GERARD DANIEL WORLDWIDE · 2014. 10. 31. · Screen Printing The Highest Standards of Screen Print...
1
GERARD DANIEL WORLDWIDE www.gerarddaniel.com Information may change without notice. Contact your sales representative All information presented is subject to copyright © 2009 Gerard Daniel Worldwide. V.08.13 * Wire Diameter (mm) ** Meshes Are Plain Weave with Thickness Control +/- 2 Micron Screen Printing The Highest Standards of Screen Print Mesh Screen Print Mesh Specifications Mesh Diameter* Opening Open Area Mesh Thickness** 80 105 145 165 180 200 200 230 250 270 280 300 325 325 400 400 500 0.265 0.165 0.120 0.105 0.096 0.087 0.074 0.075 0.016 0.054 0.055 0.055 0.055 0.050 0.045 0.038 0.030 0.050 0.076 0.056 0.050 0.045 0.040 0.053 0.035 0.040 0.040 0.035 0.030 0.023 0.028 0.018 0.025 0.020 71 47 45 46 46 47 33 46 37 34 38 42 50 41 51 38 36 0.10 0.31 0.23 0.21 0.18 0.16 0.26 0.15 0.20 0.22 0.17 0.14 0.09 0.13 0.07 0.13 0.11 Screen Print Applications • Printed screen boards • Back-lit panels • Resistors and capacitors • Membrane keypads • Optical displays in membrane keypads • Decals • Scales • Multilayer • Thick film circuited • Soldering paste processing for SMD • Glass printing • Graphic and commercial screen printing Stainless Steel Screens Advantages vs. Polyester • Thin wires close diameter tolerance and offer very high tensile strength • Firm and stable weave with precise openings for better registration • Higher percentage open area • Lowest possible distortion with the lowest possible snap-off • No stretching under squeegee pressure means better registration and printing accuracy • Structural stability up to 600°C • Best level of abrasion resistance • No tendency to creep • No electrostatic charging • No absorption of moisture or solvents • No change in volume, loss of tension, or shrinkage tendencies • Good release of media from the screen • Service life several times longer, maximizing production and cost efficiency
Transcript of GERARD DANIEL WORLDWIDE · 2014. 10. 31. · Screen Printing The Highest Standards of Screen Print...
GERARD DANIEL WORLDWIDE
www.gerarddaniel.com
Information may change without notice. Contact your sales representativeAll information presented is subject to copyright © 2009 Gerard Daniel Worldwide. V.08.13
* Wire Diameter (mm)
** Meshes Are Plain Weave with Thickness Control +/- 2 Micron
Screen PrintingThe Highest Standards of Screen Print Mesh
Screen Print Mesh Specifications
Mesh Diameter* Opening Open Area Mesh Thickness**
80105145165180200200230250270280300325325400400500
0.2650.1650.1200.1050.0960.0870.0740.0750.0160.0540.0550.0550.0550.0500.0450.0380.030
0.0500.0760.0560.0500.0450.0400.0530.0350.0400.0400.0350.0300.0230.0280.0180.0250.020
7147454646473346373438425041513836
0.100.310.230.210.180.160.260.150.200.220.170.140.090.130.070.130.11
Screen Print Applications• Printed screen boards• Back-lit panels• Resistors and capacitors• Membrane keypads• Optical displays in membrane keypads• Decals• Scales• Multilayer• Thick film circuited• Soldering paste processing for SMD• Glass printing• Graphic and commercial screen printing
Stainless Steel Screens Advantages vs. Polyester• Thin wires close diameter tolerance and offer very high tensile strength• Firm and stable weave with precise openings for better registration• Higher percentage open area• Lowest possible distortion with the lowest possible snap-off• No stretching under squeegee pressure means better registration and printing accuracy• Structural stability up to 600°C• Best level of abrasion resistance• No tendency to creep• No electrostatic charging• No absorption of moisture or solvents• No change in volume, loss of tension, or shrinkage tendencies• Good release of media from the screen• Service life several times longer, maximizing production and cost efficiency
