Garrison Industries Mouldings Catalogue
-
Upload
garrison-industries -
Category
Documents
-
view
228 -
download
0
description
Transcript of Garrison Industries Mouldings Catalogue
OULDINGS
ARCHITECTURAL M
g the very best in wood mouldings from
son Industries.
Introduction
It is our distinct pleasure to offer you the 2012 Garrison Industries comprehensive Architectural Moulding Catalog.
We understand the needs of Designers,
Architects and Builders to provide their clients
with quality, value and fast lead times with the
Resources and Products they specify.
Garrison Industries Custom Architectural
Mouldings division can meet those demands.
Utilizing modern industrial equipment and a staff
of highly skilled technicians, Garrison Industries
produces products of unparalled quality with the
capacity for high volume.
With our 2 facilities totaling over 7000 sq.ft.on
Grand Cayman, we can manufacture a broad
range of architectural wood mouldings and
related products, such as curved mouldings
and arches as well as door and exterior
millwork components. Our moulding profiles
and wood quality provides a unique alternative
to distinguish your projects from that of others.
The Garrison Industries tool room specializes in
developing cost effective solutions to produce
even the most complex custom designs (as a
repeat customer, your past projects are
indexed and inventoried for future use). With
an experienced team of professionals from
sales to production, Garrison Industries is a
leader in the Grand Cayman mouldings industry.
Simply look at the sharpness of the edges of
any Garrison Industries produced profile, the
smoothness of the surface of our finish, or the
quality of the wood and you will know that you're
gettin
Garri
2 3
Index 2012 Edition
4 5
Casings
Section 1-1
C101. 3/4” (20mm) x 2-3/4”
Corresponding Baseboards
#B103 or #B104
C102. 3/4” (20mm) x 3-1/2” Correponding Baseboards
#B104
C103. 7/8” (20mm) x 3”
Corresponding Baseboards #B115 or #B107
6 7
Casings Casings
Sectio1-2 Section1-3
C104. 3/4” (20mm) x 2-3/4”
Corresponding Baseboards #B112
C105. 3/4” (20mm) x 3-1/4”
Corresponding Baseboards #B112
C106. 3/4” (20mm) x 3-1/2”
Corresponding Baseboards #B102
C107. 3/4” (20mm) x 3-1/2”
Corresponding Baseboards #B118
C108. 3/4” (20mm) x 3-1/2”
Corresponding Baseboards #B115 or #B114
C109. 3/4” (20mm) x 3-1/2”
Corresponding Baseboards #B104 / #B110 or #B111
C110. 3/4” (20mm) x 3-1/2” Corresponding Baseboards #B108
8 9
Casings Casings
Section1-4 Section 1-5
C111. 3/4” (20mm) x 3-1/2” Corresponding Baseboards #B104 - 1” x 8”
C112. 3/4” (20mm) x 2-3/4” Corresponding Baseboards #B110
C113. 3/4” (20mm) x 3-1/2” Corresponding Baseboards #B104 or #B111
C114. 3/4” (20mm) x 3-1/16” Corresponding Baseboards #B119
C115. 3/4” (20mm) x 2-1/2” Corresponding Baseboards #B101
C116. 7/8” (22mm) x 3-1/2” C117. 7/8” (22mm) x 3”
Corresponding Baseboards #B122 / #B124 or #B125
C118. 7/8” (22mm) x 3-1/2” Corresponding Baseboards #B120
10 11
Casings Casings
Section 1-6 Section 1-7
C119 3/4” (20mm) x 2-3/4”
C123. 1-1/16” (27mm) x 4”
C120 7/8” (20mm) x 4”
C121 3/4” (20mm) x 3-1/2”
C122. 1-1/16” (27mm) x 4”
C124. 3/4” (20mm) x 4-1/4”
C125. 3/4” (20mm) x 2-3/4”
C126. 3/4” (20mm) x 3-1/2”
C127. 11/16” (18mm) x 3-1/8”
12 13
Back Bands
Section 2-1
BB101. 1-5/8” x 1-5/8” (20mm Rabbet) BB102. 13/16” x 1-3/8” (3/4” (20mm) Rabbet)
BB103. 13/16” x 1-1/2” (7/8” (22mm) Rabbet)
BB104. 1-13/16” x 2-3/4” BB105. 3/4” x 1-5/16” (20mm) Rabbet)
BB106. 1-3/4” x 1-7/8” (20mm Rabbet)
14 15
Back Bands
Section 2-2
BB107. 7/8” x 1-5/8” (3/4” (20mm) Rabbet) BB108. 7/8” x 1-3/4” (7/8” (22mm) Rabbet)
BB109. 3/4” x 1-5/16” (20mm Rabbet)
BB110. 13/16” x 1-3/8” (22mm Rabbet) BB111. 7/8” x 1-1/2”(22mm Rabbet)
16 17
Plinth Blocks and Corner Blocks
Section 3-1
CB101. 7/8” x 3” x 3” CB102. 1” x 4-1/2” x 4-1/2” CB103. 1” x 3-3/4” x 3-3/4”
CB104. 1-3/8” x 4-1/2” x 4-1/2” CB105. 1-3/8 x 3-3/4” x 3-3/4” PB101. 1-3/8” x 20” x 4-1/2” CB106. 1-5/16” x 3” x 3” PB102. 1-3/8 x 20” x 3-3/4”
PB103. 1-5/16” x 16” x 3”
18 19
Baseboards
Section 4-1
B101. 3/4” (19mm) x 5-1/2” B103. 3/4” (19mm) x 4-1/2” B107. 3/4” (19mm) x 5-1/2" B102. 3/4” (19mm) x 7-1/4”
Corresponding Casing
B104. 3/4” (19mm) x 5-1/2”
B105. 3/4” (19mm) x 6-1/2”
Corresponding Casing
#C114 #C115 or #C106 B106. 3/4" (19mm) x 7-1/4”
Corresponding Casing #C101 or #C102
20 21
Baseboards Baseboards
B108. 3/4” (19mm) x 7-1/4” B109. 3/4” (19mm) x 7-1/4” B110. 3/4” (19mm) x 5-1/2" Corresponding Casing Corresponding Casing B115. 3/4” (19mm) x 5-1/2” Corresponding Casing
#C110 Corresponding Casing #C112
B111. 3/4” (19mm) x 7-1/4” Corresponding Casing
#C104 #C118 B116. 3/4" (19mm) x 7-1/4” Corresponding Casing
#C112
#C108
Section 4-2 Section 4-3
B112. 11/16” x 4-1/4” B113. 3/4” (19mm) x 6-1/2” B114. 3/4” (19mm) x 4-7/8”
22 23
Baseboards Baseboards
B117. 3/4” (19mm) x 7-1/4” B118. 3/4” (19mm) x 7-1/4” B119. 3/4” (19mm) x 5-1/2" Corresponding Casing Corresponding Casing Corresponding Casing
Section 4-4 Section 4-5
#C118 #C107 #C114
B120. 3/4” (19mm) x 6-1/2” B122. 7/8” (22mm) x 5-1/2”
B121. 3/4” (19mm) x 7-1/4” B123. 7/8” (22mm) x 6-1/2”
Corresponding Casing B124. 7/8” (22mm) 7-1/4”
#C102 or C118 B125. 7/8” (22mm) 8-1/2” Corresponding Casing #C116 or C117
24 25
Baseboards Baseboards
#C126
Section 4-6 Section 4-7
B126. 3/4” (19mm) x 4-1/2”
B127. 3/4” (19mm) x 5-1/2”
B128. 3/4” (19mm) x 7-1/4” B129. 3/4” (19mm) x 7-1/4” B130. 3/4” (19mm) x 7-1/4” B131. 3/4” (19mm) x 8- 3/4" Corresponding Casing
26 27
Crown Moulds
Section 5-1
CM102. 7/8” x 8-1/2
CM101. 3/4” x 5-1/4”
A = PROJECTION B = HEIGHT
A
B
CM101. [A = 3- 11/16"] [B = 3-11/16”]
CM103. 3/4” x 7” CM102. [A = 6”]
[B = 6”]
CM103. [A = 4-15/16”] [B = 4-15/16”]
28 29
Crown Moulds Crown Moulds
Section 5-2 Section 5-3
A = PROJECTION B = HEIGHT
A
B
CM104. [A = 2-11/16”]
[B = 2-11/16”]
CM105. [A = 2”-1/2”]
[B = 2”- 1/2"]
CM106. [A = 3”]
[B = 3”]
CM107. [A = 3-11/16”] CM104. 3/4” x 4-1/4” [B = 3-11/16”]
A = PROJECTION B = HEIGHT
A
B
CM108. [A = 2-11/16”]
[B = 3”]
CM109. [A = 1”- 5/8”]
[B = 1”- 5/8"]
CM108. 3/4" x 4”
CM105. 3/4” x 3-1/2”
CM106. 3/4” x 4-1/4”
CM107. 3/4” x 5-1/4”
30 31
CM109. 3/4" x 2- 3/8”
Crown Moulds Crown Moulds
Section 5-4 Section 5-5
CM110. 1-1/4” x 1-1/4”
CM112. 3/4" x 5-1/4”
A = PROJECTION
B =HEIGHT
A A = PROJECTION
B = HEIGHT B
A CM112. [A = 3-7/8”]
B [B = 3-1/2”]
CM113. [A = 3-11/16”] CM111. [A = 2 -1/2”]
[B = 2- 1/2”] [B = 5-3/4”]
CM111. 3/4” x 3-1/2”
CM113. 1- 5/16" x 6 -7/8”
32 33
Crown Moulds
Section 5-6
CM114. 5/8” x 2-3/4” CM115. 5/8” x 2-1/4”
A = PROJECTION B = HEIGHT
A
B
CM114. [A = 1-7/8”]
[B =2”]
CM115. [A = 1”- 7/16”] [B = 1”- 3/4"]
CM116. 5/8” x 1-5/8” CM116. [A= 1-1/8”]
[B = 1”- 3/16"]
34 35
Chair Rails
Section 6-1
CR101. 1-5/8” x 5-1/2” CR102. 1-5/8” x 5-1/2”
36 37
Chair Rails Chair Rails
(70mm)
Section 6-2 Section 6-3
CR103. 1-5/16” x 3-1/4” CR104. 1-3/4” x 4”
CR107. 1” x 3-5/8” CR108. 3/4” x 3" CR109. 1-1/16” x 3-1/8”
CR105. 1-1/4” x 3-1/4” CR106. 1-5/16” x 3-1/4”
1/2" (73mm)
CR110. 5/8” x 2-1/2” CR111. 1” x 2-1/2" 3/8" CR112. 1-5/16” x 2-1/2”
38 39
Chair Rails Chair Rails
Section 6-4
CR113. 3/4” x 1-3/8” CR114. 9-16” x 1-1/8” CR115. 1-5/16” x 3-1/4”
CR117. 1” x 3”
CR116. 3/4” x 1-3/4” CR118. 3/4” x 1-3/4”
Section 6-5
CR119. 1-5/16" x 4-7/8” CR120. 1-1/16" x 3-7/8” CR121. 1-1/16" x 5-7/8”
40 41
Door Stops
Section 7-1
DS101. 1-3/8” x 3/8” DS102. 1-3/8” x 3/8”
DS103. 1-5/8” x 7/16” DS104. 1-3/4” x 7/16”
DS105. 1-3/4” x 7/16” DS106. 1-3/4” x 7/16”
DS107. 2-1/2” x 1/2”
42 43
Panel Moulds
Section 8-1
PM102. 7/16” x 3/4” PM103. 1/2” x 1-1/16”
PM101. 3/4" x 1-3/4”
PM104. 11/16” x 1-3/8” PM105. 5/8” x 1-9/16” PM106. 7/16” x 1-1/8”
PM107. 3/4” x 2-3/16” PM108. 9/16” x 1-3/4” PM109. 3/4” x 2-1/4”
44 45
Panel Moulds
Section 8-2
Panel Moulds
Section 8-3
PM110. 3/4" x 1-3/4”
PM111. 1-1/16” x 1-1/2”
PM112. 7/16” x 3/4" PM120. 1” x 1-1/4” PM121. 7/8” x 1”
PM122. 5/8” x 1” PM123. 1-1/4” x 1-5/8”
PM115. 3/8” x 11/16”
PM113. 1/2” x 1-5/8” PM114. 3/8” x 1”
PM116. 9/16” x 1-1/8”
PM124. 13/16” x 1-3/8” PM125. 7/8” x 1-1/2”
PM126. 7/8” x 3”
PM117. 1/2” x 1-3/4” PM118. 7/16” x 1-5/16” PM119. 3/8” x 1-1/8” PM127. 7/8” x 3”
46 47
QR/HR115. 1/2" x 1/2”
Quarter Rounds and Half Rounds
Section 9-1
QR/HR101. 3/4" x 1-1/2”
102. 1” x 2”
QR/HR106. 1/2" x 1” QR/HR107. 3/8” x 3/4"
103. 1-1/4” x 2-1/2” 104. 1-1/2” x 3” 105. 1-3/4” x 3-1/2”
QR/HR108. 1/2" x 3/4" QR/HR109. 1/2" x 7/8” QR/HR110. 1/2" x 3/4" QR/HR111. 1/2" x 3/4"
QR/HR112. 1” x 1” QR/HR113. 3/4" x 3/4"
QR/HR114. 5/8” x 5/8”
48 49
Astragals
Section 10-1
A101. 3/4" x 1-5/8”
A102. 9/16” x 2-1/4” A103. 3/4” x 1-5/8"
A104. 3/8” x 1-5/8” A105. [3/8” thick] A106. 1/2" x 1-1/2" Widths of: 1-1/8” 1-3/8”
50 51
Brick Moulds
Section 11-1
BM101. 1-7/32” x 1-11/16”
BM102. 1-5/16” x 2-3/8”
BM103. 1-1/4” x 1-3/4”
BM104. 3/4” x 1-3/4”
BM105. 3/4” x 1-1/4”
52 53
Window Stool
Section 12-1
3/4" (19mm)
3/4" WS101. 1-3/4” x 3-1/2”
(19mm)
WS102. 1-5/16” x 2-3/4”
WS103. 1-1/16” x 2-1/4” WS104. 1-1/16” x 3-1/4” WS105. 1-1/16” x 4-1/4” WS106. 1-1/16” x 5-1/4” WS107. 1-1/16” x 7-3/4
54 55
Tongue & Groove Paneling
Section 13-1
TG101. 3/8” (9mm) x 3-1/8” REVERSIBLE 4.17 LF = 1 sq. ft. coverage
TG102. 1/2” (13mm) x 5-1/2” 2.29 LF = 1 sq. ft. coverage
TG103. 3/8” (9mm) x 3-1/8” REVERSIBLE 4.17 LF = 1 sq. ft. coverage
TG104. 3/4” (19mm) x 3-1/2” 3.69 LF = 1 sq. ft. coverage
TG105. 3/4” (19mm) x 4-3/4” 2.67 LF = 1 sq. ft. coverage
TG106. 3/4” (19mm) x 5-1/2” 2.28 LF = 1 sq. ft. coverage
56 57
Combinations (Crown)
Section 14-1
DOOR STOP - #DS107
CROWN - #CM103
BASEBOARD - #B103
DOOR STOP #DS107
CROWN - #CM101
1x3 (3/4”x2-1/2”)
1-1/2”x2”-1/2”)
CROWN - #CM115
58 59
Combinations (Crown) Combinations (Crown)
Section 14-2 Section 14-3
CROWN - #CM101 BASEBOARD - #B103
2”x2’ (1-1/2” x 1-1/2”)
1”x6’ (3/4” x 5-1/2”)
CROWN - #CM107
PANEL MOLUD - #PM123 CROWN - #CM105
1”x6’ (3/4” x 5-1/2”)
HALF ROUND - #HR107
BASEBOARD - #B114
CROWN #CM101
BASEBOARD - #B103
PANEL MOLUD - #PM123 BASEBOARD - #B103
60 61
Combinations (Crown) Combinations (Crown)
Section 14-4 Section 14-5
BRICK MOULD - #BM102
CROWN - #CM101 2’x2” (1-1/2”x1-1/2”)
DOOR STOP - #DS101
BRICK MOULD - #BM101
CASING - #C107
CROWN - #CM111
CROWN - #CM101
#B110
BASEBOARD
DOOR STOP #DS105
BASEBOARD - #B110
BASEBOARD - #B115
62 63
Combinations (Crown) Combinations (Crown)
Section14-6 Section14-7
BASEBOARD - #B115
CROWN - #CM107
CROWN #CM106
HALF ROUND - #HR107
BASEBOARD - #B115 CROWN - #CM114
BASEBOARD - #B115 CROWN - #CM104
2”x 2” (1-1/2” x 1-1/2”)
1”x4” (3/4”x 3-1/2”)
PANEL MOULD - #PM111 PANEL MOULD - #PM104
64 65
Combinations (Apron & Sill) Combinations (Apron & Sill)
Section 14-8 Section 14-9
STOOL - #WS103 STOOL - #WS104
BRICK MOULD - #BM104 DOOR STOP- #DS104
STOOL - #WS104 CASING - #C107
STOOL - #WS104
BACK BAND - #BB108
CASING - #C108
CASING - #C118
66 67
Combinations (Moulding) Combinations (Moulding)
Section 14-10 Section 14-11
BACK BAND - #BB101
CASING - #C115
BASEBOARD - #B101 BASEBOARD - #B110
CASING -
#C112
CASING - #C107 CASING #C101/ #C102
BASEBOARD BASEBOARD - #B103/ #B104 #B115 #B105/ #B106
BACKBAND BACK BAND - #BB102 #BB107
BACK BAND #BB109
CASING - #C114 CASING - #C112
CHAIR RAIL - #CR108 CHAIR RAIL - #CR111 CASING #C125 CASING
#C121
BASEBOARD - #B113
BASEBOARD - #B127
BASEBOARD - #B101
BASEBOARD #B109
68 69
Combinations (Moulding) Combinations (Moulding)
Section 14-12 Section 14-13
CHAIR RAIL - #CR110 CASING - #C119
CASING #C122
BACK BAND #BB109 BACKBAND
#BB107 CASING - #C106 CASING 1/ 1A
#C101/ #C102
BASEBOARD - #B126
BASEBOARD - #B129 BASEBOARD
#B102 BASEBOARD
#B104
BACK BAND - #BB106
BASE SHOE #HR/QR108
BACK BAND - #BB107
BACK BAND #BB108
CHAIR RAIL - #CR117
CASING - #C124
CASING - #C123
CHAIR RAIL CASING #CR110 CASING #C116/ #C117
#C101/ #C102
BASEBOARD #B128
BASE SHOE #DS104
BASEBOARD - #B129
BASEBOARD #B106
BASE SHOE #DS101
BASEBOARD - #B122/ #B123 #B124/ #B125
BASE SHOE
#BM105
70 71
General Notes General Notes
Section 15-1
Casings and Bases Garrison Industries utilizes many combinations of edge profiles to produce a multitude of bases and casings. All profiles on these pages are not drawn to actual size. There may be slight variations between the drawings and actual profiles. We recommend you obtain a sample for situations requiring very accurate dimensions.
Custom Mouldings If you cannot find the mouldings that suit your needs in our stocked moulding selection, we will be glad to produce any custom moulding you desire. Center and edge profiles on our standard bases and casings can be mixed and matched in various combinations to create the custom profile that suits your requirements. Stock is available up to 9 inches wide, in 4/4, 5/4, 6/4 and 8/4 thickness.
Set-up Charges on Custom Mouldings Set-up charges may be applied to custom moulding orders. Contact our order desk for pricing.
Custom Knife Grinding We specialize in milling mouldings to match existing millwork. Knives can be ground to match any pattern or profile that cannot be found in this catalogue. We can produce knives from a sample of an existing moulding, architectural drawings, tracing or paper pattern. Custom orders can generally be delivered within 2 weeks. We also have an inventory of custom knives. Knives remain the property of Garrison Industries Ltd.
Length We buy our wood in random lengths and produce the optimum length of moulding according to each particular use. Unless specified, mouldings are produced in random lengths varying from 8 to 16 feet.
Please allow for a 10-15% waste factor when ordering.
Orders that require specified lengths may be subject to a 15% surcharge.
Section 15-2
Materials Virtually any profile can be run in any species such as African Mahogany (Sapele), Ash, Beech, Birch, Fir, Maple, Oak to name a few. Please inquire about pricing and lead times.
All materials must be inspected and signed for by customer upon pick up and/ or delivery to insure Profile and Quantities are correct.
Garrison Industries uses North American Poplar for all its mouldings, unless a special species requests is made.
All raw moulding may have natural color variations due to characteristics of the wood type.
Finishing
Garrison Industries provides a pre-finishing service for your mouldings. Our paint and stain finishes are among the most consistent and can be matched to existing furniture or from color samples provided.
Installation
We at Garrison Industries take pride in our Moulding installation process. We install both paint grade or stain grade mouldings with the same high level of quality and precision.
Minimums
Delivery charge may apply on all moulding orders. Delivery outside of the G.T. Area - Special pricing may apply.
Samples
Samples are available upon request.
We reserve the right to change prices and product specifications without notice
72 73
74