49

▪ Up to 30,000 lbs. GTW / 7,500 lbs. vertical load ▪ Stronger safety chain loops - 5/8" instead of 1/2" ▪ Grade 8 hardware ▪ Fortified center section and kit designs ▪ Limited Lifetime Warranty

Flip-Over Ball ▪ EZr ball storage helps avoid trailer ball loss ▪ Truck bed is free of obstruction when flipped down ▪ Attractive, chrome-plated trim ring, rubber trim

piece and cover make for a finished look ▪ Rubber cover included

Sturdy Reversible Handle ▪ Heavy duty handle, with comfort grip, will not bend ▪ Can be positioned on either side of the truck

Double Lock Security ▪ Double-locking pins for peace of mind

11-16 Chevrolet / GMC CT 6061101-10 Chevrolet / GMC CT 6060911-13 Dodge Ram CT 6061210-16 Ford CT 60612

UNDER-BED DOUBLE LOCK EZr GOOSENECK HITCH

Exclusive center locator

To create a pilot hole...

Simply drill up from under the bed...

For worry-free truck-bed drilling

EASY TO INSTALL - CURT Exclusive Center Locator Installation Tool ▪ Eliminates the need to measure where the ball hole should be in the truck bed ▪ Eliminates errors caused by drilling ▪ Indicates when to stop drilling the ball hole in the top of the

bed - you’ll see orange shavings ▪ Pulls out through the ball hole and is discarded ▪ Included with all Double Lock EZr goosenecks

EZr INSTALLATION KITS11-18 Silverado/Sierra 2500/3500 HD CT 6062406-13 Ram 2500/3500 CT 6066011-16 F-250/F-350 Super Duty CT 60645

EZr INSTALLATION KITS ▪ Designed for faster, easier installation ▪ No need to lower exhaust on Ford, Chevy or most Dodge trucks ▪ No need to relocate cable hanger and ground wire on Dodge trucks ▪ Uses carriage bolts when possible so only one wrench is needed ▪ Eliminates the need to cut sheet metal along inside of fender to insert rails ▪ Drill safety chain loop holes

from underside of truck bed, no measuring required

▪ Can be installed by one person

See page 130 for MUD FLAPS

B&W TURNOVERBALL™ - GOOSENECK HITCHCONVERTS TO A LEVEL BED IN SECONDS ▪ 30,000 lb. GTW / 7,500 lb. VTW

▪ Solid, machined 2-5/16" ball ▪ Durable powder-coat finish ▪ Only a 4" hole in the bed ▪ Bolts to existing holes in the frame with no drilling or welding ▪ Solid, one-piece machined receiver socket ▪ Flexible latch pin handle attached to a spring loaded, 5/8"

steel locking pin that goes completely through the ball ▪ Limited Lifetime WarrantyRemove Ball Turn Ball Over Replace Ball In Socket

Turnoverball™ AccessoriesKingpin BNWGNXA40004" Extender (20,000 lb. GTW / 5,000 lb. VTW) BNWGNXA4085

Eyelet BNWGNXA4075Inverted Ball BNWGNXA40252-5/16" Replacement Ball BNWGNXA20003" Ball BNWGNXA2025Hi-Rise Ball (1" taller than standard ball) BNWGNXA2050

A hitch when you need it...a level bed when you don’t.

GO

OS

EN

EC

K H

ITCH

ES

Proudly Made inthe USA

4" Hole Saw P/N BNWGNASH0400

4" Hole Saw P/N BNWGNASH0400

* Mounting Kit has a shallow receiver socket and requires a special post (part # BNWRVP3521) when using the BNWRVK3500 Companion Fifth Wheel Hitch** Uses 3-1/2” Hole Saw

CHEVY/GMC07-18 Silverado/Sierra 1500 6 ft. 6 in. Bed with Boxed Frame BNWGNRK105707-18 Silverado/Sierra 1500 8 ft. Bed with Boxed Frame BNWGNRK100716-18 Silverado/Sierra 2500/3500 BNWGNRK101611-15 Silverado/Sierra 2500/3500 BNWGNRK101201-10 Silverado/Sierra 2500 BNWGNRK106707-10 Silverado/Sierra 3500 (w/ 1 bed cross member over the axle) BNWGNRK1067DODGE/RAM09-18 Ram 1500 BNWGNRK1309*13-18 Ram 3500** BNWGNRK131414-18 Ram 2500 BNWGNRK138410-13 Ram 2500/3500 Diesel Trucks (13 2500 Only) BNWGNRK131303-09 Ram 2500/3500 Gas or Diesel Trucks BNWGNRK131310-13 Ram 2500/3500 Gas Engine Trucks (13 2500 Only) BNWGNRK130806-13 Ram 1500/2500/3500 Mega-Cab Trucks (13 2500 Only) BNWGNRK1308FORD15-18 Ford F-150 BNWGNRK111504-14 Ford F-150 BNWGNRK110417-18 F-250/F-350 Super Duty 4WD BNWGNRK111717-18 F-250/F-350 Super Duty 2WD BNWGNRK111611-16 F-250/F-350 Super Duty, F-450 w/ factory installed bed BNWGNRK111199-10 F-250/F-350 Super Duty (08-10 F-450 w/ factory installed bed) BNWGNRK110808-10 F-450 with factory installed bed BNWGNRK1108TOYOTA07-16 Toyota Tundra All Beds BNWGNRK1257*

50

**Must purchase Install Kit & Hitch separately**

INSTALL KIT FORCHEVY/GMC CT 60607 CT 6105207-18 Silverado/Sierra 1500 (60615) CT 60632 CT 6133199-06 Silverado/Sierra 1500/2500 LD CT 60652 CT 6134111-16 Silverado/Sierra 2500/3500 HD CT 60604 CT 6130101-10 Silverado/Sierra 2500/3500 HD Classic CT 60652 CT 61341DODGE/RAM CT 60607 CT 6105209-18 Ram 1500 (Excluding Air Suspension) CT 60657 -02-08 Ram 1500 CT 60659 CT 6131903-13 Ram 2500/3500 CT 60661 CT 61529FORD CT 60607 CT 6105215-18 F-150 CT 60649 -04-14 F-150 CT 60641 CT 6132199-15 F-250/F-350 Super Duty CT 60644 CT 61332

**See below for the proper installation kit for your application.

▪ Up to 30,000 lbs. GTW / 7,500 lbs. vertical load ▪ Flip-and-store ball helps avoid trailer ball loss and keeps truck bed free of obstruction ▪ Heavy duty handle can be positioned on either side of the vehicle ▪ Double-locking pins in trailer ball provides peace of mind ▪ Removable, chrome 2-5/16" trailer ball ▪ Chrome trim ring provides a finished look ▪ Spring-loaded safety chain loops and grade 8 hardware included ▪ Durable carbide powder coat finish ▪ Limited Lifetime Warranty

UNDER BED DOUBLE-LOCK GOOSENECK

P/N Make / Model Ball Size GTW / Vertical LoadCT 60607 Fits most application 2-5/16" 30,000 / 7,500 lbs.CT 60615 07-18 Chevy/GMC 1500 2-5/16" 30,000 / 7,500 lbs.

CT 60607

▪ Factory-style gooseneck trailer ball for quick and easy removal ▪ Quickly bolts in from underneath the truck bed in 45 minutes or less ▪ Includes heavy duty, 5/8" safety chain loops

RAM 2500 & 3500 GOOSENECK HITCHES

CT 60613

P/N Make / Model GTW / Vertical LoadCT 60613 13-18 Ram 3500 30,000 / 7,500 lbs.CT 60614 14-18 Ram 2500 30,000 / 7,500 lbs.

Requires no additional hardware or

installation kits

**See below for the proper installation kit for your application.

▪ Up to 30,000 lbs. GTW / 7,500 lbs. vertical load ▪ Permanently attached trailer ball folds down and out of the way, eliminating theft or loss ▪ T-handle for easy use ▪ Spring loaded safety chain loops and grade 8 hardware included ▪ Limited Lifetime Warranty

OVER-BED FOLDING BALL GOOSENECK HITCH

P/N Ball Size GTW / Vertical LoadCT 61052 2-5/16" 30,000 / 7,500 lbs.

GO

OS

EN

EC

K H

ITC

HE

S

Requires no additional hardware or installation kits

▪ Weight ratings are limited to vehicle manufacturer’s stated capacities ▪ Easy, one-person installation requires no lowering of exhaust or spare tire ▪ No drilling necessary except the truck bed holes ▪ Installation also requires no welding, bed flange trimming or bed removal ▪ Included patented 2 5/16" ball eliminates the need for a side handle ▪ Heavy-duty 5/8" safety chain loops for a reliable connection ▪ Tested for safety in accordance with SAE J2638 ▪ Protected by a highly durable, rust-resistant, liquid A-coat ▪ Limited Lifetime Warranty

OEM-STYLE GOOSENECK HITCH FOR FORD

productnewP/N Make / Model GTW / Vertical LoadCT 60700 2017 F-250/F-350 Super Duty 30,000 / 7,500 lbs.

51

4" OFFSET BALLP/N CT 60602

Rated for 20,000 lb.

HIGH RISE BALLP/N CT 60603

Rated for 30,000 lb.

DOUBLE-LOCK GOOSENECK BALLS

▪ 20,000 lb. rated cushioned 360° ▪ Safety chains standard ▪ Fail safe king pin adapter

CUSHIONED 5TH WHEEL TO GOOSENECK ADAPTERP/N CV C5G - Convert-A-Ball®

OEM-COMPATIBLE GOOSENECK BALL & SAFETY CHAIN ANCHOR KITIncludes Safety Chain Anchors, Gooseneck Ball, Rubber Hole Cover, Durable Storage Case

CT 60618 CT 60692

P/N Make Ball GTW / Vertical Load Ball Size CT 60618 Ram 30,000 / 7,500 lbs. 2 5/16" CT 60692 Chevy / GMC 30,000 / 7,500 lbs. 2 5/16"

CT 60617 CT 60601

OEM-COMPATIBLE GOOSENECK BALLS & SAFETY CHAIN ANCHORSP/N Make Ball Size DescriptionCT 60617 Ram - Safety chain anchorsCT 60691 Chevy / GMC - Safety chain anchorsCT 60601 Ford & Ram 2 5/16" OEM-compatible gooseneck ballCT 60629 Chevy/ GMC 2 5/16" OEM-compatible gooseneck ball

CT 56071

CT 56070

FIFTH WHEEL/GOOSENECK HITCH ADAPTER HARNESSESCHEVY/GMC 7' Harness 10' Harness99-15 Silverado/Sierra w/ or w/o Factory 7-Way CT 56070 CT 56000DODGE/RAM 7' Harness 10' Harness09-18 Ram 1500 w/ Round Factory 7-Way (09 1500 only) CT 56070 CT 5600095-08 Ram w/ Square Factory 7-Way CT 56071 CT 56001FORD 7' Harness 10' Harness97-18 F-150 w/ or w/o Factory 7-Way CT 56070 CT 5600099-18 F-250/F-350 Super Duty w/ Factory 7-Way CT 56070 CT 56000

FIFTH W

HE

EL / G

OO

SE

NE

CK

HITC

HE

S

▪ Adapts to CT 16210 and CT 16310 series Goosenecks to fifth wheel rails

▪ For use with Curt 16K & 20K fifth wheels ▪ Also accepts competitive fifth wheel hitches up to 20K

X-5 FIFTH WHEEL ADAPTER PLATES

GOOSENECK BENT PLATEP/N CT 16055

P/N CT 16210 Adapts CURT Double-Lock goosenecks to

5th wheel rails

P/N CT 16310 Adapts B&W Turnover

Ball goosenecks to 5th wheel rails

20,000 lb. GTW

25K GOOSENECK SPYDERP/N CT 16085 ▪ 25,000 lbs. GTW ▪ Mounts to all standard fifth wheel rails ▪ 4 pin install & removal for access to truck bed ▪ Carbide powder coat finish ▪ 2-5/16" welded ball, safety chain hook-ups, & pins & clips included ▪ Centered ball

▪ 25,000 lbs. GTW ▪ Mounts to all standard fifth wheel rails ▪ Pin & clip included ▪ Easy 4 locking pin installation & removal allows

full access to truck bed ▪ 2-5/16" trailer ball included ▪ Off-set ball

▪ Locks with padlock ▪ Fully adjustable from 12" to 16" ▪ Tongue weight 4,000 lb.

Use with CT 16204 Fifth Wheel Base Rails CT 16204

CUSTOM FIFTH WHEEL BRACKET KITS

Cuts install time in half!

11-18 Silverado/Sierra 2500/3500 HD CT 1641114-18 Ram 2500 w/o Prep Package CT 1642703-12 Ram 2500/3500 CT 1642017-18 F-250/F-350 Super Duty CT 1642811-15 F-250/F-350 Super Duty CT 16424

FIFTH WHEEL BASE RAILSTwo 5th wheel base rails with 16101 universal brackets CT 16200

Two 5th wheel base rails only CT 16204