DATE gfz.t I \3

ARLINGTON COUNTY, VIRGINIA IDSTORICAL AFFAIRS AND LANDMARK REVIEW BOARD APPLICATION FOR CERTIFICATE OF APPROPRIATENESS

,7r __ _ -HD RPC# ------- ------~ (TO BE COMPLETED BY STAFF) I I

DESIGNATED PROPERTY:

I I Name of Historic DiStrict ,MAJ.t w wd Address ofBuil~ing 1 -:;;o-30----,·I,._Jd-.s-f=-----.A-IJ~-t1-lfG.-N;-. ----- --- -

OWNER: I . . Name S(tt f Wt~7 HandtAthtil"t Address (ifd!ffJrentJ ------------------------- -----

Phone (Home) ·ltJ1 b} "t, 1,~ 1- (Work) "7/J ~ 'l~j i Cf07 EMAJL: ~){ant @ lhovkdt flt; a-fttb\t); (..6'11"-PERSoN FaiNd AP LICATION, IF OTHER~ OWNER:

Name

Address

Phone (Home) (Work)

Relationship to r pplicant

PROJECT ARcJ.n:hiENGINEERS/CONTRACTORS:

_ Demolition

Tree Removal I

}(_Alteration

_ New construction

_ Grading

_ Addition

_ Relocation

__ Sign

Fence

___ Outbuildings

Other

Will an application lated to this property go before any of the following? _ Board of Zoning Appeals

_ Planning c f lission _ County Board _ Other (please specify)

Does the proposed 1 ork require a building permit? __ YES X NO

Is any demolitiJn anrcipated? _ YES _ NO If yes, please describe -----------

OVERVIEW OF PROPOSED WORK (ATTACH ADDmONAL SHEETS IF NECESSARY): ,

De"'dpt;on' ~ I~ VIM ( ~ rdjl\. •jllfo. '{lld v ~ 0!/5L aM 1-/-t OV\ -1- up Ia ( G

w~ ~a.vd(t. 5~tn4

(',~\\\~ti!.'St\\U'J..\1\1\)\\\a\tata\\M\ttosott\\V\ndows\1: tm\ll'lfl\tl \nttrntt F\\ts\Conttnt.Out\oo\1.\LW\l'JVWQW\COA.

t...,,\\u\\~\\ ~\'U\\tn ~t~\~ \)tt~~\)tt 1.\\\1.

LETTER OF TRANSMITIAL

Historical Affaid & Landmark Review Board c/o Historic ~res~rvation Program 2100 Clarend,on Boulevard, Suite 700 Arlington, V t 2T201

Dear Review Board Members:

Enclosed is an l pplication for a Certificate of Appropriateness and the following attachments:

D<awt(s - lndieate scale; eaeb d<awing.

sy Pr I Plat -----------------------------

Err Floor Plan

j.J Jtail

Photo~raph(s) - Please indicate number of photographs.

I I Color l \/ Black/White

Matej al S mples/Manufacturer's Catalog Cuts - Please describe all material exhibits.

I I YOUR SIGNAi URE BELOW CONFIRMS YOUR CONSENT TO THE FOLLOWING:

1. I understal d that these materials will be placed in the Historic Preservation Program's building file for inf6rmittion about my property following the public hearing.

2. I undJsta! d it is my responsibility to inform my adjacent neighbors of my building and construction plans for tbis project.

I 3. I hereby g nt permission to the County's Historic Preservation Code Inspector to enter my

property d ring the application and construction phases of my project.

4. nt permission to the County's Historic Preservation Code Inspector to take photographs of my pro rty, including the existing conditions, during the construction phase, and after the project is c mpleted.

C~\\istts\Stan\1\\)\)l>ata\Loca\\Mitroso{t\\V\ndows\'ltmporary \nttrntt \4\\ts\Content.Out\oo\l\'l.W\J9VWQW\COA.

~~~\\t\\\1.\\\ ].\\\3.~\\t'l.l. \\ti\t~ \)ttt\\\\\tt 1.\\\1.

6omJwer: Kathleen S HandertJan & Sean J Pllll!l!fiY Add«iss: 3301 21st Ave N Cjty: A1fingb;1n I I I M1W Cliase Blink. NA

I I .. '· . ....... _ -.

PlAT MAP

State: VA

file No. 21134835

rae No.: !150!166

l I

PREFERRED SIDING, INC. · 2 HERNDON PARKWAY Sli1TE107 HERNDON, VA20170 VA Lie# A2705108261

June 171 2013

Sean Handerhan 3301 21St Avenue, No Arlington, VA 22207 703-731-1907 seanh@marketingatno

tJ1ateria!s to be used:

Scope of Project:

PHONE: 703-318- ·i865 FAX: 703-318-1863 MD HIC 82365 ~\'~B: www.prefer;·edsiciing.com

REVISED MATERIAL 8t LABOR

~~~- ~1St> t~lfi(tf_.

•1.ardiePiank 5" Exposure ColorPius Smooth Lap siding by James Hardie IHardieTrim Boards White and/or Solid PVC Trim Boards as specified

Sidingi Remove existing vinyl siding at addition only.

Install H rdieWrap weather barrier house wrap.

Install H rdiePiank 5 11 Exposure ColorPius Smooth Lap siding at addition only.

TOTAL PRICE SIDING $11,850.00

Trim; At 7 win ows and 1 slider, replace existing window trim with 5/4x4 HardieTrim at 3 sides, in II Solid PVC Trim Board historic sill, and install lx2 Hardie Trim cap at top of t!ndow with Solid PVC Trim Board agee molding. $ 1,400.00

At 3 wir:fows with radius top, install 5/4x4 HardieTrim at 3 sides and install Soh(j PVC Trim Board historic sill. $ 600.00

Repl ce xisting gutter board \Aiith overhang with 1x8 HardieTrim1 replace all 1211

li soffit with Hardie Bead board and 2411 vented soffit with Hardie Bead board

~1 nd 211 pop-in vents. Instail 5/4x4 HardieTrim under the soffit as a i board.

Gu r oards are trim that run horizontally on various locations on your house. In mrst 'Sses, gutters are attached to your gutter board.

Replace 1

xisting rake board with overhang with lxS Hardie Trim, replace all ove~hang solid soffit with 1.r Hardie Bead board. Install5/4x4 HardlieTrim under the soffit as a frieze board.

Rake b ards are trim that run diagonally on various locations on your house.

Replace utside corners with 5/~x4 HardieTrim and inside corners with 5/4x1-/3/4 Ha ieTrim.

Outside omers are trim used on the outside comers of the house. Inside c rners are trim used in inside corners of the house.

I

$ 880.00

$2,782.00

$2,019.00

Sean Handerhan Page 2

Trim; Per Hardie specifications, it is necessary to install 5/4x2 Solid PVC Trim Board at all toof line areas where Hardie siding might come in contact with long terrh moisture.

Caulk wt ere necessary using 051 Quad.

Flas~ w7ere necessary.

Remfve trash and debris from jobsite.

TOTAL TRIM PRICE

TOTAL SIDING & TRIM PRICE

$8,081.00

$19,931.00

$ 400.00

Please note: James ardie siding is installed per manufacturer's specifications. Only ColorPius siding I w· I be touched up with matching touch up paint by James Hardie.

Warranty:

ColorPI s siding will be touched up with matching touch up paint by James Hardie. P I will use best efforts to touch up nails at siding. However, Hardie Touch-up p int color and sheen are not always a perfect match to Hardie ColorPius factory fi ish. As a result, touch up locations might be visible.

All Soli PVC Trim Boards and Hardie Trim are installed by face nailing per manufacturer's s ecification. In many cases, the combination of face nailing and the quantity of nails b ing used to secure the trim, will not have the finished look of newly painted trim. F r this reason we highly recommend a finish coat of paint on all new trim installed.

Any co tract extra work and change orders shall be notified in advance and will only be a ded by mutual agreement in writing.

Prices f.uoted are valid for 45 days.

20 year abor warranty for James Hardie & Solid PVC Trim Boards products installed 2 ~~ear labor warranty for all no;1 James Hardie & Solid PVC Trim Boards products installed

30 y &r IJon prorated, Transferable, Limited warranty for Hardie Siding per manufacturer 25 y ar ~im limited warranty fer Solid PVC Trim Boards per manufacturer 15 y ~ arfpress limited Transferable warranty for Hardie Trim per manufacturer 15 yl ar mish warranty for ColorPius per manufacturer

Preferred Siding, Inc. omplies with the EPA's lead paint handling procedures. We are a Certified Renovator and trained to han~le rhany aspects of lead based paint. Before moving forward with any work on houses built prior io 1978, we ~·11 ~~ed to perform a simple iead paint test. free of charge, to ascertain if any lead based paint exists. if lead ba:fd paint exists, we wiil pro;.• ide ~ quote for the proper and safe removal of any lead based paint affect I b our work on your house. Lead based paint was used prior to 1978.

Hardie Plank

Hardie Panel'

HardieShingle

ARTISAN'Il LAP SIDING

r r~c~., e..s-;: 5 B ! :: .. gLit ~ :2' i:) a:'Y.S

EPI,.ANK~ LAP SIDING

5. i6" 12' pla~ks

Select Cedarmill~ 1,' 'C!t".S. 5.25 ~- i?XD 1 ...

6.25" 15" etp 1.

7 25 o6" e>O.I 8 25 r7 O.D.l

Sierras s z=!: J. 1 a· arc 4' ~ -o

SIDING

Straight Edge Panel ·:~ d'tl· .;s· '"elfin!: i 5 25" 'i e~p.

i 1..' 15'" "1Y_;; I

Smooth

Smooth

I 2B :6 ~'t..p .• ::.ze- :: ~ .:~. t

\'Mills: 5 25' ,4· e~O.I '

~.25" :5· e;:p.l. 7.25" !6" e:jp,), 8.25" i7" .?1.1).;

Stucco SiZes. 4 1. a· anQ "-';,: i o·

AIIIIIIM fan

Staggered Edge Panel \'11®1' 48" Ht:~gllt: 15.375 ,6· 5%;).

Beaded Cedannill=­•i!i!ith: a.2s-1T e>.r.u

CedarmiiP Slz~: 4' ~ B' .ano ·f Y. 10

Individual Shingles

Beaded Smooth Widin. 8.25-1/' e'+'·'

Smooth SIZI?S' J X B MC !. /. Hi

Size:. 4.2:, S 5", 6.75" 7.25·, 10· ~ 1~.25' (i. e~p r·

e.;s· 1. • .1· ~~- ef.!i., ..

CROWN PROFILES Crown mouldrng profiles are typ~eally decoqtrve mouldings designed for use along the intersection of a wall and ceiUng.. Hay be combmed With Olher mouldings to create a "built-up• profile.

........

:.ZJ<••

,.;

AZM.._..

~ lltf.J" ..

2V~<..""

. . ·~

f~J.r,:r.:'~J.Ir-J+'tJ

CASING PROFILES Qosing profiles""' decoraiM! mouldongs typically used ftush against a wall. door or window to create surrounds.

., .

AD'-164 ....... 1\'4.

,~.-

-~---

r

""""' AD< .....

.----,

u~· JD/,u'"

· 1..1(,--. 1\l'l"

~-!111 A2M :ao •r ... - -

wr:-2"

.,..

COVE PROFILES Cove profiles are IYIJically used along lhe •ntenection of a wall and ceiling.

,,._ ....

SHINGLE BAND PROFILES Shingle Band i1o designed for use .:~s a Window

or door casing or as a decorative shoe base.

.... . ·~- .

..,.. .. , ,, .

DRIP CAP PROFILES Dnp Cap IS lyptcaily used as a Willer bJble or brick ledge for separation and Willer shed against two differing material types.

t¥1t'" -

T

SILL PROFILES SiU profiles shed water and offer ardlitectural detaiL

,.,.

GARAGE DOOR THERMOSTOP PopuloT moulding profile desillned to assist With

sealtng new or existing garage door open1ngs tD

rntmmiZe ¥t~eather a nd moisture 1nbus&on.

'I·"

l" -·- -.

PART 1 GENER~L

1.01 SECT!o f INCLUDES

Azd~~.C SECTION 06 60 00

PLASTIC FABRICATIONS

A. Cellular pvc 1rim boards for corner boards, soffits, fascias, baHens, door pilasters, frieze boards, rake boards, architectural millwork and door/window trim.

1.02 RELATE d SECTIONS

A. Section ~6 6~ 00- Plo"ic Paneling.

I I

B. Section 06 65 00 - Plastic Simulated Wood Trim.

C. Section J 6 6b 00 - Custom Ornamental Simulated Woodwork.

1 .03 REFERENCES

A. ASTM D792 Density and Specific Gravity of Plastics by Displacement.

B. ASTM D570 r Water Absorption of Plastics.

C. ASTM 0138 f Tensile Prnperli., of Plo,ics.

D. ASTM 0790 r Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials.

E. ASTM D1761 -Mechanical Fasteners in Wood.

I ASTM D5420 - Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by means of a Striker lmpadted by a Falling Weight.

F.

G. ASTM oJ56 f Detennining lhe Pendulum lmpod Re.i,once of Plo,ia.

H. ASTM Dl96 i Coefficient of Linear Thermal Expansion of Plastics Between -30oC and 30oC with a Vitreous silica Dilatometer.

I I. ASTM 0635 t Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.

ASTM E84 - Surface Burning Characteristics of Building Materials. I

J.

K. ASTM 0648 Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position.

L. ASTM 0367 -Standard Specification for Rigid Poly Vinyl Chloride (PVC) Siding.

A. General: Submit listed submiHals in accordance with Conditions of the Contract and Division 1 SubmiHal Procedures Section.

B. Product D fa: Submit product data, manufacturer's catalogs, SPEC-DATA• product sheet, for specified

~roduds. 9a.Qe' at 4

'i.ed\on Ob bO 00

I 1 .04 SUBMIITT!ALS (continued)

C. Sam~les: Submit three material samples representative of the texture, thickness and widths shown and speci~ied herein.

1 .05 QUALITY ASSURANCE

I A. Regulator Requirements: Check with local Building Code for installation requirements.

B. Allowable Tolerances:

I 1· V:ariotion in component length: -0.00 I + 1.00" 2. Vpriotion in component width: ± 1/16" 3. Variation in component thickness: ± 1 /16" 4. Variation in component edge cut: ± 2" 5. Va riation in Density -0% + 1 0%

C. WorklmaJship, Finish, and Appearance: 1 . Free foam cellular pvc that is homogeneous and free of voids, holes, crocks, and foreign inclu

1 slons and other defects. Edges must be square, and top and bottom surfaces shall be flat with

! I convex or concave deviation.

~ · lniform surface free from cupping, warping, and twisting.

1.06 DELIVERY STORAGE AND HANDLING

A. Tr;m ~at rials should be sto<ed on o flat ond level su<fuce on o full sh;pp;ng pallet. Hondle materials to prj ven damage to product edges and corners. Store materials under a protective covering to prevent j bsite dirt and residue from collecting on the boards.

1.07 WARRt NTY

A. Provide J onufocturer's 25 year warranty against defects in manufacturing that cause the products to rot, cbrro 1 e, delaminate, or excessively swell from moisture.

2.01

A. AcceJ tobl products: AZEK• Trimboords manufactured by Vycom Corporation, 801 Corey Street, Moosic, P. 18507.

B. Material : Free foam cellular pvc material with a small-cell microstructure and density of .55 gram /cm3

•

1. M teriol shall hove a minimum physical and performance properties specified in ection C on the following page.

l'age '2 ol 4 :,eaion Of> 60 00

I 2.03 FINIS i Es!

A. AZE~ prt ucts do not require paint for protection, but may be painted to achieve a custom color.

B. PrepJ ation:

paint adhesion. ·,1 Nbl special surface preparations are required prior to painting - sanding is not necessary for

j Surface must be clean and dry. j If ~esired, nail holes may be filled with polyurethane or acrylic based caulk. j U~e a 1 00% acrylic latex paint with a Light Reflective Value (LRV) of 55 or higher. • Fclllow the paint manufacturer's recommendations to apply.

PART Ill EXE,CUITION

3.01 INSTALL4 TION

A. MonL~rers ;nslrud;on" .

1

1 C9mply with manufacturer's product catalog installation instructions and product technical bJJIIetin instructions.

B. Cutting: I T ~EK products can be cut using the same tools used to cut lumber. j C · rbide tipped blades designed to cut wood work well. Avoid fine tooth metal cutting blades . .

1

R ugh edges from cutting may be caused by excessive friction, poor board support, or worn or i proper tooling.

C. Drilling T AZEK products can be drilled using the same tools used to drill lumber . •

1

Dlilling AZEK products is similar to drilling a hardwood. Care should be taken to avoid fribtional heat buildup.

j u fe standard woodworking drills. Do not use drills made for normal rigid pvc. i Periodic removal of AZEK shavings from the drill hole may be necessary.

D. Milling I T AZEK products can be milled using standard milling machines used to mill lumber. j RJiief Angle 20o to 30" i c1 tting speed to be optimized with the number of knives and feed rate.

E. Routi~g I i ~EK products can be routed using standard router bits and the same tools used to rout lumber . .

1

Cbrbide tipped router bits are recommended.

F. Edge Fini)hing j Edles can be finished by sanding, grinding or filing with traditional woodworking tools.

G. Nail Location f u i e 2 fasteners per every framing member for trimboard applications. • Trimboards over 12" or wider, as well as sheets, will require additional fasteners. • Fdsteners must be installed no more than 2" from the end of each board.

I H. Thermal ~pension and Contraction

• AZEK products expand and contract with changes in temperature.

• en properly fastened, allow for 1 /8" per 18 foot of AZEK product for expansion and contraction. • ~perly fastening AZEK material along its entire length will minimize expansion and contraction.

• nts between pieces of AZEK should be glued to eliminate joint separation. When gaps are g ed on a long run of AZEK, allow expansion and contraction at ends of the run.

t.\\\0 Of CSECHON l'oge 4 ol4 Secl"•on Ob bb 00

PROPERh UN ITS VALUE ASTM METHOD

PHYSICAL Density Water Absorptiol

MECHANIC L Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Nail Hold Screw Hold Staple Hold Gordner Impact Chorpy Impact (@23PC)

THERMAL Coefficient of Linear Expansion Burning Rate I

Flame Spread Index Heat Deflection Tempb264 psi Oil Conning (@114oor)

2.02 ACCE, SORY PRODUCTS

A Fasteners:

psi psi psi psi

Lbf/in of penetration Lbf/in of penetration Lbf/in of penetration

in-lbs ft-lbs

in/inrF in/min

0.55 0.15

2256 144,000

3329 144,219

35 680 180 103 4.5

3.2 X 10-5 No burn when flame removed

25 150

Passed

D 792 D 570

D 638 D 638 D 790 D 790 D 1761 D 1761 D 1761 D 5420 D 256

D 696 D 635

E 84 D 648 D 648

1 uJe fosleners designed for wood trim and wood siding (thinner shank, blunt point, full round head) with AZE~. j U, e o highly durable fastener such os stainless steel or hot-dipped galvanized.

St?ples, small brads and wire nails must not be used as fastening members. THe fasteners should be long enough to penetrate the solid wood substrate o minimum of 1 1/2". Stbndord nail guns work well with AZEK trim products. uj'e 2 fasteners per every framing member for trimboords applications. Trimboords 12" or wider, OS

w II as sheets, will require additional fasteners . F steners must be installed no more than 2" from the end of each board. AZEK should be fastened into a flat, solid substrate. Fastening AZEK into hollow or uneven areas mLst be avoided.

1 ~-drilling is typically not required unless a Iorge fastener is used or product is installed in low temperatures .

.

1

3"8" and 1 /2" sheet product is not intended to be ripped into trim pieces. These profiles must be glued to a substrate and mechanically fastened.

B. Adhesives! • Glue all AZEK to AZEK joints such as window surrounds, long fascia runs, etc. with AZEK Adhesive, a

cellular pvc cement, to prevent joint separation. • The glue joint should be secured with a fastener and/or fastened on each side of the joint to allow

o~equote bonding time. • AZEK Adhesive has o working time of 1 0 minutes and will be fully cured in 24 hours. • If ~tondord pvc cements ore used, keep in mind these produds typically cure quickly which will result

in limited -1orking time and may reduce adhesive strength. • Su~oces to be glued should be smooth, clean and in complete contact with each other. • To l_bond AZEK to other substrates, various adhesives may be used. Consult adhesive manufacturer to

djermine suitability.

C.. ~e~\on\s: , ~~~ \l~~\'Nlt\e, ~o\~u~e\1mme ot oc.'{'f\\c. \loseo seo\on\s ..,.,\\'nou\ s\\\c.one. l'oge 3 ol 4

~•onObbbOO

TECHNICAL BULLETIN - PAINT Building Products

November, 2006

BACKGROUND: AZEK Trim does not require paint for protection; however, AZEK products may be painted to achieve a custom color or appearance. AZEK Tnm, the number one brand of trim, can now be painted dark colors thanks to The Sherwin-Williams Company's V1nyiSafeTM Color Technology. Information on this and other suitable exterior coatings which can be applied to our trimboards are listed below. This information has been provided to us by the ind1v1dual paint manufacturer. AZEK Building Products does not specify paint brands and will not warrant or accept liability for the performance of field applied coatings.

COMPANY PRODUCTS TESTED LRV* PROCESS/ RESULTS

Sherwin-Williams Company Satin Latex Systems: For use • All products tested in same manner. Architectural Services Dept. Satin Finish with • Boards were cleaned of surface 101 Prospect Avenue, NW . First Coat: S-W SuperPaintR; paint contaminants; however, no solvents Cleveland, OH 44115 VinyiSafeTM Exterior Latex LRVs or sanding was used. (BOO) 321-B194 Acrylic Satin, AB9 Series above • First coat was applied and dned 24 (216) 566-1392 fax . Second Coat: S-W SuperPaintR'• or hours prior to second coat be1ng

VinyiSafeTM Exterior Latex below applied. Acrylic Satin, AB9 Series 55 • Boards were allowed to dry for 7 (4 mils wet, 1.44 mils dry days. per coat) • Cross hatch test was conducted

with no loss of adhesion between Flat Latex Systems: coating and trim board. Flat Finish . First Coat S-W SuperPaint@. Additional painting guidelines can be

VinyiSafeTM Exterior Latex found at www.sherwin-williams.com or Acrylic Flat, ABO Series by calling 1·888-SHERWIN. . Second Coat: S-W SuperPaint(® VinyiSafeTM Exterior Latex Acrylic Flat, ABO Series (4 mils wet, 1.44 mils dry per coat)

PPG Architectural Coatings Pittsburgh Paints: Only . All products tested in same manner. 151 Colfax Street for use . Boards were cleaned of dirt, grease, Springdale, PA 15144 Manor Hall with mildew and other surface contaminants. (724) 274-4500 - Exterior Flat - 74 line paint . Paint, air and surface temperatures

Manor Hall LRVs should be above 50"F for best - Exterior Eggshell - 79 line above application and adhesion.

Manor Hall 55 . Adhesion testing included applying

- Exterior Semi-Gloss - 75 line paint to the board by brush and Manor Hall

- Exterior Gloss - 52 line allow to dry overnight.

Sun Proof . The cross hatch test was performed .

- Exterior Flat - 72 line . The cut area is sealed and board is Sun Proof placed in recirculation water shower

- Exterior Semi-Gloss - 7B line for 4 hours then in 0 • F freezer for 16 hours.

Porter Paints: . After this process, board is returned to room temperature and cross

Acri-Shield LTC hatch test re-conducted. - Gloss - 550 line . This process repeated 2 times. In

Acri-Shield LTC most cases, adhesion improved - Satin - 590 line over time.

* Light Reflective Value

TBP03/11/06

-I m n :c z -n )>

r

to

c r r m -I -z

z -1-w ..J

..J

:::> DJ

..J

<(

u -z :I: u w 1-

COMPANY PRODUCTS TESTED LRV PROCESS/ RESULTS

Duron Paints & Process 1: Only 0 Boards were cleaned of surface Wallcoverings 0 First Coat: Duron Bond-N- for use contaminants; however, no sol-10406 Tucker Street Seal 100% Acrylic House with vents or sanding was used. Beltsville, MD 20705-2297 Paint Primer paint 0 First coat applied and dried 24 (301) 937-4600 0 Second Coat: Duron LRVs hours prior to second coating.

Weathershield Exterior above 0 Board allowed to dry for 14 days. 100% Acrylic House Paint 55 0 Cross hatch test conducted Semi-Gloss Finish with no loss of adhesion

between coating and tnmboard.

Process 2: 0 Boards were cleaned of surface 0 First Coat: Duron contaminants; however, no sol-

Weathershield Exterior vents or sanding was used. 100% Acrylic House Paint 0 First coat applied and dried 24 Semi-Gloss Finish hours prior to second coating.

0 Second Coat: Same as 0 Board allowed to dry for 14 days. above. 0 Cross hatch test conducted

with adequate adhesion between coating and trimboard.

ICI Paints Dulux Exterior Latex Satin Only 0 Samples were first sanded using 4401 Lyman Drive Finish for use 180 grit sandpaper and then Hilliard, OH 43026-2201 with cleaned to remove dirt, dust, 614-771-7812 paint oily residues and contaminants.

LRVs 0 The coating was then applied to above the clean, dry substrate without 55 the use of a primer.

o The coating was allowed to cure for seven (7) days prior to cross hatch adhesion testing .

0 Good adhesion was observed.

o AZEK products do not require paint for protection; but may be painted to achieve a custom color. o Use a 100% acrylic latex paint with a Light Reflective Value (LRV) of 55 or higher. o For paint colors equivalent to an LRV of 54 or lower, paints specifically designed for such

applications must be used, such as Sherwin-Williams VinyiSafeTM coatings. o Always follow the paint manufacturer's recommendation, in general no special surface

preparation is required prior to painting. o Ensure the AZEK Trim is clean and dry . o Moisture cycling is a main reason for coating failure on wood. Since AZEK products do not

absorb moisture, paints last longer on AZEK products than on wood.

AZEK Building Products, Inc. 801 Corey Street o Scranton, PA 18505 www.azek.com o (877) ASK-AZEK o Fax: 570-504-1215