General Manifolds With DPHarp Specifications EJA and EJX ... · Contact your nearest Yokogawa...

Manifolds With DPHarp EJA and EJX Pressure and Differential Transmitters

Manifold Construction• 316 Stainless Steel (code S)• 4/16” UNF zinc plated carbon steel or

stainless steel (/SSB option) bolts • NACE compliant (/NC option)• Oxygen clean service (/OXY option)• Optional mounting brackets • 3.1.b. material certificate always included• Assembly of transmitter including 6 bar

pressure test• Other materials on request:

Monel (code M) Duplex (code D1) Super Duplex (code D2) Hastelloy (code HC) Carbon Steel (code C) Titanium (code T)

Manifold Rating• Direct mount manifolds are rated up to

6000 psig (414 barg)• Remote mount manifolds are rated up

to 6000 psig (414barg) and 10 000 psig (689 barg)

Manifold Marking• All manifold are permanently marked with

line diagram showing manifold capability

GeneralSpecifications

Yokogawa Europe bv has included Parker Hannifin manifolds in his DPHarp pressure and differential pressure transmitters portfolio to suit all types of installations, specifications and installations. Enclosures (in Glass fibre Reinforced Polyester) suitable for one, two or three process instruments, with manifold and tubing

connections for pressure, flow, temperature or other common process variable instruments, and any accessories required, as electrical heating element (or steam heat tubing, are also available.

Contact your nearest Yokogawa office for quotations

Model Code DescriptionHBSN2FMHBSN2FF 2 valve Block and Bleed Manifold for DPHarp EJA/EJX 510A/530A seriesHBSN2MMHBSN2MF HLS2V 2 valve Remote Mount Block and Bleed Manifold DPHarp EJA/EJX 510A/530A seriesHDS2HLH 2 valve Direct Mount Block and Bleed Manifold for DPHarp EJA/EJX 510A/530A seriesHDS3M 3 valve Direct Mount Block and Bleed Manifold for DPHarp EJA/EJX 310/430A seriesHDS5M 5 valve Direct Mount Block and Bleed Manifold for DPHarp EJA/EJX 110A/120A/130A seriesHLS3M 3 valve Remote Mount Block and Bleed Manifold for DPHarp EJA/EJX 110A/120A/130A seriesHLS5M 5 valve Remote Mount Block and Bleed Manifold for DPHarp EJA/EJX 110A/120A/130A series

GS 07R01Y01-E-E1st Edition

Test/Drain Equalize Test/Drain

IsolateIsolate

Manifold body:this is standardcompact bar stockstyle suitable forenclosureinstallation.Extruded formsare also availableas standard.

Process inlet connections positioned onfront face 1/2” NPT female threads or kidneyflange/oval/futbol are standard. Alternativethread forms, socket or butt weld andPTFree connections are available.Standard connections are on 2.125"/54mm.

Drain/bleed connections the position depends uponmanifold design but are generally on the bottom faceof the manifold. Other optional positions are available.On 3 valve manifold systems test and purge ports areoptional choices.

Bonnet assemblies: are all functionally colour coded, 3 valve manifolds areprovided with 2 IS and 1 EQ. 5 valve manifolds are provided with 2 IS, 2 DR and 1EQ (as illustrated here). Alternatively 5 valve manifolds for custody transfer/fiscalmetering are fitted with 2 IS, 1DR and 2 EQ. For extruded style manifold blocksstraight through flow rising plug style valves can be fitted.

Functional colourcoding:RED =Drain/vent/testBLUE =Isolate/blockGREEN =Equalize

316SS

Part No: HDS5M

PTFE: 260 Deg C (500 F) max.

Model: A1........1/2NPT/1/4NPT www.parker.com 414 BAR (6000 PSI) MAX


IsolateIsolate






316SS

Part No: HDS5M




IsolateIsolate






316SS

Part No: HDS5M



2

Functional Specifications(Common for DPHarp EJA and EJX Pressure Transmitters)* Refer to specific General Specification for Accuracy specifications

Output:Two wire 4 to 20mA DC output with digital communications, linear or square root programmable. BRAIN or HART FSK protocol are superimposed on the 4 to 20mA signal.Output limits conforming to NAMUR NE43 can be pre-set by option code C2 or C3.Digital Communication, via Foundation Fieldbus or Profibus PA protocol, is also available.

Zero Adjustment Limits:Zero can be fully elevated or suppressed, within the lower and upper range limits of the capsule.

External Zero Adjustment:External Zero is continuously adjustable with 0.01% incremental resolution of span. Re-range can be done locally using the digital indicator with range-setting switch.

Ambient Temperature Limits:(Optional features or approval codes may affect limits.)-40 to 85 ºC (-40 to 185 ºF)-30 to 80 ºC (-22 to 176 ºF) with LCD display.

Process temperature Limits:Dependent on seal type and fill fluid selection.

Transmitter Capsule temperature Limits:(Optional features or approval codes may affect limits.)-40 to 120 ºC (-40 to 248 ºF)

Ambient Humidity Limits:0 to 100% RH (EJX)5 to 100% RH (EJA)

EMC Conformity Standard:EN 61326, AS/NZS CISPR11

Supply Voltage:10.5 to 42 VDC for general use and flameproof type10.5 to 32 VDC for lightning protector (option code /A).10.5 to 30VDC for intrinsically safe, type n or non-incendiveMinimum voltage limited at 16.6 VDC (EJX) and 16.4 VDC (EJA) for digital communication, BRAIN and HART

Span and Range Limits:

DPHarp EJX110A Differential Pressure Transmitter

DPHarp EJX910A Multivariable Transmitter

DPHarp EJX430A Gauge Pressure Transmitter

DPHarp EJX510A, 530A Absolute or Gauge Pressure Transmitter

DPHarp EJA110A Differential Pressure Transmitter

DPHarp EJA310A Absolute Pressure Transmitter

DPHarp EJA430A Gauge Pressure Transmitter

DPHarp EJA510A, 530A Absolute or Gauge Pressure Transmitter


<<Contents>> <<Index>>

EJX110ADifferential Pressure Transmitter

Yokogawa Electric Corporation2-9-32 Nakacho, Musashino-shi, Tokyo, 180-8750 JapanPhone: 81-422-52-5690 Fax.: 81-422-52-2018

GS 01C25B01-01E

GS 01C25B01-01E©Copyright Feb. 20046th Edition Aug. 2005

The high performance differential pressure transmitterEJX110A features single crystal silicon resonantsensor and is suitable to measure liquid, gas, orsteam flow as well as liquid level, density and pres-sure. EJX110A outputs a 4 to 20 mA DC signalcorresponding to the measured differential pressure.Its highly accurate and stable sensor can also mea-sure the static pressure which can be shown on theintegral indicator or remotely monitored via BRAIN orHART communications. Other key features includequick response, remote set-up using communications,self-diagnostics and optional status output for pressurehigh/low alarm. FOUNDATION Fieldbus protocol typeis also available. All EJX series models in theirstandard configuration, with the exception of theFieldbus type, are certified by TÜV as complying withSIL 2 for safety requirement.

�STANDARD SPECIFICATIONSRefer to GS 01C25T02-01E for Fieldbus communica-tion type marked with “�.”

� SPAN AND RANGE LIMITSMeasurement Span/Range

L

M

H

0.1 to 10

–100 to 100

–5 to 5 kgf/cm2

Span

Span

Span

Range

Range

Range

kPa

0.4 to 40–40 to 40

–400 to 4002 to 400

–10 to 100.5 to 100

2.5 to 500–500 to 500

inH2O(/D1)

10 to 2000–2000 to 2000

mbar(/D3)

1 to 100

–1000 to 1000

–100 to 1005 to 1000

25 to 5000–5000 to 5000

mmH2O(/D4)

10 to 1000–1000 to 1000

50 to 10000–10000 to 100000.025 to 5 kgf/cm2

T01E.EPS

� PERFORMANCE SPECIFICATIONSZero-based calibrated span, linear output, wettedparts material code S and silicone oil, unless other-wise mentioned.For Fieldbus communication type, use calibratedrange instead of span in the following specifications.

Specification ConformanceEJX series ensures specification conformance to atleast �3�.

Reference Accuracy of Calibrated Span(includes terminal-based linearity, hysteresis, andrepeatability)Measurement span

Referenceaccuracy

�0.04% of Span�(0.005�0.0049 URL/span)% of Span

T08E.EPS

XX � span

X � span

URL (upper range limit)

H

70 kPa (280 inH2O)500 kPa (2000 inH2O)

Measurement spanReferenceaccuracy


M

T02E.EPS

XX � span

X � span

URL (upper range limit)10 kPa (40 inH2O)

100 kPa (400 inH2O)

Measurement span

Referenceaccuracy


L

T03E.EPS

XX � span

X � span

URL (upper range limit)2 kPa (8 inH2O)

10 kPa (40 inH2O)

Square Root Output AccuracyThe square root accuracy is a percent of flow span.

Output Accuracy50% or Greater Same as reference accuracy

50% to Dropout point

T03E.EPS

Reference accuracy�50Square root output (%)

Ambient Temperature Effects per 28˚C (50˚F)Change

Capsule EffectH �(0.04% Span�0.0125% URL)M �(0.04% Span�0.009% URL)L �(0.055% Span�0.09% URL)

Static Pressure Effects per 6.9 MPa (1000 psi)Change

Span EffectsL, M and H capsules�0.075% of spanEffect on Zero

Capsule EffectH �0.028% URLM �0.02% URLL �0.05% URL

Overpressure EffectsOverpressure condition: up to maximum workingpressureM and H capsules�0.03% of URL

[Style: S2]



EJX430AGauge Pressure Transmitter


GS 01C25E01-01E

GS 01C25E01-01E©Copyright Feb. 20046th Edition Aug. 2005

The high performance gauge pressure transmitterEJX430A features single crystal silicon resonantsensor and is suitable to measure liquid, gas, orsteam pressure. The EJX430A outputs a 4 to 20 mADC signal corresponding to the measured pressure. Italso features quick response, remote setup andmonitoring via BRAIN or HART communications, andself-diagnostics. FOUNDATION Fieldbus protocol typeis also available.All EJX series models in their standard configuration,with the exception of the Fieldbus type, are certified byTÜV as complying with SIL 2 for safety requirement.


� SPAN AND RANGE LIMITSMeasurement Span/Range

H

A

B

2.5 to 500 kPa

– 0.1 to 3.5

–1 to 160

Span

Span

Span

Range

Range

Range

MPa

10 to 2000 inH2O–400 to 2000 inH2O

–14.5 to 5002.5 to 500

–100 to 500 kPa0.0175 to 3.5

0.08 to 16– 0.1 to 16

psi (/D1)

12 to 2300–14.5 to 2300

bar(/D3)

0.025 to 5

–1 to 35

–1 to 50.175 to 35

0.8 to 160–1 to 160

kgf/cm2(/D4)

0.025 to 5–1 to 5

0.175 to 35–1 to 35

0.8 to 160

T01E.EPS

� PERFORMANCE SPECIFICATIONSZero-based calibrated span, linear output, wettedparts material code ʻSʼ and silicone oil, unlessotherwise mentioned.For Fieldbus communication type, use calibratedrange instead of span in the following specifications.


Reference Accuracy of Calibrated Span(includes the effects of terminal-based linearity,hysteresis, and repeatability)

Measurement span

Referenceaccuracy

�0.04% of Span

�(0.005�0.0049 URL/Span)% of Span

H

T03E.EPS

XX � span

X � span

URL (upper range limit)70 kPa (280inH2O)

500 kPa (2000inH2O)

Measurement span

Referenceaccuracy

�0.04% of Span

�(0.005�0.0035 URL/Span)% of Span

T02E.EPS

X

X � span

X � span

URL (upper range limit)

A

0.35 MPa(50 psi)

1.6 MPa(230 psi)

3.5 MPa(500 psi)

16 MPa(2300 psi)

B


Capsule EffectH �(0.04% Span�0.0125% URL)A, B �(0.04% Span�0.009% URL)

Stability (All normal operating condition)�0.1% of URL per 10 years

Power Supply Effects (Output signal code D and E)�0.005% per Volt (from 21.6 to 32 V DC, 350 �)

Vibration EffectsAmplifier housing code 1:Less than 0.1% of URL when tested per the require-ments of IEC60770-1 field or pipeline with highvibration level (10-60 Hz, 0.21 mm peak to peakdisplacement/60-2000 Hz 3 g)Amplifier housing code 2:Less than ±0.1% of URL when tested per therequirements of IEC60770-1 field with generalapplication or pipeline with low vibration level (10-60Hz 0.15mm peak to peak displacement /60-500 Hz2g)

Mounting Position EffectsRotation in diaphragm plane has no effect. Tilting upto 90 degree will cause zero shift up to 0.4 kPa (1.6inH2O) which can be corrected by the zero adjust-ment.

Response Time (All capsules) “�”90 msecWhen software damping is set to zero and includingdead time of 45 msec (nominal)

� FUNCTIONAL SPECIFICATIONSOutput “�”

Two wire 4 to 20 mA DC output with digital communi-cations, linear or square root programmable. BRAINor HART FSK protocol are superimposed on the 4 to20 mA signal.



EJX510A and EJX530AAbsolute and Gauge PressureTransmitter


GS 01C25F01-01E

GS 01C25F01-01E©Copyright Jun. 20046th Edition Aug. 2005

The high performance absolute and gauge pressuretransmitter EJX510A and EJX530A feature singlecrystal silicon resonant sensor and are suitable tomeasure liquid, gas, or steam pressure. EJX510A andEJX530A output a 4 to 20 mA DC signal correspond-ing to the measured pressure. It also features quickresponse, remote setup and monitoring via BRAIN orHART communications, self-diagnostics, and optionalstatus output for pressure high/low alarm. FOUNDA-TION Fieldbus protocol type is also available.All EJX series models in their standard configuration,with the exception of the Fieldbus type, are certified byTÜV as complying with SIL 2 for safety requirement.


� SPAN AND RANGE LIMITS(For EJX510A, values are in absolute and lowerrange limits are 0.)

T01E.EPS

Span

SpanRange

Range

Range

RangeSpan

–1 to 20

1 to 50–1 to 1002 to 100

0.4 to 20

145 to 7200 10 to 500

8 to 200 kPa

–0.1 to 10

–0.1 to 20.04 to 2

–100 to 200 kPa

–14.5 to 14500.2 to 10

1.16 to 29–14.5 to 295.8 to 290

–14.5 to 29029 to 1450

Span–1 to 2

10 to 500–1 to 500–14.5 to 7200–0.1 to 50 –1 to 500

2 to 100

–1 to 2

kgf/cm2 (/D4)

0.08 to 2

0.4 to 20–1 to 20

–1 to 100

MPaMeasurementSpan/Range psi (/D1)

A

D

0.08 to 2

bar (/D3)

C

B

� PERFORMANCE SPECIFICATIONSZero-based calibrated span, linear output, wettedparts material code ʻSʼ and silicone oil, unlessotherwise mentioned.For Fieldbus communication type, use calibratedrange instead of span in the following specifications.


Reference Accuracy of Calibrated Span(includes the effects of terminal-based linearity,hysteresis, and repeatability)

20 kPa(2.9 psi)

1 MPa(145 psi)

�0.1% of Span

0.2 MPa(29 psi)

DSpan � XSpan � X

Referenceaccuracy

10 MPa(1450 psi)

2 MPa(290 psi)

C

200 kPa(29 psi)

�(0.01+0.009 URL/Span) % of Span5 MPa

(720 psi)50 MPa

(7200 psi)

A

URL (Upper range limit)

Measurement span B

X

T02E.EPS


�(0.15% of Span + 0.15% of URL)Stability (All normal operating condition)

�0.1% of URL per 1 yearPower Supply Effects

�0.005% per Volt (from 21.6 to 32 V DC, 350 �)Vibration Effects

Amplifier housing code 1:Less than 0.1% of URL when tested per the require-ments of IEC60770-1 field or pipeline with highvibration level (10-60 Hz, 0.21 mm peak to peakdisplacement/60-2000 Hz 3 g)Amplifier housing code 2:Less than ±0.1% of URL when tested per therequirements of IEC60770-1 field with generalapplication or pipeline with low vibration level (10-60Hz 0.15mm peak to peak displacement /60-500 Hz2g)

Mounting Position EffectsRotation in diaphragm plane has no effect. Tilting upto 90 degree will cause zero shift up to 0.21 kPa(0.84 inH2O) which can be corrected by the zeroadjustment.

Response Time (All capsules) “�”90 msecWhen software damping is set to zero and includingdead time of 45 msec (nominal)



Model EJA110ADifferential Pressure Transmitter


GS 01C21B01-00E

GS 01C21B01-00E©Copyright June 199720th Edition Jan. 2005

The high performance differential pressure transmittermodel EJA110A can be used to measure liquid, gas,or steam flow as well as liquid level, density andpressure. It outputs a 4 to 20 mA DC signal corre-sponding to the measured differential pressure. ModelEJA110A also features remote setup and monitoringthrough communications with the BRAIN™ terminaland CENTUM CS™ or �XL™ or HART® 275 host.


� PERFORMANCE SPECIFICATIONSZero-based calibrated span, linear output, wettedparts material code ʻSʼ and silicone oil.

Reference Accuracy of Calibrated Span(including the effects of zero-based linearity, hyster-esis, and repeatability)

�0.075 % of Span

For spans below X

�[0.025 + 0.05 ] % of SpanXSpan

where X equals:Capsule X kPa {inH2O}L 3 {12}M 10 {40}H 100 {400}V 1.4 MPa {200 psi}

Square Root Output AccuracyThe square root accuracy is a percent of flow span.

Output Accuracy

50 % or Greater same as referenceaccuracy

50 % to Dropout point reference accuracy�50square root output (%)

T00E.EPS

Ambient Temperature EffectsTotal Effects per 28 ˚C (50 ˚F) Change

Capsule EffectL �[0.08 % Span + 0.09 % URL]M �[0.07 % Span + 0.02 % URL]H �[0.07 % Span + 0.015 % URL]V �[0.07 % Span + 0.03 % URL]

Static Pressure EffectsTotal Effects per ChangeL capsule�[0.07 % Span+0.052 % URL] per 3.4 MPa {500 psi}M, H and V capsules�[0.1% Span+0.028 % URL] per 6.9 MPa {1000 psi}

Effect on Zero (can be corrected at line pres-sure)L capsule�[0.02 % Span+0.052 % URL] per 3.4 MPa {500 psi}

M, H and V capsules�0.028 % of URL per 6.9 MPa {1000 psi}

Overpressure Effects (M, H and V capsules)�0.03 % of URL per 16 MPa {2300 psi}

Stability (M, H and V capsules)�0.1 % of URL per 60 months

Power Supply Effects “�”�0.005 % per Volt (from 21.6 to 32 V DC, 350 �)

� FUNCTIONAL SPECIFICATIONSSpan & Range LimitsMeasurement Span/Range

L

M

H

0.5 to 10

-100 to 100

-5 to 5 kgf/cm2

Span

Span

Span

Range

Range

Range

kPa

2 to 40-40 to 40

-400 to 4004 to 400

-10 to 101 to 100

5 to 500-500 to 500

inH2O(/D1)

20 to 2000-2000 to 2000

mbar(/D3)

5 to 100

-1000 to 1000

-100 to 10010 to 1000

50 to 5000-5000 to 5000

mmH2O(/D4)

50 to 1000-1000 to 1000100 to 10000

-10000 to 100000.05 to 5 kgf/cm2

T01E.EPS

V*1SpanRange -5 to 140 kgf/cm2

0.14 to 14 MPa-0.5 to 14 MPa

20 to 2000 psi-71 to 2000 psi

1.4 to 140 bar-5 to 140 bar

1.4 to 140 kgf/cm2

*1: For Wetted parts material code other than S, theranges are 0 to 14 MPa, 0 to 2000 psi, 0 to 140bar, and 0 to 140 kgf/cm2.

URL is defined as the Upper Range Limit from the tableabove.

Zero Adjustment LimitsZero can be fully elevated or suppressed, within theLower and Upper Range Limits of the capsule.

External Zero Adjustment “�”External zero is continuously adjustable with 0.01 %incremental resolution of span. Span may beadjusted locally using the digital indicator with rangeswitch.



The high performance gauge pressure transmittermodel EJA430A can be used to measure liquid, gas,or steam pressure. It outputs a 4 to 20 mA DC signalcorresponding to the measured gauge pressure.Model EJA430A also features remote setup andmonitoring through communications with the BRAIN™terminal and CENTUM CS™ or �XL™ or HART® 275host.




�0.075 % of Span

For spans below X,

�[0.025 + 0.05 ] % of SpanXSpan

where X equals:Capsule X MPa {psi}A 0.3 {43}B 1.4 {200}

Ambient Temperature EffectsTotal Effects per 28 �C (50 �F) Change

�[0.084 % Span + 0.017 % URL]Stability

�0.1 % of URL per 60 monthsPower Supply Effects “�”

�0.005 % per Volt (from 21.6 to 32 V DC, 350 �)

� FUNCTIONAL SPECIFICATIONSSpan & Range Limits

A

B

MeasurementSpan and Range

SpanRangeSpanRange

psi (/D1)

4.3 to 430-15 to 43020 to 2000-15 to 2000

bar (/D3)

0.3 to 30

kgf/cm2(/D4)

0.3 to 30-1 to 30

1.4 to 140

-1 to 140

-1 to 301.4 to 140-1 to 140

MPa

0.03 to 3

-0.1 to 30.14 to 14-0.1 to 14

T01E.EPSURL is defined as the Upper Range Limit from thetable above.



Mounting Position EffectRotation in diaphragm plane has no effect. Tilting up to90 � will cause zero shift up to 0.4 kPa {1.6 inH2O}which can be corrected by the zero adjustment.

Output “�”Two wire 4 to 20 mA DC output with digital communi-cations. BRAIN or HART FSK protocol are superim-posed on the 4 to 20 mA signal.

Failure AlarmOutput status at CPU failure and hardware error;

Up-scale: 110%, 21.6 mA DC or more(standard)Down-scale: -5%, 3.2 mA DC or lessNote: Applicable for Output signal code D and E

Damping Time Constant (1st order)The sum of the amplifier and capsule damping timeconstant must be used for the overall time constant.Amp damping time constant is adjustable from 0.2 to64 seconds.

Capsule (Silicone Oil) A BTime Constant (approx. sec) 0.2 0.2

Ambient Temperature Limits(approval codes may affect limits)

-40 to 85 �C (-40 to 185 �F)-30 to 80 �C (-22 to 176 �F) with LCD Display

Model EJA430AGauge Pressure Transmitter


GS 01C21E01-00E

GS 01C21E01-00E©Copyright June 199718th Edition Jan. 2005



The absolute and gauge pressure transmitter modelEJA510A and EJA530A can be used to measureliquid, gas, or steam pressure. Both output a 4 to 20mA DC signal corresponding to the measured pres-sure, and also feature remote setup and monitoringthrough communications with the BRAIN™ terminaland CENTUM CS™ or µXL™ or HART® 275 host.

� STANDARD SPECIFICATIONSRefer to GS 01C22T02-00E for Fieldbuscommunication type marked with “�”.


Reference Accuracy of Calibrated Span(including the effects of zero-based linearity, hyster-esis, and repeatability, values are in absolute forEJA510A)�0.2 % of Span

�0.075 % of Span, when/ HAC is specified(EJA530A: A, B and C capsule)

�0.12 % of Span, when/ HAC is specified(EJA530A: D capsule)

For spans below X,

�[0.05�0.15 ] % of Span

�[0.025�0.05 ] % of span, when/ HAC is

specified (EJA530A: A, B and C capsule)

�[0.03�0.09 ] % of span, when/ HAC is

specified (EJA530A: D capsule)

XSpan

XSpan

XSpan

Where X equals:Capsule X MPa {psi}A 20 kPa {2.9}A with/ HAC 40 kPa {5.8}B 0.2 {29}C 1 {145}D 8 {1160}

Ambient Temperature EffectsTotal Effects per 28 �C (50 �F) Change

�[0.15% Span � 0.15% URL]Stability

�0.1% of URL per 12 monthsVibration Effects

�0.1 % of URL(5 to 15Hz; 4mm peak-to-peak constant displace-ment, 15 to 150Hz; 2g, 150 to 2000Hz; 1g)

Model EJA510A and EJA530AAbsolute and Gauge PressureTransmitters

Yokogawa Electric Corporation2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 JapanPhone: 81-422-52-5690 Fax.: 81-422-52-2018

GS 01C21F01-00E

GS 01C21F01-00E©Copyright Apr. 1999

15th Edition Jan. 2005


� FUNCTIONAL SPECIFICATIONSSpan & Range Limits(Values are in absolute for EJA510A)

A

B

MeasurementSpan and

RangeSpan

Range

SpanRange

psi (/D1)

1.45 to 29

0 to 29

14.5 to 2900 to 290

bar (/D3)

0.1 to 2

kgf/cm2(/D4)

0.1 to 2

0 to 2

1 to 200 to 20

0 to 2

1 to 200 to 20

MPa

10 to 200kPa

0 to 200kPa

0.1 to 20 to 2

72.5 to 14500.5 to 10

0 to 10C

SpanRange 0 to 1450

5 to 1000 to 100

5 to 1000 to 100

720 to 72005 to 50

0 to 50D

SpanRange 0 to 7200

50 to 5000 to 500

50 to 5000 to 500

T01E.EPS

URL is defined as the Upper Range Limit from thetable above.



Mounting Position EffectRotation in diaphragm plane has no effect. Tilting upto 90� will cause zero shift up to 0.27 kPa {1.1 inH2O}which can be corrected by the zero adjustment.

Output “�”Two wire 4 to 20 mA DC output with digital communi-cations. BRAIN or HART FSK protocol are superim-posed on the 4 to 20 mA signal.

[Style: S2]



The high performance gauge pressure transmittermodel EJA310A can be used to measure liquid, gas,or steam pressure. It outputs a 4 to 20 mA DC signalcorresponding to the measured absolute pressure.Model EJA310A also features remote setup andmonitoring through communications with the BRAIN™terminal and CENTUM-CS™ or �XL™ or HART® 275host.




±0.15 % of Span or±0.20 % of Span for L Capsule

±0.075 % of Span when /HAC is specified.

For spans below X,

�[0.1 + 0.05 ] % of Span or

�[0.15 + 0.05 ] % of Span for the LCapsule

�[0.025 + 0.05 ] % of Span when/HAC isspecified.

XSpan

XSpan

XSpan

where X equals:Capsule X kPa {psi}L 5.4 {22 inH2O}M 21.8 {3.2}A 250 {36}

Ambient Temperature EffectsTotal Effects per 28 ˚C (50 ˚F) Change

Capsule EffectL �[0.095 % Span + 0.118 % URL]M �[0.084 % Span + 0.028 % URL]A �[0.080 % Span + 0.008 % URL]


� FUNCTIONAL SPECIFICATIONSSpan & Range Limits

(Units are in absolute terms.)

L

M

A

MeasurementSpan and Range

SpanRangeSpan

RangeSpan

Range

psi(/D1)

0.2 to 2.95 inHg

0 to 2.95 inHg0.38 to 38 inHg

0 to 38 inHg4.3 to 4300 to 430

mbar(/D3)

6.7 to 100

mmHg(/D4)

5 to 75

0 to 100

13 to 1300

0 to 13000.3 to 30 bar

0 to 30 bar

0 to 75

9.6 to 960

0 to 9600.3 to 30 kgf/cm2

0 to 30 kgf/cm2

MPa

0.67 to 10 kPa

0 to 10 kPa1.3 to 130 kPa

0 to 130 kPa0.03 to 3

0 to 3T01E.EPS

URL is defined as the Upper Range Limit from thetable above.

Minimum Input Pressure at CalibrationL capsule: 130 Pa abs. {1 mmHg abs.}M and A capsules: 2.7 kPa abs. {20 mmHg abs.}

At range calibrating testing, minimum input pressureof 130 Pa abs. {1 mmHg abs.} is obtained byselecting Optional code S1. Always select S1 for Mcapsule with higher range value(HRV) not exceeding3.4 kPa abs. {25 mmHg abs.}



Mounting Position EffectRotation in diaphragm plane has no effect. Tilting up to90 ˚ will cause zero shift up to 0.4 kPa {1.6 inH2O}which can be corrected by the zero adjustment.

Model EJA310AAbsolute Pressure Transmitter

Yokogawa Electric Corporation2-9-32 Nakacho, Musashino-shi, Tokyo, 180-8750 JapanPhone: 81-422-52-5690 Fax: 81-422-52-2018

GS 01C21D01-00E

GS 01C21D01-00E©Copyright June 199717th Edition Jan. 2005

GS 07R01Y01-E-E



EJX910AMultivariable Transmitter


GS 01C25R01-01E

GS 01C25R01-01E©Copyright Mar. 20056th Edition Aug. 2006

The high performance EJX910A multivariable transmit-ter features a single-crystal silicon resonant sensorand is suitable to measure liquid, gas, or steam massflow. The EJX910A outputs a 4 to 20 mA DC signalcorresponding to the measured differential pressure,static pressure, process temperature, or dynamicallycalculated and fully compensated mass flow.FOUNDATION fieldbus protocol type is also available.

Key features:• 1.0% mass flow rate accuracy over 1:10 flow range[HART protocol type]• Siumultaneous dual output of 4 to 20mA and pulse

signals.[FOUNDATION Fieldbus protocol type]• Various function blocks available; 5 AIs, AR, IT, SC,

and IS as standard. PID as an optional feature.• Software download function(option)

�STANDARD SPECIFICATIONSSPAN AND RANGE LIMITSDifferential Pressure (DP)

T01E.EPS

50 to 10000–10000 to 10000

0.025 to 5 kgf/cm2

–5 to 5 kgf/cm2

5 to 1000–1000 to 1000

25 to 5000–5000 to 5000

2 to 400–400 to 40010 to 2000

–2000 to 2000

0.5 to 100–100 to 1002.5 to 500

–500 to 500

SpanRangeSpanRange

mmH2O(/D4)mbar(/D3)inH2O(/D1)kPa

H

M

10 to 1000–1000 to 1000

1 to 100–100 to 100

0.4 to 40–40 to 40

0.1 to 10–10 to 10

SpanRangeL

Measurement Span/Range

Static Pressure (SP)Absolute Pressure

T02E.EPS

10 to 2500 to 250

10 to 2500 to 250

145 to 36000 to 3600

1 to 250 to 25

SpanRange

kgf/cm2 abs(D4)bar abs(D3)psia(/D1)MPa abs

MH

10 to 1600 to 160

10 to 1600 to 160

145 to 23000 to 2300

1 to 160 to 16

SpanRange

L


Gauge Pressure (Sealed gauge)

T03E.EPS

10 to 250–1 to 250

10 to 250–1 to 250

145 to 3600–14.5 to 3600

1 to 25– 0.1 to 25

SpanRange

kgf/cm2(D4)bar(/D3)psi(/D1)MPa

MH

10 to 160–1 to 160

10 to 160–1 to 160

145 to 2300–14.5 to 2300

1 to 16– 0.1 to 16

SpanRange

L


External Temperature (ET) (PT100 ohm)

T04E.EPS

10 to 105073 to 11230 to 2200

18 to 1890–328 to 1562–459 to 3500

10 to 1050–200 to 850

–273 to 1927

LMH

SpanRangeFixed Temperature

K°F°CMeasurement ExternalTemperature Span/Range

� PERFORMANCE SPECIFICATIONZero-based calibrated span output, wetted partsmaterial code S and silicone oil, unless otherwisementioned.For Fieldbus communication type, use calibratedrange instead of span in the following specifications.

Specification ConformanceEJX series ensures specification conformance to atleast ±3 .

Mass Flow (For Measurement Function Code B)Mass Flow Reference Accuracy±1.0% of Mass Flow Rate over 10:1 flow range. (100:1 DP range) for liquids and gases.

Totalized Mass Flow Reference Accuracy1.0% of Total Mass Flow.

Note: Assume 100:1 DP range for liquids and gases.

Conditions for mass flow accuracy(1) Auto compensation mode.(2) Uncalibrated differential producer (Orifice)

installed based on the following standards. *1(3) Uncertainties for discharge coefficient, primary

device bore, pipe diameter, and gas expansionfactor defined on following standards. *1

(4) Density uncertainty less than 0.1%.(5) Differential pressure spanned at up to 1/10th full

scale with DP trimmed for optimum flowaccuracy/rangeability.

*1: Standards: ISO5167-1 1991, ISO5167-2 2003,ASME, MFC-3M 1989, AGA No.3 1992

3

EJX110A GS01C25B01-01EEJX910A GS01C25R01-01EEJX430A GS01C25E01-01EEJX510A, EJX530A GS01C25F01-01EEJA110A GS01C21B01-00EEJA120A GS01C21B03-00E

EJA130A GS01C21B03-00EEJA310A GS01C21D01-00EEJA430A GS01C21E01-00EEJA440A GS01C21E02-00EEJA510A, EJA530A GS01C21F01-00E

Manifold product overview

GS 07R01Y01-E-E

For details, please refer to the following GS for each product:

FOR MATERIAL AND PROCESS SPECIFICATIONS REFER TO GENRIC PROCESS CONTROL SHEET ESSFFOR PART MARKING DETAILS REFER TO PART MARKING SPECIFICATION ESSFTHIS DRAWING CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETRY TO PARKER HANNIFIN PLC. THIS DRAWING IS FURNISHED ON THE UNDERSTANDING THAT THE DRAWING AND THE INFORMATION IT CONTAINS WILL NOT BE COPIED OR DISCLOSED TO OTHERS EXCEPT WITH THEWRITTEN CONSENT OF PARKER HANNIFIN.WILL NOT BE USED TO THE DETRIMENT OF PARKER HANNIFIN,AND WILL BE RETURNED UPON REQUESTBY PARKER HANNIFIN.

ISSUE NO.

E.C.N NUMBER

DATE

DRAWN BY:

DATE DRAWN

SCALE PROPORTIONAL

ALL DIMENSIONS IN MM [INCHES] UNLESS OTHERWISE STATED

DRAWING TITLE :

DRAWING LOCATED IN PDM SYSTEM

REMOVE ALL SHARP EDGES AND BURRSINCH METRIC ANGULAR

(.00") .015"(.000") .005"

(.0)mm .3mm

(.00mm) 0.1mm1/230

DO NOT SCALE IF IN DOUBT ASK

UNLESS STATED3rd ANGLE

PROJECTION

CHECKED BY :

APPROVED BY:

InstrumentationParker Hannifin plcInstrumentation Products DivisionRiverside RoadBarnstaple.Devon EX31 1NP

Approvals using electronicʼPDM WORKFLOWʼ (QSP05/25)


1

22/05/2002

NICK HOLTON

22/05/2002

N/AN/A

HD*2HLH

CUST

2 VALVE MANIFOLD DIRECT MTGPIPE TO FLANGE

1/2-14 NPT (FEM) INLET1/4-18 NPT (FEM) VENT

BASE VENTED6000 PSI RANGE

CUSTOMER ASSEMBLY DRAWING

2 VALVE MANIFOLD DIRECT MTGINLET : 1/2-14 NPT (FEM)VENT : 1/4-18 NPT (FEM)MATERIAL OF CONSTRUCTION : SEE ʼH-SERIES MATERIAL SPECʼ.

63.5[2.500]

113.0[4.449]

(OPEN REF.)

63.5[2.500]

114.3 [4.500] (OPEN REF.)111.3 [4.382] (CLOSED REF.)

28.6[1.125]

M10 x 1.5pMTG HOLES

2 OFF 12.0 [0.472]MTG HOLES

M6 x 1.0pMTG HOLES1/4-18 NPT

(FEM) VENT

1/2-14 NPT(FEM) INLET

41.3[1.625]

24.0[0.945]

8.3[0.326]


ISSUE NO.

E.C.N NUMBER

DATE

DRAWN BY:

DATE DRAWN

SCALE PROPORTIONAL


DRAWING TITLE :



(.00") .015"(.000") .005"

(.0)mm .3mm

(.00mm) 0.1mm1/230



PROJECTION

CHECKED BY :

APPROVED BY:




1

22/05/2002

NICK HOLTON

22/05/2002

N/AN/A

HD*5M

CUST

5 VALVE MANIFOLD DIRECT MTGPIPE TO FLANGE

1/2-14 NPT (FEM) INLETS1/4-18 NPT (FEM) VENTS

BASE VENTED6000 PSI RANGE


5 VALVE MANIFOLD DIRECT MTGINLETS : 1/2-14 NPT (FEM)VENTS : 1/4-18 NPT (FEM)MATERIAL OF CONSTRUCTION : SEE ʼH-SERIES MATERIAL SPECʼ.


113.0[4.449]

(OPEN REF.)63.5

[2.500]

28.6[1.125]

54.0[2.125]

138.0[5.433]

41.3[1.625]

30.0[1.181]

2 OFF 1/2-14 NPT(FEM) INLETS 4 OFF 12.0 [0.472]

MTG. HOLES

2 OFF 1/4-18 NPT(FEM) VENTS

2 OFF M10 x 1.5pMTG. HOLES

102.0[4.016]


ISSUE NO.

E.C.N NUMBER

DATE

DRAWN BY:

DATE DRAWN

SCALE PROPORTIONAL


DRAWING TITLE :



(.00") .015"(.000") .005"

(.0)mm .3mm

(.00mm) 0.1mm1/230



PROJECTION

CHECKED BY :

APPROVED BY:




1

22/05/2002

NICK HOLTON

22/05/2002

N/AN/A

HL*2V

CUST

2 VALVE MANIFOLD REMOTE MTGPIPE TO PIPE

1/2-14 NPT (FEM) INLET/OUTLET1/4-18 NPT (FEM) VENT

6000 PSI RANGECUSTOMER ASSEMBLY DRAWING

2 VALVE MANIFOLD REMOTE MTG INLET : 1/2-14 NPT (FEM)OUTLET : 1/2-14 NPT (FEM)VENT : 1/4-18 NPT (FEM)MATERIAL OF CONSTRUCTION : SEE ʼH-SERIES MATERIAL SPECʼ.

50.8[2.000]

152.4 [6.000](OPEN REF.)146.4 [5.764]

(CLOSED REF.)

63.5[2.500]

28.6[1.125]

2 OFF 5.5 [0.216]MTG. HOLES

1/2-14 NPT(FEM) OUTLET


1/4-18 NPT(FEM) VENT

30.0[1.181]

10.4[0.409]


ISSUE NO.

E.C.N NUMBER

DATE

DRAWN BY:

DATE DRAWN

SCALE PROPORTIONAL


DRAWING TITLE :



(.00") .015"(.000") .005"

(.0)mm .3mm

(.00mm) 0.1mm1/230



PROJECTION

CHECKED BY :

APPROVED BY:




1

22/05/2002

NICK HOLTON

22/05/2002

N/AN/A

HL*5M

CUST

5 VALVE MANIFOLD REMOTE MTGPIPE TO PIPE

1/2-14 NPT (FEM) INLET/OUTLET1/4-18 NPT (FEM) VENT

6000 PSI RANGECUSTOMER ASSEMBLY DRAWING

5 VALVE MANIFOLD REMOTE MTGINLETS : 1/2-14 NPT (FEM)OUTLETS : 1/2-18 NPT (FEM)VENTS : 1.4-18 NPT (FEM)MATERIAL OF CONSTRUCTION : SEE ʼH-SERIES MATERIAL SPECʼ.

63.5[2.500]

28.6[1.125]

79.0 [3.110](OPEN REF.)


120.0[4.724]

2 OFF 1/2-14 NPT(FEM) INLETS



2 OFF 1/2-14 NPT(FEM) OUTLETS

54.0[2.126]

47.6[1.875]

88.0[3.465]

(MAX REF.)

82.0[3.228]

HBSN2FM HLS2V HDS2HLH HDS3M

HDS5M HLS3M HLS5M


IsolateIsolate






316SS

Part No: HDS5M



Key features (example with a 5 valve manifold)

GS 07R01Y01-E-E

4


IsolateIsolate

Instrument side, outlet, flange connections: are standard for directmount manifolds with machined grooves for PTFE seal rings. DIN sealinggroove arrangement is also available on request. Remote style manifolds areprovided as standard with 1/2” NPT female outlet connections (alternativethread forms etc. are available). Flanged outlets are positioned on54mm/2.125” centres. (56/57mm centres are available on request).

Pressure rating:maximum standard rating6000psig (414 barg).Remote mount10,000psig (689 barg) areavailable

Manifold to transmitter mounting: alldirect mount manifolds are provided with4 off 7/16 UNF x 1.625” high tensile zincplated carbon steel bolts. Bolt holes arestandard on 54mm/2.125” centres.Optional St. St. bolts are available.

Manifold base/bracket mounting:

instrument allowing installation to take place without the

all manifolds areprovided with bracket mounting holes. This provides theuser with the opportunity to bracket mount the

instrument and to give full mounting support in theevent of Instrument removal.

Material: Products in this GS arestandard in stainless steel but can also beproduced in many other materials.

6

2 valve Manifold Block and Bleed HBSN2 for DPHarp EJA/EJX 510A/530A series

Model and Suffix codes HBSN2

Model Suffixcode DescriptionHBSN2 Instrument Block and Bleed Manifold

for DPHarp EJA/EJX 510A/530A series FM HBSNVS28F8M4FHPP Manifold type 2 valves 316SS 1/2”NPT F inlet

(select EJA/X500 1/2”NPT M) 1/2” NPT M outlet FF HBSNVS28F8F4FHPP Manifold type 2 valves 316SS 1/2”NPT F inlet

(select EJA/X500 1/2”NPT M) 1/2” NPT F outlet MF HBSNVS28M8F4FHPP Manifold type 2 valves 316SS 1/2”NPT M inlet

(select EJA/X500 1/2”NPT F) 1/2” NPT F outlet MM HBSNVS28M8M4FHPP Manifold type 2 valves 316SS 1/2”NPT M inlet

(select EJA/X500 1/2”NPT F) 1/2” NPT M outletOptions /NC Sour Gas Service /PP Plugged Vent Port /MOUNTTF Assembly on Transmitter (free issue) with Teflon /MOUNTLOC Assembly on Transmitter (free issue) with Loctite /T Tested at 6 bar (dry air) during 1 min.

GS 07R01Y01-E-E

133.4 [5.25](OPEN REF.)127.4 [5.02]

(CLOSED REF.)

2 VALVE MANIFOLD REMOTE MTGINLET : 1/ 2- 14 NPT (MALE)OUTLET : 1/ 2- 14 NPT (FEM)VENT : 1/ 4- 18 NPT (FEM)MATERIAL OF CONSTRUCTION :SEE ʼH- SERIES MATERIAL SPECʼ.

95.4[3.76]

136.7[5.38]

31.8[1.25]

31.8[1.25]

1/2-14 (MALE)INLET

1/4-18 NPTPLUG

1/2-14 NPT (FEM)OUTLET

Drawing HBSN2MF

7

Manifold Remote Mount for DPHarp EJA/EJX series

Model and Suffix codes HLS

Model Suffix Codes DescriptionHLS Manifold Remote Mount for DPHarp EJA/EJX series 2V 2 valves 316SS for DPHarp EJA/EJX510A - 530A 3M 3 valves 316SS for DPHarp EJA/EJX110A - 130A 5M 5 valves 316SS for DPHarp EJA/EJX110A - 130A Options /NC Sour Gas Service /MTG (always included) Tapped Mounting Holes /BRKC Carbon steel Mounting Bracket /BRKS Stainless steel Mounting Bracket /SSB Stainless steel Mounting Bolts /OXY Oxygen clean service /PP Plugged Vent Port (for HLS2V manifold) /MOUNTTF Assembly on EJA/EJX510A - 530A Transmitter with Teflon /MOUNTLOC Assembly on EJA/EJX510A - 530A Transmitter with Loctite /T Tested at 6 bar (dry air) during 1 min.

GS 07R01Y01-E-E

2 VALVE MANIFOLD REMOTE MTGINLET : 1/2-14 NPT (FEM)OUTLET : 1/2-14 NPT (FEM)VENT : 1/4-18 NPT (FEM)MATERIAL OF CONSTRUCTION :SEE ʼH-SERIES MATERIAL SPECʼ.

50.8[2.000]

152.4 [6.000](OPEN REF.)146.4 [5.764]

(CLOSED REF.)

63.5[2.500]

28.6[1.125]


1/2-14 NPT(FEM) OUTLET


1/4-18 NPT(FEM) VENT

30.0[1.181]

10.4[0.409]

Drawing HLS2V

8

GS 07R01Y01-E-E

5 VALVE MANIFOLD REMOTE MTGINLETS : 1/2-14 NPT (FEM)OUTLETS : 1/2-18 NPT (FEM)VENTS : 1.4-18 NPT (FEM)MATERIAL OF CONSTRUCTION :SEE ʼH-SERIES MATERIAL SPECʼ.

63.5[2.500]

28.6[1.125]

79.0 [3.110](OPEN REF.)


120.0[4.724]

2 OFF 1/2-14 NPT(FEM) INLETS


FF 1/4-18 NPT(FEM) VENTS

2 OFF 1/2-14 NPT(FEM) OUTLETS

54.0[2.126]

47.6875]

88.0[3.465]

(MAX REF.)

82.0[3.228]

120.0[4.724]

63.5[2.500]

28.6[1.125]

88.0[3.465]

(MAX REF.)



2 OFF 1/2-14 NPT(FEM) INLET

1/2-14 NPT(FEM) OUTLET2 OFF


54.0[2.126]

47.6[1.875]

Drawing HLS3M

Drawing HLS5M

9

GS 07R01Y01-E-E

Manifold Direct Mount for DPHarp EJA/EJX series

Model and Suffix codes HDS

Model Suffix Codes DescriptionHDS Manifold Direct Mount for DPHarp EJA/EJX100 series 2HLH 2 valves 316SS for DPHarp EJA/EJX 310A - 430A 3M 3 valves 316SS for DPHarp EJA/EJX 110A - 130A 5M 5 valves 316SS for DPHarp EJA/EJX 110A - 130A Options /NC Sour Gas Service /MTG (always included) Tapped Mounting Holes /BRKC Carbon steel Mounting Bracket /BRKS Stainless steel Mounting Bracket /SSB STSTL Mounting Bolts /MOUNT Manifold Assembly - free issue EJA/EJX /T Tested at 6 bar (dry air) during 1 min. /OXY Oxygen clean service /PP Plugged Vent Port (for HDS2HLH manifold)

2 VALVE MANIFOLD DIRECT MTGINLET : 1/2-14 NPT (FEM)VENT : 1/4-18 NPT (FEM)MATERIAL OF CONSTRUCTION :SEE ʼH-SERIES MATERIAL SPECʼ.

63.5[2.500]

113.0[4.449]

(OPEN REF.)

63.5[2.500]


28.6[1.125]

M10 x 1.5pMTG HOLES


M6 x 1.0pMTG HOLES1/4-18 NPT

(FEM) VENT


41.3[1.625]

24.0[0.945]

8.3[0.326]

Drawing HDS2HLH

10

GS 07R01Y01-E-E

FOR MATERIAL AND PROCESS SPECIFICATIONS REFER TO GENRIC PROCESS CONTROL SHEET ESSFFOR PART MARKING DETAILS REFER TO PART MARKING SPECIFICATION ESSFTHIS DRAWING CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETRY TO PARKER HANNIFIN PLC. THIS DRAWING IS FURNISHED ON THEUNDERSTANDING THAT THE DRAWING AND THE INFORMATION IT CONTAINS WILL NOT BE COPIED OR DISCLOSED TO OTHERS EXCEPT WITH THEWRITTEN CONSENT OF PARKER HANNIFIN.WILL NOT BE USED TO THE DETRIMENT OF PARKER HANNIFIN,AND WILL BE RETURNED UPON REQUESTBY PARKER HANNIFIN.

ISSUE NO.

E.C.N NUMBER

DATE

DRAWN BY:

DATE DRAWN

SCALE PROPORTIONAL


DRAWING TITLE :



(.00") .015"(.000") .005"

(.0)mm .3mm

(.00mm) 0.1mm1/230



PROJECTION

CHECKED BY :

APPROVED BY:




1

22/05/2002

NICK HOLTON

22/05/2002

N/AN/A

HD*3M

CUST

3 VALVE MANIFOLD DIRECT MTG.PIPE TO FLANGE

1/2-14 NPT (FEM) INLETS6000 PSI RANGE


3 VALVE MANIFOLD DIRECT MTG.INLETS : 1/2-14 NPT (FEM)MATERIAL OF CONSTRUCTION :SEE ʼH-SERIES MATERIAL SPECʼ.

28.6[1.125]

110.0[4.331]


2 OFF M10 x 1.5pMTG HOLES


54.0[2.125]

41.3[1.625]

113.0[4.449]

(OPEN REF)

63.5[2.500]

2 OFF 1/2-14 NPT(FEM) INLET

30.0[1.181]

5 VALVE MANIFOLD DIRECT MTGINLETS : 1/2-14 NPT (FEM)VENTS : 1/4-18 NPT (FEM)MATERIAL OF CONSTRUCTION :SEE ʼH-SERIES MATERIAL SPECʼ.


113.0[4.449]

(OPEN REF.)63.5

[2.500]

28.6[1.125]

54.0[2.125]

138.0[5.433]

41.3[1.625]

30.0[1.181]

2 OFF 1/2-14 NPT(FEM) INLETS 4 OFF 12.0 [0.472]

MTG. HOLES


2 OFF M10 x 1.5pMTG. HOLES

102.0[4.016]

Drawing HDS5M

Drawing HDS3M

11

GS 07R01Y01-E-E

?????????????????????????????

???????????

???????????

???????????

????????????

???????????

???????????

???????????

????????????

???????????

???????????

30.0(1.18")

47.0(1.85") 2-O� Ø10.0

(0.41")Mtg. holes

69.5(2.74")90.0(3.54")

69.5(2.74")

69.5(2.74")

35.0(1.38")

145.0(5.71")

90.0(3.54")

10.0(0.39")4-O� Ø8.5

(0.34")Mtg. holes

?????????????????????????????

???????????

???????????

???????????

????????????

???????????

???????????

???????????

????????????

???????????

???????????

30.0(1.18")

47.0(1.85") 2-O� Ø10.0

(0.41")Mtg. holes

69.5(2.74")90.0(3.54")

69.5(2.74")

69.5(2.74")

35.0(1.38")

145.0(5.71")

90.0(3.54")

10.0(0.39")4-O� Ø8.5

(0.34")Mtg. holes

Mounting bracket for HLS2V modelSimple to install bracket for horizontal/vertical 2” standpipe, wall, panel or base mounting, bracket stand-off prevents handle obstruction.

Mounting bracket for HDS2HLH modelUniversal manifold mounting bracket suitable for all direct mount manifolds. This bracket design enables horizontal or vertical instrument positioning.

Manifold bracket supportPurposeIt is essential to fully support impulse/pressure measurement tubing lines, manifolds and instruments. All manifolds are designed to accommodate bracket mounting and support, a full range of brackets with additional U bolts are available.

Brackets are designed for panel and wall mounting and give full clearance for ease of handle operation. They are also suitable for vertical and horizontal positioning on 2” pipe-stand.

Brackets are produced from 4mm thick carbon steel plate to provide maximum rigidity and support. For full corrosion protection the brackets are shot blasted and zinc sprayed. Stainless Steel bracket are available in selecting Brks.

GS 07R01Y01-E-ESubject to change without notice Printed in The Netherlands, 01-802 (A) ICopyright©

YOKOGAWAYOKOGAWA EUROPE B.V.Databankweg 203821 AL AMERSFOORTThe NetherlandsTel. +31-33-4641 611Fax +31-33-4641 610www.yokogawa.com/eu

Yokogawa has an extensive sales and distribution network. Please refer to the European website (www.yokogawa.com/eu) to contact your nearest representative.

BKT3CS

BKT4CS

35.0(1.38”)

71.0(2.80”)

71.0(2.80”)90.0

(3.54”)

67.0(2.64”)

120.0(4.72”)71.0

(2.80”)

71.0(2.80”)90.0

(3.54”)

85mm(3.35")

145.0(5.71”)

10.0(0.39”)

Mounting bracket for HDS3M and HDS5M modelsSimple to install bracket on horizontal or vertical 2” standpipe. Designed for horizontal or vertical mounting of manifold giving total installation flexibility.

Mounting bracket for HLS3M and HLS5M modelsUniversal manifold mounting bracket suitable for all remote mount manifolds. This bracket allows 90 degree positioning enabling total installation flexibility and prevents handle obstruction. Can be wall, standpipe or base mounted.

BKT3CS

BKT4CS

35.0(1.38”)

71.0(2.80”)

71.0(2.80”)90.0

(3.54”)

67.0(2.64”)

120.0(4.72”)71.0

(2.80”)

71.0(2.80”)90.0

(3.54”)

85mm(3.35")

145.0(5.71”)

10.0(0.39”)

General Manifolds With DPHarp Specifications EJA and EJX ... · Contact your nearest Yokogawa...

Documents

Transcript of General Manifolds With DPHarp Specifications EJA and EJX ... · Contact your nearest Yokogawa...