GHS VSD⁺ solutions for centralized systems - AtlasCopco · 2019. 10. 15. · use two common...
Transcript of GHS VSD⁺ solutions for centralized systems - AtlasCopco · 2019. 10. 15. · use two common...
-
GHS VSD+ SOLUTIONS FOR CENTRALIZED VACUUM Some key components: the engine, brains and remote communication options of your central system described in detail
-
THE ENGINE OF YOUR CENTRAL SYSTEMThe engine of any central vacuum system is the vacuum pump. This brochure features
Atlas Copco’s flagship range, the GHS VSD+ Series. This range of new-generation,
intelligent, oil-sealed rotary screw vacuum pumps features Variable Speed Drive (VSD)
technology. Based on the well-known and durable plug-and-play design principles
of Atlas Copco compressors, these vacuum pumps offer:
• Superior performance against benchmarked oil-sealed, claw pump, liquid ring and dry vane
vacuum pump technologies.
• Increased efficiency – State-of-the-art screw technology, VSD and innovative motor
design combine to produce a leap forward in efficiency.
• Quiet operation – Noise levels are around half that of comparable technologies.
• Sustainable productivity thanks to built-in efficiency.
• Reduced environmental impact due to ultra-high oil retention at all operating pressures.
Energy consumption
Ideal for central systems with variable demand coming from your process
The first figure shows how a fixed
speed machine responds to a typical
demand profile.
Variable demand from your process
often leads to frequent stop-starts.
These can in turn lead to mechanical
and electrical motor problems
such as overheating, fan breakage,
oil degradation and vane
delamination. Traditionally, the way
to overcome these problems is to
use a wide pressure band to limit
the number of stop-starts.
Unfortunately this is not a cost-
effective solution.
A much better solution is to use
a Variable Speed Drive (VSD).
The second figure shows how
a vacuum pump with VSD responds
to the same demand profile.
The pump only delivers what
is required.
Energy consumptionVacuum demandTime
GHS VSD+ energy consumptionTime
Energy consumption
Vacuum demand
-
GHS VSD + STAND-ALONE BENEFITS
High energy efficiency• Variable Speed Drive (VSD) automatically delivers the desired flow, saving you money.
• Huge efficiency gains thanks to state-of-the-art screw technology and the innovative
IE3 Premium Efficiency Motor.
Optimal reliability• Screw element life is significantly longer than vane pumps.
• Canopy with hot-cool zones isolates heat producing and high temperature
components from electronic components.
• Extremely long mean time between maintenance.
Sustainability and environmental friendliness• Market-leading oil retention for optimal exhausted air quality: innovative and patented
design retains oil at
-
W 400MM
ESv CONTROL SOLUTIONS: THE LATEST IN CONTROL TECHNOLOGY FOR VACUUMA properly managed centralized vacuum system saves energy, reduces maintenance, decrease downtime
and improves product quality. Atlas Copco’s ESv central controllers are the most efficient way to monitor
and control multiple vacuum pumps simultaneously.
• Integrated controller for up to 4 or 6 VSD machines.
• External controller for up to or more than 6 machines (fixed speed/VSD mixture).
The most suitable product mix at all timesFixed speed machines used as base load vacuum providers with VSD react quickly
to demand. This maximizes your energy savings and reduces costs.
Fixed speed (these base load machines could also be your old vacuum pumps)
Vacuum demandVSD
Demand
Time
Reduced maintenance costsComprehensive and flexible machine sequence control lets
installed machines work in groups, allowing running hours
to be equalized. ESv ensures that system running hours are
equal across all machines in the same group. This reduces
service costs because all machines can be serviced at the
same time.
H 4
00M
M
The best fit for varying demandsESv makes sure that your most efficient machines are prioritized to reduce downtime and match your requirements.
1 2Machine priority sequences• Normal: newer machines are prioritized over older, less effective models.• Temporary: older machines can be temporarily
prioritized to avoid long periods of non-usage,
reducing the risk of machine faults.
Workload priority settingsESv can prioritize machines in an installation
to find the most economically efficient way to suit
different workload demands in different periods:
day time or night time.
-
1 2 32
ESv Max: Maximum system pressure Min: Minimum system pressureWithout ESv
MaxMax
Min
Min
“Full vacuum”
Atmospheric pressure
Stable process, lower energy consumptionESv central controllers keep your network running within a narrow, predefined pressure band. This increases the stability
of the process and optimizes overall energy consumption.
Local monitoring and control via SCADA, DCS and ICS.SCADA (Supervisory Control and Data Acquisition), DCS (Distributed Control System)
or ICS (Industrial Control Systems) are systems operating with coded signals over
communication channels so as to provide control of remote equipment. They typically
use two common communication protocols: Modbus and Profibus.
Atlas Copco has created a Mk5 Gateway which translates Modbus and Profibus into
CAN protocols and vice versa. This provides seamless integration of GHS VSD+ and/or
fixed speed machines (including other brands) and ESv systems with local control
and monitoring.
• Remote stop/start
• Control of vacuum set point or PI control modification
• External pressure control and speed control
• Purge functions
• Requested machine status
• Service indication
Of course there are many other important components within a central vacuum system and often these are bespoke. To sum it up,
if you obtain the right brains and engine for your system, your financial justification will be so much easier to make.
Atlas Copco also supplies turnkey central systems including:
• Pipeworks and fittings.
• Gauges, valves and leak detectors.
• Service and spare parts on all brands of vacuum pumps.
• Rental equipment.
• SMARTLINK connectivity.
A lifecycle cost calculator is also available. For more information, please contact your Atlas Copco representative.
Thanks to ESv, you can control and monitor your complete vacuum network over the LAN. Features include warning indications,
vacuum pump shutdown warning and maintenance scheduling.
-
GHS VSD+
High energy efficiency • Variable Speed Drive (VSD)
automatically delivers the desired flow with a minimum power to match the required vacuum level.
• and innovative IE3 - Premium Efficiency Motor.
• Set-point control maintains process vacuum level to optimize efficiency and performance.
Optimal reliability• Screw element life is significantly longer than vane pumps.• Canopy with hot-cool zones to isolate heat producing and high
temperature components from electronic components.• Extremely low Mean Time Before Failure rate.
Sustainability and environmental friendliness• Market-leading oil retention for optimal exhausted air quality: innovative and
patented design retains oil at
-
ATLAS COPCO CENTRAL VACUUM SYSTEMS IN PRACTICEWhen applied to a centralized vacuum system, the GHS VSD+ will save you money.
Below we describe an example to demonstrate the cost savings possible.
For more case studies, visit http://www.atlascopco.com/vacuumus/videogallery/ghsvsd
Essentra saves over €8,000 per year with the GHS VSD+ and centralized vacuum systemEssentra Extrusion is a leading custom profile extruder located in the
Netherlands. They do not make standard products, but offer their clients
a complete design and production process. Extrusion is a process used to
create objects with a fixed cross-sectional profile. A material is pushed
or drawn through a die to create the profiles. The extrusion of plastics
relies on vacuum, mainly for the evacuation of gasses from the process.
ChallengeEssentra were looking to update their vacuum pumps; each of their production
lines had around 40 small oil-sealed or dry vane pumps, which led to
considerable maintenance work. The vacuum solution had to be stable and
reliable, as well as quiet, as the Essentra facility is located in a residential area.
In addition they were looking for an environmentally friendly solution.
SolutionEssentra decided to purchase a centralized system featuring the Atlas Copco
GHS 900 VSD+ vacuum pump. The centralized system serves many different
production lines and products. The pump delivers the same performance as
multiple competitive pumps used to, but needs much less space.
OutcomeThe GHS VSD+ vacuum pump is fitted with a 15 kW VSD motor; it replaces many older
pumps with small electric motors and brings energy savings of approximately 75%.
This equates to over €8,000 per year. This is not the only environmental benefit from
the vacuum solution; Essentra also has an Atlas Copco energy recovery system which
uses the heat generated from the Atlas Copco machines to heat water. That hot water is
pumped across the street to heat a municipal swimming pool.
The GHS VSD+ vacuum pump has proven to be reliable with no risk of overheating, as well as being quiet.
Essentra can even run their production processes seven days and nights a week in the residential area,
with no complaints from the neighbors.
-
www.atlascopco.com
COMMITTED TO SUSTAINABLE PRODUCTIVITYWe stand by our responsibilities towards our customers, towards the environment and the
people around us. We make performance stand the test of time. This is what we call –
Sustainable Productivity.
6996
005
2 00
© 2
015,
Atl
as C
op
co, B
elg
ium
. All
rig
hts
res
erve
d. D
esig
ns
and
sp
ecifi
cati
on
s ar
e su
bje
ct t
o c
han
ge
wit
ho
ut
no
tice
or
ob
ligat
ion
. Rea
d a
ll sa
fety
inst
ruct
ion
s in
th
e m
anu
al b
efo
re u
sag
e.