Garmin GNS 430 GPS Cirrus Transition Course 12/23/03.

Garmin GNS 430 GPS

Cirrus Transition Course

12/23/03

The system information, procedures and guidelines found in this presentation are for Reference Only.

The information & procedures in this presentation have been taken from the FAA Approved Airplane Flight Manual and Pilot’s Operating Handbook (POH). The Information & Procedures in this presentation DO NOT SUPERSEDE the Information & Procedures in the POH. In the event of conflict, the POH shall take precedence.

GeneralActs as a communications and navigation management system

Integrates radio transceiver, navigation receiver, and GPS navigation capability into a single unit

Chapter and Page Selection

FunctionsC Knob

Power / Com Volume

Squelch

V KnobVLOC Volume

Ident

C FlipMoves standby Com frequency to active

V FlipMoves standby VLOC frequency to active

FunctionsPush C/V

Selects between Comm and VLOC frequency selection

Large Knob

Small Knob

Data card 1Contains Jeppesen NavData

Data card 2Unused

FunctionsCDI

Selects between GPS and VLOC navigation data

OBSSelection inhibits auto sequencing of waypoints

MSGDisplays Message Page

FPLDisplays Flight Plan Chapter

PROCDisplays Instrument Procedures for active waypoint

FunctionsRNG

Adjusts moving map

DDirect To function

MENUDisplays menu for current activity

CLRClears data field

Default Nav – Hold for 3 seconds

FunctionsENT

Activates function

PUSH CRSRActivates cursor for active function

Large KnobSequences between data fields

Small KnobSelects character in current data field

InitializationPower Up

InitializationLand Data Initialization

InitializationDatabase Cycle

Database Expiration Date

InitializationInstrument Panel Self-Test

StructureChapters

Current chapter identified by white letters at bottom of screen

PagesCurrent page number indicated by position of white block at bottom of screen

Chapter Page Number

Structure (Nav Chapter)Nav 1

Electronic CDI Needle

Active Waypoint

User definable data

Default Nav Page


Moving Map

User definable fields at right

Map has three declutter levels, cycled by pressing CLR


Frequency information page for active flight plan

Cycles between departure and arrival airports frequency information automatically


Position

Commonly used during partial panel operations


Satellite Status

Solid bars indicate satellite acquired

Height of bar indicates satellite signal strength

White number below bar indicates satellite number


Vertical Navigation (VNAV)

Cannot be used for approach vertical guidance

CAUTION

Structure (WPT Chapter)Wpt 1

Airport Location

Changes made in WPT chapter do not effect active flight plan or navigation without specific pilot direction


Airport Runway

Information for all airport runways can be viewed by selecting the runway data block and scrolling


Airport Frequencys


Airport Approach


Airport Arrival


Airport Departure

Obstacle DP’s are not included in database

Vector DP’s are not included in database


Intersection


NDB


VOR


User Waypoint

Structure (AUX Chapter)Aux 1

Flight Planning


Utility


Setup 1


Setup 2

Structure (NRST Chapter)Nrst 1

Nearest Airports


Nearest Intersections


Nearest NDB


Nearest VOR


Nearest User Waypoints


Nearest Center


Nearest Flight Service Station


Nearest Airspace

Structure (FPL Access Key)Fpl 1

Active Flight Plan

Structure (FPL Access Key)Fpl 2

Flight Plan Catalog

Can store 19 user defined flight plans

Structure (FPL Access Key)Proc

Instrument Procedures

OperationVFR Operations

Garmin GNS 430 GPS Cirrus Transition Course 12/23/03.

Documents

Transcript of Garmin GNS 430 GPS Cirrus Transition Course 12/23/03.