Gautam Buddha University - Welcome to GBU's Offical … fiber Communication Trainer kit(s) with the...
Transcript of Gautam Buddha University - Welcome to GBU's Offical … fiber Communication Trainer kit(s) with the...
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 1
Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002
UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature)
Greater Noida – 201 312 Website : www.gbu.ac.in
BID FORM
FOR THE PROCUREMENT OF OPTICAL COMMUNICATION
LABORATORY ITEMS FOR THE SCHOOL OF I.C.T. (RETENDER)
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 2
Gautam Buddha University
(Established by the Uttar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature)
Greater Noida – 201 312
Tender Procurement of Optical Communication Laboratory items for School of I.C.T. (Retender)
Opening Date 05th July 2013
Closing Date & Time 25th July 2013 upto 3.00 p.m.
Last date & Time of Bid Submission
25th July 2013 upto 5:00 p.m.
Technical Bid Opening Date, Time & Place
26th July 2013 on 12.00 Noon
Venue : Conference Room of the Registrar Office, 1st Floor, Administrative Building, G.B.U., Gr. Noida.
(Bidder/authorized representative of bidders may attend the bid opening proceedings on the above mentioned day and time).
Earnest Money Deposit
Tender Fee
2% of total quoted value (Refundable)
Rs.1050.00 (incl. of Vat and Non-refundable) Completion Period Within two months from the date of Purchase Order issued
Bid System Two Tier : 1) Technical Bid 2) Financial Bid
Technical Bid Shall Contain
i. Technical specifications of each items ii. All documents in support of commercial terms &
conditions and eligibility criteria. iii. Bidders Performa. iv. Tender Fee by way of demand drafts / pay orders
only. v. EMD by way of F.D.R./B.G. only.
Financial Bid The Financial Bid shall contain rate schedule only. The price shall be in words as well as in numeric numbers.
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 3
Gautam Buddha University (Established by the Uattar Pradesh Gautam Buddha University Act 2002
UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature)
Greater Noida – 201 312
“TECHNICAL BID (BIDDER’S PROFORMA)” (To be submitted in separate envelope)
Name of the Organization
Pl. mentioned whether a Government Company
/ Public Ltd. / Private Ltd. / Partnership /
Proprietorship
Date of incorporation/registration (pl. enclose
photocopy of cert.)
Specify the number of years in this line of
activity by the company
PAN/TIN registration No. (pl. enclose photocopy of cert.)
Service Tax, Sales Tax/VAT registration No. (pl. enclose photocopy of cert.)
Provide the postal address, telephone & fax
numbers, and email address of the nearest
service center.
Are you the manufacturer / authorized dealer / distributor/ retailer for the product quoted (please attached relevant certificate):
Mention delivery period from the date of the placement of an official purchase order
Whether technical specification are attached with Technical Bid or not.
Deviations in specifications, if yes, please
mention in separate sheet.
Turnover in the last three financial years (Figures should be in Indian Rupees in Lakhs; please attach the certified copies of balance sheet with trading, profit & loss account) : (if the figures for 12-13 are not available then they may furnish financial statement of year 09-10)
2010-11 2011-12 2012-13
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 4
Detail of the similar item(s) supplied & installed during last three years at IITs,
NIT’s or Central / State Universities or any Academic Institute of National Repute
(please enclose Performance Certificate/Purchase Order)
Name of the item(s) P.O. Value (Rs.) Name of the Institution, item
supplied.
DECLARATION
I/We hereby declare that the information given in the technical bid by the undersigned is correct
and fulfill all conditions as published in the tender document.
(SIGNATURE OF THE BIDDER)
WITH SEAL
NAME: ………………………………………………………………..
ADDRESS : ……………………………………………………………
Tel./Mobile No. : ….......................................................................................
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 5
Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002
UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature)
Greater Noida - 201312
TECHNICAL SPECIFICATIONS OF ITEMS FOR OPTICAL COMMUNICATION LAB.(Retender)
S.No Features Description Qty
1. OPTICAL FIBER TRAINER Kit Optical fiber Communication Trainer kit(s) with the following technical specifications:
Transmitter
4 Numbers of optical sources i.e. LED with two different peak
emission wavelengths at 660 nm and 950 nm ( Two at each
wavelength)
Receiver At least 4 Numbers of receivers compatible with the sources. The
receivers should be of three different types i.e. photodiode with
responsivity of at least 0.25 mA/mW, phototransistor with analog
output with responsivity at least 75 mA / mW and photo detector
with TTL output .
Modulation and
demodulation Techniques
Compatible modules of modulation and demodulation techniques
i.e. AM, PAM, PPM, PCM, Voice PCM (2 channels with telephone
handsets), IM
Multiplexing and
demultiplexing
Support 4 channels analog TDM, 8 channel digital TDM, 2 channel
FDM, Manchester coding and decoding etc.
Filters At least 4 numbers of Butterworth Low pass filters with cutoff
frequency between 3 KHz – 4 KHz range.
Function Generator Inbuilt/Separate Function Generator modules (At least 2
Numbers). Each should be able to generate frequency from (1 Hz
- 100 KHz) range in various shapes like Sin, Square, triangular etc.
At least one of them should be able to generate TTL square wave.
Voice Link Fiber optic voice link with microphone and speaker.
Fiber Optic Cable Step indexed, multimode plastic fibers each with the following
lengths
1. 10-20 cm (1 No)
05
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 6
2. 0.5 m (2 Nos) 3. 1 m (2 Nos) 4. 2-5 m (2 Nos) 5. 10-20 m (1No)
Power supply Separate/Inbuilt power supply able to generate +5 V,
12 V and GND.
P C to PC communication through RS-232.
Facility of reference Pulse Generator, Generator for white noise
Pseudo-Random Binary Sequence generator: Switch Selectable- 16 bits with Clock
32 KHz, 64 KHz and 128 KHz.
Accessories Included Interactive software, Line cord, Manuals, Headphone, Set of
patch cords, 8 LED’s optical power meter.
The kit(s) should be able to perform the following experiments:
To study the characteristics of fiber optic LED’s and detectors.
To measure the numerical aperture (NA) of the different fibers.
To measure the length of fiber cable.
Study of Manchester coding and decoding.
Forming PC to PC communication link using optical fiber link and RS- 232 interface.
Study of time division multiplexing and demultiplexing.
Study of frequency division multiplexing and demultiplexing.
Study of Pulse Amplitude Modulation and demodulation.
Study of Pulse Position Modulation and demodulation.
To form an analog and digital link.
To form a simple fiber optic voice link using microphone and speaker.
2. CONNECTOR AND SPLICING KIT:
Connector and splicing kit should be in carrying case. The kit should be able to accept any
combination of ~300µ(LT) to ~800µ(TB). The kit must contain besides other tools the following with
compatible capabilities & parameters.
ST Fiber Polishing Disc 1 No
Fiber Polishing Sheets 10 No
Fiber Polishing Pad 1 No
Continuity Tester 1 No
Fiber Glass Fiber 30 meters
Microscope 1 No
Diamond Scribe 1 No
Jacket Stripper 1 No
02
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 7
Buffer Stripper 1 No
Universal Crimp Tool 1 No
Tweezer 1 No.
Optic Prep 01 Pack
ST Connector 2 No
Epoxy 02 Packs
Ultra Splice 10 No
Instruction Manual 01 Set
3. Digital Storage Oscilloscope
Digital Storage Oscilloscope, 100 MHz bandwidth, 2 analog channels, 2 GSa/s sample rate half
channel, 1 GSa/s each channel, 20 kpts memory half channel, 10 kpts each channel, colour LCD
display with wide viewing angle.
1
4. Function Generator
20 MHz sin and square waveforms; 20 MHz Ramp, Triangle , Noise, pulse generation with variable
edge and dc waveform; sinc; exp rise and fall; 14 bit, 50 Msa/s, 64 Kpoint arbitrary waveforms; AM,
FM,PM,FSK and PWM modulation, Linear and logarithmic sweeps and burst all standards; USB, GPIB
and LAN interfacing.
1
5. DC Power Supply
Triple output variable power supply with the following parameters:
Voltage and Current ranges: 0-6 V/5A, 0-+25V/1A &0-(-25V)/1A
Power Range: 80W-200W
Programmable through GPIB and RS232 Interface.
Support of parallel and series connection of multiple supplies to achieve required output current and
voltage respectively.
1
6.
Software for Optical Communication System
Support of a rich library comprising simulation for electronic components like diode ,
transistor, MOSFET etc., optical and optoelectronic components like various LED’s, Lasers
(e.g. CW, Fabry Perot lasers etc), Transmitter, receiver, advanced amplifiers (e.g. SOA, EDFA,
Multipump Raman, hybrid amplifiers, EYCDA etc), advanced modulation formats (e.g.
D(Q)PSK, duobinary, OFDM etc), optical interconnects, fibre bragg grating, FEC, advanced
analog and digital input generators, filters, polarization, switches/ cross connects, Local
oscillator, Splitter combiner models, Time delays, interferometers, High speed bit
generators up to 100Gbps, latest fibres (e.g. single mode & multimode glass optical fibres,
erbium doped fibres, plastic optical fibre and polarization maintained fibres etc.)
Support to design various optical networks and systems like Local Area Network, Storage
Area Network, Metropolitan area network, ultra long haul networks, next generation optical
networks up to 100Gbps, SONET/SDH ring networks, submarine systems, passive optical
5
use
rs
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 8
networks, Ethernet Passive Optical Network, BPON, GPON, WDM, CWDM,DWDM, all
optical network, OTDM, OCDMA, Free space optics, fiber optic CATV system design, Fiber to
the home, Radio over fibre, Fiber to the Premises, Fiber to the x, digital/analog systems,
Soliton networks etc.
Capability to do transmission impairment analysis and assessment of fibre nonlinearities
which includes stimulated Brillouin scattering, stimulated Raman scattering, four wave
mixing, self-phase modulation, cross-phase modulation intermodulation and all types of
dispersion.
Capable of evaluating the performance in terms of Q value, BER, power spectra, amplitude,
OSNR, eye diagram, eye opening/closing, jitter, polarization state, gain, dispersion,
constellation diagram, chirp etc. Support of results display in 2D and 3D graphics as well
with various formats like contour plots, slice plots etc.
GUI should support organization of several objects en bloc.
Support of time domain and frequency domain split step methods, and Monte-Carlo
simulation to evaluate system sensitivity.
Support of interfacing with C/C++ and Matlab.
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 9
Gautam Buddha University (Established by the Uattar Pradesh Gautam Buddha University Act 2002
UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature)
Greater Noida – 201 312
GENERAL TERMS AND CONDITIONS
1. Detailed information about the items and their specifications are available in tender
document, which can be downloaded from the University website www.gbu.ac.in.
2. Two bids system of tender will be adopted.
(i) The bid containing technical specifications, EMD, Tender Fee and eligibility documents.
(ii) Bid containing financial offer.
Technical and financial bids should be submitted in separate covers. These two
envelops shall be sealed in a common cover and addressed to The Registrar, Gautam
Buddha University, Greater Noida, Gautam Budh Nagar -201310 (U.P.)
superscribing “Tender against Notification Advt. GBU/S&P/19/2013, Name of
supply: Laboratory Equipments of Optical Communication for School of ICT” so as
to reach us on or before last date of bid submission.
3. The Technical Bid and Financial Bid should be duly filled-up.
4. These bids will be opened in two stages. The bid containing technical specifications, EMD,
TF and eligibility documents will be opened at first stage and if same is found according
to required specifications, the bid containing financial offer shall be opened in second
stage.
5. The “Technical Bid” shall contain all documents in suppor t of quoted
item, their specifications, EMD, Tender Fee, terms & conditions and eligibility criteria
along with the page number for cited specifications in the company brochure for the
particular item.
6. The “Financial Bid” shall contain price schedule only. The rates and units shall not be
overwritten in the price schedule. The price shall be both in words and figures.
7. Eligibility Criteria: All the participating suppliers/firms or principal manufacturer-
should meet the following qualifying criteria. The firm should be a registered supplier for
such supplies. Following documents are required to be submitted with Technical Bid, to
qualify eligibility criteria:
(g) PAN/TIN registration certificate (self attested). (h) Service Tax/Sales Tax/VAT registration certificate (self attested). (i) Earnest Money Deposit (EMD) in form of FDR/B.G. Only in favour of “Gautam
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 10
Buddha University” alongwith the Technical Bid. (j) Tender Fee in form of DD/Pay Order in favour of “Gautam Buddha
University” alongwith the Technical Bid. (k) Audited copy of balance sheet with trading, profit & loss account for the last
three financial years should be submitted (self attested). (l) The firm/company should have experience of supplying & installation for
similar Equipments/Instruments to institutes of National repute. The company should also furnish a list of clients of last 3 years.
(m) The bidder must be either sole Manufacturer of the Equipments/Instruments or the authorized agent/representative of the OEM. In the case of agent/representative, certified copy of the agency/authorization issued by the OEM should be enclosed with the tender.
(n) Authorized signatory should sign on all pages. Bids without authorized signature will be rejected.
8. Offer should be sent in a sealed envelope, submitted either in person or by post on which name and address of the supplier/firm shall be written. Tenders received through E- mails or FAX will not be considered.
9. The technical bids will be opened on scheduled date and time. Bidders/authorized representatives of the bidders intending to attend the tender opening should intimate in advance.
10. The rate quoted should be F.O.R. Gautam Buddha University (Gautam Budh Nagar, Greater Noida, UP) in rupees/foreign currency inclusive of all charges e.g. packing, forwarding local taxes, railway freight, transit insurance etc. The total price should include all accessories required for final installation of the item. Rates of imported goods should be quoted excluding custom duty, as this University is exempted from payment of custom duty (by letter of Department of Scientific and Industrial Research, Ministry of Science & Technology, GOI).
11. The items should have USEPA/International/National validation certificates, wherever applicable.
12. The cost of the tender is Rs.1050/- (Rupees One Thousand & Fifty Only) inclusive of taxes (Non-refundable) and it shall be paid separately in the form of DD/Pay Order drawn in favour of “Gautam Buddha University” payable at “Delhi” and should be attached with technical bid envelope.
13. The EMD of the successful bidder will be refunded after getting the “Performance Security Deposit (i.e. 10% of PO/WO value)”. The Performance Security Deposit shall be deposited in the form of FDR/Bank Guaranty, pledged in favour of “Gautam Buddha University” and will be returned after expiry of the warranty period. The EMD of the unsuccessful bidders will be returned to the firm(s) immediately after finalization of the tenders. No interest will be paid on EMD in any case.
14. The required delivery period must be mentioned against each item. Tenders should preferably be given only for those equipments/items/articles, which are available ex- stock.
15. Detailed specifications with the mention of make and model/Version of each item should be clearly given supported by the illustrated pamphlets wherever possible. Quotations without specified make and Model/Version and other particulars may be rejected. The accessories included in the Equipments/Instruments should also be clearly mentioned.
16. Losses or damage in transit will be borne by the Supplier. The supplier may, if he so desires, get the goods insured and include such charges in the tendered rate.
17. Offered prices should be valid for at least 180 days from the last date of receipt of tenders.
18. All legal proceedings, if necessity arises to the University may be any of the parties (University or Contractor/Supplier) shall have to be lodged in the courts situated at Gautam Buddha Nagar and not elsewhere.
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 11
19. (a) The items delivery time should be preferably within 8 weeks after the date of
issuance of the purchase order. If the delivery time is quoted more than that, GBU
reserves all rights to permit the bidder to compete.
(b) The Penalty Clause is as under:-
Should the bidder fail to deliver the goods within stipulated period , the Competent
Authority may, at his discretion, allow an extension in time subject to recovery from
the bidder as agreed liquidated damages, and not by way of penalty, a sum equal
to the percentage of the value of tender amount which the bidder has failed to
supply for period of delay as stated below:-
i.Delay up to one week 1%
ii.Delay exceeding one week but not 2%
exceeding two weeks
iii.Delay exceeding two weeks but 5%
not exceeding one month
iv.Delay exceeding one month 5% for each month and part there of subject to
maximum 10%
(c) In case of failure to supply the goods within stipulated delivery period and in accordance with the specifications given in the quotations, the University shall be free to cancel the order.
20. Supply of the placed order in part will not be accepted.
21. The University’s term for payment: 90% against delivery of items in good condition,
installation and putting those in satisfactory working conditions; balanced 10%
payment shall be released after 60 days of satisfactory working of the items. No
advance payment shall be released.
22. No revision of price bid will be allowed once the price bids are opened. In case
firm/company quoted in foreign currency the price will be converted into Indian
Rupee at the conversion rate on the basis of the last day of the bid submission.
23. No increase in price will be allowed after our purchase order(s) are placed.
24. Warranty certificate against all the Itms/Equipments/Instruments developed defects
covering warranty period, which commences from the date of installation shall be
given at the time of supply of the items.
25. Inspection certificates of the items inspected by the qualified engineer of the
manufacturer and packed in accordance with the terms and conditions of this order
must be enclosed.
26. During the warranty period whenever the firm is called upon to attend to
the rectification of the defects/faults in the consignments, the firm shall attend to the
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 12
repair work within a period of a week. They should render timely back up service
whenever called upon. A certificate to the effect should be attached to the tender.
27. A certificate to the effect that items supplied is fully operational and n o
addit ional accessory or space is requi red to ful ly functioning the
Equipments/Instruments should be issued along with the delivery challans/invoice.
GBU reserves the right to refuse payment in the event of not furnishing this
certificate at the time of supply.
28. Complete user, technical and service manuals/installation drawings/documentation
and spare parts catalogue are to be provided along with the supply of the item.
29. Failure to comply with all the terms and conditions mentioned herein would result in the tender being summarily rejected.
30. Vendors are informed that once the firms are shortlisted based on the eligibility criteria and technical specifications, only then the financial bids of the firms meeting eligibility criteria, technical specifications / requirements would be opened.
31. Conditional tenders will not be accepted. 32. Any cutting and overwriting in the financial bid will not be accepted. 33. GBU reserves the right to change the order quantity or split the orders among multiple
vendors without assigning any reason (s) whatsoever. 34. GBU reserves the right to reject any or all the tenders without assigning any reasons
whatsoever.
Registrar
Gautam Buddha University
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 13
Gautam Buddha University (Established by the Uattar Pradesh Gautam Buddha University Act 2002
UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature)
Greater Noida – 201 312
ACCEPTANCE
We accept the above terms and conditions and shall comply with them strictly.
(SIGNATURE OF THE BIDDER) WITH SEAL
NAME : ………………………………………………………
ADDRESS : ………………………….…………………..…
: ………………………….…………………..…
: ………………………….…………………..…
Tel./Mobile No. : ………………………..…………
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 15
Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002
UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida – 201 312
FINANCIAL BID FOR OPTICAL COMMUNICATION LAB OF SOICT (Retender)
S.No Features Description Qty Unit Price Tax Amt. Gr. Total
1. OPTICAL FIBER TRAINER Kit Optical fiber Communication Trainer kit(s) with the following technical specifications:
Transmitter
4 Numbers of optical sources i.e. LED with two different peak
emission wavelengths at 660 nm and 950 nm ( Two at each
wavelength)
Receiver At least 4 Numbers of receivers compatible with the sources. The
receivers should be of three different types i.e. photodiode with
responsivity of at least 0.25 mA/mW, phototransistor with analog
output with responsivity at least 75 mA / mW and photo detector
with TTL output .
Modulation and
demodulation Techniques
Compatible modules of modulation and demodulation techniques
i.e. AM, PAM, PPM, PCM, Voice PCM (2 channels with telephone
handsets), IM
Multiplexing and Support 4 channels analog TDM, 8 channel digital TDM, 2 channel
05
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 16
demultiplexing FDM, Manchester coding and decoding etc.
Filters At least 4 numbers of Butterworth Low pass filters with cutoff
frequency between 3 KHz – 4 KHz range.
Function Generator Inbuilt/Separate Function Generator modules (At least 2
Numbers). Each should be able to generate frequency from (1 Hz
- 100 KHz) range in various shapes like Sin, Square, triangular etc.
At least one of them should be able to generate TTL square wave.
Voice Link Fiber optic voice link with microphone and speaker.
Fiber Optic Cable Step indexed, multimode plastic fibers each with the following
lengths
6. 10-20 cm (1 No) 7. 0.5 m (2 Nos) 8. 1 m (2 Nos) 9. 2-5 m (2 Nos) 10. 10-20 m (1No)
Power supply Separate/Inbuilt power supply able to generate +5 V,
12 V and GND.
P C to PC communication through RS-232.
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 17
Facility of reference Pulse Generator, Generator for white noise
Pseudo-Random Binary Sequence generator: Switch Selectable- 16 bits with Clock
32 KHz, 64 KHz and 128 KHz.
Accessories Included Interactive software, Line cord, Manuals, Headphone, Set of
patch cords, 8 LED’s optical power meter.
The kit(s) should be able to perform the following experiments:
To study the characteristics of fiber optic LED’s and detectors.
To measure the numerical aperture (NA) of the different fibers.
To measure the length of fiber cable.
Study of Manchester coding and decoding.
Forming PC to PC communication link using optical fiber link and RS- 232 interface.
Study of time division multiplexing and demultiplexing.
Study of frequency division multiplexing and demultiplexing.
Study of Pulse Amplitude Modulation and demodulation.
Study of Pulse Position Modulation and demodulation.
To form an analog and digital link.
To form a simple fiber optic voice link using microphone and speaker.
2. CONNECTOR AND SPLICING KIT:
Connector and splicing kit should be in carrying case. The kit should be able to accept any
combination of ~300µ(LT) to ~800µ(TB). The kit must contain besides other tools the following with
compatible capabilities & parameters.
ST Fiber Polishing Disc 1 No
Fiber Polishing Sheets 10 No
02
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 18
Fiber Polishing Pad 1 No
Continuity Tester 1 No
Fiber Glass Fiber 30 meters
Microscope 1 No
Diamond Scribe 1 No
Jacket Stripper 1 No
Buffer Stripper 1 No
Universal Crimp Tool 1 No
Tweezer 1 No.
Optic Prep 01 Pack
ST Connector 2 No
Epoxy 02 Packs
Ultra Splice 10 No
Instruction Manual 01 Set
3. Digital Storage Oscilloscope
Digital Storage Oscilloscope, 100 MHz bandwidth, 2 analog channels, 2 GSa/s sample rate half
channel, 1 GSa/s each channel, 20 kpts memory half channel, 10 kpts each channel, colour LCD
display with wide viewing angle.
1
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 19
4. Function Generator
20 MHz sin and square waveforms; 20 MHz Ramp, Triangle , Noise, pulse generation with variable
edge and dc waveform; sinc; exp rise and fall; 14 bit, 50 Msa/s, 64 Kpoint arbitrary waveforms; AM,
FM,PM,FSK and PWM modulation, Linear and logarithmic sweeps and burst all standards; USB, GPIB
and LAN interfacing.
1
5. DC Power Supply
Triple output variable power supply with the following parameters:
Voltage and Current ranges: 0-6 V/5A, 0-+25V/1A &0-(-25V)/1A
Power Range: 80W-200W
Programmable through GPIB and RS232 Interface.
Support of parallel and series connection of multiple supplies to achieve required output current and
voltage respectively.
1
6.
Software for Optical Communication System
Support of a rich library comprising simulation for electronic components like diode ,
transistor, MOSFET etc., optical and optoelectronic components like various LED’s, Lasers
(e.g. CW, Fabry Perot lasers etc), Transmitter, receiver, advanced amplifiers (e.g. SOA, EDFA,
Multipump Raman, hybrid amplifiers, EYCDA etc), advanced modulation formats (e.g.
D(Q)PSK, duobinary, OFDM etc), optical interconnects, fibre bragg grating, FEC, advanced
analog and digital input generators, filters, polarization, switches/ cross connects, Local
oscillator, Splitter combiner models, Time delays, interferometers, High speed bit generators
up to 100Gbps, latest fibres (e.g. single mode & multimode glass optical fibres, erbium
doped fibres, plastic optical fibre and polarization maintained fibres etc.)
Support to design various optical networks and systems like Local Area Network, Storage
Area Network, Metropolitan area network, ultra long haul networks, next generation optical
5
user
s
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 20
networks up to 100Gbps, SONET/SDH ring networks, submarine systems, passive optical
networks, Ethernet Passive Optical Network, BPON, GPON, WDM, CWDM,DWDM, all optical
network, OTDM, OCDMA, Free space optics, fiber optic CATV system design, Fiber to the
home, Radio over fibre, Fiber to the Premises, Fiber to the x, digital/analog systems, Soliton
networks etc.
Capability to do transmission impairment analysis and assessment of fibre nonlinearities
which includes stimulated Brillouin scattering, stimulated Raman scattering, four wave
mixing, self-phase modulation, cross-phase modulation intermodulation and all types of
dispersion.
Capable of evaluating the performance in terms of Q value, BER, power spectra, amplitude,
OSNR, eye diagram, eye opening/closing, jitter, polarization state, gain, dispersion,
constellation diagram, chirp etc. Support of results display in 2D and 3D graphics as well with
various formats like contour plots, slice plots etc.
GUI should support organization of several objects en bloc.
Support of time domain and frequency domain split step methods, and Monte-Carlo
simulation to evaluate system sensitivity.
Support of interfacing with C/C++ and Matlab.
Warranty : (pl. mention the warranty period of each quoted item)
Total cost of the offer is Rs._______________ in words (Rupees ______________________________________________________________________________.
I abide by all the terms & conditions of the tender.
(SIGNATURE OF THE BIDDER)
WITH SEAL NAME : ………………………………………………………
Tender Bid : Optical Communication Lab Items_SoICT (Retender) Page 21
Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002
UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida – 201 312
ACCEPTANCE
I/We accept the above terms and conditions and shall comply with them strictly.
DECLARATION
1. The rates quoted are inclusive of all taxes and F.O.R University Stores. 2. The information given in the financial bid by the undersigned is correct.
(SIGNATURE OF THE BIDDER) WITH SEAL
NAME : ………………………………………………………
ADDRESS : ………………………….…………………..…
: ………………………….…………………..…
: ………………………….…………………..…
Tel./Mobile No. : ………………………..………