Gns3 and Physical Switches – Breakout Switch _ Ccie Blog _ Ipexpert

download Gns3 and Physical Switches – Breakout Switch _ Ccie Blog _ Ipexpert

of 15

Transcript of Gns3 and Physical Switches – Breakout Switch _ Ccie Blog _ Ipexpert

  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    1/15

    autostart = False

    [localhost:7200]

    workingdir = /tmp

    udp = 10000

    [[3725]]

    image = /home/foo/GNS3/images/c3725-advipservicesk9-mz.124-15.T14-uncompressed.bin

    ram = 256

    ghostios = True

    sparsemem = True

    [[ROUTER R1]]

    model = 3725

    console = 2001

    f0/0 = R3 f1/1

    x = -362.0

    y = -214.0

    [[ROUTER R2]]

    model = 3725

    console = 2002

    f0/0 = R3 f1/2

    x = -119.0

    y = -214.0

    [[ROUTER R3]]

    model = 3725

    console = 2003 f1/1 = R1 f0/0

    f1/2 = R2 f0/0

    slot1 = NM-16ESW

    x = -240.0

    y = -17.0

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    5 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    2/15

    sudo apt-get install vlan

    sudo modprobe 8021q

    sudo sh -c 'grep -q 8021q /etc/modules || echo 8021q >> /etc/modules'

    sudo ifconfig eth1 mtu 1536

    /sbin/ifconfig eth1 mtu 1536 to your /etc/rc.local

    OR

    mtu 1536 to your eth1 interface under /etc/network/interfaces

    autostart = False

    [localhost:7200]

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    5 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    3/15

    workingdir = /tmp

    udp = 10000

    [[3725]]

    image = /home/foo/GNS3/images/c3725-advipservicesk9-mz.124-15.T14-uncompressed.bin

    ram = 256

    ghostios = True

    sparsemem = True

    [[ETHSW SW0]]

    1 = access 101

    ! READ AS PORT 1 IS AN ACCESS PORT. VLAN 101

    2 = access 102

    ! READ AS PORT 2 IS AN ACCESS PORT. VLAN 102

    99 = dot1q 1 nio_linux_eth:eth1

    ! READ AS PORT 99 IS A TRUNK. ITS NATIVE VLAN IS VLAN 1. IT CONNECTS TO HOST

    ! ETH1 VIA A NIO_LINUX_ETH VIRTUAL/PHYSICAL ADAPTER

    x = -234.5

    y = -47.0

    hx = 12.0

    hy = -35.0

    [[ROUTER R1]]

    model = 3725

    console = 2001

    f0/0 = SW0 1

    ! READ AS F0/0 CONNECTS TO SW0 PORT 1

    x = -362.0

    y = -214.0

    [[ROUTER R2]]

    model = 3725

    console = 2002

    f0/0 = SW0 2

    x = -119.0

    y = -214.0

    [GNS3-DATA]

    ! BELOW IS STRICTLY FOR GNS3 FOR VISUAL PURPOSES

    [[Cloud C0]]

    ! MAKE ME A PRETTY CLOUD AND CALL IT C0

    x = -274.5

    y = 100.0

    hx = 48.5

    hy = -24.0

    connections = SW0:99:nio_linux_eth:eth1

    ! THAT CLOUD WILL BIND SW0 PORT 99 TO HOST ETH1

    hostname BREAKOUT-SWITCH-1

    !

    system mtu routing 1546

    vtp mode transparent

    !

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    5 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    4/15

    !

    vlan 101-102

    !

    !

    interface FastEthernet1/0/1

    description UP TO UBUNTU HOST

    switchport trunk encapsulation dot1q

    switchport trunk allowed vlan 101-102

    switchport mode trunk

    l2protocol-tunnel cdp

    l2protocol-tunnel stp

    l2protocol-tunnel vtp

    no cdp enable

    spanning-tree portfast

    !

    interface FastEthernet1/0/13

    description DOWN TO LAB-SWITCH-1 (gi0/13)

    switchport access vlan 101

    switchport mode dot1q-tunnel

    l2protocol-tunnel cdp

    l2protocol-tunnel stp

    l2protocol-tunnel vtp

    no cdp enable

    spanning-tree portfast

    !

    interface FastEthernet1/0/14

    description DOWN TO LAB-SWITCH-1 (gi0/14)

    switchport access vlan 102

    switchport mode dot1q-tunnel

    l2protocol-tunnel cdp

    l2protocol-tunnel stp

    l2protocol-tunnel vtp

    no cdp enable

    spanning-tree portfast

    R1#sho debug

    CDP:

    CDP packet info debugging is on

    CDP events debugging is on

    CDP neighbor info debugging is on

    CDP IP info debugging is on

    R1#

    *Mar 1 00:33:27.839: CDP-IP: Cannot find stub network

    *Mar 1 00:33:27.839: CDP-PA: version 2 packet sent out on FastEthernet0/0

    *Mar 1 00:33:34.235: CDP-PA: Packet received from LAB-SWITCH-1 on interface FastEthernet0/0

    *Mar 1 00:33:34.239: **Entry NOT found in cache**

    *Mar 1 00:33:34.239: CDP-EV: Lookup for ip phone with idb= FastEthernet0/0 ip= 1.1.1.2

    mac= 0019.06a8.b1c1 platform= cisco WS-C3560G-24TS

    R1#

    R1#

    R1#sho cdp ne

    Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge

    S - Switch, H - Host, I - IGMP, r - Repeater

    Device ID Local Intrfce Holdtme Capability Platform Port ID

    LAB-SWITCH-1 Fas 0/0 141 S I WS-C3560G Gig 0/13

    R1#

    Router-FE |

    Host-GE

    |

    BreakSW-FE

    |

    Lab-SW1-GE

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    5 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    5/15

    autostart = False

    [localhost:7200]

    workingdir = /home/foo/GNS3/working

    udp = 10000

    [[7200]]

    image = /home/foo/GNS3/images/c7200-jk9o3s-mz.124-25-uncompressed.bin

    idlepc = 0x60678af0

    ghostios = True

    sparsemem = True

    [[3640]]

    chassis = 3640

    disk0 = 32

    image = /home/foo/GNS3/images/c3640-jk9s-mz.124-13a-uncompressed.bin

    ram = 256

    ghostios = True

    sparsemem = True

    idlepc = 0x607a012c

    [[ROUTER R1]]

    console = 2001

    x = -599.040764008

    y = -249.61731573

    [[ROUTER R2]]

    console = 2002

    slot1 = PA-4T+

    slot2 = PA-4T+

    s1/0 = FRSW 2

    s2/0 = R5 s2/0

    x = -594.586355052

    y = 166.881377145

    [[ROUTER R4]]

    console = 2004

    slot0 = PA-4T+

    s0/0 = FRSW 4

    x = -599.326980614

    y = -67.5875676485

    [[ROUTER R5]]

    console = 2005

    slot1 = PA-4T+

    slot2 = PA-4T+

    s1/0 = FRSW 5

    s2/0 = R2 s2/0

    x = -413.582473102

    y = 168.527112893

    [[ROUTER R6]]

    console = 2006

    slot1 = PA-4T+

    slot2 = PA-4T+

    s1/0 = FRSW 6

    s2/0 = R9 s2/0

    s2/1 = R9 s2/1

    x = -411.475729945

    y = -58.4042176954

    [[ROUTER R7]]

    console = 2007

    slot0 = PA-4T+

    s0/0 = R8 s0/0

    x = 99.8068941512

    y = -143.60076707

    [[ROUTER R8]]

    console = 2008

    slot0 = PA-4T+

    s0/0 = R7 s0/0

    x = 99.9323601145

    y = 40.3514410148

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    5 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    6/15

    [[ROUTER R9]]

    console = 2009

    slot2 = PA-4T+

    s2/0 = R6 s2/0

    s2/1 = R6 s2/1

    x = -410.810872155

    y = -242.328637006

    [[ROUTER BB1]]

    model = 3640

    console = 2011

    slot0 = NM-4E

    x = -165.043722602

    y = -158.154328933

    [[ROUTER BB2]]

    model = 3640

    console = 2012

    slot0 = NM-4E

    x = -160.81412458

    y = -40.6010542815

    [[ROUTER BB3]]

    model = 3640

    console = 2013

    slot0 = NM-4E

    x = -155.040421025

    y = 94.9776619695

    [[FRSW FRSW]]

    2:204 = 4:402

    2:205 = 5:502

    2:206 = 6:602

    2:214 = 4:412

    2:215 = 5:512

    2:216 = 6:612

    2:224 = 4:422

    2:225 = 5:522

    2:226 = 6:622

    4:402 = 2:204

    4:405 = 5:504

    4:406 = 6:604

    4:412 = 2:214

    4:415 = 5:514

    4:416 = 6:614

    4:422 = 2:224

    4:425 = 5:524

    4:426 = 6:624

    5:502 = 2:205

    5:504 = 4:405

    5:506 = 6:605

    5:512 = 2:215

    5:514 = 4:415

    5:516 = 6:615

    5:522 = 2:225

    5:524 = 4:425

    5:526 = 6:625

    6:602 = 2:206

    6:604 = 4:406 6:605 = 5:506

    6:612 = 2:216

    6:614 = 4:416

    6:615 = 5:516

    6:622 = 2:226

    6:624 = 4:426

    6:625 = 5:526

    x = -498.492430622

    y = 56.7107926745

    [GNS3-DATA]

    workdir = ../working

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    5 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    7/15

    R1 0/0 v102 port 2

    R1 0/1 v103 port 3

    R2 0/0 v104 port 4

    R2 0/1 v105 port 5

    R4 0/0 v106 port 6

    R4 0/1 v107 port 7

    R5 0/0 v108 port 8

    R5 0/1 v109 port 9

    R6 0/0 v110 port 10

    R6 0/1 v111 port 11

    R7 0/0 v112 port 12

    R7 0/1 v113 port 13

    R8 0/0 v114 port 14

    R8 0/1 v115 port 15

    R9 0/0 v116 port 16

    R9 0/1 v117 port 17

    BB1 0/0 v 118 port 18

    BB2 0/0 v119 port 19

    BB3 0/0 v120 port 20

    [[ETHSW SW0]]

    2 = access 102

    3= access 103

    4= access 104

    5= access 105

    6= access 106

    7= access 107

    8= access 108

    9= access 109

    10= access 110

    11= access 111

    12= access 112

    13= access 113

    14= access 114

    15= access 11516= access 116

    17= access 117

    18= access 118

    19= access 119

    20= access 120

    99 = dot1q 1 nio_linux_eth:eth1

    autostart = False

    [localhost:7200]

    workingdir = /home/foo/GNS3/working

    udp = 10000

    [[7200]]

    image = /home/foo/GNS3/images/c7200-jk9o3s-mz.124-25-uncompressed.bin

    idlepc = 0x60678af0

    ghostios = True

    sparsemem = True

    [[3640]]

    chassis = 3640

    disk0 = 32

    image = /home/foo/GNS3/images/c3640-jk9s-mz.124-13a-uncompressed.bin

    ram = 256

    ghostios = True

    sparsemem = True

    idlepc = 0x607a012c

    [[ROUTER R1]]

    console = 2001

    f0/0 = SW0 2

    f0/1 = SW0 3

    x = -599.040764008

    y = -249.61731573

    [[ROUTER R2]]

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    5 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    8/15

    console = 2002

    f0/0 = SW0 4

    ! SEND ALL TRAFFIC FROM Fa0/0 TO PORT 4 ON THE VSWITCH. R2 KNOWS NOTHING OF ANY

    ! VLANS OR TAGGING.

    f0/1 = SW0 5

    slot1 = PA-4T+

    slot2 = PA-4T+

    s1/0 = FRSW 2

    s2/0 = R5 s2/0

    x = -594.586355052

    y = 166.881377145

    [[ROUTER R4]]

    console = 2004

    f0/0 = SW0 6

    f0/1 = SW0 7

    slot0 = PA-4T+

    s0/0 = FRSW 4

    x = -599.326980614

    y = -67.5875676485

    [[ROUTER R5]]

    console = 2005

    f0/0 = SW0 8

    f0/1 = SW0 9

    slot1 = PA-4T+

    slot2 = PA-4T+

    s1/0 = FRSW 5

    s2/0 = R2 s2/0

    x = -413.582473102

    y = 168.527112893

    [[ROUTER R6]]

    console = 2006

    f0/0 = SW0 10

    f0/1 = SW0 11

    slot1 = PA-4T+

    slot2 = PA-4T+

    s1/0 = FRSW 6

    s2/0 = R9 s2/0

    s2/1 = R9 s2/1

    x = -411.475729945

    y = -58.4042176954

    [[ROUTER R7]]

    console = 2007

    f0/0 = SW0 12

    f0/1 = SW0 13

    slot0 = PA-4T+

    s0/0 = R08 s0/0

    x = 99.8068941512

    y = -143.60076707

    [[ROUTER R8]]

    console = 2008

    f0/0 = SW0 14

    f0/1 = SW0 15

    slot0 = PA-4T+

    s0/0 = R7 s0/0

    x = 99.9323601145 y = 40.3514410148

    [[ROUTER R9]]

    console = 2009

    f0/0 = SW0 16

    f0/1 = SW0 17

    slot2 = PA-4T+

    s2/0 = R6 s2/0

    s2/1 = R6 s2/1

    x = -410.810872155

    y = -242.328637006

    [[ROUTER BB1]]

    model = 3640

    console = 2011

    slot0 = NM-4E

    f0/0 = SW0 18

    x = -165.043722602

    y = -158.154328933

    [[ROUTER BB2]]

    model = 3640

    console = 2012 slot0 = NM-4E

    f0/0 = SW0 19

    x = -160.81412458

    y = -40.6010542815

    [[ROUTER BB3]]

    model = 3640

    console = 2013

    slot0 = NM-4E

    f0/0 = SW0 20

    x = -155.040421025

    y = 94.9776619695

    [[ETHSW SW0]]

    1 = access 101

    2 = access 102

    3 = access 103

    4 = access 104

    ! ON THE VSWITCH, THE CONNECTION IS RECEIVED AND A TAG IS APPLIED

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    5 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    9/15

    5 = access 105

    6 = access 106

    7 = access 107

    8 = access 108

    9 = access 109

    10 = access 110

    11 = access 111

    12 = access 112

    13 = access 113

    14 = access 114

    15 = access 115

    16 = access 116

    17 = access 117

    18 = access 118

    19 = access 119

    20 = access 120

    99 = dot1q 1 nio_linux_eth:eth1

    ! THAT TAGGED TRAFFIC IS DUMPED TO THIS TRUNK PORT, THEN FED TO HOST ETH1,

    ! THEN OFF TO YOUR BREAKOUT SWITCH WITH THE TAG STILL APPLIED.

    x = -246.5

    y = -269.0

    [[FRSW FRSW]]

    2:204 = 4:402

    2:205 = 5:502

    2:206 = 6:602

    2:214 = 4:412

    2:215 = 5:512

    2:216 = 6:612

    2:224 = 4:422

    2:225 = 5:522

    2:226 = 6:622

    4:402 = 2:204

    4:405 = 5:504

    4:406 = 6:604

    4:412 = 2:214

    4:415 = 5:514

    4:416 = 6:614

    4:422 = 2:224

    4:425 = 5:524

    4:426 = 6:624

    5:502 = 2:205

    5:504 = 4:405

    5:506 = 6:605

    5:512 = 2:215

    5:514 = 4:415

    5:516 = 6:615

    5:522 = 2:225

    5:524 = 4:425

    5:526 = 6:625

    6:602 = 2:206

    6:604 = 4:406

    6:605 = 5:506

    6:612 = 2:216

    6:614 = 4:416

    6:615 = 5:516 6:622 = 2:226

    6:624 = 4:426

    6:625 = 5:526

    x = -498.492430622

    y = 56.7107926745

    [GNS3-DATA]

    workdir = ../working

    [[Cloud C0]]

    x = -54.5

    y = -285.0

    connections = SW0:99:nio_linux_eth:eth1

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    5 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    10/15

    !

    hostname BREAKOUT-SWITCH-1

    !

    system mtu routing 1546

    vtp mode transparent

    !

    !

    vlan 102-120

    !

    !

    interface FastEthernet1/0/1

    description UP TO UBUNTU HOST

    switchport trunk encapsulation dot1q

    switchport trunk allowed vlan 102-120

    ! ALL THE TAGGED FRAMES ARE RECEIVED HERE AND PROCESSED PROPERLY ACCORDING TO THE CONFIG

    switchport mode trunk

    l2protocol-tunnel cdp

    l2protocol-tunnel stp

    l2protocol-tunnel vtp

    no cdp enable

    spanning-tree portfast

    no shut

    !

    interface range fa1/0/2 21

    no cdp enable

    spanning-tree portfast

    l2protocol-tunnel cdpl2protocol-tunnel stp

    l2protocol-tunnel vtp

    switchport mode dot1q-tunnel

    no shut

    !

    interface FastEthernet1/0/2

    description GNS3-R1-Fa0/0 To Physical Switch Cat1-Fa0/1

    switchport access vlan 102

    ! THE VLAN TAG IS STRIPPED HERE BEFORE BEING DUMPED TO THE DOWNSTREAM

    ! LAB SWITCH. SO THE LAB SWITCH NEVER SEES ANYTHING ODD!

    !

    interface FastEthernet1/0/3

    description GNS3-R1-Fa0/1 To Physical Switch Cat2-Fa0/1

    switchport access vlan 103

    !

    interface FastEthernet1/0/4

    description GNS3-R2-Fa0/0 To Physical Switch Cat1-Fa0/2

    switchport access vlan 104

    !

    interface FastEthernet1/0/5description GNS3-R2-Fa0/1 To Physical Switch Cat2-Fa0/2

    switchport access vlan 105

    !

    interface FastEthernet1/0/6

    description GNS3-R4-Fa0/0 To Physical Switch Cat1-Fa0/4

    switchport access vlan 106

    !

    interface FastEthernet1/0/7

    description GNS3-R4-Fa0/1 To Physical Switch Cat3-Fa0/4

    switchport access vlan 107

    !

    interface FastEthernet1/0/8

    description GNS3-R5-Fa0/0 To Physical Switch Cat1-Fa0/5

    switchport access vlan 108

    !

    interface FastEthernet1/0/9

    description GNS3-R5-Fa0/1 To Physical Switch Cat3-Fa0/5

    switchport access vlan 109

    !

    interface FastEthernet1/0/10

    description GNS3-R6-Fa0/0 To Physical Switch Cat2-Fa0/6

    switchport access vlan 110

    !

    interface FastEthernet1/0/11

    description GNS3-R6-Fa0/1 To Physical Switch Cat4-Fa0/6

    switchport access vlan 111

    !

    interface FastEthernet1/0/12

    description GNS3-R7-Fa0/0 To Physical Switch Cat2-Fa0/7

    switchport access vlan 112

    !

    interface FastEthernet1/0/13

    description GNS3-R7-Fa0/1 To Physical Switch Cat4-Fa0/7

    switchport access vlan 113

    !

    interface FastEthernet1/0/14

    description GNS3-R8-Fa0/0 To Physical Switch Cat2-Fa0/8

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    15 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    11/15

    switchport access vlan 114

    !

    interface FastEthernet1/0/15

    description GNS3-R8-Fa0/1 To Physical Switch Cat4-Fa0/8

    switchport access vlan 115

    !

    interface FastEthernet1/0/16

    description GNS3-R9-Fa0/0 To Physical Switch Cat2-Fa0/9

    switchport access vlan 116

    !

    interface FastEthernet1/0/17

    description GNS3-R9-Fa0/1 To Physical Switch Cat4-Fa0/9

    switchport access vlan 117

    !

    interface FastEthernet1/0/18

    description GNS3-BB1-E0/0 To Physical Switch Cat1-Fa0/11

    switchport access vlan 118

    !

    interface FastEthernet1/0/19

    description GNS3-BB2-E0/0 To Physical Switch Cat2-Fa0/12

    switchport access vlan 119

    !

    interface FastEthernet1/0/20

    description GNS3-BB3-E0/0 To Physical Switch Cat2-Fa0/13

    switchport access vlan 120

    !

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    15 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    12/15

    Tweet 0 0LikeLike

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    15 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    13/15

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    15 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    14/15

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    15 5/26/2015 1

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/
  • 7/24/2019 Gns3 and Physical Switches Breakout Switch _ Ccie Blog _ Ipexpert

    15/15

    3 AND PHYSICAL SWITCHES Breakout Switch | CCIE Blog | ... http://blog.ipexpert.com/gns3-and-physical-switches-breakou

    http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/http://blog.ipexpert.com/gns3-and-physical-switches-breakout-switch/