Gas taps for gas cookers and hobs - MONDRAGON … +82-31-222-2524 e-mail: [email protected] E...
Transcript of Gas taps for gas cookers and hobs - MONDRAGON … +82-31-222-2524 e-mail: [email protected] E...
C O M P O N E N T E S PA R A E L E C T R O D O M É S T I C O S / D O M E S T I C A P P L I A N C E C O M P O N E N T S
COCCIÓNCOOKING
LAVADOWASHING
CALENTAMIENTO DE AIREAIR HEATING
SERIES CAM-17500, CAM-17501, CAM-20800, CAM-21800, ACAL-10200 y CAM-3200Grifos para cocinas y encimeras a gas
CAM-17500, CAM-17501, CAM-20800, CAM-21800, ACAL-10200 and CAM-3200 SERIESGas taps for gas cookers and hobs
SALES OFFICES:FranceUlarco France, s.a.r.l.94643 Rungis CedexTel: +33 (0) 1 41 73 01 12Fax: +33 (0) 1 45 60 55 30E-mail: [email protected]
GermanyCopreci Industriekonponenten GmbHNördliche Ringstrasse 100/2D-73033 GöppingenTel: +49 (0) 7161 928412Fax: +49 (0) 7161 928426E-mail: [email protected]
ItalyCopreci Italia, s.r.l.20060 Cassina de Pecchi (MI)TeL: +39 02 953 041 18Fax: +39 02 953 012 98e-mail: [email protected]
United KingdomCopreci UK, LTDWest Midlands DY5 1XPTel: +44 (0) 1 384 70 890Fax: +44 (0) 1 384 783 52E-mail: [email protected]
PRODUCTION PLANTS:Copreci Mexico SA de CVCalle Uno Nº 736 Z.I.44940 Guadalajara (Jalisco)MexicoTel: +52 33 3 145 19 63Fax: +52 33 3 145 10 56E-mail: [email protected]
Zerco, s.r.o.Komenského 27479368 Dvorce u BruntáluCzech RepublicTel: +420 646 74 54 92Fax: +420 646 74 54 95E-mail: [email protected]
KoreaApelco (Korea) Co.Ltd.Rm 407 Kisan B/D Probank 1034-2Ingae-Dong Paldal-GuSuwon-City Kyungki-Do. KoreaTel.: +82-31-222-2525Fax: +82-31-222-2524e-mail: [email protected]
ER-0015/1/91
EmpresaRegistrada
AENOR
GestiónAmbientalCGM-00/030
AENOR
ISO 9001
CE
R T I F I E
D
QU
A
L I T Y S Y S T
EM
H
H
HHH
HH H H H
HHH
H
ISO 14001
USAMondragon Components USA, Co1341 Canton Road, Suite H3(75 Canton Office Park) Marietta, GA, 30066Tel.: +1 (770) 428-4456Fax: +1 (770) 428-4595e-mail: [email protected]
Copreci Systems, s.r.l.Via G. Galilei, 1231010-MARENO DI PIAVE (TV) - ITALIATel: +39 0438492531Fax: +39 0438492559E-mail:[email protected]
Via dei Mercanti 6, Zona Comm.47100 FORLI-ITALIATel: +39 0543796770Fax: +39 0543796771E-mail:[email protected]
Copreci Valencia, S.A.Lepanto, 646930 Quart de Poblet (Valencia)Tel: +34 96 153 61 65Fax: +34 96 153 61 66E-mail: [email protected]
Copreci do BrasilAv. Eurico Ambrogi Santos, 2100Distrito Industrial PiracangaguaCEP: 12010-970 - Taubate - SP - BRASILTel: +55 12 286 1573Fax: +55 12 286 1573E-mail: [email protected]
HEADQUARTERS:Copreci, S. Coop.Avda. de Alava, 3E- 20550 AretxabaletaSpainTel: + 34 943 71 94 99Fax: + 34 943 79 23 49E-mail: [email protected]
Filiale:
Estos grifos ofrecen una variada gama de posibilidades, capacesde dar respuesta a las múltiples necesidades que presenta el sectorde los fabricantes de cocinas y encimeras domésticas a gas.
Nuestros grifos están diseñados para ser montados en cocinas yencimeras a gas, para gobernar un amplio espectro de quemadoresde superficie y horno, y para todo tipo de gases.
La Serie CAM 17500 está diseñada para su uso en cocinas yencimeras a gas con rampa circular y disposición de mandoshorizontal.
La Serie CAM 17501 está diseñada para su uso en encimeras agas con rampa circular y disposición de mandos vertical.
La Serie CAM 21800 está diseñada para su uso en cocinas conrampa tipo "flange".
Los Grifos de las Series ACAL 10200 y CAM 3200 deben sermontados sin grupo magnético y son indicados para aplicacionesde horno-grill sin seguridad termoeléctrica de gran caudal y cocinasindustriales.
Los Grifos de la Serie CAM 20800 y 20900 están diseñados parael mercado Norteamericano, para ser montados en cocinas yencimeras, desarrollados para gobernar el flujo de gas tanto aquemadores sellados, como a los de tipo "venturi". Son ademásapropiados tanto para configuraciones de salida a 90º, como parasalida en línea.
These taps offer the most complete range of possibilities capableof responding to the many requirements of the domestic gascooker and hob manufacturers.
Our gas taps are designed to be fitted in cookers and hobs tocontrol a wide range of surface burners and ovens, and for alltype of gas.
CAM 17500 Series is designed to be fitted in cookers and hobswith circular rail and horizontal knobs available.
CAM 17501 Series is designed to be fitted in gas hobs with circularrail and vertical knobs available.
CAM 21800 Series is designed to be fitted in cookers with "flange"rail type.
Series ACAL 10200 and CAM 3200 taps are designed to be fittedwithout magnet unit, and they are specially indicated for ovenand grill of large flow rate without thermoelectric safety deviceand for industrial cookers.
CAM 20800 and 20900 Series are designed for the North Americanmarket to be fitted in gas and hobs cookers. They are developedto control the gas flow to sealed or non-sealed top burners. Theycan also be used in perpendicular or parallel outlet configurations.
Características funcionales generalesGeneral functional characteristics
Temperatura ambiente máximaPresión máxima del gasBy-pass regulable para cada tipo de gas.
150ºC65 mB
Mechanical bodyMale coneCoverSpindle
Maximum ambient temperatureMaximum gas pressureAdjustable by-pass for each type of gas.
150º65 mB
Características constructivasConstruction characteristics
Cuerpo mecánicoCono machoTapaPerno
Latón estampadoLatón de barra
Aluminio inyectadoLatón
Drop-forged brassBar-cut brass
Injected aluminiumBrass
Descripción generalGeneral description
Grifos para cocinas y encimeras a gasGas taps for gas cookers and hobs
Funciones adicionalesAdditional functions
Encendido por switches de pulsado o giro, según modelos. Ignition by switches that are pressed or turned, depending onthe model.
Características de acoplamientoConnection characteristics
Tipos de entrada :• Rampa redonda de diámetro 14, 16, 17, 18, 19 y 21 mm. (Consultar según modelos ). Serie CAM 21800 rampa tipo flange.• Bajo demanda y estudio , otros tipos y dimensiones.
Tipos de salida: según especificaciones del clienteDimensiones del perno: según las especificaciones del cliente.
Separación entre agujeros de la brida: 21, 22, 23, 27, y 30mm. Otros tipos y dimensiones bajo demanda y estudio.
Inlet types :• Round 14, 16, 17, 18, 19 and 21mm diameter ramp (Consult depending on the model ). CAM 21800 Series "flange" rail type.• On request and after a study , other types and dimensions.
Outlet types: according to customer specifications.Spindle dimensions: according to customer specifications.
Distance between clamp holes: 21, 22, 23 , 27 and 30 mm ,depending on the model. Other types and dimensions on requestand after a study.
InstalaciónInstallation
Para garantizar un correcto funcionamiento de la instalación , serecomienda respetar los siguientes pares de apriete :
• Los tornillos de la brida• El grifo al tubo colector de gas• Las tuercas de la salida de gas
max. 0,3 mKp.max. 1 mKp.max. 1,5 mKp.
To ensure that the installation works properly, it is recommendedthat the following tightening torques be respected :
• Clamp screws• Tap to gas manifold pipe• Gas outlet nuts
max. 0.3 mKp.max. 1 mKp.max. 1.5 mKp.
Serie CAM 20800 y 20900:- El par del tornillo de amarre del grifo al colector no
debe superar 30 Kg cm (25 Ib in).- El par de la tuerca para atar el tubo de conexión al
quemador no debe superar 50 Kg cm (42 lb in).
CAM 20800 y 20900 Series:- Maximum torque to attach the gas valve to the
manifold 30 kg cm (25 lb in).- Maximum torque to attach the tubing to the outlet
50 kg cm (42 lb in).
Diagramas de giroRotation diagrams
Salvo indicaciones expresas, los diagramas de giropara las diferentes versiones de regulación normaly regulación progresiva son:
Regulación NormalNormal regulation
Regulación ProgresivaProgressive regulation
Unless expressly indicated, the rotation diagramsfor the different normal regulation and progressiveregulation versions are as follows:
Normas y homologacionesStandards and approvals
Los grifos sin seguridad termoeléctrica de Copreci se fabricanrespetando las normativas europeas EN-126 , EN-161 y estánhomologados CE y en AGA las series 20800 y 20900.
Otras homologaciones , según demanda del cliente.
Copreci's gas taps are manufactured to the following Europeanstandards EN-126 , EN-161 and are CE approved and the AmericanAGA for 20800 and 20900 Series.
Other approvals , as requested by the customer.
ComplementosAccessories
Copreci ofrece al cliente la posibilidad de suministro de toda unagama de complementos:
• Switches• Catenarias• Etc.....
Consultar los modelos disponibles en la sección de complementos.
Copreci offers its customers a full range of accessories:
• Switches• Catenaries• Etc.....
Consult the models available in the accessories section..
AccesoriosFittings
Copreci ofrece al cliente la posibilidad de suministro de toda una gamade accesorios: inyectores, juntas, biconos, bridas, tornillos, tuercas , etc.
Consultar la sección de accesorios .
Copreci offers its customers a full range of fittings : injectors, seals,olives, clamp, screws, nuts, etc .
Consult the fittings section.
CAM
-175
00
Serie / Series
Serie / Series
CAM-17500
Grifo estándarStandard tap
1
Cotas más importantesMain outside dimensions
Ø RAMPA /GAS RAIL Ø
A (mm.)
2328,528
28, 5283030302723
28,5
(*) Solo posible con agujeros brida M4 / Only available with M4 clamp holes.(1) Altura eje perno al centro rampa / Height from the spindle's axis to the gasrail center.
ALTURA /HEIGHT (1)
C (mm.)
16
18
2122
14
DISTANCIA ENTRE AGUJEROS BRIDA /DISTANCE BETWEEN CLAMP HOLES
21*27 - 30 - 23*- 21*
27 - 30
30
30273021*27
B (mm.)
COCINA /COOKER
ENCIMERA /HOB
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
PULSADO / PUSHING (mm)
02,52,9
CAUDAL / FLOW (1)
Con regulación / with regulationSin regulación / without regulation
250300
Serie / Series
CAM-17500 2
Cotas más importantesMain outside dimensions
Grifo con pulsado extra-corsaExtra-large pushing tap
Ø RAMPA /GAS RAIL Ø
A (mm.)
2328,528
28, 5283030302723
28,5
(*) Solo posible con agujeros brida M4 / Only available with M4 clamp holes.(1) Altura eje perno al centro rampa / Height from the spindle's axis to the gasrail center.
ALTURA /HEIGHT (1)
C (mm.)
16
18
2122
14
DISTANCIA ENTRE AGUJEROS BRIDA /DISTANCE BETWEEN CLAMP HOLES
21*27 - 30 - 23*- 21*
27 - 30
30
30273021*27
B (mm.)
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
PULSADO / PUSHING (mm)
4
CAUDAL / FLOW (1)
Con regulación / with regulationSin regulación / without regulation
250300
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
COCINA /COOKER
ENCIMERA /HOB
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
Serie / Series
CAM-17500Serie / Series
CAM-17500
Grifo tapa aluminioAluminium cover tap
3 4Grifo con entrada a roscaThreaded inlet tap
Cotas más importantesMain outside dimensions
Cotas más importantesMain outside dimensions
A (mm.)
2221232323
A = Métrica rosca entrada / Threadad inlet.
B = Distancia del perno a la salida / Spindle axis distance to the outlet.
B (mm.)
1/8" x 28 BSPT
1/8" x 28 BSP1/8"- 27 NPT
Ø RAMPA /GAS RAIL Ø
A (mm.)
2328,528
28, 5283030302723
28,5
(*) Solo posible con agujeros brida M4 / Only available with M4 clamp holes.(1) Altura eje perno al centro rampa / Height from the spindle's axis to the gasrail center.
ALTURA /HEIGHT (1)
C (mm.)
16
18
2122
14
DISTANCIA ENTRE AGUJEROS BRIDA /DISTANCE BETWEEN CLAMP HOLES
21*27 - 30 - 23*- 21*
27 - 30
30
30273021*27
B (mm.)
PULSADO / PUSHING (mm)
02,52,9
PULSADO / PUSHING (mm)
2,5
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
Con regulación / with regulationSin regulación / without regulation
250300
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
Con regulación / with regulationSin regulación / without regulation
250300
COCINA /COOKER
ENCIMERA /HOB
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
COCINA /COOKER
ENCIMERA /HOB
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
CAM
-175
01
Serie / Series
Standard hob tap with "extra-large" pushing
Serie / Series
CAM-17501
Grifo encimera con pulsado "extracorsa"
Cotas más importantesMain outside dimensions
2
Ø RAMPA /GAS RAIL Ø
A (mm.)
2328,5
(1) Altura eje perno al centro rampa / Height from the spindle's axis to the gasrail center.
ALTURA /HEIGHT (1)
C (mm.)
16
DISTANCIA ENTRE AGUJEROS BRIDA /DISTANCE BETWEEN CLAMP HOLES
21- 23
B (mm.)
PULSADO / PUSHING (mm)
4(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
Con regulación / with regulationSin regulación / without regulation
250300
Serie / Series
CAM-17501 1
Cotas más importantesMain outside dimensions
Grifo encimera estándarStandard hob tap
PULSADO / PUSHING (mm)
2,52,9
Ø RAMPA /GAS RAIL Ø
A (mm.)
2328,5
(1) Altura eje perno al centro rampa / Height from the spindle's axis to the gasrail center.
ALTURA /HEIGHT (1)
C (mm.)
16
DISTANCIA ENTRE AGUJEROS BRIDA /DISTANCE BETWEEN CLAMP HOLES
21- 23
B (mm.)
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
Con regulación / with regulationSin regulación / without regulation
250300
COCINA /COOKER
ENCIMERA /HOB
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
COCINA /COOKER
ENCIMERA /HOB
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
Serie / Series
CAM-17501Serie / Series
CAM-17501
Grifo encimera rampa 8 mm.8 mm. gas rail hob tap
Cotas más importantesMain outside dimensions
Cotas más importantesMain outside dimensions
3 4Aluminium cover hob tapGrifo encimera tapa aluminio
Tamaño reducido / Reduced size
PULSADO / PUSHING (mm)
2,52,9
Ø RAMPA /GAS RAIL Ø
A (mm.)
2328,5
(1) Altura eje perno al centro rampa / Height from the spindle's axis to the gasrail center.
ALTURA /HEIGHT (1)
C (mm.)
16
DISTANCIA ENTRE AGUJEROS BRIDA /DISTANCE BETWEEN CLAMP HOLES
21- 23
B (mm.)
PULSADO / PUSHING (mm)
2,5
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
Con regulación / with regulationSin regulación / without regulation
250300
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
Con regulación / with regulationSin regulación / without regulation
250300
COCINA /COOKER
ENCIMERA /HOB
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
COCINA /COOKER
ENCIMERA /HOB
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
CAM
-209
00
Serie / Series
CAM
-208
00
Serie / Series
CAM-20800
Cotas más importantesMain outside dimensions
1Grifo rampa cuadrada salida en líneaSquare rail tap with straight outlet
Serie / Series
CAM-20800
Grifo salida a 90º90º outlet tap
2
Cotas más importantesMain outside dimensions
COCINA /COOKER
ENCIMERA /HOB
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
COCINA /COOKER
ENCIMERA /HOB
PULSADO / PUSHING (mm)
2 0,5
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
Sin regulación / without regulation 300
+-
PULSADO / PUSHING (mm)
2 0,5
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
Sin regulación / without regulation 300
+-
Serie / Series
CAM-20900 3Tamaño reducido / Reduced size
Grifo "Mini" salida en línea"Mini" tap with straight outlet
Cotas más importantesMain outside dimensions
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
COCINA /COOKER
ENCIMERA /HOB
CAM
-218
00
Serie / Series
PULSADO / PUSHING (mm)
2 0,5
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
Sin regulación / without regulation 300
+-
Serie / Series
CAM-21800Serie / Series
CAM-21800
Grifo tipo flange estándar"Flange" standard tap
Cotas más importantesMain outside dimensions
Cotas más importantesMain outside dimensions
1 2Grifo tipo flange salida inclinadaSloping outlet "flange" tap
PULSADO / PUSHING (mm)
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
200
02,2
PULSADO / PUSHING (mm)
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
200
02,2
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
COCINA /COOKER
ENCIMERA /HOB
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
COCINA /COOKER
ENCIMERA /HOB
CAM
-320
0
Serie / Series
ACA
L-10
200
Serie / Series
ACAL-10200Serie / Series
CAM-3200
Grifo cocina horno y grillCooker oven and grill tap
Cotas más importantesMain outside dimensions
Cotas más importantesMain outside dimensions
1 2Grifo para cocina industrialIndustrial cooker tap
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.
(1) Flow in L/hour air with 1 mB pressure drop.
CAUDAL / FLOW (1)
161821
(1) Altura eje perno al centro rampa / Height from the spindle'saxis to the gas rail center.
Ø RAMPA /GAS RAIL Ø
A (mm.)
DISTANCIA ENTRE AGUJEROS BRIDA /DISTANCE BETWEEN CLAMP HOLES
30
B (mm.)
PULSADO / PUSHING (mm)
2,8
CAUDAL / FLOW (1)PULSADO / PUSHING (mm)
2,8325 500
HORNO GRILL/GRILL OVEN
HORNO /OVEN
BARBACOA /BARBECUE
COCINA /COOKER
ENCIMERA /HOB
BARBACOA /BARBECUE
ENCIMERA /HOB
COCINA /COOKER
HORNO /OVEN
HORNO GRILL/GRILL OVEN
(1) Caudal en L/hora aire con 1 mB de pérdida de carga.
(1) Flow in L/hour air with 1 mB pressure drop.