GH Raisoni College Of Engineering Nagpur
-
Upload
vuongnguyet -
Category
Documents
-
view
235 -
download
0
Transcript of GH Raisoni College Of Engineering Nagpur
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Dr. P. V. Walke Dr. D. J. Tidke
Head of Department Faculty Advisor
Members
Prof.A.S.Raut Prof. V.M.Wankar Prof. R.A.Jibhakate In-charge Dept. News Letter Member Dept. News Letter
Editor (Students)
Mr.Shubham Thosar Mr.Anurag Dhariya Mr.Pawan Patel
Volume: 09 September-2014
Vision and Mission of the Mechanical Engineering Department
Our Vision
To be recognized internationally for quality education and research in Mechanical Engineering
with excellence in fields of design, manufacturing and thermal sciences.
Our Mission
To prepare professionally competent and broadly educated mechanical engineers by developing
analytical and research abilities, encouraging culture of continuous learning and by adopting new
technologies to solve complex problems.
Programme Educational Objectives of Department (PEOs)
The educational objectives of the Mechanical Engineering programme are designed to produce
competent engineers who are ready to contribute effectively to the advancement of Mechanical
Engineering causes and to accommodate the needs of the profession. The Mechanical
Engineering Department is dedicated to graduating mechanical engineers who:
1. Shall practice Mechanical Engineering in the general disciplines of design, thermal and
manufacturing engineering in industry and establishments in government and private
sectors.
2. Shall apply fundamental technical knowledge and skills to find workable solutions to
technological challenges and problems in various areas of Mechanical Engineering.
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
3. Shall pursue advanced education, research and development, and other creative efforts in
science and technology.
4. Shall conduct themselves in a responsible, professional and ethical manner for the benefit
of the industry and society.
Programme Outcomes (POs)
1. Acquire knowledge in the discipline of Mechanical Engineering, apply fundamentals of
mathematics, engineering and sciences and apply technologies to solve real problems in
inter and cross disciplinary areas.
2. Search out relevant technical information, use analytical tools to formulate problems
and identify workable solutions.
3. Design mechanical systems, components, or processes to meet their performance needs
from considerations of public health and safety as well as cultural, societal, and
environmental issues.
4. Engage in R & D pursuits, set up and conduct experiments, analyze and interpret the
data using tools, techniques and instrumentation in mechanical engineering and
interdisciplinary area.
5. Identify, formulate and solve mechanical engineering using modern design and
manufacturing approaches and the computational and software tools.
6. Understand the responsibilities associated with the use of engineering and technology
practices on societal issues of concern in respects of health, safety, legal and culture.
7. Understand contemporary issues in sustainable development and in providing
technology solutions considering impact of economic, social, political, environmental
and global issues.
8. Understand ethical and professional issues and responsibilities in engineering practice,
the creative enterprise, loyalty and commitment.
9. Communicate effectively in written, oral and graphical forms, provide instructions and
present the results in a professional manner.
10. Possess knowledge of management principles, materials, processes and systems-
working to function effectively as a member of team in products manufacturing and
projects execution in multidisciplinary environments.
11. Develop ability to engage themselves in lifelong learning, adapt new developments and
participate in continuing education opportunities to remain active in the profession and
foster personal and organizational growth.
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Eleven students from mechanical
engineering department are
selected in TCS
The glorious achievement of
mechanical engineering students, that eleven
students from department has been selected
in the placement drive of Tata Consultancy
Services “TCS” held on 12, 13 & 14
September 2014 in GHRCE, Nagpur. The
credit for this achievement goes to Dr. P R
Bajaj, Director, Dr. P V Walke, Head
Mechanical Engineering Department, Prof.
V. S. Khangar, T & P Co-ordinator.
Installation programme of Solar
Energy Society of India (SESI)
Department of Mechanical
Engineering organizes a installation
programme of office bearers of Solar Energy
Society of India (SESI) on 20-09-2014
(Saturday). Mr. Ashish Bhagat was elected
as a President, Mr. Prasad Wakhare as a
Vice president, Mr. Sachin Tonge as a
secretary, Mr. Aditya Khune as joint
secretary and Mr. Bablu kumar as a
treasurer.
Guest for the programme was Dr. D. J.
Tidke and Dr. V. M. Kriplani, Professor in
Mechanical Engineering Department. Dr. P.
V. Walke, Head Mechanical Engineering
Department, guided the students about the
importance of SESI and activities to be
conducted in the department under the
banner of SESI. All students’ members of
SESI and faculty members of Mechanical
Engineering Department were present in the
programme. Mr. Abhishek Raj anchors the
programme and proposed a vote of thanks.
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Installation programme of
American Society of
Mechanical Engineers (ASME)
Department of Mechanical
Engineering organizes an installation
programme of office bearers of Society of
American Society of Mechanical
Engineers (ASME) on 20-09-2014
(Saturday). Mr. Karandeep singh Gill was
elected as a section chair, Mr. Arjun
Jaiswal as a Vice Chair, Mr. Abhishek Raj
as a secretary, Ms. Dhanali Shivarkar as a
treasurer, Mr. B. Abhilash as vice
chairman programme, Mr. Anuj Umare
as a publicity coordinator, Mr. Kartik
Sonkusare as a vice chairman
membership, Mr. Himanshu Rewatkar as
newsletter and trip coordinator.
Guest for the programme was Dr. D. J.
Tidke and Dr. V. M. Kriplani, Professor in
Mechanical Engineering Department. HoD
Dr. P. V. Walke guided the students about
the importance of ASME and activities to be
conducted in the department under the
banner of ASME. All students’ members of
ASME and faculty members of Mechanical
Engineering Department were present in the
programme. Mr. Abhishek Raj anchors the
programme and proposed a vote of thanks.
Installation programme of
Society of Automotive
Engineers India (SAE)
Department of Mechanical
Engineering organizes a installation
programme of office bearers of Society of
Automotive Engineers India (SAE) on 20 -
09 -2014 (Saturday). Mr. Sahil Shaikh was
elected as a Chairperson, Mr. Tushar
Deshmukh as a Vice Chairperson, Mr.
Sanket Bante as a secretary, Mr. Vivek
Rafalia as a treasurer, Mr. Sumit Barai as
reception chair, Mr. Rupesh Rewatkar as a
publicity chair, Mr.Prakash Ghosh as a
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
programme chair and Mr. Ashay Joshi as a
membership chair.
Guest for the programme was Dr. D. J.
Tidke and Dr. V. M. Kriplani, Professor in
Mechanical Engineering Department. HoD
Dr. P. V. Walke guided the students about
the importance of SAE and activities to be
conducted in the department under the
banner of SAE. All students’ members of
SAE and faculty members of Mechanical
Engineering Department was present in the
programme. Mr. Abhishek Raj anchors the
programme and proposed a vote of thanks.
Guest lecture on „Role of Quality
tools‟ for 1st & 3
rd Semester
M.Tech. CAD/CAM Student
A guest lecture was organized by the
department of Mechanical Engineering,
G. H. Raisoni College of Engineering on
17/09/2014 at W33 at 10:30AM for the
students of 1st and 3
rd semester M.Tech
CAD/CAM.
Mr. Ashish Kumar Chakraborty is a
Mechanical Engineer completed his
education in environment management
system (EI&EA) at IIT-Kanpur & certified
trainer on TQM from JURAN Institute
USA, was invited for delivering the lecture.
He spoke on gemba, kaizen, just in time &
Toyota production system. He has taken
specialize training at USA, Japan, France,
UK, Austria and worked with SAIL, Mittal’s
Ispat Group in India, Philippines.
Now a day implementation of quality
control is very important in industry. He
guided the students about quality
management, quality circle. He discussed
the role of quality in day to day life.
The credit for organizing the
guest lecture goes to Dr. P R Bajaj, Director,
Dr. P V Walke, Head Mechanical
Engineering Department, Dr. D J Tidke,
Prof. P M Wanjari and Prof. L P Raut.
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Guest Lecture on “Uncertainty
Analysis of Thermal Equipment”
The department of Mechanical
Engineering of G. H. Raisoni College of
Engineering, Nagpur has organized a
“Uncertainty analysis of Thermal
Equipment” on 19/09/2014.Guest Lecture
was mainly aimed at upgrading the
knowledge on uncertainty measurement in
thermal equipment. Students from M. Tech.
1st and 3
rd semester (Heat Power
Engineering) were present. This topic was
related with Thermal system design course
and also helpful for carrying their research
work.
The guest lecture was delivered by.
Prof. N. K. Manadavgade Assistant
Professor, Priyadarshani college of
Engineering Nagpur.
He explained various types of
uncertainty sources and its impertinence in
thermal measurement. Also demonstrate
case on uncertainty calculation for thermal
equipment. The guest lecture was co-
ordinate by Prof. V. W. Khond, Assistant
Professor in Mechanical Engineering
Department. The credit for the success of
guest lecture goes to Dr. P. R. Bajaj,
Director, Dr. P. V. Walke, Head Mechanical
Engineering Department, Prof. V. W.
Khond, Coordinator, M. Tech. (HPE), Dr.
V. M. Kriplani and students participants
were prominently present for the guest
lecture.
Guest Lecture on “Emission
measurement Technique”
The department of Mechanical
Engineering of G. H. Raisoni College of
Engineering, Nagpur has organized an
“Emission measurement Technique” on
27/08/2014.
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Guest Lecture was mainly aimed at
upgrading the knowledge on present
emission norms and development in
emission measuring equipment. Students
from M.Tech 1st and 3
rd semester (Heat
Power Engineering) were present. This topic
is related with Thermal Engg-1 and Design
of IC engine components and systems
course and also helpful for those who are
carrying their research work in internal
combustion engine. The guest lecture was
delivered by Mr. Pratik Janai, Sr. Engineer,
AVL Ltd Pune. He explained various types
of emissions and its measurement. Also give
information about present emission norms
and regulation.
The guest lecture was co-ordinate by
Prof. V. W. Khond, Assistant Professor in
Mechanical Engineering Department. The
credit for the success of guest lecture goes to
Dr. P. R.Bajaj, Director, Dr. P. V. Walke
Head Mechanical Engineering Department,
Dr. V. M. Kriplani Coordinator, M.Tech
(HPE), Prof. V. W. Khond, and student’s
participants were prominently present for
the guest lecture. This guest lecture
organized under solar energy society of
India (SESI) chapter.
Industrial Visit to Spacewood
Furnishers Pvt. Ltd., Nagpur by
M.Tech. 1st & 3
rd Semester CAD /
CAM students
Department of Mechanical
Engineering has organized the Industrial
visit to Spacewood Furnishers Pvt. Ltd.
Nagpur, on 18th September 2014 for the
students of 1st and 3
rd semester M. Tech.
CAD/CAM. After completing the industrial
visit, students have upgraded their
knowledge at a very great level. It was a
good learning experience. In each & every
department, they got some or the other new
ideas and new thinking about the state-of-art
furniture industry.
Students have visited the
entire process department. They are using
new technologies and other basic
requirements needed for production is
fulfilled very effectively time to time. They
are dedicated to quality &space utilization
aspect. It is desirable to review various
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
aspects & sum up the industrial visit. During
industrial visit, we feel very much satisfied
by acquiring information of various stages
of production& knowing many new facts.
Students collected all the information related
to process methodologies. The industrial
visit helped to translate theory into practical
and know about the furniture industry. It can
be conclude that while going through the
entire industrial visit, the cooperation is
found to be very well organized developed
& most ideal industry in every walk of its
production, quality & management aspects.
The credit for organizing the
industrial visit goes to Director Dr. P R
Bajaj, Dr. P V Walke, Head Mechanical
Engineering Department, Dr. D J Tidke,
Coordinator, M.Tech (CAD / CAM), Prof. V
S. Khangar and Prof. Laukik Raut.
Industrial Visit to Star Circlips and
Engineering Ltd., Nagpur by 3rd
Semester B. E. Students
The Department of Mechanical
Engineering of G. H. Raisoni College of
Engineering Nagpur has organized Industrial
Visit at Star Circlips and Engineering Ltd.,
Nagpur for B.E. Mechanical Engineering
third semester students on 21/09/2014.
Mr.Anand Bajpayee Operation
Manager helped us for organizing this
industrial visit & has given brief information
about the company.
Mr. Nitesh Thawkar (Deputy
Manager Quality Assurance) describes the
processes which have been carried out to
manufacture circlips. He also gave the
information about raw material inventory,
size and specification of raw material. They
are the vendor of few factories in Hingna
MIDC territory.
The students of 3rd
semester section
B along with Prof. A. S. Deshmukh visited
the company at 10.00 AM. Mr. Nitesh
Thawkar has introduced the company at the
start and given the brief information about
the various operations carried out at
company. Then the students entered into
shop floor with Mr. Nitesh Thawkar.
After visiting shop-floor the students
discussed the various topics for their project
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
with Mr. Nitesh Thawkar and the faculty
members. Mr. Nitesh Thawkar has
suggested the various areas like
Manufacturing, Material handling and
Quality control to students in which they can
do the project. The credit for the success of
visit goes to Dr. P. V. Walke Head
Mechanical Engineering Department, Prof.
V. S. Khangar (Co-coordinator IIP cell),
Prof. A. D. Pitale, Prof. A. S. Deshmukh and
student participants.
Industrial Visit to Mahananda
Dairy utility Ltd. Nagpur by M.
Tech. 1st & 3
rd Semester (HPE)
Students
The department of Mechanical
Engineering of G. H. Raisoni College of
Engineering Nagpur has organized Industrial
visit to Mahananda dairy Ltd Nagpur for the
students of M-Tech (HPE) 1st & 3
rd semester
on 24 September, 2014 appreciated the
efforts taken by CSR group members.
Mr. Mukunde, Maintenance
Manager of Mahananda Dairy Ltd Nagpur
given brief information about the overall
functioning of various departments
including boiler Section, cold storage,
Packaging section, Compressor Section,
Chilling Section.
Total 35 students from M-Tech
(HPE) 1st & 3
rd semester of Mechanical
Engineering along with faculty members
Mr. V. W. Khond and Mr. Y. N. Nandanwar
visited the industry. The credit for the
success of industry visit goes to Dr. P. R.
Bajaj, Director, Dr. P. V. Walke Head
Mechanical Engineering Department, Prof.
V. W. Khond, Co-ordinator,M.Tech (HPE),
Prof. V. S. Khangar (T & P coordinator,
Mech.) and students participants.
Industrial Visit to Superior Drinks
Pvt. Ltd, (Coco Cola), Nagpur by
M. Tech. 1st & 3
rd Semester
students
The department of Mechanical
Engineering of G. H. Raisoni College of
Engineering Nagpur has organized Industrial
visit to Superior Drinks Pvt. Ltd,(Coco
Cola),Nagpur for the students of M-Tech
(HPE ) 1st & 3
rd semester on 24 September,
2014.
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Mr.Amit Sahu, Engineer, give brief
information about the overall functioning of
various departments including, refrigeration,
boiler section and conveyer section. Total 35
students from M-Tech (HPE) 1st & 3
rd
semester of Mechanical Engineering along
with two faculty members Mr. V. W. Khond
and Mr. Y. N. Nandanwar visited the
industry.
The credit for the success of industry
visit goes to Dr. P. R. Bajaj, Director, Dr. P.
V. Walke, Head Mechanical Engineering
Department, Prof. V. W. Khond,
Coordinator, M.Tech (HPE), Prof. V. S.
Khangar (T & P coordinator, Mech.) and
student’s participants
Industry Internship Monitoring
Surprise Visit to Pix Transmissions
Ltd. Surprise visit conducted under
Industry Internship at Pix Transmissions
Ltd. Hingna MIDC, Nagpur. For 7th
semester section B, batch no. B-05, dated on
16/09/2014.
During the visit we found that all the
group members of B-05 batch were present
in company and they were studying and
observing various manufacturing processes
which are used for manufacturing of belts
and hoses.
We also discussed with Mr. Abhijit
Ubarhande, HR-Manager, about punctuality
and performance of student and he is
satisfied with student’s performance. He
added that the students are taking interest to
know the practical things in the
manufacturing of belts. He didn’t allow us
for photographs so we couldn’t able to
provide the glimpses of monitoring.
Industry Internship Monitoring
Surprise Visit to Agrofab
Machinery Pvt. Ltd.
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Surprise visit conducted under
Industry Internship at Agrofab Machineries
Pvt. Ltd. Hingna MIDC, Nagpur. For 7th
semester C, batch no. C-13 and C-14, dated
on 16/09/2014.
During the visit we found that all the
group members of C-13 and C-14 batch
were present in company and they were
studying and observing various
manufacturing processes which are used for
manufacturing of tractor assembly parts.
We also discussed with Mr. Parag Honade,
Supervisor, about punctuality and
performance of student and he is satisfied
with student’s performance.
Industry Internship Monitoring
Surprise visit to Suprior Drinks
Ltd.
During the surprise visit conducted
on 18/08/2014 at Superior drinks Ltd.,
MIDC, Nagpur, all the allotted members of
B16 and C-17 batches were present in the
company. They were studying and observing
various machining processes of bottle
filling. Prof. V. W. Khond and Prof. V.M.
Wankar discussed with Mr. Anand Tiwari,
plant manager about punctuality and
performance of students. He is satisfied with
student’s performance and given the feed
back in prescribed format.
Industry Internship Monitoring
Surprise visit to Bajaj Steel,
Hingna MIDC Nagpur
Surprise visit conducted under
Industry Internship at Bajaj steel industries
limited, MIDC, Hingna, Nagpur for 7th
semester Section C, on dated 25/09/2014 by
Prof. Laukik Raut and Prof. Amol
Chaudhary.
During the visit it is found that all
the group members C-11 batch were present
in company and they were studying and
observing various manufacturing processes
which are used for production of ginning
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
machine. They are also doing case study on
spot welding and seam welding machine
process.
Also Faculty discussed with their
supervisors about punctuality and
performance of student and they are satisfied
with student’s performance.
Industry Internship Monitoring
Surprise visit at Bajaj Steel,
Imamwada, Nagpur
Surprise visit conducted under
Industry Internship at Bajaj Steel,
Imamwada, Nagpur, for 7th semester Section
B, on dated 25/09/2014 by Prof. Laukik
Raut and Prof. Amol Chaudhary.
During the visit it is found that all
the group members of B-2 batch were
present in company and they were studying
and observing various manufacturing
processes.
Also Faculty discussed with their
supervisors about punctuality and
performance of student and they are satisfied
with student’s performance.
Surprise visit under industry
internship at Indrama Synthetic (I)
Ltd. Nagpur
Surprise visit conducted under
Industry Internship at Indorama Synthetic (I)
Ltd. Nagpur for 7th
semester Section B, on
dated 25/09/2014 by Prof. Laukik Raut and
Prof. Amol Chaudhary.
During the visit it is found that all
the group members B-4 and B-9 batch were
present in company and they were studying
and observing various manufacturing
processes.
Also Faculty discussed with their
supervisors about punctuality and
performance of student and they are satisfied
with student’s performance.
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
G. H. RAISONI COLLEGE OF ENGINEERING,NAGPUR
(An Autonomous Institute Under UGC Act1956 )
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Surprise visit under industry
internship at Karamtara
Engineering Pvt. Ltd. Butibori
Nagpur
Surprise visit conducted under
Industry Internship at Karamtara
Engineering Pvt. Ltd. Butibori Nagpur for
7th semester Section B, on dated 25/09/2014
by Prof. Laukik Raut and Prof. Amol
Chaudhary.
During the visit it is found that all
the group members B-4 batch were present
in company and they were studying and
observing various manufacturing processes
which are used for production of towers.
They are also doing case study on waste
reduction in rolling process.
Also Faculty discussed with their
supervisors about punctuality and
performance of student and they are satisfied
with students’ performance.