Georgia 16 2013

8
By Cindy Riley CEG CORRESPONDENT Students exploring technology-related careers can now enjoy a cutting-edge facility in Millidgeville, Ga., offering everything from virtual patients to sophisticated computer labs. In April 2013, Central Georgia Technical College (CGTC) in Macon held a ribbon cutting ceremony for the new center for health sciences building at its Millidgeville campus. The facility is 77,704 sq. ft. (7,218.9 sq m) and cost roughly $15 million. “We worked with our system office and our legislative delegation for almost eight years to get the funding for the building,” said Hank Griffeth, vice president of satellite operations at CGTC. “That seems like a long period of time, but it’s typical of capital improvement project funding, so the project can be planned, vetted and ultimately funded in manner that is a good use of taxpayer dollars. The design and construction took another two years, so there was much pride in being able to open this facility.” The building is three floors and brick, stone and glass was used to create a mountain- style that involves a modern bend with sharp lines and cantilever windows, accord- ing to Griffeth. The stone is used on the exterior and continues into the interior where it meshes with terraz- zo flooring along with glass stair rails and maple-wood accents. “The building site was a nice open field,” said Ronny Williams, the project man- ager of general contractor Chris R. Sheridan. “We installed two retention ponds and removed pine trees. The project went extremely well for the most part.” Crews did minor rock removal for footings and under- ground pipes, but were not delayed. The building was water- tight before installing any of the masonry, windows and metal panels. This allowed interior work to begin early with- out concern of rainy weather. Some challenges included coordinating the curtain wall system with the metal panel skin. The project had a com- missioning agent for the envelope and the MEP systems that took a lot of time and coordination, according to Williams. Classes resumed in May by moving the current health sci- ences programs from the original building on the campus to the new building. New programs are starting that were planned for the building during the fall semester. Additionally, community entities have already used the con- ference center that is part of the building, and bookings for it are coming in at a steady rate, Griffeth said. He added the new facility comes with a significant price tag . “With the FFE funding that is used to equip it, the total approaches $20 million total, said Griffeth. “We appreciate the taxpayers of our state making that investment in us and in the students we train. The original building for this cam- pus was built about 20 years ago to accommodate 500 stu- dents. The student population has more than doubled and the need for additional classroom and lab space was an absolute necessity. The decision to plan the building to house just health sciences programs was made in an effort to expand those programs and to begin the planning for future growth in a manner that created specialized classroom and lab facilities.” The building will be the location for all health sciences programs for the campus, including practical nursing, med- ical assisting, medical coding, medical skin care, clinical lab technology and neuromuscular therapy. CGTC contains labs for biology, chemistry and physics, as well as class- rooms and computer labs for psychology and sociology CGTC Invests in New Health Sciences Building GEORGIA STATE EDITION A Supplement to: Your Georgia Connection: Rich Olivier, Atlanta, GA • 1-800-409-1479 “The Nation’s Best Read Construction Newspaper… Founded in 1957.” Bainbridge Macon Albany Athens Atlanta Augusta Columbus Rome Savannah Valdosta Thomasville Moul- trie Tifton Blakely Cuthbert Cordele McRae Douglas La Grange Ameri- cus Milledgeville Dublin Oak Park Lyons Dorchester Waycross Bruns- wick Pearson Statesboro Swainsboro Griffin Madison Cornella 75 75 75 16 16 20 20 85 59 185 95 85 27 19 441 441 441 441 19 19 27 82 27 82 82 341 341 1 301 301 84 84 84 319 82 1 129 1 Chris R. Sheridan & Co. General Contractors photo Crews perform grading work at the CGTC job site. see CGTC page 6 August 7 2013 Vol. XV • No. 16 Chris R. Sheridan & Co. General Contractors photo In April 2013, Central Georgia Technical College in Macon held a ribbon cutting cer- emony for the new center for health sciences building at its Millidgeville campus.

description

Georgia 16 2013

Transcript of Georgia 16 2013

Page 1: Georgia 16 2013

By Cindy RileyCEG CORRESPONDENT

Students exploring technology-related careers can nowenjoy a cutting-edge facility in Millidgeville, Ga., offeringeverything from virtual patients to sophisticated computerlabs. In April 2013, Central Georgia Technical College(CGTC) in Macon held a ribbon cutting ceremony for thenew center for health sciences building at its Millidgevillecampus. The facility is 77,704 sq. ft. (7,218.9 sq m) and costroughly $15 million.“We worked with our system office and our legislative

delegation for almost eight years to get the funding for thebuilding,” said Hank Griffeth, vice president of satelliteoperations at CGTC. “That seems like a long period of time,but it’s typical of capital improvement project funding, sothe project can be planned, vetted and ultimately funded inmanner that is a good use of taxpayer dollars. The designand construction took another two years, so there was muchpride in being able to open this facility.”The building is three floors and brick, stone and glass was

used to create a mountain-style that involves a modernbend with sharp lines andcantilever windows, accord-ing to Griffeth. The stone isused on the exterior andcontinues into the interiorwhere it meshes with terraz-zo flooring along with glassstair rails and maple-woodaccents.“The building site was a

nice open field,” said RonnyWilliams, the project man-ager of general contractorChris R. Sheridan. “Weinstalled two retentionponds and removed pinetrees. The project wentextremely well for the mostpart.” Crews did minor rock removal for footings and under-

ground pipes, but were not delayed. The building was water-tight before installing any of the masonry, windows andmetal panels. This allowed interior work to begin early with-out concern of rainy weather.Some challenges included coordinating the curtain wall

system with the metal panel skin. The project had a com-

missioning agent for the envelope and the MEP systems thattook a lot of time and coordination, according to Williams. Classes resumed in May by moving the current health sci-

ences programs from the original building on the campus tothe new building. New programs are starting that wereplanned for the building during the fall semester.Additionally, community entities have already used the con-ference center that is part of the building, and bookings for it

are coming in at a steady rate, Griffeth said.He added the new facility comes with a significant price

tag .“With the FFE funding that is used to equip it, the total

approaches $20 million total, said Griffeth. “We appreciatethe taxpayers of our state making that investment in us andin the students we train. The original building for this cam-pus was built about 20 years ago to accommodate 500 stu-dents. The student population has more than doubled andthe need for additional classroom and lab space was anabsolute necessity. The decision to plan the building tohouse just health sciences programs was made in an effort toexpand those programs and to begin the planning for futuregrowth in a manner that created specialized classroom andlab facilities.”The building will be the location for all health sciences

programs for the campus, including practical nursing, med-ical assisting, medical coding, medical skin care, clinical labtechnology and neuromuscular therapy. CGTC containslabs for biology, chemistry and physics, as well as class-rooms and computer labs for psychology and sociology

CGTC Invests in New Health Sciences Building

GEORGIA STATE EDITION A Supplement to:

Your Georgia Connection: Rich Olivier, Atlanta, GA • 1-800-409-1479

“The Nation’s Best Read Construction Newspaper… Founded in 1957.”Bainbridge

Macon

Albany

Athens

Atlanta

Augusta

Columbus

Rome

Savannah

ValdostaThomasville

Moul- trie

Tifton

Blakely

Cuthbert

CordeleMcRae

Douglas

La Grange

Ameri- cus

Milledgeville

DublinOak Park

Lyons

Dorchester

Waycross Bruns- wickPearson

Statesboro

Swainsboro

Griffin

Madison

Cornella75

75

75

16

16

20

20

85

59

185

95

85

27

19

441

441

441

441

19

19

27

82

27

82

82

341

341

1301

301

84

8484319

82

1129

1

Chris R. Sheridan & Co. General Contractors photoCrews perform grading work at the CGTC job site.

see CGTC page 6

August 72013

Vol. XV • No. 16

Chris R. Sheridan & Co. General Contractors photoIn April 2013, Central Georgia Technical College in Macon held a ribbon cutting cer-emony for the new center for health sciences building at its Millidgeville campus.

Page 2: Georgia 16 2013

Page 2 • August 7, 2013 • www.constructionequipmentguide.com • Georgia State Supplement • Construction Equipment Guide

*See dealer for details. Some exclusions may apply.Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries.©2013 Bobcat Company. All Rights Reserved. 13-B078

Bobcat of Atlanta

· 3-year/3,000-hour powertrain warranty

· Free loaner

· Free 50-hour service

TAKE ADVANTAGE OF THESE GREAT OFFERS FROM BOBCAT OF ATLANTA*

DOWNTIME

IS NOTAN OPTION

1

2

3

REASONS BUSINESSTODO3

WITH

AKE ADTTAKE ADV

AGE OF THE ANTTAGE OF THESE GREA DV VANT

T SE GREA AT

· Free loaner

AKE ADTTAKE ADVOFFERS FROM BOBCA

1

3

2

· Free loaner

AGE OF THE ANTTAGE OF THESE GREA DV VANTT OF S FROM BOBCA AT OF A

T SE GREA AT A*TLANTTA* F A ATLANT

Bobcat of Atlanta

770-242-6500

Detacbo BdzeirohtAu

3

Bobcat of Atlanta real De

Some exc*See dealer for details.tBobca ® istered trademarks of Bobcat logo are reg and the Bobca

All Rights Reser.yt Compan©2013 Bobca

770-850-1443atlanta.com.bobcatofwww

.pplylusions may a Some exctes and various other countries.y in the United Stat Companistered trademarks of Bobca

13-B078ved.All Rights Reser

atlanta.com

tes and various other countries.

Page 3: Georgia 16 2013

Construction Equipment Guide • Georgia State Supplement • www.constructionequipmentguide.com • August 7, 2013 • Page 3

$500 for 500 HOUR SERVICE &MACHINE INSPECTIONWithin 60 mile radius

3341

www.jcbofgeorgia.com

1008 East Hwy 80 | Pooler, GA 31322888-809-3612

Compact Machines With Big ResultsWith over 30 models of Skid Steers, Tracked Loaders and Mini Excavators, JCB’s full range of compact equipment will cover all your needs. And with certified technicians, JCB of Georgia provides the service you need to keep your business moving. And that will definitely keep you smiling. Contact us today for more information.

THE JCB COMPACT EQUIPMENT RANGE

Page 4: Georgia 16 2013

Page 4 • August 7, 2013 • www.constructionequipmentguide.com • Georgia State Supplement • Construction Equipment Guide Construction Equipment Guide • Georgia State Supplement • www.constructionequipmentguide.com • August 7, 2013 • Page 5

Page 5: Georgia 16 2013

Page 4 • August 7, 2013 • www.constructionequipmentguide.com • Georgia State Supplement • Construction Equipment Guide Construction Equipment Guide • Georgia State Supplement • www.constructionequipmentguide.com • August 7, 2013 • Page 5

Page 6: Georgia 16 2013

Page 6 • August 7, 2013 • www.constructionequipmentguide.com • Georgia State Supplement • Construction Equipment Guide

courses. The library for the campus is locat-ed on the second floor for use by all studentsattending the college or taking online classeswho live in this geographic area. A confer-ence center and business and industry train-ing center is located on the first floor.Included are eight standard classrooms,

eight computer labs, six programmatic labs,three science labs, 14 faculty offices, twoadministrative office suites, conference cen-ter quads, a boardroom, a catering kitchen,three lobby areas, an information technologyserve room, a computer repair area and atechnician office area.“Everyone has been amazed at the

appearance and functionality of the build-ing,” said Griffeth. “The building is on a hillon the campus, and many citizens have men-tioned to me how attractive it is from theroad, but they’re even more impressed whenthey see the inside. The students love it andoften comment about the environment andthe technology they have available to them.”“The new structure and the existing one

are separated by a huge parking lot, so weactually took some of those spaces and cre-ated a park setting with benches for studentswho have to hike across from one building to

the other, because it is a pretty good dis-tance,” said Kamal Azar, architect of AzarWalsh. Although not LEED-certified, the struc-

ture was designed to be green, from environ-mentally friendly mechanical devices to theinstallation of energy saving light sensors. Inaddition, the building offers the latest tech-nology.The teaching labs had simulated hospital

head walls and beds just like a hospital

room, according to Williams, and included adummy patient that talked. “Unlike when the original building on

campus was constructed, our vision for tech-nical education focused on students makinga choice to earn a degree in this field, andpursue a career,” said Azar. “We approachedthis as more of a traditional university, asopposed to just a ‘technical college’, whichwas a huge departure in concept. The HealthSciences building needed to reflect what’s

out there today, including large medical labsfor different trades. We tried to make labs thesame as you’d see in the actual work place.The key was meeting with each departmenthead and professor and getting input so theywouldn’t be disappointed with the finishedproduct. This meant lots of coordinationwith different people.”Central Georgia Technical College was

established as Macon Area Vocational-Technical School in 1962 through jointaction of the Georgia State Board ofEducation and the Bibb County Board ofEducation. The school is a two-year publiccommuter college offering on-site and dis-tance education academic programs andservices, adult education, continuing educa-tion and customized business and industryservices.Construction on the Milledgeville

Campus began in 1996, with the campusopening in late 1997. In 2000, the schoolwas renamed Central Georgia TechnicalCollege to better represent the seven-countyarea it serves.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG

Builders Focus on Environmentally Friendly Designs

Chris R. Sheridan & Co. General Contractors photoThe building was watertight before installing any of the masonry, windows andmetal panels.

Mike Calendar, Covington service center manager, presents a check to Larry Gill, veteran’s liaison ofHomes for Our Troops.

The Atlas Copco service centerin Covington, Ga., hosted a rib-bon cutting and open house April26 in celebration of a 9,000 sq. ft.expansion. The addition, whichnearly doubles the previous workarea, will increase workshop effi-ciency by separating compressorand generator refurbishmentoperations from smaller unit serv-icing and non-refurbishment jobs.Joey Parker, now Atlas Copco

service operations manager forthe United States, was managingthe Covington workshop twoyears ago when plans for expan-sion were first set in place. Heindicated that the additional spacewould virtually eliminate disrup-tion to refurbishment operationsby separating it from non-refur-bishment work, improving work-place efficiency. Mike Calendar, current shop

manager, said the expansion hasallowed him to add team mem-bers, with some technicians des-ignated as refurbishment special-ists. Up to 10 large units can nowundergo refurbishment simulta-neously, while smaller unit refur-

bishment and non-refurbishmentwork will be performed in twoseparate bays. Adrian Ridge, president of

Atlas Copco ConstructionTechnique’s Service division,traveled from the Belgium officeto attend the grand opening.During the celebration, Ridgepresented the center with theAtlas Copco Safety and HealthAward for 5,050 consecutiveworking hours without a lost-timeinjury. In further recognition of the

achievement, Ridge awarded acheck for $7,622 to the servicecenter’s employees to donate to acharity of their choice.Employees chose Homes for OurTroops, which builds and donateshouses to wounded veterans. Thehouses are customized for eachveteran’s specific needs to pro-vide them with maximum free-dom of movement and the abilityto live more independently.

(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)

Atlas Copco Celebrates Expansion During Open House

CGTC from page 1

Page 7: Georgia 16 2013

Construction Equipment Guide • Georgia State Supplement • www.constructionequipmentguide.com • August 7, 2013 • Page 7

www.reynoldswarren.comE-Mail: [email protected]

1-800-875-5659 or 404-361-15931945 Forest ParkwayLake City, GA 30260

Georgia’s One Stop Shop For Everything Asphalt

YES...We Rent What We Sell!

SweepPro

SweepPro Features:• 7’-6” Quick-Change Brush

• Two-Door ROPS Climate Controlled Cab

• Engine choice: 74 HP Tier 4i Turbo Diesel Kubota or Cummins Engine

• Rear Steering With 6-Foot Inside Turning Radius

• Brush Down-Pressure Control

• 150-Gallon Brush Watering System

• Joystick Controls

Contact your Rosco Dealer

VT LeeBoy, Inc. • 500 Lincoln County Parkway Ext. • Lincolnton, NC 28092 • Call (704)966-3300 • www.leeboy.com

3 Asphalt Pavers (Sizes range from 10,000 - 33,000 lbs)

3 Asphalt Rollers

3 Motor Graders

3 Pot Hole Patchers

3 Brooms

3 Asphalt Distributors

3 Concrete Curber

3 Conveyor Belt Loaders

Every Solution for Your Paving Needs

VT LeeBoy, Inc. • 500 Lincoln County Parkway Ext. • Lincolnton, NC 28092 • Call (704)966-3300 • www.leeboy.com

Tru-Pac 915 CSH Chip Spreader RA-400 Spray Patcher

Page 8: Georgia 16 2013

Page 8 • August 7, 2013 • www.constructionequipmentguide.com • Georgia State Supplement • Construction Equipment Guide

www.komatsuamerica.com

Efficient Komatsu Tier 4 Interim engine and advanced hydraulic system maximize productivity while providing up to 5% lower fuel consumption.Increased lift capacity with a larger machine design and a reinforced undercarriageKomatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

The Komatsu PC490LC-10 provides more power, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs.

PC490LC-10From Komatsu - The Excavator Experts

.komatsuamerica.comwww

.komatsuamerica.com

AlabamaDolthan334-678-1832334-678-1598

Birmingham205-591-2131205-592-7581

Birmingham205-591-2131205-591-1309

Mobile251-457-8991251-457-6003

Montgomery334-288-6580334-288-6584

Birmingham205-591-8327205-592-7685

Alabaster205-621-2489205-621-2488

Tuscaloosa205-752-0621205-752-1948

Decatur256-355-0305256-355-0311

Shoals Area251-275-4159205-383-5566

Anniston256-831-2440256-835-0981

FloridaPanama City850-763-4654850-785-3279

Pensacola850-505-0550850-505-0551

GeorgiaKennesaw678-354-5533678-354-5577

Forest Park404-366-0693404-366-9688

Hoschton706-654-9850706-654-9856

Savannah912-330-7500912-330-7490

Albany229-435-0982229-435-5259

Augusta706-798-7777706-798-3237

Calhoun706-879-6200706-629-1134

Columbus706-562-1801706-562-9897

Macon478-745-6891478-745-7291