General Shop Equipment - Snap-onsbsprograms.snapon.com/Forms/Toyota/Ty_Sec8_GeneralShop.pdf ·...

Section 8 General Shop Equipment & Supplies

Air Compressors / Dryers•

Air Tools•

Bench Grinders/Vises & Stands•

Eyewash Stations•

Face Shield•

Floor Mats•

Grease Gun•

Headlamp Aimers•

Interchangeable Puller Set•

Key Code Cutters•

Key Drop-Off Security Systems•

Key Management•

Oil Filter Crusher & Stands•

Paint Gun Washer•

Sandblasters•

Seat Creepers•

ServiceIdentifiers•

Shop Presses & Accessories•

Solvent Recyclers•

Valve Seat Cutter•

Vehicle Protection•

Work Lights•

Work Order Rack•

Section 8: This section features a selection of General

Shop Equipment and Supplies available through the Toyota Approved Dealer Equipment program. All product has been reviewed and approved by Toyota Motor Sales, USA.

Suppliers:Alemite Corp.•American Aimers•Barnes Distribution•BJ Enterprises•Central Tools•Champion, A Gardner Denver Product•Cliplight Manufacturing Company•Dell Corning Corporation•Hassel Material Handling Co.•Herkules Equipment•Hutchins Mfg.•Ingersoll-Rand•JS Products•Kaba Ilco.•KEYper Systems•Lyon Workspace Products•Neway Manufacturing•Norco Industries, Inc.•OTC / A Division of SPX•Secure Industries / Keykeeper•Snap-on Tools•Spectrum Composites, Inc.•Uni-Ram•Vacula Automotive Products•WMH Tool Group•Wright Tool / Haws Industries•

For additional product information or to contact a program representative

CALL: 1-800-368-6787

8

General Shop Equipment & SuppliesSection 8

FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 8-1

8-1

EQS does not warrant the accuracy of this content and has no liability for any errors or omissions. Content is subject to change without notice.

Base Mount• CHARC5BC - 5 hp, 208 volts, 3 phase.• CHARC5BD - 5 hp, 230 volts, 3 phase. • CHARC5BE - 5 hp, 460 volts, 3 phase.• CHARC75BC - 7.5 hp, 208 volts, 3 phase. • CHARC75BD - 7.5 hp, 230 volts, 3 phase. • CHARC75BE - 7.5 hp, 460 volts, 3 phase.

Horizontal Tank Mount*• CHARC58C - 5 hp, 80 gallon. 208 volts, 3 phase. • CHARC58D - 5 hp, 80 gallon. 230 volts, 3 phase. • CHARC58E - 5 hp, 80 gallon. 460 volts, 3 phase. • CHARC758C - 7.5 hp, 80 gallon. 208 volts, 3 phase. • CHARC758D - 7.5 hp, 80 gallon. 230 volts, 3 phase.• CHARC108C - 10 hp, 80 gallon. 208 volts, 3 phase. • CHARC108D - 10 hp, 80 gallon. 230 volts, 3 phase. • CHARC108E - 10 hp, 80 gallon. 460 volts, 3 phase.• CHARC1512C - 15 hp, 120 gallon. 208 volts, 3 phase. • CHARC1512D - 15 hp, 120 gallon. 230 volts, 3 phase. • CHARC1512E - 15 hp, 120 gallon. 460 volts, 3 phase.

Models

Features the latest in technology, innovation and engineering at an economical price. Low dBA level, small footprint, high efficiency and easy serviceability are standard benefits.

Rotary Screw Compressors

• Complete rotary screw compressor assembly. • Mounted inlet air filter. • Full flow spin-on type oil filter. • Spin-on type air/oil separator. • NEMA 1 start/stop pressure switch control. • Vibro isolators. • ODP, EPAct efficient, 60 HZ drive motor.

Features

Air CompreSSorS SuPPLiED By: CHAMPiON, A GARDNER DENVER PRODuCT

Vertical Tank Mount*• CHARCS25BC - 25 hp, 120 gallon. 208 volts, 3 phase. • CHARCS25BD - 25 hp, 120 gallon. 230 volts, 3 phase. • CHARCS25BE - 25 hp, 120 gallon. 460 volts, 3 phase. • CHARCS30BC - 30 hp, 120 gallon. 208 volts, 3 phase. • CHARCS30BD - 30 hp, 120 gallon. 230 volts, 3 phase. • CHARCS30BE - 30 hp, 120 gallon. 460 volts, 3 phase. • CHARCS40BC - 40 hp, 120 gallon. 208 volts, 3 phase. • CHARCS40BD - 40 hp, 120 gallon. 230 volts, 3 phase. • CHARCS40BE - 40 hp, 120 gallon. 460 volts, 3 phase. • CHARCS50BC - 50 hp, 120 gallon. 208 volts, 3 phase. • CHARCS50BD - 50 hp, 120 gallon. 230 volts, 3 phase. • CHARCS50BE - 50 hp, 120 gallon. 460 volts, 3 phase.

General Shop equipment & SuppliesThis is an introduction to General Shop Equipment & Supplies. Within this section you will find Air Compressors & Dryers, Air Tools, Sandblasters, Bench Grinders, Key Code Cutters and a variety of other products. Some things to consider when shopping for this type of equipment would be:

When buying a compressor, whether rotary or reciprocating, get the largest tank possible. Compressors • are most efficient when they are not running, so the more capacity the tank has, the less the compressor needs to run saving electrical costs.Rotary screw compressors are considerably quieter than the typical reciprocating compressor particularly • when a compressor room is not available.Protect air-powered tools, air plumbing, etc., with a refrigerated air dryer. it also reduces moisture splatter • on customers’ vehicles from air-powered tools.This section includes Toyota interior Protection Program components.•

When considering a purchase of any capitol equipment, please contact your Regional Manager at 1-800-368-6787 for assistance in configuring the proper set-up for your environment.

* Tank mounted models include mounted pressure gauge, ASME relief valve, in-tank check valve, discharge hand valve and manual tank drain.

Section 8General Shop Equipment & Supplies

FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-96518-2

8-2


5 hp 80 Gallon Advantage* Configuration• CHAVR58B - 5 hp, 80 gallon vertical tank. 230 volts, 1 phase. • CHAVR58D - 5 hp, 80 gallon vertical tank. 230 volts, 3 phase. • CHAHR58B - 5 hp, 80 gallon horizontal tank. 230 volts, 1 phase.• CHAHR58D - 5 hp, 80 gallon horizontal tank. 230 volts, 3 phase.

5 hp 80 Gallon Package Configuration• CHAVR58C - 5 hp, 80 gallon vertical tank. 208 volts, 3 phase. • CHAHR58C - 5 hp, 80 gallon horizontal tank. 208 volts, 1 phase.

7.5 hp 80 Gallon Advantage* Configuration• CHAVR7F8B - 7.5 hp, 80 gallon vertical tank. 230 volts, 1 phase. • CHAVR7F8C - 7.5 hp, 80 gallon vertical tank. 208 volts, 3 phase. • CHAVR7F8D - 7.5 hp, 80 gallon vertical tank. 230 volts, 3 phase. • CHAHR7F8A - 7.5 hp, 80 gallon horizontal tank. 208 volts, 1 phase. • CHAHR7F8B - 7.5 hp, 80 gallon horizontal tank. 230 volts, 1 phase. • CHAHR7F8C - 7.5 hp, 80 gallon horizontal tank. 208 volts, 3 phase. • CHAHR7F8D - 7.5 hp, 80 gallon horizontal tank. 230 volts, 3 phase. • CHAHR7F8E - 7.5 hp, 80 gallon horizontal tank. 460 volts, 3 phase.

7.5 hp 80 Gallon Package Configuration• CHAVR78A - 7.5 hp, 80 gallon vertical tank. 208 volts, 1 phase. • CHAVR78B - 7.5 hp, 80 gallon vertical tank. 230 volts, 1 phase. • CHAVR78C - 7.5 hp, 80 gallon vertical tank. 208 volts, 3 phase. • CHAVR78D - 7.5 hp, 80 gallon vertical tank. 230 volts, 3 phase. • CHAVR78E - 7.5 hp, 80 gallon vertical tank. 460 volts, 3 phase. • CHAHR78A - 7.5 hp, 80 gallon horizontal tank. 208 volts, 1 phase. • CHAHR78B - 7.5 hp, 80 gallon horizontal tank. 230 volts, 1 phase. • CHAHR78C - 7.5 hp, 80 gallon horizontal tank. 208 volts, 3 phase. • CHAHR78D - 7.5 hp, 80 gallon horizontal tank. 230 volts, 3 phase. • CHAHR78E - 7.5 hp, 80 gallon horizontal tank. 460 volts, 3 phase.

10 hp 120 Gallon Advantage* Configuration• CHAHR1012C - 10 hp, 120 gallon horizontal tank. 208 volts, 3 phase. • CHAHR1012D - 10 hp, 120 gallon horizontal tank. 230 volts, 3 phase. • CHAHR1012C - 10 hp, 120 gallon vertical tank. 208 volts, 3 phase. • CHAHR1012D - 10 hp, 120 gallon vertical tank. 230 volts, 3 phase.

15 hp 120 Gallon Advantage* Configuration• CHAHRA1512C - 15 hp, 120 gallon horizontal tank. 208 volts, 3 phase. • CHAHRA1512D - 15 hp, 120 gallon horizontal tank. 230 volts, 3 phase.

Models

A wide selection of configurations and available options, coupled with serviceability features make it easy to operate and maintain a Champion compressor. Champion offers Fully Packaged/Advantage configurations of reciprocating compressors. Advantage models are configured the same as Fully Packaged configurations but are available for 24 hour delivery.

Simplex Two Stage Reciprocating Compressed Air Systems

VerticalHorizontal

• Totally enclosed belt guard. • Two stage splash lubricated compressor pumps. • Mounted on ASME coded air receiver with a pressure relief and service drain valve, pressure gauge and vibration isolators. • 1800 r.p.m. NEMA rated electric motor. • Centrifugal unloader for loadless starts. • Automatic start/stop controls, Dual Control (15 hp and above). • Low oil level protection. • Magnetic starter in NEMA rated enclosure. • Automatic tank drain.

Features


15 hp 120 Gallon Package Configuration• CHAHR15F12C - 15 hp, 120 gallon horizontal tank. 208 volts, 3 phase. • CHAHR15F12D - 15 hp, 120 gallon horizontal tank. 230 volts, 3 phase. • CHAHR15F12E - 15 hp, 120 gallon horizontal tank. 460 volts, 3 phase.

15 hp 240 Gallon Package Configuration• CHAHRA1524C - 15 hp, 240 gallon horizontal tank. 208 volts, 3 phase. • CHAHRA1524D - 15 hp, 240 gallon horizontal tank. 230 volts, 3 phase. • CHAHRA1524E - 15 hp, 240 gallon horizontal tank. 460 volts, 3 phase. • CHAHR15F24C - 15 hp, 240 gallon horizontal tank. 208 volts, 3 phase. • CHAHR15F24D - 15 hp, 240 gallon horizontal tank. 230 volts, 3 phase. • CHAHR15F24E - 15 hp, 240 gallon horizontal tank. 460 volts, 3 phase.

20 hp 120 Gallon Package Configuration• CHAHRA2012C - 20 hp, 120 gallon horizontal tank. 208 volts, 3 phase. • CHAHRA2012D - 20 hp, 120 gallon horizontal tank. 230 volts, 3 phase. • CHAHRA2012E - 20 hp, 120 gallon horizontal tank. 460 volts, 3 phase.


25 hp 120 Gallon Advantage* Configuration• CHAHRA2512C - 25 hp, 120 gallon horizontal tank. 208 volts, 3 phase. • CHAHRA2512D - 25 hp, 120 gallon horizontal tank. 230 volts, 3 phase.



30 hp 240 Gallon Package Configuration• CHAHRA3024C - 30 hp, 240 gallon horizontal tank. 208 volts, 3 phase. • CHAHRA3024D - 30 hp, 240 gallon horizontal tank. 230 volts, 3 phase. • CHAHRA3024E - 30 hp, 240 gallon horizontal tank 460 volts, 3 phase.

*Advantage models are configured the same as Fully Packaged configurations and are available for 24 hour delivery.



8-3


5 hp 120 Gallon Advantage* Configuration• CHAHR5D12B - 5 hp, 120 gallon horizontal tank. 230 volts, 1 phase.

5 hp 120 Gallon Package Configuration• CHAHR5D12A - 5 hp, 120 gallon horizontal tank. 208 volts, 1 phase. • CHAHR5D12C - 5 hp, 120 gallon horizontal tank. 208 volts, 3 phase. • CHAHR5D12D - 5 hp, 120 gallon horizontal tank. 230 volts, 3 phase.

7.5 hp 120 Gallon Package Configuration• CHAHR7D12A - 7.5 hp, 120 gallon horizontal tank. 208 volts, 1 phase. • CHAHR7D12B - 7.5 hp, 120 gallon horizontal tank. 230 volts, 1 phase. • CHAHR7D12C - 7.5 hp, 120 gallon horizontal tank. 208 volts, 3 phase. • CHAHR7D12D - 7.5 hp, 120 gallon horizontal tank. 230 volts, 3 phase.

7.5 hp 240 Gallon Package Configuration• CHAHR7D24E - 7.5 hp, 240 gallon horizontal tank. 460 volts, 3 phase.

10 hp 120 Gallon Package Configuration• CHAHR10D12C - 10 hp, 120 gallon horizontal tank. 208 volts, 3 phase. • CHAHR10D12D - 10 hp, 120 gallon horizontal tank. 230 volts, 3 phase. • CHAHR10D12E - 10 hp, 120 gallon horizontal tank. 460 volts, 3 phase.

10 hp 240 Gallon Advantage* Configuration• CHAHR10D24D - 10 hp, 240 gallon horizontal tank. 230 volts, 3 phase.

Models

Champion Duplex Air Compressors were designed to deliver extra air when you need it without wasted space. you also have the flexibility of single operation, alternating between compressors, or duplex operation to meet high air demands. Champion offers Fully Packaged/Advantage configurations. Advantage models are configured the same as fully packaged configurations but are available for 24 hour delivery.

Duplex Air Compressors

CHAHR5D12A

• utilize two basic compressors and two motor assemblies mounted on a horizontal tank. • Alternator controls allow for single or dual unit operation. • Equipped with two magnetic starters and an alternator relay. • All units include: Mounted mag starter, vibro isolators, auto tank drain, low level switch.

Features


10 hp 240 Gallon Package Configuration• CHAHR10D24C - 10 hp, 240 gallon horizontal tank. 208 volts, 3 phase.

15 hp 240 Gallon Package Configuration• CHAHRA15D24C - 15 hp, 240 gallon horizontal tank. 208 volts, 3 phase. • CHAHRA15D24D - 15 hp, 240 gallon horizontal tank. 230 volts, 3 phase. • CHAHRA15D24E - 15 hp, 240 gallon horizontal tank. 460 volts, 3 phase.




• CHACRN25A1 - 1/3 hp refrigerated air dryer. 115 volt, 1 phase, 60 Hz, 24 s.c.f.m. Application: 5 or 7.5 hp single. • CHACRN35A1 - 1/3 hp refrigerated air dryer. 115 volt, 1 phase, 60 Hz, 35 s.c.f.m. Application: 5 hp duplex or 10 hp single. • CHACRN50A1 - 1/2 hp refrigerated air dryer. 115 volt, 1 phase, 60 Hz, 50 s.c.f.m. Application: 7.5 hp duplex or 15 hp single. • CHACRN75A1 - 3/4 hp refrigerated air dryer. 115/230 volt, 1 phase, 60 Hz, 75 s.c.f.m. Application: 10 hp duplex or 20 hp single. • CHACRN100A1 - 1 hp refrigerated air dryer. 115/230 volt, 1 phase, 60 Hz, 100 s.c.f.m. Application: 15 hp duplex or 25-30 hp single. • CHACRN125A1 - 3/4 hp refrigerated air dryer. 230 volt, 1 phase, 60 Hz, 125 s.c.f.m. Application: 20 hp duplex. • CHACRN150A1 - 1-1/2 hp refrigerated air dryer. 230 volt, 1 phase, 60 Hz, 150 s.c.f.m. Application: 20 hp duplex.

Models

Quality components and engineering excellence meld to ensure you of a stable 38°F pressure dew point. Refrigerated Air Dryers

• use with air-cooled aftercooler for maximum efficiency. • Will remove moisture from compressed air. • Maximum pressure - 250 p.s.i.g. ratings in accordance with NFPA recommended standard T3.27.3 - 1976 Class H dewpoint (33˚ - 39˚F) based on 100 p.s.i.g., 100˚F inlet air, 100˚F ambient air with 5 p.s.i. pressure drop.

Features

CHACRN25A1

refriGerAted Air dryerSSuPPLiED By: CHAMPiON, A GARDNER DENVER PRODuCT

*Advantage models are configured the same as Fully Packaged configurations and are available for 24 hour delivery.



8-4


Base Plate Compressor UP Series

• iRCuP6512580 - 5 hp, 80 gallon. Horizontal. 18.5 c.f.m. @ 125 p.s.i. • iRCuP6712580 - 7.5 hp, 80 gallon. Horizontal. 28 c.f.m. @ 125 p.s.i. • iRCuP6101258 - 10 hp, 80 gallon. Horizontal. 38 c.f.m. @ 125 p.s.i. • iRCuP6151258 - 15 hp, 80 gallon. Horizontal. 55 c.f.m. @ 125 p.s.i. • iRCuP6512512 - 5 hp, 120 gallon. Horizontal. 18.5 c.f.m. @ 125 p.s.i. • iRCuP6712512 - 7.5 hp, 120 gallon. Horizontal. 28 c.f.m. @ 125 p.s.i. • iRCuP6101251 - 10 hp, 120 gallon. Horizontal. 38 c.f.m. @ 125 p.s.i. • iRCuP6151251 - 15 hp, 120 gallon. Horizontal. 55 c.f.m @ 125 p.s.i. • iRCuP65125BP - 5 hp, Base plate. 18.5 c.f.m. @ 125 p.s.i. • iRCuP67125BP - 7.5 hp, Base plate. 28 c.f.m. @ 125 p.s.i. • iRCuP610125B - 10 hp, Base plate. 38 c.f.m. @ 125 p.s.i. • iRCuP615125B - 15 hp, Base plate. 55 c.f.m. @ 125 p.s.i. • iRCuP620125 - 20 hp, 120 gallon. Horizontal. 83 c.f.m. @ 125 p.s.i. • iRCuP625125 - 25 hp, 120 gallon. Horizontal. 104 c.f.m. @ 125 p.s.i. • iRCuP630125 - 30 hp, 120 gallon. Horizontal. 126 c.f.m @ 125 p.s.i.

Models

uP Series rotary screw compressors provide best-in-class performance in rotary screw technology. Rated for continuous duty operation, each package comes standard with Ozone Depleting Potential (ODP) electric motor, air-cooled aftercooler, full voltage motor starter, dual control, low sound enclosure, package pre-filter, 9,000 hour ultraPlus coolant and 120 gallon ASME rated tank

UP Series 5-30 hp Rotary Screw Compressors

Tank Mounted UP Series

• Low sound enclosure – 64 to 69 dBA. • 9,000 hour ultraPlus coolant. • Full Voltage Starter. • Leak free design. • High ambient design. • Electromechanical controls.

Features

• iRC2340N5 - 5 hp, 80 gallon. Vertical. • iRC2475N7.5 - 7.5 hp, 80 gallon. Vertical. • iRC2545E10V - 10 hp, 120 gallon. Vertical. • iRC2475D5FP - 5 hp, 80 gallon. Horizontal. includes: Low oil level switch, after cooler and automatic tank drain. • iRC2545E10FP - 10 hp, 120 gallon. Horizontal. includes: Low oil level switch, after cooler and automatic tank drain. • iRC7100E15FP - 15 hp, 120 gallon. Horizontal. includes: Low oil level switch, after cooler and automatic tank drain. • iRC2000E20FP - 20 hp, 120 gallon. Horizontal. includes: Low oil level switch, after cooler and automatic tank drain. • iRC2000E25FP - 25 hp, 120 gallon. Horizontal. includes: Low oil level switch, after cooler and automatic tank drain. • iRC2475N5FP - 5 hp, 80 gallon. Vertical. includes: Low oil level switch, after cooler and automatic tank drain. • iRC2475N75FP - 7.5 hp, 80 gallon. Vertical. includes: Low oil level switch, after cooler and automatic tank drain. • iRC2545K10FP - 10 hp, 120 gallon. Vertical. includes: Low oil level switch, after cooler and automatic tank drain.• iRC7100E15V - 15 hp, 120 gallon. Horizontal. includes: Low oil level switch.

Models

ingersoll Rand’s legendary Type-30 air compressors have been providing unsurpassed performance in the most demanding applications for over 75 years. The Type-30 compressors are recognized as the industry’s benchmark for quality, power and reliability — that’s why they remain the world’s best-selling reciprocating compressor. Whether you’re a small shop owner, auto body, or repair business owner, there is a Type-30 air compressor that will meet your needs.

Type-30 Series Air Compressors

• 100% cast iron construction. • 1-pc. connecting rod. • Finned copper intercooler.

Features

Air CompreSSorS SuPPLiED By: iNGERSOLL-RAND



8-5


• iRC22475E75F - Two 7.5 hp motors, 120 gallon tank. Horizontal. 48.6 a.c.f.m. @ 90/175 p.s.i.g. Dimensions 72”L x 45”W x 53”H, Weight: 1,350lbs. • iRC22545E10F - Two 10 hp motors, 120 gallon tank. Horizontal. 70.2 a.c.f.m. @ 90/175 p.s.i.g. Dimensions: 76”L x 47”W x 57”H, Weight: 1,560lbs. • iRC22545A10F - Two 10 hp motors, 240 gallon tank. Horizontal. 70.2 a.c.f.m. @ 90/175 p.s.i.g. Dimensions: 100”L x 47”W x 62”H, Weight: 1,885lbs. • iRC27100E15F - Two 15 hp motors, 120 gallon tank. Horizontal. 104.2 a.c.f.m. @ 90/175 p.s.i.g. Dimensions: 76”L x 51”W x 62”H, Weight: 1,960lbs. • iRC27100A15F - Two 15 hp motors, 240 gallon tank. Horizontal. 104.2 a.c.f.m. @ 90/175 p.s.i.g. Dimensions: 85”L x 50”W x 67”H, Weight: 2,285lbs. • iRC22000A20F - Two 20 hp motors, 240 gallon tank. Horizontal. 146.0 a.c.f.m. @ 90/175 p.s.i.g. Dimensions: 89”L x 54”W x 71”H, Weight: 3,285lbs. • iRC22000A25F - Two 25 hp motors, 240 gallon tank. Horizontal. 168.0 a.c.f.m. @ 90/175 p.s.i.g. Dimensions: 89”L x 54”W x 71”H, Weight: 3,285lbs.

Models

ingersoll-Rand Duplex compressors offer two individual compressor pumps and motors mounted on a single unit, providing 100% built-in backup or additional air power for those larger capacity jobs. The Duplex is ideal in applications where available power does not allow for a single larger compressor.

Type 30 Series Duplex Fully Packaged Air Compressors 5-25 hp

• 24-hour continuous duty cycle for the toughest applications. • Durable cast-iron construction. • 100% built-in backup or additional air for larger capacity jobs.

Features

Air CompreSSorS SuPPLiED By: iNGERSOLL-RAND

• iRC32305880 - Start-up kit. 5-7.5 hp. • iRC32305898 - Start-up kit. 10-15 hp. • iRC32305906 - Start-up kit. 20-30 hp.

Models

Start-up Kit contains all the parts needed to maintain your compressor for one year. All season select synthetic lubricant, two air filter elements, material safety data sheets, product sheets.

Air Compressor Start-Up / Maintenance Kits

Air CompreSSor StArt-Up/mAintenAnCe KitSSuPPLiED By: iNGERSOLL-RAND

• iRCDS5 - Refrigerated air dryer 5 c.f.m. Dimensions: 17.9”H X 7.8”W X 17.7”D, Air connection NPT: 3/8”, Weight: 40lbs. • iRCDS10 - Refrigerated air dryer 10 c.f.m. Dimensions: 17.9”H X 7.8”W X 17.7”D, Air connection NPT: 3/8”, Weight: 40lbs. • iRCDS15 - Refrigerated air dryer 15 c.f.m. Dimensions: 17.9”H X 7.8”W X 17.7”D, Air connection NPT: 3/8”, Weight: 44lbs. • iRCDS25 - Refrigerated air dryer 25 c.f.m. Dimensions: 20.9”H x 11.1”W x 23.6”D, Air connection NPT: 1/2”, Weight: 70lbs. • iRCDS35 - Refrigerated air dryer 35 c.f.m. Dimensions: 20.9”H x 11.1”W x 23.6”D, Air connection NPT: 1/2”, Weight: 74lbs. • iRCDS50 - Refrigerated air dryer 50 c.f.m. Dimensions: 23.8”H x 13.9”W x 27.6”D, Air connection NPT: 3/4”, Weight: 100lbs. • iRCDS75 - Refrigerated air dryer 75 c.f.m. Dimensions: 23.8”H x 13.9”W x 27.6”D, Air connection NPT: 3/4”, Weight: 122lbs.

Models

ingersoll-Rand dryers are built for use with air compressors with aftercoolers. DryStar Refrigerated Dryers

• Each dryer cools the air by mechanical refrigeration to a 33° - 39°F dewpoint. • Condensed water is removed thru an automatic drain valve. • Ratings are based on 100°F and 100 p.s.i.g. air inlet temp and pressure. • Max p.s.i. is 232. Each DryStar dryer uses R134A refrigerant.

Features

refriGerAted Air dryerSSuPPLiED By: iNGERSOLL-RAND



8-6


Get more work done in less time. This Knuckle Saver™ has a unique reactionless mechanism. it makes gearing unnecessary, so you get more speed and power. it absorbs kickback when the nut runs tight, so you don’t bust your knuckles. Great for work on muffler clamps, shocks, stabilizer pins, bar clamps, water pumps, radiators, spark plug replacement and air conditioning units. 10-50 ft.-lbs., 10.5” long.

IRC111 - Air Ratchet Wrench (Knuckle Saver™, Reaction-less)

This classic is the most popular tool in its class. introduced over 25 yeas ago and continuously refined, it offers the sheer power and performance features to tackle the toughest jobs with ease - as well as proven durability and economy. Exclusive impact mechanism. Pressure-feed lubrication. Adjustable power regulator. Easy to service two-piece construction. Contoured handle for comfort and control. Maximum torque: 425 ft.-lbs.

IRC231C - 1/2” Super Duty Air Impact Wrench

Air tooLSSuPPLiED By: iNGERSOLL-RAND

• HuT3960 - Sander with 6” PSA pad • HuT3960H - Sander with 6” Hookit pad

Models

Designed for rapid material removal while still delivering the legendary Hutchins smooth, balanced performance.Super Sander III

HUT3960

• Constructed with a composite motor housing and shroud. • Delivers vibration-free sanding in a lightweight package. • 4-bearing support and oversized drive head eliminate pad wobble and ensure full pad support.

Features

• HuT7544 - Sander with 6” Hookit pad • HuT7544RH - Sander with 6” reverse hook pad

Models

The Model 7544 Waterbug iii, a very versatile water sander, reduces your wet sanding time from hours to minutes!Water Bug III

HUT7544

• High-pressure water hose with filtered, venturi-generated flow, guarantees effective water sanding anywhere. • Low profile, lightweight, random-orbit sander. • Precision speed-control ensures versatile choices, from preliminary surface preparation to immaculate finishes.

Features

• HuT3560 - Sander with 6” PSA pad standard • HuT3560H - Sander with 6” Hookit pad

Models

• Composite motor housing and shroud reduce weight and insulate to ensure vibration-free sanding. • unique 4-bearing support and oversized drive head eliminate pad wobble while ensuring full pad contact. • includes a patented pad release feature.

FeaturesRapid material removal in a lightweight, low profile configuration. Random Orbit Action Sander

HUT3560

Air tooLSSuPPLiED By: HuTCHiNS MFG.

The `Stubby` lets you squeeze into very snug spaces without feeling squeezed while you run small fasteners. Excellent for body shop repair jobs and light duty work under the dashboard. 20 ft.-lbs. maximum torque, only 6-1/2” long.

IRC103A - Air Ratchet Wrench (1/4” Stubby, Standard-Duty)



8-7


Air tooLSSuPPLiED By: HuTCHiNS MFG.

Powerful twin-drive for perfect alignment, with 2-Cylinder reciprocal thrust impelled by vertically-engaged gears guarantees smooth synchronized strokes of superior surface preparation. Eliminates operator fatigue, while providing full contact sanding without battering the surface. Multi-options include full COAXiAL hose for choice of vacuum sanding or dust-free sanding using a detachable Dust Bag for shops without vac-systems. Comes complete with Dust Bag.

HUT8620 - Straightline Action Sander

World’s most versatile Random-Orbit sander. Drive head enforces full-contact sanding for achieving the ultimate in finishes. High-torque motor impelled by special balanced rotor utilizing self-expanding 2-piece vanes generates torque powerful enough to drive 5”, 6” or 8” pads. 6” pad is standard.

HUT8650 - Random-Orbit Sander

Versatile. Adapts to all functions from heavy-duty to finishing. Excellent for leveling or planing with over 45 square inches of full contact sanding enforced by a 5-point suspension system, and a Hutchins powerful Air-efficient motor.

HUT4932 - Orbital Action

Air tooLSSuPPLiED By: SNAP-ON TOOLS

Blue-Point dual action air sander. Dual rotary orbit reduces the severity of abrasive grinding marks making the AT400C an excellent finishing tool. Double keyed rotor shaft for longer tool life. Recommended air pressure: 60 p.s.i.g. Air consumption, free speed: 2.1 c.f.m.

AT400C - Dual Action Sander

Blue-Point in line heavy-duty air sander. 17-1/2” pad length. Recommended air pressure: 90 p.s.i.g. Air consumption, free speed: 2.3 c.f.m.

AT475A - In Line Sander

Blue-Point Jitterbug 9” air sander. Recommended air pressure: 90 p.s.i.g. Air consumption, free speed: 3.0 c.f.m.AT435A - Jitterbug Sander

Blue-Point 5” disc, air sander. Recommended air pressure: 90 p.s.i.g. Air consumption free speed: 4.5 c.f.m.AT425E - 5” Disc Sander

4-1/2” Compact Grinder. includes (1) 4-1/2” diameter x 3/16” thick grinding disc. AT415B - Compact Air Grinder



8-8


• WiL744 - 4” mechanic’s vise. • WiL1745A - 4-1/2” tradesman bench vise. • WiL1550 - 5” high visibility safety vise. • WiL745 - 5” mechanic’s vise. • WiL1755A - 5-1/2” tradesman bench vise. • WiL1560 - 6” high visibility safety vise. • WiL746 - 6” mechanic’s vise. • WiL1780A - 8” tradesman bench vise.

Models

The best buy for the professional automotive technician. Replaceable hardened steel jaws give you a sure grip. The swivel base won’t slip even under maximum torque. Straight line design means no wear on nut.

Bench Vises

WIL744

• Replaceable serrated steel jaw inserts and pipe jaws. • Rugged 30,000 p.s.i. body parts. • 360° locking swivel base.• Fully enclosed spindle and nut.

Features

BenCh GrinderS / ViSeS & StAndSSuPPLiED By: WMH TOOL GROuP

• WiL17201 - 6” bench grinder. • WiL17202 - 8” bench grinder.

Models

Sharpen drill bits, scissors, knives and cutting tools quickly and easily. u.L. approved. Equipped with one medium and one coarse grinding wheel.

Bench Grinders

WIL17202

• Adjustable tool rests and spark deflectors. • Double strength eye shields. • Sturdy wheel guards. • Lighted on/off switch.

Features

• WiL159V - Pedestal base for bench vise. Heavy-duty fabricated steel. • WiL577172 - Pedestal base for bench grinder. Heavy-duty cast iron construction.

Models

Heavy-duty pedestal base for Wilton bench vises and bench grinders.Vise and Grinder Stands

WIL159V

• Heavy-duty construction provides strength and durability.• Wide stance base gives you a stable workstation.

Features

• HKEVGF - Floor Mount Vise/Grinder Stand. • HKEVGW - Wall Mount Vise/Grinder Stand.

Models

Swing out stands provide maximum access to vises and grinders while saving valuable floor space. Multiple locking positions place the job exactly where you need it. Steel base plates measure 8”L x 8”W x 1/4”D,34” high, 150 lbs. capacity.

Vise / Grinder Stands

HKEVGW

BenCh GrinderS / ViSeS & StAndSSuPPLiED By: HERKuLES EQuiPMENT



8-9


Adjustable, cushioned head band is removable and washable. Replaceable face shield measures 8” x 12” x 0.04” (203.2mm x 304.8mm x 1.02mm). Face shield provides improved impact resistance.

GA224B - Face Shield

fACe ShieLdSuPPLiED By: SNAP-ON TOOLS

• HWS7260B - Wall mounted eyewash station. • HWS7461 - Pedestal eyewash station. • HWS7500 - Portable eyewash station. • HWS8300 - Eyewash/shower station. • HWS8901B - Hand-held eye/body spray.

Models

For minor splash and airborne particulate hazards, Haws eyewashes provide immediate relief, with Haws quality and value! Haws emergency eyewash systems use anti-surge Soft-Flo heads that activate with the push of a stainless steel flag.

Eyewash Stations

HWS7260B

• Heads come equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. • A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials. • Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing. • Fully functional in freezing environments when installed properly.

Features

eyewASh StAtionSSuPPLiED By: WRiGHT TOOL / HAWS iNDuSTRiES

• HMH41426 - Anti-Fatigue Mat. 15/16” thick, 24” x 72”. • HMH41428 - Anti-Fatigue Mat. 15/16” thick, 24” x 96”. • HMH41526 - Anti-Fatigue Mat. 9/16” thick, 24” x 72”. • HMH41528 - Anti-Fatigue Mat. 9/16” thick, 24” x 96”. • HMH41535 - Anti-Fatigue Mat. 9/16” thick, 36” x 60”.

Models

Diamond-Plate Spongecote eases the physical stress on the feet, ankles, calves and knees associated with standing on concrete floors for long periods of time. Reducing the physical fatigue on the lower extremities allows the service tech or counter person to concentrate on the task at hand and to remain standing in the critical work zone for longer periods of time. Workers can get more tasks completed in a day’s time. increases worker morale and conveys a more attractive work area.

Anti-Fatigue Mats

Anti-Fatigue Mat• Super resilient, sponge base is Nitricell™ rubber and PVC, will not separate from backing. • 100% Koroseal® vinyl Diamond-Plate surface has a tough look and provides traction under foot, even with fluid spills on the top surface. • impervious to brake fluids, brake cleaning fluids, gasoline, oils, kerosene, and alcohol. • All edges taper down to floor to prevent tripping hazard, eliminates need to step up and down from mat. • Perfect for location in front of workbenches, diagnostic stations, behind service writer counters and parts counters.

Features

fLoor mAtSSuPPLiED By: HASSEL MATERiAL HANDLiNG CO.



8-10


Designed specifically for the automotive market, the BD Laser™ Computerized Code Cutter/Duplicator can cut a high-security sidewinder key in just 2½ minutes (from vehicle selection to completed key). The BD Laser can duplicate old keys and cut keys by code to exacting specifications, producing smooth, factory-style cut patterns every time.

CUR9200011 - BD Laser™ Electronic Code Cutter/Duplicator

Key Code CUtterSSuPPLiED By: BARNES DiSTRiBuTiON

includes bolt grip puller set, bar type puller set, rear axle puller set, interchangeable puller set and accessory set. Also includes tool control board and wall cabinet.

CJ2000SB - Master Interchangeable Puller Set

interChAnGeABLe pULLer SetSSuPPLiED By: SNAP-ON TOOLS

Professional photometric headlamp aimer that’s affordable, accurate and easy to use. Meets SAE J-600 standard and will accurately aim all North American lamps, standard or aerodynamic, large or small, with or without aiming pads, and even fog lights. unit is completely portable and uses rechargeable Ni-Cad batteries. The viewing port lets the operator see the lamp patterns and the floor slope adjustments provide a way to determine the compensate for floor slope. Track is included.

HOP82005 - Headlamp Aimer

heAdLAmp AimerSSuPPLiED By: AMERiCAN AiMERS

GreASe GUnSuPPLiED By: ALEMiTE CORPORATiON

Battery powered 12 volt grease gun with innovative ergonomic design. Rugged light weight construction allowing quick and efficient lubrication. includes heavy-duty plastic carrying case for safe storage and transportation. Flow rate: 5.25 ounces per minute at 1,000 p.s.i.

ALR575B - Battery Powered Grease Gun



8-11


Professional quality performance! The ultracode A/T is an innovative electronic code-cutting machine designed to cut automotive keys by bitting number, indirect code, or duplication.

ILCULTRACODE - Ultracode Electronic Key Machine

A must for cutting laser or sidewinder keys. Precision machine is easy to use and has built in tool storage. Ergonomically designed with built-in electromechanical calibration.

ILCMATRIX - High Security Key Duplicator

Duplicates most domestic and import car keys quickly, easily and accurately. The titanium nitride coated cutting wheel with 2-7/8” diameter is made of high speed steel. Cuts brass and aluminum keys.

ILC45-110VAC - Heavy-Duty Duplicator

A dual function machine designed to cut automotive keys by code or by duplication. Engineered for the increasingly precise newer generations of locks. Built to last and produce keys in an economical manner.

ILC029ATOY - Combo Key Duplicator w/Upgrade Kit

Key Code CUtterSSuPPLiED By: KABA iLCO

The ilco EZ-Code is an electronic code machine designed to deliver high level performance at a moderate price. Accurate and simple to operate, the ilco EZ-Code will cut automotive and commercial keys by bitting number, indirect code (automotive keys) or by duplication. Special features include: automatic calibration, key edge detection (with automatic taper correction), versatile two-position vise jaw, and powerful on-board data base of automotive codes and automotive/commercial key cut specifications.

ILCEZCODE - Electronic Code Key Cutting Machine



8-12


SEDXLWS

• SEDXL - KeyKeeper XL Key Drop-Off Security System • SEDXLWS - KeyKeeper XL with stand Key Drop-Off Security System. Free Standing Model

Models

KeyKeeper XL is a theft proof key and service envelope drop system for service or parts departments and body shops. KeyKeeper XL is also ideal for buy-here-pay-here businesses requiring regular payment deposits. KeyKeeper XL allows you to accept customer keys in a totally secure environment, virtually eliminating any risk of your customers’ vehicles being stolen while keys are in your control.

SEDXL - KeyKeeper XL Theft Proof Key Envelope Drop-Off

SEDXL• 1/4” and 3/16” plate steel construction. • unique gated slot and other security features prevent fishing or blocking of the drop slot. • Each KeyKeeper is individually hand made for quality. • Self contained – includes writing surface and envelope storage compartment. • Master puck lock will resist sledgehammer blows. Hasp is concealed to prevent any chances of sawing through the lock.

Features

Key drop-off SeCUrity SyStemSSuPPLiED By: SECuRE iNDuSTRiES / KEyKEEPER

Convenient after hours metal key drop box for outdoor use. Made of weatherproof material.DLC80014 - Key Drop Box

Key drop-off SeCUrity SyStemSSuPPLiED By: DELL CORNiNG CORPORATiON

Give your customers the convenience they deserve with the Nite Drop Zone. To drop off their vehicle, customers simply complete a convenient and familiar service envelope, insert keys, and drop it into the Nite Drop Zone Vault. Easy to understand decals will walk you through the process. No need for a separate mail slot. Avoid lost keys, smudged envelopes, etc.

SPTSC3985CS - Nite Drop Zone Key Vault System

Key drop-off SeCUrity SyStemSSuPPLiED By: SPECTRuM COMPOSiTES iNC.

Customers simply enter a 5-digit PiN (Personal identification Number) supplied by you or your customer) and the KEyper 24 dispenses the keys, displays directions to their vehicle so they can be on the road right away. it’s that easy! Warranty customers will appreciate the “no hassle, no wait” convenience this system provides. The KEyper 24 can also be used to pick up loaner vehicles.

KYPKSE20 - KEYper® Service Express 24

Key drop-off SeCUrity SyStemSSuPPLiED By: KEyPER SySTEMS



8-13


• BJENR - Oil filter crusher stand. • BJECSR - Oil filter crusher stand with reservoir.

Models

Heavy gauge steel stand for use with BJEC4 & BJEC6 oil filter crushers. Constructed from industrial grade steel. Oil Filter Crusher Stands

BJENR

• BJEC4 - Pneumatic oil filter crusher. Crushing chamber accepts filters 7-1/2” tall x 5” diameter. • BJEC6 - Pneumatic oil filter crusher. Crushing chamber accepts filters 10” tall x 7” diameter.

Models

Reduces filters to 25% of original size, and removes 95% of the free-flowing oil so it can be recycled. Oil Filter Crushers

BJEC4

• Only one moving part. • Safety door - crusher will not operate if door is opened. • Air regulator, oiler and lubricator not needed. • All parts in contact with air are rust proof.• 12” flexible drain hose included.

Features

oiL fiLter CrUSherS & StAndSSuPPLiED By: BJ ENTERPRiSES

• KyPM50-1 - 50 KEyper® unit. 50 - KEyper® Plugs. • KyPM100-1 - 100 KEyper® unit. 100 - KEyper® Plugs. • KyPM150-1 - 150 KEyper® unit. 150 - KEyper® Plugs.

Models

A Tamper Seal secures one or more keys to each key plug, and can’t be removed unless the wire is cut. Persons authorized to remove keys insert their personalized Access Peg into the right port of the desired key location, twist to release the keys and remove them.

KEYper® Mechanical Key Control System

KYPM100-1

• Quick visual key inventory audit. • No electronics – all mechanical. • Lowest cost option for key control. • Simple operation – easy to use.

Features

Key mAnAGementSuPPLiED By: KEyPER SySTEMS

• HKEOFC-1 - Car/Light Truck Filter Crusher. Crushing strength: 3.75 tons, Capacity: 1 filter, Cycle time: 15 seconds, Dimensions: 71”H x 23”W x 12”D. • HKEOFC-3 - Car/Light Truck Filter Crusher. Crushing strength: 15 tons, Capacity: 1-4 filters, Cycle time: 35-55 seconds, Dimensions: 57”H x 32”W x 27-3/4”D. • HKEOFC-4 - Heavy Duty Filter Crusher. Crushing strength: 18 tons, Capacity: 1-4 filters, Cycle time: 35-55 seconds, Dimensions: 67”H x 32”W x 27-3/4”D.

Models

Provides both an economical and an environmentally friendly means to dispose of used oil filters. After crushing, the filters are no longer classified as hazardous waste and can be transferred to metal recyclers and disposal sites with no toxic cleanup liability.

Oil Filter Crushers

HKEOFC-1

• using Air-Bag technology to apply force, our crushers extract up to 98% of the oil and reduce the filter size by 80% for clean compact disposal. • Dual door/latch interlock system to provide operator safety. • 100% air operated.

Features

oiL fiLter CrUSherS & StAndSSuPPLiED By: HERKuLES EQuiPMENT



8-14


• uNiuG1000M - One gun washer • uNiuG1000D - One gun washer, two pails, ready to combine with a uni-ram Solvent Recycler (p. 8-17). • uNiuG4000DV - Two gun washer with vent, clean rinse and manual cleaning brush. • uNiuG4000E - Two gun washer with vent, clean rinse and manual cleaning brush, two pails, ready to combine with a uni-ram Solvent Recycler (p. 8-17).

Models

Cleans siphon, pressure and gravity feed spray guns.Gun Washers

UNIUG4000E

• Stainless-steel tank and delivery tube for years of service. • Air Consumption: 2 c.f.m. (58 liters per minute). Output: 3 uS Gal (12 liters) per minute at 85 p.s.i. (5.8 kg/cm2). • Safety Switch terminates cleaning cycle when lid is raised. • Operator has minimal exposure to solvent; cleaning is “hands-free”. • Solvent pail is kept inside cabinet. • Wash Solvent is reused until dirty.

Features

pAint GUn wASherSuPPLiED By: uNi-RAM

Portable, hand-held capability for small scale abrasive sanding jobs. Lightweight aluminum construction designed with a flat base to provide an upright resting position. underslung 4 lb. capacity sand holder improves balance and user comfort. Requires 5 or 12 c.f.m. at 100 p.s.i. Red.

PSB500AR - Portable Sandblaster

SAndBLASterSSuPPLiED By: SNAP-ON TOOLS

• OTC1821 - 10 Ton Air Powered Oil Filter Crusher. Crushes up to 4 oil filters at one time in just 20 seconds. includes mounting stand. • OTC1875 - 25 Ton Automotive Oil Filter Crusher. Automatic cycle feature: load the filter, push a button, and walk away. includes air/hydraulic pump that works on standard shop air. Optional floor stand available. • OTC1876 - Optional Floor Stand for Oil Filter Crusher OTC1875.

Models

Crushing oil filters removes excess oil minimizing the potential for an environmental spill and possible fines. Depending on the state you are in, crushed oil filters may not be considered hazardous waste and may then be recycled as scrap metal. Crushed oil filters also take up less valuable space in the holding containers which can also reduce the cost of disposal.

Oil Filter Crushers

OTC1821

• Engineered and built for dependable operation. • American-made and covered by Lifetime marathon warranty & registration. • Generous size of crushing chamber easily accommodates the largest automotive spin-on filters.

Features

oiL fiLter CrUSherS & StAndSSuPPLiED By: OTC / DiV. OF SPX CORPORATiON



8-15


Stool with 18” diameter tool tray ends squatting, bending or kneeling in maintenance and service operation. Seat height: 19-1/2” - 26-3/4”, Seat capacity: 250 lbs.

LYO2088N - Tool Trolley

SeAt CreeperSuPPLiED By: LyON WORKSPACE PRODuCTS

Heavy-duty seat with plastic drawer. Seat pad has plywood base, high density 80 lb. foam that measures 1-3/4” thick, and overall pad measures 10” x 14-1/4”.

JCW80R - Seat Creeper

SeAt CreeperSuPPLiED By: SNAP-ON TOOLS

Cleans right down to the bare metal in seconds with no mess and low noise levels. The integrated recycling system keeps your workshop clean and media consumption to a minimum. This is the ideal tool for preparing small surfaces for repaint, touch-ups or welding. The set is completed with a starter supply of 0.25L (8.5 oz) blast grit.

CEJ501061 - Rust Eater Recycling Spot Blaster

SAndBLASterSSuPPLiED By: VACuLA AuTOMOTiVE PRODuCTS

• DLC70000 - Dispatch numerals 000-999, 1/box. • DLC70001 - Dispatch numerals 1000-1999, 1/box. • DLC70002 - Dispatch numerals 2000-2999, 1/box. • DLC70003 - Dispatch numerals 3000-3999, 1/box. • DLC70004 - Dispatch numerals 4000-4999, 1/box. • DLC70005 - Dispatch numerals 5000-5999, 1/box. • DLC70006 - Dispatch numerals 6000-6999, 1/box. • DLC70007 - Dispatch numerals 7000-7999, 1/box. • DLC70008 - Dispatch numerals 8000-8999, 1/box. • DLC70009 - Dispatch numerals 9000-9999, 1/box.

ModelsCar repair numbers with detachable key tag and claim check. Sold in sets of 1000. Recyclable. Dispatch Numerals

SerViCe identifierSSuPPLiED By: DELL CORNiNG CORPORATiON



8-16


• NRi78025 - 20 and 25 ton capacity shop press accessory kit. includes arbor plates, “V” pushing adapter 3/4” diameter ram and bearing puller. • NRi78060 - 50 ton capacity shop press accessory kit. includes arbor plates, threaded adapter, ram cap, “V” pushing adapter, 1” diameter ram, 1-1/4” diameter ram and bearing puller.

ModelsAccessory kits for shop presses. Accessory Kits

NRI78060

• NRi78013A - 12 ton capacity hand pump shop press. Manual pump power unit with “Parkerized” pump piston, ram and extension screw to inhibit rust from entering the hydraulic system. • NRi78022D - 20 ton capacity hand pump shop press. Manual pump power unit with “Parkerized” pump piston, ram and extension screw to inhibit rust from entering the hydraulic system. • NRi78024 - 25 ton capacity air/hydraulic pump shop press. Air/hydraulic foot pump provides hands free operation. Liquid filled gauge measures ram force in pounds and tons. • NRi78057A - 50 ton capacity air/hydraulic pump shop press. Air/hydraulic foot pump provides hands free operation. 10’ hose included. Liquid filled gauge measures ram force in pounds and tons.

Models

use for straightening, bending and pressing, removing and installing gears, bearings and bushings.Shop Presses

NRI78024

• Pair of bed plates included (except model NRi78057A) • Zero distortion, heavy-duty structural steel frame

Features

Shop preSSeS & ACCeSSorieSSuPPLiED By: NORCO iNDuSTRiES, iNC.

Raises and lowers press bolsters to desired height. Features brackets for mounting rollers and winch. For use with OTC1825 shop press.OTC211407 - Winch

• OTC1880 - 17-1/2 ton press accessory set. use with OTC1825 Open Throat® press. • OTC1881 - 25 ton press accessory set. includes ram forcing cap and threaded adapter.

Modelsincludes bearing pulling attachment, ram pushing adapters, V pushing adapter, pair of V blocks.Shop Press Accessory Sets

• OTC1823 - Bottle jack press. 12 ton bottle jack with 5-7/8” stroke. • OTC1824 - Bottle jack press. 20 ton bottle jack with 6-5/8” stroke. • OTC1825 - Heavy-duty Open Throat® press. 17-1/2 ton capacity. Moves side to side for off center pressing. • OTC1833 - 25 ton shop press. 6-1/4” stroke ram and hand pump. ideal for pressing rear axle bearings, piston pins, and more. • OTC1834 - 25 ton shop press. 6-1/4” hydraulic stroke ram, air driven hydraulic pump. Large 30” x 46” work area.

Modelsideal for bending, pressing, and straightening work. Shop Presses

OTC1824

OTC1881

Shop preSSeS & ACCeSSorieSSuPPLiED By: OTC / A DiViSiON OF SPX



8-17


• CG770Hy - 35 ton floor press. • CG570BHy - 50 ton floor press.

Modelsincludes table-lifting mechanism, frame, ram, pump and work blocks. Shop Presses

CG570BHY

Shop preSSeS And ACCeSSorieSSuPPLiED By: SNAP-ON TOOLS

• NWyKA1336 - Toyota valve seat cutter kit. • NWyKA133645 - 45° Toyota valve seat cutter kit. For 15°x 45° cutters.

Models

Valve seat reconditioning is simple, accurate, and clean with Neway’s carbide-bladed cutters. Neway’s user-friendly cutters allow you to precisely machine a multi-angle valve seat in a matter of minutes.

Valve Seat Cutter Kit

NWYKA1336

• No need for lapping. • Leaves a perfectly flat, machined surface. • ideal for optimal sealing efficiency and heat transfer.

Features

VALVe SeAt CUtterSuPPLiED By: NEWAy MANuFACTuRiNG

• uNiuRS500 - Economy, 5 gallons (20L), 120V • uNiuRS500EP2 - uNiuRS500 with Auto Transfer • uNiuRS900 - Mid Size, 6.6 gallons (25L), 240V • uNiuRS900EP2 - uNiuRS900 with Auto Transfer

Models

Minimize Waste Generation. For use with Paint Thinner, Lacquer Thinner, Heptane, Toluene, Gun Washer Solvent, Xylene, Acetone, Methanol, isopropyl alcohol.

Automatic Solvent Recyclers

UNIURS900

• Provide clean solvent every day; clean solvent washes better and faster. • Eliminate the need to haul dirty solvent off-site for disposal; no solvent manifest to complete. • Lowers solvent purchase and disposal costs.

Features

SoLVent reCyCLerSSuPPLiED By: uNiRAM

• 0042226000FE - Toyota logo fender cover. • DLC60001 - Fender cover, no logo.

ModelsVinyl cover has a “cling tight” backing to keep it in place. Topstitched seams on top prevent tools from rolling off. Fender Covers

0042226000FE

VehiCLe proteCtion (interior/exterior)SuPPLiED By: DELL CORNiNG CORPORATiON



8-18


0042223000PA

• 0042223000PA - Toyota logo plastic coated paper floor mat, 500/case, 17” x 22”.• 0042224000PL - Toyota logo 3-ply plastic floor mat, 500/roll, 17” x 19”. • DLC20000 - 3-ply plastic floor mat, no logo, 500/roll, 17” x 19”. • DLC20004 - Plastic coated paper floor mat, no logo, 500/case, 17” x 22”. • DLC20008 - Heavy weight Eco-Barrier™ mats, no logo, 500/case, recyclable.

Models

These all weather floor mats have an absorbent top with plastic undercoating that helps to protect vehicle carpeting against grease or oily shoes and spills.

Floor Mats

0042224000PL

• DLC66015 - 15 gallon trash bags, 300/roll. • DLC66035 - 35 gallon trash bags, 150/roll. • DLC66055 - 55 gallon trash bags, 100/roll.

ModelsThese bags fit every container from a 55 gallon drum to an office wastebasket. Trash Bags

DLC41110

0010200699RA

0042222000BA• 0010200699GE - Toyota logo economy parts bags, 1000/case, recyclable. • 0010200699RA - Economy parts bag dispenser.• 0042222000BA - Toyota logo plastic parts bags, 500/roll. • DLC40002 - Plastic parts bags, no logo, 500/roll. • DLC40004 - Economy parts bags, no logo, 1000/case, recyclable. • DLC41110 - 3-ply SuV tire storage bag, no logo, 100/roll.

Models

These heavy-duty parts and storage bags are great for keeping vehicle parts together, preventing spare tires from soiling trunks, backseats or clothing, and maintaining a clean and organized service facility.

Parts and Storage Bags

0010200699GE


• 0042221000SE - Toyota logo seat protectors, 200/roll. • DLC10001 - Plastic seat protectors, no logo, 200/roll. • DLC10010 - Fabric seat blazer, non-slip, no logo, 100/case.

ModelsThese seat covers provide maximum protection for the vehicle’s upholstery.Seat Covers

0042221000SE



8-19


• DLC62032 - Medium, 100/box. • DLC62033 - Large, 100/box. • DLC62034 - Xlarge, 100/box.

ModelsThese gloves are oversized, two-ply, specially formulated and chemical resistant. Heavy-Duty Tufflene Disposable Gloves

• DLC61032 - Medium, 100/box. • DLC61033 - Large, 100/box. • DLC61034 - Xlarge, 100/box.

• DLC30004 - Fabric, Non-Slip Steering Wheel Cover, no logo, 500/case. • 004225000WH - Reusable, Plastic Steering Wheel Cover, no logo, 500/case.

Models

Models

The only two-ply glove with a “Powder Free” polyurethane lining. These gloves are superior to Nitrile™, industrial strength, latex free, resistant to most chemicals.

Keeps steering wheel free of grease, grime and most chemicals.

nAnothene™ Disposable Gloves

Steering Wheel Covers


• 0042220010ST - Toyota dispensing stand. • DLC80001 - Dispensing stand.

Models

This space saving dispenser stand will accommodate a complete line of service protective products. Ample room on storage shelf and bottom for extra products. includes tension belts to regulate the dispensing of product. Easy assembly.

Vehicle Interior/Exterior Product Dispenser

0042220010ST

004225000WHDLC30004

VehiCLe proteCtion prodUCt diSpenSerSuPPLiED By: DELL CORNiNG CORPORATiON

worK LiGhtSSuPPLiED By: CENTRAL TOOLS

• CNT11012-00 - Anglelite with 1’ cord. • CNT11016 - Anglelite with 40’ heavy-duty reel.

Models

Work lights with a patented angle style.Anglelite Work Light

• unique impact and solvent resistent construction. • Patented Bounce-Bulb for superior impact protection. • Magnetic clamp with Velcro strap.• Recessed power switch.

Features

CNT11016



8-20


• JSP10250A - Micro Pro Bend-A-Light. 1/8” diameter lamp. • JSPSM10150A - 16” Pro Bend-A-Light. 3/16” diameter lamp. • JSP15150A - 24” Krypton Pro Bend-A-Light. Penetrating glare-free light. 3/16” diameter high-intensity krypton lamp.

Models

High intensity flexible lights bend and hold position. Provides bright light in tight spaces. Flexible Lights

JSP15150A

• Durable handle with brass shafts. • Batteries included. • Protective cover can be used for extension.

Features

worK LiGhtS SuPPLiED By: JS PRODuCTS

Space saving vertical configuration.DLC80016 - Work Order Rack

worK order rACKSuPPLiED By: DELL CORNiNG CORPORATiON

• CLP610307 - 13 Watt Fluorescent Heavy-Duty Cord Reel. Grounded handle outlet, 25’ cable, clip magnet. • CLP611325 - 13 Watt Angled Trouble Light. Energy saving, light weight, power-on indicator light. Adjustable front and rear hanging hooks, rotating magnetic clip, grounded outlet in handle, 25’ cable. • CLP612250 - 13 Watt Angled Fluorescent Work Light. Angled/compact for lighting tight spots. Grounded handle outlets, 25’ cable, clip magnet. • CLP620240 - 13 Watt Fluorescent cord reel. 2 conductors, 40’ cable, automatic shut off. • CLP769770 - Rugged duty incandescent work lamp, outlet handle, 25’ rubber cord. • CLP769771 - Rugged duty incandescent work lamp, outlet handle, 40’ rubber cord.

ModelsDiverse line of work lights and cord reels that meet the needs of professionals.Work Lights

CLP610307

worK LiGhtS

worK LiGhtS

SuPPLiED By: CLiPLiGHT MANuFACTuRiNG COMPANy

SuPPLiED By: CENTRAL TOOLS

This work light bounces instead of breaking. Features a fully enclosed safety switch and patented Bounce-Bulb for superior impact protection.

This high efficiency, 25 watt, 4’ fluorescent tube lights up an entire engine compartment. The protective hook covers prevent damage to painted surfaces and the adjustable length make it easier to position the light where it is needed. 25’ cord.

CNT12023 - Bounce Lite® with 40’ Heavy-Duty Reel

CNT13003 - Underhood Lite® with LitePerch®

General Shop Equipment - Snap-onsbsprograms.snapon.com/Forms/Toyota/Ty_Sec8_GeneralShop.pdf ·...

Documents

Transcript of General Shop Equipment - Snap-onsbsprograms.snapon.com/Forms/Toyota/Ty_Sec8_GeneralShop.pdf ·...