GENERAL WELDING WORKS, INC. - vihn.netpmi.vihn.net/auction/Files/4_1000000264_General Welding...

GENERAL WELDING WORKS, INC.

LOT QTY DESCRIPTION

1 1 PIPE THREADER, RIDGID MDL. 1822-1, on fabricated stand, S/N

EA22403-1104

2 1 PIPE, CONDUIT & BOLT MACHINE, TELEDYNE OSTER 2", Mdl.

654, on fabricated stand, S/N AAN327

3 1 MAGNETIC DRILL, MILWAUKEE, S/N 9823914

4 1 CHOP SAW, DEWALT 14", S/N 073811

5 1 LOT OF PNEUMATIC VERTICAL GRINDERS (3), 7-1/2"















20 1 LOT OF EXTENDED PNEUMATIC GRINDERS (2), 7"




24 1 LOT OF PNEUMATIC DIE GRINDERS

25 1 LOT OF PNEUMATIC DIE GRINDERS

25A 1 LOT OF PNEUMATIC DIE GRINDERS

26 1 LOT OF RIGHT ANGLE PNEUMATIC GRINDERS, 4"








33A 1 LOT OF RIGHT ANGLE PNEUMATIC GRINDERS

33B 1 LOT OF RIGHT ANGLE PNEUMATIC GRINDERS

33C 1 LOT OF RIGHT ANGLE PNEUMATIC GRINDERS

33D 1 LOT OF PNEUMATIC CHISEL SCALERS

34 1 LOT OF PNEUMATIC CHISEL SCALERS






40 1 LOT OF STRAIGHT IN-LINE GRINDERS (2)

41 1 LOT OF HORIZONTAL GRINDERS (2), 7-1/2"


LOT QTY DESCRIPTION







48 1 PNEUMATIC IMPACT GUN, INGERSOLL RAND 2"

49 1 LOT OF PNEUMATIC IMPACT GUNS (2), INGERSOLL RAND 1"

50 1 LOT OF PNEUMATIC IMPACT GUNS (2), INGERSOLL RAND 1"

51 1 LOT OF PIPE GRINDERS (2), CUSTOM 8'

52 1 LOT CONSISTING OF BOLT CUTTERS, WRENCHES, LEVELS,

PIPE WRENCHES, HAMMERS, ETC. (in wheel barrel)

52A 1 LOT CONSISTING OF 1 T. CHAIN HOISTS (2), C-CLAMPS, 3 T.

PLATE LIFTERS

53 1 LOT OF SLEDGE HAMMERS (approx. 13)

54 1 LOT OF LETTER/NUMBER STEEL STAMPS, various sizes

55 1 FABRICATED SHELF UNIT, 14'L. x 6' ht. x 4' dp. (one week delayed

removal)

56 1 FABRICATED SHELF UNIT, 14'L. x 6' ht. x 4' dp. (one week delayed

removal)

57 1 PORTABLE OFFICE BUILDING, 12' x 12', entry door, (2)

windows, A/C, assorted furnishings

57A 1 AIR RECEIVER TANK, 150 gal. cap.

57B 1 LOT CONSISTING OF 8' X 8' X 4' GANG BOX, SHELVING & HOOKS

58 1 PLATE EDGE MILL, MASTER MACHINE TOOLS, 460 v., 3 phase,

6.5 amps

59 1 ABRASIVE CUT-OFF SAW, KALAMAZOO 20", 10 HP drive motor

60 1 HYDRAULIC SYSTEM, ENERPAC, w/rams




64 1 PORTABLE CIRCULAR BURNING MACHINE, CYPRESS

WELD-GO-ROUNDS MDL. CB-5, 44" dia. rd. platen w/3-jaw

welding chuck, S/N D961121



welding chuck, S/N C91976



welding chuck, S/N K91996

66A 1 LOT OF STORAGE LOCKERS, 14' x 6' x 3', H.D.

66B 1 PIPE BEVELER, MATLEY DEARMAN 30", Mdl. 3103

66C 1 PIPE BEVELER, H&M 30", Mdl. 2C

67 1 SHOP FAN, 50", H.D.

68 1 SHOP FAN, 50", H.D.

69 1 SHOP FAN, 36", H.D.

70 1 SHOP FAN, 36", H.D.


LOT QTY DESCRIPTION

71 1 SHOP FAN, 36", H.D.

72 1 SHOP FAN, 30", H.D.

73 1 SHOP FAN, 26", H.D.

74 1 SHOP FAN, 26", H.D.

75 1 SHOP FAN, 26", H.D.

76 1 SHOP FAN, 26", H.D.

77 1 SHOP FAN, 26", H.D.

78 1 SHOP FAN, 26", H.D.

79 1 SHOP FAN, 26", H.D.

80 1 SHOP FAN, 26", H.D.

81 1 SHOP FAN, 26", H.D.

82 1 SHOP FAN, 26", H.D.

83 1 SHOP FAN, 26", H.D.

84 1 PEDESTAL SHOP FAN, 24"

85 1 SHOP FAN, 26", H.D.

86 1 SHOP FAN, 26", H.D.

87 1 SHOP FAN, 26", H.D.

88 1 SHOP FAN, 26", H.D.

89 1 SHOP FAN, 26", H.D.


91 1 SHOP FAN, 26", H.D.

92 1 SHOP FAN, 26", H.D.

93 1 PEDESTAL FAN, 24"



96 1 SHOP FAN, 32", H.D.



99 1 SHOP FAN, 44", H.D.

100 1 WELDING POSITIONER, ARONSON 120,000 LB. CAP., Mdl.

G1200, 120,000 lbs. @ 12" L.C., 1,440,000 lbs. of rotational

torque, 2,808,080 lbs. of tilt torque, fixed base, 120" rd. platen,

operator’s catwalk & stairs, S/N G3608

101 1 WELDING POSITIONER, VANGUARD 33,000 LB. CAP., Mdl. HB150,

85" dia. table, pwr. tilt, variable spd. rotation, spds: .02-.2 RPM, 460 v.,

S/N 480662

102 1 WELDING POSITIONER, RANSOME 20,000 LB. CAP., Mdl.

200P, 20,000 lbs. @ 12" L.C., S/N 2225225

103 1 WELDING POSITIONER, RANSOME 16,000 LB. CAP., Mdl.

160P, 16,000 lbs. @ 12" L.C., 52" sq. platen, S/N 1979

104 1 WELDING POSITIONER, ARONSON 10,000 LB. CAP., Mdl.

HD100A, rebuilt by WeldWire Co. of Texas, 10,000 lbs. @ 12"

L.C., adj. height base, 60" dia. rd. platens, S/N 81449

105 1 WELDING POSITIONER, WELDWIRE 4,500 LB. CAP., Mdl. WPT-

45/12 AB, hand & foot controls, 48" dia. table w/42" pipe gripper chuck,

460 v. input, S/N 12537

106 1 WELDING POSITIONER, PRESTON EASTIN 4,500 LB. CAP.,

42" sq. platen, Pandjiris 3-jaw welding chuck


LOT QTY DESCRIPTION

107 1 WELDING POSITIONER, RANSOME 4,500 LB. CAP., Mdl. 45P,

S/N 6510556

108 1 WELDING POSITIONER, PANDJIRIS 3,000 LB CAP., Mdl. 30-

6, S/N 800-146301

109 1 WELDING POSITIONER, UPRIGHT 2,500 LB. CAP., Mdl. 2500,

S/N 11-77

110 1 WELDING POSITIONER, ARONSON 2,500 LB. CAP., Mdl. HD-

25A, S/N 731168

110A 1 JIB CRANE, w/Coffing 5 T. cap. hoist

110B 1 HOIST, P&H 5 T. CAP.

111 1 INVINCIBLE FLUX VACUUM

112 1 INVINCIBLE FLUX VACUUM, Mdl. 490, 1.5 HP motor, S/N

39K151


114 1 INVINCIBLE FLUX VACUUM, Mdl. 390, 3 HP motor, S/N 115 1 INVINCIBLE FLUX VACUUM, Mdl. 490, 1.5 HP motor, S/N

44K052


117 1 LOT OF BLOWER FANS (3) (on one pallet)

118 1 DRY ROD OVEN, PHOENIX MDL. 950FX, vert. load




122 1 HORIZONTAL DRY ROD OVEN, PHOENIX MDL. 900


124 2 HORIZONTAL DRY ROD OVENS, PHOENIX MDL. 900

124A 1 DRY ROD OVEN BOX


126 2 DRY ROD OVENS, PHOENIX MDL. 300, on rolling cart

127 1 DRY ROD OVEN, PHOENIX MDL. 300 128 1 DRY ROD OVEN, PHOENIX MDL. 300

129 1 DRY ROD OVEN, PHOENIX MDL. 300




133 1 DRY ROD OVEN, PHOENIX MDL. 300 134 1 DRY ROD OVEN, PHOENIX MDL. 300 135 1 DRY ROD OVEN, PHOENIX MDL. 300


136A 1 DRY ROD OVEN, PHOENIX MDL. 300

137 1 LOT OF DRY ROD OVENS, PHOENIX MDL. 108 (approx. 10)

138 1 HEATED FLUX HOPPER, 5' x 2-1/2'

139 1 LOT OF STORAGE LOCKERS, 11' x 5' x 2-1/2', H.D.

140 1 DOUBLE END PEDESTAL GRINDER, 220, H.D.

141 1 DOUBLE END PEDESTAL GRINDER, BUFFALO, 2 HP motor, 1 ph.

142 1 DOUBLE END PEDESTAL GRINDER, BALDOR, 3/4 HP motor


LOT QTY DESCRIPTION

143 1 HYDROSTATIC PUMP, DAYTON MDL. PSI5100, 1,500 PSI,

5.55 GPM plunger pump, 15 HP drive motor, fabricated steel

frame 144 1 HYDROSTATIC PUMP, GENERAL PUMP, T Series 47 Mdl.

TS2021 plunger pump, 15 HP drive motor, mtd. fabricated steel

frame

145 1 TRASH PUMP, DAYTON MDL. 4HU80 146 1 TRASH PUMP, DAYTON MDL. 4HU80

147 1 LOT OF STORAGE LOCKERS, 6' x 4' x 2-1/2', H.D.

148 1 GANG BOX, 6' x 8' x 3', H.D.

149 1 GANG BOX, 5' x 4' x 2', H.D.

150 1 PORTABLE OFFICE BUILDING, 12' x 12' entry door, multiple

windows, A/C unit

151 1 LOT OF RIGGING CHAINS & SLINGS

151A 1 AUTOMATIC GIRTH WELDER, ROMAR MDL. AGW-2H-18/35, dual

sided, S/N 4045-01

152 1 LOT OF FLANGE BOLTS (for vessel flanges)


154 1 LOT OF BLIND FLANGES, in various sizes & bolt patterns, 5" up

to 5' 155 1 LOT OF SOCKETS, 7/8" up to 5", H.D., assorted, on shelves


157 1 HYDRO WATER HEATER, CUSTOM

158 1 WELDING MACHINE, MILLER MDL. CP/CC-1500P, 1,500

amps @ 44 v., 100% duty cycle, S/N JB561290

159 1 WELDING MACHINE, MILLER MDL. CP/CC-1500P, 1,500

amps @ 44 v., 100% duty cycle, S/N JC620025

160 1 WELDING MACHINE, LINCOLN IDEALARC MDL. AC1200,

1,200 amps @ 44 v., 100% duty cycle, S/N AC846174

161 1 WELDING MACHINE, LINCOLN IDEALARC MDL. AC1200,

1,200 amps @ 44 v., 100% duty cycle, S/N AC826270

162 1 WELDING MACHINE, MILLER DIMENSION MDL. 1000, new 2004,

1,000 amps @ 44 v., 100% duty cycle, S/N LE315747

163 1 WELDING MACHINE, MILLER MDL. SRS1000-A1, 1,000 amps @ 40

v., 100% duty cycle, S/N N.A.

164 1 WELDING MACHINE, MILLER MDL. CP750E, 750 amps @ 44 v.,

100% duty cycle, S/N N.A.


100% duty cycle, S/N N.A.

166 1 WELDING MACHINE, MILLER MDL. SHR666, 600 amps @ 40 v.,

60% duty cycle, S/N JC643927

167 1 WELDING MACHINE, MILLER MDL. SRH666, 600 amps @ 40 v.,



60% duty cycle, S/N HF880541


60% duty cycle, S/N HJ117405




LOT QTY DESCRIPTION

171 1 WELDING MACHINE, MILLER DIMENSION MDL. 652, 650 amps @

44 v., 100% duty cycle, S/N KH419718

172 1 WELDING MACHINE, MILLER DELTAWELD MDL. 652, new 2005,

650 amps @ 44 v., 100% duty cycle, S/N LF159651

173 1 WELDING MACHINE, MILLER DELTAWELD MDL. 652, 650 amps @

44 v., 100% duty cycle, Miller 70 Series 24 v. wire feeder, S/N

KG102438



KJ216111175 1 WELDING MACHINE, MILLER DIMENSION MDL. 652, 650 amps @

44 v., 100% duty cycle, S/N KF844065


44 v., 100% duty cycle, S/N KH419720


44 v., 100% duty cycle, S/N KF844068


44 v., 100% duty cycle, S/N KF838537


44 v., 100% duty cycle, S/N KF851366

180 1 WELDING MACHINE, MILLER INTELLIWELD MDL. 650, 650 amps

@ 44 v., 100% duty cycle, Miller S-54A 115 v. constant spd. wire

feeder, S/N KB019625

181 1 WELDING MACHINE, LINCOLN IDEALARC MDL. DC600, 600 amps

@ 44 v., 100% duty cycle, S/N N.A.

182 1 WELDING MACHINE, LINCOLN IDEALARC MDL. DC600, new 2011,

600 amps @ 44 v., 100% duty cycle, S/N U1110410366




@ 44 v., 100% duty cycle, S/N N.A.




















LOT QTY DESCRIPTION


@ 44 v., 100% duty cycle, S/N AC842707

195 1 WELDING MACHINE, MILLER IDEALARC MDL. DC600, 600 amps @

44 v., 100% duty cycle, Lincoln LN-7 wire feeder, S/N AC730450


@ 44 v., 100% duty cycle, S/N AC431514


@ 44 v., 100% duty cycle, S/N AC531250

198 1 WELDING MACHINE, MILLER GOLDSTAR MDL. 600SS, 600 amps

@ 44 v., 60 duty cycle, S/N KB032683


@ 44 v., 60 duty cycle, S/N JE791332


@ 44 v., 60 duty cycle, S/N KA822218


@ 44 v., 60 duty cycle, S/N KB046575

202 1 WELDING MACHINE, MILLER MDL. SR600-42, 600 amps @ 40 v.,

60% duty cycle, S/N U503377


@ 40 v., 60% duty cycle, S/N KBG43433


60% duty cycle, S/N JA384995



206 1 WELDING MACHINE, MILLER GOLDSTAR MDL. 452, new 2001, 450

amps @ 38 v., 60% duty cycle, S/N LB314759






amps @ 38 v., 60% duty cycle, S/N LF470880C










60% duty cycle, S/N KJ127367

215 1 WELDING MACHINE, MILLER MAXTRON MDL. 450 CC/CV, 450

amps @ 38 v., 100% duty cycle, Miller S-60 wire feeder, S/N

KG226486216 1 MIG WELDER, ESAB MDL. SVI450I CV/CC, Digipulse wire feeder


60% duty cycle, S/N HH038109


60% duty cycle, S/N HK293466


LOT QTY DESCRIPTION



220 1 WELDING MACHINE, MILLER MDL. CP250TS, 250 amps @ 35 v.,

100% duty cycle, S/N JH204923


60% duty cycle, S/N HK296026


60% duty cycle, S/N JA360372

223 1 WELDING MACHINE, MILLER MDL. CP302, new 2000, 300 amps @


LA276020224 1 WELDING MACHINE, MILLER MDL. CP302, new 2000, 300 amps @


LA276022225 1 WELDING MACHINE, MILLER MDL. CP302, new 2000, 300 amps @


LA276012226 1 WELDING MACHINE, MILLER MDL. CP250TS, 250 amps @ 35 v.,



100% duty cycle, S/N JB530444


100% duty cycle, S/N HH038468


100% duty cycle, S/N KB014946

230 1 WELDING MACHINE, MILLER SYNCROWAVE MDL. 250DX, new

2001, 250 amps @ 30 v., 40% duty cycle, foot pedal, TIG torch, S/N

LB240820

231 1 MULTI-BANK WELDING MACHINE, THERMAL-ARC "8-BANK"

WELDER FRAME, 400 amp, main power connection box

232 1 PORTABLE WELDER GENERATOR, MILLER BIG BLUE MDL.

502D, new 2002, diesel engine, S/N LC019535

233 1 PORTABLE WELDER, MILLER MDL. BIG 50, diesel engine,

350 amps @ 34 v., 100% duty cycle, 15 amp 120 v. output AC

generator, on skid frame, S/N KK150640

234 1 WELDING GENERATOR, MILLER BIG BLUE MDL. 400D, Deutz,

diesel engine, 400 amps @ 40 v., 100% duty cycle, 9,320 H.O.M., S/N

JF845843

235 1 WELDING GENERATOR, MILLER BIG BLUE MDL. 400D, diesel

engine, 400 amps @ 40 v., 100% duty cycle, S/N KJ228175

236 1 STUD WELDING SYSTEM, PROWELD MDL. ARC-800, w/gun

& accessories, S/N 800-196-606

237 1 WIRE FEEDER, LINCOLN ELECTRIC MDL. LN-8, on fabricated stand

238 1 WIRE FEEDER, MILLER, 24 v., constant speed (on one pallet)

239 1 WIRE FEEDER, MILLER 70 SERIES, 24 v., on fabricated stand

240 1 WIRE FEEDER, MILLER, on fabricated stand

241 1 WIRE FEEDER, MILLER S-52E, 115 v., constant speed, on fabricated

stand

242 1 WIRE FEEDER, MILLER S-52E, 115 v., constant speed, on fabricated

stand

243 1 LOT OF WIRE FEEDERS, MILLER (for parts use) (on one pallet)


LOT QTY DESCRIPTION

244 1 LOT OF WIRE FEEDERS (2), MILLER (for parts use) (on one pallet)

245 1 BACKPACK WELDER, LINCOLN ELECTRIC LN-25 PRO, w/hose

246 1 BACKPACK WELDER, LINCOLN ELECTRIC LN-25 PRO, w/hose

247 1 LOT OF BACKPACK WELDERS (4), LINCOLN ELECTRIC LN-25

PRO (on one pallet)

248 1 LOT OF BACKPACK WELDERS (3), LINCOLN ELECTRIC LN-25

PRO (on one pallet)

248A 1 PLASMA CUTTER, ESAB MDL. PCM-1125

249 1 ARC WELDER, PLASMA NEEDLE PWN-9

250 1 PLASMA CUTTER, PLASMARC PCM-100, w/new gun

251 1 PLASMA CUTTER, THERMAL-ARC MERLIN MDL. PAK15XC,

plasma cutting torch.

252 1 WELDING MACHINE, MILLER DIMENSION MDL. 1000, 1,000 amps

@ 65 v., 100% duty cycle, S/N KJ161778 (needs repair)

253 1 WELDING MACHINE, MILLER MDL. SRS1000-A1, 1,000 amps @ 40

v., 100% duty cycle, S/N JF842816 (needs repair)


100% duty cycle, S/N JB568557 (needs repair)


100% duty cycle, S/N 71572466 (needs repair)


60% duty cycle, S/N HJ213725 (needs repair)


100% duty cycle, S/N 72620770 (needs repair)


60% duty cycle, S/N HF865744 (needs repair)






44 v., 100% duty cycle, S/N KJ216785 (needs repair)


44 v., 100% duty cycle, S/N KH419722 (needs repair)


44 v., 100% duty cycle, S/N KG113522 (needs repair)


44 v., 100% duty cycle, S/N KF795765 (needs repair)

265 1 WELDING MACHINE, LINCOLN MDL. DC650 PRO, 600 amps @ 44

v., 100% duty cycle, S/N U1970711186 (needs repair)

266 1 WELDING MACHINE, MILLER MDL. MP65E, 650 amps @ 44 v.,

100% duty cycle, S/N 1118/0834 (needs repair)


@ 44 v., 100% duty cycle, S/N AC518353 (needs repair)


@ 44 v., 60% duty cycle, S/N KA21365 (needs repair)




LOT QTY DESCRIPTION






@ 44 v., 60% duty cycle, S/N KA822219 (needs repair)


60% duty cycle, S/N JA384996 (needs repair)

274 1 WELDING MACHINE, MILLER GOLDSTAR MDL. 452, 450 amps @

38 v., 60% duty cycle, S/N KJ212238 (needs repair)


60% duty cycle, S/N HJ165835 (needs repair)


60% duty cycle, S/N JB539063 (needs repair)


60% duty cycle, S/N KJ127424 (needs repair)

278 1 WELDING MACHINE, MILLER MDL. CP300, 300 amps @ 32 v.,

100% duty cycle, Miller wire feeder, S/N HH003785 (needs repair)


100% duty cycle, Miller 60 Series 24 v. wire feeder (needs repair)


100% duty cycle, S/N N321764 (needs repair)

281 1 LOT OF STORAGE LOCKERS, H.D., (3) sets

282 1 PLATE BENDING ROLL, BERTSCH 10' CAP., pyramid design,

approx. 20" dia. top roll, 14" dia. lower roll, 75 HP main drive

motor, hyd. drop end, pwr. lower roll adj., recently refurbished &

rewired w/new control system, S/N N.A.

283 1 WELDING MANIPULATOR, RANSOME 27' X 30', 10' boom

extension, twin wire sub-arc head w/Lincoln Mdl. NA-3S & NA-3

weld controllers, flux hopper, invincible flux vacuum unit, Weld

Engineering Mdl. SPS1500 flux heater & blower unit, Lincoln Mdl.

AC1200 welding pwr. supply, Lincoln Mdl. DC-650 PRO welding

pwr. supply, pwr. rotation base, cart base unit that is currently

mtd. to a steel plate, S/N 6311823

284 1 WELDING MANIPULATOR, PANDJIRIS APPROX. 21' X 19',

twin wire sub-arc arrangement, Lincoln Mdl. NA-3S & NA-3 sub-

arc weld controllers, car base w/pwr. rotation, currently mtd.

heavy steel base plate, Lincoln Mdl. AC1200 welding pwr. supply,

S/N AC579666, Lincoln Idealarc Mdl. DC1500 welding pwr.

supply, S/N AC750501

285 1 WELDING MANIPULATOR, RANSOME APPROX. 14' X 14', car

base, 160" runway travel, twin wire sub-arc arrangement, Lincoln

Mdl. NA-3 & Mdl. NA-3S sub-arc weld controllers, Lincoln Idealarc

Mdl. AC1200 welding pwr. source, S/N U1001236441, Lincoln

Mdl. DC1000 welding pwr. source, S/N U1968517001, flux box


LOT QTY DESCRIPTION

286 1 STRIP OVERLAY SYSTEM, ARONSON 14' X 14', Mdl.

SSL4VRA14CLPK, manual boom rotation, fixed base w/heavy

steel base plate, Preston-Eastin Mdl. SH12E strip overlay head, 2-

axis slide, flux box, Miller Mdl. HD1500DX sub-arc controller, (2)

Miller Mdl. Dimension 1000 welding pwr. supplies, S/N LF090423,

S/N LF090409, Miller parallel controller unit

287 1 WELDING MANIPULATOR, RANSOME 14' X 14', car base, 14'

car travel, manual rotation, assorted welding equipment

288 1 STRIP OVERLAY SYSTEM, PRESTON-EASTIN APPROX. 13'

X 14', manual rotation, Preston-Easton Mdl. SH-12E strip overlay

head, variable spd. car travel, approx. 20' of car travel, car mtd.,

Miller Mdl. CP/CC1500 pwr. supply, 1,500 amps @ 44 v., 100%

duty cycle, S/N KA845217, Lincoln Mdl. NA-3S sub-arc weld

controller, flux box, sgl. axis horiz. slide

289 1 WELDING MANIPULATOR, RANSOME 12' X 12', Mdl. 12X12, manual

rotation, fixed base on heavy steel base plate, sgl. wire sub-arc

w/Lincoln Mdl. NA-3S sub-arc controller, flux box, Lincoln Idealarc Mdl.

DC1000 pwr. supply, S/N U1960715316, flux box, S/N 1413

290 1 WELDING MANIPULATOR, RANSOME 12' X 12', twin wire sub-arc

arrangement, Lincoln Mdl. NA-3 & NA-3S weld controlled units, fixed

base, manual rotation, heavy steel base plate, Lincoln Idealarc Mdl.

DC1000 pwr. supply, S/N U1940625061, Lincoln Mdl. AC1200 welding

pwr. supply, S/N AC760338

291 1 WELDING MANIPULATOR, RANSOME 12' X 12', fixed base, sgl. wire

sub-arc, Lincoln Mdl. NA-3S sub-arc controller, flux box, Lincoln

Idealarc Mdl. DC1000 pwr. supply, S/N A0835050, fixed base, manual

rotation w/heavy steel base plate

292 1 WELDING MANIPULATOR, CAYUGA 11' X 14', fixed base, approx.

10' boom extension, Lincoln Mdl. NA-3S sub-arc weld head, wire

feeder, approx. 6'L. knuckle boom swing extension, fixed base

w/geared pwrd. rotation, Lincoln Idealarc Mdl. DC1000 pwr. supply,

1,000 amps @ 44 v., 100% duty cycle, S/N U150319324

293 1 WELDING MANIPULATOR, ARONSON 8' X 8', Mdl. SG80VRA8CL-

PX, 8' x 8' travels, spider base, assorted welding equipment, S/N

MM82310

294 1 WELDING MANIPULATOR, ARONSON 6' X 6', Mdl. Aronson Locust

1, lift travel 97" approx., overall ht. 122", reach travel 72" approx.,

overall length of arm 96" x base w/wheels

295 1 SUBARC WELDING SYSTEM, SYSTEM CONSISTS OF: Lincoln

Electric MDL. DC600 600 amp pwr. supply, S/N AC683366, NA-3 head

& control, S/N U1980119292, 10" pwrd. crosslide, flux vacuum, welding

& control cables

295A 1 POWER TORCH CROSSLIDE, PANDJIRIS MDL. 61-M, S/N

10350X06-11

295B 1 POWER TORCH CROSSLIDE, PANDJIRIS MDL. 61-M, S/N

10350X06-15

296 1 SPREADER BAR, CUSTOM 23'

297 1 SPREADER BAR, CUSTOM 10'


LOT QTY DESCRIPTION

298 1 LOT OF RIGGING CHAINS, SHACKLES & PLATE DOGS (in metal

tub)

299 1 LOT OF RIGGING CHAINS & NYLON STRAPS (in metal tub)

300 1 LOT OF RIGGING CHAINS & NYLON STRAPS (in metal tub)

301 1 LOT OF MISC. RIGGING EQUIPMENT: rigging chains, shackles, plate

dogs, pry bars (in metal tub)

302 1 LOT OF RIGGING CHAINS (on one pallet)

303 1 LOT OF RIGGING CHAINS & CHAIN LINKS (in one box)

304 1 LOT OF RIGGING CABLE, 2" thk., up to 15'L., w/hooks

305 1 5-AXIS CNC PLASMA BURNING MACHINE, ESAB AVENGER MDL.

1-18VISPC, new 2005, Esab Vision-PC CNC control system, 5-axis

CNC bevel head, standard adj. ht. bevel head, Arcwriter plasma

stencilling unit, oxy. fuel cutting head w/motorized torch adj., (2) manual

set oxy. fuel plasma bevelling heads, 18' max. cutting width, 40' max.

cutting length, ESAB Mdl. ESP-600C plasma pwr. supply, ESAB Mdl.

WC-7C coolant circulator, ESAB Precision Plasma Arc pwr. supply, 17'

x 40' water table, S/N 0560939683

306 4 LOCKABLE TOOLBOXES, CUSTOM, H.D.

307 1 POWER TURNING ROLL SET, ARONSON 1,000 T. CAP. DRIVER &

IDLER ROLL SET, Mdl. WSD-1000, 10"W. x 40" dia. wheels, 30 HP

motor

308 1 DRIVER ROLL, RANSOME 500 T. CAP., 25 HP AC drive, variable

spd.

309 1 TANK TURNING ROLL, TELEDYNE 400 T. CAP., Mdl. HPR-400T

driver, S/N 340740, idler, S/N 102420, 6" x 30" steel wheels, remote

pendant control, variable spd.

310 1 POWER TURNING ROLL SET, TELEDYNE READCO 400 T. CAP.

POWER & IDLER SET, dual 28" dia. x 6"W. rubber tires w/steel

overload discs, approx. 94" dist. btn. centers, Reeves type variable

spd. drive, No. 1 A & B

311 1 POWER TURNING ROLL SET, ARONSON 300 T. CAP. POWER &

IDLER SET, steel overload discs, dual 26" x 6" rubber wheels, Reeves

Type variable spd. drive, 112" max. wheel centers, No. 2 A & B

311A 1 POWER TURNING ROLL SET, ROMAR 300 T. CAP. DRIVER &

IDLER ROLL SET


IDLER SET, dual 26" x 6" rubber tires w/steel overload discs, SCR

variable spd. drive, pendant control, approx. 115" wheel centers, No. 3

A & B


POWER & IDLER SET, 30" dia. x 6" roll face, steel wheels, Reeves

type variable spd. drive, 102" max. wheel centers, No. 4 A & B


POWER & IDLER SET, 30" dia. x 6" roll face, steel wheels, Reeves

type variable spd. drive, 102" max. wheel centers, No. 5 A & B

315 2 IDLER ROLLS, RANSOME 200 T. CAP., 28" dia. x 6"W. steel wheels,

approx. 102" wheel centers, No. 6B, No. 7B

316 2 IDLER ROLLS, RANSOME 200 T. CAP., 28" dia. x 6"W. steel wheels,

approx. 102" wheel centers, No. 8B, No. 9B


LOT QTY DESCRIPTION


POWER & IDLER SET, 28" dia. x 6"W. rubber tires w/overload discs

(tires missing), Reeves type variable spd. drive, pendant control, 120"

wheel centers, No. 10 A & B


POWER & IDLER SET, 28" dia. x 6"W. steel wheels, approx. 102"

max. wheel centers, Reeves type variable spd. drive, No. 11 A & B

318A 1 IDLER ROLL, ARONSON 120 T. CAP.

318B 1 IDLER ROLL, ARONSON 120 T. CAP.

318C 1 IDLER ROLL, CUSTOM 120 T. CAP.

318D 1 LOT OF USED IDLER ROLLS (2), ROMAR 120 T. CAP.


POWER & IDLER SET, 28" dia. x 6"W. rubber tires w/overload discs

(tires missing), Reeves Type variable spd. drive, pendant control, 120"



POWER & IDLER SET, 30" dia. x 6" roll face, steel wheels, approx.

120" max. wheel centers, variable spd., No. 13 A & B

321 1 POWER TURNING ROLL SET, RANSOME 200 T. CAP. POWER &

IDLER SET, 30" dia. x 6" roll face, approx. 102" max. wheel centers,

heavy gear drive, pendant control, variable spd., No. 14 A & B


IDLER SET, 28" dia. x 6"W. steel wheels, SCR variable spd. drive,

102" max. wheel centers, No. 15 A & B

323 1 TANK TURNING ROLL SET, PRESTON EASTIN 120 T. CAP., Driver

Mdl. TDRA120-HD, S/N TDRA120HD-109, Idler Mdl. TIRA120-HD, S/N

163, 24"W. x 20" dia. rubber wheels, hand pendant control, variable

spd., 460 v. input


IDLER SET, 24" x 8" steel wheels, approx. 96" wheel centers, No. 16 A

& B

325 1 POWER TURNING ROLL SET, TELEDYNE READCO 100 T. CAP.,

POWER & IDLER SET, 24" x 6" steel wheels, 84" max. wheel centers,

SCR variable spd. drive, No. 47 A & B

325A 1 MULE IDLER ROLL, PANDJIRIS 60 T. CAP.

326 1 POWER TURNING ROLL SET, CUSTOM 40 T. CAP. POWER &

IDLER SET, 22" dia. x 7"W. triple rubber tires, 21" ttl width, approx. 64"

max. wheel centers, variable spd. drive, No. 18 A & B


POWER & IDLER SET, wide frame design, dual 22" x 8"W. rubber

tires, 29" overall roller width, 88" max. wheel centers, Reeves variable

spd. drive, No. 19 A & B


IDLER SET, 22" dia. x 9"W. dual rubber tires, 56" max. wheel centers,

Reeves type variable spd. drive, No. 20 A & B


IDLER SET, dual 20" dia. x 7"W. rubber tires w/steel overload discs,

110" max. wheel centers, Reeves type variable spd. drive, No. 21 A &

B


LOT QTY DESCRIPTION


POWER & IDLER SET, 14"W. x 22" dia. rubber tires, approx. 84" max.



IDLER SET, 20" dia. x 7"W. triple rubber tires, 21" overall roller width,

86" max. wheel centers, SCR variable spd. drive w/brake motor, No. 23

A & B


IDLER SET, 20" dia. x 7"W. triple rubber tires, 64" max. wheel centers,



IDLER SET, dual 20" dia. x 7"W. rubber tires w/steel overload discs,

96" max. wheel centers, Reeves type variable spd. drive, No. 25 A & B


IDLER SET, 20" dia. x 7"W. sgl. rubber tire w/steel overload discs, 64"

max. wheel centers, SCR variable spd. drive, No. 26 A & B

335 1 POWER ROLL (no idler), RANSOME 20 T. CAP., 22" dia. x 7"W. dual

rubber tires, approx. 94" wheel centers, Reeves type variable spd.

drive, No. 27A

336 1 LOT OF TURNING ROLLS, 20 T. CAP., idler only


IDLER SET (partial idler), 21" dia. x 6"W. dual rubber tires w/overload

discs, approx. 88" wheel centers, No. 29 A & B

338 1 IDLER ROLL, RANSOME 20 T. CAP., 20" dia. x 8"W. dual rubber tires

w/steel overload discs, approx. 96" wheel centers, No. 30B

339 1 IDLER ROLL, RANSOME 20 T. CAP., 22" dia. x 8"W. triple rubber

tires, approx. 90" wheel centers, No. 31B

340 1 IDLER ROLL, RANSOME 20 T. CAP., 22" dia. x 8"W. triple tires,

approx. 88" wheel centers, No. 32B

341 1 IDLER ROLL, RANSOME 20 T. CAP., 21" dia. x 8"W. triple tires,

approx. 92" wheel centers, No. 33B

342 1 IDLER ROLL, 20 T. CAP.

343 1 RAIL MOUNTED POWER & IDLER TURNING ROLL SET,

RANSOME, 24" dia. x 17"W. steel wheel, approx. 102" wheel centers,

Reeves type variable spd. drive, (2) idlers, mtd. on rail cart w/50" rail

centers, No. 50A, B & C


TELEDYNE READCO, 24" dia. x 15-1/2"W. wheel, 51" wheel centers,

(2) idler sets, mtd. on rail cart w/50" rail centers, No. 45A, B & C


RANSOME, 24" dia. x 14-1/2"W. steel wheels, approx. 55" wheel

centers, mtd. on rail cart w/50" rail centers, (2) idler sets


IDLER SET, 22" dia. x 7"W. dual rubber tires, 14" ttl. width, approx. 48"


347 1 POWER TURNING ROLL SET, 20 T. CAP. POWER & IDLER SET,

20" dia. x 7"W. dual rubber tires, approx. 64" wheel centers, Reeves

type variable spd. drive, No. 35 A & B


LOT QTY DESCRIPTION

348 1 POWER ROLL (no idler), RANSOME 20 T. CAP., 22" dia. x 7"W. dual

rubber tires, approx. 72" wheel centers, SCR variable spd. drive, No.

36A


IDLER SET, 16" dia. x 2-1/2"W. quad rubber tires, 10" ttl. width, 56"



IDLER SET, 20" dia. x 8"W. rubber tire w/steel overload discs, approx.

42" wheel centers, constant spd. drive, No. 38 A & B

351 1 POWER TURNING ROLL SET , WEBB 5 T. CAP. POWER & IDLER

SET, 12" dia. x 3"W. dual rubber tires, approx. 56" max. wheel centers,


352 1 POWER TURNING ROLL SET, PRESTON EASTIN 5 T. CAP.

POWER & IDLER SET, 12" dia. x 4"W. sgl. rubber tire, approx. 62"

max. wheel centers, constant spd. drive motor, No. 40 A & B

353 1 TURNING ROLL, 5 T. cap., idler only

354 1 TURNING ROLL, WEBB 5 T. CAP., idler only

355 1 TURNING ROLL, EASTON 5 T. CAP., idler only

356 1 POWER ROLL (no idler), RANSOME 20 T. CAP., 20" dia. x 7"W. wide

frame triple tires, 18" ttl. width, approx. 94" max. wheel centers, Reeves

type variable spd. drive, No. 46A


IDLER SET, 28" dia. x 12"W. rubber tires, constant spd. rotation motor,

96" max. wheel centers, No. 48 A & B


IDLER SET, 20" dia. x 6"W. dual rubber tires, 91" max. wheel centers,

sgl. rubber tire idler, No. 49 A & B

359 1 OVERHEAD BRIDGE CRANE, WHITING 60 T. X APPROX. 82' SPAN,

top running, dbl. box girder, approx. 70' under hook, AC pwd., pendant

control, 10 T. aux. hoist, radio control, S/N N.A.

360 1 OVERHEAD BRIDGE CRANE, P&H 175 T. X 81'-3" SPAN, 175 T.

cap. main & 60/15 T. cap. aux. hoists, cab operated, DC, Alliance

spreader bar, S/N 6977MT (Unit 39) (Located in Bldg. 38-B)

361 1 OVERHEAD BRIDGE CRANE, MORGAN 150 T. X 100' SPAN, 150 T.

cap. main & 25 T. cap. aux. hoists, cab operated, DC, S/N 4457 (Unit

167) (Located in Bldg. 15-E) (Sold by photo)

361A 1 OVERHEAD BRIDGE CRANE, MORGAN 30/30 T. X 100' SPAN W/25

T. AUX. HOIST, top riding bridge, top riding hoist, DC, cab operated,

S/N 7555 (Unit 81) (Located in Bldg. 15-C) (Sold by photo)

362 1 OVERHEAD BRIDGE CRANE, SHAWBOX 40 T. X 100' SPAN, (2) 20

T. cap. hoists, cab operated, DC, S/N 56-31758 (Unit 163) (Located in

Bldg. 6-A) (Sold by photo)


T. cap. hoists, cab operated, DC, S/N 51-31231 (Unit 154), (Located in



T. cap. hoists, cab operated, DC, S/N 51-31232 (Unit 155), (Located in



LOT QTY DESCRIPTION

364A 1 OVERHEAD BRIDGE CRANE, CLEVELAND 30 T. X 62-6" SPAN,

pendant, DC, S/N C-8035 (Unit 530) (Located in Bldg. 17B) (Sold by

photo)

365 1 OVERHEAD BRIDGE CRANE, ALLIANCE 25 T. X 96' SPAN, cab

operated, DC, S/N 6360 (Unit 180) (Located in Bldg. 38-D) (Some

parts are missing - Please inspect) (Sold by photo)

366 1 OVERHEAD BRIDGE CRANE, MORGAN 15 T. X 96' SPAN, 15 T.

cap. hoist, DC, pendant, S/N 6034 (Unit 78) (Located in Bldg. 20-A)

(Sold by photo)

367 1 OVERHEAD BRIDGE CRANE, P&H 15 T. X 96' SPAN, 15 T. cap.

hoist, pendant, DC, S/N 17392 (Unit 79) (Located in Bldg. 21-B) (Sold

by photo)

367A 1

OVERHEAD BRIDGE CRANE, MORGAN, 15 T. X 96' SPAN, top

riding bridge, top riding hoist, DC, S/N 6354 (Unit 81) (Located in Bldg.

21-B) (Sold by photo)

368 1 OVERHEAD BRIDGE CRANE, P&H 15 T. X 70', pendant, DC, S/N

19159 (Unit 160) (Located in Bldg. 15-F) (Sold by photo)

369 1 OVERHEAD BRIDGE CRANE, P&H 10 T. X 47' SPAN, pendant, DC,

S/N 13661-B/19057-T (Unit 40) (Located in Bldg. 17-A) (Sold by

photo)

369A

1 OVERHEAD BRIDGE CRANE, P&H 10 T. X 70' SPAN, top riding

bridge, top riding hoist, DC, cab operated, S/N 12667 (Unit 84)

(Located in Bldg. 20-D) (Sold by photo)

370 1 OVERHEAD BRIDGE CRANE, P&H 5 T. X 47'-2" SPAN, pendant,

DC, S/N 14924 (Unit 52) (Located in Bldg. 17-C) (Sold by photo)

370A 1 OVERHEAD BRIDGE CRANE, P&H 5 T. X 47'-2" SPAN, pendant,

DC, S/N 71E77M (Unit 56) (Located in Bldg. 17-C) (Sold by photo)

370B 1 FORKLIFT, TAYLOR 30,000 LB. CAP., Mdl. THD300M, new 2001,

Cummins diesel engine, 152" mast ht., 13' lift ht., pwr. shift trans.,

1200x20 tires, 90" forks, 4,975 H.O.M., S/N 29640

371 1 FORKLIFT, TAYLOR 25,000 LB. CAP., Mdl. TE250M, new 1988,

diesel engine, 162” standard mast, 180” lift ht., 94” forks, pneu. tires,

side shifter, S/N S-H5-19486

372 1 FORKLIFT, HYSTER 21,000 LB. CAP., Mdl. H210XL, new 1997, LPG

engine, 138” standard mast, 147” lift ht., 72” forks, pneu. tires, side

shift, S/N E007D02952U

373 1 FORKLIFT, YALE 15,500 LB. CAP., Mdl. GDP155CANPBE087, new

1999, diesel engine, 87” triple stage mast, 144” lift ht., 72” forks, pneu.

tires, side shift, S/N A878D01731W

374 1 FORKLIFT, YALE 12,000 LB. CAP., Mdl. GLP120MJNGAE087, new

2003, LPG engine, 87” triple stage mast, 177” lift ht., 48” forks, pneu.

tires, 5,982 H.O.M., S/N C813V02712A

375 1 FORKLIFT, YALE 10,000 LB. CAP., Mdl. GDP100MJNPBE099, new

2006, diesel engine, 99” triple mast, 196” lift, 48” forks, solid pneu. tires,

side shift, S/N E813V04185D

375A 1 FORKLIFT, KOMATSU 10,000 LB. CAP., Mdl. FD50-AT2-8CX20, new

2006, diesel engine, 3-stage mast, 12' lift ht., pwr. shift trans., new air

tires, 48" forks, 2,790 H.O.M., S/N 586229A


LOT QTY DESCRIPTION

376 1 FORKLIFT, YALE 8,000 LB. CAP., Mdl. GDP080VXNCGE090, new

2008, diesel engine, 90” triple mast, 194” lift ht., 42” forks, solid pneu.

tires, 7,989 H.O.M., S/N F813V02885F

377 1 FORKLIFT, YALE 6,000 LB. CAP., Mdl. GDP060VXEXSE087, new

2006, diesel engine, 87” triple mast, 181” lift ht., 42” forks, solid pneu.

tires, side shift, 633 H.O.M., S/N B875B04284D

377A 1 FORKLIFT, CATERPILLAR 6,000 LB. CAP., Mdl. ZPD600, new 2010,

diesel engine, 80" 3-stage mast, 12' lift ht., pwr. shift trans., solid pneu.

style tires, 60" forks, 3,096 H.O.M., S/N AT14E31060

377B 1 FORKLIFT, KOMATSU 6,000 LB. CAP., Mdl. FD30T-14-8X20, new

2006, diesel engine, 80" 3-stage mast, 12' lift ht., pwr. shift trans., new

air tires 20x9-15, 48" forks, 2,892 H.O.M., S/N 586229A

378 1 FORKLIFT, TAILIFT 5,060 LB. CAP., Mdl. FD35, diesel engine, 5,060

lb. @ 24" L.C., 192" max. lift, hyd. fork positioning, S/N TA08720

378A 1 FORKLIFT, YALE 5,000 LB. CAP., Mdl. GDP050RGEUAE086, new

2005, diesel engine, 90" mast ht., 188" lift ht., side shift, solid pneu.

Style tires, 42" forks, 5,423 H.O.M., S/N A875B23335A

378B 1 WHEEL LOADER, CATERPILLAR MDL. 924G, new 2004, Cat diesel

engine, smooth bucket, new tires, new paint, 8,541 H.O.M., S/N

CAT924GEDDA01248

379 1 HYDRAULIC ROUGH TERRAIN CRANE, BRODERSON MDL. 6BT

5.9, diesel engine, enclosed cab, hyd. outriggers, 4-section hyd. boom,

swing-away jib, S/N 44621099

380 1 BOOM LIFT, GENIE MDL. Z6034, block heater, S/N 1676

381 1 ELECTRIC SCISSOR LIFT, UPRIGHT MDL. 26N, self-propelled,

approx. 500 lb. platform cap., 26' max. lift

382 1 TRACTOR, MASSEY/FERGUSON MDL. 255, Bush Hog Mdl. 2426QT

diesel engine, front end loader attachment, rear grating blade, 3 pt.

hyd. hitch, rear pwr. take off.

383 1 TRAIN RAIL CAR, 40' x 10' x 10'

384 1 ELECTRIC GOLF CART, EZ-GO, battery charger, S/N 2177051

385 1 ELECTRIC GOLF CART, EZ-GO, battery charger, S/N1575818



388 1 ROTARY SCREW AIR COMPRESSOR, CURTIS MDL. RS200A-

EE75G2.094 RS SERIES, new 2008, 200 HP motor, 860 CFM, air

cooled, skid mtd., S/N 09M09001

389 1 ROTARY SCREW AIR COMPRESSOR, QUINCY MDL.

QSI1000ANA31C, new 1996, air cooled, skid mtd., 200 HP motor, S/N

99740

390 1 AIR RECEIVER TANK, approx. 42" dia. x 20'L., w/heavy fabricated

steel stand

391 1 WELDING MANIPULATOR, RANSOME 12 X 12 (needs work)

392 1 WELDING MANIPULATOR, RANSOME 12 X 12 (needs work)

393 1 LOT OF WELDING MANIPULATORS (2) (for parts use)

394 2 MANLIFT TOWERS, 15', w/forklift pockets

395 1 LOT CONSISTING OF H.D. WELDING TABLES (2) & CUTTING

TABLES (2)

396 1 LOT OF RECEIVER TANKS: oxygen & natural gas, 200 gal. cap.


LOT QTY DESCRIPTION

397 1 DUMP HOPPER

398 1 DUMP HOPPER

399 1 DUMP HOPPER

400 1 DUMP HOPPER

401 1 DUMP HOPPER

402 1 DUMP HOPPER

403 1 DUMP HOPPER

404 1 DUMP HOPPER405 1 DUMP HOPPER

406 4 DUMP HOPPERS

407 4 DUMP HOPPERS

408 4 DUMP HOPPERS

409 4 DUMP HOPPERS

410 1 LOT OF WORKHORSES, H.D.

411 1 LOT OF FABRICATED STANDS, H.D.



414 1 LOT OF FLUX HOPPERS (approx. 6)

415 1 LOT OF PORTABLE STAIRS

416 1 LOT OF FABRICATED SET-UP TABLES, H.D.

417 1 GOOSENECK TRAILER, CUSTOM, 30' overall length, tandem axle,

diamond plate steel bed, stake pockets, landing gear, VIN BW2018

418 1 TRAILER, 45' x 8', wood deck (needs repair) (no title - yard use only)

419 1 LOT OF FORKLIFT FORKS SETS (2), 8'L.

420 1 LOT CONSISTING OF SCRAP, LADDERS, STAND & RAILS

421 1 LOT CONSISTING OF MISC. TURNING ROLLS, GEARS,

ELECTRICAL BOXES, METAL TUBS

422 1 OIL RESERVOIR, 400 gal. cap., w/drip pan

423 1 LOT OF BARREL RACKS (on fabricated stand)

424 1 PORTABLE SHED, 30' x 8' x 8', w/electrical supplies, conduit fittings,

wire, fuses

425 1 VERTICAL MILLING MACHINE, HARTFORD

426 1 MULTI-PURPOSE MACHINE, AE HQ-400

427 1 LOT CONSISTING OF CONTENTS OF MAINTENANCE ROOM: tools,

grinders, shelves, electrical parts, etc.

429 1 DIESEL TANK, w/dispenser

430 1 LOT OF GALLON DRUMS, 55 gal. (approx. 13)

431 1 LOT OF HEATERS, CUSTOM (approx. 24)

432 1 SHIPPING CONTAINER, 40'


434 1 PORTABLE BUILDING (converted into restroom), (2) sections, (2)

stalls, sinks, A/C

435 1 PORTABLE WATER DISBURSEMENT SYSTEM

436 1 WELDING TABLE, 7' x 5', 1" thk. top, H.D.

437 1 LOT OF ALL-THREAD ROD, up to 1-3/4" dia., in 12' lengths, on A-

frame steel rack

438 1 ABRASIVE CUT-OFF SAW, STONE 20", w/heavy fabricated stand &

infeed conveyor, 10 HP drive motor

439 1 DOUBLE END PEDESTAL GRINDER


LOT QTY DESCRIPTION

440 1 LOT OF H.D. STORAGE LOCKERS & H.D. METAL SHELF

441 1 WOODCUTTING VERTICAL BANDSAW, DELTA 12", on fabricated

stand

442 1 PEDESTAL DRILL PRESS, DELTA 16" SHOPMASTER

443 1 PIDGEON HOLE SHELF, H.D., w/nuts, bolts, washers

444 1 LOT OF WELDING LOCKERS (2), H.D.

445 1 PLATE BENDING ROLL, CUSTOM, 65-1/2" roll length, approx. 5" roll

dia., heavy gear drive, manual adj.

446 1 PLATE BEVELLER, GULLCO MDL. KBM-18-100-D, new 2011,

fabricated steel table, S/N 31644-2

446A 1 PORTABLE PLATE EDGE BEVELER, GULLCO

447 1 WELDING TABLE, 6' x 4' x 3, 2" thk. top, H.D.

448 1 HYDRAULIC IRONWORKER, PIRANHA MDL. P120, 120 T. punch

cap., 1-1/2" dia. thru 1" material, ½" x 20" flatbar shear cap., 6" x 6" x

5/8" angle cutting cap., 2" rd. bar shear cap., 4" x 6" x 3/8"

coper/notcher, pressbrake attach., punch head & stripper, elec. foot

pedal, S/N 1096

449 1 BELT SANDER, BURR KING 4", 3 HP drive, pedestal mtd., S/N

W1203282551

450 1 VERTICAL/HORIZONTAL ANGLE BENDING ROLL, PULLMAX MDL.

Z-41, 5" X 5" X ½" CAP., 4” X 4” X ½” leg-in cap., (2) adj. ht. back-up

rollers, standard angle roll set, portable operator’s pendant, 16' dp. x

17'W. heavy steel plate worktable, elevated bar-grate surround, S/N

N.A.

451 1 LOT OF H.D. FABRICATED TABLES & LOCK BOXES (2)

452 1 LOT OF FABRICATED LOCK BOXES (2), H.D.

453 1 CIRCULAR BURNING MACHINE, CUSTOM, cantilever design,

vert./horiz. adjustment, approx. 84" max. part size, rolling table, oxy.

fuel cutting head

454 1 DOUBLE END GRINDER, DAYTON

456 1 LOT OF PALLET LIFTERS, CUSTOM

457 1 LOT OF TRACK TORCHES, VICTOR MDL. VCM200, w/assortment of

track, oxy. fuel cutting head, variable spd. motion





460 1 WELDING TABLE, 8' x 7' x 3', 2" thk. top, H.D.

461 1 PEDESTAL DRILL PRESS, POWERMATIC, S/N 315S858

462 1 WELDING TABLE, 10' x 7' x 3', 2" thk. top, H.D.

463 1 CIRCULAR BURNING MACHINE, CUSTOM, 60" dia. rotary table, 3' x

4' car mtd. manipulator, oxy. fuel cutting head, approx. 120" max. dist.

cutting head to table center, fabricated operator’s platform & controls

464 1 HYDRAULIC UP-ACTING DISHING & FLANGING PRESS, CUSTOM

APPROX. 500 T. CAP., 16" dia. up-acting hyd. cylinder, dual hyd. pull

backs, 21" F-B x 52" R-L bed area, 16" sq. ram area, 20 HP unitized

hyd. system, large assortment of bending dies including dishing dies,

flattening dies, pressbrake attachs. & assorted other units

465 1 FOREMAN'S DESK, H.D.


LOT QTY DESCRIPTION

466 1 LOT OF ROTATING FIXTURES

467 1 LOT OF HELPER STANDS

467A 1 STORAGE LOCK BOX, H.D.

468 1 OVERHEAD BRIDGE CRANE, LANDEL 5 T. X APPROX. 24' SPAN,

top running, underhung, AC pwrd., pendant control, center drive, P&H

wire rope hoist, S/N A2392

469 1 OVERHEAD BRIDGE CRANE, CUSTOM 5 T. X APPROX. 24' SPAN,

top running, underhung, sgl. girder, AC pwrd., center drive, P&H wire

rope hoist

470 1 PORTABLE OFFICE BUILDING, 12' x 12', entry door, (2) windows,

A/C, assorted furnishings

471 1 PORTABLE OFFICE BUILDING, 20' x 10', entry door, (2) windows,

A/C, divided into (2) offices, assorted office furnishings, wood panelling

472 1 PORTABLE OFFICE BUILDING, 16' x 8', entry door, (2) windows, A/C,

assorted furnishings

473 1 LOCKER, 5' x 7' x 2', w/(2) TXC-21 time clocks

474 1 LOT OF ELECTRICAL WIRE (in one tub)

475 1 LOT OF STORAGE LOCKERS, H.D.

476 1 LOT OF HOSE: air & oxy./acy. (on two pallets)

477 1 LOT OF EXTENSION CORDS (in one tub)

478 1 LOCKER, H.D.

479 1 LOT OF AIR HOSE (in one metal tub)

480 1 LOT OF ARC GOUGING LEADS (in one metal tub)

481 1 LOT OF EXTENSION CORDS (in one tub)

482 1 LOT OF DROP LIGHTS (in one metal tub)

483 1 LOT OF OYX./ACY. HOSE (in one metal tub)



486 1 LOT OF OYX./ACY. HOSE (on three pallets)

486A 1 LIFTING BASKET, 4' x 4' x 4'

486B 1 JIB CRANE, 10 TON CAP., P&H 10 ton cap. hoist

487 1 DOUBLE END GRINDER

488 1 DRILL PRESS, BUFFALO, 5-spd., H.D.

489 1 WELDING TABLE, 8' x 3' x 2', 1" thk. top, w/vise

490 1 LOT CONSISTING OF REMAINDER OF TOOL CRIB: lockers, tables,

cantilever rack, misc. tools

491 1 METAL RACK, H.D., w/misc. nuts

492 1 PIPE PANTOGRAPH, VERNON PANTOGRAPH MDL. G, variable

spdl. travel carriage, 25'L. lift/rotate table, oxy. fuel cutting head, S/N

1190

493 1 LOT OF STEEL PIPE up to 1" wall thickness, various lengths up to 16',

diameters from 1-1/2" to 12-1/2", in rack

494 1 HORIZONTAL BANDSAW, AMADA MDL. H450HD, 1-1/2" blade, hyd.

clamping, 15' manual infeed conveyor unit, miter capability, S/N

460089495 1 LOT OF FLANGE DRILL TEMPLATES (guides), up to 46" dia.,

hardened drill bushings

496 1 RADIAL ARM DRILL, CARLTON 6' X 19", spds. to 1,200 RPM, pwr.

head traverse, pwr. elevation & clamping, No. 5 MT spdl., custom 70" x

60" riser table, S/N 4A3738


LOT QTY DESCRIPTION

497 1 SADDLE TYPE TURRET LATHE, WARNER & SWASEY MDL. 4A,

Series M-3550, 9-1/4" spdl. hole, 75 HP motor, crossliding turret, 24"

dia. 4-jaw thru hole chuck, turret slide taper attach., assorted turret

tooling, full length leadscrew, S/N 2611948

497A 1 LOT OF DRILL BITS, DRILL SLEEVES, END MILLS, INSERTS (large

qty.) (in one locker box)

498 1 VERTICAL BORING MILL, KING 42", 48" sw. to side head, R.H. 5

pos. turret, L.H. swivel boring ram & side head, pendant control, spds.

to 200 RPM, built-in 4-jaw chuck, 30 HP drive motor, S/N M-42-619,

Lot No. 420021-3

499 PIPE THREADER, RIDGID MDL. 535, cut-off & reamer, fabricated

steel base, (2) thdng. heads, S/N 361380

500 1 RADIAL ARM DRILL, OOYA 5' X 13", Mdl. RE2-1450, spds. to 1,985

RPM, No. 4 MT spdl., 59-1/2" x 43-1/2" fabricated steel riser table, S/N

N78H-4777

501 1 WELDING TABLE, 6' x 4' x 3', 4" thk. table top, H.D.

502 1 ENGINE LATHE, LODGE & SHIPLEY 18" X 84", Mdl. X, 21" actual

sw. over bed, taper attach., spds. to 500 RPM, quick change toolpost,

16" dia. 4-jaw chuck, S/N 34509

503 1 ENGINE LATHE, CAZENEUVE 21" X 60", spds. to 2,000 RPM, 2-1/4"

spdl. hole, inch/metric thdng., 14" dia. 4-jaw chuck, S/N 40329-K8

504 1 DRILL GRINDER, OLIVER MDL. 600, ½" to 3" cap., S/N G7510

505 1 CAM & PIVOT NOZZLE BURNING MACHINE, CUSTOM, 76" max.

dia., adj. ht. frame w/approx. 42" max. ht., swivel oxy. fuel cutting head,

arm raising mechanism, variable spd. control

506 1 PORTABLE OFFICE BUILDING, 12' x 10', sgl. entry door, sgl. window

A/C

507 1 LOT OF GASKETS, assorted

508 1 VERTICAL TURRET MILL, BRIDGEPORT SERIES 1, 9" x 42" table, 2

HP variable spd. head, chrome ways, long. pwr. feed, S/N 209859

509 1 DOUBLE END GRINDER, GRAND RAPIDS, H.D.

510 1 WELDING TABLE, 4' x 4' x 3', 4" thk. table top, H.D., w/vise

511 1 LOT OF STEEL FABRICATED STANDS, H.D., of various sizes &

capacities

512 1 LOT OF STORAGE LOCKERS, H.D. (approx. 7)

513 1 LOT OF STORAGE LOCKERS, H.D. (approx. 3)

514 1 ELECTRIC MOTOR, MARATHON, 200 HP

515 1 ELECTRIC MOTOR, SIEMENS, 200 HP

516 1 PUMP, WORTHINGTON, H.D.

517 1 MOTOR, GENERAL ELECTRIC, 100 HP, direct current

518 1 MOTOR, GENERAL ELECTRIC, 100 HP, direct current

519 1 ELECTRIC MOTOR, ECONOGEAR


521 1 LOT OF WELDING BARRICADES & HELPER STANDS

521A 1 OVERHEAD BRIDGE CRANE, SHAWBOX 10 T. X APPROX. 32'

SPAN, Shaw-Box unitized wire rope hoist, top running, sgl. girder, AC

pwrd., pendant control, dbl. end drive, variable spd. 6-way pwr. motion


LOT QTY DESCRIPTION

521B 1 OVERHEAD BRIDGE CRANE, HALBERT CRANE & HOIST 5 T. X

APPROX. 32' SPAN, top running, sgl. girder, underhung, AC pwrd.,

pendant control, dbl. end drive, Coffing unitized under hung hoist, S/N

1402M

522 1 LOT OF EMPLOYEE LOCKERS, FILE CABINET & DESK

523 1 HYDROSTATIC GAUGE TEST BENCH, CUSTOM, assorted gauging

& valves for testing hydrostatic cylinders

524 1 LOT OF GASKET MATERIAL (on A-frame stand)

525 1 H-FRAME PRESS, CUSTOM 5 T. CAP.

526 1 LOT OF WELDING ELECTRODE RODS (on one metal shelf)

527 1 LOT OF WELDING ELECTRODE RODS & FLUX CORE WIRE (on

one metal shelf)

528 1 LOT OF MIG WELDING WIRE (on one metal shelf)

529 1 LOT OF MIG WELDING WIRE & USED WELDING SPOOLS (on one

metal shelf)

530 1 ELECTRIC FURNACE, CRESS MDL. C162012/F4, 16"W. x 20" dp. x

12" ht. interior dims., 480 v., Watlow digital controls, Honeywell chart

recorder, S/N 0808

531 1 ELECTRIC OVEN, HENKEL MDL. KHT-500, 240 v.


533 1 LOT OF WELDING ELECTRODES (on one metal shelf)

534 1 STORAGE LOCKER

535 1 LOT OF WELDING COUPONS (on one metal shelf)

536 1 LOT OF PENETRANT, MET-L-CHECK (in aerosol cans)

537 1 LOT OF WELDING WIRE & FLUX (on one pallet)

538 1 LOT OF WELDING WIRE (on one pallet)

539 1 LOT OF WELDING WIRE (in one barrel)

540 1 LOT OF FLUX (on one pallet)

541 1 LOT OF GOUGING CARBON RODS (on one pallet)

542 1 LOT OF FLUX (on one pallet)

543 1 LOT OF WELDING ELECTRODES (on one pallet)




548 1 LOT OF WELDING WIRE (on one pallet)

549 1 LOT OF WELDING WIRE (in two barrels on one pallet)

549A 1 REFRIGERATED AIR DRYER, DELTECH MDL. P425A, R22, S/N

98FPA2468

550 1 SIDE BEAM WELDER, CUSTOM, 10' carriage travel, Lincoln wire feed

head, Lincoln NA-3N sub-arc weld control, Lincoln flux box, fabricated

steel welding fixture

551 1 LOT CONSISTING OF CONTENTS OF SHIPPING CONTAINER:

bathroom supplies, cups, metal shelving, Sentry safe (container not

included)


553 1 LIQUID OXYGEN TANK, CUSTOM, 7,500 gal. cap., multiple valves,

245 PSIG, max. allowable working pressure, +100 deg F. to -320 F.,

.659" shell thickness, .328" head thickness, 51" head radius, on

fabricated steel stand, Tank ID No. 56517C


LOT QTY DESCRIPTION

554 1 CAR BOTTOM FURNACE, GENERAL WELDING/CUSTOM BUILT,

28'-3"W. x 24'-3" ht. x 89'-6"L. interior dims., (9) burner openings per

side, ceramic wool lining, heavy cap. rail car base

555 1 DIESEL TANK, 400 gal. cap.

556 1 DIESEL TANK, 400 gal. cap.

557 1 PORTABLE LIGHT TOWER, AMIDA LIGHTING SYSTEMS, Kubota

D850 diesel engine, tilt-up light tower w/(4) high output lights, sgl. axle

558 1 PORTABLE LIGHT TOWER, AMIDA LIGHTING SYSTEMS, Kubota

D850 diesel engine, tilt-up light tower w/(4) high output lights, sgl. axle

559 3 COUNTERWEIGHTS, H.D.

560 1 LOT OF FABRICATED SET-UP TABLES

561 1 STEEL ROLL, w/assorted gears

562 1 LOT OF FABRICATED BEAMS, 20'L.

563 1 SHOTBLAST TOWER, CONE BOTTOM, approx. 120" dia. x 20' ht.,

(2) approx. 30" dia. x 48" ht. shotblast pots, assorted air hoses & blast

hoses

564 1 LOT OF TRANSPORT DOLLIES, extra H.D., including 16-wheel

rubber tired dollies w/heavy steel plates

565 1 LOT OF TRANSPORT DOLLIES, extra H.D., including 16-wheel

rubber tired dollies w/heavy steel plates

566 1 TRANSPORT DOLLY, 32-wheel, rubber tired, extra H.D., w/heavy

steel plate

567 1 TRANSPORT DOLLY, 16-wheel, rubber tired, extra H.D., w/heavy

steel plate

568 1 LOT OF TRANSPORT DOLLIES, 12-wheel, rubber tired, extra H.D.,

w/heavy steel plates













575 LOT OF TRANSPORT DOLLIES, 2-wheel, rubber tired, extra H.D.,






578 1 DUMP HOPPER

579 1 DUMP HOPPER

580 1 SANDBLAST POT

581 1 PAINT BOOTH, 30' x 15'


LOT QTY DESCRIPTION

582 1 ROTARY SCREW AIR COMPRESSOR, SULLAIR MDL. 12B-

60HACAC, skid mtd., air cooled, weather enclosure, 60 HP, S/N 003-

65373

583 1 AIR RECEIVER TANK, approx. 42" dia. x 20'L.

584 1 LOT OF STORAGE SHEDS (2): 20' & 10'

585 1 PICKUP TRUCK, FORD F-250 SUPER DUTY, gasoline engine,

extended cab, Odo: 136,439 miles, VIN 1FTNX20LX1ED52191

586 1 PORTABLE OFFICE BUILDING, 11' x 19', multiple windows & doors

587 1 SECURITY CAMERA, (16) cameras

588 1 PORTABLE OFFICE BUILDING, 39' x 13', multiple windows, entry

door, assorted office furniture

589 1 PORTABLE OFFICE BUILDING, 11' x 19', entry door, windows,

assorted furnishings

590 1 PORTABLE OFFICE BUILDING, 39' x 13', multiple windows, entry

door, assorted office furniture

591 1 LOT OF ALUMINUM FLAGPOLES, approx. 25’ ht.

592 1 LOT OF ALUMINUM FLAGPOLES, approx. 25’ ht.

GENERAL WELDING WORKS, INC. - vihn.netpmi.vihn.net/auction/Files/4_1000000264_General Welding...

Documents

Transcript of GENERAL WELDING WORKS, INC. - vihn.netpmi.vihn.net/auction/Files/4_1000000264_General Welding...