General Catalogue Test, Measurement & Control Equipment › Promo › Pdf › MTP Catalogue...

www.mtpinc.com

General CatalogueTest, Measurement & Control Equipment

ABOUT THE TRESCAL GROUP

PROVIDING TAILORED SOLUTIONS TO MANAGE YOUR TEST & MEASUREMENT EQUIPMENT AND PROCESSES

Trescal is the global specialist in calibration services offering a unique ‘One Stop Shop’ for the worldwide test and measuring equipment market for:

> Calibration/Verification and Tests

> Repair/Maintenance

> Measurement management and acquisition systems

> Dynamic asset management and software solutions

> Engineering/Training/Support/Consultancy

For more information visit www.trescal.com

TRESCAL AROUND THE WORLD

> CAD 327,5 million dollars of total revenue (PF 2015)

> 2,300 employees

> 35,000 customers

> +85 calibration laboratories

> +450 accreditations

Voltage Testers & Multimeters | Page 4 to 8Voltage Detectors, Multimeters, GFI Receptacle Tester, Multifunction Tester, AC Voltage/Current Datalogger

Clamp-On Meters | Page 9 to 10Clamp Meters, Clamp-On Adaptors, Line Splitters

Preventive Maintenance | Page 11 to 15Power Quality Analyzer, Insulation Testers, Milli-Ohmmeter, Micro-Ohmmeter, Circuit Tracers, Breaker, Fault and Cable Locator, Ground Resistance Tester, Phase Sequence and Motor Detector, Tachometer

Calibrator and Power Supplies | Page 16 to 18Temperature Calibrators, Thermocouple Calibrator, Loop Calibrator, Voltage and Current Calibrator, Dry-Well Temperature Calibrator, Infrared Calibrator, Single and Dual Output Power Supplies

Temperature & Humidity | Page 19 to 22Infrared Thermometers, Thermal Imager, Dew Point Scanner, Temperature and RH Recorders, Thermo-Hygrometers, Moisture Meters

Environment Meters | Page 23 to 25Thermo-Anemometer, Hot-Wire Anemometer, Manometer, Sound Level Meter, Sound Level Calibrator, Light Meter, Carbon Monoxide Detector, Combustible Gas Leak Detector

Specialized Testers | Page 26 to 27Electricity Consumption Monitoring System, Laser Distance Meter, Multi-Function Tester, Refractometer, Lamp Tester

Video Inspection and Accessories | Page 28 to 31Borescopes, Pipe Inspection Cameras, Extension Cables and Other Accessories

Test Leads & Accessories | 2 to 33Test Lead Sets, Test Leads, Kelvin Test Leads, Fused Test Leads, Connecting Leads, High Voltage Probe, Alligator Clips, test probes and other components

Thermocouples and Temperature Probes | Page 34 to 35Immersion Probes, Penetration Probe, Airflow Probe, Clamp-on Probe, Surface Probes, Thermocouples, Adapter and Connectors

Carrying Cases | Page 36Soft and Hard Cover Carrying Cases

Rycom | Page 37Rycom Instruments - Cable and Pipe Locating Kits, Fault Finding Kits

Compatibility Charts | Page 38Compatibility of Test Leads with Accessories, Compatibility of Meters with Test Leads

Table of Contents

www.mtpinc.com4

Voltage Testers & Multimeters

MTP 101 I Non-Contact Voltage Detector

• Dual voltage range: 12 to 50V and 51 to 1000V• Visual and sound indication• Suitable for aircraft electrical systems up to 400Hz• Integrated flashlight• CAT IV 1000V safety rating

Order Code: MTP101Included: Batteries, manual

MTP VT-06 | Non Contact Voltage Detector

• 90 to 240V AC, 50 to 60Hz• Visual and sound indication• Ideal for electrical troubleshooting, detecting a live AC source and

locating a burned-out bulb in a circuit • CAT IV 1000V safety rating

Order Code: MTPVT06Included: Mini-screwdriver, batteries, operation instructions indicated on product packaging

MTP 278 | Non-Contact High Voltage Detector

• 8 voltage settings: 240V, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, 275kV• Sound and visual 360° LED indication• Compatible with most hot sticks• Self-test function• Suitable for indoor and outdoor use (IP65)• Safety standard: EN 61326-1, CISPR 11, EN 61000-4-2,

EN 61000-4-3, EN 61000-4-8

This product may only be sold in Canada

Order Code: MTP278Included: Hard cover carrying case, disconnect hook, fuse extractor head, batteries, manual

www.mtpinc.com 5

MTP 310 | Analog Multimeter

• Voltage measurement up to 1000V AC/DC• Current voltage measurement up to 250mA DC• Resistance, leakage current, hFE and db measurements• Easy to read 3-color scale• Diode protected meter prevents damage due to overload• Safety fused on all ranges

Order Code: MTP310Included: Test leads, manual

MTP 1020 | Pocket Multimeter

• Voltage measurement from 4 to 600V AC/DC• Current measurement from 40mA to 400mA AC/DC• Auto-range and integrated test leads• Resistance measurement• CAT II 600V safety rating

Order Code: MTP1020Included: Integrated test leads, protective sleeve, batteries, manual

MTP 1025 | Pocket Multimeter

• Voltage measurement up to 600V AC/DC• Current measurement 400µA to 200mA• Auto-range and integrated flashlight• Resistance, capacitance, frequency, duty cycle, and diode check• CAT III 1000V safety rating

Order Code: MTP1025Included: Integrated test leads, batteries, manual

www.mtpinc.com6

MTP 1032 | Multifunction Tester

• Voltage measurement up to 690V AC/DC

• Polarity and high voltage indication

• Phase rotation, continuity and self diagnostic tests

• Integrated flashlight

• CAT IV 600V safety rating

Order Code: MTP1032Included: Integrated probe, manual

MTP 2326 | Digital Multimeter

• Voltage measurement up to 1000V DC

• Voltage measurement up to 750V AC

• Current measurement up to 10A AC/DC

• Resistance, capacitance, inductance, continuity, HFE, and

diode test

• CAT IV 600V safety rating

Order Code: MTP2326Included: Test leads, holster, multi-function socket, battery,

manual

MTP 2327 | Digital Multimeter

• Voltage measurement up to 1000V DC

• Voltage measurement up to 750V AC

• Current measurement up to 10A AC/DC

• Frequency, resistance, capacitance, temperature (k), continuity,

HFE, and diode test

• CAT III 600V safety rating

Order Code: MTP2327Included: Test leads, type-k thermocouple, multi-function socket,

holster, battery, manual


www.mtpinc.com 7

MTP 2850A | TRMS Digital Multimeter

• Voltage measurement up to 1000V DC• Voltage measurement up to 750V AC• Current measurement up to 10A AC/DC• Resistance, capacitance, frequency, duty cycle, temperature (k)• CAT III 1000V safety rating

Order Code: MTP2850AIncluded: Test leads, multi-function socket, type-k temperature probe, computer interface cable, carrying case, software CD, batteries, manual

MTP 2860 | TRMS Industrial Multimeter

• Voltage measurement up to 1000V AC/DC• Current measurement up to 10A AC/DC• Resistance, capacitance, frequency, temperature (k)• Waterproof• CAT IV 600V safety rating

Order Code: MTP2860Included: Test leads, type-k thermocouple, thermocouple adaptor, x02 protective caps, carrying case, battery, manual

MTP MS-5300 | Multimeter

• Resistance measurement up to 60MΩ• Capacitance measurement up to 6mF• Inductance measurement up to 60H• Auto and manual range, data hold• Min/Max value measurements• Designed according to the international safety standard IEC1010-1

Order Code: MTPMS5300Included: Test leads, multi-function socket, carrying case, RS-232 cable, strap, driver (CD), manual

www.mtpinc.com8

MTP 1551 | Automotive DMM

• Ideal for working on hybrid vehicles• Voltage measurement up to 600V AC/DC• Current measurement 40mA to 20A AC/DC• Resistance, RPM (tachometer), dwell angle, duty cycle, frequency,

temperature (k), capacitance, and pulse width• CAT IV 600V safety rating

Order Code: MTP1551Included: Test leads, type-k temperature probe, inductive pick-up, alligator clips, fused diagnostic test lead for ATC, x02 protective caps, carrying case, battery, manual

MTP ST-175-CVS AC Voltage/Current Data Logger

• Current measurement up to 200A AC• Voltage measurement up to 600V AC• Sampling capacity of 100,044 data points (total)• ACV, load current and leakage current measurement• USB interface• CAT III 600V safety rating

Order Code: MTPST175CVSIncluded: Current sensor, voltage sensor, test probes, alligator clips, usb cable, software cd, batteries, manual

MTP 110 | GFI Receptacle Tester

• Detects faulty wiring in 3 wire receptacle• Light pattern indicates condition of wiring• Trips GFI receptacle to indicate receptacle is operational

Order Code: MTP110Included: Operation instructions indicated on product packaging


9www.mtpinc.com

Clamp-On Meters

MTP 3093 | AC Clamp Meter• 400 A AC current measurement• 600 V AC/DC voltage measurement• Resistance measurement up to 40.00MΩ• Temperature, capacitance and frequency measurement• CAT III 600 V/CAT II 1000 V safety rating

Order Code: MTP3093Included: Test leads, carrying case, alligator clips, type-k thermocouple, type-k thermocouple adaptor, batteries, manual

MTP 3094 | AC/DC Clamp Meter• 400 A AC/DC current measurement• 600 V AC/DC voltage measurement• Resistance measurement up to 40.00MΩ• Temperature, capacitance and frequency measurement• CAT III 600 V/CAT II 1000 V safety rating

Order Code: MTP3094Included: Test leads, carrying case, alligator clips, type-k thermocouple, type-k thermocouple adaptor, batteries, manual

MTP 3095 | TRMS AC Clamp Meter• True-rms AC measurement capability• 1000 A AC current measurement• 600 V AC/DC voltage measurement• Resistance measurement up to 60.00MΩ• Temperature, capacitance and frequency measurement• CAT III 600 V/CAT II 1000 V safety rating

Order Code: MTP3095Included: Test leads, carrying case, alligator clips, type-k thermocouple, type-k thermocouple adaptor, battery, manual

MTP 3096 | TRMS AC/DC Clamp Meter• True-RMS AC measurement capability• 1000 A AC/DC current measurement• 600 V AC/DC voltage measurement• Resistance measurement up to 60.00MΩ• Temperature, capacitance and frequency measurement• CAT III 600 V/CAT II 1000 V safety rating

Order Code: MTP3096Included: Test leads, carrying case, alligator clips, type-k thermocouple, type-k thermocouple adaptor, battery, manual

10 www.mtpinc.com

MTP iC410 | AC/DC Clamp-On Adapter

• 400 A AC/DC current measurement• Non-contact voltage measurement 50-600 V AC• Clamp jaw opening: 1.2" (30mm)• Ideal for low current automotive, industrial control, or appliance repair• CAT IV 300 V/CAT III 600 V safety rating

Order Code: MTPiC410Included: Integrated connection leads, batteries, manual

MTP iC1010 | AC/DC Clamp-On Adapter

• 1000 A AC/DC current measurement• CAT II 600 V safety rating• Clamp jaw opening: 1.2" (30mm)

Order Code: MTPiC1010Included: Test leads, carrying case, battery, manual

MTP ST-337 | Mini AC/DC Clamp Meter

• 80A AC/DC current measurement• 400mV to 600V AC/DC voltage measurement• Jaw size: 0.5" (12,7mm)• CAT III 600V safety rating

Order Code: MTPST337Included: Test Leads, carrying case, 9V battery

MTP LS-100 | Line Splitter

• Line splitter for current measurement• Works on 120V lines, 15 ampere capacity• Modes: Direct reading (x01) and increased sensitivity (x10)• Compatible with most clamp-ons• Voltmeter input jacks

Order Code: MTPLS100Included: Manual

Clamp-On Meters

11www.mtpinc.com

Preventive Maintenance

MTP 3200 | Power Quality Analyzer

• Input Channels: 4 (3 phases + neutral) DC Coupling• Measures: Voltage AC/DC, Current AC, Frequency, Dips &

Swells, Harmonics, Power and Energy, Flicker, Unbalance, Voltage Transients, Inrush Current

• Max. Input Voltage: 1000V RMS• Current Range: 1 to 3000A RMS with supplied current clamps

Several current clamp models available: Ranging from low amperage (up to 5A) to high amperage (up to 5000A). Sold separately

• Recording memory: Data stored in TF card (micro SDHC), 8GB• Duration Time: 2 hours to 1 year (depending on the selected

recording interval)• Sampling Resolution: 8 channels, 16 bits AD• CAT IV 600V safety rating

Order Code: MTP3200Included: x04 flexible current probes, x05 alligator clip test leads, power adapter, carrying bag, software, manual

MTP 3200-CTC1535 | Current Probe

• Measurement Range: 1A ~ 1000A• Output Voltage Ratio: 1mV/A• Working Frequency:

40Hz ~ 100kHz• Clamp Radius: 52mm• CAT III 600V Safety Rating

Order Code: MTP3200CTC1535

MTP 3200-PY-5000A | Current Probe

• Primary Current Reading: 5000A• Output Voltage Ratio: 50mV/1000A• Measurement Range Accuracy:

20A ~ 5000A, ±1% + Position Error• Maximum Allowable Input: 100KA• CT Perimeter: 50mm• Cable Length: 200cm

Order Code: MTP3200PY5000A

MTP 3200-KLC8C-5A | Current Probe

• Measurement Range: 5A• Output Voltage Ratio: 10mV/A• Working Frequency: 45Hz ~ 55Hz• Clamp Radius: 8mm

Order Code: MTP3200KLC8C5A







12 www.mtpinc.com

MTP 4010 | Insulation Tester

• DC Test Voltage: 250V, 500V, 1000V• Voltage Measurement: 1000V DC, 750V AC• Insulation Resistance Measurement:

200MΩ (250V & 500V), 2000MΩ (1000V)• Resistance: 200Ω, 200kΩ• CAT III 1000V safety rating

Order Code: MTP4010Included: Test leads, large alligator clip, alligator clips, strap, batteries, carrying case, manual


• Designed to test the integrity of electric heated floor systems• Tests insulation, resistance and continuity• Insulation Resistance Measurement:

2MΩ to 10GΩ (250V), 4MΩ to 10GΩ (500V), 4GΩ (1000V)• Heating Cable Resistance: 999.9Ω• Floor Probe Resistance: 99.99kΩ• DC Voltage Range: 999V• AC Voltage Range: 999V (40Hz ~ 500Hz)• CAT III 1000V safety rating

Order Code: MTP4015Included: Test leads, alligator clips, carrying case, batteries, manual


• Insulation Test Range: 0.1MΩ to 60GΩ• Insulation Test Voltages: 500V, 1000V, 2500V, 5000V• AC/DC Voltage: 0.5V to 600V• Resistance: 0.1Ω to 6KΩ• CAT IV 600V safety rating

Order Code: MTP4055Included: Alligator clips and test leads (green, red, black), two plug test lead with hook tip and pointed tip, hard carrying case, power adaptor, batteries, manual


13www.mtpinc.com

MTP TIN7D | Insulation Tester 10kV DC

• 20 Insulation test voltages: From 500V to 10kV (Adjustable in 500V voltage steps)

• Insulation Resistance Measurement: 50 GΩ (1kV), 125 GΩ (2.5kV), 250 GΩ (5kV), 500 GΩ (10kV)

• Calculate Dielectric Absorption Ration (DAR) automatically• Calculation Polarization Index (PI) automatically• Warning of external voltage presence (>500V AC/DC)• Measures insulation time duration of the test• Overload protection• CAT III 300V safety rating

Order Code: MTPTIN7DIncluded: Test leads, green test lead probe, blue alligator clip test lead, red large test probe, red and green large alligator clip, shoulder strap, hard carrying case, batteries, manual

MTP 4137MO | Digital Milli-Ohmmeter

• Five (5) measurement ranges: 100µΩ (0 - 200.0mΩ), 1mΩ (0- 2000mΩ), 10mΩ (0 – 20Ω), 100mΩ (0 – 200 Ω), 1Ω (0 - 2000Ω)

• Test current (DC): 1mA (2000Ω), 10mA (200Ω/20Ω), 100mA (2000mΩ/200mΩ)

• Four terminal measurement (Kelvin)• Battery powered only

Order Code: MTP4137MOIncluded: Alligator clip test leads (red, green, blue), strap, hard case, batteries, manual

MTP 6237DLRO | Digital Micro-Ohmmeter

• Six (6) measurement ranges: 1µΩ (0 – 2.000mΩ), 10µΩ (0 – 20.00mΩ), 100µΩ (0 – 200.0mΩ), 1mΩ (0 – 2000mΩ), 10mΩ (0 – 20.00Ω), 100mΩ (0 – 200.0 Ω)

• Test current (DC): 10mA (200.0Ω), 100mA (200.00mΩ to 20.00Ω), 1A (2.000mΩ to 200.0mΩ)

• Four terminal measurement (Kelvin)• Powered by a internal rechargeable battery

Order Code: MTP6237DLROIncluded: Alligator clip test leads, integrated rechargeable battery, case, manual

14 www.mtpinc.com

Pathfinder PF-620 Breaker, Fault and Cable Locator

• Allows to locate, trace and identify “hot” and neutral wires for feeder and branch circuit wiring, breakers, fuses, panel boxes, conduit and short circuits

• Allows to trace wire runs in ceilings, walls, floors and buried installations• Operates on dead and live circuits of 9 to 600V AC/DC• Visual and sound indication

Order Code: ELPF620Included: Alligator clip test leads, transmitter, detector, battery, adapter cord, carrying case, manual

MTP 181-CBI | Circuit Tracer

• Ideal for telecommunication cables• Locate and identify wires or cables• Volume control for increased sensitivity• Built-in telephone plug• Plug receptacle is provided for headset or headphone

Order Code: MTP181CBIIncluded: Amplifier probe, tone generator, batteries, carrying case, manual

MTP 190-CBI | Circuit Tracer

• Locate and identify circuits, fuses or breakers• Works on live circuits of 110 to 125V AC• Visual and sound indication

Order Code: MTP190CBIIncluded: Receiver, transmitter, battery, carrying case, manual


15www.mtpinc.com

MTP MS-2301 | Ground Resistance Tester

• Ideal for resistance measurements of power transmission and communication lines

• Measurement of leakage current as low as 1mA• Measurement of current of the neutral line up to 40A RMS • Memory storage capacity: 99 groups of resistance measurements • Alarm function setting: from 1 Ohm to 100 Ohms• Clamp measurement size: 45mm×32mm • Clamps with double-layer insulation

Order Code: MTPMS2301Included: Resistance detector rings (1 Ω, 5 Ω, 10 Ω), battery, hard case, cleaning tissue, manual

MTP 8010 | Phase Sequence and Motor Detector

• 3 in 1 Instrument: open phase, phase sequence and motor rotation• This model is ideal for installing conveyor lines, pump systems and

interconnected drivers• AC Input Voltage: from 100 up to 600V• Battery powered• CAT III 600V safety rating

Order Code: MTP8010Included: Test leads (red, black & white), case, manual

MTP AT-8 | Tachometer

• Contact and non-contact measurements with laser sighting• Measurement types: Rotation Speed (RPM), Total Revolution

(REV), Frequency (Hz), Surface Speed (m/min, in/min, ft/min, yd/min) and length (m, in, ft, yd)

• Contact measurement range: 2 to 20,000 RPM• Non-Contact measurement range: 2 to 99,999 RPM• 40 Readings Memory: 10 MAX., 10 MIN., 10 AVG., and 10 DATA

measurements

Order Code: MTPAT8Included: Contact adaptors (cone, wheel, funnel), x03 reflective tape, battery (1 x 9V), carrying case, manual

16 www.mtpinc.com

MTP 7201 | Temperature Calibrator

Simulates voltage, resistance and temperature• Voltage Output: -10.00 to 110.0mV and -100.00 to 1100.0mV• Resistance Output: 0.0 to 400.0Ω• Thermocouple Temperature Output: -200.0°C to 1800°C

(Depending on the thermocouple type: R, S, B, E, K, J, T, N) • RTD Temperature Output: -200.0°C to 850°C

(Depending on the RTD type: Pt100, Cu50)

Order Code: MTP7201Included: Test leads with alligator clips, holster, case, manual

MTP 7202 | Thermocouple Calibrator

Measures and simulates voltage and temperatureMeasure:• Voltage Measurement: -10.00 to 110.0mV• Thermocouple Temperature Measurement: -200.0°C to 1800°C

(Depending on the thermocouple type: R, S, B, E, K, J, T, N) Output:• Voltage Output: -10.00 to 110.00mV and -100.00 to 1100.0mV• Thermocouple Temperature Output: -200.0°C to 1800°C

(Depending on the thermocouple type: R, S, B, E, K, J, T, N)


MTP 7205 | Loop Calibrator

Measures and simulates voltage and currentMeasure:• Voltage Measurement: -0.200 to 28.000V• Current Measurement: -1.000 to 22.000mA• Loop Current Measurement: 0.000 to 22.000mAOutput:• Current Output: 0.000 to 22.000mA• Analog Transducer Output: 0.000 to -22.000mA• Loop Power: 24V


Calibrators and Power Supplies

17www.mtpinc.com

MTP 7214 | Temperature Calibrator

Measures and simulates voltage, resistance and temperatureMeasure:• DC Voltage Measurement: -5.000 to 55.000 mV and -50.00 to 550.00 mV• Resistance Measurement: 0.00 to 550.00Ω and 0.0000 to 5.5000 KΩ• Thermocouple Temperature Measurement: -200.0°C to 1820°C

(Depending on the thermocouple type: R, S, B, E, K, J, T, N,L,U)• RTD temperature Measurement: -200.0°C to 800.0°C

(Depending on the RTD type: Pt100, Pt200, Pt500, Pt1000, Cu10, Cu50)Output:• DC Voltage Output: -10.00 to 110.000 mV and -100.00 to 1100.00 mV• Resistance Output: 0.00 to 400.00Ω and 0.0000KΩ to 4.0000 KΩ• Thermocouple Temperature Output: -200.0°C to 1820°C

(Depending on the thermocouple type: R, S, B, E, K, J, T, N,L,U)• RTD Temperature Output: -200.0°C to 800.0°C

(Depending on the RTD type: Pt100, Pt200, Pt500, Pt1000, Cu10, Cu50)

Order Code: MTP7214Included: Connecting leads, test probes, alligator clips, fuse, holster, case, manual

MTP 7215 | V/mA Calibrator

Measures and simulates voltage, current, frequencyMeasure:• DC Voltage Measurement: -20.00 to 220.00mV, -0.5000 to 5.5000V, -5.000 to 55.000V• Current Measurement: -4.000 to 55.000mA• Frequency Measurement: 3Hz to 500Hz, 3Hz to 5.0000kHz, 3Hz to 50.000kHz• Continuity: Close/Open• Pressure: Defined by pressure module Output:• DC Voltage Output: -100.00 to 1100.00mV, -1.0000 to 11.0000V• Current Output: 0.000 to 22.000 mA• Frequency Output: 1.00Hz to 110.00Hz, 0.100kHz to 1.100kHz, 1.0kHz to 11.0kHz• Pulse: 1 to 100,000 cycles• Loop Power: 24V

Order Code: MTP7215Included: Connecting leads, test probes, alligator clips, fuses, holster, case, manual

MTP BX-150 | Dry-Well Temperature Calibrator

• Temperature Range: 33 to 300°C (91.4 to 572°F)• Resolution: 0.1°C/0.1°F• Aperture Diameter: 4.2mm, 6.8mm, 5mm, 3.5mm• Well depth: 4" (100mm)

Order Code: MTPBX150Included: Power cable, manual

18 www.mtpinc.com

MTP BX-500 | Infrared Calibrator

• Temperature Range: 50 to 500°C (122 to 932°F)• Target Emissivity: 0.95• Resolution: 0.1°C/0.1°F• Aperature Diameter: 2.28" (58mm)

Order Code: MTPBX500Included: Power cable, manual

MTP 3005D | DC Regulated Power Supply

• Regulated output voltage: 0 - 30V• Regulated output current: 0 - 5A• Input voltage: 104 ~ 127V AC (60Hz), or 207 ~ 253V AC (50Hz)• Protection: constant current or short-circuit protection

Order Code: MTP3005DIncluded: Power cable, manual

MTP 5003 | Power Supply Single Output

• Current restricted protection• Short-circuit protection • Regulated Output Voltage: 0 - 50V DC• Regulated Output Current: 0 - 3A• Input Voltage: 104 ~ 127V AC (60Hz), or 207 ~ 253V AC (50Hz)

Order Code: MTP5003Included: Power cable, manual

MTP 5003-2 | Power Supply Dual Output

• Double power can be used with both series and parallel connection

• Regulated output voltage: 2 x 0 – 50V DC• Regulated output current: 2 x 0 - 3A• Current restricted protection • Short-circuit protection• Input voltage: 104 ~ 127V AC (60Hz), or 207 ~ 253V AC (50Hz)

Order Code: MTP5003-2Included: Power cable, manual

Calibrators and Power Supplies

19www.mtpinc.com

MTP 1325 | Infrared Thermometer

• Temperature range: -50 to 450°C (-58 to 842°F)• Field of view: 12:1• Emissivity: 0.95 fixed• Single laser sighting• Max. temperature display• Backlit display

Order Code: MTP1325Included: Battery, case, manual


• Temperature range: -50 to 1000°C (-58 to 1832°F)• Field of view: 50:1• Adjustable emissivity: 0.1 to 1.00• Single laser sighting• High and low temperature alarm• Backlit display

Order Code: MTP1328Included: Battery, hard case, manual


• Temperature range: -50 to 550°C (-58 to 1022°F)• Field of view: 12:1• Adjustable emissivity: 0.1 to 1.00• Dual laser sighting• High and low temperature alarm• Backlit display


Temperature & Humidity

20 www.mtpinc.com

MTP 1320 | Infrared Video Thermometer

• Photo and video functions• IR Temperature range: -50 to 1000°C (-58 to 1832°F)• Type-K temperature range: -50 to 1370°C (-58 to 2498°F)• Field of view: 50:1• Air & dew point temperature range: 0 to 50°C (32 to 122°F)• Relative humidity range: 0 to 100% RH• Dual laser sighting• Adjustable emissivity: 0.10 to 1.00

Order Code: MTP1320Included: Thermocouple type-k, tripod, power adapter, USB cable, hard case, rechargeable battery, manual

MTP 1321i | Thermal Imager

• Temperature range: -20 to 300°C (-4 to 572°F)• Adjustable emissivity: 0.1 to 1.00• Image capture frequency: 9Hz• Hot and cold spot tracking• High and low alarm setting• Field of view: 38° x 38°• Selection of 6 color palettes• 2.2" color TFT LCD display• Image blending function: from full infrared to full visual• Micro-SD card

Order Code: MTP1321iIncluded: Tripod, USB cable, power adapter, hard case, rechargeable battery, manual

MTP 1324-RH Dew Point Scanner and Infrared Thermometer

• Temperature range: -50 to 260°C (-58 to 500°F)• Relative humidity range: 0 to 100% RH• Dew point temperature range: -30 to 100°C (-22 to 212°F)• Field of view: 12:1• Emissivity: 0.95 fixed• Dual laser sighting• Backlit display

Order Code: MTP1324RHIncluded: Battery, case, manual


21www.mtpinc.com

MTP 1015 | Mini Infrared Thermometer

• Temperature range: -30 to 270°C (-22 to 518°F)• Field of view: 6:1• Emissivity: 0.95 fixed• Pocket size and light-weight• Backlit display

Order Code: MTP1015Included: Batteries, manual

MTP ST-171 | Temperature and RH Recorder

• Temperature range: -40 to 70°C (-40 to 158°F)• Relative humidity range: 0 to 100% RH• Memory: 32,000 readings (16,000 temperature/16,000 humidity)• Dew point indication• User selectable alarms• USB Interface and analysis software• 14 selectable measuring cycles

Order Code: MTPST171Included: Battery, software, screws, manual

MTP ST-172 | Temperature and RH Recorder

• Temperature range: -40 to 70°C (-40 to 158°F)• Relative humidity range: 0 to 100% RH• Memory: 32,700 readings• Dew point indication using Windows software• 14 selectable measuring cycles• User selectable alarms • USB Interface and analysis software

Order Code: MTPST172Included: Battery, USB cable, combination lock, screws, software, manual

MTP ST-9238B | Pocket Digital Thermometer

• Temperature range: -50 to 150°C (-58 to 302°F)• Stainless steel stem length: 5"• Diameter of stem: 1/8"• Easy to read display• Plastic sleeve protector/holder included

Order Code: MTPST9238BIncluded: Battery, protector, manual

22 www.mtpinc.com

MTP 1368 | Humidity and Temperature Meter

• Dew point temperature range: -30 to 100°C (-22 to 199°F)• Wet bulb temperature range: 0 to 80°C (32 to 176°F)• Relative humidity range: 0 to 100% RH• Fast response time for relative humidity• Backlit display


MTP 1012 Mini Temperature and Humidity Meter

• Temperature range: -20 to 60°C (-4 to 140°F)• Relative humidity range: 0 to 100% RH• Pocket size and light-weight• Backlit display

Order Code: MTP1012Included: Battery, manual

MTP 1410 | Moisture Meter

• Measures moisture level in sawn timber (also cardboard, paper) and hardened material (plaster, concrete and mortar)

• Function check integrated in protective cap• Wood moisture level range: 6 to 44%• Material moisture level range: 0.2 to 2%• Measuring principle: Electrical resistance• Electrodes are integrated and replaceable• Electrode length of 8mm

Order Code: MTP1410Included: Test electrodes, protective cap, batteries, manual

MTP ST-128M | Pinless Moisture Meter

• Measures moisture content (MC) %• Measuring range: 0 to 100%• Depth of penetration about 20 – 40mm• Max./Min. display and alarm functions• Backlit display

Order Code: MTPST128MIncluded: Batteries, manual


23www.mtpinc.com

MTP 2010 | Thermo-Anemometer

• Air velocity measurement displayed in Meters per second: from 1.0 to 30 m/s Feet per minute: from 196 to 5900 ft/min Kilometers per hour: from 3.6 to 108 km/h Miles per hour: from 2.2 to 67 mph Nautical miles per hour: from 1.9 to 58 knots

• Temperature measurement: from -10 to 60°C (14 to 140°F)• 16" detector makes it easy to measure hard-to-reach areas


MTP 2020 | Hot Wire Anemometer

• Ideal for very low air velocity measurements• Air velocity measurement displayed in

Meters per second: from 0.1 to 25 m/s Feet per minute: from 20 to 4925 ft/min Kilometers per hour: from 0.3 to 90 km/h Miles per hour: from 0.2 to 55.8 mph Nautical miles per hour: from 0.2 to 48.5 knots

• Temperature measurement: from 0 to 50°C (32 to 122°F)• Microprocessor circuit for maximum possible accuracy• Large LCD and backlit display• Max/Min. readings with recall & data hold

Order Code: MTP2020Included: Anemo probe, battery, hard case, USB cable, software, power supply, manual

MTP 1011 | Mini Anemometer

• Air velocity measurement displayed in Meters per second: Range from 1.1 to 20 m/s Kilometers per hour: Range from 0.8 to 72 km/h Feet per minute: Range from 80 to 3934 ft/min Miles per hour: Range from 0.9 to 44.67 mph Nautical miles per hour: Range from 0.8 to 38.67 knots

• Pocket size and light-weight• Backlit display


MTP 9310 | Digital Manometer

• Measures gauge/differential pressure• Gauge or differential pressure measurement range from 0 to 5 psi• 11 selectable units of measurement: inH2O, psi, mbar, kPa, inHg, mmHg, ozin², ftH2O,

cmH2O, kgcm², bar• Simple fitting for hose connection• Max/min. and data hold function• Over range indication• Auto power off

Order Code: MTP9310Included: Battery, USB cable, software, input tubes, case, power supply, manual

Environment Meters

24 www.mtpinc.com

MTP 1013 | Mini Sound Level Meter

• Sound level range from 40dB to 130dB• Frequency: between 31.5Hz and 8KHz• A weighted sound pressure level• Pocket size and light-weight

Order Code: MTP1013Included: Battery, windscreen, manual

MTP 1810 | Sound Level Meter

• Sound level Ranges: LO: 30 to 80 dB MED: 50 to 100 dB HI: 80 to 130 dB AUTO: 30 to 130 dB

• A & C weighted sound pressure level• Fast and slow response• Frequency range: 31.5Hz to 8kHz• Max/Min. measurements• Analog AC/DC outputs for connection to frequency analyzer or X-Y

shaft recorder (AC= 1Vrms, DC=10mV/dB)• Conforms to IEC61672-1, class 2

Order Code: MTP1810Included: Battery, screwdriver, windscreen, software, USB cable, tripod, power supply, hard case, manual

MTP ST-805 | Sound Level Meter

• Sound level Ranges: LO: 30 to 100 dB HI: 60 to 130 dB

• A & C weighted sound pressure level• Frequency range: 31.5Hz to 8kHz• Fast and slow response• Max and data hold functions

Order Code: MTPST805Included: Battery, case, windscreen, manual

MTP 1890 | Sound Level Calibrator

• 94dB and 114dB sound calibration• Output frequency: 1kHz• Fits ½" diameter microphone• Accurate and simple to use


Environment Meters

25www.mtpinc.com

MTP 1014 | Mini Light Meter

• Light measurement range: up to 40,000 Lux/3717 Fc• Measuring sample rate: 1.5 times per second• Auto-ranging and max hold• Pocket size and light-weight• Backlit display


MTP 1210 | Light Meter

• Light measurement range: up to 300,000 Lux/27,881 Fc• 41 segments analog bargraph• Max and data hold• Auto-ranging• Auto power off

Order Code: MTP1210Included: Battery, holster, case, manual

MTP CO-180 | Carbon Monoxide Detector

• CO Measurement range: 0 to 1000 PPM• Sound indication (above 200 PPM)• Pocket size and light-weight• Fast sampling• Max and data hold function• Auto power off

Order Code: MTPCO180Included: Battery, case, manual

MTP GD-3300 | Combustible Gas Leak Detector

• Gases detected: Natural Gas, propane, butane, methane, acetone, alcohol, ammonia, steam, carbon monoxide (not to quantify), gasoline, jet fuel, hydrogen sulfide, smoke, industrial solvents, lacquer thinner, naphtha

• Tick rate is adjustable for use in contaminated environments: Eliminates background gas concentration

• Sensitivity: 50ppm methane• Intermittent duty cycle• Alarm: Visible and audible at 10% LEL for methane• Sensor type: Solid state• Probe length: 16"

Order Code: MTPGD3300Included: Battery, case, manual

26 www.mtpinc.com

MTP 3100 Electricity Consumption Monitoring System

• Displays: Instant Energy (kW), Energy Consumption (kWh), Average Cost of Electricity Consumption per Hour ($), Ambient Temperature, Relative Humidity

• Tariff Rate Settings: Time-of-use (TOU) and Normal Meter Pricing (NMP)

• History Function: Data available for energy consumption (KWh), cost of electricity consumption ($), and pollution (Kg CO2) by day, week and month

• Electricity consumption tendency – Current week histogram• Adjustable alarm for max. energy consumption • Transmitter for single to three phase system 90V to 600V

(3rd clamp sold separately) • 18mm clamp diameter with maximum capacity of 200A per clamp• Software included

Order Code: MTP3100Included: Monitor, transmitter, x02 clamps 200A/18mm, RJ45-USB data cable, power supply, batteries (x02 C), software, manual

MTP 3100 | Optional Accessories

MTP 3100-CL18MM | Clamp• Clamp diameter: 18mm

• Max. Amperage of the clamp: 200A

Order Code: MTP3100CL18MM

MTP 3100-CL25MM | Clamp• Clamp diameter: 25mm

• Max. Amperage of the clamp: 200A

Order Code: MTP3100CL25MM

MTP 3100-T-25MM | Clamp and Transmitter• Clamp diameter: 25mm• Max. Amperage of the clamp: 200A• Transmitter for single to three phase system 90V to 600V** Package includes a single clamp, additional clamps sold separately.

Order Code: MTP3100T25MM

Specialized Testers

MTP PM-15 Electricity Consumption Monitoring System

• Measures: Voltage, Current, Frequency, Watt, Power Factor,

and Greenhouse Gas Emissions

• Electricity cost displayed in real, hour, monthly and yearly

• Determine the running cost of your appliances

Order Code: MTPPM15

Included: Carrying case, manual

Measure Circuit Consumption

Measure Total Panel Consumption

27www.mtpinc.com

MTP 6460 | Laser Distance Meter

• Measurement range: 0.05 to 50m (0.16ft to 164ft)• Addition and Subtraction• Area, Volume calculations• Pythagoras function for indirect measurements• Continuous measurements• Minimum and Maximum distance tracking• Front and rear edge reference• Display illumination and multi-line display• History: Last 20 readings• Sound indication

Order Code: MTP6460Included: Case, strap, screwdriver, batteries, manual

MTP ST-9901 | Multi-Function Tester

• Multi-purpose tester for batteries, bulbs, fuses and continuity• Audible continuity tester via test probes supplied• Readings show up on clear scale• Auto power on/off

Order Code: MTPST9901Included: Test leads, battery, manual

MTP 9100 | Refractometer

• Verifies the frost protection performance in coolants and also determines the density of battery acid using the refraction principle

• Suitable for transportation vehicles which use ethylene glycol as coolant and sulfuric acid as charging liquid

• Compensation temperature range 10°C to 30°C

Order Code: MTP9100Included: cleaning cloth, one dropper, mini screwdriver, soft pouch, hard case, manual

MTP 7100 | Lamp Tester

• Test Gas Filled Lamps: fluorescent lamps, neon tubes, low and high pressure sodium vapour lamps, mercury halogen lamps, and metal halogen lamps

• Test ballasts, starters, capacitors, and resistors• Continuity tester• Torch light


28 www.mtpinc.com

MTP TF-3003BMPX | Inspection Camera

• Video and photo functions• Recording function (Micro-SD card included)• Detachable 3.5" color LCD monitor• Flexible cable retains configured shape• Camera head with built-in adjustable LED lights• 9.8mm camera head diameter• Focal distance: 3 ~ 6 cm• View of angle: 54°• Water resistant camera head and cable, rated IP67• AVI output (PAL/NTSC), USB connection to PC

Order Code: MTPTF3003BMPXIncluded: Hard case, attachments (hook, mirror, magnet), strap, tv/video cable, screen connection cable, USB cable, batteries, manual

MTP TF-2809EX | Inspection Camera

• Camera head with built-in adjustable LED lights• 10mm Camera head diameter• Flexible cable retains configured shape • Water resistant camera head and cable, rated IP67• 2.4" TFT LCD color monitor• Focus distance: 3 6cm• Field of view: 54°

Order Code: MTPTF2809EXIncluded: Hard case, attachments (hook, mirror, magnet), batteries, manual

Video Inspection and Accessories

29www.mtpinc.com

MTP TF-2808 | Inspection Camera

• Camera head with adjustable LED lights• 14mm camera head diameter• Flexible cable retains configured shape• Water resistant camera head and cable, rated IP67• Camera cable length: 60cm• Field of view: 54°• Powered by USB port

Order Code: MTPTF2808Included: Hard case, software, magnet attachment, manual

MTP TF-2809X-3M 3 Meter Extension Cable

• Cable length: 3 meters• Cable is flexible and retains shape• Water resistant cable, rated IP67• Camera head sold separately

Order Code: MTPTF2809X3M

Compatible with: MTP TF-2809EX and MTP TF-3003BMPX

MTP TF-2809X-3MCAM 3 Meter Extension Cable with Camera

• Cable length: 3 meters• Cable is flexible and retains shape• Camera head diameter: 9mm • Water resistant camera head and

cable, rated IP67

Order Code: MTPTF2809X3MCAM


MTP TF-2809X5.5MM Extension Cable with Mini Camera Head

• Cable length: 1 meter• Flexible cable• Camera head diameter: 5.5mm • Water resistant camera head

and cable, rated IP67

Order Code: MTPTF2809X5.5MM


MTP TF-XCU0155V | Rotating Camera Head

• Cable length: 1 meter• Cable is flexible and retains shape• Camera head with built-in LED lights• Camera deflection (up/down): 220°• Camera head diameter: 5.5mm• Camera rotation: 340°• Water resistant camera head


Order Code: MTPTFXCU0155VCompatible with: MTP TF-2809EX and MTP TF-3003BMPX

MTP TF-XC0580V 5 Meter Extension Cable with Camera

• Cable length: 5 Meters• Cable is flexible• Camera head with built-in LED lights• Camera head diameter: 8.0mm• Field of view: 54°• Water resistant camera head


Order Code: MTPTFXC0580V


MTP TF-XC2080V 20 Meter Extension Cable with Camera

• Cable length: 20 Meters• Cable is flexible and retains shape• Camera head diameter: 8.0mm• Field of view: 54°• Camera head with built-in LED lights• Water resistant camera head


Order Code: MTPTFXC2080V


30 www.mtpinc.com

MTP 3188DN | Pipe Inspection Camera

• Camera head with built-in adjustable LED lights• 5 meter water resistant camera head and cable,

rated IP68• 19 meter fibreglass rod cable (30 meter cable is optional)• USB and SD ports for digital video recording

(USB stick and SD card not included)• Remote control for DVR use only• Diameter of camera head: 7/8"• Camera vision angle 90°• Sapphire glass lens • 7" TFT LCD color monitor • Heavy duty waterproof case• Camera protectors (skids): 1 ½", and 2 ½"

Order Code:MTP3188DN19M (Kit w/19 Meter Cable)MTP3188DN30M (Kit w/30 Meter Cable)Included: Camera, monitor, cable with wheel (long), AC cord, battery case, big case, DC 12V power supply, sunshade, ball protection, soft cable (short), remote control, software disk

MTP 3488T | Pipe Inspection Camera

• Spring kit w/built-in 512Hz transmitter• Self leveling camera head with 1.5" diameter and

adjustable LED lights • 5 meter water resistant camera head and cable,

rated IP68• 120 meter fiberglass rod cable • Stainless wheel w/distance counter• 10" TFT LCD Monitor • DVR and built-in microphone for voice recording• Remote control for DVR use only• Heavy Duty Waterproof Case• USB and SD ports for digital video recording

(USB stick and SD card not included)• Camera protectors (Skids): 3", 6", and 9"

Order Code: MTP3488TIncluded: Self-leveling camera head with built-in transmitter, monitor, cable with wheel, battery charger, battery case, power adapter, camera skids (3 pcs), video cable, remote control, software disk, skid screws (12 pcs)

Video Inspection and Accessories

31www.mtpinc.com

MTP 3188-CAM | Camera Head

• Camera head with built-in adjustable LED lights• 5 meter water resistant camera head, rated IP68 • Flexible spring neck• Camera head diameter: 7/8" • Field of view: 90°• Sapphire glass lens cover

Order Code: MTP3188CAM

Compatible with: MTP 3188DN and MTP 3488T (adaptor is required for 3488T, sold separately)

MTP 3188T-CAM | Camera Head with Transmitter

• Camera head with metal casing and diameter of 7/8"• Camera head with built-in adjustable LED lights and frequency

transmitter (512Hz)• Flexible spring neck • Can be used on 200ft, 300ft, and 400ft cable and reel with camera

head adapter (sold separately)• 5 meter water resistant camera head, rated IP68 • Field of view: 90° • Sapphire glass lens cover

Order Code: MTP3188TCAM

Compatible with: MTP 3188DN

MTP 3188-CAMADAPT | Adaptor for Camera Head

• Adapter is required when mounting the MTP 3188-CAM on the pipe inspection camera MTP 3488T

• Camera head for the MTP 3188-CAM sold separately

Order Code: MTP3188CAMADAPT

Compatible with: MTP 3188DN and MTP 3488T

MTP 3188-MINI-CAM | Flexible Camera Head

• Camera with built-in adjustable LED lights• Camera head with metal casing

and diameter or 25mm (approx. 1")• 5 meter water resistant camera

head, rated IP68 • Field of view: 90° • Flexible stainless steel neck to

facilitate turning in pipes• Sapphire glass lens cover

Order Code: MTP3188MINICAM

Compatible with: MTP 3188CR-19M/30M

MTP 3188CR-19M/30M | Cable with Reel

• Cable length options: 19 or 30 meters• Fiberglass cable with a diameter of 5.2mm• Stainless steel wheel

Order Code: MTP3188CR19M (19M cable with reel)MTP3188CR30M (30M cable with reel)


MTP 3588CR-45M | Cable with Reel

• Stainless steel wheel with support stand• Fiberglass cable• Electronic Meter• Cable diameter: 3/8"• Cable length: 45 meters (150 ft.)

Order Code: MTP3588CR45M


MTP 3288-SKID | Camera Skid Kit

• Skids for camera heads• Includes three (3) skid sizes:

3", 4" and 6"

Order Code:MTP3288SKID


MTP 3488-512HZCAM | Camera Head with Transmitter

• Self-leveling camera head with built-in 512Hz frequency transmitter and adjustable LED lights

• Camera head with metal casing and diameter of 1 ½" • 5 meter water resistant camera head, rated IP68 • Field of view: 90°• Flexible spring neck• Sapphire glass lens cover

Order Code: MTP3488512HZCAM

Compatible with: MTP 3488T

32 www.mtpinc.com

MTP TLK-100 | Automotive Test Lead Set 4mm

• Connecting leads, test probes, alligator clip test probes, crocodile clips• Best security rating: 1000V CAT III

Order Code: MTPTLK100

MTP TLK-200 | Industrial Test Lead Set 4mm

• Connecting test leads, test probes with removable security cap, alligator clips

• Best security rating: 1000V CAT III


MTP TLK-300 | Electronic Test Lead Set 4mm

• Connecting leads, test probes, hook clips, spring wire test clips, alligator clamps



MTP TLK-350 | Electrical Test Lead Set 4mm

• Connecting leads, test probes with removable security cap, alligator clip test probes



MTP AC-230 | Alligator Clips 4mm

• Jaw opening: up to 20mm• 4mm socket connection diameter• Security rating: 1000 V CAT III, 10A

Order Code: MTPAC230

MTP AC-280 | Spring Wire Test Clips 4mm

• Test clip with stainless steel spring wire grabber• Jaw opening: up to 4mm• Security rating: 1000V CAT III, 2A


MTP AC-300 | Alligator Clip Test Probes 4mm

• Spring loaded clips with steel jaws• Jaw opening: up to 15mm• Security rating: 1000V CAT III, 10A


MTP AC-320 | Flat Head Alligator Clips 4mm

• Spring loaded clips• Jaw opening: up to 28mm• Rotating button allows for testing different conductor heights• Security rating: 1000V CAT II, 600V CAT III, 10A


MTP TL-040 | Connecting Leads 4mm

• 150cm long flexible connecting leads• Double insulation silicone cable and injection• Security rating: 1000 V CAT III, 10A

Order Code: MTPTL040

MTP TP-190 | Test Probes 4mm

• Stainless steel test probes with removable security cap• Test probe diameter is 2mm• Best security rating: 1000V CAT III

Order Code: MTPTP190

Test Leads & Accessories

33www.mtpinc.com

MTP TP-623 | Test Probes 4mm

• Stainless steel test probe with 2mm diameter• Material: nylon housing• Contact: nickel plated brass • Rated Voltage: 1000 V

Order Code: MTPTP623

MTP AL-53 | Test Leads 5-10 kV 4mm

• Large-sized test probe, alligator clip with 25mm jaw opening, test probe, x02 alligator clips with 35mm jaw opening

• Best security rating: 1000 V CAT III

Order Code: MTPAL53

MTP AC-45 | Alligator Clips 2mm

• Jaw opening: up to 10mm• Security rating: 1000V CAT III, 10A• Compliance: CE

Order Code: MTPAC45

MTP TLD-36 | Test Leads 2mm

• Straight test probe with a 2mm diameter• Flexible cable with length of 90cm• Best security rating: 1000V CAT III

Order Code: MTPTLD36

MTP TLD-37 | Test Leads 2mm

• Test leads with removable security cap• Flexible cables with length of 100cm• Best security rating: 1000V CAT III

Order Code: MTPTLD37

MTP TLD-37K | Test Lead Kit 2mm

• Test Leads with removable security cap• Alligator clips• Best security rating: 1000V CAT III

Order Code: MTPTLD37K

MTP AL-52F | Test Leads with Fuse

• Test leads with fuse and removable security cap

• Screw-on alligator clips• Fuse protection rating: 690V CAT IV

Order Code: MTPAL52F

MTP TL-4137KC | Kelvin Test Leads

• Cable length of 100cm• Socket connection diameter of 4mm• Best security rating:

CAT IV 150V, 3A

Order Code: MTPTL4137KC

MTP PD-28 | High Voltage Probe AC/DC

• Input Impedance: 1000MΩ• Attenuation Ratio: 1000:1• Max Working Voltage:

40kV CC or 28kV CA• Cable Length: 100 cm

Order Code: MTPPD28

34 www.mtpinc.com

S10

4A

S10

5A

S10

6A

S10

8A

S11

0A

S11

1A

S11

2A

MTP S104A | Immersion Probe

• Type K flexible probe• Measurement range: -100 to 900°C/-148 to 1652°F• Probe length: 22.5 cm• Probe diameter: 4.8 mm

Order Code: MTPS104A

MTP S105A | Immersion Probe

• Type K flexible probe• Measurement range: -100 to 800°C/-148 to 1472°F• Probe length: 17.5 cm• Probe diameter: 3.2 mm


MTP S106A | Penetration Probe

• Type K sharp pointed tip• Measurement range: -100 to 900°C/-148 to 1652°F• Probe length: 22.5 cm• Probe diameter: 4.8 mm


MTP S108A | Airflow Probe

• Type K protected open tip• Measurement range: -100 to 600°C/-148 to 1112°F• Probe length: 15.5 cm• Probe diameter: 8 mm• Probe head diameter: 10 mm


MTP S109A | Clamp-on Probe

• Type K probe• Ideal to take temperature measurements of pipes and tubes with

diameters ranging from 6 to 22 mm• Measurement range: 0 to 200°C/-32 to 248°F


MTP S110A | Surface Probe

• Type K straight stainless steel probe head• Measurement range: -100 to 400°C/-148 to 752°F• Probe length: 11 cm• Probe diameter: 4 mm• Probe head diameter: 12 mm



• Type K right angle stainless steel probe head• Measurement range: -100 to 400°C/-148 to 752°F• Probe length: 22.5 cm• Probe diameter: 6.5 mm• Probe head diameter: 116 mm



• Type K stainless steel probe head• Measurement range: -100 to 400°C/-148 to 752°F• Probe length: 23 cm• Probe diameter: 4 mm• Probe head diameter: 8 mm


S109A

Thermocouples and Temperature Probes

35www.mtpinc.com

MTP TPK-01 | Thermocouple

• Type K bead probe• Maximum temperature:

260°C/500°F• Length: 1 meter• Diameter: 2 mm• Material: Teflon• Response time: 0.9 seconds

Order Code: MTPTPK01

MTP TPK-01H | Thermocouple


500°C/950°F• Length: 1 meter• Diameter: 3.5 mm• Material: Fiber glass• Response time: 1.1 seconds

Order Code: MTPTPK01H

MTP TPK-01HH | Thermocouple


-40 to 1200°C/-40 to 2192°F• Length: 1 meter• Diameter: 1.6 mm• Material: Inconel 600• Response time: 5 seconds

Order Code: MTPTPK01HH

MTP TPK-01H-6AL | Thermocouple

• Type K bead probe• 6mm clamp jaw opening• Maximum temperature:

-40 to 500°C/-40 to 932°F• Length: 2 meters (6 ft.)• Diameter: 3 mm• Material: Glass with stainless

steel over braid

Order Code: MTPTPK01H6AL

MTP TPK-02 | Immersion Probe

• Type K probe• Measurement Range:

-50 to 1000°C/-58 to 1832°F• Tolerance: ±2.2°C or

±0.75%/±3.6°F or ±0.75%• Probe Length: 15 cm• Probe Diameter: 3.2 mm• Material: metal sheath• Compensating wire: 100 cm


MTP TPK-03 | Surface Probe

• Type K probe• Measurement Range:

-50 to 750°C/-58 to 1382°F• Tolerance: ±2.2°C or

±0.75%/±3.6°F or ±0.75%• Probe Length: 9.4 cm• Probe Diameter: 1.25 cm• Compensating wire: 100 cm


MTP MS-3400 | Thermocouple

• Type K bead probe• Measurement Range:

-200 to 300°C/-328 to 572°F• Materials: Chromel (+) and Alumel (-)• Length: 100cm• Insulation: Fiberglass• Connector Type: Standard

multimeter banana plugs

Order Code: MTPMS3400

MTP ADPTK | Adapter

• Adaptor for banana jack• Type K

Order Code: MTPADPTK

MTP SMPK-F | Female Mini-Connector

• Female mini-connector• Type K

Order Code: MTPSMPKF

MTP SMPK-M | Male Mini-Connector

• Male mini-connector• Type K

Order Code: MTPSMPKM

36 www.mtpinc.com

MTP CC10 | Carrying Case

• Carrying case ideal for clamp-on meters

• Outer dimensions: 24 x 10 x 4.5 (cm)

Order Code: MTPCC10


• Carrying case ideal

for MTP 7100

• Outer dimensions:

27.5 x 7.5 x 3.5 (cm)

Order Code: MTPCC12


• Deluxe carrying case ideal for kits• Outer dimensions: 23.5 x 24.5 x 6 (cm)

Order Code: MTPCC40

MTP CC50 | Hard Cover Case

• Hard cover carrying case ideal for kits• Outer dimensions: 34.5 x 22 x 8 (cm)

Order Code: MTPCC50

MTP CC80 | Hard Cover Carrying Case

• Engineering plastic ABS• IP67 protection level• Temperature range:

-30 to 70°C• Outer dimension:

280 x 246 x 106 mm• Inner dimension:

260 x 200 x 93 mm• Lid/case depth:

27mm/66mm

Order Code: MTPCC80






27mm/126mm

Order Code: MTPCC82






36mm/132mm

Order Code: MTPCC85






41mm/131mm

Order Code: MTPCC90

Carrying Cases

37www.mtpinc.com

Rycom 8879 V3 | Cable & Pipe Locating Kit

• Operating Frequencies: 512Hz, 640Hz, 815Hz,

8kHz, 33kHz, 65kHz, 82kHz,118kHz & 131kHz. Passive 50Hz, 60Hz, Cathodic Protection, CATV, RF (additional frequencies upon request)

• Signal Application: Direct connection, coupler induction with optional coupler, transmitter induction

• Locating Modes: Peak, Pinpoint Peak, Null, Simultaneous Peak & Null, Left/Right Guidance, Sonde

• Graphical and numerical readouts• Manual gain control• Automatic depth, Push-button

depth and triangulation • Current measurement • Multiple power settings up to

5 or 10 watts

• Rechargeable or D-cell transmitter

Rycom 8869 V3 | Cable & Pipe Locating Kit

• Operating Frequencies: 512Hz, 640Hz, 815Hz, 8kHz, 33kHz, 65kHz, 82kHz, 118kHz, 131kHz, 200kHz & 480kHz. Passive 50Hz, 60Hz, Cathodic Protection, CATV, RF (additional frequencies upon request)

• Signal Application: Direct connection, Coupler induction with optional coupler, Transmitter induction

• Locating Modes: Peak Pinpoint Peak, Null, Simultaneous Peak & Null, Left/Right Guidance, Sonde

• Graphical and numerical readouts • Manual gain control • Automatic depth, Push-button

depth and triangulation • Current measurement &

Current direction• Multiple power settings up to 3 watt • C-cell transmitter

Rycom Stick V3 | Locating Kit

• Operating Frequencies: 815Hz, 8kHz,

33kHz & 82kHz Passive 50Hz, 60Hz, Cathodic Protection, CATV (additional frequencies upon request)


• Locating Mode: Refined peak modes, Left/Right Guidance

• Graphical and numerical readouts • Manual gain control • Push-button depth and triangulation • Multiple power settings up to 3 watt • C-cell transmitter

Rycom 8810/8873 | Locating Kit

• Powerful induction kit ideal for water and gas pipe locating

• Operating Frequencies: 82kHz, 33kHz, 640Hz, & 512Hz


• Refined peak mode & Left/Right Guidance

• Graphical and numerical readouts • Manual gain control • Push-button depth and triangulation • Multiple power settings up to 3 watt • C-cell transmitter

Rycom MSL | Ferromagnetic Locator

• Detect ferrous metals • No interference from non-ferrous metal • Audio and visual signal indication • Magnetic field polarity • One handed operation • Advanced magnetic Sensors • Strong Construction • Lightweight • Water resistant

Rycom Staff | Fault Finding Kit

• Stand-alone Directional Fault Finder

• Directional indications to fault’s location

• Reference indication for fault identification

• Rigid a-frame for strength • Durable design for field use • Locates up to 2 megohm faults

• C-cell transmitters

Rycom

38 www.mtpinc.com

Test Leads Compatibility with Accessories

Model number

AC-230

AC-280

AC-300

AC-320

AC-45

TP-190

TP-623

Meters Compatibility with Test Leads

Model number

AL-52F

AL-53

PD-28

TL-040

TL-4137KC

TLD-36

TLD-37

TLD-37K

TLK-100

TLK-200

TLK-300

TLK-350

Compatibility Charts

AL-52

F

AL-53

TL-0

40

TL-4

137K

CTL

D-36

TLD-3

7

TLD-3

7K

TLK-1

00

TLK-3

00

TLK-3

50

1550

1551

2322

2326

2327

2850

A28

60

3093

3094

3095

3096

4010

4015

4055

4137

MO

6237

DLR

OiC

410

iC10

10ST

-990

1TI

N-7

D

Index

MAKE MODEL DESCRIPTION PAGEMTP 101 Voltage Detector 4MTP 110 GFI Receptacle Tester 8MTP 181-CB Circuit Tracer 14MTP 190-CBI Circuit Tracer 14MTP 1011 Pocket Anemometer 23MTP 1012 Pocket Thermo-Hygrometer 22MTP 1013 Pocket Sound Level Meter 24MTP 1014 Pocket Light Meter 25MTP 1015 Pocket Infrared Thermometer 21MTP 1020 Pocket Multimeter 5MTP 1025 Pocket Multimeter 5MTP 1032 Multifunction tester 6MTP 1210 Light Meter 25MTP 1320 Infrared Video Thermometer 20MTP 1321i Thermal Imager 20MTP 1324-RH Dew Point Scanner/Infrared Thermometer 20MTP 1325 Infrared Thermometer 19MTP 1328 Infrared Thermometer 19MTP 1329 Infrared Thermometer 19MTP 1368 Humidity and Temperature Meter 22MTP 1410 Moisture Meter 22MTP 1551 Automotive Multimeter 8MTP 1810 Sound Level Meter 24MTP 1890 Sound Level Calibrator 24MTP 2010 Thermo-Anemometer 23MTP 2020 Hot Wire Anemometer 23MTP 2326 Multimeter 6MTP 2327 Multimeter 6MTP 278 Non-Contact High Voltage Detector 4MTP 2850A TRMS Digital Multimeter 7MTP 2860 TRMS Industrial Multimeter 7MTP 3005D DC Regulated Power Supply 18MTP 3093 AC Clamp Meter 9MTP 3094 AC/DC Clamp Meter 9MTP 3095 TRMS AC Clamp Meter 9MTP 3096 TRMS AC/DC Clamp Meter 9MTP 310 Analog Multimeter 5MTP 3100 Electricity Consumption Monitoring System 26MTP 3100-18MM Clamp (18mm) 26MTP 3100-25MM Clamp (25mm) 26MTP 3100-T-25MM Clamp (25mm) and Transmitter 26MTP 3188CR-19M 19-Meter Cable with Reel 31MTP 3188CR-30M 30-Meter Cable with Reel 31MTP 3188DN Pipe Inspection Camera 30MTP 3188T-CAM Camera Head with Transmitter 31MTP 3188-CAM Camera Head 31MTP 3188-CAMADAPT Adaptor for Camera Head 31MTP 3188-MINI-CAM Flexible Camera Head 31MTP 3200 Power Quality Analyzer 11MTP 3200-CTC0080 Current Probe 11MTP 3200-CTC130 Current Probe 11MTP 3200-CTC1535 Current Probe 11MTP 3200-FLC8C-5A Current Probe 11MTP 3200-PY-5000A Current Probe 11MTP 3288-SKID Camera Skid Kit 31MTP 3488T Pipe Inspection Camera 30MTP 3488-512HZCAM Camera Head with Transmitter 31MTP 3588CR-45M 45-Meter Cable with Reel 31MTP 4010 Insulation Tester 12MTP 4015 Insulation Tester 12MTP 4055 Insulation Tester 12MTP 4137MO Milli-Ohmmeter 13MTP 5003 Power Supply Single Output 18MTP 5003-2 Power Supply Dual Output 18MTP 6237DLRO Micro-Ohmmeter 13MTP 6460 Laser Distance Meter 27MTP 7100 Lamp Tester 27MTP 7201 Temperature Calibrator 16MTP 7202 Thermocouple Calibrator 16MTP 7205 Loop Calibrator 16MTP 7214 Temperature Calibrator 17MTP 7215 V/mA Calibrator 17MTP 8010 Phase Sequence and Motor Detector 15MTP 9100 Refractometer 27MTP 9310 Manometer 23MTP AC-230 Alligator Clips 32MTP AC-280 Spring Wire Test Clips 32MTP AC-300 Alligator Clip Test Probes 32

MAKE MODEL DESCRIPTION PAGEMTP AC-320 Flat Head Alligator Clips 32MTP AC-45 Alligator Clips 33

MTP ADPTK Thermocouple Adaptor 35MTP AL-53 Test Leads 5-10kV 33MTP AL-52F Fused Test Leads 33MTP AT-8 Tachometer 15MTP BX-150 Dry-Well Temperature Calibrator 17MTP BX-500 Infrared Calibrator 18MTP CC10 Carrying Case 36MTP CC12 Carrying Case 36MTP CC40 Carrying Case 36MTP CC50 Hard Cover Carrying Case 36MTP CC80 Hard Cover Carrying Case 36MTP CC82 Hard Cover Carrying Case 36MTP CC85 Hard Cover Carrying Case 36MTP CC90 Hard Cover Carrying Case 36MTP CO-180 Carbon Monoxide Detector 25MTP GD-3300 Combustible Gas Leak Detector 25MTP IC410 AC/DC Clamp-On Adaptor 10MTP IC1010 AC/DC Clamp-On Adaptor 10MTP LS-100 Line Splitter 10MTP MS-2301 Ground Resistance Tester 15MTP MS-3400 Thermocouple 35MTP MS-5300 Multimeter 7MTP PD-28 High Voltage Probe 33MTP PM-15 Electricity Consumption Monitoring System 26MTP S104A Immersion Probe 34MTP S105A Immersion Probe 34MTP S106A Penetration Probe 34MTP S108A Airflow Probe 34MTP S109A Clamp-On Probe 34MTP S110A Surface Probe 34MTP S111A Surface Probe 34MTP S112A Surface Probe 34MTP SMPK-F Female Mini-Connector 35MTP SMPK-M Male Mini-Connector 35MTP ST-128M Pinless Moisture Meter 22MTP ST-171 Temperature & Humidity Recorder 21MTP ST-172 Temperature & Humidity Recorder 21MTP ST-175-CVS AC Voltage/Current Data Logger 8MTP ST-337 Mini AC/DC Clamp Meter 10MTP ST-805 Sound Level Meter 24MTP ST-9238B Digital Pocket Thermometer 21MTP ST-9901 Multi-Function Tester 27MTP TF-2808 Inspection Camera 29MTP TF-2809EX Inspection Camera 28MTP TF-2809X-3M 3-Meter Cable 29MTP TF-2809X-3MCAM 3-Meter Cable with camera 29MTP TF-2809X5.5MM Cable with Mini Camera Head 29MTP TF-3003BMPX Inspection Camera 28MTP TF-XC0580V 5-Meter Cable with Camera 29MTP TF-XC2080V 20-Meter Cable with Camera 29MTP TF-XCU0155V Rotating Camera Head 29MTP TIN7D Insulation Tester 13MTP TL-040 Connecting Leads 32MTP TL-4137KC kelvin Test Leads 33MTP TLD-36 Test Leads 33MTP TLD-37 Test Leads 33MTP TLD-37K Test Lead Kit 33MTP TLK-100 Automotive Test Lead Set 32MTP TLK-200 Industrial Test Lead Set 32MTP TLK-300 Electronic Test Lead Set 32MTP TLK-350 Electrical Test Lead Set 32MTP TP-190 Test Probes 32MTP TP-623 Test Probes 33MTP TPK Series Thermocouples 35MTP VT-6 Voltage Detector 4PATHFINDER PF-620 Breaker, Fault & Cable Locator 14RYCOM 8879 V3 Cable & Pipe Locating Kit 37RYCOM 8869 V3 Cable & Pipe Locating Kit 37RYCOM Stick V3 Locating Kit 37RYCOM 8810/8873 Locating Kit 37RYCOM MSL Ferromagnetic Locator 37RYCOM Staff Fault Finding Kit 37

NEW PRODUCTS

Power Quality Analyzer Electricity Consumption Monitoring System Pipe Inspection CameraPage 11 Page 26 Page 30

Cable and Pipe Locator Infrared Calibrator Thermal CameraPage 37 Page 18 Page 20

Test, Measurement & Control Equipment

Tel: 1-888-326-7167Fax: 1-888-326-7835Email: [email protected] www.mtpinc.com

www.trescal.com

© MTP Instruments, A Trescal CompanyProduct specifications are subject to change without notice.

Authorized MTP Distributor

General Catalogue Test, Measurement & Control Equipment › Promo › Pdf › MTP Catalogue...

Documents

Transcript of General Catalogue Test, Measurement & Control Equipment › Promo › Pdf › MTP Catalogue...