GCS RUGGED MODEM CASE...2017/01/17 · GCS The L3 GCS Rugged Modem Case provides a transportable...
2
GCS RUGGED MODEM CASE GCS The L3 GCS Rugged Modem Case provides a transportable enclosure for external L-Band modems and associated equipment. The case is available as either an indoor or an outdoor configuration. The Indoor case is for use in environmentally controlled shelters and comes with an IFL to interface with the VSAT. Outdoor configurations feature an Environmental Control Unit (ECU) and custom sealed external interfaces allowing the case to be positioned outside next the VSAT. The outdoor case is tested to the same rigorous standards as our 810G certified VSATs. L3 has designed a custom L-Band Distribution interface that allows precise adjustment of L-Band levels to meet ARSTRAT requirements for WGS operation. This assembly is highly modular and can be configured to accommodate multiple modems along with a rubidium high stability reference and integrated spectrum analyzer. Self-Contained External L-Band Modem Case SYSTEM FEATURES • Indoor with IFL • Outdoor with ECU • Integrated spectrum analyzer • 10/100/1000 switch • Multiple modem configurations • L3 GCS L-Band distribution • Rubidium high stability 10Mhz reference
Transcript of GCS RUGGED MODEM CASE...2017/01/17 · GCS The L3 GCS Rugged Modem Case provides a transportable...
G C S R U G G E D M O D E M C A S E
GCS
The L3 GCS Rugged Modem Case provides a transportable enclosure for external L-Band modems and associated equipment. The case is available as either an indoor or an outdoor configuration. The Indoor case is for use in environmentally controlled shelters and comes with an IFL to interface with the VSAT. Outdoor configurations feature an Environmental Control Unit (ECU) and custom sealed external interfaces allowing the case to be positioned outside next the VSAT. The outdoor case is tested to the same rigorous standards as our 810G certified VSATs.
L3 has designed a custom L-Band Distribution interface that allows precise adjustment of L-Band levels to meet ARSTRAT requirements for WGS operation. This assembly is highly modular and can be configured to accommodate multiple modems along with a rubidium high stability reference and integrated spectrum analyzer.
S e l f - C o n t a i n e d E x t e r n a l L - B a n d M o d e m C a s e
SYSTEM FEATURES
• Indoor with IFL
• Outdoor with ECU
• Integrated spectrum analyzer
• 10/100/1000 switch
• Multiple modem configurations
• L3 GCS L-Band distribution
• Rubidium high stability 10Mhz reference
GCS
G C S R U G G E D M O D E M C A S E
GCS
7640 Omnitech Place
Victor, NY 14564
Tel: 585.742.9100
Email: [email protected]
www.L3T.com/GCS
This document consists of basic marketing information that is not defined as technical data under EAR Part 772.Data contained within this document is summary in nature and subject to change at any time at L3 Technologies’ discretion.
Rev. B
MODEM INTEGR ATION OPTIONS
ViaSat EBEM, ViaSat Linkway, Comtech, MPM-1000 (other L-Band modems upon request)
POWER
Indoor Outdoor
AC 110-240VAC; 50/60Hz 110-240VAC; 50/60Hz
Consumption 300VA (Max) 500VA (Max)
IFL 100ft 25ft
MECHANICAL
# of cases 1 2
System Weight Indoor Modem Case: 80 lbs.ECU Case: 85 lbs.Outdoor Modem Case: 80 lbs.
Case Dimensions
Indoor Modem Case: 37.3 x 22.1 x 14.9 (inches)ECU Case: 31.3 x 24.2 x 17.5 (inches)Outdoor Modem Case: 37.3 x 22.1 x 14.9 (inches)
ENVIRONMENTAL
Temperature -0°C to +40°C -32°C to +50°C
CERTIFICATIONS
ARSTRAT MIL-STD-810G, ARSTRAT
S e l f - C o n t a i n e d E x t e r n a l L - B a n d M o d e m C a s e
