.


▶ Sizes 0040 … 1000 (according to DIN 24550) Sizes 0003 … 0270

▶ Maximum collapse pressure rating 330 bar ▶ Filter rating 1 ... 1500 μm ▶ Maximum filter area 4.8 m² ▶ Maximum filtration ratio βX(C) ≥ 1000

Technical data Size 0040 0063 0100 0160 0250 0400 0630 1000Maximum pressure differential Δpmax bar 330 330 330 330 330 330 330 330Maximum flow volume qV max l/min 450 450 450 450 450 450 450 450Filter rating nominal μm 10, 25, 40, 100 (stainless steel wire mesh, cleanable)

absolute μm H3XL, H6XL, H10XL, H20XL (micro glass, not cleanable)



169


Filter elements | Filters | GoTo Europe

Filter elements9. and 10.

Features ▶ Filter media for numerous application ranges made of

micro glass, filter paper, wire mesh and fleece material ▶ Attainable oil cleanliness up to ISO 12/8/3 (ISO 4406) ▶ High dirt holding capacity through multi-layer glass fiber

technology ▶ Low initial pressure differential (ISO 3968) ▶ Product and user support by fluid and filter analysis

(residue analysis)

Product descriptionThe filter element is the central component of industrial filters. The actual filtration process takes part in the filter element. The main filter variables, such as retention capacity, dirt holding capacity and pressure loss are determined by the filter elements and the filter media used in them. The use of zinc-free filter elements prevents early "element blocking", thus considerably increasing the life cycle of an element.


▶ Size 0030 … 2600 (according to DIN 24550) ▶ Maximum collapse pressure rating 210 bar ▶ Filter rating 3 ... 20 μm, non-woven glass fiber media ▶ Maximum filter area 3.35 m² ▶ Maximum filtration ratio βX(C) ≥ 1000

Technical data Maximum pressure differential Δpmax bar 210Maximum flow volume qV max l/min 2000Filter rating nominal μm 10, 25, 40, 100 (stainless steel wire mesh, cleanable)

absolute μm H3XL, H6XL, H10XL, H20XL (micro glass, not cleanable)


170


GoTo Europe | Filters | Filter elements

Filter elements16.

Features ▶ Filter media for a number of application ranges made of

non-woven glass fiber media, filter paper and wire mesh ▶ Attainable oil cleanliness up to ISO 10/6/4 (ISO 4406) ▶ High dirt holding capacity and filtration performance

due to multi-layer glass fiber technology ▶ Low initial pressure differential (ISO 3968) ▶ Product and user support by fluid and filter analysis

(residue analysis)

Product descriptionThe filter element is the central component of industrial filters. The actual filtration process takes part in the filter element. The main filter variables, such as retention capacity, dirt holding capacity and pressure loss are determined by the filter elements and the filter media used in them.


▶ Size 6200 … 9801 ▶ Maximum collapse pressure rating 210 bar ▶ Filter rating 1 ... 20 μm ▶ Maximum filtration ratio βX(C) ≥ 200 (ISO 16889)

Technical data Maximum pressure differential Δpmax bar 210Filter rating nominal μm 10, 25, 40, 60, 100 (stainless steel wire mesh, cleanable)

absolute μm H1XL, H3XL, H6XL, H10XL, H20XL (non-woven glass fiber media, not cleanable)


171 Filter elements | Filters | GoTo Europe


Filter elements18.

Features ▶ Filter media for a number of application ranges made of

non-woven glass fiber media, filter paper and wire mesh ▶ Attainable oil cleanliness up to ISO 10/6/4 (ISO 4406) ▶ High dirt holding capacity through multi-layer glass fiber

technology ▶ Low initial pressure differential (ISO 3968) ▶ Filter elements with high pressure differential stability

Product descriptionThe filter element is the central component of industrial filters. The actual filtration process takes part in the filter element. The main filter variables, such as retention capacity, dirt holding capacity and pressure loss are determined by the filter elements and the filter media used in them.


▶ Size 5 … 500 ▶ Maximum collapse pressure rating 210 bar ▶ Filter rating 3 ... 20 μm, non-woven glass fiber media ▶ Maximum filtration ratio βX(C) ≥ 200

Technical data Maximum pressure differential Δpmax bar 210Filter rating nominal μm 10, 25, 40, 60, 100 (stainless steel wire mesh, cleanable)

absolute μm H3XL, H6XL, H10XL, H20XL (non-woven glass fiber media, not cleanable)


172


GoTo Europe | Filters | Filter elements

Filter elements for micro filtration

Features ▶ Module set-up consisting of 16 interchangeable cells ▶ Support tube in one-part design ▶ Metal-free version ▶ Filter material made of pressed cellulose fibers ▶ Auxiliary filter material for supporting the filtration

process ▶ Support structure made of polypropylene ▶ Filter cells with spacer for avoiding a block build-up ▶ High dirt holding capacity thanks to deep filtration

Product descriptionCELLUDISC filter elements are used for the micro filtration of hydraulic and lubricating oil, preferably as bypass filter.


▶ Size 10” ▶ Maximum pressure differential 5 bar (73 psi) ▶ Filter rating 2 and 10 μm ▶ Operating temperature +10 °C … +80 °C (+50 °F … +176 °F)

Technical data Maximum pressure differential Δpmax bar 5Filter rating nominal μm 2

absolute μm 4


173



Filter elements | Filters | GoTo Europe

Filter elements for the installation into old EPE filter housings1.; 2. and 3. filter elements

▶ Features ▶ Filter media made of glass fiber material (optionally

water-absorbing) ▶ Filter paper, wire mesh, fleece material and metal fibre

fleece for numerous fields of application ▶ Cleanable wire mesh filter media ▶ Attainable oil cleanliness up to ISO 10/6/4 (ISO 4406) ▶ High dirt holding capacity and filtration performance due

to multi-layer glass fiber technology at a simultaneously low initial pressure differential (ISO 3968)

▶ Extended product range for non-mineral oil based fluids ▶ Filter elements with high pressure differential stability

Product descriptionThe filter element is the central component of industrial filters. The actual filtration process takes part in the filter element. The main filter variables, such as retention capacity, dirt holding capacity and pressure loss, are determined by the filter elements and the filter media used in them.

▶ Sizes according to Rexroth standard: ▶ 1.0004 … 1.0270C; 1.10 … 1801 ▶ 2.0003 … 2.0145; 2.10 … 2.900; 2.Z30 … 2.Z180 ▶ 3.0003 ▶ Pressure differential resistance up to 330 bar ▶ Filter rating 1 … 800 μm ▶ Filter area up to 4.68 m² ▶ Operating temperature –10 °C … +100 °C

Technical data Maximum pressure differential Δpmax bar 330Filter rating nominal μm 10 ... 800 (protective mesh made of stainless steel, cleanable)

20, 25 (filter paper, non-cleanable)25, 40, 60 (fleece material, non-cleanable)

absolute μm 5, 10 (metal fibre fleece, non-cleanable)3 ... 20 (water-absorbing filter material, non-cleanable)

1 ... 20 (non-woven glass fiber media, non-cleanable)


174


GoTo Europe | Filters | Filter accessories

Maintenance indicator for filtersWE and WO

Features ▶ Modular set-up ▶ Mechanical-optical indicators WO with one switching

point and memory function ▶ Electronic switching elements WE with one or two

switching points ▶ Possible signal suppression during cold start

Product descriptionMaintenance indicators serve the monitoring of filters by indicating the exceedance of a pressure differential and/or a back pressure in the filter.By default, the Rexroth filters are supplied with a mechanical optical maintenance indicator. The electronic switching element is available as accessory and compatible with any mechanical optical maintenance indicator.


▶ Nominal pressure: 10, 160 and 450 bar ▶ Operating temperature WO -30 °C … +100 °C

Operating temperature WE -30 °C … +85 °C

Technical data Maximum operating pressure p max bar 450


Order details

175


Order details | GoTo Europe

The following pages list all available GoTo products with their description and material number. In addition, the table provides the maximum order quantity and the delivery time.

GoTo axial piston adjustment devices are supplied with customer-neutral pressure adjustments. If they do not meet the customer requirements, the settings can be adjusted in a customer-specific form at authorized Rexroth subsidiaries or Rexroth dealers. In a service case, the units will then, in the plant, be reset to the original GoTo settings; so another pressure adjustment before installation might become necessary.

GoTo Europe | Order details176


Page Material number Description(Type code / SAP description)

Maximum GoTo quantity (units)

Delivery time (working days)

ex works

Data sheet

1) Painting – 2) Setting

PumpsAxial piston pumps10 R902230046 A2FO10/61R-VAB06 – 1) RAL9005 1 10 91401

R902230048 A2FO12/61R-VAB06 – 1) RAL9005 1 10R902230050 A2FO16/61R-VAB06 – 1) RAL9005 1 10R902230054 A2FO28/61R-VPB05 – 1) RAL9005 3 10R902230055 A2FO28/61R-VAB05 – 1) RAL9005 1 10R902230056 A2FO32/61R-VAB05 – 1) RAL9005 1 10R902230057 A2FO32/61R-VBB05 – 1) RAL9005 3 10R902230058 A2FO45/61R-VPB05 – 1) RAL9005 3 10R902230059 A2FO56/61R-PPB05 – 1) RAL9005 3 10R902230060 A2FO56/61R-VAB05 – 1) RAL9005 1 10R902230061 A2FO63/61R-VBB05 – 1) RAL9005 3 10R902230062 A2FO63/61R-VAB05 – 1) RAL9005 1 10R902230063 A2FO80/61R-VPB05 – 1) RAL9005 3 10R902230064 A2FO80/61R-VAB05 – 1) RAL9005 1 10R902230065 A2FO90/61R-VBB05 – 1) RAL9005 3 10R902230047 A2FO107/61R-PPB05 – 1) RAL9005 3 10R902230049 A2FO125/61R-VBB05 – 1) RAL9005 3 10R902230051 A2FO160/61R-VPB05 – 1) RAL9005 3 10R902230052 A2FO180/61R-VBB05 – 1) RAL9005 3 10R902230053 A2FO200/63R-VBB05 – 1) RAL9005 3 10

11 R902230072 A17FO023/10NLWK0E81-0 – 1) none 3 10 91520R902230073 A17FO032/10NLWK0E81-0 – 1) none 3 10R902230074 A17FO045/10NLWK0E81-0 – 1) none 3 10R902230075 A17FO063/10NLWK0E81-0 – 1) none 3 10R902230076 A17FO080/10NLWK0E81-0 – 1) none 3 10R902230071 A17FO107/10NLWK0E81-0 – 1) none 3 10

12 R902230070 A17FNO125/10NLWK0E81-0 – 1) none 3 10 9151013 R902553983 A10FZO010/10R-VSC02N00 – 1) none 3 10 91485

R902553984 A10FZO018/10R-VRC02N00 – 1) none 3 10R902553985 A10FZO028/10R-VRC02N00 – 1) none 3 10R902553986 A10FZO045/10R-VRC02N00 – 1) none 3 10R902553987 A10FZG010/10W-VSC02N00 – 1) none 3 10R902553988 A10FZG018 /10W-VRC02N00 – 1) none 3 10

14 R902553975 A10VZO010EZ400/10R-VSC14N00H – 1) none / 2) Vgmax=10ccm, Vgmin=2ccm

3 10 91485

R902553976 A10VZO018EZ400/10R-VRC12N00H – 1) none / 2) Vgmax=18ccm, Vgmin=3,6ccm

3 10

R902553977 A10VZO028EZ400/10R-VRC12N00H – 1) none / 2) Vgmax=28ccm, Vgmin=5,6ccm

3 10

R902553978 A10VZO045EZ400/10R-VRD12N00H – 1) none / 2) Vgmax=45ccm, Vgmin=9ccm

3 10

R902553979 A10VZO010DR000/10R-VSC14N00H – 1) none / 2) DR=250bar, Vgmax=10ccm, Vgmin=0ccm

3 10

R902553980 A10VZO018DR000/10R-VRC12N00H – 1) none / 2) DR=250bar, Vgmax=18cm, Vgmin=0ccm

3 10

R902553981 A10VZO028DR000/10R-VRC12N00H – 1) none / 2) DR=250bar, Vgmax=28ccm, Vgmin=0ccm

3 10

Order details | GoTo Europe 177





ex works

Data sheet


14 R902553982 A10VZO045DR000/10R-VRD12N00H – 1) none / 2) DR=250bar, Vgmax=45ccm, Vgmin=0ccm

3 10 91485

R902553989 A10VZG010EZ400/10W-VSC07N00H – 1) none / 2)Vgmax=10ccm, Vgmin=2ccm

3 10

R902553990 A10VZG018EZ400/10W-VRC02N00 – 1) none / 2)Vgmax=18ccm, Vgmin=3.6ccm

3 10

15 R902543454 A15VSO110DRA0V/10MRVD4A11EU0000-0 – 1) none / 2) DR=350 bar

1 10 92800

R902543455 A15VSO110LRDRE2AHV/10MRVD4A11EU0000-0 – 1) none / 2) DR=350bar, LR=30kW (1500 rpm)

1 10

R902543452 A15VSO145DRA0V/10MRVD4A21EU0000-0 – 1) none / 2) DR=350 bar

1 10

R902543453 A15VSO145LRDRE2AHV/10MRVD4A21EU0000-0 – 1) none / 2) DR=350bar, LR=30kW (1500 rpm)

1 10

R902532550 A15VSO175LRDRE2AHV/10MRVE4A21EU0000-0 – 1) none / 2) DR=350bar, LR=30kW (1500 rpm)

1 10

R902543451 A15VSO175DRA0V/10MRVE4A21EU0000-0 – 1) none / 2) DR=350 bar

1 10

R902532548 A15VSO210DRA0V/10MRVE4A2EU0000-0 – 1) none / 2) DR=350bar, LS=14bar

1 10


1 10

R902532545 A15VSO280DRS0A0V/10MRVE4A41EU0000-0 – 1) none / 2) DR=350bar, LS=14bar

1 10

R902532546 A15VSO280LRDRA0V/10MRVE4A41EU0000-0 – 1) none / 2) DR=350bar, LR=45kW (1500 rpm)

1 10


1 10

R902543450 A15VLO280LRDRE2AHV/10MRVE4A41SU0000-0 – 1) none / 2) DR=350 bar, LR=45kW (1500 rpm)

1 10

16 R902532451 A10VSO 18 DR /31R-VPA12N00 – 1) none / 2) DR=280bar

3 10 92711

R902532452 A10VSO 18 DR /31R-VSA12N00 – 1) none / 2) DR=280bar

3 10

R902532453 A10VSO 18 DFR1/31R-VPA12K01 – 1) none / 2) DR=280bar, LS=14bar

3 10

R902532454 A10VSO 18 DFR1/31R-VSA12N00 – 1) none / 2) DR=280bar, LS=14bar

3 10

R902532455 A10VSO 28 DR /31R-VPA12N00 – 1) none / 2) DR=280bar

3 10

R902532456 A10VSO 28 DR /31R-VPA12K01 – 1) none / 2) DR=280bar

3 10

R902532457 A10VSO 28 DR /31R-VPA12K68 – 1) none / 2) DR=280bar

3 10


3 10

R902532459 A10VSO 28 DFR1/31R-VSA12N00 – 1) none / 2) DR=280bar, LS=14bar

3 10

R902532460 A10VSO 28 DFLR/31R-VPA12N00 – 1) none / 2) DR=280bar, LS=14bar, LR=7,5kW (1450 rpm)

3 10

R902532461 A10VSO 45 DR /31R-VPA12N00 – 1) none / 2) DR=280bar

3 10






ex works

Data sheet


16 R902532462 A10VSO 45 DR/31R-VPA12K01 – 1) none / 2) DR=280bar

3 10 92711

R902532463 A10VSO 45 DR/31R-VPA12K68 – 1) none / 2) DR=280bar

3 10


3 10


3 10

R902532466 A10VSO 45 DFLR/31R-VPA12N00 – 1) none / 2) DR=280bar, LS=14bar, LR=11kW (1450 rpm)

3 10

R902532471 A10VSO 71 DR/31R-VPA42N00 – 1) none / 2) DR=280bar

3 10


3 10


3 10


3 10


3 10

R902532477 A10VSO 71 DFLR/31R-VPA42N00 – 1) none / 2) DR=280bar, LS=14bar, LR=15kW (1450 rpm)

3 10

R902532660 A10VSO100 DR/31R-VPA12N00 – 1) none / 2) DR=280bar

3 10

R902532661 A10VSO100 DR/31R-VPA12K01 – 1) none / 2) DR=280bar

3 10

R902532662 A10VSO100 DR/31R-VPA12K68 – 1) none / 2) DR=280bar

3 10

R902532663 A10VSO100 DFR1/31R-VPA12K01 – 1) none / 2) DR=280bar, LS=14bar

3 10

R902532664 A10VSO100 DFR1/31R-VPA12K68 – 1) none / 2) DR=280bar, LS=14bar

3 10

R902532665 A10VSO100 DFLR/31R-VPA12N00 – 1) none / 2) DR=280bar, LS=14bar, LR=22kW (1450 rpm)

3 10

R902532668 A10VSO140 DR/31R-VPB12N00 – 1) none / 2) DR=280bar

3 10

R902532669 A10VSO140 DR/31R-VPB12K01 – 1) none / 2) DR=280bar

3 10

R902532670 A10VSO140 DR/31R-VPB12K68 – 1) none / 2) DR=280bar

3 10

R902532671 A10VSO140 DFR1/31R-VPB12K68 – 1) none / 2) DR=280bar, LS=14bar

3 10

R902532672 A10VSO140 DFLR/31R-VPB12N00 – 1) none / 2) DR=280bar, LS=14bar, LR=30kW (1450 rpm)

3 10

17 R902532467 A10VSO 45 DRS/32R-VSB32U00E – 1) none / 2) DR=280bar, LS=14bar

3 10 92714

R902532468 A10VSO 45 LA6DS/32R-VSB32U00E – 1) none / 2) DR=280bar, LS=14bar, LR=11kW (1500 rpm)

3 10


3 10


3 10






ex works

Data sheet


17 R902532478 A10VSO 71 DRS/32R-VSB32U00E – 1) none / 2) DR=280bar, LS=14bar

3 10 92714

R902532479 A10VSO 71LA6DS/32R-VSB32U00E – 1) none / 2) DR=280bar, LS=14bar, LR=15kW (1500 rpm)

3 10

R902532666 A10VSO100 DRS/32R-VSB32U00E – 1) none / 2) DR=280bar, LS=14bar

3 10

R902532667 A10VSO100LA6DS/32R-VSB32U00E – 1) none / 2) DR=280bar, LS=14bar, LR=22kW (1500 rpm)

3 10

R902532673 A10VSO140 DRS/32R-VSB32U00E – 1) none / 2) DR=280bar, LS=14bar

3 10


3 10


3 10

18 R902540902 A10VO28DFR1/52R-VSC12K01 – 1) none / 2) DR=250bar, LS=14bar

3 10 92703

R902540903 A10VO45DFR1/52R-VSC12K01 – 1) none / 2) DR=250bar, LS=14bar

3 10

19 R902552478 A1VO035DRS0C200/10BRVB2S51000000-0 – 1) none / 2) DR=250bar, LS=14bar

3 10 92650

R902552479 A1VO035DRS0C200/10BLVB2S51000000-0 – 1) none / 2) DR=250bar, LS=14bar

3 10

R902552480 A1VO035DRS0C200/10MRVB2S51000000-0 – 1) none / 2) DR=250bar, LS=14bar

3 10

R902552481 A1VO035DRS0C200/10MLVB2S51000000-0 – 1) none / 2) DR=250bar, LS=14bar

3 10

20 R902228074 A11VO40DRS/10L-NSC12N00 – 1) RAL9005 / 2) DR=350bar, LS=18bar

3 10 92500

R902228075 A11VO40DRS/10R-NSC12N00 – 1) RAL9005 / 2) DR=350bar, LS=18bar

3 10

R902228076 A11VO60DRS/10L-NSC12N00 – 1) RAL9005 / 2) DR=350bar, LS=18bar

3 10

R902228077 A11VO60DRS/10R-NSC12N00 – 1) RAL9005 / 2) DR=350bar, LS=18bar

3 10

R902228079 A11VO75DRS/10R-NSD12N00 – 1) RAL9005 / 2) DR=350bar, LS=18bar

3 10

R902228080 A11VO95DRS/10L-NSD12N00 – 1) RAL9005 / 2) DR=350bar, LS=18bar

3 10

R902228081 A11VO95DRS/10R-NSD12N00 – 1) RAL9005 / 2) DR=350bar, LS=18bar

3 10

21 R902230092 A7VO28DR/63R-NPB01 – 1) RAL9005 / 2) DR=350bar

3 10 92202

R902230093 A7VO55DR/63R-NPB01 – 1) RAL9005 / 2) DR=350bar

3 10

R902230094 A7VO55DR/63R-NZB01 – 1) RAL9005 / 2) DR=350bar

3 10


3 10






ex works

Data sheet

21 R902230087 A7VO107DR/63R-NPB01 – 1) RAL9005 / 2) DR=350bar

3 10 92202


3 10


3 10


3 10

R902230091 A7VO160EP2/63R-NPB01 – 1) RAL9005 / 2) DR=350bar

3 10

22 R902247052 A18VO055DRS00/11NRWK0E810-0 – 1) RAL9005 / 2) DR=350bar, LS=30bar

3 10 92270

R902247053 A18VO055DRS00/11NLWK0E810-0 – 1) RAL9005 / 2) DR=350bar, LS=30bar

3 10


3 10

R902230086 A18VO080DRS00/11NRWK0E810-0 – 1) RAL9005 / 2) DR=350bar, LS=30bar

3 10


3 10

R902230084 A18VO107DRS00/11NRWK0E810-0 – 1) RAL9005 / 2) DR=350bar, LS=30bar

3 10

23 R902244021 A4VG065EP1DP0000/40MRNC6S7FB2S5AS000 – 1) RAL9005, 2) DR=450bar

3 10 92004

R902244023 A4VG085EP1DP0000/40MRNC6V8FB2S5AS000 – 1) RAL9005, 2) DR=450bar

3 10

R902244025 A4VG110EP1DP0000/40MRND6V8FB2S5AS000 – 1) RAL9005, 2) DR=450bar

3 10

External gear pumps25 0510010008 AZPB-32-1.0RCP02MB 5 5 10088

0510020003 AZPB-32-1.0RHO01MB 5 50510110017 AZPB-32-2.0RCP02MB 5 50510120020 AZPB-32-2.0RHO01MB 5 50510110018 AZPB-32-2.5RCP02MB 5 50510120021 AZPB-32-2.5RHO01MB 5 50510112014 AZPB-32-3.1RCP02MB 5 50510120022 AZPB-32-3.1RHO01MB 5 50510114018 AZPB-32-4.0RCP02MB 5 50510120023 AZPB-32-4.0RHO01MB 5 50510114019 AZPB-32-4.5RCP02MB 5 50510120024 AZPB-32-4.5RHO01MB 5 50510114020 AZPB-32-5.0RCP02MB 5 50510120025 AZPB-32-5.0RHO01MB 5 50510122012 AZPB-32-6.3RCP02MB 5 50510120026 AZPB-32-6.3RHO01MB 5 50510122013 AZPB-32-7.1RCP02MB 5 50510120027 AZPB-32-7.1RHO01MB 5 5

11 0510215307 AZPF-12-004LNT20MB 5 5 100890510225006 AZPF-12-004RCB20KB 5 50510225013 AZPF-10-004RRR20MB 5 50510225022 AZPF-12-004RHO30PB 5 5







ex works

Data sheet

11 0510225023 AZPF-11-004RAB01MB 5 5 100890510225306 AZPF-10-004LCB20MB 5 50510315305 AZPF-12-005LNT20MB 5 50510315307 AZPF-10-005LCP20MB-S0007 5 50510325006 AZPF-10-005RCB20MB 5 50510325013 AZPF-11-005RRR20MB 5 50510325023 AZPF-11-005RRR20KB-S0023 5 50510325025 AZPF-12-005RHO30KB 5 50510325026 AZPF-11-005RAB1MB 5 50510325306 AZPF-10-005LCB20MB 5 50510415311 AZPF-10-008LCN20MB 5 50510415314 AZPF-12-008LNT20MB 5 50510415316 AZPF-11-008LCP20KB-S0007 5 50510425009 AZPF-10-008RCB20MB 5 50510425020 AZPF-10-008RRR20MB 5 50510425022 AZPF-12-008RCB20KB 5 50510425032 AZPF-11-008RHO30PB-S0285 5 50510425041 AZPF-11-008RRR20KB-S0023 5 50510425043 AZPF-12-008RHO30KB 5 50510425044 AZPF-11-008RAB1MB 5 50510425307 AZPF-10-008LCB20MB 5 50510425314 AZPF-12-008LRR20KB 5 50510515309 AZPF-12-011LCP20KB-S0007 5 50510515311 AZPF-12-011LNT20MB 5 50510515323 AZPF-11-011LCP20MB-S0007 5 50510515347 AZPF-10-011LFP20PB-S0003 5 50510525009 AZPF-10-011RCB20MB 5 50510525011 AZPF-10-011RHO30MB 5 50510525019 AZPF-12-011RRR20MB 5 50510525022 AZPF-12-011RCB20MB 5 50510525046 AZPF-10-011RHO30PB-S0285 5 50510525072 AZPF-11-011RRR20KB-S0023 5 50510525074 AZPF-12-011RHO30KB 5 50510525311 AZPF-10-011LCB20MB 5 50510525324 AZPF-11-011LRR20KB 5 50510525339 AZPF-11-011LHX30KB-S0135 5 50510525357 AZPF-10-011LHO30PB-S0285 5 50510515316 AZPF-11-014LCP20KB-S0007 5 50510515328 AZPF-10-014LCP20MB-S0288 5 50510515346 AZPF-12-014LFP20PB-S0003 5 50510515353 AZPF-10-014LHXXXMB-S0041 5 50510525018 AZPF-10-014RCB20MB 5 50510525020 AZPF-10-014RRR20MB 5 50510525073 AZPF-11-014RRR20KB-S0023 5 50510525342 AZPF-11-014LHX30KB-S0135 5 50510525348 AZPF-10-014LHO30PB-S0285 5 50510615315 AZPF-12-016LNT20MB 5 50510615317 AZPF-11-016LCP20KB-S0007 5 50510615326 AZPF-11-016LCP20MB-S0007 5 5






ex works

Data sheet

25 0510615333 AZPF-11-016LCP20KB-S0007 5 5 100890510615354 AZPF-10-016LFP20PB-S0003 5 50510625022 AZPF-10-016RCB20MB 5 50510625028 AZPF-12-016RRR20MB 5 50510625071 AZPF-11-016RRR20KB-S0023 5 50510625075 AZPF-12-016RHO30KB 5 50510625077 AZPF-11-016RAB01MB 5 50510625095 AZPF-11-016RRR20KB 5 50510625315 AZPF-10-016LCB20MB 5 50510625341 AZPF-10-016LHO30KB 5 50510625371 AZPF-12-016LFB20PB-S0019 5 50510615318 AZPF-10-019LCP20KB-S0007 5 50510615321 AZPF-12-019LNT20MB 5 50510615338 AZPF-11-019LCP20PB-S0007 5 50510615353 AZPF-10-019LFP20PB-S0003 5 50510625013 AZPF-10-019RCB20MB 5 50510625029 AZPF-12-019RRR20KB 5 50510625055 AZPF-11-019RCR20KB 5 50510625063 AZPF-10-019RHO30PB-S0285 5 50510625072 AZPF-11-019RRR20KB-S0023 5 50510625314 AZPF-10-019LCB20MB 5 50510625362 AZPF-10-019LHO30PB-S0285 5 50510715008 AZPF-22-022RFP20PB 5 50510715306 AZPF-12-022LCP20KB-S0007 5 50510725030 AZPF-12-022RCB20KB 5 50510725045 AZPF-21-022RRR20MB 5 50510725077 AZPF-12-022RRR20KB 5 50510725102 AZPF-11-022RRR20KB-S0023 5 50510745015 AZPF-10-022RSG20PB-S0012 5 50510725085 AZPF-10-025RHO30PB-S0285 5 5

25 0510725094 AZPN-12-025RDC20KB 5 5 100910510725104 AZPN-11-025RDC07KB-S0081 5 50510725058 AZPN-12-028RDC20KB 5 5

27 0510725167 AZPG-22-032RCB20MB 5 5 100930510725169 AZPG-22-040RCB20MB 5 50510725194 AZPG-22-040RDC20KB 5 50510725170 AZPG-22-045RCB20MB 5 5

Internal gear pumps28 R900932132 PGF1-2X/1,7RA01VP1 2 10 10213

R900932133 PGF1-2X/2,2RA01VP1 2 10R900932134 PGF1-2X/2,8RA01VP1 2 10R900932135 PGF1-2X/3,2RA01VP1 2 10R900932136 PGF1-2X/4,1RA01VP1 2 10R900932137 PGF1-2X/5,0RA01VP1 2 10R900932272 PGF2-2X/006RA01VP2 2 10R900932265 PGF2-2X/006RE01VE4 2 10R900564037 PGF2-2X/008RA01VP2 2 10R900932266 PGF2-2X/008RE01VE4 2 10R900568523 PGF2-2X/011RA01VP2 2 10






ex works

Data sheet

28 R900932271 PGF2-2X/011RE01VE4 2 10 10213R900032712 PGF2-2X/013RA20VP2 2 10R900943181 PGF2-2X/013RE20VE4 2 10R900932275 PGF2-2X/016RA20VP2 2 10R900932193 PGF2-2X/016RE20VE4 2 10R900571401 PGF2-2X/019RA20VP2 2 10R900943182 PGF2-2X/019RE20VE4 2 10R900932126 PGF2-2X/022RE20VE4 2 10R900932088 PGF3-3X/025RE07VE4 2 10R900932112 PGF3-3X/032RE07VE4 2 10R900932111 PGF3-3X/040RE07VE4 2 10

29 R900968999 PGH2-2X/005RE07VU2 2 10 10223R900951301 PGH2-2X/006RE07VU2 2 10R900951302 PGH2-2X/008RE07VU2 2 10R900951303 PGH3-2X/011RE07VU2 2 10R900951304 PGH3-2X/013RE07VU2 2 10R900951305 PGH3-2X/016RE07VU2 2 10

30 R901147100 PGH4-3X/020RE11VU2 2 10 10227R901147101 PGH4-3X/025RE11VU2 2 10R901147102 PGH4-3X/032RE11VU2 2 10R901147103 PGH4-3X/040RE11VU2 2 10R901147104 PGH4-3X/050RE11VU2 2 10R901147115 PGH5-3X/063RE11VU2 2 10R901147116 PGH5-3X/080RE11VU2 2 10R901147117 PGH5-3X/100RE11VU2 2 10R901147118 PGH5-3X/125RE11VU2 2 10

Vane pumps31 R900506809 PV7-1X/100-118RE07MC0-16 2 10 10515

R900580381 PV7-1X/10-14RE01MC0-16 4 10R900504653 PV7-1X/10-14RE01MD0-16 2 10R900534143 PV7-1X/10-20RE01MC0-10 2 10R900580382 PV7-1X/16-20RE01MC0-16 4 10R900533582 PV7-1X/16-30RE01MC0-08 2 10R900580383 PV7-1X/25-30RE01MC0-16 2 10R900534508 PV7-1X/25-45RE01MC0-08 2 10R900580384 PV7-1X/40-45RE37MC0-16 2 10R900535588 PV7-1X/40-71RE37MC0-08 2 10R900506808 PV7-1X/63-71RE07MC0-16 2 10

32 R900563233 PV7-1X/06-10RA01MA0-10 2 10 10522R900919237 PV7-1X/06-14RA01MA0-07 2 10R900950953 PV7-2X/20-20RA01MA0-10 2 10R900950955 PV7-2X/20-25RA01MA0-10 2 10

Radial piston pumps33 R900485830 PR4-1X/0,40-700WA01M01 2 10 11260

R900345609 PR4-1X/0,63-700WA01M01 2 10R900490630 PR4-1X/1,00-450WA01M01 2 10R900331074 PR4-1X/1,60-250WA01M01 2 10R900485829 PR4-1X/2,00-175WA01M01 2 10






ex works

Data sheet

1) Painting

34 R901089484 PR4-3X/1,60-700RA01M01 2 10 11263R901089173 PR4-3X/10,00-500RA01M01 2 10R901088429 PR4-3X/2,00-700RA01M01 2 10R901088564 PR4-3X/3,15-500RA01M01 2 10R901088624 PR4-3X/4,00-700RA01M01 2 10R901088867 PR4-3X/6,30-500RA01M01 2 10

Gerotor pumps35 R901230020 PGZ4-1X/020RA07VE4 2 10 10545

R901230024 PGZ4-1X/032RA07VE4 2 10R901230028 PGZ4-1X/040RA07VE4 2 10R901230032 PGZ4-1X/050RA07VE4 2 10R901230036 PGZ4-1X/063RA07VE4 2 10R901230040 PGZ4-1X/080RA07VE4 2 10R901230052 PGZ5-1X/100RA07VE4 2 10R901230056 PGZ5-1X/140RA07VE4 2 10

MotorsAxial piston motors38 R902230000 A2F5/60W-B3 – 1) RAL9005 2 10 91001

R902230001 A2FM10/61W-VAB030 – 1) RAL9005 2 10R902230002 A2FM10/61W-VBB030 – 1) RAL9005 3 10R902230006 A2FM12/61W-VAB030 – 1) RAL9005 2 10R902230007 A2FM12/61W-VPB030 – 1) RAL9005 3 10R902230008 A2FM12/61W-VPB040 – 1) RAL9005 3 10R902230013 A2FM16/61W-VAB030 – 1) RAL9005 2 10R902230014 A2FM16/61W-VBB030 – 1) RAL9005 3 10R902230015 A2FM16/61W-VBB040 – 1) RAL9005 3 10R902230021 A2FM23/61W-VAB020 – 1) RAL9005 2 10R902230022 A2FM23/61W-VPB030 – 1) RAL9005 3 10R902230023 A2FM23/61W-VPB040 – 1) RAL9005 3 10R902230024 A2FM28/61W-VAB010 – 1) RAL9005 3 10R902230025 A2FM28/61W-VAB020 – 1) RAL9005 2 10R902253471 A2FM28/61W-VAB100 – 1) RAL9005 3 10R902230026 A2FM28/61W-VPB030 – 1) RAL9005 3 10R902230027 A2FM32/61W-VAB010 – 1) RAL9005 3 10R902230028 A2FM32/61W-VAB020 – 1) RAL9005 2 10R902253472 A2FM32/61W-VAB100 – 1) RAL9005 3 10R902230029 A2FM32/61W-VBB030 – 1) RAL9005 3 10R902230030 A2FM32/61W-VBB040 – 1) RAL9005 3 10R902253481 A2FM45/61W-VAB020 – 1) RAL9005 3 10R902253473 A2FM45/61W-VAB100 – 1) RAL9005 3 10R902230031 A2FM45/61W-VPB010 – 1) RAL9005 3 10R902230032 A2FM45/61W-VPB020 – 1) RAL9005 3 10R902230033 A2FM45/61W-VPB040 – 1) RAL9005 3 10R902230034 A2FM45/61W-VZB020 – 1) RAL9005 2 10R902230035 A2FM56/61W-VAB020 – 1) RAL9005 2 10R902253474 A2FM56/61W-VAB100 – 1) RAL9005 3 10R902230036 A2FM56/61W-VPB020 – 1) RAL9005 3 10R902230037 A2FM63/61W-VAB010 – 1) RAL9005 3 10






ex works

Data sheet

1) Painting

38 R902230038 A2FM63/61W-VAB020 – 1) RAL9005 2 10 91001R902253475 A2FM63/61W-VAB100 – 1) RAL9005 3 10R902230039 A2FM63/61W-VBB040 – 1) RAL9005 3 10R902230040 A2FM80/61W-VAB010 – 1) RAL9005 3 10R902230041 A2FM80/61W-VAB020 – 1) RAL9005 2 10R902230042 A2FM80/61W-VPB020 – 1) RAL9005 3 10R902230043 A2FM90/61W-VAB010 – 1) RAL9005 3 10R902230044 A2FM90/61W-VAB020 – 1) RAL9005 2 10R902253476 A2FM90/61W-VAB100 – 1) RAL9005 3 10R902230045 A2FM90/61W-VBB020 – 1) RAL9005 1 10R902230003 A2FM107/61W-VAB010 – 1) RAL9005 3 10R902230004 A2FM107/61W-VAB020 – 1) RAL9005 3 10R902253477 A2FM107/61W-VAB100 – 1) RAL9005 3 10R902230005 A2FM107/61W-VPB020 – 1) RAL9005 3 10R902230009 A2FM125/61W-VAB010 – 1) RAL9005 3 10R902230010 A2FM125/61W-VAB020 – 1) RAL9005 3 10R902253478 A2FM125/61W-VAB100 – 1) RAL9005 3 10R902230011 A2FM125/61W-VBB010 – 1) RAL9005 3 10R902230012 A2FM125/61W-VBB020– 1) RAL9005 3 10R902230016 A2FM160/61W-VAB010 – 1) RAL9005 3 10R902230017 A2FM160/61W-VAB020 – 1) RAL9005 3 10R902253479 A2FM160/61W-VAB100 – 1) RAL9005 3 10R902230018 A2FM180/61W-VAB010 – 1) RAL9005 3 10R902230019 A2FM180/61W-VAB020 – 1) RAL9005 3 10R902253480 A2FM180/61W-VAB100 – 1) RAL9005 3 10R902230020 A2FM200/63W-VAB010 – 1) RAL9005 3 10

39 R902242671 A6VM60EP100P000E/71MWV0M4S720U-0 – 1) RAL9005

4 10 91610

R902242673 A6VM85EP100P000E/71MWV0N4S920U-0 – 1) RAL9005

4 10

R902242675 A6VM115EP100P000E/71MWV0P4T120U-0 – 1) RAL9005

4 10

40 0511525611 AZMF-12-011UCB20PX-S0077 5 5 140260511545601 AZMF-10-011USA20ML 5 50511525612 AZMF-12-014UCB20PX-S0077 5 50511625617 AZMF-12-016UCB20PX-S0077 5 50511645601 AZMF-10-016USA20ML 5 50511625615 AZMF-22-019UCB20PX-S0077 5 50511645603 AZMF-10-019USA20ML 5 50511625611 AZMN-22-020-UCB20PX-S0077 5 50511725604 AZMN-22-025UCB20PX-S0077 5 50511725605 AZMN-22-022UCB20PX-S0077 5 50511725607 AZMN-22-028UCB20PX-S0077 5 50511725613 AZMN-22-032UCB20PX-S0077 5 5






ex works

Data sheet

Mobile control unitsPilot control units 44 R907222461 1-2 TH6 L 06-10/M 01 3 10 64552

R907225176 1-2 TH6 L 06-10/M 05 3 10R907280651 1-2 TH6 L 70-10/M 01 3 10R908352025 1-2 TH6 L 97-10/M 05 3 10R907222891 1-2 TH6 M 06-10/M 01 3 10R907223721 2 TH6 M 06-10/M 05 3 10R907223668 1-2 TH6 P 06-10/M 05 3 10R908352027 1-2 TH6 P 97-10/M 05 3 10R907223723 2 TH6 P 06-10/M 05 3 10R908351216 2 TH6 P 06-10/M 05 S418 3 10R908353005 1-2 TH6 T 97-10/M 05 3 10

45 R907538966 2 TH6 RC 70-10/M 01 3 10 64551R907228886 2 TH6 RC 06-10/M 01 3 10R907228906 2 TH6 RP 06-10/M 01 3 10

46 R907222257 1 TH7 Z 53-10/M 03 S 172 3 10 64558R907141454 1 TH7 Z 06-10/M 01 3 10R907508769 1 TH7 QL 06-10/M 01 3 10R907229117 1 TH7 QL 05-10/M 01 3 10R907142321 2TH7Q06-1X/M05 3 10

47 R907281644 4 TH6 E 06-14/TT 0 3 M 01 3 10 29881R907280697 4 TH6 E 06-14/VT 03 M01 3 10R907281258 4 TH6E 70-14/ST 2 3 M 01 3 10R907280384 4 TH6E 70-14/YU 2 3 M 01 3 10R907281280 4 TH6E 70-14/ST 4 3 M 01 3 10R907281285 4 TH6E 70-14/VT 4 3 M 01 3 10R907280264 4 TH6 E 70 -14/ YU 03 M 01 3 10R908352295 4 THE5 E-20/TT 03 3 10R908352334 4 THE5 E-20/ST 23 3 10R908352337 4 THE5 E-20/YU 03 5 3 10R908352293 4 THEC5 E-20/TT 03 3 10R908352124 4 THEC5 E-20/ST 43 5 3 10R908351667 4 THEC5 E-20/YU 23 5 3 10R908352443 4 THES5 E-20/TT 43 3 10R908352384 4 THES5 E-20/YU 43 5 3 10R908352423 4 THES5 E-20/YU 43 5 3 10R908352424 4 THES5 E-20/YU 23 5 3 10

48 R908352403 4EJC E-10/TT 03 5 B0C0R1 3 10 29896

Power brake valves49 R900960195 LT 05 MKA-3X/080/02M 5 10 6614350 R900907143 LT 07 MKA-2X/080/02M 5 10 66146

R900905251 LT 07 MKA-2X/100/02M 5 1051 R900427591 LT 06-A06-3X/150B40/02M 5 10 6619152 R900504364 LT 08 MMA-2X/025/02M 5 10 66148

R900413682 LT 08 MMA-2X/100/02M 5 10

CylindersMill type cylinders54 R900ZY1011 CDH1…A3X/… (see www.boschrexroth.com/ics) 5 15 17332






ex works

Data sheet

On/off valvesIsolator valves58 R901085992 Z1S 6 E05-4X/V 5 5 21534

R901086037 Z1S 6 F05-4X/V 5 5R901086051 Z1S 6 P05-4X/V 10 5R901086052 Z1S 6 P30-4X/V 5 5R901086058 Z1S 6 T05-4X/V 10 5R901086059 Z1S 6 T30-4X/V 5 5R901086070 Z1S 6 A05-4X/V 5 5R901086077 Z1S 6 B05-4X/V 5 5R901086081 Z1S 6 C05-4X/V 5 5R901086090 Z1S 6 D05-4X/V 10 5

59 R901274759 Z1S 10 P05-1-4X/F 5 5 21537R901274760 Z1S 10 TA05-2TB9-4X/F 5 5R901274762 Z1S 10 A05-2-4X/F 5 5R901274766 Z1S 10 B05-2-4X/F 5 5

60 R900358268 S 8 A5.0/ 5 5 20375R900375858 S 6 A5.0/ 5 5R900420502 S 30 A2.0/ 5 5R900420504 S 30 A3.0/ 5 5R900420511 S 25 A1.0/ 5 5R900420519 S 30 A1.0/ 5 5R900420520 S 15 A2.0/ 5 5R900420521 S 15 A3.0/ 5 5R900420525 S 20 A1.0/ 5 5R900420528 S 20 A2.0/ 5 5R900420529 S 20 A3.0/ 5 5R900420531 S 10 A1.0/ 5 5R900420532 S 10 A2.0/ 5 5R900420537 S 15 A1.0/ 5 5R900422881 S 6 A1.0/ 5 5R900422886 S 8 A1.0/ 5 5R900446369 S 20 A5.0/ 5 5R900446476 S 10 A5.0/ 5 5R900446477 S 15 A5.0/ 5 5R900446709 S 30 A5.0/ 5 5R900451778 S 25 A5.0/ 5 5

61 R901429695 Z2S 6-1-6X/V/60 J3 10 5 21548R900347495 Z2S 6-1-6X/ 10 5R900347496 Z2S 6-2-6X/ 5 5R900347498 Z2S 6A1-6X/ 5 5R900347499 Z2S 6A2-6X/ 5 5R900347501 Z2S 6B1-6X/ 5 5R900347502 Z2S 6B2-6X/ 5 5R900347504 Z2S 6-1-6X/V 5 5R900347505 Z2S 6-2-6X/V 5 5R900347507 Z2S 6A1-6X/V 5 5






ex works

Data sheet

62 R900407394 Z2S 10-1-3X/ 10 5 21553R900407424 Z2S 10A1-3X/ 5 5R900407434 Z2S 10B1-3X/ 5 5R900407439 Z2S 10-1-3X/V 5 5R900421985 Z2S 10-2-3X/ 5 5

63 R900328797 Z2S 16-1-5X/ 10 5 21558R900328798 Z2S 16A1-5X/ 5 5

64 R900432915 Z2S 22-1-5X/ 5 5 2156465 R900491117 SL 6 PB1-6X/ 5 5 2146066 R900483368 SV 10 GA1-4X/ 5 5 21468

R900483369 SV 10 PA1-4X/ 5 5R900483370 SL 10 GA1-4X/ 5 5R900483371 SL 10 PA1-4X/ 5 5R900587554 SL 20 GA1-4X/ 5 5R900587558 SV 30 PA1-4X/ 5 5R900587559 SL 20 PA1-4X/ 5 5R900587560 SL 30 PA1-4X/ 5 5R901273456 SL 20 PB3-4X/QMG24 5 5R901426797 SL 20 GB3-4X/QMG24 5 5R901426802 SL 30 PB3-4X/QMG24 2 5R901426805 SL 10 PB3-4X/QMG24 5 5R901426808 SL 10 GB3-4X/QMG24 5 5R901426810 SL 30 GB3-4X/QMG24 2 5

68 R900937595 Z4WE 6 E63-3X/EG24N9K4 5 5 23193R900940791 Z4WE 6 E63-3X/EG24K4QMAG24 5 5R901087021 Z4WE 6 X250-3X/EG24N9K4/V/60 5 5

Directional valves69 R900052392 M-3SED 6 CK1X/350CG24N9K4 5 5 22049

R900052621 M-3SED 6 UK1X/350CG24N9K4 5 5R900223676 M-3SED 6 UK1X/350CG24K4 5 5R900224526 M-3SED 6 CK1X/350CG24N9K4/V 5 5

70 R900051053 M-3SED 10 UK1X/350CG24N9K4 5 5 22045R900086685 M-3SED 10 CK1X/350CG24N9K4 5 5

71 R900566273 M-3SEW 6 C3X/420MG24N9K4 5 5 22058R900566279 M-3SEW 6 C3X/630MG24N9K4 5 5R900566283 M-3SEW 6 U3X/420MG24N9K4 5 5R900566289 M-3SEW 6 U3X/630MG24N9K4 5 5R900570174 M-3SEW 6 U3X/420MG24N9K4/V 5 5

72 R900548772 4WE 6 J6X/EG24N9K4/V 5 5 23178R900549534 4WE 6 HA6X/EG24N9K4 10 5R900550062 4WE 6 D6X/EG24NK4QMBG24 5 5R900550312 4WE 6 J6X/EG24NK4 5 5R900551703 4WE 6 J6X/EW110N9K4 5 5R900551704 4WE 6 D6X/EW110N9K4 5 5R900552009 4WE 6 G6X/EG24N9K4/V 5 5R900552321 4WE 6 D6X/OFEW110N9K4 5 5R900553670 4WE 6 HB6X/EG24N9K4 10 5R900554753 4WE 6 D6X/EG24K4 5 5R900556472 4WE 6 Y6X/EG24K4QMAG24 5 5






ex works

Data sheet

72 R900558641 4WE 6 E6X/EW110N9K4 5 5 23178R900558642 4WE 6 G6X/EW110N9K4 5 5R900561180 3WE 6 A6X/EG24N9K4 10 5R900561270 3WE 6 B6X/EG24N9K4 10 5R900561272 4WE 6 C6X/EG24N9K4 10 5R900561274 4WE 6 D6X/EG24N9K4 10 5R900561276 4WE 6 Y6X/EG24N9K4 10 5R900561278 4WE 6 E6X/EG24N9K4 10 5R900561280 4WE 6 EA6X/EG24N9K4 10 5R900561281 4WE 6 EB6X/EG24N9K4 10 5R900561282 4WE 6 G6X/EG24N9K4 10 5R900561284 4WE 6 GA6X/EG24N9K4 10 5R900561286 4WE 6 H6X/EG24N9K4 10 5R900561288 4WE 6 J6X/EG24N9K4 10 5R900561290 4WE 6 JA6X/EG24N9K4 10 5R900561291 4WE 6 JB6X/EG24N9K4 10 5R900561292 4WE 6 Q6X/EG24N9K4 10 5R900564105 4WE 6 D6X/EG24N9K4/V 5 5R900564107 4WE 6 C6X/OFEG24N9K4 10 5R900567512 4WE 6 D6X/OFEG24N9K4 10 5R900568233 4WE 6 W6X/EG24N9K4 10 5R900571012 4WE 6 R6X/EG24N9K4 10 5R900572785 4WE 6 U6X/EG24N9K4 10 5R900574632 4WE 6 D6X/EG24K4QMBG24 5 5R900577475 4WE 6 M6X/EG24N9K4 10 5R900578186 4WE 6 UA6X/EG24N9K4 10 5R900901751 4WE 6 L6X/EG24N9K4 5 5R900903464 4WE 6 E6X/EG24N9K4/V 5 5R900903465 4WE 6 D6X/OFEG24N9K4/V 5 5R900905896 4WE 6 Y6X/EW110N9K4 5 5R900906460 4WE 6 HA6X/EW110N9K4 5 5R900906672 4WE 6 H6X/EW110N9K4 5 5R900909415 4WE 6 Y6X/EW230N9K4 5 5R900909559 4WE 6 D6X/EW230N9K4 5 5R900909636 4WE 6 Y6X/EG24N9K4/V 5 5R900910413 4WE 6 D6X/EG24N9K4QMBG24 5 5R900911762 4WE 6 J6X/EW230N9K4 5 5R900912492 4WE 6 E6X/EW230N9K4 5 5R900912493 4WE 6 G6X/EW230N9K4 5 5R900912494 4WE 6 H6X/EW230N9K4 5 5R900912495 4WE 6 HA6X/EW230N9K4 5 5R900914070 4WE 6 Q6X/EG24N9K4/V 5 5R900915095 4WE 6 D6X/OFEW230N9K4 5 5R900939610 4WE 6 GA6X/EG24N9K4/V 5 5

73 R901009516 4WE 6 E6X/EG24NXEZ2 3 20 23178-XER901021443 4WE 6 D6X/EG24NXEZ2 3 20R901021653 4WE 6 J6X/EG24NXEZ2 3 20






ex works

Data sheet

74 R901087087 4WE 6 E7X/HG24N9K4 10 5 23164R901087088 4WE 6 D7X/HG24N9K4 10 5R901089241 4WE 6 J7X/HG24N9K4 10 5R901089243 4WE 6 Y7X/HG24N9K4 10 5R901089244 3WE 6 A7X/HG24N9K4 10 5R901089245 4WE 6 C7X/HG24N9K4 10 5R901130745 4WE 6 H7X/HG24N9K4 10 5R901130746 4WE 6 D7X/OFHG24N9K4 10 5R901130747 4WE 6 G7X/HG24N9K4 10 5R901133322 4WE 6 HA7X/HG24N9K4 10 5

75 R900546257 4WE 6 D73-6X/EG24N9K4/A12 5 5 23183R900550284 4WE 6 H73A6X/EG24N9K4/A12 5 5R900567095 4WE 6 E73-6X/EG24N9K4/A12 5 5R900567269 4WE 6 W73-6X/EG24N9K4/A12 5 5R900567997 4WE 6 J73-6X/EG24N9K4/A12 5 5R900572783 4WE 6 G73-6X/EG24N9K4/A12 5 5R900906660 4WE 6 H73-6X/EG24N9K4/A12 5 5

76 R901278744 4WE 10 J5X/EG24N9K4/M 10 5 23340R901278760 4WE 10 D5X/EG24N9K4/M 10 5R901278761 4WE 10 E5X/EG24N9K4/M 10 5R901278762 4WE 10 H5X/EG24N9K4/M 10 5R901278763 4WE 10 D5X/OFEG24N9K4/M 10 5R901278768 4WE 10 G5X/EG24N9K4/M 10 5R901278769 4WE 10 Y5X/EG24N9K4/M 10 5R901278770 3WE 10 A5X/EG24N9K4/M 10 5R901278772 4WE 10 C5X/EG24N9K4/M 10 5R901278773 4WE 10 W5X/EG24N9K4/M 10 5R901278774 4WE 10 Q5X/EG24N9K4/M 10 5R901278775 4WE 10 EA5X/EG24N9K4/M 10 5R901278778 4WE 10 U5X/EG24N9K4/M 10 5R901278779 4WE 10 HA5X/EG24N9K4/M 10 5R901278780 4WE 10 EB5X/EG24N9K4/M 10 5R901278782 4WE 10 JA5X/EG24N9K4/M 10 5R901278784 4WE 10 R5X/EG24N9K4/M 10 5R901278787 4WE 10 M5X/EG24N9K4/M 10 5R901341855 4WE10J73-5X/EG24N9K4/A12M 10 5

77 R900449957 4WH 6 D5X/ 5 5 22282R900470476 4WH 6 C5X/ 5 5R900755395 4WP 6 D6X/N 5 5

78 R900405611 4WMM 6 E5X/F 5 5 22280R900465984 4WMR 6 D5X/ 5 5R900466583 4WMM 6 J5X/F 5 5R900467936 4WMM 6 E5X/ 5 5R900469301 4WMM 6 D5X/F 5 5R900469302 4WMM 6 J5X/ 5 5






ex works

Data sheet

79 R901350184 4WMM 10 J5X//M 5 5 22334R901350264 4WMM 10 J5X/F/M 5 5R901350265 4WMM 10 E5X//M 5 5R901350271 4WMM 10 D5X//M 5 5R901362425 4WP 10 H5X//M 5 5R901410278 4WMM 10 J5X/J5/M 5 5

80 R900923971 4WEH 16 E7X/6EG24N9ETK4/B10 5 5 24751R900924874 4WEH 16 D7X/6EG24N9ETK4/B10 5 5R900925580 4WEH 16 J7X/6EG24N9K4 5 5R900929900 4WEH 16 J7X/6EG24N9ETS2K4/B10 5 5R900930431 4WEH 16 J7X/6EG24N9ETK4/B10 5 5R900943462 4WEH 10 D4X/6EG24N9ETK4/B10 5 5R900948924 4WEH 10 J4X/6EG24N9ETK4/B10 5 5R900952630 4WEH 10 E4X/6EG24N9ETK4/B10 5 5

Pressure valves81 R900423717 DBDS 6 G1X/100 5 5 25402

R900423719 DBDS 6 G1X/200 5 5R900423720 DBDS 6 G1X/315 5 5R900423721 DBDS 6 G1X/400 5 5R900423722 DBDS 6 G1X/50 5 5R900423729 DBDS 6 P1X/200 5 5R900423730 DBDS 6 P1X/315 5 5

81 R901422002 ZDB6DP2-2X/350MPV 10 5 25771R901423483 ZDB6DA2-2X/350V 10 5R901423490 ZDB6DB2-2X/350V 10 5R901423497 Z2DB6DC2-2X/350V 10 5

83 R901232957 ZDB10DP2-2X/200V 5 5 25774R901232959 ZDB10DP2-2X/350V 5 5R901232960 Z2DB10DC2-2X/350V 5 5R901233033 Z2DB10DC2-2X/200V 5 5

84 R900409844 ZDB 6 VP2-4X/200V 5 5 25751R900409886 ZDB 6 VA2-4X/200V 5 5R900409889 ZDB 6 VA2-4X/100V 5 5R900409893 ZDB 6 VA2-4X/315V 5 5R900409898 ZDB 6 VP2-4X/315V 5 5R900409933 ZDB 6 VP2-4X/100V 5 5R900411312 Z2DB 6 VC2-4X/200V 5 5R900411314 Z2DB 6 VD2-4X/200V 5 5R900411315 Z2DB 6 VC2-4X/100V 5 5R900411318 Z2DB 6 VC2-4X/315V 5 5R900411357 Z2DB 6 VD2-4X/315V 5 5

85 R900409958 ZDB 10 VP2-4X/315V 5 5 2576186 R900502117 DB 20-1-5X/200 5 5 25802

R900505052 DB 10-1-5X/200 5 5R900506798 DBC 30-2-5X/50 5 5R900587346 DB 20-1-5X/315 5 5R900587772 DB 10-2-5X/200 5 5R900590334 DB 10-2-5X/315 5 5R900590618 DB 20-2-5X/350 5 5






ex works

Data sheet

86 R900590768 DB 20-2-5X/200 5 5 25802R900593530 DB 20-2-5X/315 5 5R900593794 DB 10-1-5X/350 5 5R900593795 DB 30-1-5X/315 5 5R900596259 DBC 2-5X/315 5 5R900598998 DB 10-1-5X/315 5 5R900906285 DBW 10 B2-5X/315-6EG24N9K4 5 5R900907684 DBW 20 B2-5X/315-6EG24N9K4 5 5R900912910 DBW 10 B2-5X/200-6EG24N9K4 5 5R900954578 DBW 30 B2-5X/315U6EG24N9K4 5 5

87 R900413241 DR 6 DP2-5X/75Y 5 5 26564R900413242 DR 6 DP2-5X/150Y 5 5R900450964 DR 6 DP2-5X/75YM 5 5R900455316 DR 6 DP2-5X/210YM 5 5R900466591 DR 6 DP1-5X/75YM 5 5R900472020 DR 6 DP2-5X/150YM 5 5R900472470 DR 6 DP2-5X/25YM 5 5R900481034 DR 6 DP1-5X/210Y 5 5

88 R900500226 DR 10 DP2-4X/150YM 5 5 2658089 R900409966 ZDR 6 DA1-4X/75Y 5 5 26570

R900409967 ZDR 6 DP1-4X/75YM 10 5R900410806 ZDR 6 DP1-4X/150YM 10 5R900410808 ZDR 6 DA2-4X/25Y 10 5R900410813 ZDR 6 DA2-4X/75Y 10 5R900410849 ZDR 6 DA2-4X/150Y 10 5R900410855 ZDR 6 DA2-4X/210Y 10 5R900410864 ZDR 6 DA3-4X/75Y 5 5R900410865 ZDR 6 DP3-4X/75YM 5 5R900431172 ZDR 6 DB2-4X/150YM 10 5R900431771 ZDR 6 DB2-4X/75YM 10 5R900445958 ZDR 6 DA2-4X/150YM 5 5R900463269 ZDR 6 DB2-4X/210YM 10 5R900476381 ZDR 6 DP1-4X/210YM 10 5R900483785 ZDR 6 DP2-4X/25YM 10 5R900483786 ZDR 6 DP2-4X/75YM 10 5R900483787 ZDR 6 DP2-4X/150YM 10 5R900483788 ZDR 6 DP2-4X/210YM 10 5

90 R900406651 ZDR 10 DA2-5X/210Y 10 5 26585R900408340 ZDR 10 DB2-5X/150YM 10 5R900410875 ZDR 10 DP2-5X/75YM 10 5R900410876 ZDR 10 DP2-5X/210YM 10 5R900410880 ZDR 10 DP2-5X/150YM 10 5R900410884 ZDR 10 DA2-5X/150Y 10 5R900431509 ZDR 10 DB2-5X/75YM 10 5R900438008 ZDR 10 DA2-5X/75Y 10 5R900443484 ZDR 10 DB2-5X/210YM 10 5






ex works

Data sheet

91 R900503741 DR 10-5-5X/200Y 5 5 26892R900596500 DR 30-5-5X/200Y 5 5R900597158 DR 30-5-5X/200YM 5 5R900597233 DR 20-5-5X/200YM 5 5R900597892 DR 20-5-5X/200Y 5 5R900598358 DR 10-5-5X/200YM 5 5

92 R901159724 Z3DR 6 VP2-1X/200V 10 5 26871R901160091 Z3DR 6 VP2-1X/50V 10 5R901232899 Z3DR 6 VP2-1X/315V 10 5R901434869 Z3DR 6 VP2-1X/100V 10 5

93 R901224233 DA 6 VP2A5X/200FSM 5 5 26405R901224247 DA 6 VP2A5X/350FSM 5 5

Flow control valves94 R900439389 Z2FS 6 A2-4X/2QV 5 5 27506

R900440565 Z2FS 6 B2-4X/2QV 5 5R900455714 Z2FS 6-3-4X/2QV 5 5R900476838 Z2FS 6-5-4X/2QV 5 5R900481621 Z2FS 6-2-4X/1Q 5 5R900481622 Z2FS 6-2-4X/2Q 5 5R900481623 Z2FS 6-2-4X/1QV 5 5R900481624 Z2FS 6-2-4X/2QV 5 5

95 R900517812 Z2FS 10-5-3X/V 5 5 27518R900523578 Z2FS 10A5-3X/S2V 5 5

96 R900457256 Z2FS 16-8-3X/S2 5 5 27526R900459203 Z2FS 16-8-3X/S 5 5R900473688 Z2FS 16-8-3X/S2V 5 5

97 R900443176 Z2FS 22-8-3X/S2 5 5 27536R900456783 Z2FS 22-8-3X/S 5 5

98 R900422145 MG 10 G1X/V 5 5 27219R900422150 MG 20 G1X/V 5 5R900423326 MK 15 G1X/V 5 5R900423328 MK 20 G1X/V 5 5R900423340 MK 6 G1X/V 5 5R900423343 MK 8 G1X/V 5 5R900424579 MK 10 G1X/V 5 5R900437338 MG 6 G1X/V 5 5R900437653 MG 15 G1X/V 5 5R900438885 MG 8 G1X/V 5 5

99 R900205506 2FRM 6 B36-3X/1,5QMV 5 5 28163R900205507 2FRM 6 B36-3X/1,5QRV 5 5R900205509 2FRM 6 B36-3X/10QRV 5 5R900205510 2FRM 6 B36-3X/16QMV 5 5R900205511 2FRM 6 B36-3X/16QRV 5 5R900205513 2FRM 6 B36-3X/25QRV 5 5R900205517 2FRM 6 B36-3X/3QRV 5 5R900205519 2FRM 6 B36-3X/6QRV 5 5R900205522 2FRM 6 B76-3X/16QRV 5 5R900205526 2FRM 6 B76-3X/32QRV 5 5R900489356 Z4S 6-1X/V 5 5






ex works

Data sheet

100 R900420286 2FRM 10-3X/50L 5 5 28389R900423261 2FRM 10-3X/50LB 5 5R900424902 2FRM 16-3X/160LB 5 5R900424906 2FRM 16-3X/160L 5 5R900425901 Z4S 16-2X/ 5 5R900514779 Z4S 10-3X/ 5 5

101 R900549687 Z2FRM 6 CB2-2X/32QRV 5 5 28164R900549688 Z2FRM 6 BB2-2X/32QRV 5 5R900549689 Z2FRM 6 AB2-2X/32QRV 5 5R900908807 Z2FRM 6 TB2-2X/32QRV 5 5

2-way cartridge valves102 R900905302 LFA 25 D-7X/F 10 5 21010

R900905303 LFA 32 D-7X/F 10 5R900906337 LC 32 A20E7X/ 5 5R900909245 LC 32 A05D7X/ 5 5R900909251 LC 25 A05D7X/ 5 5R900909570 LC 32 B05E7X/ 5 5R900909662 LC 32 A40E7X/ 5 5R900909665 LC 32 A40D7X/ 5 5R900910269 LC 16 A20E7X/ 5 5R900910270 LC 25 A20E7X/ 5 5R900912565 LC 16 A00E7X/ 5 5R900912566 LC 16 A05E7X/ 5 5R900912567 LC 16 A10E7X/ 5 5R900912568 LC 16 A40E7X/ 5 5R900912569 LC 16 A10D7X/ 5 5R900912570 LC 16 A00D7X/ 5 5R900912572 LC 16 A20D7X/ 5 5R900912573 LC 16 A40D7X/ 5 5R900912574 LC 25 A40E7X/ 5 5R900912575 LC 25 A00E7X/ 5 5R900912576 LC 25 A05E7X/ 5 5R900912577 LC 25 A10E7X/ 5 5R900912578 LC 25 A10D7X/ 5 5R900912579 LC 25 A00D7X/ 5 5R900912580 LC 25 A20D7X/ 5 5R900912581 LC 25 A40D7X/ 5 5R900912583 LC 32 A10E7X/ 5 5R900912585 LC 32 A05E7X/ 5 5R900912586 LC 32 A00E7X/ 5 5R900912587 LC 32 A00D7X/ 5 5R900912588 LC 32 A10D7X/ 5 5R900912589 LC 32 A20D7X/ 5 5R900912610 LC 32 B40E7X/ 5 5R900912613 LC 32 B20E7X/ 5 5R900912625 LFA 16 D-7X/F 10 5R900912687 LFA 25 WEMA-7X/ 5 5R900912721 LFA 32 WEMA-7X/ 5 5R900912736 LFA 16 WEMA-7X/ 5 5






ex works

Data sheet

102 R900927973 LC 40 A40E7X/ 5 5 21010R900935732 LC 40 A40D7X/ 5 5R900937994 LC 40 A00E7X/ 5 5R900937996 LC 40 A05E7X/ 5 5R900937998 LC 40 A10E7X/ 5 5R900937999 LC 40 A20D7X/ 5 5R900938000 LC 40 A20E7X/ 5 5R900938007 LC 40 B20E7X/ 5 5R900938020 LC 50 A00E7X/ 5 5R900938073 LFA 40 D-7X/F 10 5R900938144 LFA 40 WEMA-7X/ 5 5R900938150 LFA 50 D-7X/F 10 5R900967287 LC 50 A00D7X/ 5 5R900973493 LC 40 A00D7X/ 5 5

103 R900910773 LC 32 DB40E7X/ 5 5 21050R900912531 LC 16 DB20E7X/ 5 5R900912532 LC 16 DB40E7X/ 5 5R900912543 LC 32 DB20E7X/ 5 5R900912546 LC 16 DB20D7X/ 5 5R900912549 LC 25 DB20E7X/ 5 5R900912550 LC 25 DB40E7X/ 5 5R900912552 LC 25 DB20D7X/ 5 5R900912555 LC 25 DB40D7X/ 5 5R900912556 LC 32 DB20D7X/ 5 5R900927969 LC 40 DB40E7X/ 5 5R900938012 LC 40 DB20E7X/ 5 5

Proportional servo valvesProportional directional valves106 R900558355 4WRAE 6 E30-2X/G24N9K31/A1V 3 5 29055

R900558356 4WRAE 10 E60-2X/G24N9K31/A1V 5 5R900732536 4WRAE 10 W1-60-2X/G24K31/F1V 3 5R900900987 4WRAE 6 W30-2X/G24N9K31/A1V 3 5R900900988 4WRAE 10 W60-2X/G24N9K31/A1V 5 5R900907650 4WRA 10 W60-2X/G24N9K4/V 5 5R900908938 4WRAE 6 W15-2X/G24N9K31/A1V 3 5R900909389 4WRAE 6 E15-2X/G24N9K31/A1V 3 5R900920055 4WRAE 10 W60-2X/G24N9K31/F1V 3 5R900929318 4WRAE 10 E60-2X/G24N9K31/F1V 3 5

107 R900246793 4WREE 6 W32-2X/G24K31/F1V 5 5 29061R900907114 4WREE 6 E32-2X/G24K31/A1V 5 5R900907440 4WREE 6 V16-2X/G24K31/A1V 5 5R900909367 4WREE 6 V08-2X/G24K31/A1V 5 5R900911004 4WREE 6 W32-2X/G24K31/A1V 5 5R900911681 4WREE 6 V32-2X/G24K31/A1V 5 5R900912156 4WREE 6 E08-2X/G24K31/A1V 5 5R900913359 4WREE 6 W1-32-2X/G24K31/A1V 5 5R900915686 4WREE 6 E1-16-2X/G24K31/A1V 5 5R900920567 4WREE 6 E16-2X/G24K31/A1V 5 5






ex works

Data sheet

107 R900923000 4WREE 6 W08-2X/G24K31/A1V 3 5 29061R900924607 4WREE 10 V75-2X/G24K31/A1V 5 5R900925657 4WREE 6 W16-2X/G24K31/A1V 5 5R900925733 4WREE 6 E32-2X/G24K31/F1V 3 5R900927230 4WREE 10 E75-2X/G24K31/A1V 5 5R900927231 4WREE 10 E50-2X/G24K31/A1V 5 5R900927232 4WREE 10 E1-75-2X/G24K31/A1V 5 5R900927233 4WREE 10 W75-2X/G24K31/A1V 5 5R900927234 4WREE 10 W1-75-2X/G24K31/A1V 5 5R900927235 4WREE 10 V50-2X/G24K31/A1V 5 5R900927356 4WREE 10 E75-2X/G24K31/F1V 3 5R900928553 4WREE 6 E1-32-2X/G24K31/A1V 5 5R900928726 4WREE 6 E08-2X/G24K31/F1V 5 5R900931371 4WREE 10 W50-2X/G24K31/A1V 5 5R900933076 4WREE 10 E1-50-2X/G24K31/A1V 3 5R900933077 4WREE 10 W1-50-2X/G24K31/A1V 5 5R900939627 4WREE 6 W1-16-2X/G24K31/A1V 3 5R900941623 4WREE 6 E16-2X/G24K31/F1V 3 5R900948360 4WREE 10 W75-2X/G24K31/F1V 3 5R900965185 4WREE 10 W1-50-2X/G24K31/F1V 5 5R900976119 4WREE 10 W1-75-2X/G24K31/F1V 3 5

108 R900704206 4WRZ 10 W6-85-7X/6EG24N9ETK4/D3M 3 5 29115R900765029 4WRZE 10 W6-85-7X/6EG24N9ETK31/A1D3M 3 5R900954665 4WRZE 16 W6-150-7X/6EG24K31/A1M 5 5R900977490 4WRZE 16 W6-150-7X/6EG24N9ETK31/A1D3M 5 5

109 R900704916 4WRKE 16 E200L-3X/6EG24ETK31/A1D3M 3 5 29075R900727361 4WRKE 16 E200L-3X/6EG24EK31/A1D3M 3 5R900973369 4WRKE 25 E350L-3X/6EG24K31/A1D3M 3 5

Proportional pressure valves110 R901029968 DBETE-6X/200G24K31A1V 5 5 29162

R901029969 DBETE-6X/315G24K31A1V 5 5R901029970 DBETE-6X/350G24K31A1V 5 5R901064278 DBETE-6X/315YG24K31A1V 5 5R901064548 DBETE-6X/350YG24K31A1V 5 5R901064677 DBETE-6X/200YG24K31A1V 5 5

111 R901352135 DBETA-6X/P350G24K31A1V 5 5 29262112 R901323940 DBEE6-2X/315G24K31A1M 3 5 29258113 R901335399 DBEM 10-7X/315YG24K4M 5 5 29361

R901344448 DBEME 10-7X/315YG24K31A1M 5 5R901353070 DBEME 20-7X/315YG24K31A1M 5 5

114 R900955784 3DREPE 6 C-2X/25EG24N9K31/A1M 5 5 29184R900955887 3DREP 6 C-2X/25EG24N9K4/M 5 5

115 R900915963 ZDRE 6 VP2-1X/210MG24K4M 10 5 29175R901319105 ZDREE 6 VP2-1X/210MG24K24A1M 2 10

116 R901198302 ZDREE 10 VP2-2X/200XLMG24K31A1M 10 5 29279117 0811402080 DREBE 6X-1X/175MG24K31A1M 5 5 29195

0811402081 DREBE 6X-1X/310MG24K31A1M 5 50811402082 DREBE 6X-1X/75MG24K31A1M 5 5






ex works

Data sheet

Directional control valves118 R901382312 4WRPEH 6 C3B12L-3X/M/24A1 5 5 29121

R901382313 4WRPEH 6 C3B24L-3X/M/24A1 5 5R901382315 4WRPEH 6 C3B40L-3X/M/24A1 5 5R901382317 4WRPEH 6 C4B04L-3X/M/24A1 5 5R901382318 4WRPEH 6 C4B12L-3X/M/24A1 5 5R901382319 4WRPEH 6 C4B40L-3X/M/24A1 5 5R901382323 4WRPEH 6 C3B15P-3X/M/24A1 5 5R901382325 4WRPEH 6 C1B40L-3X/M/24A1 5 5R901382331 4WRPEH 6 C4B12L-3X/M/24F1 5 5R901382345 4WRPEH 6 C3B04L-3X/M/24A1 5 5R901382346 4WRPEH 6 C4B24L-3X/M/24A1 5 5R901382347 4WRPEH 6 C3B04L-3X/M/24F1 5 5R901382348 4WRPEH 6 C3B12L-3X/M/24F1 5 5R901382350 4WRPEH 6 C3B40L-3X/M/24F1 5 5R901382353 4WRPEH 6 CB40L-3X/M/24A1 5 5R901382356 4WRPEH 6 C4B02L-3X/M/24A1 5 5R901382358 4WRPEH 6 C3B40P-3X/M/24A1 5 5R901382359 4WRPEH 6 C4B15P-3X/M/24A1 5 5R901382361 4WRPEH 6 C4B25P-3X/M/24A1 5 5R901382363 4WRPEH 6 C4B40P-3X/M/24A1 5 5R901382367 4WRPEH 6 C3B02L-3X/M/24A1 5 5R901382368 4WRPEH 6 C5B40L-3X/M/24A1 5 5

119 0811404800 4WRPEH 10 C3 B50L-2X/G24K0/A1M 5 5 290370811404801 4WRPEH 10 C3 B100L-2X/G24K0/A1M 5 50811404803 4WRPEH 10 C4 B100L-2X/G24K0/A1M 5 50811404809 4WRPEH 10 C B100L-2X/G24K0/A1M 3 50811404817 4WRPEH 10 C3 B100L-2X/G24K0/F1M 3 50811404820 4WRPEH 10 C1 B50L-2X/G24K0/A1M 2 50811404821 4WRPEH 10 C1 B100L-2X/G24K0/A1M 3 50811404825 4WRPEH 10 C4 B100P-2X/G24K0/A1M 3 50811A04802 4WRPEH 10 C4 B50L-2X/G24K0/A1M 5 5

120 R901396318 4WRLE 25 E400LJ-4X/MXY/24A1 2 5 29123R901396320 4WRLE 27 E600LJ-4X/MXY/24A1 2 5R901401731 4WRLE 25 V370M-4X/MXY/24A1 2 5R901401742 4WRLE 16 V200M-4X/MXY/24A1 2 5R901401779 4WRLE 16 E180SJ-4X/MXY/24A1 2 5R901401887 4WRLE 16 W1-180SJ-4X/MXY/24A1 2 5R901401891 4WRLE 16 W6-200LJ-4X/MXY/24A1 2 5R901404330 4WRLE 16 V120M-4X/MXY/24A1 2 5R901404331 4WRLE 16 V250L-4X/MXY/24A1 2 5R901404332 4WRLE 16 E250LJ-4X/MXY/24A1 2 5R901404336 4WRLE 25 W6-350LJ-4X/MXY/24A1 2 5R901404337 4WRLE 25 V400L-4X/MXY/24A1 2 5R901404338 4WRLE 27 W6-430LJ-4X/MXY/24A1 2 5R901404339 4WRLE 27 V600L-4X/MXY/24A1 2 5R901404876 4WRLE 25 W350SJ-4X/MXY/24A1 2 5R901423297 4WRLE 25 E350SJ-4X/MXY/24A1 2 5






ex works

Data sheet

Control blocks and platesSubplates122 R900424447 G06A-1X/G1/4-24 10 5 45100

R900424448 G06A-1X/G3/8-44 10 5R900455110 G06A-1X/G1/2-54 5 5

123 R900424460 G10A-1X/G1/2-34 5 5R900467259 G10A-1X/G3/4-44 5 5

124 R900411117 G10E-1X/G1/2G1/4-32 5 5

Cover plates125 R900316232 HSA 06 A001-3X/M00 10 5 48042

Manifolds126 R900170948 REIHENPLATTE 2HSR06-35/01C PHOSPH& 16 10 48107

R900170949 REIHENPLATTE 3HSR06-35/01C PHOSPH& 8 10R900170950 REIHENPLATTE 4HSR06-35/01C PHOSPH& 4 10R900170951 REIHENPLATTE 5HSR06-35/01C PHOSPH& 2 10R900170952 REIHENPLATTE 6HSR06-35/01C PHOSPH& 3 10R900170955 REIHENPLATTE 2HSR06-35/01D PHOSPH& 5 10R900170956 REIHENPLATTE 3HSR06-35/01D PHOSPH& 2 10R900170957 REIHENPLATTE 4HSR06-35/01D PHOSPH& 3 10R900172199 REIHENPLATTE 2HSR06-25/01D PHOSPH& 20 10R900172200 REIHENPLATTE 3HSR06-25/01D PHOSPH& 25 10R900172201 REIHENPLATTE 4HSR06-25/01D PHOSPH& 8 10R900172202 REIHENPLATTE 5HSR06-25/01D PHOSPH& 5 10R900172203 REIHENPLATTE 6HSR06-25/01D PHOSPH& 14 10R900172204 REIHENPLATTE 7HSR06-25/01D PHOSPH& 5 10R900172205 REIHENPLATTE 8HSR06-25/01D PHOSPH& 2 10R900172220 REIHENPLATTE 2HSR06-25/01C PHOSPH& 25 10R900172221 REIHENPLATTE 3HSR06-25/01C PHOSPH& 24 10R900172222 REIHENPLATTE 4HSR06-25/01C PHOSPH& 22 10R900172223 REIHENPLATTE 5HSR06-25/01C PHOSPH& 16 10R900172224 REIHENPLATTE 6HSR06-25/01C PHOSPH& 9 10R900172225 REIHENPLATTE 7HSR06-25/01C PHOSPH& 7 10R900172226 REIHENPLATTE 8HSR06-25/01C PHOSPH& 4 10R900188031 REIHENPLATTE 2HSR06-35/01D SO8 PH& 7 10R900188032 REIHENPLATTE 3HSR06-35/01D SO8 PH& 5 10R900188033 REIHENPLATTE 4HSR06-35/01D SO8 PH& 6 10R900188034 REIHENPLATTE 5HSR06-35/01D SO8 PH& 3 10R900188035 REIHENPLATTE 6HSR06-35/01D SO8 PH& 2 10R900194952 REIHENPLATTE 2HSR06-35/01C SO8 PH& 8 10R900194953 REIHENPLATTE 3HSR06-35/01C SO8 PH& 4 10R900194954 REIHENPLATTE 4HSR06-35/01C SO8 PH& 6 10R900194955 REIHENPLATTE 5HSR06-35/01C SO8 PH& 2 10R900194956 REIHENPLATTE 6HSR06-35/01C SO8 PH& 2 10R900644674 REIHENPLATTE 2HSR06-25/01D SO8 PH& 9 10R900644675 REIHENPLATTE 3HSR06-25/01D SO8 PH& 5 10R900644676 REIHENPLATTE 4HSR06-25/01D SO8 PH& 5 10R900644677 REIHENPLATTE 5HSR06-25/01D SO8 PH& 4 10R900644678 REIHENPLATTE 6HSR06-25/01D SO8 PH& 5 10R900644680 REIHENPLATTE 8HSR06-25/01D SO8 PH& 2 10






ex works

Data sheet

126 R900800927 REIHENPLATTE 10HSR06-25/01D PHOSP& 7 10 48107R900804259 REIHENPLATTE 10HSR06-25/01C PHOSP& 6 10R900808525 REIHENPLATTE 9HSR06-25/01D PHOSPH& 5 10R900815077 REIHENPLATTE 1HSR06-25/01C PHOSPH& 6 10R900815078 REIHENPLATTE 1HSR06-25/01D SO8 PH& 4 10R900815079 REIHENPLATTE 1HSR06-35/01C SO8 PH& 8 10

127 R900154881 REIHENPLATTE 2HSR10-15/01C PHOSPH& 5 10 48110R900158686 REIHENPLATTE 2HSR10-15/01D PHOSPH& 5 10R900158687 REIHENPLATTE 3HSR10-15/01D PHOSPH& 2 10R900158688 REIHENPLATTE 4HSR10-15/01D PHOSPH& 2 10R900170962 REIHENPLATTE 2HSR10-35/01C PHOSPH& 3 10R900170963 REIHENPLATTE 3HSR10-35/01C PHOSPH& 2 10R900170970 REIHENPLATTE 5HSR10-35/01D PHOSPH& 2 10R900689383 REIHENPLATTE 2HSR10-35/01C SO8 PH& 4 10R900815075 REIHENPLATTE 1HSR10-35/01C SO8 PH& 4 10

ElectronicsValve amplifiers130 0811405143 VT-SSPA1-525-2X/V0/0 5 5 30264

0811405144 VT-SSPA1-508-2X/V0/0 5 5131 R900702060 VT-MSPA1-1-1X/V0/0 5 5 30223132 R901010980 VT-MSPA2-1-1X/V0/0 5 5 30228133 R900030647 VT 11132-1X/ 5 5 29865134 R900211788 VT 11118-1X/ 5 5 30218135 R900033823 VT-VSPA1-1-1X/ 5 5 30111136 R901002095 VT-VSPA2-1-2X/V0/T5 5 5 30110137 R900249895 VT-MRPA2-1-1X/V0/0 5 5 30219138 R901044346 VT-VPCD-1-1X/V0/1-0-1 5 5 30028

R901089559 VT-VPCD-1-1X/V0/1-P-1 5 5139 R901290194 VT-SSBA1-PWM-1X/V002/5 10 5 30362

R901354308 VT-SSBA1-PWM-1X/V002/10 10 5

Motion140 R901227616 VT-HACD-3-2X/P-I-00/000 5 5 30543

Sensor technology and signal transmitters141 R901342022 HM 20-2X/50-C-K35 10 5 30272

R901342024 HM 20-2x/100-C-K35 10 5R901342026 HM 20-2x/250-C-K35 10 5R901342029 HM 20-2X/315-C-K35 10 5R901342033 HM 20-2x/400-C-K35 10 5R901364927 HM 20-2X/10-C-K35 5 5

142 R901022922 HEDE10A1-2X/250/K41G24/1/V 5 5 30276R901022978 HEDE10A1-2X/400/K41G24/1/V 5 5

142 R901023091 HEDE10A1-2X/250/K41G24/2/V 5 5 30278143 R901141184 HEDE11A1-1X/100/K41G24/2/V 5 5 30279144 R901094159 HED 8 OA-2X/100K14KW 5 5 50061

R901095375 HED 8 OH-2X/100K14S 5 5R901095551 HED 8 OA-2X/100K14KS 5 5R901099775 HED 8 OH-2X/100K14V 5 5R901099789 HED 8 OH-2X/200K14V 5 5






ex works

Data sheet

144 R901099808 HED 8 OH-2X/200K14 5 5 50061R901099815 HED 8 OH-2X/350K14V 5 5R901101640 HED 8 OH-2X/350K14 5 5R901101698 HED 8 OA-2X/50K14 5 5R901102349 HED 8 OH-2X/50K14 5 5R901102360 HED 8 OH-2X/100K14 5 5R901102362 HED 8 OH-2X/200K14S 5 5R901102365 HED 8 OP-2X/350K14S 5 5R901102704 HED 8 OA-2X/50K14S 10 5R901102706 HED 8 OA-2X/100K14 5 5R901102708 HED 8 OA-2X/200K14 5 5R901102710 HED 8 OA-2X/350K14 5 5R901102711 HED 8 OA-2X/100K14S 10 5R901102712 HED 8 OH-2X/50K14S 5 5R901102713 HED 8 OH-2X/350K14S 5 5R901102716 HED 8 OA-2X/350K14KW 5 5R901102722 HED 8 OA-2X/350K14AS 5 5R901102727 HED 8 OA-2X/200K14S 10 5R901102754 HED 8 OA-2X/50K14KW 5 5R901102778 HED 8 OA-2X/350K14S 10 5R901106259 HED 8 OA-2X/100K14A 5 5R901106262 HED 8 OA-2X/100K14AS 5 5R901106448 HED 8 OA-2X/200K14KW 5 5R901106452 HED 8 OA-2X/200K14AS 5 5R901106453 HED 8 OP-2X/350K14 5 5R901106455 HED 8 OA-2X/350K14A 5 5R901106499 HED 8 OA-2X/50K14AS 5 5R901106509 HED 8 OP-2X/100K14S 5 5

Electronics accessories145 R900020153 VT3002-1-2X/32D 5 5 29928

R900020154 VT3002-1-2X/48F 5 5

Mobile electronics146 R917A08181 RC12-10/30 (incl. BODAS run-time system) 5 5 95204

R917A08180 RC20-10/30 (incl. BODAS run-time system) 5 5R917A07683 RC28-14/30 (incl. BODAS run-time system) 5 5R902603622 Mating connector kit / Connector-Kit 154-Pin for

RC12-10/30, RC20-10/30, RC28-14/30 and RC36-20/30

5 5

146 R917A08015 RC4-5/30 (not for BODAS design) 5 5 95205R917008789 Mating connector 4-5 5 5

147 R917000301 DSM1-10 5 5 95132R917002704 Mating connector / connector AMP for DSM1-10 5 5

147 R917008823 PR3 - 250 G S 05 / 10 5 5 95155R917008824 PR3 - 400 G S 05 / 10 5 5R917008825 PR3 - 600 G S 05 / 10 5 5R902602132 Mating connector / connector PR3 AMP Superseal 1.5

3-pole5 5

R902603524 Mating connector / connector PR3 DT04 3-pole for PR3 600-M D 36

5 5

147 0538009252 Temperature sensor for fluid 20 5 95180






ex works

Data sheet

147 0538009203 Temperature sensor for air 20 5 951811834484094 Connector for temperature sensor 10 5

148 R902109418 BODAS service 3.x diagnosis 5 5 95086R902109417 BODAS service 3.x flash tool 1 5 5R902109416 BODAS service 3.x full version 1 5 5R902109422 BODAS service connection cable (CAN and RS232) 5 5R902602780 CAN-USB interface 5 5R909831291 Diagnostics connector (8-pin) 5 5

149 R902091800 RA2-1/10 5 5 95230R902603063 Mating connector / connector 25-Pin JUNIOR-TIMER

for RA5 5

SystemsElectro-hydraulic control systems152 R901435669 SYDFED-3X/071R-VRB22U99-0000-A0ANVXX 2 10 30630

R901127561 SYDFEE-3X/071R-VRB22U99-0000-A0A0VXX 2 10R901127563 SYDFEE-3X/100R-VSB22U99-0000-A0A0VXX 2 10R901127565 SYDFEE-3X/140R-VSB22U99-0487-A0A0VXX 2 10R901135305 SYDFEE-3X/140R-VSB22U99-0487-A2A0FLX 2 10R901135309 SYDFEE-3X/071R-VRB22U99-0479-A2A0FLX 2 10R901135310 SYDFEE-3X/100R-VSB22U99-0000-A2A0FLX 2 10R901135311 SYDFE1-3X/071R-VRB22U99-0000-A0X0XXX 2 10R901135312 SYDFE1-3X/100R-VSB22U99-0000-A0X0XXX 2 10R901135313 SYDFE1-3X/140R-VSB22U99-0000-A0X0XXX 2 10R901156589 SYDFEE-3X/100R-VSB22U99-0479-A0A0VXX 2 10R901435666 SYDFED-3X/140R-VSB22U99-0000-A0ANVXX 2 10R901435668 SYDFED-3X/100R-VSB22U99-0000-A0ANVXX 2 10R901353720 SYDFEn-3X/071R-VRB22U99-0000-A0R0V 2 10R901401568 SYDFEn-3X/140R-VSB22U99-0000-A0R0V 2 10R901432084 SYDFEn-3X/100R-VSB22U99-0000-A0R0V 2 10

153 R901263598 VT5041-3X/2-0 5 10 30242R901196678 VT5041-3X/3-0 5 10R901236404 VT5041-3X/1-0 5 10

Power unitsMotor-pump groups156 R901397619 ABAPG-A10VSO 18DFR1VPA/ 7,5CB4533/SE HOY 1 10 51180157 R901397396 ABAPG-V7- 10- 14MC0-16/ 3,0CA4533/S HOY 1 10 51181

R901397858 ABAPG-V7- 40- 45MC0-16/11,0CB4533/SE HOY 1 10157 R901305584 ABAPG-V7- 40- 45MC0-16/11,0CB4523/SE HOY 1 10 51171






ex works

Data sheet

AccumulatorsHydro-pneumatic accumulators160 R901164365 HAD0,7-210-1X/0G04E-1N111-BA 2 10 50150

R901164366 HAD0,7-350-2X/2G04E-1N111-BA 2 10R901164367 HAD1,0-200-1X/2G04E-1N111-BA 2 10R901164368 HAD1,4-140-1X/2G04E-1N111-CE 2 10R901164369 HAD1,4-250-1X/0G04E-1N111-CE 2 10R901164370 HAD1,4-350-2X/2G04E-1N111-CE 2 10R901164371 HAD2,0-100-1X/2G05E5-1N111-CE 2 10R901164372 HAD2,0-250-1X/2G05E5-1N111-CE 2 10R901183242 HAD0,075-250-1X/2Z04F-1N111-BA 2 10R901183248 HAD0,16-250-1X/0Z06F-1N111-BA 2 10R901183250 HAD0,35-210-1X/0Z06C-1N111-BA 2 10R901183251 HAD0,5-160-1X/2Z06C-1N111-BA 2 10R901183253 HAD0,5-250-2X/2Z06C-1N111-BA 2 10R901395898 HAD2,8-250-2X/0G05E5-1N111-CE 2 10R901395958 HAD3,5-250-2X/0G05E5-1N111-CE 2 10

161 R901435300 HAB1-350-6X/0G05G-2N111-BA 2 10 50171R901435301 HAB2,5-350-6X/0G07G-2N111-CE 2 10R901435302 HAB4-350-6X/0G07G-2N111-CE 5 10R901435303 HAB6-350-6X/0G07G-2N111-CE 2 10R901435304 HAB10-330-6X/0G09G-2N111-CE 5 10R901435305 HAB20-330-6X/0G09G-2N111-CE 5 10R901435306 HAB24-330-6X/0G09G-2N111-CE 2 10R901435307 HAB32-330-6X/0G09G-2N111-CE 5 10R901435308 HAB50-330-6X/0G09G-2N111-CE 5 10

Accumulator stations162 R901246327 ABSBG-1X/B 1,0N-BA /10M330 V/B6M DC 3 10 50135

R901246328 ABSBG-1X/B 2,5N-CE /10M330 V/B6M DC 3 10R901246329 ABSBG-1X/B 4,0N-CE /10M330 V/A6M DC 3 10R901246330 ABSBG-1X/B10,0N-CE /20M330 V/A6M DC 3 10R901246331 ABSBG-1X/B20,0N-CE /20M330 V/A6M DC 3 10R901246335 ABSBG-1X/B 1,0N-BA /10E330G 24V/B6M DC 3 10R901246336 ABSBG-1X/B 2,5N-CE /10E330G 24V/B6M DC 3 10R901246337 ABSBG-1X/B 4,0N-CE /10E330G 24V/A6M DC 3 10R901246338 ABSBG-1X/B10,0N-CE /20E330G 24V/A6M DC 3 10R901246339 ABSBG-1X/B20,0N-CE /20E330G 24V/A6M DC 3 10R901246340 ABSBG-1X/B35,0N-CE /30E330G 24V/A6M DC 3 10R901246341 ABSBG-1X/B50,0N-CE /30E330G 24V/A6M DC 3 10R901280003 ABSBG-1X/M 1,4N-CE /10E140G 24V/K6M DC 3 10R901280013 ABSBG-1X/M 1,4N-CE /10M140 V/K6M DC 3 10R901290495 ABSBG-1X/B 2,5N-CE /10M100 V/B6M DC 3 10R901292794 ABSBG-1X/B10,0N-CE /20E210G 24V/A6M DC 3 10R901299040 ABSBG-1X/B10,0N-88 /20E210G 24V/A6M OL 3 10R901301874 ABSBG-1X/B 4,0N-CE /10M210 V/A6M DC 3 10R901301877 ABSBG-1X/B 4,0N-CE /10E210G 24V/A6M DC 3 10






ex works

Data sheet

FiltersBreathing filters164 R928016620 7.002 H10XL-S00-0-M 7 2 51415, 51420

R928016621 7.004 P10-S00-0-M 6 2R928016624 7.006 P10-S00-0-M 7 2R928016625 7.006 P25-S00-0-M 4 2R928028279 7.004 P5-S00-0-M 3 2R928035939 7.004 H10XL-S00-0-M 2 2R928036155 7.004 P25-S00-0-M 5 2R928036781 7.004 H3XL-S00-0-M 4 2R928037343 7.006 H3XL-S00-0-M 10 2R928039681 7.002 P10-S00-0-M 5 2

Tank mounted filters / return flow filters165 R928019846 10TEN0100-H10XLA00-V2,2-M-R4 4 5 51424

Filter systems166 R928016609 80.45/21 P10-S00-0-M 6 2 51478

R928016611 80.45/21 H10XL-S00-0-M 6 2R928016612 80.90 P10-S00-0-M 16 2R928016614 80.90 H10XL-S00-0-M 5 2R928016615 80.130 P10-S00-0-M 5 2R928016617 80.130 H10XL-S00-0-M 10 2R928019197 80.90 H20XL-S00-0-M 10 2R928019199 80.130 H20XL-S00-0-M 6 2R928019201 80.130 H6XL-S00-0-M 5 2R928019212 80.130 H3XL-S00-0-M 7 2R928019215 80.90 H3XL-S00-0-M 4 2R928025275 82.20 P10-S00-0-M 5 2R928025291 82.60D H10XL-S00-5-M 4 2R928025344 82.60 VS40-S00-0-M 3 2R928025436 82.45 P10-S00-0-M 5 2R928037978 80.30/22 H10XL-S00-5-M 3 2R928046571 82.60 P10-S00-0-M 5 2

167 R901337655 ABUKG-15K-4X/0K30/ 46S/ 2,2CA45/ HOY 1 10 50125R901337656 ABUKG-22K-4X/0K26/ 71S/ 2,2CA45/ HOY 1 10R901337662 ABUKG-04K-4X/0K06/ 17G/ 1,1CA45/ HOY 1 10R901337663 ABUKG-07K-4X/0K10/ 23G/ 1,1CA45/ 63 HOY 1 10

Filter elements168 R928005747 1.0120 H10XL-A00-0-M 7 2 51420

R928005800 1.0200 H6XL-A00-0-M 7 2R928005801 1.0200 H10XL-A00-0-M 7 2R928005819 1.0270 H10XL-A00-0-M 5 2R928005835 1.0040 H3XL-A00-0-M 3 2R928005836 1.0040 H6XL-A00-0-M 2 2R928005837 1.0040 H10XL-A00-0-M 6 2R928005838 1.0040 H20XL-A00-0-M 7 2R928005853 1.0063 H3XL-A00-0-M 2 2R928005854 1.0063 H6XL-A00-0-M 2 2R928005855 1.0063 H10XL-A00-0-M 7 2R928005856 1.0063 H20XL-A00-0-M 4 2






ex works

Data sheet

168 R928005871 1.0100 H3XL-A00-0-M 3 2 51420R928005872 1.0100 H6XL-A00-0-M 2 2R928005873 1.0100 H10XL-A00-0-M 6 2R928005874 1.0100 H20XL-A00-0-M 3 2R928005889 1.0160 H3XL-A00-0-M 2 2R928005890 1.0160 H6XL-A00-0-M 2 2R928005891 1.0160 H10XL-A00-0-M 5 2R928005892 1.0160 H20XL-A00-0-M 7 2R928005925 1.0250 H3XL-A00-0-M 2 2R928005926 1.0250 H6XL-A00-0-M 4 2R928005927 1.0250 H10XL-A00-0-M 10 2R928005928 1.0250 H20XL-A00-0-M 7 2R928005961 1.0400 H3XL-A00-0-M 2 2R928005962 1.0400 H6XL-A00-0-M 2 2R928005963 1.0400 H10XL-A00-0-M 8 2R928005964 1.0400 H20XL-A00-0-M 6 2R928005997 1.0630 H3XL-A00-0-M 3 2R928005998 1.0630 H6XL-A00-0-M 4 2R928005999 1.0630 H10XL-A00-0-M 10 2R928006000 1.0630 H20XL-A00-0-M 7 2R928006033 1.1000 H3XL-A00-0-M 3 2R928006034 1.1000 H6XL-A00-0-M 4 2R928006035 1.1000 H10XL-A00-0-M 5 2R928006036 1.1000 H20XL-A00-0-M 6 2R928006643 2.0040 G10-A00-0-M 10 2R928006644 2.0040 G25-A00-0-M 7 2R928006645 2.0040 H3XL-A00-0-M 4 2R928006646 2.0040 H6XL-A00-0-M 2 2R928006647 2.0040 H10XL-A00-0-M 7 2R928006654 2.0040 H3XL-B00-0-M 2 2R928006655 2.0040 H6XL-B00-0-M 2 2R928006656 2.0040 H10XL-B00-0-M 2 2R928006683 2.0040 H10XL-B00-0-V 3 2R928006699 2.0063 H3XL-A00-0-M 3 2R928006700 2.0063 H6XL-A00-0-M 3 2R928006701 2.0063 H10XL-A00-0-M 6 2R928006702 2.0063 H20XL-A00-0-M 7 2R928006708 2.0063 H3XL-B00-0-M 4 2R928006709 2.0063 H6XL-B00-0-M 6 2R928006710 2.0063 H10XL-B00-0-M 6 2R928006753 2.0100 H3XL-A00-0-M 4 2R928006754 2.0100 H6XL-A00-0-M 3 2R928006755 2.0100 H10XL-A00-0-M 6 2R928006756 2.0100 H20XL-A00-0-M 7 2R928006762 2.0100 H3XL-B00-0-M 6 2R928006763 2.0100 H6XL-B00-0-M 2 2R928006764 2.0100 H10XL-B00-0-M 7 2R928006806 2.0160 G25-A00-0-M 7 2R928006807 2.0160 H3XL-A00-0-M 3 2






ex works

Data sheet

168 R928006808 2.0160 H6XL-A00-0-M 3 2 51420R928006809 2.0160 H10XL-A00-0-M 6 2R928006810 2.0160 H20XL-A00-0-M 7 2R928006816 2.0160 H3XL-B00-0-M 7 2R928006817 2.0160 H6XL-B00-0-M 2 2R928006818 2.0160 H10XL-B00-0-M 6 2R928006860 2.0250 G25-A00-0-M 7 2R928006861 2.0250 H3XL-A00-0-M 4 2R928006862 2.0250 H6XL-A00-0-M 4 2R928006863 2.0250 H10XL-A00-0-M 6 2R928006864 2.0250 H20XL-A00-0-M 7 2R928006870 2.0250 H3XL-B00-0-M 7 2R928006871 2.0250 H6XL-B00-0-M 2 2R928006872 2.0250 H10XL-B00-0-M 7 2R928006915 2.0400 H3XL-A00-0-M 5 2R928006916 2.0400 H6XL-A00-0-M 4 2R928006917 2.0400 H10XL-A00-0-M 8 2R928006918 2.0400 H20XL-A00-0-M 4 2R928006924 2.0400 H3XL-B00-0-M 2 2R928006925 2.0400 H6XL-B00-0-M 2 2R928006926 2.0400 H10XL-B00-0-M 4 2R928006927 2.0400 H20XL-B00-0-M 4 2R928006969 2.0630 H3XL-A00-0-M 2 2R928006970 2.0630 H6XL-A00-0-M 3 2R928006971 2.0630 H10XL-A00-0-M 7 2R928006979 2.0630 H6XL-B00-0-M 2 2R928006980 2.0630 H10XL-B00-0-M 4 2R928007023 2.1000 H3XL-A00-0-M 2 2R928007024 2.1000 H6XL-A00-0-M 2 2R928007025 2.1000 H10XL-A00-0-M 4 2R928007034 2.1000 H10XL-B00-0-M 2 2R928019977 4.10 G25-A00-0-M 10 2R928022274 2.0130 H3XL-A00-0-M 2 2R928022275 2.0130 H6XL-A00-0-M 2 2R928022276 2.0130 H10XL-A00-0-M 2 2R928022283 2.0150 H3XL-A00-0-M 3 2R928022285 2.0150 H10XL-A00-0-M 5 2R928022312 2.0130 H10XL-B00-0-M 2 2R928022777 4.20 G100-A00-0-M 4 2R928027883 6.140 G100-S00-0-0 3 2R928040797 1.2000 H10XL-A00-0-M 2 2R928040800 1.2500 H10XL-A00-0-M 2 2R928041235 1.2000 H20XL-A00-0-M 2 2R928041237 1.2500 H20XL-A00-0-M 2 2R928046344 4.06 G60-A00-0-M 3 2

169 R928017073 9.30LA H20XL-A00-0-M SO3000 3 2 51457R928017074 9.30LA H10XL-A00-0-M SO3000 7 2R928017076 9.30LA H3XL-A00-0-M SO3000 6 2R928017086 9.30LA H10XL-F00-0-M SO3000 4 2






ex works

Data sheet

169 R928017087 9.30LA H6XL-F00-0-M SO3000 10 2 51457R928017110 9.60LA H20XL-A00-0-M SO3000 3 2R928017111 9.60LA H10XL-A00-0-M SO3000 12 2R928017112 9.60LA H6XL-A00-0-M SO3000 2 2R928017119 9.60LA H10XL-F00-0-M SO3000 5 2R928017120 9.60LA H6XL-F00-0-M SO3000 5 2R928017143 9.110LA H20XL-A00-0-M SO3000 3 2R928017144 9.110LA H10XL-A00-0-M SO3000 15 2R928017145 9.110LA H6XL-A00-0-M SO3000 2 2R928017152 9.110LA H10XL-F00-0-M SO3000 5 2R928017176 9.140LA H20XL-A00-0-M SO3000 3 2R928017177 9.140LA H10XL-A00-0-M SO3000 2 2R928017209 9.160LA H20XL-A00-0-M SO3000 3 2R928017210 9.160LA H10XL-A00-0-M SO3000 6 2R928017211 9.160LA H6XL-A00-0-M SO3000 3 2R928017218 9.160LA H10XL-F00-0-M SO3000 4 2R928017242 9.240LA H20XL-A00-0-M SO3000 3 2R928017243 9.240LA H10XL-A00-0-M SO3000 8 2R928017244 9.240LA H6XL-A00-0-M SO3000 4 2R928017251 9.240LA H10XL-F00-0-M SO3000 4 2R928017276 9.280LA H10XL-A00-0-M SO3000 3 2R928017308 9.330LA H20XL-A00-0-M SO3000 2 2R928017309 9.330LA H10XL-A00-0-M SO3000 6 2R928017310 9.330LA H6XL-A00-0-M SO3000 4 2R928017317 9.330LA H10XL-F00-0-M SO3000 4 2R928017375 9.500LA H10XL-A00-0-M SO3000 4 2R928017407 9.660LA H20XL-A00-0-M SO3000 4 2R928017408 9.660LA H10XL-A00-0-M SO3000 6 2R928017409 9.660LA H6XL-A00-0-M SO3000 3 2R928017416 9.660LA H10XL-F00-0-M SO3000 4 2R928017437 10.30LA H10XL-A00-6-M SO3000 3 2R928017460 10.60LA H10XL-A00-6-M SO3000 4 2R928017483 10.110LA H10XL-A00-6-M SO3000 5 2R928017505 10.160LA H20XL-A00-6-M SO3000 4 2R928017506 10.160LA H10XL-A00-6-M SO3000 4 2R928017528 10.240LA H20XL-A00-6-M SO3000 3 2R928017529 10.240LA H10XL-A00-6-M SO3000 6 2R928017551 10.330LA H20XL-A00-6-M SO3000 10 2R928017552 10.330LA H10XL-A00-6-M SO3000 6 2R928017553 10.330LA H6XL-A00-6-M SO3000 3 2R928017575 10.500LA H10XL-A00-6-M SO3000 3 2R928017597 10.660LA H20XL-A00-6-M SO3000 4 2R928017598 10.660LA H10XL-A00-6-M SO3000 10 2R928017599 10.660LA H6XL-A00-6-M SO3000 3 2R928017621 10.850LA H10XL-A00-6-M SO3000 3 2R928017644 10.950LA H10XL-A00-6-M SO3000 4 2R928017666 10.1300LA H20XL-A00-6-M SO3000 4 2R928017667 10.1300LA H10XL-A00-6-M SO3000 6 2R928017668 10.1300LA H6XL-A00-6-M SO3000 4 2






ex works

Data sheet

169 R928017669 10.1300LA H3XL-A00-6-M SO3000 5 2 51457R928017690 10.2600LA H10XL-A00-6-M SO3000 4 2R928019034 10.165LA H20XL-A00-6-M SO3000 2 2R928019035 10.165LA H10XL-A00-6-M SO3000 2 2R928019037 10.75LA H10XL-A00-6-M SO3000 3 2R928019880 10.1700LA H10XL-A00-6-M SO3000 2 2R928022419 9.60LA H10XL-F00-0-V SO3000 10 2R928022476 9.330LA H10XL-A00-0-V SO3000 4 2R928022585 10.2600LA H6XL-A00-0-M SO3000 2 2R928037731 10.2600LA H10XL-A00-0-M SO3000 2 2

170 R928016674 16.7500/R H6XL-S00-0-M 2 2 51464R928016676 16.7500/RH10XL-S00-0-M 3 2R928016679 16.7500/SH20XL-S00-0-M 2 2R928016717 16.8304/X H6XL-S00-0-M 4 2R928016804 16.8700/R H10XL-S00-0-M 6 2R928016950 16.9600/T H6XL-E00-0-M 3 2R928016953 16.9600/S H10XL-E00-0-M 1 2R928016954 16.9600/T H10XL-E00-0-M 2 2R928045422 16.6200/S H10XL-E00-0-M 2 2

171 R928018475 18.3105 H10XL-E00-0-M 4 2 51466R928018484 18.3205 H10XL-F00-0-M 5 2R928018495 18.3108 H10XL-E00-0-M 4 2R928018496 18.4108 H20XL-E00-0-M 4 2R928018515 18.3111 H10XL-E00-0-M 2 2R928018524 18.3211 H10XL-F00-0-M 3 2R928018535 18.3115 H10XL-E00-0-M 6 2R928018555 18.3130 H10XL-E00-0-M 4 2R928018575 18.3145 H10XL-E00-0-M 4 2R928018576 18.4145 H20XL-E00-0-M 8 2

172 R928025386 46.10Z02-S00-0-M 5 2 51470R928025387 46.10Z10-S00-0-M 5 2

173 R928005477 1.0005 H10XL-A00-0-M 4 2 51507R928005495 1.0008 H10XL-A00-0-M 3 2R928005549 1.0018 H10XL-A00-0-M 3 2R928005567 1.0020 H10XL-A00-0-M 3 2R928005604 1.0030 H20XL-A00-0-M 3 2R928005637 1.0045 H3XL-A00-0-M 3 2R928005639 1.0045 H10XL-A00-0-M 4 2R928006049 2.0004 G10-A00-0-M 5 2R928006050 2.0004 G25-A00-0-M 6 2R928006053 2.0004 H10XL-A00-0-M 6 2R928006080 2.0004 H10XL-A00-0-V 6 2R928006104 2.0005 G25-A00-0-M 4 2R928006107 2.0005 H10XL-A00-0-M 4 2R928006152 2.0005 H10XL-C00-0-V 5 2R928006161 2.0008 H10XL-A00-0-M 4 2R928006162 2.0008 H20XL-A00-0-M 3 2R928006212 2.0013 G25-A00-0-M 4 2R928006214 2.0013 H6XL-A00-0-M 5 2






ex works

Data sheet

173 R928006215 2.0013 H10XL-A00-0-M 4 2 51507R928006216 2.0013 H20XL-A00-0-M 4 2R928006269 2.0015 H10XL-A00-0-M 4 2R928006323 2.0018 H10XL-A00-0-M 4 2R928006374 2.0020 G25-A00-0-M 4 2R928006376 2.0020 H6XL-A00-0-M 1 2R928006377 2.0020 H10XL-A00-0-M 3 2R928006431 2.0030 H10XL-A00-0-M 4 2R928006432 2.0030 H20XL-A00-0-M 6 2R928006482 2.0045 G25-A00-0-M 5 2R928006485 2.0045 H10XL-A00-0-M 4 2R928007155 1.0018 P10-A00-0-M 7 2R928007211 2.0004 P10-A00-0-M 6 2R928007223 2.0008 P10-A00-0-M 7 2R928007933 2.0004 G25-AH0-0-V 4 2R928018916 2.0004 G40-A00-0-M 6 2R928018917 2.0004 G60-A00-0-M 6 2R928018919 2.0004 G100-A00-0-M 5 2R928018920 2.0005 G60-A00-0-M 6 2R928018921 2.0005 G100-A00-0-M 5 2R928018923 2.0008 G60-A00-0-M 4 2R928018925 2.0013 G40-A00-0-M 5 2R928018927 2.0013 G100-A00-0-M 5 2R928018931 2.0030 G40-A00-0-M 5 2R928018934 2.0045 G40-A00-0-M 4 2R928018942 2.56 G25-A00-0-M 4 2R928019031 2.90 H10XL-A00-0-M 5 2R928019063 2.10 G25-A00-0-M 4 2R928019065 2.10 P10-A00-0-M 10 2R928019137 2.32 P10-A00-0-M 15 2R928019473 2.32 G25-A00-0-M 6 2R928019553 2.0004 G100-A00-0-V 4 2R928019712 2.32 H10XL-C00-0-M 6 2R928019913 2.32 G60-A00-0-M 4 2R928019926 2.90 G40-A00-0-M 6 2R928022346 2.0040 G40-A00-0-M 7 2R928022605 2.56 G40-A00-0-M 4 2R928022606 2.140 G25-A00-0-M 6 2R928022695 2.32 G100-A00-0-M 5 2R928022876 2.18 G25-A00-0-M 6 2R928023910 2.225 G25-A00-0-M 6 2R928023991 2.56 H10XL-A00-0-M 5 2R928025229 2.56 G100-A00-0-M 5 2R928025500 2.90 H10XL-C00-0-M 6 2R928025591 2.Z180 H10XL-C00-0-V 7 2R928045963 2.360 G25-C00-0-M 2 2R928046064 2.90 G25-A00-0-M 5 2R928046714 2.140 G40-A00-0-M 7 2R928046752 3.0003 P25-A00-7-M 3 2






ex works

Data sheet

Filter accessories174 R901025310 WO-S01-2,2-M-10 4 2 51450

R901025313 WO-D01-5,0-M-450 4 2R928028409 WE-1SP-M12X1 10 2R928028410 WE-2SP-M12X1 10 2R928028411 WE-2SPSU-M12X1 7 2R928036318 WE-1SP-EN175301-803 7 2

Bosch Rexroth AGZum Eisengießer 197816 Lohr, GermanyPhone: +49(0)9352/18-0Fax: +49(0)9352/[email protected]

Find your local contact at:www.boschrexroth.com/contact

More information:www.boschrexroth.com/goto

Document no.: RE 01500 Material no.: R999000261Version no.: 2016-04© Bosch Rexroth AG 2016Subject to alterations!

The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.

GoTo Europe Focused Delivery Program - Bosch Global · Bosch Rexroth AG, RE 01500, 2016-04 4 GoTo...

Documents

Transcript of GoTo Europe Focused Delivery Program - Bosch Global · Bosch Rexroth AG, RE 01500, 2016-04 4 GoTo...