GLENLAKE - Trex Commercial Products, Inc. · 2019-12-19 · GLENLAKE Architectural Railing System...
5
GLENLAKE Architectural Railing System This document contains SC Railing Company proprietary information. Disclosure is prohibited without the prior written permission of SC Railing Company. 7008 NORTHLAND DRIVE, SUITE 150 MINNEAPOLIS, MINNESOTA 55428 p: 1-877-215-RAIL(7245) w: sc-railing.com Integrating lateral tubes in lieu of traditional glass panels, Glenlake railing system embodies a clean, modern design.
Transcript of GLENLAKE - Trex Commercial Products, Inc. · 2019-12-19 · GLENLAKE Architectural Railing System...
GLENLAKEArchitectural Railing System
This document contains SC Railing Company proprietary information. Disclosure is prohibited without the prior written permission of SC Railing Company.
7008 NORTHLAND DRIVE, SUITE 150 MINNEAPOLIS, MINNESOTA 55428
p: 1-877-215-RAIL(7245) w: sc-rai l ing.com
Integrating lateral tubes in lieu of traditional glass panels, Glenlake railing system embodies a clean, modern design.
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-RAIL(7245) w: sc-railing.com
Glenlake SeriesMounting Options
Top Mount (Fascia Mount also available)
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-RAIL(7245) w: sc-railing.com
Glenlake Series
Tech Specifications
Material: Stainless Steel or wood top cap with 304 or 316 stainless steel posts and fittings
Height: 42” or Custom
Standard spacing : 4’ On Center - Standard (Custom spacing available dependent upon engineering)
Mount Type: Top or Fascia
Top Rail: Stainless steel - 2.5” diameter with circumferential #4 finish
Wood - 2.5” diameter using hard maple, oak, and cherry (Custom Options Available)
Handrail: 1.5” Diameter 304 or 316 stainless steel with circumferential #4 finish
Post: 304 or 316 Stainless steel with circumferential #4 polish
Fittings: 304 or 316 stainless steel
Saddle: 304 or 316 stainless steel
Infill options: 3/4” O.D., 18 Gauge stainless steel lateral tubes
ASTM STDS: A240/A240M/A554/A555/A666 (Stainless), C1048-12 (Glass),
F837-08 & F2281-04 (S/S Hardware)
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-RAIL(7245) w: sc-railing.com
Glenlake SeriesStair Configuration
Level Configuration
STAINLESS STEEL POST & TOPCAP SADDLE
5” MIN. CONCRETE DEPTH NEEDED FOR EMBEDMENT
4 1/2” O.D. STAINLESS STEEL COVER PLATE
AS
RE
QU
IRE
D
STAINLESS STEEL TOPCAP
STAINLESS STEEL TOPCAP
STAINLESS STEEL POST & TOPCAP SADDLE
STAINLESS STEEL POST ADAPTOR AND TUBE HOLDER
STAINLESS STEEL POST ADAPTOR AND TUBE HOLDER
POST WELDED TO STRINGER
2 3/4” O.D. STAINLESS STEEL COVER PLATE
STAIR TREAD
STAINLESS STEEL ADJUSTABLE HANDRAIL BRACKET
1 1/2” O.D. STAINLESS STEEL HANDRAIL
1.9” O.D. x 11 GAUGE SS POST AT 4’ 7” O.C. MAX
1.9” O.D. x 11 GAUGE SS POST AT 4’ 7” O.C. MAX
3/4” O.D., 18 GAUGE STAINLESS STEEL TUBE
3/4” O.D., 18 GAUGE STAINLESS STEEL TUBE
AS
RE
QU
IRE
D
AS
RE
QU
IRE
D
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-RAIL(7245) w: sc-railing.com
Glenlake SeriesTop Mount Base Plate Welded Mounting Tube Stinger
Fascia Mount Tube Stringer Fascia Mount Bracket Detail
Notes:Handrails can be mounted to concrete or steel. Anchor size/Type may vary due to field conditions.
3/8” X 3” SS SLEEVE ANCHORS
STAIR TREAD
4 1/2” O.D. SS SNAP-ON COVER PLATE
3/8” SS BASE PLATE
2 3/4” O.D. SS COVER FLANGE
POST WELDEDTO STRINGER
CONC. SLAB
4” MIN.
4”
POST INSERT (1 1/4” SCH 40 STEEL PIPE)
WELDED IN POST
SS FACE MOUNTED BRACKET
STAIR TREAD
2” MIN.
4”
6 7
/16
”
2 1/8”
TYPE HB-M12 SS HOLLO-BOLTS
SS NUT WELDED TO POST INSERT
3/4” - 10 FULLY THREADED SS BOLT
