Finished gc2 overall sketch ideas and idea justification (1)
GC2: Carrying out maintenance
1
This is me unscrewing the lap tray of a CCT Fresnel. When testing the lights we noticed that the light didn’t work. The plug and the socket was fine so by the process of elimination it would be the bulb or something in the lamp tray. This is me looking at the bulb of a CCT Fresnel. To see the bulb you have to unscrew the lamp tray and then pull it out. I noticed that the bulb has broken so I need to replace the bulb so then the light will work.
-
Upload
joeroberts97 -
Category
Education
-
view
35 -
download
2
Transcript of GC2: Carrying out maintenance
This is me unscrewing the lap tray of a CCT Fresnel. When testing the lights we noticed that the light didn’t work. The plug and the socket was fine so by the process of elimination it would be the bulb or something in the lamp tray.
This is me looking at the bulb of a CCT Fresnel. To see the bulb you have to unscrew the lamp tray and then pull it out. I noticed that the bulb has broken so I need to replace the bulb so then the light will work.
