GigaLine® Fiber optic cabling systems for DataCenter · Office ...

GigaLine® Fiber optic cabling systemsfor DataCenter · Office · Industry

The Quality Connection

www.leoni-infrastructure-datacom.com

2

Issue: March 2014 © LEONI Kerpen GmbHThe contents of this catalog are protected by copyright. All rights are reserved.

All necessary planning documentation available online:www.leoni-infrastructure-datacom.comTechnical changes, errors and omissions without prior notice.

Safety instructionsCables are to be used for the designated applications only. .

WaiverThe specifications in this document are provided according to our best cur-rent knowledge. However, these specifications may not be considered an assurance of specific properties or suitability for specific purposes of the respective products. Such indications may not be interpreted as a misguid-ance for the violation of property rights or as an assurance of a correspond-ing license. The suitability of each product for any particular purpose must be checked beforehand with our specialists. Our policy is to continuously improve our materials and products. Therefore, we reserve the right to offer alternatives consistent with our manufacturing programme at the time of enquiry. All information concerning material properties, fire performance, construc-tion, electrical and technical data, prices etc. reflects our current level of knowledge and is provided without obligation. Dimensions and weights are guideline values. All specifications can be changed at any time without prior notification.

General conditions of sale and deliveryWe refer to the currently valid General conditions of sale and delivery which can be obtained from the respective companies.

GigaLine® Cabling systemsWhenever broadband data transmission in combination

with large transmission lengths in LAN or MAN is

required, fiber optic cable and connection technology

is the best choice.

With GigaLine® fiber optic cables and GigaLine® FO

connectivity, LEONI offers high-speed data motorways

for backbone networks.

LEONI products and solutions are used wherever the

highest reliability, quality and durability are a must

– even in harsh and unfavourable conditions.

Welcome to the mega store for cable and system solutions


3

pageThe LEONI Group 4High-quality industrial cables and conductors 5Great brands, great service 6Green Technology 8

Technologies – investment in sustainable security 8

GigaLine® product range

GigaLine® FO data cables

• Introduction

• GigaLine® FO data cables

• GigaLine® „fire secured“ FO data cables

12

14

25

33

GigaLine® FO connectivity

• Introduction – GigaLine® FO cabling systems

• GigaLine® Trunk and splice boxes

• GigaLine® Compact – fiber optic distribution system

• GigaLine® Office and floor distributors

• GigaLine® Fiber-To-The-Desk (FTTD) wall outlets

42

44

46

54

60

64

GigaLine® FO patch cords / trunk cables

• GigaLine® Patch cord

• GigaLine® Trunk – pre-assembled trunk cables

70

72

76

GigaLine® DataCenter links 86

Acceptance measurement for GigaLine® cabling systems 92

Field of applications

Office 94

DataCenter 96

Index 102

LEONI news 103


4

The LEONI Group Cable expertise for the most varied industrial markets

Your markets – our strength.

As diverse as our product and service range are the markets and

sectors LEONI is supplying. We focus our activities on customers

in the fields of Automotive & Commercial Vehicles, Industry &

Healthcare, Communication & Infrastructure, Electrical Appliances

and Conductors & Copper Solutions.

We are among the leading European suppliers in the Communi-

cation & Infrastructure market to which at LEONI as a cable

manufacturer also belong activities in the fields of Infrastructure

& Data Communications, Industrial Plant Projects, Solar & Wind-

power, Energy & Telecommunications, Irradiation Cross-Linking

and Traffic Engineering. Our customers benefit worldwide from

innovative as well as reliable and long-lasting products of high

quality. LEONI – we create the best connection for your future.

For further information www.leoni.com

LEONI's core markets

LEONI is a leading supplier of cable systems and related

services for the automotive industry and various other in-

dustrial sectors.

Our group of companies employs more than 61,000 people in

33 countries. Corporate vision, highest quality and innovative

power have made us one of the leading cable manufacturers in

Europe. LEONI develops and produces technically sophisticated

products ranging from wire and optical fibers to cables through

to complete cable systems and also offers the related services.

Moreover, the product portfolio comprises strands, standardised

cables, hybrid cables, glass fiber as well as special cables, cable

harnesses, wiring systems components and fully assembled

systems for applications in various industrial markets.

Automotive &

Commercial Vehicles

Communication &

Infrastructure

Industry &

HealthcareElectrical

AppliancesConductors

& Copper Solutions

Products and services portfolio at a glance

Service

Optical cablesHybrid cablesCopper cables

Cable systems / Wiring systems

Relay and safety systemsSensorsCable harnesses

ConnectorsOptical fibersWires & strands

Engi

neer

ing


5

Business Unit Infrastructure & Datacom

Future-proof complete solutions For building infrastructure cabling in energy and data technology

Data networks of the future

In order to do justice to the future exchange of data, we already

offer cabling systems that are structured and a safe investment.

Bigger volumes of data, global linking and easily scalable data

networks will shape the future. Requirements that we are con-

fronting with innovative, safe and sustainable high-grade glass

fibre and copper cables and modular cabling and connection

systems.

Cost-efficiency in every stage of the project

Our service package BETAsolution® provides on-site consulting

from planning, projecting to logistics and installation all the way

to project acceptance. Rising costs and time pressures combined

with ever-higher requirements for materials and sustainability

call for increasingly efficient project management. Major projects

like the Gotthard Base Tunnel in Switzerland benefit not only

from the comprehensive range but also from our knowledge and

skill. BETAsolution® reduces interfaces and considerably in-

creases project efficiency. Specialists ensure comprehensive com-

plete solutions worldwide and thus create a true competitive

edge for our clients.

Our long-standing tradition of producing innovative cable

products is our pledge to constant peak performance. Starting

with our competence centres in Däniken (Switzerland) and

Stolberg (Germany), it is necessary to always plan ahead in the

fields of development and research for our products.

Connecting tomorrow’s world today already then also means

looking ahead. Constant advancement and research is our claim

in this. We see complexity as a challenge. Being innovative to us

means moving forward and simultaneously trusting in our com-

petencies. We create connections that link people safely, quickly

and convincingly – today and tomorrow.

For further information www.leoni-infrastructure-datacom.com

The demands on traffic, data and infrastructure networks will

rise in the future. Larger data bandwidths, global networking

and increasing individual traffic are associated with constraints

on resources, cost pressures and environmental protection.

Providing efficient, sustainable and safe power supply as well

as energy and data distribution in buildings is the demand of

tomorrow. LEONI’s business unit Infrastructure & Datacom has

realised these insights for quite some time and produces the

quality connections of the future today already. Together with

the Energy & Communication business unit, LEONI offers future-

proof complete solutions for building infrastructure cabling in

energy and data technology.

The innovative energy supply of tomorrow

The exponentially increasing energy consumption is rising along

with the growing urbanisation and mobility and also determines

the trends in the energy industry. We try to face these insights

successfully today already. With our products and services for

energy production and distribution we want to make an active

contribution to the prevention of today’s energy loss in the

future. Energy and communication will inevitably merge in the

future. With the focus on intelligent energy grids we contribute

to sparing the environment, resources and costs.

For maximum safety in building cabling

As a leading supplier in the market of structured building cabling,

we combine competencies – in energy and communications

networks, public buildings, civil engineering, offices, data centres

and industry. While increasingly complex applications confront

the infrastructure with new challenges, we are obligated to pro-

vide maximum safety everywhere. Flexible system and connection

solutions also make it possible to be prepared for tomorrow’s

connections today.


6

Great brands, great service Put your trust in the best partner to suit your needs

Investors, integrators, designers, installers and the trade –

you can now get all your cabling, connectivity and complete

cabling solutions from a single source – from copper and

fibre optic technology to halogen-free energy cables, with

or without circuit integrity. Constant safety, environmental

compatibility and energy efficiency innovations complete

the list of customer benefits.

Global presence, consulting on site during all stages of a

project as well as extensive experience gained in numerous

projects and far-reaching synergies inside and outside

the LEONI Group makes us international one of the most

accredited partners in the field of building and infrastructure

cabling.

Our commitment to developing innovative prod-ucts proves our dedication to our responsibility. In conjunction with our consulting services,we create trust and help our partners accomplish maximum safety for people and infrastructurein their projects.

Infrastructure –for maximum safety in cabling for buildings

Our products set the standard worldwide – in buildings, in under-

ground construction and in traffic infrastructure. Our cables

based on our proprietary patented design and production pro-

cesses ensure maximum safety and performance. The halogen-

free, fire-resistant insulation materials meet all the relevant stand-

ards while their extended service life also presents a com-

pelling advantage. Whether as laying systems or highly complex

network systems, our full infrastructure range convinces cust-

omers worldwide.

■■ BETAflam® according to the VDE standard Safety and installation cables

■■ BETAflam® according to the British Standard BS 6387 Safety and installation cables

■■ BETAfixss® with circuit integrity under fire acc. to DIN 4102 Certified installation systems


7

Datacom – for maximum data integrity and bandwidth

From the very beginning of the digital data era, we have fulfilled

data networking requirements for both the short term and the

far future by using great innovation and a forward-looking ap-

proach. The profound expertise of the Infrastructure & Datacom

BU in copper and fibre optical cabling technologies represents a

powerful advantage in structured cabling systems for industry,

data centres and offices – the sustainable copper and glass fibre

cables of our own production are among the safest and most

innovative products in the primary to tertiary cabling market.

■ MegaLine® Copper cables and passive system components

■ GigaLine® Fiber optical cables and passive system components

■ VarioLine® Modular system peripherals

Energy – the best connection for energy supply

With innovative and sustainable solutions we face the dynamic

development in the energy and communication market today

already. As one of the leading system and development partners

for energy production, transmission and distribution, we accept

the responsibility for safe and sustainable energy supply.

Our low- and medium-voltage power cables provide convincing

durability and resist even the most adverse conditions.

■ BETApower® Cable for power generation

■ BETAsolution® Cost-effectiveness at every phase of the project


8

Green Technology Our company aim is to combine innovation with sustainability.

Our vision is to create sustainable connections in technological

harmony with the natural resources. The cycle of nature gives

us the best model to emulate. It is our responsibility to learn

from nature and make use of it while conserving it and treating

it with care. The growing scarcity of the natural resources and

the increasing burden on the environment require a rethink

on all levels of society. For LEONI, sustainability is an integral

part of group policy. We are the first cable manufacturer in the

world to develop a holistic concept for “green technology”.

While trends like globalisation, mobility and urbanisation also

determine the markets, sustainability and global responsibility

are a central credo. To be considered the most innovative cable

manufacturer for environmentally friendly technologies – that

is our goal. At that, it is of vital interest to us to detect the needs

and requirements of tomorrow today and supply the markets

of the future with sustainable, future-proof solutions.

Green technology stands for the resource-conserving and low-

emission production of sustainable quality cables made with

low-pollution elements. We constantly work at optimising the

efficiency with which resources are used in the manufacturing

process by deploying energy-efficient machines or taking heat

recovery measures. More and more locations in our global pro-

duction network are environmentally certified according to the

ISO 14001 standard.

As a worldwide active and leading European supplier of wires,

optical fibres, cables and cable systems for communication and

infrastructure projects it is our responsibility to constantly op-

timise the sustainability and durability of our products, system

solutions and services and thus lower the environmental load.

We have to increase the amount of environmentally compatible

raw materials in our cable products as well as the recyclability

of processed materials or components and in doing so create

end products that are developed for the environmental stand-

ard of tomorrow today.

In conjunction with the ecological compatibility, future tech-

nologies are measured in terms of efficiency, service life, emis-

sion reduction and the conservation of natural resources. In-

novative cable products and systems, holistic solutions and

maximum performance in project management are the added

value which we offer to our customers and business partners.

These are also our cornerstones for strong connections into the

future.

REACh

EU Directive 2012/19/EU on waste electrical and

electronic equipment.

EU Directive 2011/65/EU for restriction of the use

of certain hazardous substances in electrical and

electronic equipment.

EU Regulation 1907/2006/EC (REACh) the chemical

regulation of the European Union.

There are various environmental directives in the European

Union (EU). Directive 2012/19/EU WEEE (Waste Electrical and

Electronic Equipment) regulates the disposal of electrical and

electronic equipment and components. The use of certain

hazardous materials in electrical and electronic devices is de-

fined by Directive 2011/65/EU RoHS 2 (Restriction of

Hazardous Substances). Chemicals and materials in general

are regulated by the law on chemical substances 1907/2006/

EC REACh (Registration, Evaluation, Authorisation and Re-

striction of Chemicals).

This means avoiding the following substances, among others:■■ Polybrominated diphenyl ether (PBDE)■■ Decabromodiphenyl ether (DecaBDE)■■ Perfluorooctane sulfonate (PFOS)■■ Pentabromodiphenyl ether (PentaBDE)■■ Octabromodiphenyl ether (OctaBDE)■■ Lead (Pb)■■ Mercury (Hg)■■ Cadmium (Cd)■■ Hexavalent chromium (Cr VI)■■ Polybrominated biphenyls (PBB)

Cables and conductors and their associated connectors are

only affected by Directive 2012/19/EU WEEE insofar as they are

an internal part of the listed equipment and components.

Cables and conductors have now been included in 2011/65/EU

RoHS 2 since 2013 for the first time (Category 11 or as an internal

component of the respective product). Fiber optic cables, power

cables (>250 V) and installed fixed cables e.g. in premises are

not concerned. The only permissible marking according to RoHS

2 is the CE marking, which is printed on the product package.

What does REACh mean?

REACh stands for Registration, Evaluation, Authorisation

and Restriction of Chemicals.

With REACh, the previous chemical law is basically

harmonised, simplified and valid in all EU Member States.

Under REACh, there is a so-called candidate list with

substance of very high concern (SVHC), which are subject

to obligatory information and should be substituted in

the long run. The list of candidate materials is updated

twice per year by the European Chemicals Agency (ECHA)

in Helsinki.


9


10

Technologies – investment in sustainable security Universal application with high system integrity

Our development and production centres LEONI Studer

(Switzerland) and LEONI Kerpen (Germany) are linked by

one thing in particular: competence. In extensive production

areas, we work with state-of-the-art methods and systems

in plastics processing, materials processing, extrusion

technology, electron beam cross-linking and the testing of

all products.

We use state-of-the-art production equipment in order to of-

fer our customers a maximum of safety and quality. New and

innovative plastics mixtures and cables are constantly being

developed in modern laboratories. The focus is on improved

insulating properties, higher temperature tolerances, longer

lifetimes, easy handling and better safety features. Our test

laboratories for flammability tests, HF technology and optical

measurement technology safeguard our quality standards and

promote innovation.

This is demonstrated by the large number of approvals and

certificates coming from well-known independent testing insti-

tutes worldwide.


11

■■ Halogen free

IEC 60754-1, EN 50267-2-1

■■ Degree of acidity of combustion gases

IEC 60754-2, EN 50267-2-2

■■ Smoke density

IEC 61034, EN 61034

■■ Flame retardancy

IEC 60332-1, EN 60332-1,

IEC + EN 60332-3-22/-24

■■ Circuit integrity

DIN VDE 0472-814, EN 50200,

VdS 3423, VDE 0482 BS 8434

■■ System integrity under fire

DIN 4102 part 12

■■ IT cabling systems Office

EN 50173-2, ISO/IEC 11801

■■ IT cabling systems Industry

EN 50173-3, ISO/IEC 24702

■■ IT cabling systems DataCenter

EN 50173-5, ISO/IEC 24764

Numerous national and international certificates confirm the company’s ability to provide innovative solutions.


12GigaLine®

GigaLine®

FO data cables


Office DataCenter Industry 13 GigaLine®

GigaLine® FO data cables page

GigaLine® FO data cables The fiber 14

GigaLine® FO data cables For LAN, WAN and SAN 17

GigaLine® fiber qualities 18

GigaLine® colour codes 19

GigaLine® type codes 20

Buffered fiber sheaths- and jacketing material for optical cables 21

Rodent protection for fiber optic cables 22

Pictograms 23

Handling and safety notices 24

GigaLine® FO data cables 25

o ■dc GigaLine® Indoor cable, duplex fig 8 KL-I-V(ZN)H 2 G/E 25

o ■dc■ i GigaLine® Indoor cable, duplex fig 0 KL-I-V(ZN)HH 2 G/E 26

o ■dc GigaLine® Indoor cable, Mini-Breakout KL-I-V(ZN)H n G/E 27

o ■dc■ i GigaLine® Breakout cable KL-I-V(ZN)HH n G/E 28

o ■dc■ i GigaLine® Universal cable, Mini-Breakout 800 N KL-U-VQ(ZN)H n G/E 29

o ■dc■ i GigaLine® Universal cable, central 2500 N KL-U-DQ(ZN)BH 1xn G/E 30

o ■dc■ i GigaLine® Universal cable, stranded 4000 N KL-U-DQ(ZN)BH nxm G/E 31

o ■dc■ i GigaLine® Universal cable, central 2500 N KL-U-DQ(ZN)H(SR)H 1xn G/E 32

LEONI „fire secured“ FO data cables 33

o ■dc■ i GigaLine® „fire secured“ universal cable, central with CIKL-U-D(ZN)BH 1xn G/ESystem integrity at least 90 min

34

o ■dc■ i GigaLine® „fire secured“ universal cable, central with CIKL-U-DQ(ZN)H(SR)H 1xn G/E System integrity at least 120 min

35

o ■ i GigaLine® Outdoor cable, central 1750 N KL-A-DQ(ZN)B2Y 1xn G/E 36

o ■ i GigaLine® Outdoor cable, stranded 4000 N KL-A-DQ(ZN)B2Y nxm G/E 37

o ■ i GigaLine® Outdoor cable, central 1750 N KL-A-DQ(ZN)2Y(SR)2Y 1xn G/E 38

o ■ i GigaLine® Outdoor cable, stranded 4000 N KL-A-DQ(ZN)2Y(SR)2Y nxm G/E 39

o ■ i GigaLine® Outdoor cable, stranded with sheath, 4000 N KL-A-DF (ZN)(L) 2Y nxm G/E 40

o ■ Office cables

dc■ DataCenter cables

i ■ Industrial cables


FO data cables14GigaLine®

Advantages of j-BendAble fibers■■ Greater reliability with higher packing density and installation

in constricted areas due to the low bending loss.■■ Low-risk patching in operation – the data transmission

remains stable despite significant bending.■■ The doubled tensile strength of the fibers minimises the risk

of a fiber tear in the patch field (200 kpsi in comparison to the

standard with 100 kpsi).■■ Maximum security for a mix and match with fibers of other

manufacturers due to the minimum transition damping.

Made in Germany ➔ j-BendAble fibers are manufactured by the LEONI subsidiary j-fiber GmbH in Jena – Germany's only specialists for fiber production. Learn more at www.j-fiber.de.

The right fiber

LEONI offers a comprehensive range of optical fibers tailored to the

various network requirements such as future-proof high-perfor-

mance transmission in DataCenters, reliable office networks and

stable industrial networks.

LEONI Multimode fibers

GigaLine® cables offer immediate, significant added value for

your operation. At no additional charge, the fiber optic cables

are now equipped with bend insensitive OM3 and OM4 fibers

(j-BendAble).

The steady increase in internet and intranet traffic, multi-

media applications and the establishment of central storage

networks (SAN or Storage Area Networks) in companies

have fundamentally changed the traffic and load distribu-

tion in networks. New media require new, more powerful

passive network infrastructures.

LEONI offers a future-proof cabling system with reserves

well beyond those stipulated in the standards.

Comparison of requirements

for Standard and GigaGrade

Fiber category OM1 G62.5/125 Fiber category OM1 G62.5/125

at 850 nm at 1,300 nm

Standard OM1OM1e LEONI

GigaGrade G62.5/125 MStandard OM1

OM1e LEONI GigaGrade G62.5/125 M

Attenuation 3.5 dB/km 3.0 dB/km 1.5 dB/km 0.8 dB/km

Modal bandwidth 200 MHz x km 250 MHz x km 500 MHz x km 800 MHz x km

Gigabit Ethernet segment length 275 m 500 m 550 m 1,000 m

10 Gigabit Ethernet segment length 32 m 65 m 300 m 450 m


for Standard and GigaGrade

Fiber category OM2 G50/125 Fiber category OM2 G50/125

at 850 nm at 1,300 nm

Standard OM2OM2 LEONI

Standard GigaGrade G50/125

OM2e LEONI High Performance

GigaGrade G50/125Standard OM2

OM2 LEONI Standard

GigaGrade G50/125

OM2e LEONI High Performance

GigaGrade G50/125

Attenuation 3.5 dB/km 2.7 dB/km 2.5 dB/km 1.5 dB/km 0.8 dB/km 0.7 dB/km

Modal bandwidth 500 MHz x km 500 MHz x km 600 MHz x km 500 MHz x km 500 MHz x km 1200 MHz x km

Gigabit Ethernet segment length

550 m 550 m 750 m 550 m 550 m 2,000 m

10 Gigabit Ethernet segment length

82 m 82 m 150 m 300 m 300 m 700 m

GigaLine® FO data cables The fiber


Office DataCenter Industry FO data cables 15 GigaLine®

GigaGrade GigaGrade j-BendAble j-BendAble

OM1 OM2e OM3 OM4

LAN Datacenter

LAN Office

LAN Industry

j-BendAble OM4 future-proof without compromise

The j-BendAble OM4 multimode fiber fulfils the requirements of the OM4

standard for the serial transmission of 10 Gbit/s with an EMB of 4,700 MHz

x km over 550 m. The fiber has been optimised for applications with 850

nm VCSEL and offers the possibility of use at higher transmission rates such

as 40 Gbit/s or 100 Gbit/s going into the future. j-BendAble OM4 is the first

choice when it comes to speed and high data rates.

j-BendAble OM3 for 10 GbE networks

The sophisticated IT cabling in DataCenters and

office buildings, with a 10 Gigabit Ethernet-compa-

tible network, is based on the laser-optimised

j-BendAble OM3 fiber.

The optimum multimode fiber for every application:


for Standard and OptiGrade


at 850 nm at 1,300 nm


j-BendAble OM3Standard OM3

OM3 LEONIj-BendAble OM3


Modal bandwidth (overfilled launch) 1500 MHz x km 1,500 MHz x km 500 MHz x km 500 MHz x km

EMB (effective modal bandwidth) 2000 MHz x km 2,000 MHz x km n.a. n.a.

Gigabit Ethernet segment length 550 m 900 m 550 m 550 m

10 Gigabit Ethernet segment length 300 m 300 m 300 m 300 m

40/100 Gigabit Ethernet segment length 100 m 100 m 100 m 100 m


for Standard and OptiGrade


at 850 nm at 1,300 nm


j-BendAble OM4Standard OM4

OM4 LEONI j-BendAble OM4


Modal bandwidth (overfilled launch) 3,500 MHz x km 3,500 MHz x km 500 MHz x km 500 MHz x km

EMB (effective modal bandwidth) 4,700 MHz x km 4,700 MHz x km n.a. n.a.

Gigabit Ethernet segment length 550 m 1000 m 550 m 550 m

10 Gigabit Ethernet segment length 550 m 550 m 300 m (LX4) 300 m (LX4)

40/100 Gigabit Ethernet segment length 150 m 150 m 150 m 150 m



j-LBL SMF flexible and compatible

The j-LBL SMF as per ITU-T G657.A is a high-performance field-

tested singlemode fiber for applications where the need for

compatibility with installed G.652.D networks is linked with

the requirement for improved bending characteristics for sturdy,

flexible and space-saving installations. The j-LBL SMF offers

maximum transmission performance with minimum attenua-

tion. Due to the reliably and permanently low attenuation at

1,383 nm, it can be used in the wavelength range from 1,360 nm

to 1,480 nm and the fiber is therefore also suitable for wave-

length multiplexing (DWDM and CWDM).

Comparison of requirements for Standard and j-LWP SMF+

Fiber category OS2 E9/125 (G.652.D)

at 1,310 nm at 1,550 nm

Standard OS2IEC 60793-2-50 B6_a

LEONI OS2 j-LWP SMF+

Standard OS2 IEC-60793-2 50-B1.3

LEONI OS2j-LWP SMF+


Attenuation at 1,383 nm < 0.40 dB/km 0.36 dB/km — —

1 Gigabit Ethernet segment length 5,000 m 5,000 m — —

10 Gigabit Ethernet segment length 10,000 m 10,000 m 22,250 m 40,000 m


Comparison of requirements for Standard and j-LBL SMF

Fiber category OS2 E9/125 low bend (G.657.A)

at 1,310 nm at 1,550 nm

Standard OS2IEC 60793-2-50 B6_a

LEONI OS2 low blendj-LBL SMF

Standard OS2 IEC 60793-2-50 B6_a

LEONI OS2 low blendj-LBL SMF


Attenuation at 1,383 nm < 0.40 dB/km 0.36 dB/km — —


10 Gigabit Ethernet segment length 10,000 m 10,000 m 22,250 m 40,000 m


100 Gigabit Ethernet segment length 10,000 / 40,000 m 10,000 / 40,000 m — —

Bending characteristics

The fiber exhibits excellent splicing properties thanks to its first-

rate uniformity and geometry. This means it is backwards com-

patible with already installed conventional singlemode fibers

(to ITU-T G.652.A+B) and low-water-peak singlemode fibers

(to ITU-T G.652 C+D).

Macro-bending losses, bending-induced attenuation

Values Unit

10 bends, radius 15 mm

1,550 nm ≤ 0,03 dB

1,652 nm ≤ 0,20 dB

1 bend, radius 10 mm

1,550 nm ≤ 0,30 dB

1,625 nm ≤ 1,00 dB

30

25

20

15

10

5

08 10 12 14 16 18 20

Bending diameter [mm]

Atte

nuat

ion

[dB]

Bending sensitivity at different wavelengths

1,310 nm1,550 nm1,625 nm

j-LWP SMF+ proven for long links

The low-water-peak singlemode fiber, j-LWP SMF+ as per ITU-T

G652.D or as per EN 50173 OS2, offers the best transmission per-

formance across the entire wavelength range from 1,260 nm to

1,625 nm. The fiber can be used in the wavelength ranges from

1,360 nm to 1,480 nm due to the reliably stable, low attenuation

at 1,383 nm. The j-LWP SMF+ is the preferred fiber wherever

maximum flexibility and long transmission lengths are required.

The use of WDM systems enables the full spectrum of fiber

capacity to be used – the prerequisite for flexible network plan-

ning. The fiber is fully compatible with installed singlemode

networks and enables network solutions with maximum perfor-

mance and flexibility.

The use of fiber optic data cables is especially

recommended if…■■ electromagnetic influences can occur■■ reliable potential isolation is required■■ a wide transmission bandwidth is required■■ low attenuation and therefore long transmission links

are required■■ crosstalk is not permitted■■ sparking (for areas subject to explosion hazards) is not permit-

ted■■ low weight and small dimensions are an advantage■■ increased security against interception is required

The product range at a glance:■■ Easy-to-assemble indoor cables with compact buffered fiber

technology for the patch and horizontal areas ■■ Universal cables for the backbone area indoors and outdoors ■■ Outdoor cables for LAN and WAN applications ■■ A wide range of designs such as outdoor cables with

– corrugated steel cladding

– steel band or steel wire armour

– additional lead covering as protection against chemicals

Gigabit, 10, 40 and 100 Gigabit Ethernet – strictest require-

ments for the quality of the fiber optic cabling.

The Ethernet protocol is the state of the art today in every area

of structured cabling. The corresponding standards for trans-

mission rates from 1 Gigabit/s to 100 Gigabit/s are defined

in IEEE 802.3ba.

The process used to manufacture the fibers has been optimised

in such a way that the profile of the multimode fiber is extre-

mely precise and disturbances in the fiber core are virtually eli-

minated. As differential mode delay does not occur under these

circumstances, mode-conditioning patch cords are not neces-

sary. For more than ten years now, the standard versions of fiber

optic cables with an improved gradient fiber G50/125 from the

category "OM2e" have provided bandwidth-length products of

600 MHz x km in the first window (850 nm) and 1,200 MHz x km

in the second window (1,300 nm) as well as Gigabit Ethernet

segment lengths of 750/2,000 m.

GigaLine® fiber optic cables with OM3 and OM4 fibers are

the optimum transmission medium, whatever the future

might hold.

Using the OM4 fibers with a laser bandwidth of 4,700 MHz x km

in the first window enables segment lengths of up to 550 m with

10 GbE, up to 300 m with 16 Gbit/s Fiberchannel or up to 150 m

with 40 and 100 GbE. This in turn enables cost-effective realisa-

tion of 10 GbE in the backbone of a building in nearly all cases.

Singlemode fibers must be used over long distances. The single-

mode fibers exceed the current requirements of the OS2 stan-

dard according to EN 50173-1 with attenuation of just 0.36 dB/

km at 1,310 nm and less than 0.22 db/km at 1,550 nm.

This means that the wavelength ranges around 1,383 nm can

also be used to increase the transmission capacity. The graph

shows the steadily dropping attenuation curve from 1,300 nm

to 1,625 nm for all singlemode fibers. These characteristics and

the PMD link design value of just 0.06 ps/ km guarantee large

reserves for faster transmission rates over very long distances

and WDM transmission systems.

The use of high-quality optical fibers is the key to manag-

ing future data volumes. GigaLine® Fiber optic data cables

are the first step in careful planning and implementation

of a passive network infrastructure.



0.8

0.6

0.4

0.2

0

■ITU T 652B

■ITU T 652D

1250 1300 1350 1400 1450 1500 1550 1600 1650

Comparison SMF G652B / G652D

Wavelength [nm]

Atte

nuat

ion

[dB/

km]

GigaLine® FO data cables for LAN, WAN and SAN



Fiber specificationsGigaGrade G62.5/125

j-BendAbleG50/125

GigaGrade G50/125

j-BendAble G50/125

j-BendAble G50/125

j-LWP SMF+E9...10/125

j-LWP SMF+E9...10/125

OptiGrade IEC 11801/EN 50173 OM1e OM2 OM2e OM3 OM4 OS2 OS2 low bend

IEC 60793-2 A1b A1a.1 A1a.1 A1a.2 A1a.3 B1.3 B6_a

ITU-T G.651 G.651 G.651 G.651 G.652.D G.657.A

Attenuation coefficient

dB/km at 850 nmdB/km at 1,300 nm

max. 3.0max. 0.7

max. 2.7max. 0.8

max. 2.5max. 0.7

max. 2.5max. 0.7

max. 2.5max. 0.7

dB/km at 1,310 nmdB/km at 1,383 nmdB/km at 1,550 nmdB/km at 1,625 nm

max. 0.36max. 0.40max. 0.23max. 0.23

max. 0.36max. 0.40max. 0.23max. 0.23

Bandwidth

MHz x km at 850 nm min. 250 min. 500 min. 600 min. 1,500 min. 3,500

MHz x km at 1,300 nm min. 800 min. 500 min. 1,200 min. 500 min. 500

Laser bandwidth

MHz x km at 850 nm min. 2,000 min. 4,700

Dispersion

at 1,310 nm max. 3.5 ps/nm x km max. 3.5 ps/nm x km

at 1,550 nm max. 18 ps/nm x km max. 18 ps/nm x km

Zero-dispersion wavelength 1,302≤ λ0 ≤1,322 1,302≤ λ0 ≤1,322

Zero-dispersion slope ≤0.092 ps/nm² x km ≤0.092 ps/nm² x km

PMD

Fiber < 0.1 ps/ km < 0.1 ps/ km

Link < 0.06 ps/ km < 0.06 ps/ km

Segment length with Gigabit Ethernet

at 850 nm (1000 BASE SX) 500 m 550 m 750 m 900 m 1,000 m

at 1,300 nm (1000 BASE LX) 1,000 m 550 m 2000 m 550 m 550 m 5,000 m 5,000 m

Segment length with 10 Gigabit Ethernet

at 850 nm (10G BASE-SR/SW) 65 m 82 m 150 m 300 m 550 m

at 1,300 nm (10G BASE-LX4) 450 m 300 m 700 m 300 m 300 m 10,000 m 10,000 m

at 1,550 nm (10G BASE-ER/EW) 40,000 m 40,000 m

Segment length with 40/100 Gigabit Ethernet

at 850 nm 40/100 GBASE-SR4/SR10 100 m 150 m

at 1,310 nm 40/100 GBASE-LR4 10,000 m 10,000 m

Numerical aperture

Nominal value 0.275 0.20 0.20 0.20 0.20 0.12 0.12

Refractive index (nominal value)

at 850 nm 1.497 1.483 1.483 1.483 1.483

at 1,300 nm 1.493 1.478 1.478 1.478 1.478

at 1,310 nm 1.467 1.467

at 1,550 nm 1.467 1.467

Proof load

100 kpsi ≥ 8.8 N

200 kpsi ≥ 17.6 N

100 kpsi ≥ 8.8 N

200 kpsi ≥ 17.6 N

200 kpsi ≥ 17.6 N

100 kpsi ≥ 8.8 N

100 kpsi ≥ 8.8 N

GigaLine® Fiber qualities

Wires (with stranded loose tubes)

Counting wire Red

Counting direction wire White

Other wires Green for G50/125

Bue for G62.5/125

Yellow for E9…10/125

Dummy elements Natural colours

The wires are consecutively counted, starting with the wire closest to the counting element. The dummy elements are not counted.

Fibers (in loose tubes) IEC 60304

Fiber no. Colour

1 Red

2 Green

3 Blue

4 Yellow

5 White

6 Grey

7 Brown

8 Violet

9 Turquoise

10 Black

11 Orange

12 Pink

13 Red/black

14 Green/black

15 Blue/black

16 Yellow/black

17 White/black

18 Grey/black

19 Brown/black

20 Violet/black

21 Turquoise/black

22 Natural/black

23 Orange/black

24 Pink/black

Mini-Breakout cable EIA/TIA 598C

Fiber no. Colour

1 Blue

2 Orange

3 Green

4 Brown

5 Grey

6 White

7 Red

8 Black

9 Yellow

10 Violet

11 Pink

12 Turquoise



GigaLine® colour codes



Cable type

Communication cable KL

Field of application

Indoor cable I

Universal cable U

Outdoor cable A

Breakout outdoor cable AT

Buffered fiber

Tight buffered loose tube V

Gel-filled loose tube D

Constructional composition

Swelling material, dry, longitudinally watertight Q

Water-blocking gel-filled, longitudinally watertight F

Non-metallic strain relief (ZN)

Steel strain relief (ZS)

Armour B

Corrugated steel tape (SR)

Cable sheath

PE Polyethylene sheath 2Y

Al + PE PE coated aluminium sheath (L)2Y

FRNC Halogen-free/flame-retardant sheath H

PVC Polyvinyl chloride sheath Y

PA Polyamide sheath 4Y

PUR Polyurethane sheath 11Y

Fiber number and fiber bundling

Number of fibers n

Number of loose tubes x number of fibers per tube nxm

Miscellaneous

n Field diameter/sheath diameter in… E9/125

n Core diameter/sheath diameter in… G50/125 or G62.5/125

Wavelength

850 nm B

1,300/1,310 nm F

1,550 nm H

Bandwidth/dispersion coefficient

in MHz · km with multimode fibers, dispersion parametersin ps/nm · km with singlemode fibers

GigaLine® 1 2 3 4 5 6 7 8 9

GigaLine® Type codes for easy assignment of the construction elements in fiber optic cables

Balancing application and fire prevention criteria

The sheath around the cable protects the optical fiber(s) from

the effects of mechanical, thermal and chemical action as

well as the ingress of moisture. In the event of a fire, however,

the cable sheath should prevent a fire from spreading and stop

toxic and corrosive gases from being produced.

The use of halogen-free, flame-retardant materials is advisable

in order to protect equipment and buildings but above all to

protect people. In harsh environments, PUR and PVC, in par-

ticular, are used owing to their high resistance to oils and their

abrasion resistance. PE is also commonly used as a sheath mate-

rial for outdoor applications.

However, it is often extremely difficult to meet all the require-

ments using just one sheath material. To best satisfy the pre-

vailing local operating conditions, LEONI offers a choice of dif-

ferent materials.

Please contact us if the criteria for your particular applica-

tion are not met by the cable constructions in this catalogue.

Additional requirements can often be met through customised

measures when making the sheath (e.g. aluminium tape or spe-

cial mixtures of sheaths).

Cable sheath material

Material characteristics FRNC PUR PVC PE

Resistance to aging + + + +

Halogen-free + + – – +

Flame retardancy + ● + – –/●

Elasticity – + ● –

Abrasion resistance – ++ + +/–

Low smoke gas generation ++ ● – – –/●

Low emission of corrosive gases ++ ● – – +/●

Low smoke gas toxicity ++ ● – – +/●

No toxicological risk ++ ● – +/●

General resistance to FRNC PUR PVC PE

UV light 1) 1) 1) 1)

Water absorption – – + +

Gas diffusion – 2) – ●

Fuels – + +/– +

Petroleum/lubricants – ++ ● +

Organic solvents – + 3) – + 4)

Alcohol – – + +

Oxidants – – + –

Acids + – – + ++

Alkaline solutions + – – + +

Saline solutions + – + +

++ excellent+ good● depends on recipe– weak– – inadequate

1) UV resistance can be increased by adding black colour pigments or UV stabilisers

2) Permeation depends on the type of gas, e.g. Ar, CH4, N2, O2 low gas permeation, CO2, H2, He higher gas permeation

3) Low swelling in saturated hydrocarbons; significant swelling in aromatic hydro-

carbons. Aliphatic esters cause swelling, highly polar organic solvents dissolve under the effect of extreme swelling

4) Swelling in aliphatic and aromatic hydrocarbons and in chlorinated hydrocarbons



Jacketing material for optical cables

Fiber optic cables are relatively thin and therefore very susceptible

to rodent damage. Depending on the application it is important

that fiber optic cables can offer protection against this type of

damage. There are no national or indeed international standards

or test specifications covering the corresponding requirement for

rodent protection.

The following construction has been customary in the market

in Europe (particularly in Germany, Austria and Switzerland)

since the early 1990s:

For outdoor cables, the usual aramid yarns for strain relief are

replaced with glass rovings. These glass yarns shatter and get

into the mouth and throat of the rodents. The animals associate

gnawing on cables with pain and usually stop.

The general rule is:

The more glass rovings, the greater the protection for

the cable.

The overall diameter should also be as large as possible.

Constructions with stranded loose tubes give even less favour-

able leverage in combination with the larger core diameter.

The cable then acts like a gag bit. Before the rodent reaches the

glass rovings, however, it first has to gnaw through the outer

sheath. Constructions with an additional polyamide sheath

(thickness 0.5 mm) have also proven themselves here as poly-

amide is very hard and smooth.

This combination of plastic, glass and moisture-absorbing

swelling material has to be gnawed through before rodent

reaches the loose tubes containing the internal optical fibers.

Metal armouring must be recommended as rodent protection

for all applications where rodent damage is to be expected.

This is the case, for example, with installation in shafts or con-

duits with a correspondingly large diameter, e.g. along railway

lines or motorways.

The following types of metal armouring are available:■■ Corrugated steel cladding

The most common metal armouring is the 0.155 mm thick

corrugated steel cladding due to its very good flexibility. ■■ Steel wire armour

The steel wire armour made from wires with a thickness

of up to 1.25 mm is very robust. ■■ Steel band

Steel band sheathing consists of two overlapping layers

of steel band that are wound around the cable.

In the case of cables with two sheaths with sheathing between

them, the ingress of water into the cable core is also prevented

provided the internal sheath is not damaged.

Despite all precautions, however, damage to the outer

sheath can never be fully ruled out.

Rodent protection for fiber optic cables



Flame-retardant and halogen-free sheathThe outer sheath of the cable is self-extinguishing and does not propagate fire. The halogen-free sheath material forms neither toxic nor corrosive combustion gases in the event of fire.

Chemical resistanceGenerally good resistance to oil, petrol, acids and alkaline solutions.

Rodent proofThe cable core is protected against damage by rodents with glass rovings.

Note: Despite all the precautions, damage to the outer sheath can never be fully ruled out.

Rodent proofThe cable core is more heavily protected against damage by rodents with two sheaths and metal armouring.

Note: Despite all the precautions, damage to the outer sheath can never be fully ruled out.

Resistance to UV rays The cable outer sheath is resistant to UV rays.

Pictograms





Handling and safety notices when using optical cables

Please note the following when installing optical fibers:■■ Valid installation regulations for optical fibers■■ Valid industrial safety guidelines for handling optical fibers■■ VDE regulations (DIN EN 50174 Parts 1 to 3,

Cabling installation)

The following regulations also apply:■■ The drums must always be stored and transported standing

on their flanges■■ Please note the limit values specified in the respective

data sheet■■ Do not remove the protective packaging from the cable ends

during installation■■ Do not go below the permitted bending radius (see data sheet)

■■ Avoid soiling and mechanical loading of the assembled

connectors■■ Do not exceed the maximum tensile load of the cable in axial

direction before, during and after installation (use suitable aids)■■ The maximum tensile load only applies in conjunction with

adhesion with the strain relief elements■■ Installation is not permitted if the ambient temperature is

exceeded or gone below (specific value in the data sheet)■■ Cable runs must be selected so as to avoid mechanical loads

as far as possible and also minimise future loads■■ Mechanical stresses, for example caused by movement, must

be prevented, even during provisional installation■■ Compression of the outer sheath, for example by cable ties,

must be avoided when securing the cables

■■ After installation: carefully free the cable ends from the

packaging/pull tool■■ All cable ends must be protected from the ingress of moisture

before, during and after installation■■ Immersion with water must be avoided – the fibers and

connectors must not come into contact with water■■ Optical fibers must be unwound from the coil or ring without

torsion so that no kinks or twists can occur■■ Install optical cables with extreme care. Please make sure

that the fibers are neither overstretched nor compressed

– in addition to immediate damage, this also poses the threat

of problems with the long-term behaviour■■ When installing in protective conduits, please make sure that

these have no sharp edges and that kinks are avoided■■ The attenuation of each cable must be checked immediately

after installation using a suitable calibrated meter, otherwise

warranty claims may arise■■ Body and eye protection must be worn when handling bare

fibers from glass optical fibers, including if the cable is

damaged■■ Please note all regulations relating to eye safety

No. offibers

Buf-fered fiber-

typ

Outer diam.

approx.Weight approx.

Max. strain relief

Fire loadapprox.

Order no.

µ mm kg/km N MJ/m kWh/m OM1e

G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125

2 900 2.8x5.7 15.8 600 0.36 0.10 LKD 8DB7 0003 0000 LKD 8DA2 0003 0000 LKD 8DA5 2000 0000 LKD 8DA7 2000 0000 LKD 8DC7 2001 0000

2 600 1.8x3.7 7 400 0.14 0.04 LKD 8XB7 0013 0000 LKD 8XA2 0013 0000 LKD 8XA5 2013 0000 LKD 8XA7 0013 0000 LKD 8XC7 0013 0000

Advantages

■■ very flexible cable■■ more than twice the bandwidth

with OM2e fibers■■ for applications up to 40/100G

➊ ➋ ➌

Type KL-I-V(ZN)H 2 G/E

Application

Connection cable and patch cord for structured cabling acc. to

ISO/IEC 11801 and EN 50173 (2nd edition).

In keeping with the fiber type ideal for all applications from

Classes OF 300 to OF 10000. Suitable for direct connector

assembly.

Installation in dry areas, in cable ducts, on cable trays or in

conduits.

Construction

➊ Two single cables (2.8 mm with 900 µm semi-ight buffered

loose tubes) with strain relief in fig. 8 sheath with separator

➋ Strain relief Non-metallic (aramid yarns)

➌ Cable sheath Halogen-free, flame-retardant compound

Sheath colour OS2 ●■Yellow

OM1e/OM2e ●■Orange

OM3 ●■Aqua

OM4 ●■Heather violet

Thermal characteristics

Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–10 °C up to +70 °C

Mechanical characteristics

Min. bending radius

(over flat side)

OM1e/2e/OS2 | OM3/4 bendable

static 30 mm | 15 mm

dynamic 60 mm | 30 mm

Max. crush strength long-term 600 N/dm

short-term 1000 N/dm

Fire performance

Smoke density IEC 61034

Halogen free IEC 60754-1

Flame retardancy IEC 60332-1-2, IEC 60332-3-22, Cat. A


Office DataCenter Industry FO data cablesOffice DataCenter 25 GigaLine®

GigaLine® Indoor cable, duplex fig 8

No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.

mm kg/km N MJ/m kWh/m OM1e

G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125

2 3.1x5.2 18 600 0.63 0.18 LKD 8DB7 0011 0000 LKD 8DA2 0011 0000 LKD 8DA5 2001 0000 LKD 8DA7 2005 0000 LKD 8DC7 0010 0000


Type KL-I-V(ZN)HH 2 G/E

Application

Connection cable and patch cord for structured cabling acc.

to ISO/IEC 11801 and EN 50173 (2nd edition).



assembly.


conduits.

Construction

➊ Two single cables with strain relief (2.1 mm with 900 µm semi-

tight buffered fibers) running parallel under one sheath





OM3 ●■Aqua



Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–10 °C up to +70 °C


Min. bending radius




for single elements 30 mm | 15 mm

Max. tensile force long-term 600 N


short-term 750 N/dm

Fire performance




Further characteristics

Cable bending IEC 60794-1-2 E11

GigaLine® Indoor cable, duplex fig 0

Advantages

■■ robust ■■ more than twice the bandwidth


FO data cables

➊ ➋ ➌

26GigaLine®

No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125

2 4.2 14 800 0.45 0.13 LKD 8MB7 0011 0000 LKD 8MA2 0011 0000 LKD 8MA5 2011 0000 LKD 8MA7 0011 0000 LKD 8MC7 0011 0000







Office DataCenter IndustryOffice DataCenter Industry

Type KL-I-V(ZN)H n G/E

Application

Campus/backbone cabling, suitable for direct connector assem-

bly. Connection cable and patch cord for structured cabling

acc. to ISO/IEC 11801 and EN 50173 (2nd edition). In keeping with

the fiber type ideal for all applications from Classes OF 300 to

OF 10000.

Installation in dry areas, in cable ducts, on cable trays or in c

onduits.

Construction

➊ Up to 12 semi-tight buffered fibers (900 µm)

stranded under one outer sheath





OM3 ●■Aqua



Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–10 °C up to +70 °C


Min. bending radius


static 10 x outer Ø | 10 mm

dynamic 15 x outer Ø | 15 mm

for single elements 30 mm

Max. tensile force long-term 600 N



Fire performance






GigaLine® Indoor cable, Mini-Breakout

Advantages

■■ flexible■■ space-saving■■ more than twice the bandwidth


FO data cables

➊ ➋ ➌

27 GigaLine®

No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9...10/125

2 7.0 40 800 1.10 0.30 LKD 8BB7 0011 0000 LKD 8BA2 0011 0000 LKD 8BA5 2011 0000 LKD 8BA7 0011 0000 LKD 8BC7 0011 0000

4 7.0 45 800 1.10 0.30 LKD 8BB7 0012 0000 LKD 8BA2 0012 0000 LKD 8BA5 2012 0000 LKD 8BA7 0012 0000 LKD 8BC7 0012 0000

6 8.2 65 1,000 1.18 0.32 LKD 8BB7 0013 0000 LKD 8BA2 0013 0000 LKD 8BA5 2013 0000 LKD 8BA7 0013 0000 LKD 8BC7 0013 0000





GigaLine® Breakout cable

Advantages

■■ robust, crush resistant■■ each fiber is strain-relieved■■ more than twice the bandwidth


Central element

FO data cables

➊ ➌ ➋➍

28GigaLine®

Type KL-I-V(ZN)HH n G/E

Application

Connection cable and patch cord for structured cabling acc.

to ISO/IEC 11801 and EN 50173 (2nd edition).



assembly.


conduits.

Construction

➊ Up to 12 single cables with strain relief as breakout elements

(2.1 mm with 900 µm semi-tight buffered fibers)


➋ Ripcord under the outer sheath

➌ Strain relief Non-metallic (aramid yarns)

➍ Cable sheath Halogen-free, flame-retardant compound



OM3 ●■Aqua



Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–10 °C up to +70 °C


Min. bending radius


static 15 x outer diameter

dynamic 20 x outer diameter

for single elements 30 mm | 15 mm



Fire performance






No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9...10/125

6 5.9 25 800 0.50 0.14 LKD 8NB7 1003 0000 LKD 8NA2 1003 0000 LKD 8NA5 1003 0000 LKD 8NA7 1003 0000 LKD 8NC7 1003 0000





GigaLine® Universal cable, Mini-Breakout 800 N

Advantages

■■ flexible & space-saving■■ universal use■■ longitudinally watertight■■ more than twice the bandwidth


FO data cables

➊ ➋ ➌

29 GigaLine®

Type KL-U-VQ(ZN)H n G/E

Application

Campus/backbone cabling, suitable for direct connector assem-

bly. Connection cable and patch cord for structured cabling acc.

to ISO/IEC 11801 and EN 50173 (2nd edition). In keeping with the

fiber type ideal for all applications from Classes OF 300 to OF

10000. House connections possible without additional intercon-

nection points (splices).

Installation indoors and outdoors in dry conduits, on covered

cable trays or in cable ducts. Mechanical pulling in with winches

is only permitted in conjunction with force measuring devices

with a logging feature.

Construction

➊ Up to 24 tight buffered fibers (900 µm)


Buffered fiber colour code acc. to EIA/TIA598C



Sheath colour ●■Yellow


Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–25 °C up to +60 °C


Min. bending radius


static 10 | 5 x outer diameter

dynamic 15 | 10 x outer diameter

for single elements 30 | 15 mm


short-term 500 N/dm

Fire performance





Longitudinal watertightness IEC 60794-1-2 F5


No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125

1x2 7.6 65 2500 0.95 0.26 LKD 8UB7 00M1 0000 LKD 8UA2 00M1 0000 LKD 8UA500M1 0000 LKD 8UA7 00M1 0000 LKD 8UC7 00M1 0000










GigaLine® Universal cable, central 2500 N

➊ ➌ ➍➋

Advantages

■■ can be laid in the ground■■ universal use■■ longitudinally watertight■■ more than twice the bandwidth


with OM3 and OM4 fibers


Type KL-U-DQ(ZN)BH 1xn G/E

Application

Installation cable, suitable for campus/backbone cabling and

for structured cabling acc. to ISO/IEC 11801 and EN 50173 (2nd

edition). Ideal for all applications from Classes OF 300, OF 500,

OF 2000, OF 5000 and OF 10000. Suitable for installation indoors in

applications involving increased mechanical requirements as well

as risk of rodent damage. Suitable for splicing. House connections

possible without additional interconnection points (splices).

Installation indoors and outdoors in conduits, on covered cable

trays, in cable ducts or directly in the ground (in a bed of sand).

Mechanical pulling in with winches is only permitted in conjunc-

tion with force measuring devices with a logging feature.

Construction

➊ Central filled loose tube with max. 24 fibers, up to 12 fibers

diameter 2.9 mm, up to 24 fibers diameter 3.5 mm

Fiber colour code acc. to IEC 60304, Loose tube colour:

Yellow (E9/125), green (G50/125), blue (G62.5/125)

➋ Swellable threads

➌ Strain relief Non-metallic (glass rovings)


Sheath colour ●■Black


Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–25 °C up to +60 °C


Min. bending radius static 15 x outer diameter




Fire performance



Flame retardancy IEC 60332-1-2, IEC 60332-3-24



Impact resistance IEC 60794-1-2 E4


Resistance to microbes

No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9...10/125

2x12 11.4 141 4000 2.95 0.82 LKD 8UB7 1K06 0000 LKD 8UA2 1K06 0000 LKD 8UA5 1K06 0000 LKD 8UA7 1K06 0000 LKD 8UC7 1K06 0000



12x12 17 300 4000 4.32 1.20 LKD 8UB7 1K13 0000 LKD 8UA2 1K13 0000 LKD 8UA5 1K13 0000 LKD 8UA7 1K13 0000 LKD 8UC7 1K13 0000

Further types on request



GigaLine® Universal cable, stranded 4000 N

➊ ➌ ➎➍➋

Advantages

■■ can be laid in the ground■■ universal use■■ longitudinally watertight■■ more than twice the bandwidth


with OM3 and OM4 fibers

FO data cables 31 GigaLine®

Type KL-U-DQ(ZN)BH nxm G/E

Application

Installation cable, suitable for campus/backbone cabling and for

structured cabling acc. to ISO/IEC 11801 and EN 50173 (2nd

edition). Ideal for applications from Classes OF 300 to OF 10000.

Suitable for installation in applications involving increased mecha-

nical requirements as well as risk of rodent damage. Suitable for

splicing. House connections possible without additional intercon-

nection points (splices).


trays, in cable ducts or directly in the ground (in a bed of sand).

Mechanical pulling in with winches is only permitted in conjunc-

tion with force measuring devices with a logging feature.

Construction

➊ Stranded filled loose tube with up to 12 fibers

and blind elements, if applicable

Fiber colour code acc. to IEC 60304

Loose tube colour: Counting wire red, counting direction wire

white, yellow (E9/125), green (G50/125), blue (G62.5/125)

➋ Central GFR strength member

➌ Swellable threads

➍ Strain relief Non-metallic (glass rovings)

➎ Cable sheath Halogen-free, flame-retardant compound



Transport/storage

Installation

Operating temp.

–40 °C up to +70 °C

–5 °C up to +50 °C

–40 °C up to +60 °C






Fire performance









No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125












➊ ➌ ➍➍ ➎➋

Advantages

■■ optimal rodent armouring■■ can be laid in the ground■■ universal use■■ longitudinally and transversally

waterproof■■ more than twice the bandwidth



Type KL-U-DQ(ZN)H(SR)H 1xn G/E

Application

Installation cable, suitable for campus/backbone cabling and for

structured cabling acc. to ISO/IEC 11801 and EN 50173 (2nd edi-

tion). Ideal for all applications from Classes OF 300, OF 500, OF

2000, OF 5000 and OF 10000. Suitable for installation in applica-

tions involving increased mechanical requirements as well as risk

of rodent damage. Suitable for splicing. House connections possi-

ble without additional interconnection points (splices).

Installation indoors and outdoors in dry conduits, on covered cable

trays, in cable ducts or directly in the ground. Mechanical pulling

in with winches is only permitted in conjunction with force measu-

ring devices with a logging feature.

Construction

➊ Central filled loose tube with max. 24 fibers,

up to 12 fibers diameter 2.9 mm, up to 24 fibers diameter 3.5 mm

Fiber colour code acc. to IEC 60304,

Loose tube colour: Yellow (E9/125), green (G50/125), blue (G62.5/125)

➋ Strain relief Non-metallic (glass rovings)

➌ Inner sheath Halogen-free, flame-retardant compound

Inner sheath colour ●■Black

➍ Armouring Corrugated steel cladding




Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–25 °C up to +60 °C






Fire performance









A functioning communication system is of vital importance

in the event of a fire. It is therefore vital that a fiber optic cable

maintains its system integrity. The results of the fire tests cer-

tify that the "fire secured" fiber optic data cables maintain their

system integrity and their insulation integrity for 90 and 120

minutes respectively in the event of a fire.

In particular in public facilities and buildings where large num-

bers of people gather (e.g. tunnels, airports, hotels, etc.), fire

alarm, SOS telephone and video monitoring systems are used

to coordinate rescue measures and fire fighting efforts as effici-

ently as possible. Also in industrial facilities, processes have to

be terminated in a controlled manner in order to avoid serious

secondary damage to humans and the environment.

Modern communication systems are increasingly using optical

data transmission systems for transmitting data. These are often

the only option given the high requirements for data rates and

transmission paths.

With its "fire secured" universal cables, LEONI offers products

which are tested according to IEC 60331-25 and EN 50200 and

protect the fibers from exposure to fire thanks to their special

construction with a fire barrier.



LEONI „fire secured“ FO data cableswith a fire barrier to protect the fibers in the event of a fire


No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125

1x2 10.3 115 2500 1.03 0.29 LKD 8UB7 00B1 0000 LKD 8UA2 00B1 0000 LKD 8UA5 00B1 0000 LKD 8UA7 00B1 0000 LKD 8UC7 00B1 0000










GigaLine® „Fire secured“ universal cable, central with CI

Advantages

■■ system integrity during expo-

sure to fire for at least 90 min-

utes■■ more than twice the bandwidth


➊ ➌ ➍➍ ➎➋


Type KL-U-D(ZN)BH 1xn G/E

Application

Installation cable suitable for campus/backbone cabling

and structured cabling acc. to ISO/IEC 11801 and EN 50173

(2nd edition). Ideal for all applications from Classes OF 300 to

OF 10000. Suitable for installation in applications involving

increased mechanical requirements as well as risk of rodent

damage. Suitable for splicing. House connections possible

without additional interconnection points (splices).


conduits.

Construction

➊ Central filled loose tube with max. 24 fibers,

up to 12 fibers diam. 3.5 mm, up to 24 fibers diam. 4.0 mm

➋ with fire protection barrier



➌ Strain relief Non-metallic (glass rovings)


➎ Ripcords under the sheath



Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

– 5 °C up to +50 °C

–25 °C up to +60 °C






Fire performance





Total system and Acc. to IEC 60331-11 and -25

insulation integrity EN 50200/DIN VDE 0482 Part 1

(90 minutes)

Max. change in attenuation 2.0 dB

No. offibers

Outer diam.

approx.

Weight approx.

Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125

1x2 12.5 215 2500 2.80 0.78 LKD 8UB7 00C1 0000 LKD 8UA2 00C1 0000 LKD 8UA5 00C1 0000 LKD 8UA7 00C1 0000 LKD 8UC7 00C1 0000











GigaLine® „Fire secured“ universal cable, central with CI

Advantages

■■ system integrity during expo-

sure to fire for at least

120 minutes■■ optimal rodent armouring■■ longitudinally and transversally



➊ ➌ ➍➍ ➎➋


Type KL-U-DQ(ZN)H(SR)H 1xn G/E

Application

Installation cable suitable for campus/backbone cabling

and structured cabling acc. to ISO/IEC 11801 and EN 50173

(2nd edition). For applications from Classes OF 300 to OF 10000.

Suitable for installation in applications involving increased

mechanical requirements as well as risk of rodent damage.

Suitable for splicing. House connections possible without addi-

tional interconnection points (splices). Installation indoors and

outdoors in dry conduits, on covered cable trays or in cable

ducts. Mechanical pulling in with winches is only permitted in

conjunction with force measuring devices with a logging feature.

Construction

➊ Central filled loose tubes with max. 24 fibers,

up to 12 fibers diam. 3.5 mm, up to 24 fibers diam. 4.0 mm




➌ Inner sheath Halogen-free, flame-retardant compound

➍ Armouring Corrugated steel sheath as fire protection

barrier and rodent protection




Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–25 °C up to +60 °C






Fire performance





Total system and Acc. to IEC 60331-11 and -25

insulation integrity EN 50200: 2000 Class PH120

& BS 8434: 2003 Part 2 (120 minutes)

No. offibers

Outer diam.

approx.

Weight approx.

Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125

1x2 7.4 39 1750 1.21 0.34 LKD 8AB7 00A1 0000 LKD 8AA2 00A1 0000 LKD 8AA5 00A1 0000 LKD 8AA7 00A1 0000 LKD 8AC7 00A1 0000









Advantages

■■ economical solution for

outdoor installation■■ longitudinally watertight■■ more than twice the bandwidth



GigaLine® Outdoor cable, central 1750 N

➊ ➌➋


Type KL-A-DQ(ZN)B2Y 1xn G/E

Application

Outdoor cable for direct installation in the ground, in conduits

and where there is a risk of rodent damage in MAN (city net-

works) and LAN (campus/backbone). Suitable for structured

cabling acc. to ISO/IEC 11801 and EN 50173 (2nd edition).


Classes OF 300 to OF 10000. Easy to install thanks to grease-

free, dry cable core. Suitable for splicing.

Installation indoors, in conduits, on covered cable trays,

in cable ducts or directly in the ground. Mechanical pulling

in with winches is only permitted in conjunction with force

measuring devices with a logging feature.

Construction

➊ Central filled loose tube with up to 24 fibers




➌ Cable sheath PE, UV-resistant



Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–25 °C up to +60 °C






Fire performance






No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9...10/125

2x12 11.5 115 4000 4.10 1.14 LKD 8AB7 0K06 0000 LKD 8AA2 0K06 0000 LKD 8AA5 0K06 0000 LKD 8AA7 0K06 0000 LKD 8AC7 0K06 0000





Advantages

■■ economical solution for

outdoor installation■■ longitudinally watertight■■ more than twice the bandwidth



Office DataCenter Industry

GigaLine® Outdoor cable, stranded 4000 N

➊ ➌ ➎➍➋

FO data cablesOffice Industry 37 GigaLine®

Type KL-A-DQ(ZN)B2Y nxm G/E

Application


and where there is a risk of rodent damage in MAN (city net-

works) and LAN (campus/backbone). Suitable for structured

cabling acc. to ISO/IEC 11801 and EN 50173 (2nd edition).


Classes OF 300 to OF 10000. Easy to install thanks to grease-

free, dry cable core. Suitable for splicing.

Installation indoors, in conduits, on covered cable trays, in

cable ducts or directly in the ground. Mechanical pulling

in with winches is only permitted in conjunction with force

measuring devices with a logging feature.

Construction

➊ Stranded filled loose tube diameter 2.4 mm with

up to 12 fibers and blind elements, if applicable




➋ central strength member

➌ Swellable nonwoven


➎ Cable sheath PE, UV-resistant



Transport/storage

Installation

Operating temp.

–40 °C up to +70 °C

–10 °C up to +50 °C

–40 °C up to +60 °C






Fire performance






No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125

1x2 11.0 119 1750 3.01 1.08 LKD 8AB7 00L1 0000 LKD 8AA2 00L1 0000 LKD 8AA5 00L1 0000 LKD 8AA7 00L1 0000 LKD 8AC7 00L1 0000










GigaLine® Outdoor cable, central 1750 N

Advantages

■■ optimal rodent armouring■■ longitudinally and transversally



➊ ➌ ➍ ➎➋


Type KL-A-DQ(ZN)2Y(SR)2Y 1xn G/E

Application


and where there is an increased risk of rodent damage in

MAN (city networks) and LAN (campus/backbone). Suitable

for structured cabling acc. to ISO/IEC 11801 and EN 50173

(2nd edition). In keeping with the fiber type ideal for all appli-

cations from Classes OF 300 to OF 10000. Easy to install thanks

to grease-free, dry cable core. Suitable for splicing.

Installation outdoors in conduits, on covered cable trays.

Mechanical pulling in with winches is only permitted in con-

junction with force measuring devices with a logging feature.

Construction

➊ Central filled loose tube with up to 24 fibers



➌ Inner sheath PE

➍ Armouring Corrugated steel cladding as highly

effective rodent protection

➎ Outer sheath PE, UV-resistant



Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

– 5 °C up to +50 °C

–25 °C up to +60 °C






Fire performance






No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125









Advantages

■■ optimal rodent armouring■■ longitudinally and transversally



➊ ➌ ➍ ➏➎➋ ➐

FO data cablesOffice Industry 39 GigaLine®

Type KL-A-DQ(ZN)2Y(SR)2Y nxm G/E

Application


and where there is an increased risk of rodent damage in MAN

(city networks) and LAN (campus/backbone). Suitable for use in

structured cabling acc. to ISO/IEC 11801 and EN 50173 (2nd edi-

tion). In keeping with the fiber type ideal for all applications from

Classes OF 300 to OF 10000. Easy to install thanks to grease-free,

dry cable core. Suitable for splicing.

Installation outdoors, in conduits, on covered cable trays

or directly in the ground. Mechanical pulling in with winches

is only permitted in conjunction with force measuring devices

with a logging feature.

Construction

➊ Stranded filled loose tube diam. 2.4 mm with up to 12 fibers




➋ Central strength member

➌ Swellable nonwoven


➎ Inner sheath PE, colour ●■Black

➏ Armouring Corrugated steel cladding as highly

effective rodent protection

➐ Outer sheath PE, UV-resistant



Transport/storage

Installation

Operating temp.

–40 °C up to +70 °C

–10 °C up to +50 °C

–40 °C up to +60 °C


Min. bending radius static 15 x outer-Ø

dynamic 20 x outer-Ø

max. crush

strength

long-term 3000 N/dm


Brandverhalten







No. offibers

Outer diam.


Max. strain relief

Fire loadapprox.

Order no.


G62.5/125OM2e

G50/125OM3 bendable

G50/125OM4 bendable

G50/125OS2

E9…10/125

2x12 12.1 140 4000 4.97 1.38 LKD 8AB7 0406 0000 LKD 8AA2 0406 0000 LKD 8AA5 0406 0000 LKD 8AA7 0A06 0000 LKD 8AC7 0406 0000





GigaLine® Outdoor cable, stranded with sheath, 4000 N

Advantages

■■ optimally longitudinally and

transversally waterproof■■ more than twice the bandwidth


➊ ➌➍➎➋


Type KL-A-DF(ZN)(L)2Y nxm G/E

Application

Water-blocking gel-filled longitudinally and transversely water-

tight outdoor cable for installation directly in the ground, in

conduits and where there is a risk of rodent damage in MAN

(city networks) and LAN (campus/backbone). Suitable for use

in structured cabling acc. to ISO/IEC 11801 and EN 50173

(2nd edition). In keeping with the fiber type ideal for all appli-

cations from Classes OF 300 to OF 10000. Suitable for splicing.


trays or directly in the ground. Mechanical pulling in with

winches is only permitted in conjunction with force measuring

devices with a logging feature.

Construction

➊ Stranded filled loose tube diameter 2.4 mm with up to

12 fibers and blind elements, if applicable




➋ Central strength member

➌ Filling Water-blocking gel filling in twist cavities

of the cable core


➎ Outer sheath Aluminium sheath, resistant to UV rays

(aluminium tape with PE sheath)



Transport/storage

Installation

Operating temp.

–40 °C up to +70 °C

–5 °C up to +50 °C

–40 °C up to +60 °C






Fire performance







Office DataCenter Industry FO data cablesOffice Industry 41 GigaLine®


42GigaLine® FO connectivity

GigaLine®

FO connectivity


Office DataCenter Industry 43 GigaLine® FO connectivity

GigaLine® FO connectivity page

GigaLine® FO cabling systems 44

GigaLine® Trunk and splice boxes 47

o ■dc■ Fiber optic trunk box• telescopic trunk box• fixed trunk box

4849

o ■dc■ Fiber optic splice box• telescopic splice box• fixed splice box

5052

GigaLine® Compact – fiber optic distribution system 55

o ■dc■ Compact fiber optic rack 56

o ■dc■ Compact fiber optic module for pre-assembled breakout cables 57

o ■dc■ Compact fiber optic module for splicing solutions 58

GigaLine® Office and floor distributors 61

o ■ Fiber optic office and floor distributors• size A for up to 4 splice cassettesx• size B for up to 24 splice cassettes

6263

GigaLine® Fiber-To-The-Desk (FTTD) wall outlets 65

o ■ FTTD wall outlets• for surface mounting• for flush mounting

66

o ■ FTTD wall outlets• cable reservoir• splice tray for cable reservoir

67

o ■ FTTD outlet for cable ducts 68

o ■ FTTD mounting bracket for cable ducts 69

o ■ Office

dc■ DataCenter

i ■ Industry



GigaLine® is a perfectly coordinated system made up

of components optimised for performance and quality.

The interplay of high-quality fibers which far exceed the

standard and connectors with high-quality workmanship enable

maximum performance and range for the respective application

(GbE/10 GbE).

The system components are optimised to meet the

requirements for both distance and data rate. That is why LEONI

consistently uses its own j-fiber fibers (cables, pigtails, patch

cords).

Maximum transmission lengths for 10 Gigabit Ethernet system solutions.

OM2eOM3

bendableOM4

bendable OS2

Max. link length* 150 300 550 10.000

Attenuation budget** 1.8 dB 2.6 dB 2.6 dB 6.2 dB

Max. fiber attenuation 0.37 dB 0.75 dB 1.37 dB 3.6 dB

Number of possible connectors

6 8 6 12

Recommendedconnectors

LC, MTP/ MPO, SC

LC, MTP/ MPO, SC

LC, MTP / MPO,

SC

LC, SC

* Based on 10 GbE** All specifications are based on 850 nm or 1,310 nm

The GigaLine® system is determined by the application, required

link length and transmission protocol.

The table below shows the protocol-dependent attenuation

budget according to EN 50173-1 for the 10 Gigabit Ethernet pro-

tocol. From this is derived the number of possible connections

based on the overall link. The following harmonised compo-

nents were taken into consideration when putting together the

system:

■■ Fiber optic cables (GigaLine®) with laser/dispersion-optimised

multimode fibers that far exceed the standard and have

appropriate performance reserves (for fiber specifications see

section on GigaLine® fiber optic data cables)

■■ Fiber optic connectors with low insertion losses and high

return losses

GigaLine® FO cabling systems High-performance components for building a fiber optic infrastructure

The requirements for fibers and connectors differ depending on the field of application.

OM1e OM2 OM2e OM3 OM4 OS2

Industry SC, ST

Office LC, SC

DataCenter LC, MTP / MPO

Campus LC, SC

GigaLine® has components for every field of application.

Gig

aLin

e® w

all

outl

ets

Gig

aLin

e®

wal

l dis

trib

utor

s

Gig

aLin

e®

trun

k an

d sp

lice

boxe

s

Gig

aLin

e®

DCl

ink

Gig

aLin

e®

Com

pact

Industry

Office

DataCenter

Campus



Graph 1: System reserves of GigaLine® 150, 300 and 550 relative to the standard

Quality is our benchmark

Assembly of fiber optic connectors involves both adjustment

of the fibers in the ferrule as well as time-consuming grinding

and polishing. The aim here is to machine the connector so pre-

cisely by means of optimised processes that the insertion loss

and reflections are kept to a minimum. This is done by means of

PC polishing (PC = physical contact). Spherical polishing of the

ferrule spring mounted in the connector housing produces a

fiber/fiber transition at the end faces. In other words when two

connectors are plugged into one coupling, the spring pressure

pushes out all the air between the mating fibers of both connec-

tors. The glass/glass transition then has very low reflections and

low attenuation.

To maximise the performance of a PC connector, the surface

parameters of the connectors must be carefully checked during

the polishing process. The interferometer is an indicatory

measuring instrument for this. The overlaps of coherent light

waves are used to measure the quality of optical surfaces (fer-

rule surfaces).

The most important parameters are:■■ Apex offset

(offset between the highest point and the centre of the fiber)■■ Radius of the connector interface (fiber/ferrule)■■ Fiber height (undercut, protrusion)

These parameters are decisive for the long-term behaviour and

therefore the quality of a fiber optic connector.

Insertion loss of the connectors used in GigaLine® system components.

Fiber typeInsertion loss

typ.Return

loss

G62.5/125 OM1e 0.2 dB > 35 dB

G50/125 OM2e 0.2 dB > 35 dB

G50/125 OM3 bendable 0.2 dB > 35 dB

G50/125 OM4 bendable 0.2 dB > 35 dB

E9..10/125 OS2 0.2 dB > 50 dB

E9..10/125 OS2 APC 0.2 dB > 65 dB

Graph 1 shows the system reserves afforded by the high-quality

fibers and connectors in relation to EN 50173.

Decisive advantages of these system reserves are:■■ Longer transmission lengths for certain applications

(100 Mbit/s, 1 GbE, 10 GbE, 40 GbE, 100 GbE)■■ The option to insert more patch cords or splices■■ Additional attenuation caused by aging processes can be

curtailed■■ Network extensions can be realised with ease and a certain

level of assurance within the link lengths

GigaLine® BIMMF as well as patch and trunk cable

– the perfect combination

GigaLine® fiber optics are equipped with bend insensitive

OM3 and OM4 fibers (j-BendAble). That means significant added

value for you:■■ Greater reliability with higher packing density and installation

in constricted areas due to the low bending loss.■■ Low-risk patching in operation - the data transmission

remains constantly stable despite significant bending.■■ The doubled tensile strength of the fibers minimises the risk

of a fiber tear in the patch field (200 kpsi in comparison to the

standard with 100 kpsi).■■ Maximum security for a mix and match with fibers of other

manufacturers due to the minimum transition damping.

LEONI OM4 bendableLEONI OM3 bendableLEONI OM2eStandard OM3Standard OM2

Distance/km Attenuation-limited

operation

Dispersion-limited

operation

Bandwidth/MHz



GigaLine® Trunk and splice boxes Multifunctional housing technology, 19"

GigaLine® trunk and splice boxes can be used in all areas of

building data cabling. The construction of the components

ensures speed and reliability during initial installation,

maintenance and extension.

All boxes are pre-assembled ready to install and constructed so

that two cables can be inserted via cable glands or two divider

heads can be inserted from above. A breakout panel to which

the cables can be secured using cable ties is available as an

alternative.

Your guarantee for quick and reliable installation:■■ The box body is made from aluminium and therefore very light■■ The boxes are assembled ready to install■■ The permissible bending radii as well as ease of installation

are guaranteed even with high packing densities■■ The telescopic version offers the advantage that all compo-

nents are easily accessible for testing and maintenance work

GigaLine® trunk and splice box:■■ Boxes with one rack unit as fixed installation or telescopic

version■■ Boxes with two rack units are always telescopic■■ The front panel is made from galvanised steel panel and

Light grey RAL 7035, powder coated ■■ One rack unit can be equipped with up to

24 x SC Duplex, 24 x LC Duplex, 24 x MT-RJ, 24 x E 2000,

24 x ST, 24 x FC couplings



Multimode

Number of fibers

SC Duplex, beigePlastic/PhBz

LC Duplex, beigePlastic/PhBz

LC Duplex, aquaPlastic/Cer

LC Duplex, heather violet Plastic/Cer

E2000, beigePlastic/Cer

6 LKD 9D32 A022 0000 LKD 9D32 A032 0000 LKD 9D32 A178 0000 LKD 9D32 A181 0000 LKD 9D32 A036 0000



48 LKD 9D32 A024 0000 LKD 9D32 A035 0000 LKD 9D32 A177 0000 LKD 9D32 A184 0000

Other configurations available on request

GigaLine® Trunk box telescopic

Description

Telescopic fiber optic patch panel for pre-assembled trunk

cables. Suitable for terminating up to 48 optical fibers.

Construction

Box

Front panel and

mounting bracket

Capacity

Labelling

Dimensions

Weight

Aluminium, with dust protective cover

telescopic and removable drawer, depth

continuously adjustable by up to 50 mm

Galvanised steel panel, powder coated

Colour: Grey RAL 7035

Installation of up to 2 trunk cables

Channel 1–12 / 1–24 (screen printing)

A/B coding with SC/ST/FC configuration

19" / 1 RU

44 mm x 483 mm x 220 mm (HxWxD)

approx. 1.7 kg

Configuration

Equipment

Couplings

available with up to 24 slots

SC Duplex, FC-PC/FC-APC, ST

E2000/E2000 HRL, MTRJ, LC Duplex

Accessories (optional)

Breakout panel for securing cables using cable ties

Singlemode

Number of fibers

SC DuplexMet/Cer

SC Duplex, bluePlastic/Cer

LCD, bluePlastic/Cer

E2000, bluePlastic/Cer

E2000HRL, greenPlastic/Cer




48 LKD 9D32 A095 0000 LKD 9D32 A006 0000 LKD 9D32 A016 0000

Designation Order no.

GigaLine® Telescopic trunk box see table

Breakout panel LKD 9D60 0000 0000

GigaLine® Fiber optic trunk boxBox 19" / 1 RU, telescopic or fixed

Advantages

■■ light as a feather■■ easy to install


Office DataCenter IndustryOffice DataCenter 49 GigaLine® FO connectivity

Multimode

Number of fibers




LC Duplex, heather violetPlastic/Cer







Singlemode

Number of fibers

SC DuplexMet/Cer








48 LKD 9D42 A047 0000 LKD 9D42 AXXX 0000 LKD 9D42 A001 0000

GigaLine® Trunk box fixed

Description

Fiber optic patch box for pre-assembled trunk cables.

Suitable for terminating up to 48 optical fibers.

Construction

Box

Front panel

Capacity

Labelling

Dimensions

Weight


Galvanised steel panel, powder coated


Installation of up to 2 trunk cables



19" / 1 RU


approx. 1.4 kg

Configuration

Equipment

Couplings


SC Duplex, FC-PC/FC-APC, ST





GigaLine® Smart trunk, fixed see table


Advantages

■■ light as a feather■■ easy to install



GigaLine® Splice box telescopic

Description

Telescopic fiber optic patch panel for up to 48 optical fibers.

For terminating fiber optic transmission links with pigtails.

Construction

Box

Front panel and

Mounting bracket

Pigtails

Labelling

Dimensions

Weight


telescopic and removable drawer, depth

continuously adjustable by up to 50 mm

Galvanised steel panel, powder coated,


Pigtails ready for splicing and plugged in

(colours acc. to DIN IEC 60304)



19" / 1 RU


approx. 1.8 kg

Optical characteristics

Insertion loss typ.

Return loss typ.

for all fiber types 0.2 dB

G62.5/125 OM1e > 35 dB

G50/125 OM2e > 35 dB

G50/125 OM3 > 35 dB

G50/125 OM4 > 35 dB

E9..10/125 OS2 > 50 dB

E9..10/125 OS2 APC > 65 dB

Configuration

Equipment

Couplings


SC Duplex, FC-PC/FC-APC, ST,


Accessories

1 x M20 cable gland

Splice cassette

Crimp splice protective holder




GigaLine® Telescopic splice box see table


GigaLine® Fiber optic splice boxBox 19" / 1 RU, telescopic

Advantages

■■ light as a feather■■ easy to install■■ best optical

properties



Singlemode OS2 E9..10/125

Number of fibers

SC DuplexMet/Cer








48 LKD 9D31 A096 0000 LKD 9D31 A006 0000 LKD 9D31 A017 0000

Multimode OM1e G62.5/125

Number of fibers


LCD, beigePlastic/PhBz

6 LKD 9D31 A078 0000 LKD 9D31 A089 0000

12 LKD 9D31 A079 0000 LKD 9D31 A090 0000

24 LKD 9D31 A080 0000 LKD 9D31 A091 0000

48 LKD 9D31 A081 0000 LKD 9D31 A092 0000

Multimode OM2e G50/125

Number of fibers

SC Duplex, beige Met/Cer




6 LKD 9D31 AXXX 0000 LKD 9D31 A024 0000 LKD 9D31 A035 0000 LKD 9D31 A039 0000



48 LKD 9D31 AXXX 0000 LKD 9D31 A027 0000 LKD 9D31 A038 0000

Multimode OM3 G50/125

Number of fibers

SC Duplex, beigeMet/Cer


LCD, aquaPlastic/Cer





48 LKD 9D31 A001 0000 LKD 9D31 A045 0000 LKD 9D31A281 0000


Number of fibers

SC Duplex, beigeMet /Ker


LCD, heather violetPlastic/Cer




24 LKD 9D31 A229 0000 LKD 9D31 A062 0000 LKD 9D31 AXXX 0000 LKD 9D31 A077 0000

48 LKD 9D31 A230 0000 LKD 9D31 A063 0000 LKD 9D31 AXXX 0000



52GigaLine®

Advantages

■■ light as a feather■■ easy to install■■ best optical

properties

FO connectivity

GigaLine® Splice box fixed

Description

Fiber optic patch panel, for up to 48 optical fibers.

For terminating fiber optic transmission links with pigtails.

Construction

Box

Front panel

Pigtails

Labelling

Dimensions

Weight

Aluminium with dust protective cover

Galvanised steel panel,


Pigtails ready for splicing and plugged in




19" / 1 RU


approx. 1.5 kg


Insertion loss typ.

Return loss typ.


G62.5/125 OM1e > 35 dB

G50/125 OM2e > 35 dB

G50/125 OM3 > 35 dB

G50/125 OM4 > 35 dB

E9..10/125 OS2 > 50 dB

E9..10/125 OS2 APC > 65 dB

Configuration

Equipment

Couplings


SC Duplex/SC Duplex, FC-PC, FC-PC(HRL)

(SM) , ST/ST, E2000/E2000, E2000HRL/

E2000HRL (SM), MT-RJ/MT-RJ (MM),

LC Duplex

Accessories

1 x M20 cable gland

Splice cassette





GigaLine® Splice box, fixed see table


GigaLine® Fiber optic splice boxBox 19" / 1 RU, fixed




Number of fibers

SC Duplex, blueMet/Cer

SC Duplex, bluePlastic/PhBz



6 LKD 9D41 A100 0000 LKD 9D41 AXXX 0000 LKD 9D41 A018 0000 LKD 9D41 A021 0000



48 LKD 9D41 A159 0000 LKD 9D41 AXXX 0000


Number of fibers





6 LKD 9D41 AXXX 0000 LKD 9D41 A065 0000 LKD 9D41 A074 0000 LKD 9D41 AXXX 0000



48 LKD 9D41 AXXX 0000 LKD 9D41 AXXX 0000


Number of fibers








48 LKD 9D41 AXXX 0000 LKD 9D41 A147 0000 LKD 9D41 A166 0000


Number of fibers



LCD, aquaPlastic/Cer





48 LKD 9D41 AXXX 0000 LKD 9D41 AXXX 0000 LKD 9D41 A232 0000


Number of fibers



LCD, heather violetPlastic/Cer


6 LKD 9D41 AXXX 0000 LKD 9D41 A050 0000 LKD 9D41 AXXX 0000 LKD 9D41 A062 0000



48 LKD 9D41 AXXX 0000 LKD 9D41 AXXX 0000 LKD 9D41 A234 0000




GigaLine® Compact is a user-friendly fiber optic distribution

system that can be configured with up to 144 fibers with con-

ventional couplings such as SC, ST, E 2000 and with 288 fibers

with LC Duplex couplings.

The system combines compactness with optimum fiber optic

management. GigaLine® Compact is ideal for applications where

space is tight and maximum flexibility is required.

GigaLine® Compact rack with excess-length drawer 3+1 RU■■ Width: 19"/84 HP■■ Height 4 RU (3 RU rack + 1 RU excess-length drawer)■■ Can be configured with up to 12 modules■■ Excess-length drawer can be pulled out towards the rear,

for holding loose tube reserves and securing the fiber optic

cables, alternatively up to 6 pre-assembled trunk cables with

up to 48 fibers can be secured using cable glands■■ Management panel for patch cord routing and adherence

to the bending radii

GigaLine® Compact module 3 RU/7 HP■■ For up to 24 fibers■■ Available with up to 12 couplings■■ Configured with SC Duplex, ST, E2000, FC-PC, MT-RJ

or LC Duplex couplings■■ Front panel: Aluminium, with mounting screws■■ Including splicing cassette and excess-length cassette■■ Buffered fiber pigtails are inserted, stripped and coloured

(primary and secondary coating) acc. to the DIN IEC 60304

colour code ready for splicing for fast and secure installation■■ Fiber qualities: OM1e, OM2e, OM3, OM4 and OS2■■ The couplings can be retrofitted at any time

GigaLine® rack with excess-length drawer 3+1 RU

GigaLine® Compact module 3 RU, 7 HP

GigaLine® Compact – fiber optic distribution systemfor maximum packing density and flexibility



GigaLine® Compact rack

Description

Rack with 84 HP. The excess-length drawer for the loose tubes

can be pulled out to the rear. Max. 6 trunk cables with 48 fibers

each can be inserted from above or up to 12 loose tube cables

with max. 288 fibers can be inserted from the front.

Construction

Box

Excess-length

drawer

Dimensions

Aluminium with permanently installed

runners for the built-in modules

For clear organisation of the

loose tube reserves and securing,

can be pulled out to the rear

19" / 4 RU


Accessories

1 x M20 cable gland

5 x patch cord routing


GigaLine® Compact rack LKD 9D50 0000 0000

Loose tube guide plate LKD 9D50 0005 0000

Dummy front panel 7 HP LKD 9D50 0004 0000

Loose tube guide plate

Rack – rear view

Rack for GigaLine® trunk cables – rear view


Loose tube guide

plate

Dummy front panel

7HP

To protect the loose tubes on the rear,

especially in open racks

To close off unused

module slots

GigaLine® Compact fiber optic rackwith mounted excess-length drawer 3+1 RU

Advantages

■■ for high packing

densities ■■ clearly laid out

cable management


Office DataCenter IndustryOffice DataCenter 57 GigaLine®

GigaLine® Compact trunk module

Description

Built-in module, available with 3, 6 and 12 slots.

Including excess-length cassette.

Construction

Module rack

Front panel

Capacity

Dimensions

Aluminium

Aluminium, with mounting screws

for up to 24 fibers

7 HP / 1 RU


Configuration

Couplings SC Duplex, ST, E2000, FC-PC, MT-RJ,

LC Duplex , LC-Quad

Accessories

Labelling strips

Cable ties

FO connectivity

Singlemode

Number of fibers




6 LKD 9D52 0000 0000 LKD 9D52 0008 0000 LKD 9D52 0011 0000

12 LKD 9D52 0001 0000 LKD 9D52 0009 0000 LKD 9D52 0012 0000

24 LKD 9D52 0010 0000 (LC-Quad)

Multimode

Number of fibers





6 LKD 9D52 0016 0000 LKD 9D52 0024 0000 LKD 9D52 0XXX 0000 LKD 9D52 0XXX 0000

12 LKD 9D52 0017 0000 LKD 9D52 0025 0000 LKD 9D52 0XXX 0000 LKD 9D52 0XXX 0000

24 LKD 9D52 0026 0000 (LC-Quad) LKD 9D52 0036 0000 (LC-Quad) LKD 9D52 0037 0000 (LC-Quad)

Further connectors available on request

GigaLine® Compact fiber optic moduleBuilt-in module for pre-assembled breakout cables, 3 RU / 7 HP



GigaLine® Compact splice module

Description

Built-in module, available with 3, 6 and 12 slots.

Including splice cassette and excess-length cassette.

The buffered fiber pigtails are inserted, stripped and coloured

(primary and secondary coating) acc. to the DIN IEC 60304

colour code ready for splicing for fast and secure installation.

Construction

Module rack

Front panel

Pigtails

Dimensions

Aluminium

Aluminium, with mounting screws

Up to 24 pigtails ready for splicing

and plugged in


7 HP / 1 RU



Insertion loss typ.

Return loss typ.


G62.5/125 OM1e > 35 dB

G50/125 OM2e > 35 dB

G50/125 OM3 > 35 dB

G50/125 OM4 > 35 dB

E9..10/125 OS2 > 50 dB

E9..10/125 OS2 APC > 65 dB

Configuration

Couplings The couplings can be retrofitted

at any time

Accessories

Labelling strips

Cable ties for securing the loose tubes


Protective tube for loose tubes 90 cm

GigaLine® Compact fiber optic moduleBuilt-in module for splicing solutions

Advantages

■■ best optical

properties



Singlemode OS2 E9.. 10/125

Number of fibers

SC Duplex, blueMet/Cer

LC Duplex, bluePlastic/Cer


6 LKD 9D51 0003 0000 LKD 9D51 0010 0000 LKD 9D51 0014 0000

12 LKD 9D51 0036 0000 LKD 9D51 0011 0000 LKD 9D51 0015 0000

24 LKD 9D51 0012 0000 (LC-Quad)


Number of fibers

SC DuplexPlastic/PhBz

LC DuplexPlastic/PhBz

6 LKD 9D51 0071 0000 LKD 9D51 0077 0000

12 LKD 9D51 0072 0000 LKD 9D51 0078 0000

24 LKD 9D51 0079 0000 (LC-Quad)


Number of fibers


LC DuplexPlastic/PhBz

6 LKD 9D51 0023 0000 LKD 9D51 0029 0000

12 LKD 9D51 0024 0000 LKD 9D51 0030 0000

24 LKD 9D51 0031 0000 (LC-Quad)


Number of fibers



6 LKD 9D51 0039 0000 LKD 9D51 0095 0000

12 LKD 9D51 0040 0000 LKD 9D51 0096 0000

24 LKD 9D51 0092 0000 (LC-Quad)


Number of fibers



6 LKD 9D51 0055 0000 LKD 9D51 00XX 0000

12 LKD 9D51 0056 0000 LKD 9D51 XXXX 0000

24 LKD 9D51 0093 0000 (LC-Quad)

Further configurations on request


Office DataCenter IndustryOffice 61 GigaLine® FO connectivity

Network installations are increasingly being implemented

with disturbance-proof fiber optic systems technology with

future capabilities. This allows EMC problems as well as dif-

ferent earthing potentials to be avoided for cabling reaching

through whole buildings.

When a fiber optic cabling system with a star structure is used

in a building, the long ranges involved make it possible to

dispense with active components on the individual floors. 19"

distributor cabinets and separate security areas (rooms) as well

as the associated power supply are no longer necessary.

The space-saving office and floor distributors are perfectly

suited for the transitions from high-fiber backbone cables to

breakout cables for workplace cabling. They are easy to install

and offer space-saving organisation and optimum protection

for fiber optic systems engineering.

GigaLine® stands for a high degree of flexibility:■■ The GigaLine® office and floor distributors can be optionally

equipped with splice cassettes and/or distributor plates for

holding fiber optical couplings■■ Later modifications to the components used are possible

at any time■■ Holds up to 288 fibers■■ The buffered fiber pigtails are coloured acc. to the DIN IEC

60304 colour code for fast and reliable installation■■ The pigtail buffered fibers in the splice cassette are stripped

and ready for splicing■■ The incoming and outgoing fiber optic cables are fixed

to a strain relief strip in the housing■■ The cable entries are sealed via brush strips or PG cable glands■■ Housings have one removable/lockable swing door■■ Housing colour: Light grey RAL 7035

GigaLine® office and floor distributor

➔ Are tailored to the customer's requirements and supplied

fully assembled

➔ Are available in 2 sizes

Basement

GigaLine® Office and floor distributorsMultifunctional housing for FTTD/FTTO cabling

Office 1 Office 2 Office 3

Office 4 Office 5 Office 6 Office 7



GigaLine® Fiber optic office and floor distributorsWall distributor for up to 4 or 24 splice cassettes

Advantages

■■ space-saving■■ universal use


GigaLine® Wall distributor, size A with 4 splice cassettes and 24 strip brushes

LKD 9D71 0009 0000

additional equipment on request

GigaLine® Wall distributor size A

Application

Space-saving distributor cabinets for Fiber-To-The-Office or

Fiber-To-The-Desk cabling systems. Suitable for distributing

up to 24 channels (48 fibers).

Features

For up to 4 splice cassettes with a total of 48 fibers. The buffered

fiber pigtails are inserted, stripped and coloured acc. to the DIN

IEC 60304 colour code (primary and secondary coating) ready

for splicing for fast and reliable installation.

Construction

■■ Powder-coated steel panel, colour Light grey RAL 7035■■ Cable entry from above and below possible■■ 4 cable entries either as M20/M25 or strip brush■■ Door with lock or bolt■■ Weight approx. 4 kg

Dimensions

Size A 300 mm x 300 mm x 85 mm (H x W x D)

Configuration

Optionally only with couplings for pre-assembled trunks,

as splice box or combined

Accessories

Up to 4 splice cassettes

With crimp splice protective holder, buffered fiber strain relief

and cover

Up to 24 couplings: LCD, SCD or E2000



Advantages

■■ space-saving■■ universal use


GigaLine® Wall distributor, size B with 12 splice cassettes, 3 strip brushesand an insertion plate

LKD 9D71 0163 0000

additional equipment on request

GigaLine® Wall distributor size B

Application

Space-saving distributor cabinets for Fiber-To-The-Office or

Fiber-To-The-Desk cabling systems. Suitable for distributing

up to 144 channels (288 fibers).

Features

For up to 24 splice cassettes for up to 288 fibers. The buffered

fiber pigtails are inserted, stripped and coloured (primary and

secondary coating) acc. to the DIN IEC 60304 colour code ready

for splicing for fast and secure installation.

Construction

■■ Powder-coated steel panel, colour Light grey RAL 7035■■ Cable entry from above and below possible■■ 4 cable entries either as M20/M25 or strip brush ■■ Door with lock or bolt■■ Weight approx. 7 kg

Dimensions

Size B 600 mm x 425 mm x 220 mm (H x W x D)

Configuration

See distributor A

Accessories

Up to 24 splice cassettes with crimp splice protective holder,

buffered fiber strain relief and cover

or up to 96 ST or LCD couplings

or up to 48 SCD couplings with the corresponding number

of splice cassettes



3020 25 35

100

10 000

1

0,01

0,0001

1510

Lebe

nsda

uer (

Jahr

e)

Biegeradius (mm)

25 Jahre

GigaLine® flush-mounted outlet

GigaLine® Fiber-To-The-Desk (FTTD) wall outlets

Compact fiber optic connectivity – high performance, immu-

nity to disturbances, future capabilities

Of course, the GigaLine® system also includes comprehensive

solutions for fiber-to-the-desk. Here it is possible to use a wide

range of wall outlets with the corresponding installation materi-

als for surface mounting and installation in ducts.

As a result of a specific outlet design, bending never goes below

the admissible bending radii of the fibers, thus ensuring that

the fiber keeps its full functionality even in the long term: ■■ A defined bending radius for the fiber ensures the service life■■ An effective strain relief for cables and pigtails and clean

guidance within the outlet ensure minimum strain on the

fiber and preservation of the physical characteristics■■ The dimensions of the outlets are as small as possible

GigaLine® flush-mounted outlet

The flush-mounted outlet can be installed in ducts or,

as the name suggests, mounted flush.

Special features:■■ Can be equipped with up to two duplex or four simplex cou-

plings■■ Possible types of coupling:

SC Duplex, ST Simplex, E 2000, LC Duplex■■ The bending radius of the fiber of at least 30 mm is ensured

by the cable reservoir and the cable guide■■ The outlet has a downward inclination of 10°. This ensures

optimum protection against mechanical stress■■ The universal carrying frame is compatible with usual moun-

ting cups■■ All current connecting techniques are supported:

➔ Assembly of fiber optic plugs on site

➔ Use of pre-assembled cables

➔ Splicing of buffered fiber pigtails

– 5 loops

– 4 loops

– 3 loops

– 2 loops

– 1 loop



GigaLine® Wall outlet for surface mounting

Features

Wall outlet for surface mounting.

■■ Downward outlet direction ■■ Splice tray for four splices■■ For 2 SC Duplex or LC Quad couplings■■ Cover with screw as access protection■■ Cable entry for 3–10 mm cables■■ Adherence to the bending radii of approx. 30 mm

thanks to guided fiber paths


Insertion loss typ.

Return loss typ.

G50/125 OM3/4 0.2 dB

E9..10/125 OS2 0.2 dB

G50/125 OM3/4 > 35 dB

E9..10/125 OS2 > 50 dB (PC)

> 65 dB (APC)

Dimensions


Accessories

Cable ties, coupling protection, wall mounting set

GigaLine® Wall outlet for flush mounting

Features

Wall outlet for mounting in ducts and for underfloor mounting.

■■ Downward outlet direction (at an angle of 10°)■■ Termination of up to 4 fibers■■ Bending radius > 30 mm in combination with cable reser-

voir KR or cable guide KF■■ Colour: Oyster white RAL 1013


Insertion loss typ.

Return loss typ.

G50/125 OM3/4 0.2 dB

E9..10/125 OS2 0.2 dB

G50/125 OM3/4 > 35 dB

E9..10/125 OS2 > 50 dB (PC)

> 65 dB (APC)

Dimensions


Scope of delivery

Equipped with 2 fiber optic couplings

With labelling insert (enclosed)

Designa-tion

ConfigurationOrder no.

OS2 E9..10/125 OM3 G50/125

GigaLine® wall outlet forsurface mounting(1 piece)

SC Duplex Plastic/Cer LKD 9D71 0020 0000 —

SC Duplex Plastic/PhBz — LKD 9D71 0021 0000

LC Quad Plastic/Cer LKD 9D71 0022 0000 —

LC Quad Plastic/PhBz — LKD 9D71 0023 0000

without pigtails

GigaLine® wall outlet forsurface mounting(1 piece)

SC Duplex Plastic/Cer LKD 9D72 0020 0000

SC Duplex Plastic/PhBz LKD 9D72 0021 0000

LC Quad Plastic/Cer LKD 9D72 0022 0000

LC Quad Plastic/PhBz LKD 9D72 0023 0000

Designation Configuration Order no.

GigaLine® wall outlet for flush mounting(1 piece)

2 LC Duplex Plastic/PhBz LKD 9FK0 3026 0000

2 SC Duplex Plastic/PhBz LKD 9FK0 3003 0000

2 SC Duplex Met/Cer LKD 9FK0 3006 0000

4 ST Simplex Met /PhBz LKD 9FK0 3001 0000

GigaLine® FTTD wall outletsfor surface / flush mounting

GigaLine® Cable reservoir KR

Features

For flush-mounted outlet to hold excess cable lengths in

the duct and/or safety reserves (up to 4 x 1 m for an overall

diameter of 3 mm).

■■ Min. bending radius > 30 mm■■ Direction-independent cable entry with cable tie strain relief

on entry and exit side

Dimensions

76 mm x 151 mm x 50 / 55 mm (HxWxD)

50 mm installation depth (KR50), 55 mm installation depth (KR55)

GigaLine® Splice tray for cable reservoir KR

Features

For storing fiber optic splices when splicing plug pigtails.

The separate storage of splice reserve and working reserve

protects the sensitive splice area.

■■ Can be equipped with one or two splice holders for 4 fusion

splices or mechanical splice connectors ■■ Snaps into cable reservoir KR


GigaLine® Cable reservoir KR50 (1 piece) LKD 9FK0 3007 0000

GigaLine® Cable reservoir KR55 (1 piece) LKD 9FK0 3008 0000


GigaLine® Splice tray for cable reservoir KR (1 piece) LKD 9FK0 3029 0000



GigaLine® FTTD wall outletsCable reservoir / splice tray



Designation Configuration Order no.

GigaLine® Outlet EK for cable ducts (1 piece)

1 LC Quad Plastic/PhBz LKD 9FK0 3031 0000

1 SC Duplex Plastic/PhBzr LKD 9FK0 3012 0000

GigaLine® FTTD outlet for cable ductsfor installation in ducts

GigaLine® Outlet EK for cable ducts

Features

Extremely compact outlet for horizontal or vertical installation

in ducts.

Termination of 1 duct/2 fibers.

■■ Outlet direction: Downwards at an angle of 45°,

defined bending radius in conjunction with suitable

mounting bracket MH■■ Strain relief using cable ties■■ Central plate 50 mm x 50 mm

General characteristics

■■ Can be equipped with 1 duplex coupling

or 2 simplex couplings■■ Possible types of coupling: SC Duplex, E 2000, LC Quad■■ The integrated cable guide guarantees adherence to the

minimum bending radius■■ The universal central plate can be combined with various

switch ranges■■ Both cables with pre-assembled plugs

and plugs assembled on site can be used




GigaLine® horizontal mounting bracket MH50 (1 piece) LKD 9FK0 3014 0000

GigaLine® horizontal mounting bracket MH55 (1 piece) LKD 9ZK0 3015 0000

GigaLine® vertical mounting bracket MH50 (1 piece) LKD 9FK0 3016 0000

GigaLine® vertical mounting bracket MH55 (1 piece) LKD 9ZK0 3017 0000

Mounting bracket MH for horizontal installation

Mounting bracket MH for vertical installation

GigaLine® FTTD mounting bracket for installation in ductsfor outlet EK for cable ducts

GigaLine® Mounting bracket MH

Features

For space-saving installation of the outlet EK for cable ducts.

The mounting bracket is easy to install and guarantees

adherence to the required bending radii.

■■ Bracket for horizontal or vertical installation with 50 mm

and 55 mm installation depths available

Mounting options

T-slot mounting Horizontal or vertical,

fits ducts from Thealit, OBO/Better-

mann, ASYCO and Alusor

Design

Height 50 mm (MH50)

Height 55 mm (MH55)


70GigaLine® FO patch cords / trunk cables

GigaLine®

FO patch cords / trunk cables


Office DataCenter Industry 71 GigaLine®FO patch cords / trunk cables

GigaLine® FO patch cords / trunk cables page

GigaLine® FO patch cords 72

o ■dc■ Fiber optic patch cord, breakout 72

o ■dc■ Fiber optic patch cord, LC/PC-Uniboot 74

dc■FO patch cords MTP

• MTP I-F(ZN)H 1x12 • MTP I-F(ZN)HH 2x12

75

GigaLine® Trunk – pre-assembled trunk cables 77

o ■dc■ Fiber optic trunk cable, Mini-Breakout 78

o ■dc■ i ■ Fiber optic trunk cable, breakout 80

i ■ Fiber optic trunk cable, outdoor 82

o ■dc■ i ■ Fiber optic trunk cable, universal 84

o ■ Office

dc■ DataCenter

i ■ Industry



GigaLine® Patch Figure 0

Construction

Buffered fiber

Strain relief

Cable sheath

Sheath colour

Dimensions

Two semi-tight buffered fibers with strain

relief as breakout elements (diam. 2.1 mm)

running parallel under one outer sheath

Colour: Orange (multimode),

yellow (singlemode)

Aramid

Halogen-free, flame-retardant compound

OM1e, OM2, OM2e ●■Orange

OS2 ●■Yellow

OM3 ●■Aqua


Outer cable diameter 3.1 x 5.2 mm


Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–10 °C up to +70 °C


Bending radius

(over flat side)




single element 30 mm | 15 mm

Optical characteristics (typical)

Insertion loss

Return loss


G62.5/125 OM1e > 35 dB

G50/125 OM2e > 35 dB

G50/125 OM3 > 35 dB

G50/125 OM4 > 35 dB

E9..10/125 OS2 > 50 dB

E9..10/125 OS2 APC > 65 dB

Fire performanceFlame retardancy

Halogen free

Smoke density

IEC 60332-1 / IEC 60332-3-22, Cat. A

IEC 60754-1

IEC 61034

Breakout patch cord OS2equipped with LC Duplex, SC Duplex, SC Simplex, E-2000 Simplex

GigaLine® Fiber optic patch cord, breakoutType KL-I-V(ZN)HH

Advantages

■■ robust with dual

cable sheath■■ fiber type

recognisable

on the cladding■■ best optical

properties

Outer sheath

Strain relief

Tight buffered fiber

Subcable sheath

Lengthm

OM1eG62.5/125 µm

OM2eG50/125 µm

OM3G50/125 µm

OM4G50/125

OS2E9..10/125

Configuration ST-ST (IEC 61754-2)

1.0 LKD 9A12 0290 0000 LKD 9A11 0238 0000 – – LKD 9A13 0237 0000

1.5 LKD 9A12 0291 0000 LKD 9A11 0239 0000 – – LKD 9A13 0238 0000

2.0 LKD 9A12 0403 0000 LKD 9A11 0240 0000 – – LKD 9A13 0239 0000

2.5 LKD 9A12 0292 0000 LKD 9A11 0241 0000 – – LKD 9A13 0240 0000

3.0 LKD 9A12 0404 0000 LKD 9A11 0242 0000 – – LKD 9A13 0241 0000

5.0 LKD 9A12 0293 0000 LKD 9A11 0243 0000 – – LKD 9A13 0242 0000

7.5 LKD 9A12 0294 0000 LKD 9A11 0244 0000 – – LKD 9A13 0243 0000

10.0 LKD 9A12 0295 0000 LKD 9A11 0245 0000 – – LKD 9A13 0244 0000

Configuration SC Duplex–SC Duplex (IEC 61754-4)

1.0 LKD 9A12 0265 0000 LKD 9A11 0201 0000 LKD 9A11 1042 0000 LKD 9A11 1111 0000 LKD 9A13 0768 0000








Configuration LC Duplex–LC Duplex (IEC 61754-20)










Office DataCenter IndustryOffice DataCenter 73 GigaLine®FO patch cords / trunk cables


74GigaLine®

GigaLine® Patch LCD-Uniboot OS2GigaLine® Patch LCD-Uniboot OM3GigaLine® Patch LCD-Uniboot OM4

Construction

Cable type

Buffered fiber

Strain relief

Cable sheath

Sheath colour

Cable diameter

KL-I-V(ZN)H

Two semi-tight buffered fibers under a

common sheath (round diam. 2.8 mm)

Aramid


OM1e, OM2, OM2e ●■Orange

OS2 ●■Yellow

OM3 ●■Aqua


2.8 mm


Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–10 °C up to +70 °C


Bending radius

Tensile strength




300 N


Insertion loss

Return loss

Laser bandwidth

< 0.4 dB 0.2 dB (typical)

Patch cord OS2 > 50 dB (PC)

> 65 dB (APC)

Patch cord OM3/OM4 > 35 dB

Patch cord OM3 1,500 MHz x km

Patch cord OM4 4,700 MHz x km


Halogen free

Smoke density

IEC 60332-1 / IEC 60332-3-22, Cat. A

IEC 60754-1

IEC 61034

ConfigurationLC Duplex Uniboot

KabellängeSee table, other plug types and lengths on request

FO patch cords / trunk cables

GigaLine® Patch LCD-Uniboot

OS2 E9..10/125 GigaLine® Patch LCD-Uniboot

OM3 G50/125 GigaLine® Patch LCD-Uniboot

OM4 G50/125

Lengthm

Configuration 2 x LC Duplex Uniboot Configuration 2 x LC Duplex Uniboot Configuration 2 x LC Duplex Uniboot

1.0 LKD 9A13 0713 0000 LKD 9A11 0866 0000 LKD 9A11 0875 0000

2.0 LKD 9A13 0715 0000 LKD 9A11 0868 0000 LKD 9A11 0877 0000

3.0 LKD 9A13 0717 0000 LKD 9A11 0870 0000 LKD 9A11 0879 0000

5.0 LKD 9A13 0718 0000 LKD 9A11 0871 0000 LKD 9A11 0880 0000

7.5 LKD 9A13 0719 0000 LKD 9A11 0872 0000 LKD 9A11 0881 0000

10.0 LKD 9A13 0720 0000 LKD 9A11 0873 0000 LKD 9A11 0882 0000

Uniboot patch cord OM3 equipped with 2 x LC DuplexUniboot

Uniboot patch cord OM4equipped with 2 x LC DuplexUniboot

Uniboot patch cord OS2equipped with 2 x LC DuplexUniboot

GigaLine® Fiber optic patch cord, LC/PC-UnibootType KL-I-V(ZN)H

Advantages

■■ lowest space

requirements■■ very flexible■■ no preferred

bending direction■■ fiber type

recognisable


properties


Office DataCenter Industry 75 GigaLine®FO patch cords / trunk cablesOffice DataCenter

GigaLine® Patch MTP I-F(ZN)H 1x12 GigaLine® Patch MTP I-F(ZN)HH 2x12

Description

Connection-ready MTP patch cord – assembled

at both ends with one or two MTP plugs (female) or one MTP

(female) to six LC Duplex Uniboot plugs.

Construction

Cable type

Strain relief

Cable sheath

Sheath colour

Cable diameter

KL-I-F(ZN)H 1x1 or

KL-I-F(ZN)HH 2x12

Aramid


OM2 ●■Yellow | OM3 ●■Aqua |


3.0 mm (bei 1x12)

8.9 mm (bei 2x12)


■■ In DataCenters as a patch cord for applications acc. to

ISO/IEC 11801 and EN 50173 (2nd edition) ■■ GigaLine® Patch MTP–6LCDU (fanout) for multimode applica-

tions via two fibers (up to 10GBASE-SR) ■■ GigaLine® Patch 1MTP–1MTP for multimode applications

via 2 x 4 fibers (40GBASE-SR4) ■■ GigaLine® Patch 2MTP–2MTP for multimode applications

via 2 x 10 fibers (100GBASE-SR10)


Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–10 °C up to +70 °C


Bending radius

KL-I-F(ZN)H 1x12

KL-I-F(ZN)HH 2x12

Single element

Tensile strength

KL-I-F(ZN)H 1x12

KL-I-F(ZN)HH 2x12






see KL-I-F(ZN)H 1x12

300 N

600 N

Optical characteristics (typical)

Insertion loss

Return loss

0.3 dB (MTP) for all fiber types

0.2 dB (LCDU) for all fiber types

OM3/OM4 > 20 dB (MTP)

OM3/OM4 > 40 dB (LCDU)


Halogen free

Smoke density

IEC 60332-1 / IEC 60332-3-22, Cat. A

IEC 60754-1

IEC 61034

Designation Configuration side A Configuration side B Order no.Wiring (1:1)

Order no.Wiring(X)

GigaLine® Patch 12

OM3 6 LCD–MTP* 6x LC duplex Uniboot OM3 MTP female 12 OM3 — — LKD 9R72 1xxx 0000KBG00003

OM4 6 LCD–MTP* 6x LC duplex Uniboot OM4 MTP female 12 OM4 — — LKD 9R72 4xxx 0000

OM3 MTP–MTP* MTP female 12 OM3 MTP female 12 OM3 LKD 9R73 6xxx 0000

KBG00005

LKD 9R73 5xxx 0000

KBG00004OM4 MTP–MTP* MTP female 12 OM4 MTP female 12 OM4 LKD 9R73 nxxx 0000 LKD 9R73 3xxx 0000

GigaLine® Patch 2x12

OM3 2xMTP–2xMTP* 2x MTP female 12 OM3 2x MTP female 12 OM3 LKD 9R73 xxxx 0000 LKD 9R7n nxxx 0000

OM4 2xMTP–2xMTP* 2x MTP female 12 OM4 2x MTP female 12 OM4 LKD 9R73 nxxx 0000 LKD 9R73 4xxx 0000

* crossed xxx = Length in m. 1 piece per packing unit.

GigaLine® FO patch cords MTP MTP / MPO patch cordType KL-I-F(ZN)H / KL-I-F(ZN)HH

Advantages

■■ lowest space

requirements■■ very flexible■■ no preferred

bending direction■■ fiber type

recognisable


properties


Office DataCenter Industry 77 GigaLine®FO patch cords / trunk cablesOffice DataCenter Industry

GigaLine® Trunk – pre-assembled trunk cablesSafely through "thick and thin"

Ready-to-connect units are at the heart of our fiber optic

system technology. Our pre-assembled cables (GigaLine®

trunk cables) guarantee rapid, reliable and economical instal-

lation. Coordinated system components ensure the quality of

the transmission line. Installations times are calculable.

A lasting solution

On-site installation frequently takes place under unfavoura-

ble conditions. Moisture, dirt and poorly accessible areas are

nothing unusual. This is why we use an IP67 protection class wire

ripple tube for our GigaLine® trunk cables with universal or out-

door cable. Thanks to their particularly strong construction with

an encapsulated cable divider and bolted-on wire ripple tube,

our trunk cables are protected against water spray and non-

crush. They are ideal for harsh construction site environments

and outdoor cabling systems. Indoor cables are fitted with dust

protection without strain relief to prevent soiling of the plugs.

GigaLine® trunk cables ensure that ambient conditions do not

affect the quality of the transmission lines – either during or

after installation. The feeder aid is flexible and has a small cross

section. This enables pre-assembled trunk cables to be easily fed

into tight, twisty manholes and installation channels. A frictional

connection is formed with the divider head. It acts on the strain

relief elements and the sheaths. The fibers thereby remain free

of tension. The divider head design guarantees the stability

of the physical parameters and a long service life.

Time is money

GigaLine® trunk cables stand for reliable and calculable installa-

tion. Installations times are short. All GigaLine® 19" trunk cable

housings have recesses on the back in which the divider head is

mounted to prevent rotation. The fast assembly minimises any

downtime e.g. as a result of an IT system's temporary shutdown.

There is no need for splicing the cables or fitting the plugs on

site, which would sometimes involve adverse conditions. This

also does away with costly outlay on splicing equipment and

specially trained staff. GigaLine® trunk cables can also be used

as a cable pre-assembled at one end.

Fields of application

GigaLine® trunk cables are ideal for backbone cabling in the pri-

mary and secondary segments as well as for collapsed backbone

cabling.

Quality means maximum safety

The plugs are assembled with high quality ceramic ferules

under clean conditions. The plug faces are polished to the high-

est standard, thereby ensuring outstanding plug transitions

in reproducible quality (input and return attenuation). A test

certificate with the attenuation readings of each fiber is sup-

plied with the product. There is also the option of having OTDR

measurements.




Insertion loss typ.

Return loss typ.


G62.5/125 OM1e > 35 dB

G50/125 OM2e > 35 dB

G50/125 OM3 > 35 dB

G50/125 OM4 > 35 dB

E9..10/125 OS2 > 50 dB

E9..10/125 OS2 APC > 65 dB


Bending radius




Fire performance

Flame retardancy

Halogen free

Smoke density

IEC 60332-1 / IEC 60332-3-22, Cat. A

IEC 60754-1

IEC 61034

GigaLine® Trunk Mini-Breakout

Construction

Single elements

Strain relief

Cable sheath

Patch element

Dust protection

Protection class

Up to 12 semi-tight buffered fibers

with diameter 0.9 mm

Colour code acc. to EIA/TIA 598C

Blue (1), orange (2), green (3), brown (4),

grey (5), white (6), red (7), black (8), yellow (9),

violet (10), pink (11), turquoise (12)

Aramid threads


OM1e, OM2e ●■Orange

OS2 ●■Yellow

OM3 ●■Aqua


diameter 0.9 mm, shortest patch element

55 cm, gradation 5 cm

Protected with plastic tube

acc. to IP44


Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–10 °C up to +50 °C

GigaLine® Fiber optic trunk cable, Mini-BreakoutType KL-I-V(ZN)H, pre-assembled at both ends

Advantages

■■ easy assembly■■ best optical

properties

Plug SC E2000 LC


4 LKD 9Vxx x08B 0000 LKD 9Vxx x08L 0000 ✆

6 LKD 9Vxx x08C 0000 LKD 9Vxx x08M 0000 ✆

8 ✆ LKD 9Vxx x08N 0000 ✆

12 LKD 9Vxx x08E 0000 LKD 9Vxx x08O 0000 ✆


4 LKD 9Vxx x095 0000 LKD 9Vxx x09F 0000 ✆

6 LKD 9Vxx x096 0000 LKD 9Vxx x09G 0000 ✆

8 LKD 9Vxx x097 0000 ✆ ✆

12 LKD 9Vxx x098 0000 ✆ ✆


4 ✆ ✆ ✆

6 ✆ ✆ ✆

8 ✆ ✆ ✆

12 ✆ ✆ ✆


4 LKD 9Vxx x10O 0000 LKD 9Vxx x10Y 0000 ✆

6 LKD 9Vxx x10P 0000 LKD 9Vxx x10Z 0000 ✆

8 ✆ ✆ ✆

12 LKD 9Vxx x10R 0000 LKD 9Vxx x111 0000 ✆

xxx = Length in metres, measured from plug side A to plug side B✆■further plug types and fiber numbers on request


Office DataCenter IndustryOffice DataCenter 79 GigaLine®FO patch cords / trunk cables



GigaLine® Trunk Breakout

Construction

Single elements

Strain relief

Cable sheath

Patch element

Dust protection

Protection class

Up to 12 buffered fibers under one sheath,

diameter 2.1 mm

Aramid threads


OM1e, OM2e ●■Orange

OS2 ●■Yellow

OM3 ●■Aqua


Shortest patch element 55 cm,

gradation 5 cm

Protected with plastic tube

acc. to IP44


Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–10 °C up to +50 °C


Insertion loss typ.

Return loss typ.


G62.5/125 OM1e > 35 dB

G50/125 OM2e > 35 dB

G50/125 OM3 > 35 dB

G50/125 OM4 > 35 dB

E9..10/125 OS2 > 50 dB

E9..10/125 OS2 APC > 65 dB


Min. bending radius




Fire performance

Flame retardancy

Halogen free

Smoke density

IEC 60332-1 / IEC 60332-3-22, Cat. A

IEC 60754-1

IEC 61034

GigaLine® Fiber optic trunk cable, breakoutType KL-I-V(ZN)HH, pre-assembled at both ends

Advantages

■■ easy assembly■■ best optical

properties

Plug SC E2000 LC


4 LKD 9Vxx x11D 0000 LKD 9Vxx x11N 0000 ✆

6 ✆ ✆ ✆

8 LKD 9Vxx x11F 0000 LKD 9Vxx x11P 0000 ✆

12 LKD 9Vxx x11G 0000 LKD 9Vxx x11Q 0000 ✆


4 LKD 9Vxx x127 0000 ✆ ✆

6 ✆ ✆ ✆

8 ✆ ✆ ✆

12 LKD 9Vxx x12A 0000 LKD 9Vxx x12K 0000 ✆


4 ✆ ✆ ✆

6 ✆ ✆ ✆

8 ✆ ✆ ✆

12 ✆ ✆ ✆


4 LKD 9Vxx x14U 0000 LKD 9Vxx x156 0000 LKD 9Vxx x15I 0000

6 ✆ ✆ ✆

8 LKD 9Vxx x14W 0000 LKD 9Vxx x158 0000 LKD 9Vxx x15K 0000

12 LKD 9Vxx x14Y 0000 LKD 9Vxx x15A 0000 LKD 9Vxx x15M 0000



Office DataCenter Industry 81 GigaLine®FO patch cords / trunk cablesOffice DataCenter Industry



GigaLine® Trunk U-DQ(ZN)BH IP67

Construction

Single elements

Farbcode

Strain relief

Cable sheath

Divider head

Strain relief

Patch element

Strain relief

Dust protection

Protection class

Up to 48 buffered fibers with strain relief

under one sheath, diameter 1.8 mm

Acc. to IEC 60304

Non-metallic (glass rovings)


Colour: black

Aluminium

600 N

Ø 1.8 mm, assorted colours acc. to

IEC 60304, shortest patch element 55 cm,

gradation 5 cm

100 N

Protective tube IP67

Acc. to IP67


Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–25 °C up to +70 °C


Insertion loss typ.

Return loss typ.


G62.5/125 OM1e > 40 dB

G50/125 OM2e > 40 dB

G50/125 OM3 > 40 dB

G50/125 OM4 > 40 dB

E9..10/125 OS2 > 50 dB

E9..10/125 OS2 APC > 70 dB

Size of the divider head

Diameter divider

head max.

Diameter pull tool

max.

for 2–12 fibers 25 mm





Bending radius static 15 x outer diameter


Fire performance

Flame retardancy

Halogen free

Smoke density

IEC 60332-1 / IEC 60332-3-24, Cat. C

IEC 60754-1

IEC 61034


Longitudinally

watertight

IEC 60794-1-2 F5

GigaLine® Fiber optic trunk cable, universalType KL-U-DQ(ZN)BH, pre-assembled at both ends

Advantages

■■ robust design■■ easy assembly■■ high crush resist-

ance & tensile

strength■■ best optical

properties


Office DataCenter Industry 83 GigaLine®FO patch cords / trunk cables

Plug SC E2000 E2000HRL LC


4 LKD 9Vxx x61N 0000 LKD 9Vxx x61T 0000 LKD 9Vxx x61Z 0000 LKD 9Vxx x60H 0000

6 LKD 9Vxx x61O 0000 LKD 9Vxx x61U 0000 LKD 9Vxx x620 0000 LKD 9Vxx x60I 0000

8 LKD 9Vxx x61P 0000 LKD 9Vxx x61V 0000 LKD 9Vxx x621 0000 LKD 9Vxx x60K 0000

12 LKD 9Vxx x61Q 0000 LKD 9Vxx x61W 0000 LKD 9Vxx x622 0000 LKD 9Vxx x60L 0000

24 LKD 9Vxx x61R 0000 LKD 9Vxx x61X 0000 LKD 9Vxx x623 0000 LKD 9Vxx x60M 0000

48 LKD 9Vxx x61S 0000 LKD 9Vxx x61Y 0000 LKD 9Vxx x624 0000 LKD 9Vxx x60N 0000


4 LKD 9Vxx x61G 0000 ✆ ✆ LKD 9Vxx x60B 0000

6 LKD 9Vxx x61H 0000 ✆ ✆ LKD 9Vxx x60C 0000

8 LKD 9Vxx x61I 0000 ✆ ✆ LKD 9Vxx x60D 0000

12 LKD 9Vxx x61K 0000 ✆ ✆ LKD 9Vxx x60E 0000

24 LKD 9Vxx x61L 0000 ✆ ✆ LKD 9Vxx x60F 0000

48 LKD 9Vxx x61M 0000 ✆ ✆ LKD 9Vxx x60G 0000


4 LKD 9Vxx x61A 0000 ✆ ✆ LKD 9Vxx x615 0000

6 LKD 9Vxx x61B 0000 ✆ ✆ LKD 9Vxx x616 0000

8 LKD 9Vxx x61C 0000 ✆ ✆ LKD 9Vxx x617 0000

12 LKD 9Vxx x61D 0000 ✆ ✆ LKD 9Vxx x618 0000

24 LKD 9Vxx x61E 0000 ✆ ✆ LKD 9Vxx x619 0000

48 LKD 9Vxx x61F 0000 ✆ ✆ LKD 9Vxx x60A 0000


4 LKD 9Vxx x60U 0000 ✆ ✆ LKD 9Vxx x609 0000

6 LKD 9Vxx x60V 0000 ✆ ✆ LKD 9Vxx x610 0000

8 LKD 9Vxx x60W 0000 ✆ ✆ LKD 9Vxx x611 0000

12 LKD 9Vxx x60X 0000 ✆ ✆ LKD 9Vxx x612 0000

24 LKD 9Vxx x60Y 0000 ✆ ✆ LKD 9Vxx x614 0000

48 LKD 9Vxx x60Z 0000 ✆ ✆ LKD 9Vxx x613 0000


4 LKD 9Vxx x60O 0000 ✆ ✆ ✆

6 LKD 9Vxx x60P 0000 ✆ ✆ ✆

8 LKD 9Vxx x60Q 0000 ✆ ✆ ✆

12 LKD 9Vxx x60R 0000 ✆ ✆ ✆

24 LKD 9Vxx x60S 0000 ✆ ✆ ✆

48 LKD 9Vxx x60T 0000 ✆ ✆ ✆





GigaLine® Trunk A-DQ(ZN)B2Y IP67

Construction

Single elements

Farbcode

Strain relief

Cable sheath

Divider head

Strain relief

Patch element

Strain relief

Dust protection

Protection class

Up to 48 buffered fibers with strain relief

under one sheath, diameter 1.8 mm

Acc. to IEC 60304

Non-metallic (glass rovings)

PE, UV-resistant

Colour: black

Aluminium

600 N

Shortest patch element 55 cm,

gradation 5 cm

100 N

Protective tube

Acc. to IP67


Transport/storage

Installation

Operating temp.

–25 °C up to +70 °C

–5 °C up to +50 °C

–25 °C up to +70 °C


Insertion loss typ.

Return loss typ.


G62.5/125 OM1e > 35 dB

G50/125 OM2e > 35 dB

G50/125 OM3 > 35 dB

G50/125 OM4 > 35 dB

E9..10/125 OS2 > 50 dB

E9..10/125 OS2 APC > 65 dB

Size of the divider head

Diameter divider

head max.

Diameter pull tool

max.






Bending radius static 15 x outer diameter


Fire performance


sonstige Eigenschaften

Longitudinally

watertight

IEC 60794-1-2 F5

GigaLine® Fiber optic trunk cable, outdoorType KL-A-DQ(ZN)B2Y, pre-assembled at both ends

Advantages

■■ robust design■■ easy assembly■■ high crush resist-

ance & tensile

strength■■ best optical

properties

Plug SC E2000 E2000HRL LC


4 LKD 9Vxx x005 0000 LKD 9Vxx x00J 0000 LKD 9Vxx x00Q 0000 ✆

6 LKD 9Vxx x006 0000 LKD 9Vxx x00K 0000 LKD 9Vxx x00R 0000 ✆

8 LKD 9Vxx x007 0000 LKD 9Vxx x00L 0000 LKD 9Vxx x00S 0000 ✆

12 LKD 9Vxx x008 0000 LKD 9Vxx x00M 0000 LKD 9Vxx x00T 0000 ✆

16 LKD 9Vxx x009 0000 LKD 9Vxx x00N 0000 LKD 9Vxx x00U 0000 ✆

24 LKD 9Vxx x00A 0000 LKD 9Vxx x00O 0000 LKD 9Vxx x00V 0000 LKD 9V10 0647 0000

48 LKD 9Vxx x00B 0000 LKD 9Vxx x00P 0000 LKD 9Vxx x00W 0000 LKD 9Vxx x01A 0000


4 LKD 9Vxx x01B 0000 LKD 9Vxx x01P 0000 ✆ LKD 9Vxx x023 0000

6 LKD 9Vxx x01C 0000 LKD 9Vxx x01Q 0000 ✆ ✆

8 LKD 9Vxx x01D 0000 ✆ ✆ LKD 9Vxx x025 0000

12 LKD 9Vxx x01E 0000 ✆ ✆ LKD 9Vxx x026 0000

16 ✆ ✆ LKD 9Vxx x027 0000

24 LKD 9Vxx x01G 0000 ✆ ✆ LKD 9Vxx x028 0000

48 LKD 9Vxx x01H 0000 ✆ ✆ LKD 9Vxx x029 0000


4 ✆ ✆ ✆ ✆

6 ✆ ✆ ✆ ✆

8 ✆ ✆ ✆ ✆

12 LKD 9V10 062A 0000 ✆ ✆ LKD 9Vxx x62J 0000

16 ✆ ✆ ✆ ✆

24 ✆ ✆ ✆ LKD 9Vxx x65G 0000


4 LKD 9Vxx x03G 0000 LKD 9Vxx x03U 0000 ✆ ✆

6 LKD 9Vxx x03H 0000 LKD 9Vxx x03V 0000 ✆ ✆

8 LKD 9Vxx x03I 0000 LKD 9Vxx x03W 0000 ✆ ✆

12 LKD 9Vxx x03J 0000 LKD 9Vxx x03X 0000 ✆ ✆

16 ✆ ✆ ✆ ✆

24 LKD 9Vxx x03L 0000 LKD 9Vxx x03Z 0000 ✆ ✆



Office DataCenter IndustryIndustry 85 GigaLine®FO patch cords / trunk cables


86GigaLine® DataCenter links

GigaLine®

DataCenter links


Office DataCenter Industry 87 GigaLine®DataCenter links

GigaLine® DataCenter links page


dc■ DataCenter link• DClink 40/100 OM3 G50/125• DClink 40/100 OM4 G50/125

89

dc■ DataCenter link• DClink OS2 E9.10/125• DClink OM3 G50/125• DClink OM4 G50/125

91

dc■ DataCenter MTP module• DC MTP module OS2 E9..10/125• DC MTP module OM3 G50/125• DC MTP module OM4 G50/125

91

o ■ Office

dc■ DataCenter

i ■ Industry



GigaLine® DataCenter linksQuick & easy solution for ready-to-use links in DataCenters

For transmissions up to 10 Gbit/s, fiber pairs are separated from

the 12x fiber bundle using an MPO to LC duplex fanout (see

Figure) so that 144 channels are available per rack unit.

To retrofit the system for 40 Gbit/s systems (parallel transmission

over 2 x 4 fibers), the fanout simply has to be replaced by sim-

plex MPO patch cords (see Figure) with 12 fibers (24 systems per

rack unit).

Two simplex MPO patch cords, i.e. 2x12 fibers (parallel transmis-

sion over 2 x 10 fibers) are used for 100 Gbit/s (12 systems per

rack unit).

In contrast to conventional cabling systems in which the link

has to be replaced, GigaLine® DClink offers numerous advan-

tages:■■ Migratability to all data rates used is possible by simply

replacing the patch cords (no need to modify the permanent

installation)■■ Rapid and economical installation as GigaLine® DClink is deli-

vered fully assembled■■ High reliability and quality as GigaLine® DClink is tested

before leaving the factory■■ Clear arrangement in spite of high packing density

DataCenters have special requirements since downtimes

there can have catastrophic consequences.

It must therefore be ensured that disruptions are kept to

a minimum, particularly when carrying out renovation work

during operation. LEONI has developed systems for this that

take these requirements into consideration right from the

construction stages of a new DataCenter.

As well as ensuring adherence to the applicable cabling stan-

dards, our systems also offer countless options for quick and

reliable construction and renovation of DataCenters.

DClink 40/100 is a cabling system that is suitable for all trans-

mission protocols. It is delivered as a tested permanent FO link

and consists of a cable with 8x12 OM3/OM4 fibers that is already

equipped with a partial patch panel at both ends. The pre-

assembled link just has to be installed by snapping it into the

socket provided in the patch panel. This allows three GigaLine®

DClink partial patch panels with 8 MPO couplings each in the

patch panel to be fitted at a single level.

The use of low or medium data rates of up to 10 Gbit/s and

higher data rates of up to 40 and 100 Gbit/s can thus be realised

without modifications to the permanently installed GigaLine®

DClink cabling. This allows the fibers to be used both individu-

ally for applications up to 10 Gbit/s and in parallel for 40 and 100

Gbit/s. Migration or connection to the necessary transmission

technology is carried out via application-specific patch cords.

VarioLine® DClink sockets with 3 GigaLine® DClink modules 40/100 Gbit/s with 8 MPO each

GigaLine® patch cord MPO-6LC-Dx (fanout)

GigaLine® patch cord MPO-MPO (12 OM3/OM4)

Configuration Order no.

GigaLine® DClink OM3 G50/125 GigaLine® DClink OM4 G50/125

8 MTP(male) – 8 MTP(male) LKD 9R31 6xxx 0000* LKD 9R31 nxxx 0000*

xxx = Length between the link modules in m. Further configurations on request.1 piece per packing unit.

* Wiring: crossed (KBG00007)

Designation Cable type ColourLaser bandwidth

Strain relief

Cable sheathSheath diameter

MHz x km N mm

GigaLine® DClink 40/100 OM3KL-I-F(ZN)H(ZN)H 8x12 24 G50/125 2,5B1500 0,7F500(IEC 60793-2 A1a.2)

Aqua 2,0001,000

Halogen-free and flame-retardant

14.0GigaLine® DClink 40/100 OM4

KL-I-F(ZN)H(ZN)H 8x12 24 G50/125 2,5B3500 0,7F500(IEC 60793-2 A1a.3)

Heather violet

2,000

GigaLine® DClink 40/100 OM3 G50/125GigaLine® DClink 40/100 OM4 G50/125

Description

Connection-ready link – one DClink module in a high tensile

strength connection with a high-quality universal cable at each

end. The housing can be opened if necessary and the divider

containing the patch elements removed and pulled through

tight openings (≥ diam. 35 mm) with the help of a pull-in tube.


In DataCenters acc. to ISO/IEC 11801 and EN 50173 (2nd edition).

DClink OS3

DClink OM4

For all applications from Classes >

OF-100(40 and 100 GBE),

OF-300 (10 GbE),

OF-500 (GbE/Fiber Channel)

and OF-2000 (Fast Ethernet)


OF-100(40 and 100 GBE),

OF-300 (GigaLine 550), (10 GbE),

OF-500 (GbE/FiberChannel)


DClink-Modul

Housing

Dimensions

Configuration

Insertion loss

Return loss

Steel panel, front Jet black RAL 9005


8 MTP / MPO

0.25 dB (typ.)

OM3 > 20 dB

OM4 > 20 dB


GigaLine® DClink Pull tool

Order no.: LKD 9R00 0008 0000


Office DataCenter IndustryDataCenter 89 GigaLine®DataCenter links

GigaLine® DataCenter linkConnection-ready links up to 100 Gbit/s

Advantages

■■ for all data rates

up to 100 Gbit/s■■ highest degree of

preassembly■■ simplest assembly■■ best optical

properties



Configuration Order no.

GigaLine® DClink OS2 E9..10/125 GigaLine® DClink OM3 G50/125 GigaLine® DClink OM4 G50/125

6 LC Duplex PC – 6 LC Duplex PC* LKD 9R20 8xxx 0000 LKD 9R30 8xxx 0000 LKD 9R10 8xxx 0000

6 LC Duplex PC – 6 SC Duplex PC* LKD 9R20 9xxx 0000 LKD 9R30 9xxx 0000 LKD 9R10 9xxx 0000

6 SC Duplex PC – 6 SC Duplex PC* LKD 9R21 0xxx 0000 LKD 9R31 0xxx 0000 LKD 9R11 0xxx 0000

12 LC Duplex PC – 12 LC Duplex PC* LKD 9R21 1xxx 0000 LKD 9R31 5xxx 0000 LKD 9R11 1xxx 0000

12 E2000-Simplex PC – 12 E2000 Simplex PC* LKD 9R21 2xxx 0000 LKD 9R31 2xxx 0000 LKD 9R11 2xxx 0000

6 LC Duplex PC – 12 E2000 Simplex PC* LKD 9R21 3xxx 0000 LKD 9R31 3xxx 0000 LKD 9R11 3xxx 0000

*Wiring: crossed in pairs (KBG00001)xxx = Length between the link modules in m. Other configurations on request.1 piece per packing unit.

Designation Cable typeLaser bandwidth

Strain relief

Cable sheathSheath diam.

MHz x km N mm

GigaLine® DClink OS2 KL-U-DQ(ZN)BH 1x12 or 24 E9/125 0,36F3,5/0,22H18 (ITU G652.D) –

1,000Halogen-free and flame-retardant

7.0 (12 fibers) 7.5 (24 fibers)

GigaLine® DClink OM3 KL-U-DQ(ZN)BH 1x12 or 24 G50/125 2,5B1500 0,7F500 (IEC 60793-2 A1a.2) 2,000

GigaLine® DClink OM4 KL-U-DQ(ZN)BH 1x12 or 24 G50/125 2,5B3500 0,7F500 (IEC 60793-2 A1a.3) 4,700

GigaLine® DClink OS2 E9.10/125GigaLine® DClink OM3 G50/125GigaLine® DClink OM4 G50/125

Description

Connection-ready link – one DClink module in a high tensile

strength connection with a high-quality universal cable at each

end. The housing can be opened if necessary and the divider

containing the patch elements removed and pulled through

tight openings (≥ diam. 35 mm) with the help of a pull-in tube.


In DataCenters acc. to ISO/IEC 11801 and EN 50173 (2nd edition).

DClink OS2

DClink OM3

DClink OM4

For all applications up to Class OF-10000

For all applications from Classes

OF-300 (10 GbE), OF-500 (GbE/Fiber

Channel) and OF-2000 (Fast Ethernet)


OF-300 (GigaLine 550), (10 GbE),

OF-500 (GbE/ FiberChannel)


DClink-Modul

Housing

Dimensions

Configuration

Insertion loss

Return loss



Fiber optic connector (see table)

0.2 dB (typ.)

OS2 > 50 dB (PC), > 70 dB (APC)

OM3 > 40 dB

OM4 > 40 dB


GigaLine® DClink Pull tool Order no.: LKD 9R00 0008 0000

GigaLine® DataCenter linkConnection-ready links

Advantages

■■ for all data rates

up to 10 Gbit/s■■ highest degree

of preassembly■■ simplest assembly


Office DataCenter IndustryDataCenter 91 GigaLine®DataCenter links

Designation Configuration Order no. Configuration Order no.

1 x GigaLine® MTP module OS2 E9..10/125 6 LC Duplex PC* LKD 9R70 0008 0000 6 LC Duplex PC** LKD 9R7G 0008 0000

2 x GigaLine® MTP module OS2 E9..10/125 12 LC Duplex PC* LKD 9R70 0009 0000 12 LC Duplex PC** LKD 9R7G 0009 0000

1 x GigaLine® MTP module OM4 G50/125 6 LC Duplex PC* LKD 9R70 0010 0000 6 LC Duplex PC** LKD 9R7G 0010 0000




1 piece per packing unit. * Wiring: crossed (KBG00003) ** Wiring: crossed / twisted in pairs (KBG00006)

GigaLine® DC MTP module OS2 E9..10/125GigaLine® DC MTP module OM3 G50/125GigaLine® DC MTP module OM4 G50/125

Description

Connection-ready MTP module for installation in a DClink frame.


In DataCenters and in structured cabling acc. to ISO/IEC 11801

and EN 50173 (2nd edition).

For all applications from Classes >OF-300 (GigaLine 550)

(10 GbE), OF-500 (GbE/FiberChannel) und OF-2000 (Fast

Ethernet).

DC MTP module

Housing

Dimensions

Front side

Configuration

Insertion loss

Return loss

Rear

Configuration

Insertion loss

Return loss

Fiber types



max. 12 LC Duplex, 6 SC Duplex,

12 SC-Simplex, 12 E-2000 Simplex

typ. 0.2 dB

> 50 dB (SM, PC), > 65 dB (SM, APC),

> 35 dB (MM)

1x or 2x MTP® (male)

typ. 0.3 dB

> 50 dB (SM), > 20 dB (MM)

OS2 / OM4 / OM3

GigaLine® DataCenter MTP modulefor installation in DClink frame


92GigaLine®



The acceptance measurement for GigaLine® cabling systems

is carried out in accordance with the requirements of ISO/IEC

11801 or EN 50173-1:2007. DIN ISO/IEC 14763-3 is also relevant

to the acceptance measurement.

For an OTDR measurement, a launch fiber and receive fiber

must be used. These must be longer than the dead zone of the

OTDR being used. For multimode links, the fiber should be at

least 100 m in length; for singlemode links, the fiber should be

at least 500 m in length.

A bidirectional measurement is necessary to avoid or eliminate

measurement errors due to different backscatter coefficients

if the overall link consists of several spliced or patched sublinks.

The set measuring range must be twice as big as the transmis-

sion link to be measured. The pulse width of the OTDR should

be chosen as short as possible. This keeps the dead zones at

reflected events to a minimum.

Index-adjusting materials must not be used.

Maximum attenuation of the transmission links in dB

Class Multimode Singlemode

850 nm 1,300 nm 1,310 nm 1,550 nm

OF 300 2.55 1.95 1.80 1.80

OF 500 3.25 2.25 2.00 2.00

OF 2000 8.50 4.50 3.50 3.50

OF 5000 4.00 4.00

OF 10000 6.00 6.00

Both attenuation meters and OTDR are vital for professional fiber

optic installation. The test engineer must have a valid calibration

certificate for the testing device.

Attenuation meters OTDR Fiber identifiers

Acceptance measurementfor GigaLine® cabling systems


Field of application94

OfficeField of application


Office DataCenter IndustryOffice Field of application 95

CD Campus distributor

EI Building distributor

FD Floor distributor

CP Consolidation point

TO Telecommunications outlet

TE Terminal equipment

Structure of a generic communication cable system ISO/IEC 11801 and DIN EN 50173-1/2

FDEI CP TO TECD

Subsystem of the primary cabling system

Subsystem of the secon-dary cabling

system

Subsystem of the tertiary cabling system

Generic communication cable system

Equipment connection

cabling system

These days, the future of a company depends to a large

extent on reliable and timely data processing.

The rapid development of data bit rates and the wide range of

applications require a very flexible, high-performance network

infrastructure that will be able to meet the demands for the

next ten years.

High-quality generic IT networks form the backbone of the busi-

ness in research & development, banks, insurance companies,

universities, hospitals, hotels, airports and many other sectors,

providing smooth operation and financial success.

The smart use of fiber optics and copper data technologies for

the backbone and horizontal wiring to the user enables cost-

effective networking of standard resources such as PCs and

printers, with an extension to IP telephony and multimedia

applications. Other applications, such as Power-over-Ethernet

(PoE), support the powering of devices such as web cameras,

wireless LAN access points, IP phones and laptops via the copper

data cabling.

These structured, generic communication cable systems meet

both the international and European standards set by ISO/IEC

11801 and DIN EN 50173-1/2 respectively.

Generic cabling in office buildingsThe complete cable system, from distribution equipment to workstation

ISO/IEC 11801 and EN 50173-2

Information technology

Genericcommunication cable systems

Office buildings

ISO/IEC 11801 andEN 50173-1



General requirements




Industry




Apartments




DataCenters



DataCenterField of application

96


Office DataCenter Industry Field of applicationDataCenter 97

Generic cabling in DataCenters

The structure

The maximum extension is 2,000 metres. In DataCenters the

main distribution cabling is frequently designed using fiber

optic technology, while in smaller networks the external net-

work interface (ENI) is connected directly to the zone distributor

(ZD). The standards describe various models for flexible and

fixed connections in and between the subsystems.

The cabling of the main and zone distribution must, according

to ISO/IEC 24764, meet the requirements of Class EA for copper

technology and transmission classes OF-300, OF-500 and

OF-2000 for fiber optic technology as a minimum.

The standards

Generic communication cable systems are defined in the stan-

dards EN 50173-1 and ISO/IEC 11801.

In addition, specific requirements for DataCenters are defined

in EN 50173-5 and ISO/IEC 24764.

The cabling used in DataCenters consists of three subsystems:■■ Network access cabling ■■ Main distribution cabling ■■ Zone distribution cabling

ENI External network interface

MD Main distributor

ZD Zone distributor

LDP Local distribution point

(optional)

EO External network interface

EQP Application-specific

transmission equipment

Structure of a generic communication cable system

ZDMD LDP EO EQPENI

Distributor acc. to

EN 50173-1

ISO/IEC 11801 and EN 50173-2


Generic communication cable systems

Office buildings




General requirements




Industry




Apartments




DataCenters

Networkaccess

Main distribution

cablingZone distribution cabling

Generic communication cable system

Equipmentcabling



DataCenter

The DataCenter, the heart of the business, controls the pro-

duction and administrative processes. A failure here can have

catastrophic consequences, and the availability of a DataCenter

must be therefore guaranteed more or less around the clock.

The cabling system makes a key contribution to its operation

reliability.

Performance requirements for modern DataCenters■■ Maximum availability, zero downtime ➔ maximum reliability■■ Short installation times■■ Maximum performance■■ Minimal space requirement – high packing density■■ Cost efficiency■■ Environmental compatibility – Green IT

The diverse requirements for DataCenters cannot be considered

separately. For example, optimising the environmental perfor-

mance will lead to a reduction in costs. Investing in industrially

pre-assembled components is usually associated with higher

costs, but enables installation and testing times to be reduced,

thus reducing the cost associated with downtime.

➔ High quality

Quality testing at the factory, performance and safety are

already built into LEONI products.

➔ Minimise downtime

Installation and commissioning take a very short time, with

no need for special tools or assembly skills. This keeps down-

time to a minimum.

➔ Cost reduction

The use of GigaLine® DClink results

in cost savings of up to 55 % in

comparison with traditional modular

systems using MPO connection

technology.

Requirements and solutionsFast – high-quality – cost-optimised

Costs per link*

100 %

45 %

Mod

ular

solu

tion

s wit

h M

PO

DCl

ink

* Example: Link length: 30 m, fibers: 24 x OS2, plugs: LC Duplex


Office DataCenter Industry Field of applicationDataCenter 99

Ecologically aware cabling

Environmentally sound materials and production methods,

the possibility of recycling or ecologically viable recovery and,

last but not least, the reusability of products if required guaran-

tee maximum environmental compatibility. Cables and compo-

nents are free of hazardous substances.

Optimising attenuation

A GigaLine® DClink offers up to 70 %

less attenuation than conventional

modular systems using MPO

connectivity.

GigaLine ® DClink

VarioLine ® CP

GigaLine ® DCflex

MegaLine ® DClink

LEONI can offer a range of high-

quality products that go well beyond the

current standards and requirements for data centers.

■■ An EC7 plug and the corresponding cable delivers

performance far exceeding Class FA ■■ Fiber optic cable systems constructed using LEONI cables

offer enormous reserves for attenuation and bandwidth

The Installation

Plug and play solutions for copper and fiber optic applica-

tions consist of pre-assembled links and the VarioLine® DClink

frame (19", 1 RU) for the DClink modules. The DClink modules

are simply inserted and clicked into place from the rear after

the links are installed.

DClink system solutions

DClink can be used to create fiber optic, copper or mixed con-

figurations in various categories. This renders on-site assembly

completely unnecessary. The modules can be easily removed

again using a simple release tool.

Attenuation per link*

IL=1.4 dB100 %

IL=0.4 dB> 30 %

Mod

ular

solu

tion

s wit

h M

PO

DCl

ink

* Example: Link length: 30 m, fibers: 24 x OS2, plugs: LC Duplex

The advantagesExceed all requirements with LEONI



Single cables – complex installation and cannot be reused

It is not just installing new cables that is difficult and time-

consuming, but also removing the old cables. The only options

are either to cut them out or simply leave them where they are.

This means that there is no practical way of reusing them and

they are not recycled.

The disorganised way in which the cables are installed obstructs

the flow of cooling air. Only a higher volumetric flow rate and/or

a lower air temperature can help here. Both mean higher costs

and increased environmental impact.

Comparison of cabling systemsSingle cable vs. multi cable


101

Multi cables – quick and clean installation and can be reused at any time

Pre-assembled multi cable solutions ensure a clean and clear

cabling layout in the raised floor. As well as making installation

easier and therefore quicker, this also helps to improve cooling

air circulation.

Cables and components are free of hazardous substances.

The low volume of the installed multi cables guarantees an

unobstructed flow of cooling air and therefore uses less energy.

Index

Welcome to the mega store for cable and system solutions

2

The LEONI Group 4

High-quality industrial cables and conductors

5

Great brands, great service 6

Green Technology 8

Technologies – investment in sustainable security

10

GigaLine® FO data cables 12

The fiber 14

For LAN, WAN and SAN 17

Fiber qualities 18

Colour codes 19

Type codes 20

Jacketing material for optical cables 21

Rodent protection for fiber optic cables 22

Pictograms 23

Handling and safety notices 24

GigaLine® Indoor cable, duplex fig 8 25

GigaLine® Indoor cable, duplex fig 0 26

GigaLine® Indoor cable, Mini-Breakout 27

GigaLine® Breakout cable 28

GigaLine® Universal cable, Mini-Breakout 800 N

29


30

GigaLine® Universal cable, stranded 4000 N

31


32

LEONI „fire secured“ FO data cables 33

GigaLine® „fire secured“ universal cable, central with CI, 90 min system integrity

34

GigaLine® „fire secured“ universal cable, central with CI, 120 min system integrity

35

GigaLine® Outdoor cable, central 1750 N 36


37

GigaLine® Outdoor cable, central 1750 N 38


39

GigaLine® Outdoor cable, stranded with sheath, 4000 N

40

GigaLine® FO connectivity 42

FO cabling systems 44

GigaLine® Trunk and splice boxes 47

Fiber optic trunk box 48

Fiber optic splice box, telescopic 50

Fiber optic splice box, fixed 52

GigaLine® Compact – fiber optic distribution system

55

Compact fiber optic rack 56

Compact fiber optic module 57

Compact fiber optic module, for splicing solutions

58

GigaLine® Office and floor distributors 61

Fiber optic office and floor distributors 62

GigaLine® Fiber-To-The-Desk (FTTD) wall outlets

65

FTTD wall outlets for surface / flush mounting

66

FTTD wall outlets Cable reservoir / splice tray

67

FTTD outlet for cable ducts 68

FTTD mounting bracket for cable ducts 69

GigaLine® FO patch cords / trunk cables

70

Fiber optic patch cord, breakout 72

FO patch cords LC/PC-Uniboot 74

FO patch cords MTPMTP / MPO patch cord

75

GigaLine® Trunk – pre-assembled trunk cables

77

Fiber optic trunk cable, Mini-Breakout 78

Fiber optic trunk cable, breakout 80

Fiber optic trunk cable, universal 82

Fiber optic trunk cable, outdoor 84


DataCenter links 88

DataCenter link up to 100 Gbit/s 89

DataCenter link, connection-ready 90

DataCenter link MTP module 91

GigaLine® Acceptance measurement 93

Office – Field of application 94

Generic cabling in office buildings 95

DataCenter – Field of application 96

Generic cabling in DataCenters 97

Requirements and solutions 98

The advantages 99

Comparison of cabling systems 100


102GigaLine®

LEONI news

Additional catalogues for MegaLine® copper systems

and VarioLine® connection systems available online at

www.leoni-infrastructure-datacom.com.

Our regularly updated information services such as the LEONI

newsletter keep you abreast of recent developments at LEONI

and on the market.

Visit our homepage:


Here you will find the latest information ■■ Product and company news■■ Specialist articles■■ Trade fairs, seminars and roadshows■■ Announcement texts■■ Standardisations/certification programmes



03. 20

14 / en

_500

0

LEONI Kerpen GmbH

Zweifaller Strasse 275–287

52224 Stolberg

Germany

Phone +49 (0) 2402 17 1

Fax +49 (0) 2402 75154

E-Mail [email protected]

LEONI Studer AG

Herrenmattstrasse 20

4658 Däniken

Switzerland

Phone +41 (0)62 288 82 82

Fax +41 (0)62 288 83 83

E-Mail [email protected]

Find out more:

Business Unit Infrastructure & Datacomwww.leoni-infrastructure-datacom.com

GigaLine® Fiber optic cabling systems for DataCenter · Office ...

Documents

Transcript of GigaLine® Fiber optic cabling systems for DataCenter · Office ...