APPLICATIONS

▲▲ Petrochemical plants

▲▲ Offshore platforms

▲▲ Pipeline compressor stations

▲▲ Refineries

▲▲ Turbine enclosures

▲▲ Transport loading racks

▲▲ Petrochemicals

▲▲ Chemicals

▲▲ Automotive paint spray

▲▲ Munitions

▲▲ Hangars

▲▲ Semiconductor

▲▲ Industrial process

▲▲ Hydrogen storage

FEATURES

▲▲ Third-dimension accounts for the Z-axis

▲▲ Advanced software

▲▲ Full-service solution

▲▲ Statistical analysis

▲▲ Quantitative data and reports

▲▲ Answers established method and safety requirements (HSE, ISA 84, ANSI, IEC 61508, LOPA)

BENEFITS

▲▲ Identifies zero or limited coverage areas

▲▲ Optimizes placement and uncovers obstructions

▲▲ Developed, tested, manufactured and installed by market leader

▲▲ Reduces probability of failure (1ooN, voted 2ooN, etc.)

▲▲ Risk mitigation documentation that meet requirements

▲▲ Hazard identification, risk mitigation and compliance

Three Dimensional (3D) Mapping Flame and Gas Detection

Advanced Protection in the Most Demanding Conditions

At a Glance

Most detector system placement methods have limitations when it comes to detection of hazards. Det-Tronics expertise and proven detection technologies along with 3D mapping software mitigate risk, meet compliance requirements and advance safety to a new standard. High-risk environments require optimized placement of detectors. Det-Tronics detectors, systems and consulting service continue the legacy of strong leadership to protect and care for our customers and their environments.

FLAME GAS

92-1069

Corporate Office6901 West 110th Street, Minneapolis, MN 55438 USA www.det-tronics.comPhone: 952.941.5665 |Toll-free: 800.765.3473 | Fax: 952.829.8750 | det-tronics@det-tronics.com

All trademarks are the property of their respective owners. © 2014 Detector Electronics Corporation. All rights reserved.Det-Tronics manufacturing system is certified to ISO 9001—the world’s most recognized quality management standard.

CURRENT DIAGRAMMING OPTIONS

Vector: Limited visual description 3D: Advanced approach meets today’s standard

Freehand: Rudimentary 2D: Misses Z-axis

Three Dimensional (3D) Mapping Flame and Gas Detection

Advanced Protection in the Most Demanding Conditions

HOW IT WORKS

➊▲ ▲Det-Tronics consults and gathers important process

data and requirements

➋▲▲Safety analysis and system optimization using

3D software mapping determines preliminary

detector placement

➌▲▲▲Det-Tronics certified fire protection engineers identify zero

coverage and obstructed view areas

➍▲ Coverage area and detector location are defined by

Det-Tronics to mitigate risks

➎ Report delivered using statistical analysis and assessment

Installation of the system based on documentation includes:

▲▲ Detector location (X-, Y-, and Z-axis; inclination and

declination)

▲▲ Confirmation of coverage

▲▲ Statistical analysis

▲▲ Recommendations for detection—technology, sensitivity

and optimized settings

Regulators, insurers and auditors of the detectors and

coverage recognize the high-risk environments and are

becoming more demanding. The ability to detect fire and

gas requires premier level attention. We work with you in the

high-risk zones to deliver top-notch safety and protection.

With 3D mapping and our industry expertise, Det-Tronics once

again advances the standard.

CONTACT US TODAY TO LEARN MORE.

➌

➍

➋

➎