GMA Garnet™ · Removal of light-medium coatings and/or rust. • Efficiently produces surface...
2
A full range of garnet abrasives for any surface preparaon requirement from removing resistant coangs and heavy rust to polishing glass and delicate restoraon work. GMA Garnet™ is approved by major paint manufacturers, preferred by major oil companies, shipyards and internaonal fabricators and is available through an extensive global network. GMA Garnet™ Blasng Abrasives gmagarnet.com ASIA PACIFIC | AMERICAS | EUROPE | MIDDLE EAST ExtremeBlast Performance Applicaon Our coarsest grade for the toughest jobs. Removal of resistant specialist coangs, heavy liners and marine foulings. Ideal on high build coangs of 30 + mils. • Uniform surface profile of 3.5 - 4.5 mil (90 - 115 μm) with exceponally clean surface, enabling remarkable bonding of specialist coangs. • Blasng rates : Up to 260 ſt 2 /hr. • Consumpon rate : As low as 2 lb/ſt 2 . Ideal for TSA preparaon, coangs for extreme condions, preparing crical components. Removal of high build coangs, pliable and flexible coangs including coal tar, inner liners and some marine coangs. Offshore plaorm decking, tanks, piping, pressure vessels, ship hulls and ballast tanks. ToughBlast Performance Applicaon Our engineered blend for superior cleaning on tough jobs. Fast removal of high build up coangs and/or heavy rust. • Uniform surface profile from 3.0 - 4.0 mil (75 - 100 μm) with ideal surface cleanliness for unmatched adhesion. • Blasng rates: Up to 360 ſt 2 /hr. • Consumpon rate: As low as 1.5 lb/ſt 2 . High performance ‘all-around’ garnet abrasive. Heavy industrial maintenance. Great on 2 coat systems, 3 coat systems and thick rigid coangs. Offshore plaorm decking, tanks, piping, petrochemical plants, pressure vessels, ship hulls and ballast tanks. Water/waste treatment plants, water tower. SpeedBlast Performance Applicaon Our versale maintenance grade abrasive. Removal of light-medium coangs and/or rust. • Efficiently produces surface profile from 2.0 - 3.0 mil (50 - 75 μm) with exceponally clean surface, enabling ideal preparaon for most industrial coangs. • Blasng rates: Up to 360 ſt 2 /hr. • Consumpon rate: As low as 1.5 lb/ſt 2 . ‘All-around’ garnet abrasive. General industrial maintenance. Construcon and maintenance of commercial buildings, chemical plants, power staons, mining and processing equipment, gas and sewerage plants, desalinaon and industrial plants. Tanks, piping, pressure vessels, ship hulls, ballast tanks and offshore plaorm decking.
Transcript of GMA Garnet™ · Removal of light-medium coatings and/or rust. • Efficiently produces surface...
A full range of garnet abrasives for any surface preparation requirement from removing resistant coatings and heavy rust to polishing glass and delicate restoration work.
GMA Garnet™ is approved by major paint manufacturers, preferred by major oil companies, shipyards and international fabricators and is available through an extensive global network.
GMA Garnet™Blasting Abrasives
gmagarnet.comASIA PACIFIC | AMERICAS | EUROPE | MIDDLE EAST
ExtremeBlast Performance Application
Our coarsest grade for the toughest jobs.
Removal of resistant specialist coatings, heavy liners and marine foulings. Ideal on high build coatings of 30 + mils.
• Uniform surface profile of 3.5 - 4.5 mil (90 - 115 μm) with exceptionally clean surface, enabling remarkable bonding of specialist coatings.
• Blasting rates : Up to 260 ft2/hr.
• Consumption rate : As low as 2 lb/ft2.
Ideal for TSA preparation, coatings for extreme conditions, preparing critical components.
Removal of high build coatings, pliable and flexible coatings including coal tar, inner liners and some marine coatings.
Offshore platform decking, tanks, piping, pressure vessels, ship hulls and ballast tanks.
ToughBlast Performance Application
Our engineered blend for superior cleaning on tough jobs.
Fast removal of high build up coatings and/or heavy rust.
• Uniform surface profile from 3.0 - 4.0 mil (75 - 100 μm) with ideal surface cleanliness for unmatched adhesion.
• Blasting rates: Up to 360 ft2/hr.
• Consumption rate: As low as 1.5 lb/ft2.
High performance ‘all-around’ garnet abrasive.
Heavy industrial maintenance.
Great on 2 coat systems, 3 coat systems and thick rigid coatings.
Offshore platform decking, tanks, piping, petrochemical plants, pressure vessels, ship hulls and ballast tanks.
Water/waste treatment plants, water tower.
SpeedBlast Performance Application
Our versatile maintenance grade abrasive.
Removal of light-medium coatings and/or rust.
• Efficiently produces surface profile from 2.0 - 3.0 mil (50 - 75 μm) with exceptionally clean surface, enabling ideal preparation for most industrial coatings.
• Blasting rates: Up to 360 ft2/hr.
• Consumption rate: As low as 1.5 lb/ft2.
‘All-around’ garnet abrasive.
General industrial maintenance.
Construction and maintenance of commercial buildings, chemical plants, power stations, mining and processing equipment, gas and sewerage plants, desalination and industrial plants.
Tanks, piping, pressure vessels, ship hulls, ballast tanks and offshore platform decking.
Secure Supply
ConsistentQuality
Technical Expertise
Customer Focus
Abrasive Blasting
Waterjet Cutting Recycling
GMA Garnet™Blasting Abrasives
For more information, write to: [email protected] or visit gmagarnet.com GMA Americas T +1 832 243 9300
GMA’s Specialist Coating Removal Range
gmagarnet.comASIA PACIFIC | AMERICAS | EUROPE | MIDDLE EAST
NewSteel Performance Application
Our ideal abrasive for new steel, lightly rusted surfaces and thin coatings.
Unrivaled speed in removing mill scale.
• Produces surface profile from 1.5 - 2.5 mil (40- 65μm) with exceptionally clean surface, enabling ideal preparation for initial coating application.
• Blasting rates: Up to 400 ft2/hr.
• Consumption rate: As low as 1.3 lb/ft2.
New construction; removal of light rust or mill scale on new steel.
Removal and preparation for powder coating.
Tanks, piping, pressure vessels, ship hulls, ballast tank and offshore platform decking.
PrecisionBlast Performance Application
Our ideal abrasive for fast gentle cleaning on precision equipment and vulnerable surfaces.
Removal of mill scale, surface preparation of stainless steel, aluminum and titanium, as well as etching glass.
• Produces surface profile of 1.0 - 2.0 mil (25 -50μm) or less.
• Blasting rates: Up to 330 ft2/hr.
• Consumption rate: As low as 1 lb/ft2.
Preparing ferrous and non-ferrous metals and easily damaged or deformed substrates.
Cleaning precision equipment like gauges, turbines, propellers, valve bodies, threads (valves, bolts, pipes).
Weld seam inspection.
Efficient alternative to hand tooling.
Glass, fiberglass, plastics, softer metals, automobile, fire restoration and graffiti removal.
SoftBlast Performance Application
Our softest product, enabling cleaning and polishing of the most delicate surfaces.
Extremely delicate blasting, cleaning and polishing.
• Produces surface profile of 0.5 - 1.0 mil (12- 25μm) or less.
• Blasting rates: Up to 300 ft2/hr.
• Consumption rate: As low as 0.75 lb/ft2.
Preparing softer metals, polishing and lapidary.
Providing exceptional cleaning for extreme adhesion requirements as well as cleaning heavily pitted surfaces.
The cleaning and restoration of historical landmarks, brick, stone and sensitive substrates. Graffiti removal.
Restoration of log and old wood homes.
Automotive, marine and antique restoration.
Production and consumption rates may vary based on nozzle size, pressure at the nozzle, standoff distance, abrasive metering, equipment quality, surface type, coating type and thickness. The rates and results were achieved by setting the nozzle pressure to operate within the range of 95 psi to 100 psi. GMA will work with you to produce optimum performance on blasting jobs, reducing time and cost, and producing the best surface result for any coating.
