GE - Fagor Electrónica · PDF fileGE DTT receivers DTT ... DVB-S/S2 DVB-T...
Transcript of GE - Fagor Electrónica · PDF fileGE DTT receivers DTT ... DVB-S/S2 DVB-T...
1
PAGE
PAGE
DTT receivers
DTT RECEIVERS ................................... 62
Terrestrial antennas Satellite dishes Converters 1st IF SAT Line Amplifier
SIGNAL RECEPTION ............................ 2
8000 series headend 6000/7000 series headend Channel amplifier - NEXUM series Programmable amplifiers - MICROMATV series Headend multiband amplifiers Digital modulator Multiswitches
HEADENDS ............................................ 8
Filters Mast amplifiers Indoor amplifiers & modulators Distribution amplifiers
AMPLIFICATION .................................... 51
Tap-offs & splitters Outlet sockets Shielded diplexer Coaxial cables
DISTRIBUTION ...................................... 63
Connectors Amplifiers Attenuators 75 Ω loads Combiners & diplexers Filters DC injectors Weatherproof protectors
ACCESSORIES..................................... 73
Housings Cables Tools and accessories
OPTIC FIBRE........................................ 78
Splice box Cables Tools and accessories
UTP CAT 6............................................ 76
Technical Notes Index per model
TECHNICAL NOTES ............................ 80
G E N E R A LCATALOGUE
TV RECEPTION
2
TERRESTRIAL ANTENNAS
SIGNAL
RECEPTION
ANF BIII13ANF BIII9
6, 9 and 13 elements BIII antennas.
APPLICATIONTerrestrial TV installations, community and individual.
FEATURES Robust, strong antenna, made of aluminium. Waterproof connection box. F connectors. Quick installation.
Terrestrial antennas for analogue and digital DAB radio.
APPLICATIONCommunity and individual installations of digital and analogue radio reception.
FEATURES Made of aluminium. Waterproof connection box. F connectors. Quick installation. Omnidirectionals. ANF DAB: Antenna for digital radio reception.
ANF FM ANF FMS ANF DAB
ANF BIII Series
ANF RADIO Series
MODEL ANF BIII ANF BIII9 ANF BIII13
Reference 80021 80027 80028
Channels E05 ... E12
Nbr. of elements 6 9 13
Gain dB 7,5 10 12
Impedance Ω 75
Front-to-back ratio dB 18 22 30
Length mm 1220 1536 2074
Units per package 10 1 / 10 1 / 6
Dimensions of 950 x 120 x 70 1400 x 130 x 70packaging mm 1330 x 240 x 220
965 x 370 x 260 1425 x 270 x 230
Weight Kg 10,5 1,5 / 16 2 / 12,8
MODEL ANF FM ANF FMS ANF DAB
Reference 80024 80025 80026
Frequency range MHz 87,5 ÷ 108 193 ÷ 230
Gain dB 0
Impedance Ω 75
Polarization H H/V V
Packingdimensions (10 u.) mm 490 x 220 x 600 650 x 280 x 320 800 x 200 x 250
Weight (10 u.) Kg 7,2 6,8 6,1
3
DIGITAL TERRESTRIAL TV ANTENNA
SIGNAL
RECEPTION
OPTIMISED DIGITAL TV HDTV ANTENNA with high gain andexcellent mechanical resistance.
APPLICATIONDigital and analog TV reception for community and individual antennainstallations, some models totally adapted to the LTE environment.
FEATURES Modern, optimised design to achieve optimum gain/size ratio. Active/passive dipole. Self-adapting: provides a constant, balanced signal, minimizing loss and
maximizing adaptation. Light weight and robust, designed with state-of-the-art technology to guarantee
an excellent response and a long lifetime. High quality plastic with special UV protection. Easy installation, in just 3 clicks, no tools needed. Compact, small-sized single-unit packing. Simple, ergonomic mast fixing system to guarantee secure mounting.
Rhombus Series
ACTIVE/PASSIVEDIPOLE- 100%
SEALED
SELF-ADAPTING LTE MAXIMUMPROTECTION
HIGHRESISTANCE
NEW MASTFIXING SYSTEM
EASYINSTALLATION
COMPACTSINGLE-UNITPACKAGING
LIGHTWEIGHT,BUT ROBUST
GAIN RESPONSE
21 25 30 35 40 45 50 55 60
dB 40.0
35.0
30.0
25.0
20.0
15.0
10.0
5.0
Rhombus 17 dB
Rhombus active 34 dB
Click ! Click ! Click !
MODEL
Reference
Channels
Gain dB
Power supply Vdc
Current drawn mA
Horizontal opening angle at -3dB º<)
Back-to-front ratio dB
Length mm
Windload 130 km/h N160 km/h
Units per package
Package dimensions mm
Operating temperature range ºC
Weight Kg
rhombus rhombus 5 rhombus P rhombus 5 P
84390 84391 84393 84392
21-60
17 (34 active) 17
12-24 —
45
36
25
980
6592
1 5 1 5
600 x 375 x 170 600 x 400 x 690 600 x 375 x 170 600 x 400 x 690
–20 ÷ 60
2,15 10 2,15 10
4
DIGITAL TERRESTRIAL TV ANTENNA UHF
SIGNAL
RECEPTION
SeriesDigit
HORIZONTAL OPENING DIAGRAM
90° 90°
60°60°
30° 30°0 dB
-10
-20
UHF antenna which offers high gain and great mechanical resistance.
APPLICATIONDigital and analogue TV reception in individual and community installlations.
FEATURES Compact and resistant with strong, undeformable clip. It has stud bolts to avoid being lost or dropped during assembly operations. Immune to most interference generated by different sources. It has an F connector which gives it high shielding.
GAIN RESPONSE
dB 16
15
14
13
12
11
10
9
21 25 30 35 40 45 50 55 60 65 69
MODEL Digit 25 LTE Digit 25 LTE 6u
Reference 84374 84366
Channels 21 ... 60
Gain dB 13
Impedance Ω 75
Return losses dB 10
Front-to-back ratio dB 24
Horizontal opening angle at -3 dB º<) 36
Length mm 1006
Windload 130 km/h N 65150 km/h 92
Units per package 1 6
Packing dimensions mm 1015 x 350 x 65 1030 x 370 x 355
Weight Kg 1,45 10,7
SATELLITE
SIGNAL
RECEPTION
5
Satellite dishes manufactured of electro zinc-coated steel with apolyester coating ensuring high level of resistance to weatherconditions.
APPLICATIONSuitable for community and individual Satellite TV installations. Available a widerange of diameters according to the size of the installation.
FEATURES The parabolic reflectors are designed to achieve high gain. Pole or wall mounting.
DISHES
MODEL PO 064 PO 081 DPO 105*
Reference 86064 86081 86105Diameter cm 51 x 57 73 x 80 91 x 100
Focal distance cm 32,7 46,8 58,3
Type of reflector Offset
Material Electro zinc-coated steel
Coating Polyester
Type of fixing Floor / Wall / Pole Mast
Mast diameter mm 30 ÷ 60 30 ÷ 60 30 ÷ 60
Elevation º<) 17 ÷ 55 17 ÷ 55 – 5 ÷ 82
Offset angle º<) 19
Azimut º<) 180
LNB fixing Ø mm 25 ÷ 40
Frequency range GHz 10 ÷ 12,75
Gain (11,7 Ghz) dB 35 38 39,2
Efficiency % >60
Beam width (– 3 dB) º<) 2,8 2,4 2,1
F/D relation 0,64Operating: up to100 km/hWind speed Maximum: up to 130 km/h
Packing dimensions mm 610 x 610 x 110 830 x 840 x 120 1020 x 1000 x 120
Weight Kg 5 9 10
* Pole not included. See accessories.
MODEL PO 120 PO 140
Reference 86082 86083
Diameter cm 1100 x 1200 1360 x 1250
Focal distance cm 71 80
F/D Ratio 0,64 0,64
Efficiency % >70 >70
Reflector material Electrozinc coated Steel
Offset angle 22º 27º
Gain @ 10,7 GHz dBi 40,8 41,8
Gain @ 11,7 GHz dBi 41,5 42,5
Gain @ 12,7 GHz dBi 42,0 43,2
Elevation 5º ÷ 55º 15º ÷ 60º
Azimuth 22º
6
SATELLITE
SIGNAL
RECEPTION
Kits composed of Offset satellite dishes manufactured of eletro-zinccoated steel with a polyester coating and LNB converters.
APPLICATIONSuitable for community and individual satellite TV installations.
FEATURES The parabolic reflectors are designed to achieve high gain, guaranteeing great
strength and mechanical resistance. Easy fitting system. Universal LNB: low noise figure and high gain.
SATELLITE DISH + LNB Kits
MODEL KIT PO 064 KIT PO 081
Reference 86164 86181Packing dimensions (4 u.) mm 630 x 605 x 113 850 x 844 x 125Weight (4 U.) Kg 14,7 17SATELLITE DISHDiameter cm 51 x 57 73 x 79Focal distance cm 32,7 53Type of reflector OffsetMaterial Electro zinc-coated steelCoating PolyesterMast diameter mm 30 ÷ 60Elevation 10º ÷ 90ºOffset angle 28º 26ºAzimut 360ºFrequency GHz 10,7 ÷ 12,75Gain @10,7 GHz dBi 33,5 35.9Gain @11,7 GHz dBi 34,8 37.4Gain @12,7 GHz dBi 35,4 38.0Efficiency % > 70F/D relation 0,64
Wind speed Operating: up to 130 Km/hMaximum: up to 150 Km/h
Universal LNBNumber of inputs 1Polarity VL, HL, VH, HH
Input frequency GHz Low Band 10,7 ÷ 11,7High Band 11,7 ÷ 12,75
Oscillator frequency GHz Low Band 9,75 High Band 10,60
Output frequency range MHz Low Band 950 ÷ 1950High Band 1100 ÷ 2150
Noise figure at 20º C dB 0,2Conversion gain dB 50 ÷ 65 (typical 55)Output level (1 dB of compression) dB > 0 (typical 5)Power supply V 11,5 ÷ 14 (V); 16 ÷ 19 (H)22 KHz tone 0,6 Vpp ± 0,2 for High bandConsumption mA < 150Output connectors F (f)Operating temperature range ºC – 25 ÷ + 60
7
CONVERTERS
SIGNAL
RECEPTION
MODEL LNB 201 Universel LNB 222 TWIN LNB 244 QUAD LNB 248 Octo
Reference 86129 86132 86134 86138
Number of outputs 1 2 4 8
Polarity VL, HL, VH, HH
Low band 10,7 ÷ 11,7Input frequency GHzHigh band 11,7 ÷ 12,75
Low band 9,75 ± 2 MHzOscillator frequency GHzHigh band 10,60 ± 2 MHz
Low band 950 ÷ 1950Output frequency range MHzHigh band 1100 ÷ 2150
Noise figure at 20º C dB 0,2
Cross polarity rejection dB 25 25
Conversion gain dB 50 ÷ 65 (typical 58)
Output level (1dB of compression) dBm >0
Power supply V 11,5 ÷ 14 (V); 16 ÷ 19 (H) 11,5 ÷ 19
22 KHz tone 0,6 Vpp ± 0,2 for High band —
Consumption mA <200 <300 215
Output connectors F (f)
Operating temperature range ºC – 25 ÷ + 60
Packing dimensions mm 85 x 110 x 60 100 x 125 x 60 120 x 125 x 65 90 x 110 x 130
Weight Kg 0,110 0,190 0,235 0,315
Universal LNB for the satellite TV signal reception
FEATURES Stand out for their low noise figure and high gain which together with Offset
type satellite dishes make it possible to obtain merit factors ideal for collectiveinstallations.
Big Cross Polarity Rejection: 25 dB.
MODEL LNB 281 Monoblock Single LNB 182 Monoblock TWIN LNB 184 Monoblock QUAD LNB 204 Quattro
Reference 86135 86136 86137 86131
Number of outputs 1 2 4
Polarity VL, HL, VH, HH Astra - Hotbird separate 6º VL HL VH HH
Low band 10,7 ÷ 11,7Input frequency GHzHigh band 11,7 ÷ 12,75
Low band 9,75 ± 2 MHzOscillator frequency GHzHigh band 10,60 ± 2 MHz
Low band 950 ÷ 1950Output frequency range MHzHigh band 1100 ÷ 2150
Noise figure at 20º C dB 0,2
Cross polarity rejection dB 25 —
Conversion gain dB 50 ÷ 65 (typical 58)
Output level (1 dB of compression) dBm >0
Power supply V 11,5 ÷ 14 (V); 16 ÷ 19 (H) 11,5 ÷ 19
22 KHz tone 0,6 Vpp ± 0,2 for High band —
Consumption mA <200
Output connectors F (f)
Operating temperature range ºC – 25 ÷ + 60
Packing dimensions mm 110 x 90 x 130 110 x 120 x 130 110 x 120 x 130 110 x 125 x 60
Weight Kg 0,315 0,555 0,570 0,235
LNB Series
8
DVB-S/S2 DVB-T TRANSMODULATOR
HEADENDS
CAM slot
Operator´s Smart Card
Digital/digital transmodulation of a transponder on the 1st IFSatellite band (950 ÷ 2150 MHz) modulated in QPSK or 8PSK to achannel modulated in COFDM on the 47 ÷ 862 MHz band.De-encyrption of one or more services when CAM+Smart Card areinserted (CI model).
APPLICATION8000 Series XPSK/COFDM processing. It allows receiving Satellite TVprogrammes in the original format (SD, HD, Subtitling…) directly through DTTreceivers embedded in SD, HD Ready and Full HD screens or through astandalone DTT receiver.FEATURES Selection of services of interest at the output, adapting the transport stream. Output mux free capacity measurement in order not to exceed it. Opening of the scrambled services with the CI models. The Twin model allows
opening services from both inputs. Transport Stream processing:
DVB-SI table regeneration: table version edition. Nit table regeneration in the module and installation levels. Transport Stream parameters edition: tsid, onid. Service parameters edition: name and service identifier (SID). Network parameters edition: name and network identifier (NID). LCN (Logic Chanel Number) edition. PID filtering, for eliminating the not interesting PID or fixing a PID Audio.
Transport Stream frame correction and output MER regeneration. Upgradable software through control unit MCU/LPU.
MODEL STT-TWIN 8000 STT-TWIN-CI 8000 STT 8000 STT-CI 8000
Reference 08275 08276 08280 08281
INPUT
Multiplex number 2 (loop or independent) 1
Frequency band MHz 950 ÷ 2150
Input level dBµV 40 ÷ 86
Modulation type QPSK - 8PSK
Symbol rate Mbaud 1 ÷ 45
Through losses dB < 2
LNB control 22 KHz 13/17 V or DiSEqC 1.2
OUTPUT
Multiplex number Selectable 2 or 1 1
Frequency band MHz 47 ÷ 862
COFDM modulation type 2K; 8K
Modulation parameters DVB-T
Output constellation QPSK, 16 QAM, 64 QAM
MER dB > 38
Output level dBµV 78 80
Regulation of output level dB 15
CAM module (not included) NoAccording to Norm
NoAccording to Norm
DVB-CI EN 50221 DVB-CI EN 50221
CAM module current drawn — 5V-250 mA — 5V-250 mA
Programming UCF 300 / PC (with MCU/LPU 8000)
Packing dimensions mm 265 x 195 x 40
Weight Kg 1,33
Supply voltage V 5 12 17 30
Current drawn STT (CI) mA 720 (850) 375 20 2
Current drawn STT-TWIN (CI) mA 860 420 20 2
Total Power without CAM W 9,5 (STT) / 9.75 (STT-TWIN)
Operating temperature range ºC 0 ÷ 45
SeriesSTT 8000
9
DVB-T/T2 DVB-T TRANSMODULATOR
HEADENDS
Transmodulation from one or two DVB-T/T2 multiplexes to one ortwo DVB-T output multiplexes in the RF band (47÷862 MHz).Regeneration of those multiplexes contains.
APPLICATIONIdeal for it use in hotel, hospital and public buildings installations and small CATVnetworks, for the distribution through a single cable of digital terrestrial signalsmodulated in DVB-T2. The Common Interface models (8291 and 8293) allowopening scrambled signals using CAM modules with cards with the rights.
FEATURES Selection of services of interest at the output, adapting the transport stream. Output mux free capacity measurement in order not to exceed it. Opening of the scrambled services with the CI models. The Twin model allows
opening services from both inputs. Transport Stream processing:
DVB-SI table regeneration: table version edition. Nit table regeneration in the module and installation levels. Transport Stream parameters edition: tsid, onid. Service parameters edition: name and service identifier (SID). Network parameters edition: name and network identifier (NID). LCN (Logic Chanel Number) edition. PID filtering, for eliminating the not interesting PID or fixing a PID Audio.
Transport Stream frame correction and output MER regeneration. Upgradable software through control unit MCU/LPU.
MODEL TTT 8000 TTT-CI 8000 TTT-TWIN-CI 8000
Reference 08290 08291 08293
INPUT
Multiplex number 1 2
Standard DVB-T (EN 300744) DVB-T/T2 (EN 302755)
Frequency band MHz 174 ÷ 862 (∆ = 166 KHz)
Input level dBµV 40 ÷ 90 47 ÷ 90
Input loop through losses dB ±1 <1.5
TRANSPORT STREAM PROCESSING
Conditional access NO SI (DVB-CI: EN 50221)
Table processing PAT, CAT, PMT, SDT, NIT, EIT, BAT, TDT/TOT
Parameter edition tsid, onid, sid, nid, service_name, network_name, LCN
OUTPUT
Multiplex number 1 2
Standard DVB-T (EN 300744)
Bandwidth MHz 6, 7, 8
MER dB > 38
RF OUTPUT
Frequency Band MHz 50,5 ÷ 858 (∆ = 166 KHz)
Output level dBµV 65 ÷ 80 (∆ = 0,5 dBµV) 65 ÷ 78 (D=0,5 dBµV)
Output loop through losses dB < 1,5
Spurious in band dBc < - 54
Dimensions mm 265 x 195 x 40
Weight Kg 1,33
TTT 8000
Supply voltage V 5 12 30
Current drawn TTT / TTT-CI mA 600 / 730 375 2
Current drawn TTT TWIN-CI mA 900 450 2
Total Power without CAM W 7.5 (TTT), 8(TTT- CI) / 10 (TTT-TWIN- CI)
Operating temperature range 0 ÷ 45º C
CAM slot
Operator´s Smart Card
Series
10
DVB-S/S2 DVB-C TRANSMODULATOR
HEADENDS
SeriesSCT 8000
Module for processing a DVB-S/S2 multiplex, selection of servicesof interest with / without Conditional Access and conversion to achannel under DVB-C standard. It corrects the transport streamerrors. De-encryption of one or more services when CAM and cardare inserted (CI model).
APPLICATIONThe main function of the SCT 8000 is to receive a DVB-S/S2 transponder, selectcertain services - including conditional access services, opening rights (SCT-CImodel) - and modulating them into a DVB-C transponder to the desired frequencyand with an optimal MER for distribution.
FEATURES Selection of services of interest at the output, adapting the transport stream. Output mux free capacity measurement in order not to exceed it. Opening of the scrambled services with the CI models. The Twin model allows
opening services from both inputs. Transport Stream processing:
DVB-SI table regeneration: table version edition. Nit table regeneration in the module and installation levels. Transport Stream parameters edition: tsid, onid. Service parameters edition: name and service identifier (SID). Network parameters edition: name and network identifier (NID). LCN (Logic Chanel Number) edition. PID filtering, for eliminating the not interesting PID or fixing a PID Audio.
Transport Stream frame correction and output MER regeneration. Upgradable software through control unit MCU/LPU.
MODEL SCT-TWIN 8000 SCT-TWIN-CI 8000 SCT 8000 SCT-CI 8000
Reference 08272 08273 08270 08271
INPUT
Multiplex number 2 (loop or independent) 1
Frequency band MHz 950 ÷ 2150
Input level dBμV 40 ÷ 86
Modulation type QPSK - 8PSK
Symbol rate Mbaud 1 ÷ 45
Through losses dB < 2
LNB control 22 KHz 13/17 V or DiSEqC 1.2
Conditional access No According to norm DVB-CI EN 50221 No According to norm DVB-CI EN 50221
TRANSPORT STREAM
PCR correction sí
Table processing PAT, CAT, PMT, SDT, NIT, EIT, BAT, TDT/TOT
LCN insertion sí
PID filtering sí
OUTPUT QAM MODULATION
Modulation parameters DVB-C
Symbol rate Mbaud 1 ÷ 6,96
QAM order 16, 32, 64, 128, 256
MER dB >38
RF OUTPUT
Number of channels 15
Frequency band MHz 47 ÷ 862 (∆= 166 KHz)
COFDM modulation dBμV 65 ÷ 78 (∆ = 0,5 dBμV) 65 ÷ 80 (∆ = 0,5 dBμV)
Spurious in band dBc -54
CAM module current drawn – 5V-250 mA – 5V-250 mA
Programming UCF 300 / PC (with MCU/LPU 8000)
Dimensions mm 265 x 195 x 40
Weigh Kg 1,33
Supply voltage V 5 12 17 30
Current drawn SCT (CI) mA 720 (850) 375 20 2
Current drawn SCT-TWIN (CI) mA 860 420 20 2
Total Power without CAM W 9,5 (STT) / 9.75 (SCT-TWIN)
Operating temperature range ºC 0 ÷ 45
CAM slot
Operator´s Smart Card
11
HEADENDS
DVB-T/T2 DVB-C TRANSMODULATOR
Module for processing a DVB-T multiplex, selection of services ofinterest with / without Conditional Access and conversion to achannel under DVB-C standard. It corrects the transport streamerrors. De-encryption of one or more services when CAM and cardare inserted (CI model).
APPLICATIONThe main function of the TCT 8000 is to receive a DVB-T transponder, selectcertain services – including conditional access services, opening rights (TCT-CImodel) – and modulating them into a DVB-C transponder to the desired frequencyand with an optimal MER for distribution.
FEATURES Selection of services of interest at the output, adapting the transport stream. Output mux free capacity measurement in order not to exceed it. Opening of the scrambled services with the CI models. The Twin model allows
opening services from both inputs. Transport Stream processing:
DVB-SI table regeneration: table version edition. Nit table regeneration in the module and installation levels. Transport Stream parameters edition: tsid, onid. Service parameters edition: name and service identifier (SID). Network parameters edition: name and network identifier (NID). LCN (Logic Chanel Number) edition. PID filtering, for eliminating the not interesting PID or fixing a PID Audio.
Transport Stream frame correction and output MER regeneration. Upgradable software through control unit MCU/LPU.
MODEL TCT 8000 TCT-CI 8000 TCT-TWIN-CI 8000
Reference 08260 08261 08263
INPUT
Multiplex number 1 2
Standard DVB-T (EN 300744) DVB-T/T2 (EN 302755)
Frequency band MHz 174 ÷ 862 (∆ = 166 KHz)
Input level dBµV 40 ÷ 90 47 ÷ 90
Input loop through losses dB ± 1 < 1.5
TRANSPORT STREAM PROCESSING
Conditional access NO SI (DVB-CI: EN 50221)
Table processing PAT, CAT, PMT, SDT, NIT, EIT, BAT, TDT/TOT
Parameter edition tsid, onid, sid, nid, service_name, network_name, LCN
OUTPUT
Multiplex number 1 2
Standard DVB-C
Symbol rate Mbaud 1 ÷ 6,96
Order QAM 16,32,64,128,256
MER dB > 38
RF OUTPUT
Frequency band MHz 50,5 ÷ 858(∆=166 KHz)
Output level dBµV 65 ÷ 80 (D=0,5 dBµV) 65 ÷ 78 (D=0,5 dBµV)
Output loop through losses dB < 1,5
Spurious in band dBc < -54
Dimensions mm 265 x 195 x 40
Weight Kg 1,33
SeriesTCT 8000
CAM slot
Operator´s Smart Card
Supply voltage V 5 12 30
Current drawn TCT/TCT CI mA 580/710 340 2
Current drawn TCT TWIN-CI mA 900 450 2
Total Power without CAM W 7.5 (TCT), 8 (TCT-CI), 10 (TCT-TWIN-CI)
Operating temperature range ºC 0 ÷ 45
12
A/VASI DIGITAL ENCODER
HEADENDS
DEN 8000
MODEL DEN 8000
Reference 08200
INPUT
Video format 4 x CVBS
Video Standard PAL, NTSC
Video connectors BNC, 75 Ohm
A/V connectors 3 RCA / BNC
Input audio 1 x Stereo / 2 x Mono
OUTPUT
Standard DVB-ASI
ASI connectors 2xBNC, 75 Ohm
Video encoding MPEG-1, MPEG-2 MP@ML
Bit Rate vídeo Mbps 1-15
Video format Full D1, Half D1, SIF
Audio encoding MPEG-1 Layer1, Layer 2
Sample Rate audio 32, 44.1, 48
Packing dimensions mm 580 x 580 x 135
Weight kg 6,2
Supply voltage 90 ÷ 250 V
Power consumption 25 W
Operating temperature range 0 ÷ 45º C
APPLICATIONIt is used to watch the content of several analogue sources, such as surveillancecameras or DVD players, among others, on a TV equipped with a DTT receiver.
FEATURES Multiplexer function for up to 4 analogue A/V sources (PAL, NTSC). MPEG-2 MP@ML output video encoding, bit rate 1-15 Mbps. MPEG-1 Layer 1, Layer 2 audio encoding. Programming via front panel (keyboard + LCD display) or PC (local or remote). Mountable in 19” rack. Includes:
- 4 x 3RCA-3BNC cables for 4 analogue A/V sources.- 1 x BNC-F(m) cable for one COFDM output.- 1 x user's manual.- 1 x 230Vac cable.
The HAN 8000 encoder modulates, the content of 4 HDMI input(MPEG-4 AVC/H.264 HD) signals to a DVB-ASI or IP output.
APPLICATIONIt is used to watch the content of several HD digital sources, such as satellitereceivers, DVD or Blue-ray players, etc , on a TV equipped with a DTT receiver.
FEATURES Multiplexer function for 4 HDMI inputs (MPEG-4 AVC/H.264 HD). Supports HDCP. MPEG-1 Layer 1, Layer 2 audio encoding. Programming via front panel (keyboard + LCD display) or PC (local or remote). Mountable in 19” rack. Includes:
- 1 x BNC-F(m) cable for one COFDM output.- 1 x user's manual.- 1 x 230Vac cable.
HAN 8000
HDMI ASI / IP DIGITAL ENCODER
Supply voltage 90 ÷ 250 V
Power consumption 25 W
Operating temperature range - 0 à 40 ºC
MODEL HAN 8000
Reference 08205
VIDEO ENCODER H.264/AVC High Profile Level 4.0 (HD)
INPUT HDMI x 4 + ASI
1920*1080_60P, 1920*1080_50P;Resolution 1920*1080_60i, 1920*1080_50i;
1280*720_60p, 1280*720_50P
AUDIO ENCODER MPEG1 Layer II
Sample rate KHz 34/44,1/48
Bit rate Kbps 128, 160, 192, 224, 256, 320, 384
ASI OUTPUT DVB-ASI
Connector 2 x BNC, 75 Ohm
IP OUTPUTIP/UDP (TS over IP);
MOTPS/SPTS/Unicast/Multicast
Connector RJ-45
Output bit rate Mbps 80 (4:2:0)
Programming Keyboard + LCD / NMS (Ethernet RJ-45)
Dimensions mm 580 x 580 x 135
Weight Kg 6,2
13
HEADENDS
DVB-S/S2A/VMPEG-4 DECODER
SRD 8000 is a quad DVB-S/S2 decoder that supports the MPEG-4and MPEG-2 video standards and the MPEG-1 audio encoding.It has 4 Audio/Video plus 4 HDMI outputs.FEATURES Support DVB-S/S2 input. Support HDMI and AV output. Support H.264/MPEG4 AVC and MPEG-2 video and MPEG-1 and AAC audio
coding. Support PAL/NTSC. Real-time monitoring of input and output signal. LCD/Keyboard control by front panel and network management by Ethernet.
MODEL SRD 8000
Reference 08210
Inputs 4 (female “ F” )
Frequency MHz 950÷2150
Max. input level dB 83
Modulation type QPSK, 8 PSK (DVB-S/S2)
LNB control 22 KHz 13/17 V
4 HDMI 1.4
Outputs 4 CVBS Video (BNC)4 Audio 1xStereo / 2xMono (BNC)
MPEG-2 SD 4:2:0 MP@ML
MPEG-4 AVC SD MP@L4Video decode mode MPEG-4 AVC HD [email protected]/[email protected]
MPEG-1 layer2/MP3
Dolby digital (AC-3): Dolby DigitalAudio decode mode Plus (E-AC-3)
MPEG-4 AAC7AAC Plus (HE-AAC v)
Supply voltage Vac 90÷250
Consumption W 25
Operating temperature range 0-45 ºC
Packing dimensions mm 580 x 580 x 135
Weight Kg 6,2
4 DVB-S/S2 (MPEG 4) TO ANALOGUE (PAL/SECAM)
SRD 8000 Series
Headend for distributing in PAL analogue modulation, up to 12 digital services from DVB-S/S2 satellite transponders.
REF MODEL UN08210 SRD 8000 318902 SM TWIN 8000 668001 SPS 8000 - LP 135083 SHA 8000 183814 PMD 800 683807 BA 807 183805 BST 807 184033 CMD 3 RCA 12
SHA8000
SPS8000
SRD 8000
SRD 8000
SRD 8000
SMTWIN8000
SMTWIN8000
SMTWIN8000
SMTWIN8000
SMTWIN8000
SMTWIN8000
Supply voltage V 5 12 17 30
Current drawn (8,4 W) mA 800 360 0 2
Operating temperature range 0 ÷ 45º C
14
ASI QAM DIGITAL MODULATOR
HEADENDS
Supply voltage V 5 12 17 30
Current drawn (6 W) mA 800 360 0 2
Operating temperature range 0 ÷ 45º C
APPLICATIONThe DMT 8000 digital modulator modulates theincoming MPEG-2 TS in DVBASI signal into aCOFDM channel.
FEATURES Indication of residual channel capacity. Regeneration of the Network Information Table
(NIT), either locally for each module or for theentire installation.
TS processing with LCN insertion, PCR restampingand TS remapping.
Program Selection.
APPLICATIONModulates the incoming MPEG-2 TS in DVB-ASIsignal into a DBV-C channel.
FEATURES Indication of residual channel capacity. Regeneration of the Network Information Table
(NIT), either locally for each module or for theentire installation.
TS processing with LCN insertion, PCR restampingand TS remapping.
Program Selection.
ACM 8000
MODEL ACM 8000
Reference 08202
INPUT
Standard DVB-ASI
Package length Automatic detection 188/204 Bytes
Input connector F(H)
TS PROCESSING
LCN insertion Yes
Operating modes Transparent / Re-multiplexer
OUTPUT QAM MODULATION
Standard DVB-C
Symbol rate Mbaud 1 ÷ 6,96
Order QAM 16, 32, 64, 128, 256
MER dB >38
Through losses dB 1,5
RF OUTPUT
Frequency band MHz 50,5 ÷ 858 (∆ = 166 KHz)
Output level dBµV 65 ÷ 80 (∆ = 0,5 dBµV)
Through losses dB < 1,5
Spurious in band dBc < - 54
Programming UCF 300 / PC (with MCU / LPU 8000)
GENERAL
Packing Dimensions mm 265 x 194 x 55
Weight Kg 1,33
MODEL DMT 8000
Reference 08201
INPUT
Standard DVB-ASI
Package length Automatic detection 188/204 Bytes
Input connector F(f)
TS PROCESSING
LCN insertion Yes
Operating modes Transparen t/ Re-multiplexer
OUTPUT
Standard DVB-T
Frequency band MHz 47-862
COFDM modulation 2K/8K
Constellation type QPSK/16-QAM/64-QAM
MER dB >38
Output level dBµV 80
Output level adjustment dB 15
Programming UCF 300 / PC (with MCU / LPU 8000)
Dimensions mm 265 x 195 x 40
Weight Kg 1,33
DMT 8000
ASIDVB-T DIGITAL MODULATOR
15
HEADENDS
VSB MODULATOR
SM 8000 / SM-ST 8000
Power supply voltage V 5 12 17 30
Model Mono Stereo Mono Stereo Mono Stereo Mono Stereo
Current drawn (mA) mA 270 350 400 0 0 5 5
Total power (Watt) 5,7(Mono) – 6,3(Stereo)
Operating temperature range 0÷45 ºC
Modulator with VSB output, that allows adjacent channel operation.A programmable output channel means that the modulator caneasily be inserted into the headend since it operates in any TVchannel (BI,BIII, “S” Bands and UHF). The stereo model includesSTERO/DUAL signals processing.
APPLICATIONAnalogue satellite TV community installations, where locally produced channelsinsertion is needed.
FEATURES It allows audio volume adjustment to equalise them to the level of other installed
programs. It also offers the possibility of fine tuning the output channel frequency to
disperse intermodulation products in installations with many channels. RF output signal ON/OFF switchable for analysis and headend adjustment. Incorporates test bars generator.
MODEL SM 8000 SM-ST 8000
Reference 19800 19801
Output connectors F(f)
Audio/video input connector MINI DIN 5
Audio Pre-emphasis µs 50
Video input level Vpp 0,9 ÷1,25 Vpp
Audio input level Vpp 0,5 ÷ 2,5 Vpp
Output channels VSB MHz 47 to 862
Output level (1*) dBuV >90 with 15 dB regulation
Spurious in channel (2*) dBc >50
Spurious in band (2*) dBc >56
C/N ratio (3*) dB In channel : >54In band for min. output level: >72
Carrier accuracy KHz ±30
Carrier stability KHz ±10
Output frequency resolution KHz 125
Video modulation depth % 85
Programming UCF 300 / PC (with MCU / LPU 8000)
Pv / Ps ratio adjustable dB 12/16
Standard TV PAL (B/G, I, D/K) / PAL B/G, SECAM B/GSECAM (L, D/K, B/G)
PV / PS separation MHz PAL (B/G:5,5, I:6,0., D/K:6,5) / SECAM (L:6,5, D/K:6,5, B/G:5,5)
Audio output modes Mono Stereo / Dual switchable (A/B B/A)
Packing dimensions mm 265 x 195 x 40
Weight Kg 1,33
16
TWIN VSB MODULATOR
HEADENDS
SM-TWIN 8000 / SM-TWIN-ST 8000SM-TWIN-W 8000
Twin modulator with VSB outputs, that allows adjacent channeloperation. A programmable output channel means that the modula-tor can easily be inserted into the headend since it operates in anyTV channel (BI,BIII, “S” Bands and UHF). The stereo model includesSTERO/DUAL signals processing.
APPLICATIONAnalogue satellite TV community installations, where locally produced channelsnsertion is needed.
FEATURES It offers the possibility of fine tuning the output channel frequency to disperse
intermodulation products in installations with many channels. RF output signal ON/OFF switchable for analysis and headend adjustment.
MODEL SM-TWIN 8000 SM-TWIN-ST 8000 SM-TWIN-W 8000
Reference 19802 19803 19807
Output connectors F(f)
Audio/video input connector MINI DIN 5
Audio Pre-emphasis µs 50
Video input level (75 ohm) Vpp 1
Audio input level (10 Kohm) Vpp 1
Output channels VSB MHz 47 a 862 (2 adjacent channels)
Channels bandwidth 7/8 (programmable) 8
Output level dBµV 86 with 15 dB regulation
Spurious in channel dBc 60
Spurious in band dBc 56
C/N ratio (8 modules) dB In channel: 56In band for min. output level: 63
Carrier accuracy KHz ±30
Carrier stability KHz ±10
Output frequency resolution KHz 125
Video modulation depth % 85
Vc / Ac ratio dB 15
Programming UCF 300 / PC (with MCU / LPU 8000)
TV Standard PAL B/G SECAM L, SECAM D/K, PAL I, PAL D/K
Vc / Ac separation MHz 5,5 PAL (I:6,0., D/K:6,5) /SECAM (L:6,5, D/K:6,5)
Audio output modes Mono Stereo / MonoDual switchable (A/B - B/A)
Packing dimensions mm 265 x 195 x 40
Weight Kg 1,0
Power supply voltage V 5 12 17 30
Model Mono Stereo Mono Stereo Mono Stereo Mono Stereo
Current drawn mA 570 590 330 350 0 2
Total power W 6,9(Mono) – 7,2(Stereo)
Operating temperature range 0÷45 ºC
17
HEADENDS
FM AMPLIFIER
RHA 8000
FM amplifier that allows radio signal FM & DAB processing incommunity headends.
APPLICATIONCommunity installations where FM & DAB radio signal distribution is needed.
FEATURES Incorporates an RF signal combiner with the FM/DAB signal. Allows selective attenuation of the FM signals by means of its selective Notch
Filters.
MODEL RHA 8000
Reference 35080
FM frequency range MHz 87.5 – 108
DAB frequency range MHz 195 – 223
RF frequency range MHz 47 – 862
FM gain dB >10
DAB gain dB >5
FM regulation dB 40±2
DAB regulation dB 20±2
Operative FM input level dBµV 60 – 100
Operative DAB input level dBµV 60 – 80
FM noise figure dB 7
DAB noise figure dB 6
FM output level DIN45004B(-35dBc) dBµV 80
DAB output level DIN45004B(-35dBc) dBµV 75
>10dB (1 filter)Selective attenuation (notch filters) dB >15dB (2 filters)
>19dB (3 filters)
Through losses RF dB < 1,5
Packing dimensions mm 265 x 195 x 40
Weight Kg 1,33
Supply voltage V 5 12 17 30
Current drawn (mA) 15 195 — <5
Total power (W) 2,5
Operating temperature range 0÷45 ºC
18
HEADEND AMPLIFIER
HEADENDS
Broadband Amplifiers for 8000 series headends. The SHA model is asingle input amplifier. The SAC Amplifier is a 4 input model tocombine and amplify up to 4 frames.
APPLICATIONTV community installations, both SMATV and CATV.
FEATURES They have gain regulation and a TEST output. Low noise figure and output level regulation. Screws and power supply cable included. Optimum frequency response. High dynamic threshold.
MODEL SAC 8000 SHA 8000
Reference 35081 35083
Nº inputs 4 1
Frequency band MHz 47-862
Input impedance Ohm 75
Gain dB 43
Regulation dB 20
Noise fugure dB 7
IM3 output leveldBµV 120(-60 dBc DIN 45004B)
Output level stability dB ± 2
Packing dimensions mm 265 x 195 x 40
Weight Kg 1,25
SHA-SAC 8000
SHA SAC
Supply voltage Vdc 5 12 5 12
Current drawn mA 20 (10W) 825 (10,3W) 20 (10W) 850 (10,3W)
Total power W 10 10,3
Operating temperature range 0 ÷ 45º C
12 MUX DVB-T output transmodulator headends. Through the use of a multiswitch, the headend can select any service availablein the polarities connected to the multiswitch.
REF MODEL UN86471 FMF 1712 108275 STT-TWIN-CI 8000 668000 SPS 8000 135083 SHA 8000 183814 PMD 800 683807 BA 807 183805 BST 807 1
SHA8000
SPS8000
STTTWIN8000
STTTWIN8000
STTTWIN8000
STTTWIN8000
STTTWIN8000
STTTWIN8000
SPS8000
FMF 1712
Example
19
HEADENDS
POWER SUPPLY
The SPS 8000 model is a multi-voltage power supply that can beconnected to a common power BUS shared with various powersupplies.
APPLICATIONPower supply for 8000 series headends, its capacity for sharing the load makesit suitable for redundant systems.
FEATURES Load sharing technology.
SPS 8000
Cable BF 800
VNT 807
CP 08
CP 08
CP 08
DEN 8000CP 08
VNT 807
Cable BF 800
Cable BF 800
SAC STT-CI STT-CI STT-CI STT-CI STT-CI MCU SPS
STT STT STT STT STT STTECU
SPS
SM SM SM SM SM DMTECU
SPS
STT STT STT TTT-CI TTT-CI TTT-CIECU
SPS
Example
MODEL SPS 8000 SPS-LP 8000
Reference 68000 68003 68001
Input voltage Vac 187 ÷ 264 195 ÷ 265
Output voltages Vdc 30 17 12 5 30 17 12 5
Max. current per output A 0,1 0,5 4 7,5 0,03 0,2 2,5 4
Output current drawn W 95 55
Packing dimensions mm 275 x 185 x 60 265 x 185 x 60
Weight Kg 1,5 1,4
RECOMMENDED LOAD LIMIT (SPS-LP): 55W
5 x STT + 2 LNB4 x STT + 3 LNB4 x STT + SHA + 1 LNB4 x STT-CI + 3 LNB4 x STT-TWIN + 2 LNB3 x STT-TWIN + SHA + 1 LNB4 x STT-TWIN-CI + 2 LNB3 x STT-TWIN-CI + SHA + 1 LNB4 x TTT-TWIN-CI5 x SM-TWIN-ST + SAC
20
HEADEND CONTROL WITH PCMASTER CONTROL UNIT
HEADENDS
MGG / MEG 8000
MCU-2G/ETHERNET-GATEWAY
MODEL MEG 8000 MGG 8000Reference 85117 85118
USB USB 2.0 OTG
Interfaces ETHERNET 10/100 Base-T RJ45
SIM — SIM Card interface 1.8V/3V
Antenne GSM — FME 3m GSM5 antenna included
UMTS/HSPA+ —Five-Band
3G router800/850/900/1900/2100MHz
GSM/GPRS/EDGE —GPRS class 12 Quad band 850/900/1800/1900MHz
AC input VAC 90 a 264 (adapter included)DC input VDC 24V (7 à 50VDC)Dimensions mm 201 x 163 x 98Operating temperature range ºC -40ºC to +85ºCWeight Kg <0,5
Control Unit for the permanent supervision ofthe headend.
FEATURES Configuration of the headend through the USB port
on a PC. Upgrading of the firmware. Monitoring of the main parameters. Diagnosis of the headend.
MCU 8000 / ECU 8000
Extension unit, that in combination with theMaster Control Unit allows a permanentsupervision of the headend (1 ECU x frame).
FEATURES Configuration of the headend through the USB
port on a PC. Upgrading of the firmware Monitoring of the main parameters. Diagnosis of the headend.
MODEL MCU 8000 ECU 8000
Reference 85110 85114
Local communication with PC USB 2.012 Mbps
Com. with processing module BUS CAN 1 Mbps
Packing dimensions mm 270 x 195 x 40
Weight Kg 1,50
The 8000 series headend can be programmed remotely throughEthernet router (MEG 8000) or 2G/3G modem (MGG 800) plus a LPU8000 or MCU 8000 unit.FEATURES Internal configuration web server. Remote firmware update. DHCP server (for Ethernet and Wi-Fi interfaces). 3G supervision to keep the connection always active.
MCU 8000 ECU 8000
Supply voltage Vdc 5 12
Current drawn mA 260 160
Operating temperature range 0 ÷ 45 ºC
21
HEADENDS
PORTABLE CONTROL UNIT
MODEL LPU 8000
Reference 85116
Local communication with PC USB 2.012 Mbps
Com. with processing module BUS CAN 1 Mbps
Packing dimensions mm 270 x 195 x 40
Weight Kg 1,50
Portable control unit for local programming via PC of a 8000 seriesheadend.
FEATURES Software and firmware upgrading. Main parameters control. Headend setting up through the USB port of a PC.
LPU 8000
Supply voltage 5 Vdc
Current drawn 260 mA
Operating temperature range 0 ÷ 45º C
SAT
SHA STTTWIN
STTTWIN
STTTWIN
STTTWIN
TTTTWIN
TTTTWIN
SPS
USB-B/USB-A
USB-A/USB-A
Example
LPU 8000
22
8000 SERIES
HEADENDS
ACCESSORIES
COMMUNICATION BUSBETWEEN MODULES
COMMUNICATION BUSBETWEEN FRAMES 120 OHMS USB LOAD
APPLICATION MOD. REF.
PC programming USB 800 83811
APPLICATION MOD. REF.
7 modules + power supply BA 807 83807
POWER BUS
APPLICATION MOD. REF.
PC programming USB 801 83812
APPLICATION MOD. REF.
19” rack frame CP 08 83817
PASSAGE COVER BETWEEN FRAMES
APPLICATION MOD. REF.
8000 Series CU 120 83813
APPLICATION MOD. REF.
8000 series PMD 800 83814
RF BRIDGE
TYPE OF CONNECTOR MODEL REF.
MINI DIN 5 / 3 RCA CDM 3 RCA 84033
MINI DIN - 3RCA CABLE
APPLICATION MOD. REF.
19” rack BF 800 83810
POWER SUPPLY BUS
CC 08 CC FR 08
APPLICATION MOD. REF.
CC 08 8380319” rack frame
CC FR 08 83816
19” RACK BLIND COVERS
APPLICATION MOD. REF.
8000 series &UCF 300 85115
MicroMATV Evo
CONTROL UNIT
23
HEADENDS
8000 SERIES
APPLICATION MOD. REF.
Frame without housing VNT 800 83818
APPLICATION MOD. REF.
7 modules + power supply BSR 807 83800
19" RACK FRAME
19" RACK VENTILATION UNIT
Designed for mounting the 8000 series moduleson 19" rack.Dimensions: 485 x 185 x 265 mm.
APPLICATION MOD. REF.
7 modules + power supply CFR 807 83806
VENTILATED HOUSING
Designed for wall mounting. Includes all necessaryaccessories. Ventilation unit and 3 power socket.With safety lock.Dimensions: 515 x 250 x 370 mm.Weight: 6,9 Kg.
Designed for installation on BST 807 frame.Dimensions: 160 x 135 x 50 mm.Supply voltage: 230 V / 200 mA.Weight: 0,8 Kg.
APPLICATION MOD. REF.
19” rack VNT 807 83801
VENTILATION UNIT
Designed for installation on 19" rack.Dimensions: 485 x 285 x 45 mm.Supply voltage: 230V / 200 mA.
APPLICATION MOD. REF.
7 modules + power supply BST 807 83805
FRAME
Designed for installation and protection of the 8000series headend. Includes all necessary accessoriesfor wall mounting.Dimensions: 450 x 15 x 170 mm.Depth with modules: 200 mm.
19” RACK ADJUSTMENT PLATES ON CAM 08 CAF 08
CAM 08: for module.CAF 08: for power supply. APPLICATION MOD. REF.
CAM 08 8380219” rack
CAF 08 83804
ACCESSORIES FOR WALL MOUNTING
ACCESSORIES FOR RACK 19” MOUNTING
24
8000 SERIES
HEADENDS
APPLICATION EXAMPLES
Example
BSR 807 (ref: 33800)
USB 800
PMD 800
BA 807
CAF 08
CAM 08
Example
Headend for the distribution up to 20 channels coming from different sourcessuch as DVD or Blue Ray players , CCTV cameras, or STB receivers.The input signal can be analogue (composed video) or digital HDMI input.
REF MODEL UN08200 DEN 8000 108205 HAN 8000 408201 DMT 8000 535083 SHA 8000 168000 SPS 8000 185110 MCU 8000 185118 MGG 8000 183801 VNT 807 183802 CAM 08 783804 CAF 08 183814 PMD 800 683811 USB 800 783813 CU 120 183807 BA 807 183800 BSR 807 184019 CX 75 F 6
SHA8000
DMT8000
DMT8000
DMT8000
DMT8000
DMT8000
MCU8000
SPS8000
VNT 807
MGG 8000
HAN 8000
HAN 8000
HAN 8000
HAN 8000
DEN 8000
CCTV
DVD
IRD SAT
CAMARA
(ref: 83802)
(ref: 83804)
(ref: 83811)
(ref: 83807)
(ref: 83814)
25
SAT TO IP STREAMER
HEADENDS
These devices take services from satellite transponders and afterselecting them, transmit them in IP packages for their distributionin an Ethernet network. The Common Interface models allow todecrypt scrambled services using CAM’s and cards with rights.
FEATURES The metal case is ready for the 19” rack mounting and has the possibility of
adding ventilation fans. Each module has two independent streaming outputs with a capacity of more
than 12 services each one. The modules are programmable through its web server locally or in remote
mode. PID filtering. Possibility of creating services mixing Audio PID’s with Video PID’s. For instance,
two services with the same video but with audio in two different languages.
IPolo Series
MODEL SIT 402 SIT 422
Reference 8240 8241
INPUT
Inputs 4
Standard DVB-S2 (EN 302 307) / DVB-S (EN 300 421)
Frequency MHz 950 ÷ 2150
Input level dBµV 47 ÷ 86
Baud rate MBps 1÷45 (DVB-S2) / 1÷62 (DVB-S)
FEC mode LDPC+BDH (DVB-S2) / QPSK (DVB-S)
Code rate 1/2, 2/3, 3/5, 3/4, 4/5, 5/6, 7/8, 8/9, 9/10
Roll off 0.15, 0.20, 0.25, 0.35
LNB control 22 KHz 13/17 V or DiSEqC 1.0
DVB-SI AND TS PROCESSING
Conditional Access NO DVB-CI: EN 50221
Table Processing PAT, PMT, SDT, NIT, BAT, RST, PID filtering, Service creation
Output format SPTS/MPTS
OUTPUT
Number 2 independent
Physical Standard Ethernet 100-BaseT over RJ-45 (IEEE 802.3u)
TCP/IP Streaming protocol RTP/UDP/IP multicast
Signalling protocols SAP
CONTROL INTERFACE
Physical Standard Ethernet 1000-BaseT over RJ-45
Protocol Web server
SM 7000+SM 6000+
SM 7000+ STSM 6000+ ST
Modulator with VSB output, that allows adjacentchannel operation.A programmable output channel means that themodulator can easily be inserted into the headendsince it operates in any TV channel (BI, BIII, “S” Bandsand UHF).
CIF 7000
Channel converter via IFREF.:07426
CIF 6000
REF.:06426
Channel to channel Converter with processing via IF.Allows to change frequencies, without modifying thecontent of the base band signal. Adjacent input and output channel operation.
Twin Converter which converts 1st IF SAT signal to bedistributed through just one cable. Each IFL unit has atwin conversion module to independently process 2transponders. Designed for processing Analogue andDigital TV. Can be operated with adjacent transponders,both at input and output.
Power Supply that provides the operating voltage forall modules of the Multi-Processing system.
The TDM 6000 / TDM 7000 transmodulator convertsa TV or radio channel with COFDM modulation on aterrestrial digital television multiplex into a VHF/UHFchannel with standard PAL modulation. The stereomodel includes two audio carriers for STERO/DUALsignals processing.
Headend amplifier that amplifies the 1st IF SAT signaland combines it with RF channels.
TDM 7000TDM 6000
COFDM-PAL TransmodulatorREF.:
25560 27460
TDM 7000 STTDM 6000 ST
REF.:27575 27475
IFL 7000
1st IF SAT Twin ConverterREF.:07900
IFL 6000
REF.:06900
IFA 7000 N
1st IF SAT Amplifier REF.:35917
IFA 6000 N
REF.:35916
Transmodulator that converts the QPSK modulatedsignal coming from the satellite into AM channels withanalogue modulation for its distribution together withthe rest of terrestrial and analogue satellite channelsthrough just one cable. Operates in any TV channel inVSB, allowing adjacent channels operation. The stereomodel includes two audio carriers for STERO/DUALsignals processing. No need of individual receivers witheach TV set.
SDM 7000+SDM 6000+
QPSK / AM TransmodulatorREF.:
27880 27580
SDM 7000+ STSDM 6000+ ST
REF.:27895 27595
Power Supply
SPS 7100+SPS 6100+
REF.:67003 66003
Broadband Amplifiers for SMATV and CATV hea-dends. The SHA model is a single input amplifier.The SAC Amplifier is a 4 input model to combineand amplify up to 4 frames (32 channels).
SHA 7115 NSHA 6115 N
Headend AmplifierREF.:
35017 35016
SAC 7415 NSAC 6415 N
REF.:35019 35018
6000 /7000
VSB modulationREF.:
19750 19650REF.:
19765 19665
26
SISTEMA MULTI - TRATAMIENTO
HEADENDS
Series
27
MULTI - PROCESSING SYSTEM
HEADENDS
CC 01 CP 01
APPLICATION MODEL REF.
9 mod. + power supply BST 608 83600
APPLICATION MODEL REF.
CC 01 8370119” Rack frame
CP 01 83702
TYPE OF CONNECTOR MODEL REF.
MINI DIN 5 /CMD EU-ST 84032
Euroconnector
FRAME
APPLICATION MODEL REF.
9 mod. + power supply CFR N56 V 83605
HOUSING
APPLICATION MODEL REF.
Housing Ref. 83605 VNT 56 83004
VENTILATION KIT
APPLICATION MODEL REF.
9 mod. + power supply BST 708 83704
19” RACK FRAME
TYPE OF CONNECTOR MODEL REF.
MINI DIN 8 UCF 100 85100
CONTROL UNIT
APPLICATION MODEL REF.
Frame Ref. 83704 VNT 19 83705
VENTILATION UNIT-SCM 7000
TYPE OF CONNECTOR MODEL REF.
F (m) CX 75 F 84011
75 Ω F LOAD
COVERS
TYPE OF CONNECTOR MODEL REF.
F (m) - F (m) PMD FF 84031
75 Ω F-F COAXIAL BRIDGE
TYPE OF CONNECTOR MODEL REF.
MINI DIN 5 MDIN 5 84004
MINI DIN CONNECTOR
TYPE OF CONNECTOR MODEL REF.
MINI DIN 5 / 3 RCA CDM 3 RCA 84033
MINI DIN - 3RCA CABLE
MINI DIN CABLE - EUROCONNECTOR
6000 /7000 Series
28
NEXUM SERIESDIGITAL CHANNEL AMPLIFIER
HEADENDS
AGC Channel amplifier suitable for channel amplification of the DTTmultiplex in MATV systems. The Nexum DVB-T / H series allowsoperation in adjacent channel, both in VHF and UHF.
APPLICATIONMedium- to large-sized community digital and analogue TV installations locatedin poor reception areas with big level differences between channels.
FEATURES Exceptional selectivity and high output level. Constant Output Level within the Input Operative Range, maintaining the
quality of the signal. High shielding degree, metal chassi (zamak) with “F” connectors. Modular design that allows channel configuration according to installation needs. Easy to set-up due to its system of splitting at input and combining at output.
MODEL
Reference
Channels
Max. output level (DIN K) dBµV
Max. COFDM output level dBµV
Gain dB
Manual output regulation dB
Operative input range dBµV
Min. input level dBµV
Bandwitdth MHz
Selectivity dB
Return losses dB
Noise figure dB
Supply voltage Vdc
Current drawn mA
Operating temperature range º C
Packing dimensions mm
Weight Kg
NEX 645 NEX 645
34121...69 39821…69
21...69
125
118IMD3 -35 dB
53
20
65…95
45
8
30 fc N ± 8 MHz60 fc N ± 16 MHz70 fc N ± 24 MHz
9
11
24 12
125 200
0 ÷ 50
195 x 70 x 32
0,45
Gain50 dB
40 dB
30 dB
20 dB
10 dB
0 dB
-10 dB
Selectivity0 dB
-10 dB
-20 dB
-30 dB
-40 dB
-50 dB
-60 dB
fc24 MHz 24 MHz
16 MHz 16 MHz8 MHz 8 MHz
ch N
OUT leveldBµV
118
113
108
103
20 dB
MAX. GAIN
DIGITAL CLIFF
118 dBµV
MIN. GAIN98 dBµV
VERY SIMPLE SET UP NO SERVICEINTERRUPTIONS
QUICKINSTALLATION
AUTOMATIC ADAPTATION TOWEAK OR STRONG SIGNALS
50 55 60 65 70 75 80 85 90 95 100 105IN level dBµV
NEXUM DVB-T/H Series
12 V
* MER OUT: 30 dB; MER IN 38 dB, OUT Level 75 ÷ 118 dBµV.
29
NEXUM SERIESMULTICHANNEL AMPLIFIERS
HEADENDS
NEX Series
MODEL
Reference
Channels
Max. output level dBµV
Gain dB
Gain adjustment dB
Bandwidth MHz
SelectivityPVN–PAN-1PAN–PVN+1 dBPV+20 MHz
Return losses dB
Noise figure dB
Input-Output impedance Ω
Input-Output connectors
Packing dimensions mm
Weight Kg
NEX 545 NEX 545 NEX 545 NEX 545NEX 401 NEX 402 NEX DAB 2 channels 3 channels 4 channels 5 channels
39102...04 39200 39201 39501...20 39580...600 39570 39571
E02...E04 FM 87 ÷ 108 DAB 195 ÷ 223 — * — * 66 ÷ 69 65 ÷ 69
123115 115 112 (2 Ch AM-TV) 111 (3 Ch AM-TV) 109 (4 Ch AM-TV) 108 (5 Ch AM-TV)
(DIN B –35 dB) (DIN B –35 dB) 109 (2 Ch COFDM) 107 (3 Ch COFDM) 106 (4 Ch COFDM) 105 (5 Ch COFDM)
40 40 40 50
30
7 21 28 16 24 32 40
@ –15 MHz @ –15 MHz N = ch 65 N = ch 6420 35 23 35 23 — — 16 1620 @ +15 MHz @ +15 MHz 30 30 — —>70 30 8 30 8 30 30 — —
9
11 4 5 11
75
F (f)
195 x 70 x 32
0,45
Multichannel amplifier, suitable for amplifying and filtering of TVsignals in MATV headend systems. These amplifiers are perfect forworking in adjacent channels.
APPLICATIONMedium- to large-sized community digital and analogue TV installations locatedin poor reception areas with big level differences between channels.
FEATURES Metal chassis (zamak), integrating the input/output connectors to give the
unit great strength. High shielding degree. High reliability and screening factor due to “F” connectors. Modular design that allows channel configuration according to installation
needs. The use of filters with high "Q" factor (quality factor) inductive lines guarante-
es a high channel selectivity. Easy to set-up due to its system of splitting at input and combining at output.
* Different configurations upon request.
Supply voltage 24 Vdc
Current drawn (24 Vdc) 110 mA
Operating temperature range 0 ÷ 50º C
30
NEXUM SERIES1st IF SAT AMPLIFIER
HEADENDS
IFA 400
Equalized amplifier for the 950 to 2300 MHz band. Amplifies the 1st IFSAT signal and mixes it with terrestrial channels.
APPLICATIONCommunity digital and analogue satellite TV installations where the 1st IF SATsignal has to be distributed.
FEATURES Metal chassis (zamak), integrating the input/output connectors to give the
unit great strength. High shielding degree. High reliability and screening factor due to its “F” connectors. Easy to set-up due to its system of splitting at input and combining at output.
Supply voltage 24 (130 mA) Vdc
Current drawn 65 mA
Operating temperature range 0 ÷ 50º C
MODEL IFA 400
Reference 39204
Frequencies covered MHz 950 ÷ 2150
Number of inputs 1st IF 1 (950 ÷ 2150 MHz)
Number of inputs RF 1 (5 ÷ 862 MHz)
Gain (1st IF) dB 40 (950 MHz) 48 (2150 MHz)
Noise figure dB 7
RF signal rejection (1st IF input) dB 40 (5÷862 MHz)
Through losses RF dB 1,5 (5 ÷ 862 MHz)
Gain adjustment dB 20 (950 ÷ 2150 MHz)
Output level @2150 MHz dBµV 125 (DIN 45004B, DIM –35 dBc)113 (30 transponders,, DIM –35 dBc)
Return losses dB 9
Voltage to LNB 13 VDC / 300 mA
Packing dimensions mm 195 x 70 x 32
Weight Kg 0,35
31
NEXUM SERIESPOWER SUPPLY
HEADENDS
Power supply module for providing operating voltage to the Nexumseries modular system.
APPLICATIONMedium- to large-sized community digital and analogue TV installations locatedin poor reception areas with big level differences between channels.
FEATURES Designed using switching techniques, achieves high performance and mini-
mum losses. Zamak chassis with metal covers. High degree of shielding. Protected against overloading. Complies with the UNE EN 50083-1; UNE EN 50083-2 standard.
MODEL SPS 523 SPS 610 SPS 620
Reference 69523 69524 69610 69620
Input voltage Vac 198 ÷ 264
Output voltage Vac 24 ± 5% 12 ± 5%
Consumption (55 W output) VA 70 24
Max. current output A 2,3
Operating temperature range ºC 0 - 50
Packing dimensions mm 205 x 70 x 80 260 x 75 x 35
Weight Kg 0,75
SPS Series
32
NEXUM SYSTEM
HEADENDS
ACCESSORIES
APPLICATION MODEL REF.
6 mod. + power supply BST N06 83112
12 mod. + power supply BST N12 83109
18 mod. + power supply BST N18 83110
10 mod. + power supplyfor 19” Rack mounting BSK N10 83111
TYPE OF CONNECTOR MODEL REF.
F(m)-F(m) PMD FFN 84034
FRAME
75 Ω F-F COAXIAL BRIDGE
Designed for mounting modules of the NexumSeries Modular System. The kit supplied includesall necessary accessories for wall mounting.Raster 40 mm.Dimensions:Ref. 83109: 531 x 139 x 15 mm.Ref. 83110: 747 x 139 x 15 mm.Ref. 83111: 480 x 177 x 70 mm.Ref. 83112: 325 x 140 x 15 mm.
Rigid 75 Ω coaxial bridge for splitting or combiningRF signals.Raster: 40 mm.
TYPE OF CONNECTOR MODEL REF.
F(f)-F(m) ABF 012 85053
BAND AMPLIFIER
Frequency band: 470 to 862 MHzGain: 12 dBMax. output level: 105 dBµVNoise figure: 3,5 dBBand flatness: 2 dBPower supply: 24V ± 5%Consumption: < 50 mA
APPLICATION MODEL REF.
6 mod. Nexum+power supply CFR N106 83608
12 mod. Nexum+power supply CFR N112 83609
18 mod. Nexum+power supply CFR N118 83607Housing for 2 SCM 6000 frames CFR 602 83610
Housing for 2x18 (2x12) Nexumor 1x18 (1x12) Nexum + 1x8 CFR N218 83604SCM 6000 ventilation unit 83004
HOUSING
Designed for installation and protection of Nexumsystem. Includes all necessary accessories for wallmounting. With safety lock.Allows KIT VNT 56 (Ref.83004) to be mounted.Dimensions:Ref. 83608: 365 x 165 x 250 mm. (2 Kg)Ref. 83609: 570 x 165 x 250 mm. (4 Kg)Ref. 83607: 725 x 165 x 250 mm. (6 Kg)Ref: 83610: 560 x 488 x 235 mm. (6 Kg)Ref. 83604: 790 x 209 x 595 mm. (8 Kg)
BST N12 y BST N18
BSK N10
CFR N218 / CFR N118
TYPE OF CONNECTOR MODEL REF.
F(f)-F(m) ICF 001 85051
SUPPLY INJECTOR
Frequency band: 5 to 2150 MHzReturn losses: -10 dBThrough losses: 0,5 dBDC pass: 1A
33
NEXUM SYSTEM
HEADENDS
APPLICATION EXAMPLES
SAT 1
IFA IFA NEX NEX NEX NEX NEX NEX NEX NEX NEX
SPS
SAT 2 UHF 1 UHF 2 UHF 3 DAB FM
DXR 2D(Ref. 86242)
Nr. DESCRIPTION Nexum Series
1 Channel amplifier - NEX 645 DVB-T/H Ref. 34121...69
2 1st IF SAT amplifier - IFA Ref. 39204
3 Amplifier FM radio - NEX 402 Ref. 39200
4 Amplifier DAB radio - NEX DAB Ref. 39201
5 Power supply - SPS Ref. 69023
6 75Ω F-F coaxial bridge F - PMD FFN Ref. 84034
7 Load - CX 75F Ref. 84011
8 Splitter- Combiner - DRX 2D Ref. 86242
2
5
1
3
6 74
• 47 ÷ 2150 MHz• 2 polarities of 1st IF SAT • 8 terrestrial channels, analogue or digital
• FM radio• DAB radio
SAT 1 RF SAT 2
SAT 1+ RF SAT 2 + RF
8
34
PROGRAMMABLESELECTIVE AMPLIFIER
HEADENDS
Universal Amplification System for headends with 10 UHF filters, thatallows up to 7 configurations with 1, 2 or 3 UHF antennas.
APPLICATIONDesigned for large and medium-sized MATV headends.
FEATURES AES function: patented system which automatically regulates the input
signals, guaranteeing a balanced output level. AGC function in real time for each input channel. Automatic recognition of channel type: digital or analogue. Easily programmable with the UCF 200 or UCF 300 control unit, using a simple
and intuitive menu. With memory to clone up to 8 different configurations. It incorporates amplification of 1st IF SAT. (EVO 200 & 300). Auxiliary input for channels processed by other equipment. Exceptional screening factor. Remote pre-amplifiers powering at U1,U2 and U3. TEST output (-30 dB). Models with D: LTE optimised.
Consumption 38 W
Supply to LNB 0V/13V/17V/0Hz/22KHz, 300mA
Mains supply 195 ÷ 265
Working temperature 0-50 ºC
Band FM BI BIII/DAB AUX UHF1 UHF2 UHF3 (1) 1st IF SAT
Bandwidth MHz 87,5÷108 47÷68 174÷230 47÷68 470÷790 470÷790 470÷790 950÷2150130÷862Number of amplifiers 1 1 1 1 10 1Filter width — Programmable: 1 ÷ 6 channels —
0 10 00 9 10 8 2
Configuration of number of No 3 5 2 Noamplifiers per input 3 6 1
3 7 02 7 1
Gain (2) dB 40 40 40 23 53 53 43 37÷45 (3)Input Regulation dB 25 25 25 No 30 —OUT Regulation dB — 20 20AGC (only AGC models) No Programmable NoSelectivity ± 20 MHz dB — 25 —Noise figure dB 6 6 8 15 6 15
Operational input levelanalogue
dBµV71/101 70/95 70/93 90 60-105 70-100
68/88digital — 55/80 55/78 75 50-95 60-90
Decoupling between inputs dB — 20 —Remote power (100 mA total) — 0-24 —
INPUTS
(1).- 1ST IF SAT input (only MicroMATV Evo 200 C and MicroMATV Evo 300 C).(2).- –4 dB lower (MicroMATV Evo 300 C model).
(3).- Fixed 8 dB slope between begin and end of band.(4).- –60 dBc for TV PAL y –35 dBc for FM, and 1ST IF SAT.
MODEL MMTV® Evo MMTV® Evo MMTV® Evo MMTV® Evo MicroMATV® Evo MicroMATV® EvoD 100 C D 100 D 200 C D 200 D 300 C D 300
Reference 35541 35531 35542 35532 35543 35533
Number of outputs 1 1 2
Band RF RF+1st IF SAT RF RF+1st IF SAT
Bandwidth MHz 47÷68 47÷68 950÷2150 47÷68 47÷68 950÷2150130÷862 130÷862 130÷790 130÷790
Output level IM3 DIN45004B (4) dBµV 123 124 121 120 120 121
Packing dimensions mm 390 x 275 x 60
Weight Kg 4,5
OUTPUTS
MicroMATV Evo Series
REF MODEL35571 MicroMATV Evo 100 (up to 862)35581 MicroMATV Evo 100 C (up to 862)
35
PROGRAMMABLE SELECTIVE AMPLIFIER
HEADENDS
SURF PRO 6
Robust and compact amplifier for distribution of terrestrial televisionsignals in medium sized installations. Programming via UCF 300remote control.
APPLICATIONDistribution of the RF signal for medium-sized installations.
FEATURES 2 programmable UHF inputs with 6 channel filters with variable width from 1
to 6 channels. 1 BI / BIII / VHF input 1 FM input. 1 auxiliary input Automatic adjustment system (AES) to ensure proper adjustment of output
levels. Metal housing for maximum protection and high shielding. Easy programming via the UCF 300 remote control. Possibility to add 3 additional filters via the Book Extend. Ref. 35562 adapted to the second digital dividend up to CH48.
MODEL SURF PRO 6 / D2
Reference 35561 / 35562
Band BI/BIII UHF FM Auxiliary
Number of outputs 1 2 1 1
Number of filters Broadband 6 Broadband 16 — 0
Input and filter configuration — 4 — 2 — —3 — 3
Bandwidth MHz 47 ÷ 68 470 ÷ 790 (35561) 87,5 ÷ 108 47 ÷ 68174 ÷ 230 470 ÷ 694 (35562) 132 ÷ 862
Programmable filter width — 1÷ 6 channels — —
Gain dB 35 45 30 18
Independent regulation per filter dB ≥25 ≥30 ≥25 —
Selectivity N (±16 MHz) dB — 20 — —
Noise figure dB 6 6 6 —
Operational input level dBµV 55 50 ÷ 93 71 ÷ 101 75 ÷ 90
Output level DIN 45004B dBµV 117 107 @ –35 dBc 117
Output level 10 channels dBµV 107
Programmable output level dB 95 ÷ 107
Isolation between inputs dB UHF > 20 dB —VHF/UHF/FM > 50
DC pass — 12-24V / 50mA (Programmable) — —
Packing dimensions mm 280 x 220 x 63
Weight Kg 1,5
Power supply 185 ÷ 265 Va
Consumption 13 W (<120 mA)
Operating temperature range - 0 ÷ 50º C
36
FAGOR CONTROL UNITHEADENDS
UCF 300
Control unit valid for programming a MicroMATV EVO or a Surf Proby means of a simple and intuitive menu. With memory for cloningup to 8 different configurations.
MODEL UCF 300
Reference 85115
Display Alphanumerical, (2 x 16 characters)
Packing dimensions mm 165 x 65 x 50
Weight Kg 0,2
UHF
UCF 300
UHF UHF DAB FM SAT1
CX 75 F
@ktive
IFA 3000 book
MicroMATV EVO 300 + IFA 3000 book
SAT2
MicroMATV EVO 100
AUX
AML 210
IC N001F
UHF UHF UHF BIII FM
@ktive
UCF 300
RF
37
MICROMATV® SERIES
HEADENDS
TYPE OF CONNECTOR MODEL REF.
F(f)-F (m) FAT 010 85041
TYPE OF CONNECTOR MODEL REF.
F(f)-F(m) ICF 001 85051
SUPPLY INJECTOR
FIXED ATTENUATOR
Frequency band: 5 ÷ 2150 MHzReturn losses: –10 dBThrough losses: 0,5 dBDC pass: 1 A
Covered band: 5 ÷ 2400 MHzReturn losses: –10 dBDC Block
ACCESSORIES
TYPE OF CONNECTOR MODEL REF.
F(f)-F(m) ATF 020 85050
ADJUSTABLE ATTENUATOR
Frequency band: 5 ÷ 2150 MHzReturn losses: –10 dBThrough losses: 0,5 to 20 dBDC pass (0-22 KHz): 1 A
TYPE OF CONNECTOR MODEL REF.
F(f)-F(m) ABF 012 85053
BAND AMPLIFIER
Frequency band: 470 ÷ 862 MHzGain: 12 dBFlatness: 2 dBNoise figure: 3,5 dBPower supply: 24 V ± 5%Consumption: <50 mAOutput level: 105 dBµV
AUX
OUT
UHF UHF BIII FM
Example SURF PRO 66 filters UHF
38
MULTIBAND AMPLIFIERS
HEADENDS
Amplifiers specially designed for distribution of TV signals up to 862MHz.
APPLICATIONDesigned to work under adverse weather conditions, where a robust amplifier isneeded.
FEATURES LTE ready, incorporates a 790/862 commutator. Their circuit is integrated in a Zamak box, which ensures correct operation of
the amplifier (IP63). The amplifier has been optimised by specific circuits which protect it against
telecommunications services on adjacent frequency bands. Integrates a switch mode power supply to reduce the inside temperature and
help extend the life of the equipment.
Supply voltage 230 Vac ± 15 %
Operating temperature range 0 ÷ 50º C
SABAL Series
MODEL HA 503 HA 504 HA 505
Reference 35943 35942 35941
Inputs BI/FM BIII UHF BI/FM BIII UHF UHF BI/FM BIII BIV BV UHF
Covered frequencies MHz 47-108 174-230 470-862 47-108 174-300 470-862 470-862 47-108 174-300 470-582 590-862 470-862470-790** 470-790** 470-790** 590-790** 470-790**
Output level* dBµV 117 125 117 125 117 125
Gain dB 38 50 38 50 38 50
Gain regulation dB 20
Test output dB –30
Noise factor dB 5,5 4,5 6,5 5,5 4,5 6,5 5,5 4,5 6,5
DC pass (12 Vdc) mA 100 100 100
Weather protection IP63
Powe Vac 195÷265
Power comsuption (max) W 16 18 20
Packing dimensions mm 280 x 175 x 60
Weight Kg 3,1
* UHF: DIN 45004 B (‐60 dB)** 790/862 MHz selectable by a switch
39
MULTIBAND AMPLIFIERS
HEADENDS
Medium-power amplifiers designed for distribution of terrestrialand satellite TV signals.
APPLICATIONSuitable for headend amplification of the signal coming from multiple antennas incommunity installations.
FEATURES Supply to pre-amplifiers at UHF inputs: 0/12/24 Vdc, switch selectable. Regulation by attenuators for higher linearity (on models with 20dB of regulation). Interstage attenuation on all models to ensure optimum noise figure in any
situation. Adapted to the digital dividend, UHF higher frequency switchable between 790
and 862 MHz. (FMA 338-35955 not LTE switchable). SAT input models: Model 538S FMA signal generator available for LNB control:
0/13/18V, 0/22KHz and others allow the passage of the signal from anindividual receiver.
Switching power supply , which reduces consumption and internal temperature,and guarantees a long life of equipment.
Robust metal box. Test output: –30 dB of output level.
SUMMA
Input power supply 230 Vac ± 15%Operating temperature 0 ÷ 50 ºCPacking dimensions 257 x 147 x 89 mmWeight 0,95 Kg
* Terrestrial: DIN 45004 B (-60 dB) SAT: DIN 45004 B (-35 dB).** UHF frequency between 790 and 862 MHz switchable. (FMA 338-35955 not LTE switchable).
MODEL
ReferenceNbr. of inputsBand
Band coverage MHz
Gain dBRegulation dBNoise figure dBOutput level * dBµVPower supply DC 0/12/24V mA
FMA 238 FMA 430
35954 359502 4
FM;DAB UHF BI÷FM BIII;DAB UHF SAT
88÷108 470÷790/ 47÷108 174÷230 470÷790/ 950÷2300174÷230 470÷862** 470÷862**
24 38 15 20 30 -220 15 —6 7 6 —
110 116 106 112 —— 80 — — 50 —
MODEL
ReferenceNbr. of inputsBand
Band coverage MHz
Gain dB
Regulation dBNoise figure dBOutput level * dBµVPower supply DC 0/12/24V mA
FMA 430 S FMA 438
35951 359534 4
BI-FM BIII;DAB UHF SAT BI÷FM BIII;DAB UHF UHF47÷108 174÷230 470÷790/ 950÷2300 47÷108 174÷230 470÷790/ 470÷790/
470÷862** 470÷862** 470÷862**
15 20 30 20(950 MHz) 28 30 3825(2150 MHz)15 20
7 6 10 7 9106 112 115 110 116
— — 50 — — — 90
Series
MODEL
ReferenceNbr. of inputsBand
Band coverage MHz
Gain dB
Regulation dBNoise figure dBOutput level * dBµVPower supply DC 0/12/24V mA
FMA 538 FMA 538 S
35956 359525 5
BI-FM BIII;DAB UHF1(21-34) UHF2(36-69) UHF BI÷FM BIII;DAB UHF UHF SAT
47÷108 174÷230 470÷582 582÷790/ 470÷790/ 47÷108 174÷230 470÷790/ 470÷790/ 950÷2300582÷862** 470÷862** 470÷862** 470÷862**
28 30 38 28 30 38 31(950 MHz)38(2150 MHz)
20 207 9 7 9 10106 116 110 116 120
— — 90 — — 90 —
40
MULTIBAND AMPLIFIERSLTE READY
HEADENDS
Amplifiers designed for the distribution of TV signals up to 862 MHzor 790 MHz.
APPLICATIONSuitable for headend amplification of the signal coming from multiple antennas inindividual or community installations, medium or small sized.
FEATURES Modern design and small size, making it easier to install. Amplification and independent regulation per input. High performance switching power supply, which provides a high output
current with less consumption, and guarantees a long life product. Various models with DC pass. LED power indicator.
FMB LTE
MODEL
Reference
Nbr. of inputs
Band
Gain dB
Regulation dB
Output level DIN 45004B-60 dBµV
Noise figure dB
Output test dB
Current drawn mA
DC pass mA
Dimensions mm
Weight Kg
FMB 132 UK FMB 410 FMB 430 FMB 440
35367 35372 35373 35374
1 1 3 4
BI-BII UHF UHF FM BIII-DAB UHF FM BIII-DAB UHF1 UHF2
28 38 38 28 28 38 28 28 38 38
25 15 15 20 20 15 20 20 15 15
114
5 3 3 7 8 3 7 8 6 6
– 30 – 30 – 30 —
80
— — 45 — — 45 — — 45 45
50 x 130 x 50
0,34
Series
Power supply 230 Vac -15% +10%
Working temperature 0 ÷ 50º CPacking dimensions 150 x 130 x 50 mmWeight 0,34 Kg
220 VAC
DES 4xx+
PAU 204+DES 4xx+
UHF1 UHF2 BIII
TEST(-30 dB)
Application Example FMB 440
Field Meter
41
HEADENDS
1ST IF SAT AMPLIFIER
IFA 3000 Book
1st IF SAT amplifier with programmable supply voltage for a UniversalLNB and diplexed combining of the VHF and UHF channels.
APPLICATIONCommunity satellite TV installations with IF processors.
FEATURES A high performance RF / 1st IF SAT diplexer guarantees a noise free terrestrial
TV reception. It provides optional supply voltage for the LNB, any possibility (0, 13, 17 V //
0, 22 KHz). The 1st IF SAT amplification with positive slope (more gain in high frequencies:
8 dB) to compensate the cable attenuation, allows distribution of the 1st IF SATsignal to more users.
MODEL IFA 3000 BOOK
Reference 35911
Input/Output connectors F (f)
Number of inputs 1 input 1st IF SAT + 1 input RF
LNB DC pass 0, 13, 17 V // 0, 22 KHz (250 mA)
1st IF SAT Frequency range MHz 950 ÷ 2300
1st IF SAT input rejection dB 40 @ 5 ÷ 862 MHz
RF Frequency range MHz 5 ÷ 862
RF Through losses dB 1,5
Output band covered MHz 5 ÷ 2300
IF Input level dBµV 68 - 88
35 @ 950 MHz1st IF SAT Gain dB 47 @ 2150 MHz
Gain regulation dB 20
Noise figure dB 8
Output level 2150 MHz dBµV 120 (DIN 45004B, -35 dBc) / 110 (15 transponders)
Packing dimensions mm 103 x 171 x 23
Weight Kg 0,75
Supply voltage 195-265 Vac
Current drawn 12 W
Operating temperature range 0 ÷ 50º C
UHF
UCF 300
UHF UHF DAB FM SAT1
CX 75 F
@ktive
IFA 3000 book
SAT2
MicroMATV EVO 300 + IFA 3000 book
42
HDMI TO COFDM DIGITAL MODULATOR
HEADENDS
HTT 102
MODEL HTT 102
Reference 86534
VIDEO ENCODING H.264/AVC High Profile Level 4.0 (HD)
Input HDMI x 1 + 1 (backup)
Resolution 1920*1080_50, 1920*1080_60; 1280*720_50, 1280*720_60
AUDIO ENCODING MPEG1 Layer II
Sample rate KHz 48
Bit rate Kbps 64, 96, 128, 192, 256, 320, 384
MODULATION STANDARD EN300744
FFT mode 2K, 8K
Bandwidth MHz 6, 7, 8
Constallation QPSK, 16QAM, 64QAM
Guard interval 1/4, 1/8, 1/16, 1/32
FEC 1/2, 2/3, 3/4, 5/6, 7/8
MER dB ≥ 36
RF frequency 139~862 MHz, 1 KHz step
RF output level 94~114 dBµV, 0.1dB step
Local interface LCD + control buttons
Power supply DC 12V
Dimensions mm 153 x 110 x 50
Weight Kg 0,5
The digital modulator allows converting signals in HDMI format tosignals modulated in COFDM.
APPLICATIONProcesses HDMI signals from Satellite Receivers, Computers, Cameras or DVDand Blu-Ray Players into COFDM signals.
FEATURES Fully compatible bitrates. Allows you to connect several devices in cascade. Logical Channel Number LCN. Excellent modulation quality; MER >36dB. LCD display and local configuration. Metal housing with internal ventilation. Allows software upgradings.
43
HEADENDS
TWIN A/V ENCODER MODULATOR
AVE 200
Twin Digital-Modulator to convert two Audio / Video signals into aDVB-T digital multiplex.
APPLICATIONProcesses two A/V signals from any source like satellite receivers, computers,cameras, DVD or Blu-ray players, modulating into a COFDM multiplex.
FEATURES Fully configurable bitrates. Complete range of A/V input formats: S-Video, YPbPr and CVBS. Powerful multiplex configuration. Logical channel numbers (LCN). Excellent modulation quality MER ≥ 42dB. LCD display & local configuration. Well ventilated, metal housing. Backup/Restore saved configurations. It is possible to install several units in cascade.
MODEL AVE TWIN
Reference 85535ENCODING SECTIONVideo encoding MPEG-2 & MP@ML (4:2:0)Input 2 x (S-Video / YPbPr / CVBS)Resolution 700x576_50i (PAL); 720x480_60i (NTSC)Audio encoding MPEG 1 Layer IIInterface 2 x Stereo / MonoSample rate KHz 48 Bit rate Kbps 64, 96, 128, 192, 256, 320 MODULATOR SECTIONStandard DVB-T, COFDMFFT mode 2K, 8KBandwidth MHz 6, 7, 8Constellation QPSK, 16QAM, 64 QAMGuard interval 1/4, 1/8, 1/6, 1/32FEC 1/2, 2/3, 3/4, 5/6, 7/8MER dB ≥ 42RF frequency 30÷960 MHz, steps of 1KHzRF output level 79÷91 dBµV, steps of 0,1 dBLocal interface LCD + control buttonsPower supply DC 12VDimensions mm 144 x 238 x 52Weight Kg 1
ACCESSORIES:The package includes 2 3RCA-3RCA cablesand power supply.
44
MULTISWITCHES
HEADENDS
SAT-IF cascadable multiswitches. 4, 8, 12 & 16 SAT inputs + 1 Terrestrial input.
APPLICATIONFor the distribution of satellite TV signal up to 16 polarities. Each user receivesboth satellite and terrestrial signal by only one coaxial cable and any satellitepolarisation can be selected from each user’s receiver.
FEATURES Low cascading loss at high subscriber extensions. Cascade distribution of 4, 8 and 16 satellite polarizations. Input for terrestrial signal, compatible with terrestrial digital broadcast (DVB-T). Control by voltage/tone from the user´s receiver. Satellite selection through
DiSEqC 2.0.-2.1. The high selectivity of the input filters guarantees the maximum quality of the
signal. Terminal multiswitches and amplifiers: power supply included. LNB Quattro & LNB Quad compatible.
POWER SUPPLY WITH EUROPEAN PLUG
MODEL SPS 1825
Reference 86430 86480
Output voltage 18 Vcc 2.5A
Input voltage Vac 80-260
PROGRAMMINGThe UCM 100 programming unit allows to modify the output configuration: Give priority to one of the polarities to work with receivers without DiSEqC
commands. Blocking the signal of one, several or all polarities.
MODEL UCM 100
Reference 86599
Connector F (female)
8 POLARITIES/ 48 SUBSCRIBERS
UHF UHFSAT SAT
FMC Series
45
CASCADABLE MULTISWITCHES
HEADENDS
SAT-IF cascade multiswitchs 4 SAT inputs + 1 Terrestrial input.
APPLICATIONFor the distribution of satellite TV signal up to 5 polarities. Each user receives bothsatellite and terrestrial signal by only one coaxial cable.
FEATURES FMC series, cascade models, FMF series final models. Input for terrestrial signal, compatible with terrestrial digital broadcast (DVB-T). Control by voltage/tone from the user’s receiver. Satellite selection through
DiSEqC 2.0.-2.1. FBF models include power supply SPS 1825.
MODEL
Reference
Inputs
Subscriber outputs
Frequency range TERR dBSAT
Tap gain / loss TERR dBSAT
Passage loss TERR dBSATSAT-SAT
Isolation SAT-TERR dBOUT-OUT
Max. Output level SAT dBµV(Ter -60 db IM3 SAT -35 dB IM3)
Satellite and polarity selection
Max. current consumption (without LNB) mA
Power supply Vac
Operating temperature range ºC
Weight Kg
FMC 508 FMC 512 FMC 516 FMC 524 FMC 532 FMF 508 FMF 512 FMF 516 FMF 524 FMF 532
86432 86433 86434 86445 86446 86460 86461 86462 86463 86464
4 SAT + 1 TERR
8 12 16 24 32 8 12 16 24 32
70÷862950÷2150
‐2 ± 2 ‐2 ± 2 ‐3 ± 2 ‐7 ± 2 ‐8 ± 2 2 ± 2 2 ± 2 ‐0 ± 2 ‐2 ± 2 ‐3 ± 2–2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2)‐4 ‐4 ‐4,5 ‐5 ‐6‐1,5 ‐2 ‐2,5 ‐3 ‐4 —
>40 >35 >35
102
13 Vdc / 18 Vdc ‐ 0 / 22 KHzDISEqC 2.0‐2.1
180 300 180 300
— 195‐265 Vac / 18Vdc / 2.5 A
‐10 to 40
0,55 0,6 0,75 1,15 1,3 0,6 0,65 0,8 1,2 1,35
DIMENSIONS REF86432,86433,
220 x 245 x 50 86434,
Packing dimensions mm 864608646186462,
233 x 315 x 50 86445, 86463233 x 350 x 50 86446, 86464
FMC5 INPUTS SYSTEM
Series
REF MODEL DESCRIPTION86484 FMF 508 BS Final multiswitch 5x886485 FMF 512 BS Final multiswitch 5x1286486 FMF 516 BS Final multiswitch 5x1686487 FMF 524 BS Final multiswitch 5x2486488 FMF 532 BS Final multiswitch 5x32
BS PLUG REFERENCES
46
CASCADABLE MULTISWITCHES
HEADENDS
SAT-IF cascade multiswitchs 8 SAT inputs + 1 Terrestrial input.
APPLICATIONFor the distribution of satellite TV signal up to 9 polarities. Each user receives bothsatellite and terrestrial signals by only one coaxial cable.
FEATURES FMC series, cascade models, FMF series final models. Input for terrestrial signal, compatible with terrestrial digital broadcast (DVB-T). Control by voltage/tone from the user’s receiver. Satellite selection through
DiSEqC 2.0.-2.1. FBF models include power supply SPS 1825.
MODEL
Reference
Inputs
Subscriber outputs
RETURN PATH Frequency range TERR dB
SAT
RETURN PATHTap gain / loss TERR dB
SAT
Passage loss TERR dBSATSAT-SAT
Isolation SAT-TERR dBOUT-OUT
Max. Output level SAT dBµV(Ter -60 db IM3 SAT -35 dB IM3)
Satellite and polarity selection
Max. current consumption (without LNB) mA
Power supply Vac
Operating temperature range ºC
Weight Kg
FMC 908 FMC 912 FMC 916 FMF 908 FMF 912 FMF 916
86436 86437 86438 86465 86466 86467
8 SAT + 1 TERR
8 12 16 8 12 165÷6570÷790950÷2150‐23
‐22 ± 2+2 ± 2
‐3 ‐3 ‐4‐1,5 ‐2 ‐3 —
>37 >38 >38 >37 >38 >38>35 >35 >35 >35 >35 >35>35 >35 >35 >35 >35 >35
102
13 Vdc / 18 Vdc ‐ 0 / 22 KHzDISEqC 2.0‐2.1
50
195‐265 Vac / 18Vdc‐0/22 KHz
‐10 to 40
0,52 0,65 0,77 0,52 0,65 0,77
DIMENSIONS REF86436, 86437,
235 x 315 x 50 86438, 86465, Packing dimensions mm 86466, 86467
235 x 630 x 50 86447, 86448, 86468, 86469
FMC9 INPUTS SYSTEM
Series
REF MODEL DESCRIPTION86489 FMF 908 BS Final multiswitch 9x886490 FMF 912 BS Final multiswitch 9x1286491 FMF 916 BS Final multiswitch 9x1686492 FMF 924 BS Final multiswitch 9x2486493 FMF 932 BS Final multiswitch 9x32
BS PLUG REFERENCES
47
CASCADABLE MULTISWITCHES
HEADENDS
SAT-IF cascade multiswitchs 12 SAT inputs + 1 Terrestrial input.
APPLICATIONFor the distribution of satellite TV signal up to 12 polarities. Each user receivesboth satellite and terrestrial signals by only one coaxial cable.
FEATURES FMC series, cascade models, FMF series final models. Input for terrestrial signal, compatible with terrestrial digital broadcast (DVB-T). Control by voltage/tone from the user´s receiver. Satellite selection through
DiSEqC 2.0.-2.1. FBF models include power supply SPS 1825.
MODEL
Reference
Inputs
Subscriber outputs
Frequency range TERR dBSAT
Tap gain / loss TERR dBSAT
Passage loss TERR dBSATSAT-SAT
Isolation SAT-TERR dBOUT-OUT
Max. Output level SAT dBµV(Ter -60 db IM3 SAT -35 dB IM3)
Satellite and polarity selection
Max. current consumption (without LNB) mA
Power supply Vac
Operating temperature range ºC
Weight Kg
FMC 1308 FMC 1312 FMC 1316 FMC 1324 FMC 1332 FMF 1308 FMF 1312 FMF 1316 FMF 1324 FMF 1332
86620 86621 86622 86623 86624 86625 86626 86627 86628 86629
12 SAT + 1 TERR
8 12 16 24 32 8 12 16 24 32
70÷790950÷2150
–2 ± 2 –2 ± 2 –3 ± 2 –7 ± 2 –8 ± 2 2 ± 2 2 ± 2 –0 ± 2 –2 ± 2 –3 ± 2–2÷2 (± 2) –2÷2 (± 2) –2÷2 (± 2) –2÷2 (± 2) –2÷2 (± 2) –2÷2 (± 2) –2÷2 (± 2) –2÷2 (± 2) –2÷2 (± 2) –2÷2 (± 2)
–4 –4 –4,5 –5 –6–1,5 –2 –2,5 –3 –4 —
>40 >35 >35
102
13 Vdc / 18 Vdc - 0 / 22 KHzDISEqC 2.0-2.1
180 300 180 300
— 195-265 Vac / 18Vdc / 2.5 A
‐10 to 40
0,8 1 1,1 1,5 1,7 1,1 1,3 1,4 1,8 2
DIMENSIONS REF86620,
233 x 315 x 50 86621,86622,
Packing dimensions mm 86625, 86626233 x 350 x 50 86627
300 x 350 x 50 86623,86624, 86628
300 x 433 x 50 86629
FMC13 INPUTS SYSTEM
Series
REF MODEL DESCRIPTION86631 FMF 1308 BS Final multiswitch 13x886632 FMF 1312 BS Final multiswitch 13x1286633 FMF 1316 BS Final multiswitch 13x1686634 FMF 1324 BS Final multiswitch 13x2486498 FMF 1332 BS Final multiswitch 13x32
BS PLUG REFERENCES
48
CASCADABLE MULTISWITCHES
HEADENDS
SAT-IF cascade multiswitchs 16 SAT inputs + 1 Terrestrial input.
APPLICATIONFor the distribution of satellite TV signal up to 16 polarities. Each user receivesboth satellite and terrestrial signals by only one coaxial cable.
FEATURES FMC series, cascade models, FMF series final models. Input for terrestrial signal, compatible with terrestrial digital broadcast (DVB-T). Control by voltage/tone from the user´s receiver. Satellite selection through
DiSEqC 2.0.-2.1. FBF models include power supply SPS 1825.
MODEL
Reference
Inputs
Subscriber outputs
Frequency range TERR dBSAT
Tap gain / loss TERR dBSAT
Cascade gain TERR dBSATSAT-SAT
Isolation SAT-TERR dBOUT-OUT
Max. Output level SAT dBµV(Ter -60 db IM3 SAT -35 dB IM3)
Satellite and polarity selection
Max. current consumption (without LNB) mA
Power supply Vac
Operating temperature range ºC
Weight Kg
FMC 1708 FMC 1712 FMC 1716 FMC 1724 FMC 1732 FMF 1708 FMF 1712 FMF 1716 FMF 1724 FMF 1732
86439 86440 86441 86449 86450 86470 86471 86472 86473 86474
16 SAT + 1 TERR
8 12 16 24 32 8 12 16 24 32
70÷790950÷2150
‐2 ± 2 ‐2 ± 2 ‐3 ± 2 ‐7 ± 2 ‐8 ± 2 2 ± 2 2 ± 2 ‐0 ± 2 ‐2 ± 2 ‐3 ± 2–2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2) –2÷2 (±2)‐4 ‐4 ‐4,5 ‐5 ‐5‐1,5 ‐2 ‐2,5 ‐3 ‐4 —
>40 >35 >35
102
13 Vdc / 18 Vdc ‐ 0 / 22 KHzDISEqC 2.0‐2.1
180 300 180 300
— 195‐265 Vac / 18Vdc / 2.5 A
‐10 to 40
0,92 1,2 1,27 1,67 1,9 1,35 1,62 1,7 2,1 2,3
REFERENCE MODEL UN
86440 FMC 1712 1
08275 STT TWIN 7
35083 SHA 1
85016 LPU 1
DIMENSION S REF86439,86440,
233 x 350 x 50 86441,
Packing dimensions mm 8647086471
300 x 350 x 50 86472, 86449300 x 433 x 50 86473410 x 405 x 50 86450, 86474
FMC17 INPUTS SYSTEM
Series
REF MODEL DESCRIPTION86489 FMF 908 BS Final multiswitch 9x886490 FMF 912 BS Final multiswitch 9x1286491 FMF 916 BS Final multiswitch 9x1686492 FMF 924 BS Final multiswitch 9x2486493 FMF 932 BS Final multiswitch 9x32
BS PLUG REFERENCES
49
CASCADABLE MULTISWITCHES
HEADENDS
FMCAMPLIFIER SERIES
FSP/FTPPASSIVES SERIES
MODEL
Reference
Inputs
Band TERR dBSAT
Gain TERR dBSAT
Regulation gain TERR dBSAT
Isolation SAT-SAT dBSAT-TERR
Max. output level SAT dBµV(TERR. ‐60 dB IM3, SAT ‐35dB IM3) TERR
Consommation (without LNB) mA
Power supply
Operating temperature range ºC
Packing dimensions mm
Weight Kg
FAC 005 FAC 009 FAC 013 FAC 017
86442 86443 86630 86444
4 SAT + 1 TERR 8 SAT + 1 TERR 12 SAT + 1 TERR 16 SAT + 1 TERR
70÷790950÷2150
‐1 ± 222 ± 1 (4DB tilt)
2020
>33 >33 >33 >33>50 >50 >50 >50
120110
50
18Vdc 2.5A
‐10 to 40
220 x 250 x 50 235 x 315 x 50 230 x 310 x 50 250 x 500 x50
0,55 1,21 1,35 1,51
MODEL
Reference
Inputs
Outputs
Bands TERR MHzSAT
Derivation TERR dBSAT
Attenuation TERR dBSATSAT-SAT
Isolation SAT-TERR dBOUT-OUT
Operating temperature range ºC
Packing dimensions mm
Weight Kg
FSP 005 FSP 009 FSP 017 FTP 505 FTP 510 FTP 909 FTP 918 FTP 1717 FTP 1734
86451 86454 86457 86452 86453 86455 86456 86458 86459
4 SAT+ 1 TERR 8 SAT + 1 TERR 16 SAT + 1 TERR 4 SAT+ 1 TERR 8 SAT + 1 TERR 16 SAT + 1 TERR
2x5 (4+1) 2x9 (8+1) 2x17 (16+1) 5 (4+1) 2x5 (4+1) 9 (8+1) 2x9 (8+1) 17 (16+1) 2x17 (16+1)
47÷862950÷2150
‐12 ‐12 ‐12 ‐12 ‐12 ‐12‐12 ‐12 ‐12 ‐12 ‐12 ‐12
‐4 ‐4 ‐4 ‐1,5 ‐2 ‐1,5 ‐2 ‐1,5 ‐2‐4 ‐4 ‐4 ‐0,5 ‐1 ‐0,5 ‐1 ‐0,5 ‐1>35 >35 >35 >35 >35 >35 >35 >35 >35>35 >35 >35 >35 >35 >35 >35 >35 >35>20 >20 >20 >30 >30 >30 >30 >30 >30
‐10 to 40
220 x 250 x 50 235 x 315 x 50 150 x 500 x 50 220 x 250 x 50 235 x 315 x 50 150 x 500 x 50
0,25 0,4 0,6 0,25 0,28 0,4 0,4 0,6 0,6
SPLITTERS TAP‐OFFS
Amplifier up to 16 polarities + terrestrial input.
APPLICATIONSuitable as head amplifiers or distribution amplifiers in cascade multiswitchinstallations.
FEATURES 5, 8 and 16 satellite polarities amplifier. High linearity with 4dB slope to compensate distribution losses. Passive terrestrial input. Includes SPS 1825 power supply.
REF MODEL DESCRIPTION86631 FMF 1308 BS Final multiswitch 13x886632 FMF 1312 BS Final multiswitch 13x1286633 FMF 1316 BS Final multiswitch 13x1686634 FMF 1324 BS Final multiswitch 13x2486498 FMF 1332 BS Final multiswitch 13x32
BS PLUG REFERENCES
50
PROGRAMMABLE MULTISWITCH
HEADENDS
FMU 402 Series
Unicable II compatible programmable multiswitch for distributionof terrestrial and satellite signal through a single cable up to 32users.
APPLICATIONDistribution of satellite signals minimizing the installation cost and time.
FEATURES 4 satellite polarity input plus terrestrial input. Unicable output + Legacy output. Pass-through outputs for cascade installation. Programmable output bands configuration. Unicable II (EN50607) and Unicable I (EN50494) compatible. Packing includes power supply and power inserter.
MODEL FMU 402
Reference 86550
Inputs 4 SAT (950-2150 MHz) + 1 TERR (47-862 MHz)
Loop-through losses (max) SAT dB 3TERR 3
4 loop through satellite IF +1 loop through terrestrialOutputs 1 Unicable output up to 32 users
1 legacy output (terr+sat)
Input level range dBµV 59 ÷ 94
Output signal level dBµV 83 dBµV (with CAG)
User band bandwidth MHz Configurable 10-80 (default 36MHz)
Gain dB < 3
Frequency Configurable Unicable II (EN50607) / Unicable I (EN50494)
Isolation SAT-SATSAT-TERR dB > 28SAT channel-channel
Integrated phase noise 1,5º max
Legacy port switching VL: 13V/0KHz; VH: 13V/22KHzHL: 18V/0KHz; HH: 18V/22KHz
LNB power supply 13/18V, max 300mA
DC power consumption 450mA @ 13Vdc (max)
Working Temperature ºC –20 ÷ +60
Packing dimensions mm 120 x 125 x 75
Packing weight Kg 0,5
ExampleQuattro LNB
AC/DCPower Adapter
STB1
STB 32
Legacy(Universal) Power
inserter
AC/DCPower Adapter
STB1
STB 32
Legacy(Universal) Power
inserter
51
LTE PROTECTION FILTER FOR MAST
AMPLIFICAT
ION
LBF E-766 LBF E-782
MODEL LBF –E 766 LBF –E 782 LBF –E 694
Reference 85057 85055 85058
Nº of input / output 1/1 1/1 1/1
Band pass DC – CH 57 DC – CH 59 DC – CH 48
Attenuation in band dB 1 1 1
LTE rejection (791-862 MHz) dB 60 60 60 (703-862 MHz)
GSM-TETRA rejection 60 60 60(870-960 MHz) )
DC pass mA Si / 300
Packing dimensions mm 100 x 87 x 45
Operating Temperature Range ºC –10 ºC – +50
Weight Kg 0,16
Low pass filters for protectionagainst interfering LTE signals.
TV switchable LTE filter.
APPLICATIONLTE protection filter for 4G (791 MHz-862 MHz) and GSM+TETRA (870MHz-960 MHz) signals received by theantenna.
FEATURES Manufactured in metal boxes with DIN connectors, providing high shielding.
MODEL LBF 774 TV
Reference 85060
Pass band MHz DC - 774 MHz
Pass band attenuation dB 1
Pass band rejection (806÷1000MHz) >45dB
LBF-774 TV
MODEL LBF 694 LBF 790 LBF 782 LBF 774 LBF 766 LBF 758
Reference 85056 85044 85045 85046 85047 85048
Band pass MHz 5÷694 5÷790 5÷782 5÷774 5÷766 5÷758
Rejected Band MHz 703÷2200 822÷2200 814÷2200 806÷2200 798÷2200 790÷2200
Rejection dB ≥ 45
Through loss dB ≤ 1,5
Return loss dB ≥ 12
Type of connector F(m)‐F(f)
LBF Series
LBF-E Series
High rejection filter for outdoor.
APPLICATIONLTE protection filter for 4G (791 MHz-862 MHz) and GSM + TETRA (870 MHz-960 MHz) signals received by the antenna.
FEATURES Shielded metal box with F connectors that assures a a high degree of shielding. Metallic box housed in a plastic one, ready to be installed. Allows DC pass between any output. High rejection against interfering signals. Suitable for the upcoming LTE/4G signals.
LTE PROTECTED MAST BAND AMPLIFIER
AMPLIFICAT
ION
52
AML Series
Professional mast band amplifiers, LTE protected immune to all sig-nals from other services which share the radioelectric spectrum,such as mobile phones, wireless transmissions, terrestrial commu-nications….
APPLICATIONSuitable for individual systems or small installations, with high sensitivity and out-put power (114 dBμV), the AML is a heavy-duty amplifier, totally adapted to thenew LTE environment.
FEATURES Switchable DC pass for UHF inputs. Low noise figure in the high gain models. Allows high input levels in the low gain models LTE ready. Very low noise figure and independent from gain regulation. The mechanical solution guarantees an exceptional immunity against noise
invasion, a critical aspect for DTT reception. 3 Notch filters can be adjusted over the whole UHF band, or even in their
extremes to achieve an additional rejection to unwanted signals. F connectors. Output level Test.
Supply voltage 24 ± 10% VdcOperating temperature range – 20... +60 º C
Selective equalization 3 tuneable UHF filters in main amplification lineNotch 1 390 MHz 12
660 MHz 7Notch 2 445 MHz 16
720 MHz dB 7Notch 3 600 MHz 4
975 MHz 11
MODEL AML 210 AML 230 AML 240 AML 410 AML 430 AML 440
Reference 36601 36603 36604 36611 36613 36614Nbr. of inputs 1 3 4 1 3 4Bands UHF* FM BIII‐DAB UHF* FM BIII‐DAB UHF* UHF* UHF* FM BIII‐DAB UHF* FM BIII‐DAB UHF* UHF*Gain dB 25 15 15 25 15 15 25 25 38 28 28 38 28 28 38 38Gain regulation dB 15 20 20 15 20 20 15 15 15 20 20 15 20 20 15 15Output level DIN 45004B-60 dBµV 108 114Noise figure dB 3 8 8 4 8 8 7 7 3 7 8 3 7 8 6 6Rejection out of band dB Compliance with EN 50083-2 “Antenna Input Resistance”, LTE ReadyTest output dB -30 — -30 —Consumption mA 50 80DC pass mA 45 — 45 — 45 45 — 45 — 45Dimensions mm 170 x 105 x 50Weight Kg 0,355
REF. KIT COMPOSITION
36631 AML 410 K AML 410 + power supply
36633 AML 430 K AML 430 + power supply
36634 AML 440 K AML 440 + power supply
KITS AVAILABLE:
LTE 700 PROTECTED MAST BAND AMPLIFIER
AMPLIFICAT
ION
53
AML 500 Series
Professional mast band amplifiers, LTE protected (700 MHz band -second Digital Dividend) immune to all signals from other serviceswhich share the radioelectric spectrum, such as mobile phones,wireless transmissions, terrestrial communications…
APPLICATIONSuitable for individual systems or small installations, with high sensitivity and outputpower (114 dBµV), the AML is a heavy-duty amplifier, totally adapted to the new LTEsignals of the second Digital Dividend.
FEATURES Very low noise figure and independent from gain regulation. Low noise figure in the high gain models. Allows high input levels in the low gain models. LTE ready. The mechanical solution guarantees an exceptional immunity against noise
invasion, a critical aspect for DTT reception. F connectors. Output level Test.
Supply voltage 24 ± 10% VdcOperating temperature range – 20... +60 º C
MODEL AML 530
Reference 36651
Nbr. of inputs 3
Bands FM BIII-DAB UHF (470 -694 MHz)
Gain dB 28 28 38
Gain regulation dB 20 20 15
Output level DIN 45004B-60 dBµV 114
Noise figure dB 7 8 3
Rejection out of band dB Compliance with EN 50083-2 “Antenna Input Resistance”, LTE Ready
Test output dB –30
Consumption mA 80
DC pass mA — — 45
Dimensions mm 170 x 105 x 50
Weight Kg 0,355
REF. KIT COMPOSITION
36656 AML 530 K AML 530 K + power supply
KITS AVAILABLE:
54
AMPLIFICAT
ION
MAST AMPLIFIER
AMS 100 Series
Terrestrial signal mast amplifier with SAT IF mix.
APPLICATIONSingle home installations.
FEATURES Terestrial VHF and UHF inputs. Satellite mix input. Noise figure independent of gain regulation. F connectors. Broad input level range.
MODEL AMS 100
Reference 36645Nº of inputs 3
Bands VHF UHF SAT47÷230 470÷790 950÷2150
Gain dB 24 33 –2Gain regulation dB 20 20 —Output level DIN 45004B-60 dBµV 110 —Input / output impedance Ω 75Test output dB –30Consumption mA 85Dimensions mm 115 x 65 x 100Weight Kg 0,215
POWER SUPPLY
12V power supply with set-top-box presence detection. In thatcase the set-top-box feeds theamplifier.
MODEL FA 301 S
Reference 85060
Number of outputs 1
Band 5 ÷ 862
Supply voltage V 12V and 13/17V through the STB
Gain regulation mA 300
Dimensions mm 110 x 40 x 120
Weight Kg 0,215
FA 301FM
(Ref. 80025)
AMS 130
FA
SAT STB
TV
UHF VHF SAT OUT
TV/STBANT
Passiverhombus
(Ref. 84392)
LNBuniversal
(Ref. 86129)
APPLICATION EXAMPLE
MAST AMPLIFIER KIT
AMPLIFICAT
ION
55
AMB 200 K Series
Kit made up of a mast amplifier + power supply, specially designedto receive DTT signals with maximum quality.
APPLICATIONSuitable for individual systems or small installations.
FEATURESAmplifier: Separate level adjustment for each input. Low noise figure. "F" type connectors. LTE ready. Circuit housed in a shielded metal box that offers a high degree of immunity
against radio-electric interference.
Power supply: Two outputs in a shielded circuit. Low consumption. Small size. Protected against short-circuits. With ON indicator led.
Packing dimensions 112 x 112 x 98 mmWeight 0,5 Kg
AMPLIFIER
MODEL AMB 212 DK AMB 222 DK AMB 223 DK
Reference 36412 36423 36416
Nº. of inputs 1 2
Bands BIII-DAB; UHF BIII-DAB UHF BIII-DAB UHF174-230; 470-790 174-230 470-790 174-230 470-790
Gain dB 20; 27 20 27 28 36
Gain regulation dB VHF 15 / UHF 15
Noise figure dB 6; 4 6 4 6 4
Return losses dB –10
Output level DIN 45004B – 60 dBµV 110
Input/output impedance Ω 75
Current drawn mA 75 97
Supply voltage Vdc 24 ± 10%
Operating temperature ºC –20 ÷ 60
POWER SUPPLY
MODEL FK 02
Reference 66102
Output voltage Vdc 24 ± 10%
Output current mA 100
Nº. of outputs 2
Through losses dB 4
Return losses dB –10
Input-output impedance Ω 75
Input voltage VAC 195 ÷ 265
Operating temeperature ºC 0 ÷ 50
56
POWER SUPPLY
AMPLIFICAT
ION
FA 152 / 154 Series
Supply voltage 195 ÷ 265 VacOperating temperature 0 ÷ 50 ºC
Power supply for mast amplifiers.
APPLICATIONIndividual systems and small installations. Compatible with the requirements forDigital Terrestrial TV and High Definition TV.
FEATURES High performance switched power supply, which provides a high output current
with less consumption. Modern design and small size, making it easier to install. "F"-type connectors. The 4-output FA 154 model avoids having to include an external splitter in
installations with up to 4 connections. Protected against short-circuits. With an ON indicator led.
MODELO FA 152 FA 154
Reference 66106 66107
Number of outputs 2 4
Frequency range MHz 5 ÷ 862
Through losses dB 4 7
Output voltage Vdc 24 ± 10%
Max. output current mA 150
Input / output impedance Ω 75
Packing dimensions mm 140 x 97 x 51
Weight Kg 0,26 0,36
220 VAC
TV
HI-FI
AML 440
FA 152
BIIIUHF UHF FM
75 Ω
24 VDC
@ktive
AMB 700 + FA 152
57
LTE INDOOR AMPLIFIERS
AMPLIFICAT
ION
Self-powered broadband amplifier for indoor use.
APPLICATIONSuitable for individual digital terrestrial TV installations with several TV sets faraway from the main socket. LTE ready.
FEATURES Circuit in metal box, with high degree of shielding. Switching power supply, which reduces consumption and inner temperature
and guarantees a long life product. Modern and reduce-sized design, that allows an easy installation. AD 420 Plus LTE: independent gain regulation in UHF and VHF. AD 540 Plus LTE: Slope gain to compensate the coaxial cable losses. LTE ready.
AD 420 Plus LTE-DC /AD 540 Plus LTE
MODEL AD 420 Plus LTE AD 540 Plus LTE
Supply voltage Vac 195 ÷ 265
Power consumption W 1,5
Operating temperature range ºC 0 ÷ 50
MODEL AD 420 Plus LTE AD 540 Plus LTE
Reference 36430 36428 36431 36429
Band coverage VHF UHF VHF UHF 47 ÷ 790 47 ÷ 86240 ÷ 318 470 ÷ 790 40 ÷ 318 470 ÷ 862
Gain dB 20 22 20 22 16 ÷20 (47÷790 MHz) 16 ÷20 (47÷862 MHz)
Regulation dB 17 15 17 15 16
Noise figure dB 7 5 7 5 4
Number of output 2 4
Max. output level dBµV 100
Input/output impedance Ω 75
DC pass for previous — —
Packing dimensions mm 107 x 48 x 138 (+30)
Weight Kg 0,29 0,30
AD 420 Plus LTE
AD 420 Plus LTE
TV TV
BIF HI-FI
220 V
AD 540 Plus LTE
AD 540 Plus LTE
TV TV TV TV
BIF HI-FI
220 V
58
INDOOR AMPLIFIER
AMPLIFICAT
ION
AD 4300
AD 4300220 V
RF+FI
Self-powered broadband amplifier for indoor use.
APPLICATIONSuitable for individual digital terrestrial TV installations with several TV sets locatedaway from the main socket.
FEATURES The circuit is housed in a zamak box that ensures a high level of shielding. Switching power supply, which reduces consumption and inner temperature and
guarantees a long life product. Independent regulation. Allows DC pass between any output. AD 2300: it has two independent outputs, the second one attenuated 10 dB
with respect to the first one. AD 4300: it has 4 independent outputs.
AD 2300 /AD 4300
* 950 ÷ 2300 MHz: IM3 a ‐35 dB47 ÷ 862 MHz: IM3 a ‐ 60 dB
MODEL AD 2300 AD 4300
Reference 36230 36231
Number of inputs 1
Number of outputs 2 4
Frequency range MHz RF 47 ÷ 862 SAT 950 ÷ 2150 RF 47 ÷ 790 SAT 950 ÷ 2150
Gain 47 MHz 862 MHz 950 MHz 2150 MHz 47 MHz 790 MHz 950 MHz 2150 MHz• Output 1
dB16 20 23 30 17 27
• Output 2 4 8 13 20
Max. output level DIN 4500 4B* dBµV 108 (Output 1) 114 (Output 1) 105 10596 (Output 2) 104 (Output 2 )
Gain regulation dB 20 — 20
Impedance Ω 75
Return path through loss dB 3,5 (Output 1) 10
Input / output connectors F(f)
Max. current drawn A 0,5
Packing dimensions mm 165 x 92 x 60 148 x 130 x 50
Weight Kg 0,4 0,3
Indoor amplification (RF & 1st IF SAT)
DES 4XX+
DES 4XX+
PAU
22+
BSD 203 BSD 210
1
2
DIS 4
09+
DIS 4
09+ AD 2300
MODEL AD 2300 AD 4300
Supply voltage Vac 195 ‐ 265
Power consumption W 5,5 VA 2,7
Operating temperature range ºC 0 ÷ 50
59
SELF-POWERED AUDIO/VIDEOMODULATOR
AMPLIFICAT
ION
MODEL MOD 500 N
Reference 86521 86532
BI E2-4Output frequency MHz 47÷862 BIII E5 ÷ E12
BS S11÷ S20UHF 21 ÷ 69
Output level dBµv 60 ÷ 75 (adjustable)
Passage band MHz 47 ÷ 2150
Insertion losses dB 47 ÷ 862 MHz : 2,5 862 ÷ 2150 MHz : 4
Video input level Vpp 1
Audio input level Vpp 0,15 ÷ 0,77
Connectors RF: F (f) VIDEO / AUDIO: RCA (f)
Packing dimensions mm 110 x 50 x 134
Weight kg 0,3
MOD 500 N Series
Self-powered modulator which generates an RF channel with theAudio and Video information coming from a Video, DVD, IRD, videodoor entry system, security cameras, etc.
APPLICATIONThis modulator enables the reception of a signal coming from a receiver with Audioand Video output, on a TV set without Audio and Video input. The antenna signalfrom an outlet socket can be combined with a newly generated channel and bothare delivered at the output, thus enabling their coaxial cable distribution throughoutthe dwelling.
FEATURES Compact design, making it easy to install. The output channel is easily programmed by two buttons and an alphanumerical
display. Audio volume can be adjusted to be equalised with the volume of other
programmes. Incorporates a video-test bar generator making TV tuning easier. Multi-standard and multi-band, with one single model covering all standards
and channels. A PLL circuit ensures high stability of the output channel.
Supply voltage 198 ÷ 250 Vac
Consumption 2,5 VA
Operating temperature range 0 ÷ 50º C
MOD 500 N
75 ΩRF-SAT
VIDEOAUDIODVD
IRD
VideoCamara
230 VAC
APPLICATION EXAMPLE
60
DISTRIBUTION AMPLIFIERS
AMPLIFICAT
ION
Amplifiers specially designed for the distribution of the RF and 1st IFSAT signal.
APPLICATIONDesigned to work under adverse weather conditions, where a robust amplifier isneeded.
FEATURES Their circuit is integrated in a Zamak box, which ensures correct operation
of the amplifier, complies IP 63 standard. Allow return path operation and have slope control for the direct way. The DWBA 415 model is a double extension amplifier, valid for a two-cable
system with two independent satellite TV circuits and a common one forterrestrial TV, in addition to the return path.
The amplifier has been optimised by specific circuits which protect it againsttelecommunications services on adjacent frequency bands.
Integrates a switch mode power supply to reduce the inside temperature andhelp extend the life of the equipment.
SABAL Series
Supply voltage 230 Vac ± 15 %
Operating temperature range 0 ÷ 50º C
* 950 ÷ 2300 MHz: IM3 a – 35 dB5 ÷ 862 MHz: IM3 a – 60dB
** DA 353 A (Ref. 35922): 5 ÷ 66 return path** DA 354 A (Ref. 35925): 5 ÷ 66 return path** WBA 433 A (Ref. 35932): 5 ÷ 66 return path** D WBA 415 A (Ref.35935): 5 ÷ 66 return path
MODEL DA 353 DA 354 WBA 433 D WBA 415
Reference 35920 35924 35930 35934
Numbers of inputs 1 1 1 2
Band coverage MHz 5 ÷ 30** 47 ÷ 862 5 ÷ 30** 47 ÷ 862 5 ÷ 30** 47 ÷ 862 950 ÷ 2300 5 ÷ 30** 47 ÷ 862 950 ÷ 2300
Max. output level * dBµV 117 116 117 121(IM2= — 116 117 — 117 125115 dBµV)
Input / output impedance Ω 75
Return losses dB 15 10 15 10 15 10 6 15 10 6
Gain dB 15 35 15 35 – 2 35 34 - 41 – 2 35 34 - 41
Level adjustment dB 20 20 20 20 — 20 20 — 20 20
Equalisation- Variable dB — 20 — 20 — 0-20 — — 0-18 —- Switchable — — — — — — 7/14 — — 7/14
Test output level dB 1 IN - 1 OUT 1 IN - 1 OUT 1 IN - 1 OUT 2 OUT
TEST output attenuation dB 30
Noise figure (typ.) dB 9 6 9 6 — 6,5 8,5 — 6,5 8,5
Input / output connectors F (f)
Protection rating IP63
Power consumption VA 17 27,5
Packing dimensions mm 280 x 175 x 60
Weight Kg 3,1 3,2
61
RF DISTRIBUTION AMPLIFIER
AMPLIFICAT
ION
SAB Book
RF distribution amplifier (47 to 862 MHz).
APPLICATIONDesigned as a distribution amplifier for medium size buildings.
FEATURES The circuit is housed in a single-part metal case. High linearity. DC pass for pre-amplifier powering. Switchable equalization12dB. 10dB input switchable attenuation for high input levels. Test output for measurements.
MODEL SAB book
Reference 35960 35961
Number of inputs 1
Bandwidth MHz 47÷ 862
Gain dB 37
Regulation dB 20
Switchable attenuator dB 10
Switchable equalization dB 12 (47 MHz)
Noise figure (max. gain) dB 5,5
Input level without attenuation dBµV 40 ÷ 75 (50 ÷85)*
Output level DIN 45004 B (-60 dB) dBµV > 120
Return losses IN/OUT dB > 10
TEST output dB – 30
DC pass 12V 12 V 100mA switchable
Shielding dB class A
Packing dimensions mm 290 x 156 x 47
Supply voltage 185 ÷ 265 Vac
Power consumption 7W (70mA)
Operating temperature range – 0 a 50 ºC
UHF UHF UHF BIII FM
UCF 300
AUX.
SAB book
SAB book
SAB book
SAB book
EXAMPLEMicroMATV EVO + SAB book
IC N001F
AML200
@ktive
*10 dB attenuator ON
62
DTT
RECEIVERS
HIGH & STANDARD DEFINITION DTT RECEIVER
Tedi 5000 HD
MODEL Tedi 5000 HD
Reference 86537Power supply voltage 90 ~ 250V; 50/60HzStandby 0,5 W MAX.Max. current 10 WInput impedance 75 OhmInput connector RF IEC female, 9,5mmInput frequency VHF:173.5MHz - 230MHz UHF:474MHz - 866MHzInput level 64QAM:-78,5 ~ -8,75dBm /16QAM:-84 ~ -8,75dBm / QPSK:-90,3 ~ -8,75dBmRF channel bandwidth 6, 7, 8 MHzHDMI output 19 PIN female; HDMI 1.3bInput connector IR minijack 3,5mmUSB USB 2.0Constellation QPSK, 16QAM, 64QAMVideo decode MPEG2 ISO/IEC 13818-2 MP@ML, H.264 (MPEG4 part 10) 4.1/MPEG-2 MP@HLVideo resolution 480i, 480p, 576i, 576p, 720p, 1080i, 1080pAudio decode MPEG-1, MPEG-2 (Layer I/II), MP3, AC-3 (Dolby Digital),AAC-LC,WMAAudio mode Left/Right/Stereo/MonoOperating temperature range º C 0-40Weight kg 0,90
High & standard definition DTT Receiver -DVB-T/T2, MPEG-4, MPEG-2, HDMI, SCART.
FEATURES DVB-T/T-2, MPEG-4, MPEG-2 standard. Hotel application special software USB 2.0 port. HDMI 1.3b output. “Time Shift” via USB 2.0. with recording option. Media player: plays photos, music, videos.. (MP3, JPEG, BMP and OGC files). Screen-format 16:9/4:3. DVB EN300743 teletext and DVB ETS300472 teletext by VBI and OSD. Parental lock. Auto save function for last channel used. Low consumption.
HDMISCART
63
TAP-OFFS AND SPLITTERS1GHZ
Tap-offs and splitters with “F” connector totally shielded.
APPLICATIONAnalogue TV Installations, both individual or community.
FEATURES • TAP- OFFS with 2 and 4 outputs.
• Splitters with 2 and 4outputs. DC pass:
• DC block
REP / DER 1GHz Series
REP 204 C REP 408 C REP 612 C
85470 85472 85474
2 4 6
5 ÷ 1000
— — —
3,6 7,1 9,53,6 7,5 9,53,8 8 10,54 8 1120 20 1822 22 1822 22 1822 22 18
20
–110
115 x 105 x 57 160 x 105 x 57 205 x 125 x 67
0,50 0,60 1,10
MODEL
Reference
Nr. of outputs
Covered band MHz
Tap Loss 5 - 1000 MHz dB(± 0,5 dB)5 - 47 MHz
Through loss 47 - 470 MHzdB470 - 862 MHz
862 - 1000 MHz
Output 5 - 47 MHz
isolation 47 - 470 MHz dB470 - 862 MHz862 - 1000 MHz
Return losses 5 - 1000 MHz dB
Screening efficiency dB
Packing dimensions (10 u.) mm
Weight (10 u.) Kg
SPLITTERS
DER 214 C DER 217 C DER 223 C DER 226 C DER 414 C DER 417 C DER 423 C DER 426 C
85480 85481 85482 85483 85485 85486 85487 85488
2 4
5 ÷ 1000
14 17 23 26 14 17 23 26
1,5 1,4 1,1 1,1 3,7 1,4 1,2 1,22 1,5 1,2 1,2 3,8 1,5 1,2 1,22 1,5 1,4 1,4 4 1,8 1,6 1,62,3 1,7 1,5 30 4,2 2 1,8 1,824 27 30 30 24 25 28 3024 27 30 30 24 25 28 3024 27 30 30 24 25 28 3024 27 28 28 24 25 28 30
20 20 20 20 20 20 20 20
–110
160 x 105 x 57 205 x 105 x 65
0,60 0,70
MODEL
Reference
Nr. of outputs
Covered band MHz
Tap Loss 5 - 1000 MHz dB(± 0,5 dB)5 - 400 MHz
Through loss 400 - 500 MHzdB500 - 600 MHz
600 - 1000 MHz5 - 400 MHz
Output 400 - 500 MHz dBisolation 500 - 600 MHz
600 - 1000 MHz
Return losses 5 - 1000 MHz dB
Screening efficiency dB
Packing dimensions (10 u.) mm
Weight (10 u.) Kg
TAP-OFFSDISTR
IBUTION
TAP-OFFS AND SPLITTERSWITH “F” CONNECTOR
DISTR
IBUTION
64
Tap-offs and splitters with “F” connector totally shielded.
APPLICATIONAnalogue TV installation, both individual or community.
FEATURES • TAP- OFFS with 1, 2, 4, 6 and 8 outputs.
• Splitters with 2, 3, 4, 6 and 8 outputs.
REP / DER 2GHz Series
REP 204 REP 307 REP 409 REP 613 REP 815 DER 110 DER 115 DER 120 DER 125 DER 210 DER 215 DER 220 DER 225
85261 85262 85263 85264 85265 85266 85267 85268 85269 85270 85271 85272 85273
2 3 4 6 8 1 2
5 ÷ 2300
— — — — — 10 15 20 25 10 15 20 25
4 6,5 7,5 10,5 11 3 1,3 1,1 1 3,5 2,5 1,5 14 7,5 8 11 12 1,8 1,5 1,1 1 3 2,2 1,5 15,5 9 9,5 14,5 15,5 2,2 2,2 1,9 1,8 3,5 3 2,8 1,76 10 10,5 15 16 2,2 2,2 2,2 2,1 4 3 3 2,1— — — — — 25 25 27 30 20 25 30 35— — — — — 24 24 25 27 23 22 25 35— — — — — 23 23 23 24 18 22 22 28— — — — — 23 23 23 24 18 21 22 2620 20 21 22 24 — — — — 40 45 60 2221 21 21 22 22 — — — — 30 35 45 2220 21 21 21 21 — — — — 28 30 32 2220 20 21 20 21 — — — — 28 30 32 22
12106555
115x105x57 160 x 105 x 57 205 x 125 x 67 115 x 105 x 57 160 x 105 x 57
0,50 0,60 1,10 0,50 0,60
MODEL
Reference
Nr. of outputs
Covered band MHzTap Loss 5 - 2300 MHz dB(± 0,5 dB)
5 - 47 MHz
Through loss 47 - 862 MHzdB950 - 2150 MHz
2150 - 2300 MHz5 - 47 MHz
Directional 47 - 862 MHz dBisolation 950 - 2150 MHZ
2150 - 2300 MHz5 - 47 MHz
Output 47 - 862 MHz dBisolation 950 - 2150 MHZ
2150 - 2300 MHzReturn 5 - 862 MHz dBlosses 950 - 2150 MHzMin. secreening 5 - 862 MHz dBfactor 950 - 2150 MHzPacking dimensions (10 u.) mm
Weight (10 u.) Kg
SPLITTERS TAP-OFFS
DER 410 DER 415 DER 420 DER 425 DER 615 DER 620 DER 625 DER 815 DER 820 DER 825
85274 85275 85276 85277 85278 85279 85280 85281 85282 85283
4 6 8
5 ÷ 2300
10 15 20 25 15 20 25 15 20 25
4 2 1 1 3,5 1,5 0,5 3,5 1,5 14 2,5 1 1 4 2 1,5 4 2 15 4 2 2 5 4,5 3,5 5 3,5 25,5 4,5 3 2 5,5 5 5 5,5 3,7 2,525 30 38 45 25 30 30 25 30 3027 28 30 32 22 25 30 22 25 3025 25 25 25 22 25 25 22 25 2525 25 25 25 21 24 24 20 24 2423 23 23 23 22 25 25 22 27 2722 22 22 22 22 22 20 22 22 2221 22 22 22 22 22 20 22 22 2221 21 21 21 16 16 16 16 18 18
12106555
160 x 105 x 65 205 x 125 x 67
0,70 1,10
MODEL
Reference
Nr. of outputs
Covered band MHzTap Loss 5 - 2300 MHz dB(± 0,5 dB)
5 - 47 MHz
Through loss 47 - 862 MHzdB950 - 2150 MHz
2150 - 2300 MHz5 - 47 MHz
Directional 47 - 862 MHz dBisolation 950 - 2150 MHZ
2150 - 2300 MHz5 - 47 MHz
Output 47 - 862 MHz dBisolation 950 - 2150 MHZ
2150 - 2300 MHzReturn 5 - 862 MHz dBlosses 950 - 2150 MHzMin. secreening 5 - 862 MHz dBfactor 950 - 2150 MHzPacking dimensions (10 u.) mm
Weight (10 u.) Kg
TAP-OFFS
65
DISTR
IBUTION
Shielded tap-offs and splitters with saddle & clamp, suitable fordigital signal distribution in community installations.
APPLICATIONAnalogue and Digital Terrestrial TV Installations, both individual or community.
FEATURES Maximum efficiency with minimum output level at headend. Same level between users in the same floor. Linear attenuation in the whole band. High signal levels can be used thanks to a special shielding design. Easy to set up. Valid for reduced space installations. Valid for DiseqC signals.
CONNECTIONS
DIS 204 S DIS 307 S DIS 409+ DIS 513+ DES 107 S DES 111 S DES 116 S DES 120 S
85357 85358 85355 85356 85359 85360 85361 85362
2 3 4 5 13/25 ÷ 2300
3,5 6,5 7,5 7,5 / 11 3,5 2 1,4 1,13,5 6,5 7,5 7,5 / 11 2,5 1,7 1,4 1,14 6,5 7,5 8 / 11,5 2,5 1,7 1,4 1,14,5 7,5 8,5 9 / 12,5 3 2 1,7 1,35,5 8,5 9,5 10 / 13 3,5 2,3 2 1,55,5 8,5 9,5 10,5 / 14 3,5 2,3 2 1,5
7 11 16 207 11 16 207 11 16 207 11 16 207 11 16 207 11 16 2025 25 28 3320 20 25 28
24 24 24 24 — — — —22 22 22 22 — — — —14 14 14 12 14 18 18 1812 14 14 14 14 15 15 1513 12 12 14 14 18 18 1812 12 12 12 14 15 15 15
14 18 18 1814 15 15 15
NO NO NO NO SI SI SI SIYES YES YES YES SI SI SI SI
NO NO NO NONO NO NO NO— — — —
118 x 108 x 61 185 x 90 x 50 118 x 108 x 61
0,66 0,85 0,66
MODEL
Reference
Nr of outputs
Covered band MHz5 - 47 MHz
47 - 550 MHzIN-OUT 550 - 862 MHzInsertion loss 950 - 1550 MHz dB
1550 - 2150 MHz2150 - 2300 MHz
5 - 47 MHz47 - 550 MHz
IN-TAP 950 - 1550 MHzTap loss 950 - 1550 MHz dB
1550 - 2150 MHz2150 - 2300 MHz
Isolation 47 - 950 MHz dBOUT-TAP 950 - 2150 MHzOUT-OUT 47 - 862 MHz dBTAP-TAP isolation 950 - 2150 MHzIN 47 - 862 MHz dBReturn loss 950 - 2150 MHzOUT 47 - 862 MHz dBReturn loss 950 - 2150 MHzTAP 47 - 862 MHz dBReturn loss 950 - 2150 MHzCD pass IN - OUT24 VDC, 0, 5A, 22 KHz OUT - IN
CD pass IN - TAP24 VDC, 0, 5A, 22 KHz TAP - IN
TAP-TAPPacking dimensions (10 u.) mm
Weight (10 u.) Kg
PE-DES+ PI DES/DIS+SREF.: 85016 MODEL PI-DES PE-DES + PI DES/DIS + S
Reference 85013 85014 85016Packing dimensions mm 380 x 160 x 160 47 x 110 x 155 92 x 55 x 285Weight Kg 1,1 0,4 0,3
SPLITTERS TAP-OFFS
REF.: 85014
PI DESREF.: 85013
+ SERIES MODELS
TAP-OFFS AND SPLITTERS
DES / DIS Series
66
DISTR
IBUTION
TAP-OFFS AND SPLITTERS
Shielded tap-offs and splitters with saddle & clamp, suitable fordigital signal distribution in community installations.
APPLICATIONAnalogue and Digital Terrestrial TV Installations, both individual or community.
FEATURES Maximum efficiency with minimum output level at headend. Same level between users in the same floor. Linear attenuation in the whole band. High signal levels can be used thanks to a special shielding design. Easy to set up. Valid for reduced space installations. Valid for DiseqC signals.
CONNECTIONS
DES 211 S DES 216 S DES 220 S DES 225 S DES 411+ DES 416+ DES 420+ DES 425+
85374 85375 85376 85377 85380 85381 85382 85383
2 4
5 ÷ 23002,5 1,2 0,7 0,5 4 1,8 0,9 0,62,2 1,1 0,8 0,5 3,5 1,8 0,9 0,62,4 1,1 0,8 0,6 4 1,9 0,9 0,72,9 1,5 1 1 4,2 2,8 1,4 1,13,2 1,5 1,2 1,4 4,4 3,2 1,9 1,63,7 2 1,5 1,8 4,5 3,5 2 1,711 16 21 25 11 15,5 20 2511 16 21 25 11 16 20 2511 16 21 25 11 16 20 2511 16 21,5 25 12 16 20 2511,5 16,5 21,5 25 13 16 20 25,511,5 16,5 21,5 25,5 13 16,5 20,5 25,523 24 25 25 23 25 25 2520 21 25 25 23 25 25 2521 22 22 25 21 21 22 2121 22 22 25 21 21 22 2317 20 20 22 15 16 20 2220 20 25 17 18 18 18 1920 20 25 22 20 22 23 2517 16 17 15 16 18 17 1612 13 17 16 18 19 21 2012 12 12 12 16 16 16 16
YESYESNONONO
118 x 108 x 61 185 x 90 x 50
0,66 0,85
MODEL
Reference
Nr of outputs
Covered band MHz5 - 47 MHz
47 - 550 MHzIN-OUT 550 - 862 MHzInsertion loss 950 - 1550 MHz dB
1550 - 2150 MHz2150 - 2300 MHz
5 - 47 MHz47 - 550 MHz
IN-TAP 950 - 1550 MHzTap loss 950 - 1550 MHz dB
1550 - 2150 MHz2150 - 2300 MHz
Isolation 47 - 950 MHz dBOUT-TAP 950 - 2150 MHzOUT-OUT 47 - 862 MHz dBTAP-TAP isolation 950 - 2150 MHzIN 47 - 862 MHz dBReturn loss 950 - 2150 MHzOUT 47 - 862 MHz dBReturn loss 950 - 2150 MHzTAP 47 - 862 MHz dBReturn loss 950 - 2150 MHzCD pass IN - OUT24 VDC, 0, 5A, 22 KHz OUT - IN
CD pass IN - TAP24 VDC, 0, 5A, 22 KHz TAP - IN
TAP-TAPPacking dimensions (10 u.) mm
Weight (10 u.) Kg
PE-DES+ PI DES/DIS+SREF.: 85016 MODEL PI-DES PE-DES + PI DES/DIS + S
Reference 85013 85014 85016Dimensiones de emb. mm 380 x 160 x 160 47 x 110 x 155 92 x 55 x 285Peso Kg 1,1 0,4 0,3
DERIVADORES
REF.: 85014
PI DESREF.: 85013
+ SERIES MODELS
DES / DIS Series
67
DISTR
IBUTION
SHIELDED DIPLEXER
APPLICATIONSuitable for digital or analogue TV installations.
FEATURES DXR 216 +: diplexer with 2 inputs/1 output, suitable for splitting or combining
RF/1st IF SAT. DXR 2D +: suitable for incorporating 1st IF SAT signals. High shielding zamak chassis. Low loss and excellent frequency response. Easy to install in reduced areas.
DXR + Series
MODEL DXR 216+ DXR 2D+
Reference 86244 86243
DC pass 24 VDC, 0 5A, 2 KHZ SAT IN - OUT —
Covered bands RF SAT RF SAT
Frequency range MHz 15 ÷ 862 950 ÷ 2300 5 ÷ 862 950 ÷ 2300
Number of inputs 1 1 1 2 (SAT 1 and SAT 2)
Number of outputs 1 2 (SAT 1+ RF and SAT 2+ RF)
Through loss dB 1,7 2 5 1(950-1200 MHz 2 dB)
Rejection, SAT input to RF dB 33 25
Rejection, RF input to SAT dB 25 25
Impedance Ω 75
Return losses dB 10
Packing dimensions (10 u.) mm 185 x 90 x 50
Weight (10 u.) Kg 0,85
CONNECTIONS
INTERNAL DIAGRAM DXR 2D +
APPLICATION EXAMPLE DXR 2D +
SAT1+RF SAT2+RF
SAT1 RF SAT2
NEXUMSAT1
SAT SAT UHF UHF UHF DAB FM
SAT2
RF
68
DI ST R
I BUT ION
OUTLET SOCKETS5 ÷ 1000 MHz
* BIF 01 S model must be connected directly to tap-off or splitter.
MODEL
Reference
Technology
Band coverage MHz
Return path 5 - 68 MHzThrough losses 68 - 470 MHz dB
470 - 1000 MHz
Return path 5 - 68 MHz
Derivation losses TV 118 - 470 MHz dB470 - 1000 MHzR 87,5 - 108 MHz
Directivity TV - OUT dBR - OUT
Isolation TV - R dB
Shielding factor 40 - 470 MHz dB70 - 862 MHz
Impedance Ω
Return losses dB
Output connectors (UNE 20-523-79) RTV
Packing dimensions (20 u.) mm
Weight (20 u.) Kg
BIF 01 S BIF 01 N BIF 05 N BIF 09 N BIF 14 N BRF 00 N
85164 85159 85160 85161 85162 85163
Inductive Resistive
5 ÷ 1000
2,5 1,5 1,2 2Single* End 2,5 1 1,2 2
2,5 1 1,6 2
0,5 2,5 7,5 11 13,5 1,50,5 3 7 11 15 1,50,5 3 7 11 15,2 1,56 6 12,5 18 17 1,5
— — 15 —— — 30 —
30 —
7565
75 —
9,5 —
IEC 9,5 (f) IEC 9,5 (m)
300 x 165 x 85
1,5
BIF Series
Outlet sockets with inductive devices for adequate filtering of thesignals at the outputs, with minimum through losses.
APPLICATIONTV Installations, both individual or community to be used as end socket or forcascading.
FEATURES The circuit has a metal (zamak) housing to achieve a high degree of shielding. It has a special shielding at the input and output connections, and it is desig-
ned for easy installation. Compatible with most of the electrical devices available.
TV - FM COVER
MODEL C BIF C BIF BReference 85033 85034Colour beige whitePacking dimensions (20 u.) mm 190 x 90 x 85Weight (20 u.) Kg 0,5
SUPPLEMENT FOR SURFACE MOUNTING
Frequency (MHz) 5 65 85 862DATATV
MODEL BID 01 N BID 10 N
Reference 85167 85168Technology InductiveBand coverage MHz 5 ÷ 862Through losses 5 ÷ 862 MHz dB End 4
TV 87,5 ÷ 90 MHz 6 9Derivation 90 ÷ 862 MHz dB 5 8loss DATA 5 ÷ 65 MHz 1 3,5
87,5 ÷ 862 MHz 5 10
Directivity TV - OUT dB 15DATA - OUT 25
MODEL SS BT SS BT B
Reference 85020 85031Colour beige whitePacking dimensions (15 u.) mm 260 x 135 x 90Weight (15 u.) Kg 0,5
OUTLET SOCKET FOR DATA
BID N Series
Frequency (MHz) 5 68 87,5 108 118 1000
TV
RADIO
69
DI ST R
I BUT ION
OUTLET SOCKETS5 ÷ 2300 MHz
BSD 200 Series
Outlet sockets with inductive devices for adequate filtering of thesignals at the outputs, with minimum through losses.
APPLICATIONSuitable for Digital TV, up to 2300 MHz in individual and community installations.
FEATURES The circuit has a metal (zamak) housing to achieve a high degree of shielding. It has a special shielding at the input and output connections, and it is designed
for easy installation. The outlet’s directivity guarantees enough isolation between floors. Compatible with most of the electrical devices available.
* BSD 201 S and BSD 201 SDC model must be connected directly to tap-offs or splitter.
MODEL
ReferenceNumber of outputsBand coverage MHz
DC pass IN-OUT 300 mA maxSAT 300 mA max
5 - 30 MHzThrough losses 47 - 862 MHz
dB950 - 2150 MHz2150 - 2300 MHz
5 - 30 MHzDerivation losses 47 - 862 MHz
dB950 - 2150 MHz2150 - 2300 MHz
5 - 30 MHzDirectivity 47 - 862 MHz
dB950 - 2150 MHz2150 - 2300 MHz
5 - 30 MHzIsolation TV-R 47 - 862 MHz dB950 - 2150 MHz
2150 - 2300 MHz
Return losses5 - 862 MHz
dB950 - 2300 MHzVHF 30 - 300 MHz
Shielding factor UHF 300 - 862 MHz dBSAT 950 - 2300 MHz
Output connectors TV(UNE 20-523-79) SATPacking dimensions (20 u.) mm
Weight (20 u.) Kg
BSD 201 F DC BSD 201 S BSD 201 SDC BSD 201 S L BSD 203 N BSD 203 DC BSD 210 N BSD 210 DC BSD 215 N BSD 220 N
86222 86218 86221 85217 86205 86204 86219 86211 86215 862202
5 ÷ 2300— — — — — — yes — —yes — yes — yes — yes — —
3,0 3,0 3,0
Single* End2,5 2,0 1,82,5 3,0 3,03,0 3,0 3,0
0,5 2,0 10 15,0 16,01 3,0 11,5 15,0 20,01 3,0 12 16,0 20,01 3,0 12,5 16,0 22,0— — 15 23 25— — 22 23 25— — 18 20 25— — 20 20 2330 30 30 25 3515 15 25 25 3015 15 15 15 2518 18 25 20 30
106756555
IEC 9,5 (f) IEC 9,5 (m)F(f) IEC 9,5 (f)
300 x 165 x 85
2
Frequency (MHz) 5 862 950 2300TVSAT
TV - SAT COVER
MODEL C BSD C BSD B
Reference 86230 86231
Colour beige white
Packing dimensions 20 u. mm 190 x 90 x 85
Weight 20 u. Kg 0,5
SUPPLEMENT FOR SURFACE MOUNTING
MODEL SS BT SS BT B
Reference 85020 85031
Colour beige white
Packing dimensions 15 u. mm 260 x 135 x 90
Weight 15 u. Kg 0,5
70
DISTR
IBUTION
OUTLET SOCKETS5 ÷ 2300 MHz
BSD 400
Outlet sockets for cascade mounting.
APPLICATIONSuitable for renovation of inhabited housing. Serial or cascade mounting. Selectthe model according to its derivation losses and the required level in theinstallation.
FEATURES IN-OUT DC pass and at the SAT output (IEC female). 5÷2300 MHz output in male and female IEC connectors. Easy installation. High screening factor.
Frequency (MHz) 5 862 950 2300
TV
SAT
TV - SAT COVER
MODEL C BSD C BSD B
Reference 86230 86231
Colour beige white
Packing dimensions (20 u.) mm 190 x 90 x 85Weight 20 u. Kg 0,5
SUPPLEMENT FOR SURFACE MOUNTING
MODEL SS BT SS BT B
Reference 85020 85031
Colour beige white
Packing dimensions (15 u.) mm 260 x 135 x 90
Weight 15 u. Kg 0,5
MODEL
Reference
Number of outputs
Band coverage MHz
DC passIN-OUT 300 mA max
SAT 300 mA max5 - 30 MHz
Through losses47 - 862 MHz
dB950 - 2150 MHz2150 - 2300 MHz
5 - 30 MHz
Derivation losses47 - 862 MHz
dB950 - 2150 MHz2150 - 2300 MHz
5 - 30 MHz
Directivity47 - 862 MHz
dB950 - 2150 MHz2150 - 2300 MHz
5 - 30 MHz
Isolation TV-R47 - 862 MHz
dB950 - 2150 MHz2150 - 2300 MHz
Return losses5 - 862 MHz
dB950 - 2300 MHz VHF 30 - 300 MHz dBShielding factor UHF 300 - 862 MHzSAT 950 - 2300 MHz
Output connectors (UNE 20-523-79) TVSAT
Packing dimensions (20 u.) mm
Weight (20 u.) Kg
BSD 403 DC BSD 411 DC BSD 416 DC BSD 420 DC BSD 425 DC
86223 86224 86225 86226 86227
2
5 ÷ 2300— YES
YES
Final3,0 1,4 1,1 0,92,5 1,2 1,0 0,9
End 3,0 2,2 2,1 2,03,5 2,5 2,4 2,2
4,5 11,0 16,5 21,5 25,03,5 11,0 16,5 21,5 25,05,5 11,0 16,5 21,5 25,06 11,0 16,5 21,5 25,0— 20 23 30 30— 23 23 30 30— 18 20 20 20— 16 17 20 205 17 17 17 2010 20 20 20 2512 18 18 18 2012 18 18 18 20
10 1410756555
IEC 9,5 (m)IEC 9,5 (f)
300 x 105 x 85
2
Series
71
DISTR
IBUTION
OUTLET SOCKETS
Outlet sockets with 3 outputs TV, Radio and SAT.
APPLICATIONSuitable for Digital TV, up to 2300 MHz in individual and community installations.
FEATURES The circuit has a metal (zamak) housing to achieve a high degree of shielding. It has a special shielding at the input and output connections, and it is
designed for easy installation. The outlet´s directivity guarantees enough isolation between floors. Compatible with most of the electrical devices available. Individual box with plastic cover, surface mounting frame and accessories
bag.
Frequency (MHz) 5 68 88 108 125 862 950 2300
TV
RADIO
SAT
BSD 300 / BSD 300 SB Series
MODEL
Reference
Nr of outputs
Band coverage MHz
DC pass
Through losses 5 - 2300 MHz dB
TV 5 - 68 MHz
Derivation losses125 - 862 MHz
dBFM 88- 108 MHzSAT 950 - 2300 MHz
5 - 68 MHz
Isolation FM-TV 88 - 108 MHzdB125 - 862 MHz
FM-SAT 88 - 108 MHz
TV-SAT 5 - 860 MHz950 - 2300 MHz
TVOutput connectors FM
SAT
Packing dimensions (20 u.) mm
Weight (20 u.) Kg
BSD 301 (Final) BSD 301 SB (Final) BSD 310 (Cascade) BSD 310 SB (Cascade)
86233 86236 86234 86237
3 (TV / FM / SAT)
5 ÷ 2300SAT-IN SAT-IN / OUT-IN
— 51 101,5 101 102 10
202020202020
IEC 9,5 mm (m)IEC 9,5 mm (f)
F (f)300 x 165 x 85
2
MODEL OSF 001
Reference 86235
Impedance Ω 75
Return losses dB < 12
Insertion losses dB < 0,1
Size mm 86 x 86
OSF 001
72
DISTR
IBUTION
COAXIAL CABLES
CCF Series
CCF TRA
CCF SAT-N
CCF SAT
MODEL CCF TRA CCF SAT CCF SAT E CCF SAT N CCF 019 CCF 019 E CCF 017A CCF 017A E
Reference 84111 84123 84162 84163 84104 84105 84019 84168 84169 84114 84165 Coil length 250 100/500 250 100/500 250 100/500 100/500 250 100/500 250 100/500Coil support Wood Cardboard Cardboard Cardboard Cardboard Cardboard CardboardPacking dimensions 400x400x380 270x270x660 360x360x180 270x270x660 360x360x180 270x270x660 270x270x660 360x360x180 270x270x660 360x360x180 270x270x660Peso 25,5 5/25 12,8 5/25 12,8 5/25 5/25 12,8 5/25 9 4/20Coils per pack 1 5 1 5 1 5 5 1 5 5 5CPR class F F E E F F F E E F EClass Class A Class A Class A —
Material Cu Cu Cu CCSInternal conductor Diameter mm 1,63 1,1 1 1,2
Resistance Ω/Km 9 19 23 80Material PEE PEE PEE PEEDielectricDiameter mm 7,2 4,8 4,8 4,8
Shielding: sheet Material Al / P / Al Cu / P Cu / P Al / P / Al
External conductor Material CuSn Cu Cu AlResistance Ω/Km 8 21 30 35Material PE black PVC white PE black PVC white PVC white
External cover Diameter mm 10,1 6,8 6,8 6,7Min. curvature radius mm 80 40 40 40
5 MHz 3,1 4,4 4,7 4,8100 MHz 4,4 6,2 6,5 6,7200 MHz 6,3 8 8,8 8,3300 MHz 7,7 10 10,3 10,2470 MHz 9,6 12 12,8 12,8600 MHz 10,8 14,9 14,9 15
Attenuation dB/100 m 860 MHz 13 16,9 17,8 17,91000 MHz 14 18,2 20 19,31350 MHz 16,2 21 21,6 22,41500 MHz 17,1 23,5 22,6 23,81750 MHz 18,5 24,3 26,4 25,62050 MHz 20 27 29,5 28,72150 MHz 20,5 28,6 30,9 30,4
Shielding attenuation 5-1000 MHz > 90 > 80 > 75 > 701000-3000 MHz > 85 > 75 > 70 > 65
Impedance Ω 75
Cu: Copper / PEE: Expanded Polyethylene / PE: Polyethylene / PVC: Polyvinyl Chloride / Al: Aluminum / CSS: Copper Clad Steel
Low loss cables for use in CTAV signal distribution in communitiesand individual MATV-SMATV installations.
APPLICATION• Up to more than 2GHz signal distribution. The combination of different cable
references allows to realize large installations.
FEATURES CPR marked cables up to E class. The cables with PE cover are ready for the outdoor installation under the
sunlight.
73
ACCESSORIES
ACCESSORIES
F (m) CONNECTOR HIGH SHIELDING CONNECTORS SHIELDED CONNECTOR
TYPE OF CABLE MODEL REF.
CCF 017/019/020/SAT or similar CNR MF 84012
BROAD BAND AMPLIFIER (UHF)
ADJUSTABLE ATTENUATOR
1st IF SAT LINE AMPLIFIER
TYPE OF CONNECTOR MODEL REF.
F (m) CX 75 F 84011
75 Ω F LOAD
TYPE OF CONNECTOR MODEL REF.
2 x IEC(f) - 1 x IEC (m) MB 021 85001
TWO WAY SPLITTER COMBINER
TYPE OF CONNECTOR MODEL REF.
2 x IEC(m) - 1 x IEC (f) DB 012 85002
TWO WAY SPLITTER COMBINER
FIX ATTENUATOR
AT 323 AT 020
TYPE OF CONNECTOR MODEL REF.
IEC (f)-IEC (m) AT 323 85005
IEC (f)-IEC (m) AT 020 85007
ADJUSTABLE ATTENUATOR
CONNECTOR
TYPE OF CONNECTOR MODEL REF.
IEC 9,5 (m) CNR MI S 84038
IEC 9,5 (f) CNR HI S 84039
TYPE OF CABLE MODEL REF.
CCF TRN / CCF TRA CNR F TRN 84014
TYPE OF CONNECTOR MODEL REF.
F(f)-F(m) ABF 012 85053
TYPE OF CONNECTOR MODEL REF.
F (m)-F (f) FAT 010 85041
TYPE OF CONNECTOR MODEL REF.
F(f)-F(m) ATF 020 85050
TYPE OF CONNECTOR MODEL REF.
F (f)-F (m) AL 46 86246
TYPE OF CONNECTOR MODEL REF.
IEC 9,5 (m) CNR MI 84028
IEC 9,5 (f) CNR HI 84029
ACCESSORIES
ACCESSORIES
74
ACCESSORIES
ACCESSORIES
TWO WAY SPLITTER COMBINER
Band coverage: 5 ÷ 862 MHzImpedance: 75 ΩCombining losses: 4 dBOutput isolation: 22 dB
TYPE OF CONNECTOR MODEL REF.
F (f) MD 012F 85028
TYPE OF CONNECTOR MODEL REF.
F (m) - F (m) PMD 8000 83814
F (m) - F (m) PMD FF 84031
F (m) - F (m) PMD FFN 84034
TYPE OF CONNECTOR MODEL REF.
F(f)-F(m) ICF 001 85051
TYPE OF CONNECTOR MODEL REF.
F(f)-F(f) ADF HHS 84016
TYPE OF CONNECTOR MODEL REF.
F (m)-F (f) FPA 470 85042
TYPE OF CONNECTOR MODEL REF.
— RC 075 85010
“F” ADAPTOR
Female-female F adapter (5 ÷ 2300 MHz).
75 Ω F-F COAXIAL BRIDGE
Rigid 75 Ω coaxial bridge for splitting orcombining RF signals.Raster: 47,7 mm. (Ref. 8314) 8000 SeriesRaster: 48 mm. (Ref. 84031 and 84003)
Multi-processing systemRaster: 40 mm. (Ref. 84034)
Nexum system
PMD FF
PMD FF N
LOADING RESISTOR
75 Ω resistor suitable for loading unused inputs /outputs.
HIGH PASS FILTER
Passage band: 470÷1000 MHzInsertion losses: 0,5 dBImpedance: 75 Ω
SUPPLY INJECTORSuitable for.Band coverage: 5 ÷ 2150 MHzReturn losses: –10 dBThrough losses: 0,5 dBDC pass: 1 A
TYPE OF CONNECTOR MODEL REF.
F (m) CNR MFC 85095
COMPRESSION MALE F CONNECTOR
TYPE OF CONNECTOR MODEL REF.
— UCA 01 85091
SAFETY 75 OHM CHARGE UNBLOCKINGTOOL (ref. 85090)
TYPE OF CONNECTOR MODEL REF.
— UCC 01 85097
F CONNECTOR COMPRESSION TOOL(ref. 85095)
TYPE OF CONNECTOR MODEL REF.
F (m) CXA 75 F 85090
SAFETY 75 OHM CHARGE
ACCESSORIES
75
ACCESSORIES
Surge arrester to protect the installation against atmosphericdischarges.
MODEL SAF E 100
Reference 85040
Frequency band MHz 0-2150
Insertion Losses dB 0,5
Return Losses dB 12
Impedance Ω 75
Connectors F (h)
DC spark over voltage @ 100V/s V 90
Impulse spare-over voltage @1 KV/µs 600
Impulse discharge current 10 times KA 5
Insulation Resistance at 100 Vdc GOhm 10
DC pass mA 500
SAFE 100SURGE ARRESTER 90V
SAFE 100SURGE ARRESTER 90V
SAFE 100SURGE ARRESTER 90 V
Series
APPLICATION EXAMPLE
UTP CAT 6
76
UTP
CAT
6
UTP CAT 6
8 OUTPUT PASSIVE MULTIPLEXER
RJ 45 passive multiplexer with one male inputconnector and 8 female output connectors.Made in ABS.
MODEL MUX 108 C
Reference 82551
Input connectors 1 RJ45(m)
Output connectors 1 RJ45(f)
Dimensions 93 x 55 x 28
Dimensiones de embalaje (5u.) 275 x 145 x 55
RF45 SURFACE BOX
RJ45 female connection for surface mounting.MODEL ROS 016
Reference 82550
Output connectors 1 RJ45(f)
Dimensions 54 x 40 x 30
Packing dimensions (10u.) 225 x 140 x 40
RJ45 MALE CONNECTOR
With metal shielding for crimping.MODEL CNR MRJ 45
Reference 82553
Output connectors 1 RJ45(f)
Units per packaging 10
24 CONNECTORS PATCH PANEL
For 19" RACK.MODEL BST 24C
Reference 83821
Capacity 24 connectors
Packing dimensions 500 x 100 x 50
6 RJ 45 CONNECTOR STRIP
For assembly in the patch panel BST 24C(Ref. 83821). MODEL RGL 606
Reference 82552
Capacity 6 RJ45(f)
Packing dimensions (8u.) 270 x 150 x 60
CAT 6 HOUSING
Capacity up to 4UN 19"height units. • Metal housing. • Lockable door.
MODEL CFR 48 C
Reference 83820
Capacity 8 Rack 19" unit height
Dimensions 520 x 430 x 290
UTP CAT 6
77
UTP CAT 6 cable for high speed data transmission networks.
FEATURES Cable of 4 copper wire twisted pairs. LSZH external cover. 305 meter packing. Under EN 50288-6-1 and TIA7EIA 568-B.2 standards.
CLN CA6 Series
MODEL CLN CA6
Reference 82540
MECHANICAL FEATURES
Conductor Copper wire 24 AWG / Diameter: 0,525 mm
Cover Material: PE / Diameter: 0,93 mm
Pair twisting Z
External cover Material: LSZH / Diameter: 5,9 mm / Thickness: 0,54 mm / UL 444
ELECTRICAL FEATURES
Maximum conductor DC resistance Ω/Km ≤ 93,8
Unbalanced pair DC resistance % ≤ 2
Max. mutual pair capacitance nF/100m ≤ 5,5
Impedance Ω 100 ± 15
FREQUENCY MHz 1 4 8 10 16 20 25 31.25 62.5 100 200 250
Return losses (min) dB 20.0 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1 18.0 17.3
Max. attenuation dB/100 m 2.0 3.8 5.3 6.0 7.6 8.5 9.5 10.7 15.4 19.8 29.0 32.8
NEXT (min) dB 66.0 65.3 60.8 59.3 56.2 54.8 53.3 51.9 47.4 44.3 39.8 38.3
PS-NEXT (min) dB 64.0 63.3 58.8 57.3 54.2 52.8 51.3 49.9 45.4 42.3 37.8 36.3
ELFEXT (min) dB 66.0 58.0 52.7 50.0 45.9 44.0 42.6 40.1 34.1 30.0 24.0 22.0
PS-ELFEXT (min) dB 64.0 55.0 51.0 47.8 43.0 41.0 36.8 37.1 31.1 27.0 21.0 19.0
Max. propagation delay ns/100 m 570.0 552.0 547.0 545.0 543.0 542.0 541.0 540.0 539.0 538.0 537.0 536.0
PACKING
Meters per pack m 305
Dimensions mm 400 x 400 x 210
Weight Kg 13
UTP
CAT
6
78
OPTICAL FIBRE
OPTICAL FIBRE
Fagor Electronica presents a complete range of products to distri-bute data or RF signal through fibre optics into the building.This new catalogue includes housings, sockets, connectors andcables that allow arriving the fiber to the home.
OPTICAL FIBRE
MODEL RG 008 N RG 016 N RG 048 N
Reference 42208 42216 42211
Capacity (number of adapters) 8 16 48
Dimensions mm 200 x 215 x 54 260 x 320 x 90 360 x 450 x 155
Weight Kg 0,59 1,17 3,2
MODEL RG 004 N
Reference 42202
Capacity 4 adapters
Dimensions mm 160 x 120 x 35
Weight Kg 0,17
UP TO 4 CONNECTORS SPLICE BOX
Plastic housing developed to house up to 4 opticaladaptors for interconnection of optical cables.• The splicing protection sleeves are not included.• The SC /APC adaptors are included.
MODEL RG 001 N
Reference 42231
Capacity 2 adapters
Dimensions mm 100 x 80 x 23
Weight Kg 0,08
2 CONNECTORS SPLICE BOX
Connection box for 2 adapters.• 2 SC/APC adaptors included.• Splicing protection sleeves are not included.
OPTIC FIBER DISTRIBUTION
UP TO 48 CONNECTORS SPLICE BOX. Constructed in a hard, flame retardant, and aging resistant plastic material, is
highly protected against water and dust. Ready for up to 48 SC/APC optical adapters. Include splicing protection sleeves and fittings for wall mounting. UV protected 8 and 16 models are ready for mast or wall mounting Lockable door.
79
OPTICAL FIBRE
OPTICAL FIBRE
OPTICAL FIBre
SPLICING PROTECTION SLEEVES
• Length: 45 mm.
OPTICAL FIBER CABLES• Cables of 2, 24 and 48 single mode fibres.• Excellent mechanical features, meeting the standard ITU-T G 657.
MODEL CMF 048 N CMF 024 N CMF 002 N
Reference 42348 42248 42324 42224 42302 42202
Fibre type G 657
Max. attenuation dB/Km 0,40 (1310 nm) / 0,30 (1550 nm)
Inner sheath Material Material LSFH flame retardantDiameter m 900 ± 50
Jacket Material LSFH flame retardantDiameter mm 10,5 8,5 5
Minimum bend radius 10 x diameter
Traction (N) 1000 450
Working temperature ºC –20 a +60
Packing By meter 1000 m By meter 1000 m 300 m 1000 m
Weight kg/km/cardboard 75 kg 68 kg 16 kg
Dimensions mm/km/cardboard 63 x 63 x 48 mm 64 x 64 x 49 mm 43 x 43 x 37 mm
48 FIBERS 24 FIBERS 2 FIBERS
ADAPTER
• SC/APC (f) TO SC/APC (f) adapter.• 25 unit tray.
PACKING MODEL REF.
25 unit tray ACP 01 N 42232
PACKING MODEL REF.
Unitary PGT 01 N 42201
PACKING MODEL REF.
10 unit tray CNR 01 N 42233
CONNECTORS
• Conectores montaje rápido SC/APC
PIG TAIL• 1 meter single mode fibre cable with SC/APC (m) connector.
• LSFH flame retardant material.
PACKING MODEL REF.
100 UN Bags PTR 01 N 42234
80
TECHNICAL NOTES
TECHNICAL
NOTE
S
CHANNEL DEFINITION
CHANNEL PICTURE AUDIOTV BAND CHANNEL LIMITS CARRIER CARRIER
MHz MHz MHz
Standard B Italy
BI A 52,5 - 59,5 53,75 59,25B 61 - 68 62,25 67,75
B (II) C 81 - 88 82,25 87,75B (III) D 174 - 181 175,25 180,75
E 182,5 - 189,5 183,75 189,25F 191 - 198 192,25 197,75G 200 - 207 201,25 206,75H 209 - 216 210,25 215,75H1 216 - 223 217,25 222,75H2 223 - 230 224,25 229,75
Standard D OIRT
BI I 48,5 - 56,5 49,75 56,25II 58 - 66 59,25 65,75III 76 - 84 77,25 83,75
B (II) IV 84 - 92 85,25 91,75V 92 - 100 93,25 99,75
BIII VI 174 - 182 175,25 181,75VI 182 - 190 183,25 189,75VIII 190 - 198 191,25 197,75IX 198 - 206 199,25 205,75X 206 - 214 207,25 213,75XI 214 - 222 215,25 221,75XII 222 - 230 223,25 229,75
Standard I Ireland
BI A 44,5 - 52,5 45,75 51,75B 52,5 - 60,5 53,75 59,75C 60,5 - 68,5 61,75 67,75
BIII D 174 - 182 175,25 181,25E 182 - 190 183,25 189,25F 190 - 198 191,25 197,25G 198 - 206 199,25 205,25H 206 - 214 207,25 213,25I 214 - 222 215,25 221,25J 222 - 230 223,25 229,2
Standard L France
BI 2 49,00 - 57,00 49,25 55,753 53,75 - 61,75 54,00 60,504 57,00 - 65,00 57,25 63,75
BIII 5 174,75 - 182,75 176,00 182,506 182,75 - 190,75 184,00 190,507 190,75 - 198,75 192,00 198,508 198,75 - 206,75 200,00 206,509 206,75 - 214,75 208,00 214,5010 214,75 - 222,75 216,00 222,50
Pv
Ps 1
Ps 2Sc
16 dB
10 ÷ 13 dB
7 dB
4,43 MHz
5,5 MHz
7 MHz
0,25 MHz0,75 MHz
5,74 MHz
Pv
Ps 1
Ps 2Sc
16 dB
10 ÷ 13 dB
7 dB
4,43 MHz
5,5 MHz 1,25 MHz1,25 MHz
5,74 MHz
8 MHz
Pv
Ps
Sc
16 dB
7 dB
4,43 MHz
6 MHz 0,75 MHz1,25 MHz
8 MHz
STANDARD B
STANDARD G
STANDARD IPv
Ps
Sc
16 dB
10 dB
4,43 MHz
6,5 MHz 0,25 MHz1,25 MHz
8 MHz
STANDARD L
81
TECHNICAL NOTES
TECHNICAL
NOTE
S
CCIR STANDARDS
CCIR-Standard B D G H I K L M N
Number of lines 625 625 625 625 625 625 625 525 625
Channel Bandwidth 7 8 8 8 8 8 8 6 6
Video Bandwidth (MHz) 5 6 5 5 5,5 6 6 4,2 4,2
Video sound spacing +5,5 +6,5 +5,5 +5,5 +6 +6,5 +6,5 +4,5 +4,5
Vestigial side band (MHz) 0,75 0,75 1,25 1,25 1,25 0,75 1,25 0,75 0,75
Picture modulation Neg. Neg. Neg. Neg. Neg. Neg. Pos. Neg. Neg.
Sound modulation FM FM FM FM FM FM AM FM FM
COUNTRY VHF UHF TV STANDARD
Algeria B H PALArgentina N N PAL-NAustralia B H PALAustria B G PALBahrein B G PALBelgium B H PALBulgary D K SECAMChina D K PALCyprus B G PAL/SECAMCzech Rep. D K SECAMDenmark B G PALEgypt B G; H SECAMFinland B G PALFrance L L SECAMGermany B G PALGibraltar B G PALGreat Britain I I PALGreece B G SECAMHolland B G PALHong Kong I I PALHungary D K SECAMIceland B G PALIndia B — PALIndonesia B — PALIrak B — SECAMIran B G SECAMIreland I I PALIsrael B G PALItaly B G PALJapan M M NTSCJordan B G PALKorea M — NTSCKuwait B G PALLebanon B — SECAMLibya B H SECAMLuxembourg B/L G/L SECAM/PALMalaysia B G PAL
COUNTRY VHF UHF TV STANDARD
Malta B H PALMexico M M NTSCMonaco E L/G SECAM/PALMorocco B H SECAMNigeria B G PALNorway B G PALOman B G PALPakistan B G PALPhilippines M M NTSCPoland D K SECAMPortugal B G PALQuatar B G PALRomania D K PALSaudi Arabia B G PAL/SECAMSingapore B G PALSouthafrica I I PALSpain B G PALSri Lanka B — PALSweden B G PALSwitzerland B G PALSyria B — SECAMThailand B/M — PALTunisia B G SECAMTurkey B G PALU.A.E. B G PALU.S.A. M M NTSCYemen B — PALYugoslavia B G PAL
CCIR = Comité Consultatif International des RadiocommunicationsPAL = Phase Alternation LineSECAM = Séquentielle à mémoireNTSC = National Television System Commitee
82
TECHNICAL NOTES
TECHNICAL
NOTE
S
FREQUENCY ALLOCATIONS
BI FM S Low BIII S High Hyperband BIV BV
E2-E4
S1-S10 E5-E12 S11-S21 S21-S41 E21-E37 E38-E69
47 68 87,5 108 174 230 300 470 606 862 MHz
VHF UHF
CHANNELS ACCORDING TO CCIR, B, G, I (EUROPE) STANDARDS
CHANNEL VIDEO AUDIO CENTRALCHANNEL BANDWIDTH (B) (B) FREQ.
MHz MHz MHz MHzVHF BI 2 47...54 48,25 53,75 50,5
3 54...61 55,25 60,75 57,54 61...68 62,25 67,75 64,5
VHF Bs(low) S1 104...111 105,25 110,75 107,5
S2 111...118 112,25 117,75 114,5S3 118...125 119,25 124,75 121,5S4 125...132 126,25 131,75 128,5S5 132...139 133,25 138,75 135,5S6 139...146 140,25 145,75 142,5S7 146...153 147,25 152,75 149,5S8 153...160 154,25 159,75 156,5S9 160...167 161,25 166,75 163,5S10 167...174 168,25 173,75 170,5
VHF BIII5 174...181 175,25 180,75 177,56 181...188 182,25 187,75 184,57 188...195 189,25 194,75 121,58 195...202 196,25 201,75 198,59 202...209 203,25 208,75 205,510 209...216 210,25 215,75 212,511 216...223 217,25 222,75 219,512 223...230 224,25 229,75 226,5
VHF Bs(high) S11 230...237 231,25 236,75 233,5
S12 237...244 238,25 243,75 240,5S13 244...251 245,25 250,75 247,5S14 251...258 252,25 257,75 254,5S15 258...265 259,25 264,75 261,5S16 265...272 266,25 271,75 268,5S17 272...279 273,25 278,75 275,5S18 279...286 280,25 285,75 282,5S19 286...293 287,25 292,75 289,5S20 293...300 294,25 299,75 296,5
VHFHyperband
S21 302...310 303,25 308,75 306S22 310...318 311,25 316,75 314S23 318...326 319,25 324,75 322S24 326...334 327,25 332,75 330S25 334...342 335,25 340,75 338S26 342...350 343,25 348,75 346S27 350...358 351,25 356,75 354S28 358...366 359,25 364,75 362S29 366...374 367,25 372,75 370S30 374...382 375,25 380,75 378S31 382...390 383,25 388,75 386S32 390...398 391,25 396,75 394S33 398...406 399,25 404,75 402S34 406...414 407,25 412,75 410S35 414...422 415,25 420,75 418S36 422...430 423,25 428,75 426S37 430...438 431,25 436,75 434S38 438...446 439,25 444,75 442S39 446...454 447,25 452,75 450S40 454...462 455,25 460,75 458S41 462...470 463,25 468,75 468
CHANNEL VIDEO AUDIO CENTRALCHANNEL BANDWIDTH G, I G I FREQ.
MHz MHz MHz MHzUHF
21 470...478 471,25 476,75 477,25 47422 478...486 479,25 484,75 485,25 48223 486...494 487,25 492,75 493,25 49024 494...502 495,25 500,75 501,25 49825 502...510 503,25 508,75 509,25 50626 510...518 511,25 516,75 517,25 51427 518...526 519,25 524,75 525,25 52228 526...534 527,25 532,75 533,25 53029 534...542 535,25 540,75 541,25 53830 542...550 543,25 548,75 549,25 54631 550...558 551,25 556,75 557,25 55432 558...566 559,25 564,75 565,25 56233 566...574 567,25 572,75 573,25 57034 574...582 575,25 580,75 581,25 57835 582...590 583,25 588,75 589,25 58636 590...598 591,25 596,75 597,25 59437 598...606 599,25 604,75 605,25 60238 606...614 607,25 612,75 613,25 61039 614...622 615,25 620,75 621,25 61840 622...630 623,25 628,75 629,25 62641 630...638 631,25 636,75 637,25 63442 638...646 639,25 644,75 645,25 64243 646...654 647,25 652,75 653,25 65044 654...662 655,25 660,75 661,25 65845 662...670 663,25 668,75 669,25 66646 670...678 671,25 676,75 677,25 67447 678...686 679,25 684,75 685,25 68248 686...694 687,25 692,75 693,25 69049 694...702 695,25 700,75 701,25 69850 702...710 703,25 708,75 709,25 70651 710...718 711,25 716,75 717,25 71452 718...726 719,25 724,75 725,25 72253 726...734 727,25 732,75 733,25 73054 734...742 735,25 740,75 741,25 73855 742...750 743,25 748,75 749,25 74656 750...758 751,25 756,75 757,25 75457 758...766 759,25 764,75 765,25 76258 766...774 767,25 772,75 773,25 77059 774...782 775,25 780,75 781,25 77860 782...790 783,25 788,75 789,25 78661 790...798 791,25 796,75 797,25 79462 798...806 799,25 804,75 805,25 80263 806...814 807,25 812,75 813,25 81064 814...822 815,25 820,75 821,25 81865 822...830 823,25 828,75 829,25 82666 830...838 831,25 836,75 837,25 83467 838...846 839,25 844,75 845,25 84268 846...854 847,25 852,75 853,25 85069 854...862 855,25 860,75 861,25 858
83
TECHNICAL NOTES
TECHNICAL
NOTE
S
CONVERSION TABLE
BROAD BAND AMPLIFIERSReduction of the output level for broadband amplifiers according to the number of channels.
CASCADE AMPLIFICATIONReduction of output level for broadband amplifiers according to the number of cascade amplifiers in the system.
Nr. of digital channels 2 4 5 6 8 16 24 32 64
Reduction of dB –3 –6 –7 –8 –9 –12 –14 –15 –18the output level (Rc)
Nr. of analogue channels 2 4 5 6 8 16 24 32 64
Reduction of dB 0 –3 –4 –5 –6 –9 –11 –12 –15the output level (Rc)
Nr. of amplifiers — 2 3 4 5 6 7
Reduction of dB 0 3 4,8 6 7 7,8 8,5output level (RA)
The output level of the amplifiers must be reduced according to thetable above to keep the intermodulation products at the same level.
NO = NS - RC - RA
NO = Max. operating level.NS = Output level (DIN 45004 B, IM3 –60 dB).RC = Reduction by nr. of channels.RA = Reduction by nr. of amplifiers
µV 75 Ω dBµV dBm
1 0 -1091,5 3,5 -105,52 6 -1032,5 8,0 -1013 9,5 -99,53,5 11 -984 12 -974,5 13 -96
5 14 -956 15,5 -93,57 17 -928 18 -919 19 -90
10 20 -8915 23,5 -85,520 26 -8325 28 -8130 29,5 -79,535 31 -7840 32 -7745 33 -76
50 34 -7560 35,5 -73,570 37 -7280 38 -7190 39 -70
100 40 -69150 43,5 -66,5200 46 -63250 48 -61300 49,5 -59,5350 51 -58400 52 -57450 53 -56
500 54 -55600 55,5 -53,5700 57 -52800 58 -51900 59 -50
mV 75 Ω dBµV dBm
1 60 -491,5 63,5 -45,52 66 -432,5 68 -413 69,5 -39,53,5 71 -384 72 -374,5 73 -36
5 74 -356 75,5 -33,57 77 -328 78 -319 79 -30
10 80 -2915 83,5 -25,520 86 -2325 88 -2130 89,5 -19,535 91 -1840 92 -1745 93 -16
50 94 -1560 95,5 -13,570 97 -1280 98 -1190 99 -10
100 100 -9150 103,5 -5,5200 106 -3250 108 -1300 109,5 +0,5350 111 +2400 112 +3450 113 +4
500 114 +5600 115,5 +6,5700 117 +8800 118 +9900 119 +10
1.000 120 +11
V 75 Ω dBµV dBm
1 120 +111,5 123,5 +14,52 126 +172,5 128 +193 129,5 +20,53,5 131 +224 132 +234,5 133 +24
5 134 +256 135,5 +26,57 137 +288 138 +299 139 +30
10 140 +31
dB ratio /factorx(–) dB (+) x1,0 0,0 1,00,94 0,5 1,060,89 1 1,120,84 1,5 1,190,8 2 1,250,75 2,5 1,330,71 3 1,410,67 3,5 1,50,63 4 1,60,6 4,5 1,670,56 5 1,780,53 5,5 1,880,5 6 2,00,47 6,5 2,120,45 7 2,240,42 7,5 2,370,4 8 2,50,38 8,5 2,660,35 9 2,820,33 9,5 3,00,32 10 3,160,28 11 3,550,25 12 4,00,22 13 4,50,2 14 5,00,18 15 5,620,16 16 6,30,14 17 7,10,125 18 8,00,11 19 8,90,10 20 10,00,89 21 11,20,08 22 12,50,071 23 14,10,063 24 16,00,056 25 17,80,05 26 20,00,045 27 22,40,04 28 25,00,035 29 28,20,032 30 31,60,028 31 35,50,025 32 400,022 33 450,02 34 500,018 35 560,016 36 630,014 37 710,0125 38 800,011 39 890,010 40 1000,0056 45 1780,0032 50 3160,0018 55 5620,001 60 1.000
MODEL Pag. MODEL Pag. MODEL Pag.
84
INDEX PER MODEL
INDEX PER
MODEL
MODEL Pag.
AABF 012 32
ACM 8000 14
ACP 01N 79
AD 2300 58
AD 420 PLUS LTE 57
AD 4300 58
AD 540 PLUS LTE 57
ADF HH S 74
AL 46 73
AMB 212 DK 55
AMB 222 DK 55
AMB 223 DK 55
AML 210 52
AML 230 52
AML 240 52
AML 410 52
AML 430 52
AML 440 52
AML 530 53
AMS 100 54
ANF BIII 2
ANF BIII9 2
ANF BIII13 2
ANF DAB 2
ANF FM 2
ANF FMS 2
AT 020 73
AT 323 73
ATF 020 37
AVE TWIN 41
BA 807 22
BF 800 22
BID 01 N 68
BID 10 N 68
BIF 01 N 68
BIF 01 S 68
BIF 05 N 68
BIF 09 N 68
BIF 14 N 68
BRF 00 N 68
BSD 201 S 69
BSD 201 S DC 77
BSD 201 S L 69
BSD 203 DC 69
BSD 203 N 69
BSD 210 DC 69
BSD 210 N 69
BSD 215 N 69
BSD 220 N 69
BSD 301 71
BSD 301 SB 71
BSD 310 71
BSD 310 SB 71
BSD 403 DC 70
BSD 411 DC 70
BSD 416 DC 70
BSD 420 DC 70
BSD 425 DC 70
BSR 807 23
BST N 06 32
BST N 12 32
BST N 18 32
BST 24C 76
BST 608 27
BST 708 27
BST 807 23
BST N 06 32
C BIF 68
C BIF F 68
C BSD 69
C BSD B 69
CAF 08 23
CAM 08 23
CC 01 27
CC 08 22
CC FR 08 22
CCF 017 A 72
CCF 017 AE 72
CCF 019 72
CCF 019 E 72
CCF TRA 72
CCF SAT 72
CCF SAT E 72
CCF SAT N 72
CDM 3RCA 22
CFR 48C 76
CFR 602 32
CFR 807 23
CFR N 106 32
CFR N 112 32
CFR N 118 32
CFR N 218 32
CFR N 56V 26
CIF 6000 26
CIF 7000 26
CLN CA6 77
CMD EU-ST 27
CMF 002 N 79
CMF 024 N 79
CMF 048 N 79
CNR 01N 79
CNR F TRN 73
CNR HI 73
CNR HI S 73
CNR MF 73
CNR MFC 74
CNR MI 73
CNR MI S 73
CNR MRJ 45 76
CP 01 27
CP08 22
CU 120 22
CX 75 F 27
CXA 75 F 74
D WBA 415 60
DA 353 60
DA 354 60
DB 012 73
DEN 8000 12
DER 110 64
DER 115 64
DER 120 64
DER 125 64
DER 210 64
DER 214 C 63
DER 215 64
DER 217 C 63
DER 220 64
DER 223 C 63
DER 225 64
DER 226 C 63
DER 410 64
DER 414 C 63
DER 415 64
DER 417 C 63
DER 420 64
DER 423 C 63
DER 425 64
DER 426 C 63
DER 615 64
DER 620 64
DER 625 64
DER 815 64
DER 820 64
DER 825 64
DES 107 S 65
DES 111 S 65
DES 116 S 65
DES 120 S 65
DES 211 S 66
DES 216 S 66
DES 220 S 66
DES 225 S 66
DES 411 + 66
DES 416 + 66
DES 420 + 66
DES 425 + 66
Digit 25 LTE 4
Digit 25 LTE 6u 4
DIS 204 S 65
DIS 307 S 65
DIS 409 + 65
DIS 513 + 65
DMT 8000 14
DPO 105* 5
DXR 216 + 67
DXR 2D + 67
ECU 8000 20
FA 152 56
FA 154 56
FA 301 S 54
FAC 005 49
FAC 009 49
FAC 013 49
FAC 017 49
FAT 010 37
FK 02 55
FMA 238 39
FMA 430 39
FMA 430 S 39
FMA 438 39
FMA 538 39
FMA 538 S 39
FMB 132 UK 40
FMB 410 40
FMB 430 40
FMB 440 40
FMC 1308 47
FMC 1312 47
FMC 1316 47
FMC 1324 47
FMC 1332 48
FMC 1708 48
FMC 1712 48
FMC 1716 48
FMC 1724 48
FMC 1732 48
FMC 508 45
FMC 512 45
FMC 516 45
FMC 524 45
FMC 532 45
FMC 908 46
FMC 912 46
FMC 916 46
FMF 1308 47
FMF 1312 47
FMF 1316 47
FMF 1324 47
FMF 1332 47
FMF 1708 48
FMF 1712 48
FMF 1716 48
FMF 1724 48
FMF 1732 48
FMF 508 45
FMF 512 45
FMF 516 45
FMF 524 45
FMF 532 45
FMF 908 46
FMF 912 46
FMF 916 46
FMU 402 50
FPA 470 74
FSP 005 49
FSP 009 49
FSP 017 49
FTP 1717 49
FTP 1734 49
FTP 505 49
FTP 510 49
FTP 909 49
FTP 918 49
HA 503 38
HA 504 38
HA 505 38
HAN 8000 12
HTT 102 42
ICF 001 32
IFA 3000 Book 41
IFA 6000 S 26
IFA 7000 S 26
IFL 6000 26
IFL 7000 26
B
C
D
E
F
H
I
MODEL Pag. MODEL Pag. MODEL Pag. MODEL Pag.
85
INDEX PER MODEL
INDEX PER
MODEL
IFA 400 30
KIT PO 064 6
KIT PO 081 6
LBF - E 694 51
LBF - E 766 51
LBF - E 782 51
LBF 694 51
LBF 758 51
LBF 766 51
LBF 774 51
LBF 774 TV 51
LBF 782 51
LBF 790 51
LNB 201 Universal 7
LNB 222 TWIN 7
LNB 244 QUAD 7
LNB 248 Octo 7
LNB 281 Monob. S 7
LNB 182 Monob. TWIN 7
LNB 184 Monob. QUAD 7
LNB 204 QUATTRO 7
LPU 8000 21
MB 021 73
MCU 8000 20
MD 012 F 74
MDIN 5 27
MEG 8000 20
MGG 8000 20
MicroMATV EVO D 100 34
MicroMATV EVO D 100C 34
MicroMATV EVO D 200 34
MicroMATV EVO D 200C 34
MicroMATV EVO D 300 34
MicroMATV EVO D 300C 34
MOD 500 N 59
MUX 108C 76
NEX 401 29
NEX 402 29
NEX 545 29
NEX 645 29
NEX DAB 29
OSF 001 71
PE-DES + 65
PGT 01N 79
PI-DES 65
PI DES/DIS + S 65
PMD 800 22
PMD 8000 74
PMD FF 27
PMD FF N 32
PMF FF 74
PO 064 5
KIT PO 064 6
PO 081 5
KIT PO 081 6
PTR 01N 79
RC 075 74
REP 204 64
REP 204C 63
REP 307 64
REP 408 C 63
REP 409 64
REP 612 C 63
REP 613 64
REP 815 64
RG 001 N 78
RG 004 N 78
RG 008 N 78
RG 016 N 78
RG 048 N 78
RGL 606 76
RHA 8000 17
rhombus 3
rhombus 5 3
rhombus 5 P 3
rhombus P 3
ROS 016 76
SAC 6415 N 26
SAC 7415 N 26
SAC 8000 18
SAFE E 100 75
SAB BOOK 61
SCT 8000 10
SCT-CI 8000 10
SCT-TWIN 8000 10
SCT-TWIN-CI 8000 10
SDM 6000 + 26
SDM 6000 + ST 26
SDM 7000 + 26
SDM 7000 + ST 26
SHA 6115 N 26
SHA 7115 N 26
SHA 8000 18
SIT 402 25
SIT 422 25
SM 6000 + 26
SM 6000 + ST 26
SM 7000 + 26
SM 7000 + ST 26
SM 8000 15
SM-ST 8000 15
SM -TWIN 8000 16
SM-TWIN-ST 8000 16
SM-TWIN-W-8000 16
SPS 1825 44
SPS 523 31
SPS 610 31
SPS 6100 + 26
SPS 620 31
SPS 7000 N 26
SPS 7100 + 26
SPS-LP-8000 19
SPS 8000 19
SRD 8000 13
SS BT 69
SS BT B 69
STT 8000 8
STT-CI 8000 8
STT-TWIN-CI 8000 8
SURF PRO6 35
TCT 8000 11
TCT-CI 8000 11
TCT-TWIN-CI 8000 11
TDM 6000 26
TDM 6000 ST 26
TDM 7000 26
TDM 7000 ST 26
TEDI 5000 HD 62
TTT 8000 9
TTT-CI 8000 9
TTT-TWIN-CI 8000 9
UCA 01 74
UCC 01 74
UCF 100 27
UCF 300 36
UCM 100 44
USB 800 22
USB 801 22
VNT 19 27
VNT 800 23
VNT 56 27
VNT 807 23
WBA 433 60
K
N
T
U
V
W
R
L
O
P
M S
86
TECHNICAL NOTES
TECHNICAL
NOTE
S
Fagor Electrónica, S.Coop.
San Andrés, s/n.E-20500 Mondragón (Spain)Tel.: 943 712526Fax: 943 712893E-mail: [email protected]
www.fagorelectronica.com