Gama de PRODUCT productos RANGEdonar.messe.de/exhibitor/hannovermesse/2017/V292830/... · 2016. 11....
Transcript of Gama de PRODUCT productos RANGEdonar.messe.de/exhibitor/hannovermesse/2017/V292830/... · 2016. 11....
-
an EnPro Industries company
Gama de productosPRODUCT
RANGE
The Global Leader
in High Performance
Bearing Solutions
-
The GGB AdvantageThe GGB Advantage
2
Improved energy efficiency
The GGB maintenance-free bearings reduce performance loss and increase efficiency.
Lower material costs
The slim, compact bearing design provides significant space and weight reductions, and guarantees that your material costs will be lower.
Less noise and lower system costs
Since they do not contain any moving parts, GGBbearings provide low-noise operation. The slim, one-piece design makes installation easier, reduces installation costs and minimises potential damage during installation.
Replacement of expensive needle bearings
GGB bearings can replace expensive needle bearings in certain applications, since their larger contact surface has a higher load bearing capacity, better impact resistance and improved performance.
Comprehensive customer support
As one of the world's leading companies for high-performance bearing solutions, our bearing specialists have the expert knowledge with which innovative, cost-effective and reliable solutions for the
most demanding applications can be provided. As a flexible supplier, we also provide short delivery times for the industry's biggest range of high-performance bearings.
Environmentally friendly
The low-cost, lead-free GGB bearings comply with environmental
legislation, which is becoming increasingly
stricter, such as the RoHS directive, which
restricts the use of hazardous substances
in electrical and electronic equipment. RoHScompliant
-
3
GGB History 2013
2012
2011
2010
2009
2008
2007
2004
2003
2002
1998
1996
1995
1986
1978
1976
1974
1970s
1965
1958
1956
1910s
1899
GGB bearings land on Mars aboard NASA´s Curiosity rover. TMDTS10 machinable metal-polymer bearings are launched
for the fluid power and compressor markets.
TM TMIntroduced lead-free DP10 and DP11 metal-polymer
materials for superior performance under marginally
lubricated and dry running conditions.
Production facility opened in Suzhou, China; ® TMnew DX10 with DuraStrong technology bearings
won Frost & Sullivan's product innovation of the year
award in the Class 7-8 truck bearings category.
Glacier Garlock Bearings changes name to GGB.
Opening of new manufacturing plant Sučany, Slovakia.
Goodrich creates a new public company and splits
it off to its shareholders. EnPro Industries Inc.
becomes the new parent of Glacier Garlock Bearings.
TMLaunched new range of EP solid polymer materials.
®Launched HI-EX metal-polymer material,
designed for high temperature applications.
Glacier and Garlock Inc. establish
joint venture company Garlock Bearings Inc.
Glacier licenses technology to a number of
overseas bearing manufacturers.
Licensees include: SIC (France), Garlock Bearings (USA).
Garlock Inc. was founded as a bearing distributor
when an agreement was reached with Glacier.
Began making plain bearings in response to
increased demand for internal combustion engines.
Acquired PI Bearing Technologies, now GGB Chicago, TMa producer of PICAL aluminium alloy bushing blocks for
demanding fluid power applications. GGB plants certified
to OHS18001 for health and safety management systems.
GGB launches new self-lubricating metallicTM TMbearing materials GGB-CSM and GGB-CBM
TMas well as FLASH-CLICK , patented two-piece,
double-flanged solid polymer bearings.
Filament-wound product range introduced to the
European and Asian markets;
GGB North America certified to AS9100B, the aerospace
industry's standard for quality management systems.
TMIntroduced SBC (Sealed Bearing Cartridges) for
off-highway equipment applications;
acquired Böhringer Kunststofftechnik GmbH,
precision injection molder of high-
performance solid polymer solutions.
TMIntroduced lead-free DP31 metal-polymer material with
improved performance under lubricated conditions.
Acquisition of Saver North America, a producer
of self-lubricating composite bearings.
Glacier Garlock Bearings expands activities in Asia.
Manufacture of plain bearings exceeds one billion pieces per year.
TMIntroduced lead-free steel backed DP4 metal-polymer
material for automotive shock absorbers and other TMhydraulic applications. Introduced DP4-B with bronze
backing for improved corrosion resistance.
Introduced filament wound product range®in the USA including GAR-MAX .
TMBegan continuous casting of the SICAL range
of aluminium alloys and high precision
machining of bushing blocks in Dieuze, France.
®Launched the marginally lubricated DX metal-
polymer material for greased applications.
®Introduced DU , the world´s first steel backed metal-
polymer bearing material with bronze and PTFE lining
offering excellent low friction and wear resistance TMperformance. Introduced DU-B with bronze
backing for improved corrosion resistance.
Findlay and Battle founded Findlay Motor Metals.
The company was renamed to
Glacier Antifriction Metal Company two years later.
-
4
These certificates are also available for download on our website www.ggbearings.com/certificates
BRAZIL
FRANCE
SLOVAKIA USA
GERMANY
CHINA
EnPro Industries, Inc.is a leading manufacturer of plain bearings, sealing products, compressor components and other applied products. EnPro Industries delivers products for highly demanding applications in industries worldwide.
Besides GGB, Technetics Group, Stemco, Garlock family of companies, Fairbanks Morse Engine and CPI are part of EnPro Industries.
Registered office in Charlotte, North Carolina
Annual sales in 2012: 1,18 Billion USD
5,500 employees
61 production facilities globally
more than 50,000 customers in over 100 countries worldwide
www.enproindustries.com
-
5
TM TM TM TM TM TM® ®GGB , DP4 , DP4-B , DU , DU-B , DP10 , DP11 , DP31 , TM TM TM® ® ® ® ® ®DX , DX 10, HI-EX , SY , SP , DS , EP , EP 12, EP 22,
TM® ® ® ® ® ®EP 43, EP 44, EP 63, EP 64, EP 73, EP 79, Glacetal KA , TM TM TM TM® ®Multilube , Multifil , DB , GAR-MAX , HSG , GAR-FIL ,
TM TM TM TM TM TM TMMLG , HPF , HPM , SBC , MEGALIFE , UNI , MINI , TM TM TM TMSICAL 3 , SICAL 3D PICAL 2 and PICAL 3 are trademarks
of GGB
TMEXALIGN is a product of Cryptic Arvis Ltd., Leicester, UK
©2013 GGB. All rights reserved.
GGB gives an assurance that the products described in this
document have no manufacturing errors or material deficien-
cies. The details set out in this document are registered to assist
in assessing the material's suitability for the intended use. They
have been developed from our own investigations as well as
from generally accessible publications. They do not represent
any assurance for the properties themselves.
Unless expressly declared in writing, GGB gives no warranty
that the products described are suited to any particular purpose
or specific operating circumstances. GGB accepts no liability
for any losses, damages or costs however they may arise
through direct or indirect use of these products.
GGB’s sales and delivery terms and conditions, included as an
integral part of quotations, stock and price lists, apply absolute-
ly to all business conducted by GGB. Copies can be made avail-
able on request.
Products are subject to continual development. GGB retains
the right to make specification amendments or improvements
to the technical data without prior announcement.
Edition 2013 (This edition replaces earlier editions which hereby
lose their validity).
Product Information
Declaration on lead contents of GGB products/compliance with EU law
Since July 1, 2006 it has been prohibited under Directive
2002/95/EC (restriction of the use of certain hazardous sub-
stances in electrical and electronic equipment; ROHS Directive)
to put products on the market that contain lead, mercury, cad-
mium, hexavalent chromium, polybrominated biphenyls (PBB)
or polybrominated diphenyl ethers (PBDE). Certain applica-
tions listed in the annex to the ROHS Directive are exempted.
A maximum concentration value of 0.01% by weight and per
homogeneous material, for cadmium and of 0.1% by weight
and per homogeneous material, for lead, mercury, hexavalent
chromium, PBB and PBDE shall be tolerated.
According to Directive 2000/53/EC on end-of life vehicles, since
July 1, 2003 it has been prohibited to put on the market ma-
terials and components that contain lead, mercury, cadmium or
hexavalent chromium. Due to an exceptional provision, lead-
containing bearing shells and bushes could still be put on the
market up until July 1, 2008. This general exception expired on
July 1, 2008. A maximum concentration value of up to 0.1% by
weight and per homogeneous material, for lead, hexavalent
chromium and mercury shall be tolerated.
®All products of GGB in this brochure, with the exception of DU , TM TM TM TM TM TMDU-B , DB , PICAL2 , SY , SP , GGB-CSM 115, GGB-
TM TM TM TMCSM 118, GGB-CSM 124, GGB-CSM 125, GGB-CBM 311, TM TM TMGGB-CBM 312, GGB-CBM 321, GGB-CBM 322, GGB-
TM TMCBM 341 and GGB-CBM 342 satisfy these requirements of
Directives 2002/95/EC (ROHS Directive) and 2000/53/EC (End-
of-life Vehicle Directive).
All products manufactured by GGB are also compliant with
REACH Regulation (EC) No. 1 907/2006 of December 18, 2006.
-
Product Range
6
Summary of Bearing Materials and Products
Material name
Material name
Solid Polymer Materials
Filament Wound Materials
Working conditions
Working conditions
Page
Page
®DU
TMDS
®EP
TMDU-B
TMDP4
TMDP10TMDP11
St + porous bronze sinter + PTFE + Pb
St + porous bronze sinter + POM modified
PA6.6T + glass fibres + PTFE + graphite
Bz + porous bronze sinter + PTFE + Pb
St + porous bronze sinter + PTFE + fillers
St + porous bronze sinter + PTFE + solid lubricants
St + porous bronze sinter + PTFE + solid lubricants + fillers
Bz + porous bronze sinter + PTFE + fillers
self lubricating
self lubricating, low-maintenance
self lubricating
self lubricating
self lubricating
self lubricating
self lubricating
self lubricating
self lubricating
self lubricating
self lubricating
self lubricating, corrosion resistant
self lubricating, low-maintenance
self lubricating, low-maintenance
self lubricating, low-maintenance
self lubricating, corrosion resistant
8
14
14
8
8
10
10
®HI-EX St + porous bronze sinter + PEEK + PTFE + fillers low-maintenance 14
®DX®DX 10
St + porous bronze sinter + POM with lubrication indents
low-maintenance 12
TMDP31 12
12
St + porous bronze sinter + PTFE + fluoropolymer + fillers low-maintenance
TMDP4-B
10
®EP 12®EP 22®EP 43®EP 44®EP 63®EP 64
16
16
16
18
18
18®EP 73 20®EP 79 20
POM + PTFE
PBT + PTFE
PPS + PTFE + aramid
PPS + PTFE + carbon fibres
PEEK + PTFE + aramid
PAI + graphite + PTFE
PAI + carbon fibres + PTFE
PEEK + PTFE + graphite + carbon fibres
low-maintenance
St + porous bronze sinter + high tech polymer with or without lubrication indents
self lubricating 22TMMultilube Proprietary injection molded engineering thermoplastic
self lubricating, low-maintenance 20TMGlacetal KA POM
self lubricating
self lubricating
22
22
®GAR-MAX
TM HSG High- ®Strength GAR-MAX
Sliding layer: Continuous wound PTFE and high-strength fibres encapsulated in an internally lubricated, high tempera-ture filled epoxy resin - Backing: Continuous wound fiber-glass encapsulated in a high temperature epoxy resin.
Sliding Layer: Continuous wound PTFE and high-strength fibres encapsulated in an internally lubricated, high tempera-ture filled epoxy resin - Backing: Continuous wound fiber-glass encapsulated in a high temperature epoxy resin.
self lubricatinglow-maintenance
TMSBCSealed Bearing Cartridges
24Composite material with sealingSBC bearings are available with GAR-MAX and HSG and are sealed to exclude contaminants. SBC are optionally available with a steel outer shell.
Material name Metal-Polymer Materials Working conditions Page
-
Product Range
GGB Manufacturing Facilities
Data Sheet
72
73
Information
Summary of Bearing Materials and Products
Material name
Bearing Blocks Bearing blocks made from aluminium alloysfor use with different GGB cylindrical bushes
depends on used bearing material
28
Working conditions PageBearing Blocks
TM TMEXALIGN -, UNI -TMand MINI -
bearing housings
Self-aligning bearing housings self lubricatinginitial lubrication
34
Working conditions PageComplementary MaterialsMaterial name
7
self lubricating
self lubricating
self lubricating
self lubricating
self lubricating
24
26
26
26
24
®GAR-FIL
TMMLG
TMHPF
TMHPM
TMMEGALIFE XT
self lubricating 28TMMultifil PTFE + proprietary filler system
Sliding layer: Continuous wound PTFE and high-strength fibers encapsulated in high temperature epoxy resin Backing verbiage: Continuous wound fiberglass encapsulated in high temperature epoxy resin
Sliding layer: Proprietary filled PTFE tape linerBacking: Continuous woven fiberglass cloth laminate impregnated and cured with epoxy resin
Sliding layer: Continuous wound PTFE and high-strength fibers encapsulated in a self-lubricating, high temperature epoxy resin Backing: Continuous wound fiberglass encapsulated in a high temperature epoxy resin
Sliding layer: Proprietary filled PTFE tape liner, 0,38 mm (0,015 inch) standard thickness, 0,76 mm (0,03 inch) on requestBacking: Continuous wound fiberglass encapsulated in a high temperature epoxy resin
Sliding layer: Proprietary filled PTFE tape liner on both sidesCore: Continuously woven layer of filament fiberglass encapsulatedin a high temperature epoxy resin
PageMaterial name Filament Wound Materials cont. Working conditions
Materials and Dimensions 36
Standard Stock Bearings
Standard Stock Bearings
TMSY
TMSP
Steel-lead-bronze-compound materialSt + CuPb10Sn10 with lubrication indents
Steel-lead-bronze-compound materialSt + CuPb26Sn2
low-maintenance
low-maintenance
self lubricatingTMDB Dry bearing materialCast bronze + solid lubricant inserts
28
Sintered BronzeBearings
Machined BronzeBearings acc. to ISO 4379
Bronze sinter impregnated with oilsimilar to Sint A50, impregnation group 1
Solid bronze alloy bearings
self lubricating(impregnated with oil)
conventionallubrication
30
32
Material name Mono- and Bimetal Materials Working conditions Page
32
32
TMGGB-CSM
TMGGB-CBM
Monometallic materialPowder metallurgical bearing material
Bimetal materialThin walled, powder metallurgical bimetal bearing material
self lubricating
self lubricating
30
30
-
Product Range
8
TMDP4Features
Compliant with the European Union's End of Life Vehicles (ELV) directive 2000/53/EC on the elimination of hazardous materials in the construction of passenger cars and light trucks
Compliant with the European Union Directive 2002/95/EC concerning the re-striction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Regulation)
Lubricated conditions
Good wear resistance and low friction performance over a wide range of load, speed and temperature conditions
Very good performance in oil lubricated heavy duty hydraulic applications
TM DP4 offers benefits in applications where ®corrosion of the lead in DU may occur
TM DP4 offers improved wear and friction performance along with good chemical
®resistance compared to DU
Dry conditions
TM DP4 perforns well dry under light duty applications
Particularly suitable for intermittent operation under reciprocating or oscillating movements
Availability
Ex stock:
Cylindrical bushes, flanged bushes, thrust washers, flanged washers and strip
To order:
Non-standard parts
Usage
dry good
oil lubricated very good
grease lubricated good
water lubricated fair
process fluid lubricated good
Cylindrical bushes Flanged bushes
Thrust washers Flanged washers
Strips
Features
Compliant with the European Union's End of Life Vehicles (ELV) directive 2000/53/EC on the elimination of hazardous materials in the construction of passenger cars and light trucks
Compliant with the European Union Directive 2002/95/EC concerning the re-striction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Regulation)
Lubricated conditions
Good wear resistance and low friction performance over a wide range of load, speed and temperature conditions
Very good performance in oil lubricated heavy duty hydraulic applications
TM DP4-B offers benefits in applications ®where corrosion of the lead in DU may
occur
TM DP4-B offers improved wear and friction performance along with good chemical
®resistance compared to DU
Dry conditions
TM DP4-B perforns well dry under light duty applications
Particularly suitable for intermittent operation under reciprocating or oscillating movements
Availability
Ex stock:
Standard cylindrical bushes, flanged bushes and strip partly
To order:
Thrust washers, flanged washers and non-standard parts
Usage
dry good
oil lubricated very good
grease lubricated good
water lubricated good
process fluid lubricated good
Cylindrical bushes Flanged bushes
Thrust washers Flanged washers
Strips
TMDP4-B
Dry bearing material with very good wear
and friction performance over a wide range
of loads, speeds and temperature con-
ditions
® DU also performs well with lubrication
Available from stock in a wide range of
standard sizes
Availability
Ex stock: Standard cylindrical bushes, roll-formed bus-
hes, flanged bushes, thrust washers, flanged
washers, strip
To order:Non-standard parts
Features®DU
Usage
dry very good
oil lubricated good
grease lubricated fair
water lubricated fair
process fluid lubricated fair
Cylindrical bushes Flanged bushes
Thrust washers Flanged washers
Strips
-
9
TMDP4
Metal-polymer material
Steel + porous bronze sinter + PTFE +
fillers
Possible Applications
Automotive: Braking systems, clutches, gear-box and transmissions, hinges: door, bonnet, boot, cabriolet roof tops, pedals; pumps: axial piston, radial piston, gear and vane; seat mechanisms, steering systems, struts and shock absorbers, wiper systems, etc.
Industrial: Aerospace, agricultural equip-ment, construction equipment, food and be-verage, material handling equipment, forming machines: metal, plastic and rubber; office equipment, medical and scientific equipment, packaging equipment, pneumatic and hyd-raulic cylinders, pumps and motors, railroad and tramways, textile machinery, valves, etc.
sliding layerPTFE + fillers
bronze sinter
steel backing
Bearing properties Units Value Maximum load p - static 250
MPa - dynamic 140
Maximum sliding speed v - dry 2.5m/s
- oil lubricated 5.0
Maximum pv factor - dry 1.0MPa x m/s
- oil lubricated 10.0
Maximum temperature T °C +280max Minimum temperature T °C - 200min
Coefficient of friction f - dry - 0.04 - 0.25 - oil lubricated - 0.02 - 0.08
Shaft surface finish Ra - dry operation m 0.4 ± 0.1
Shaft hardness HB >200
Metal-polymer material
Bronze + porous bronze sinter + PTFE +
fillers
Possible Applications
Automotive: TMsee DU-B
Others: Civil engineering, marine and offshore equip-ment, other applications in water or in outdoor environments, etc.
Bearing properties Units Value Maximum load p - static 140
MPa - dynamic 140
Maximum sliding speed v - dry 2.5m/s
- oil lubricated 5.0
Maximum pv factor - dry 1.0MPa x m/s
- oil lubricated 10.0
Maximum temperature T °C +280max Minimum temperature T °C - 200min
Coefficient of friction f - dry - 0.04 - 0.25 - oil lubricated - 0.02 - 0.08
Shaft surface finish Ra - dry operation m 0.4 ± 0.1
Shaft hardness HB >200
TMDP4-B
sliding layerPTFE + fillers
bronze sinter
bronze backingseawater resistantantimagnetic
®DU
Metal-polymer material
Steel + porous bronze sinter + PTFE + Pb
Possible Applications
Industrial:Aerospace, agricultural equipment, construction equipment, material handling equipment, forming machines - metal, plastic and rubber; office equipment, medical and scientific equipment, packaging equipment, pneumatic and hydraulic cylinders, pumps and motors, railroad and tramways, textile machinery, valves, etc.
sliding layer
PTFE + Pb
bronze sinter
steel backing
Bearing properties Units Value Maximum load p - static 250
MPa - dynamic 140
Maximum sliding speed v - dry m/s 2.5
Maximum pv factor - dry, continuous operation 1.8MPa x m/s
- dry, intermittent operation 3.5
Maximum temperature T °C +280max Minimum temperature T °C - 200min
Coefficient of friction f - dry - 0.02 - 0.25 - oil lubricated - 0.02 - 0.12
Shaft surface finish Ra - dry operation m 0.4 ± 0.1
hardened and un-Shaft hardness HB
hardened possible
-
Product Range
10
Dry bearing material with very good wear
and friction performance over a wide range
of load, speed and temperature conditions
TM DU-B also performs well with lubrication
Bronze backing provides improved corro-®sion resistance compared with DU
Available from stock in a wide range of
standard sizes
Antimagnetic
TM DU-B material approved according to
EN1337-2 standard for structural bearings
for civil engineering applications
Availability
Ex stock: Standard cylindrical bushes, flanged bushes
and strip
To order:Thrust washers, flanged washers and non-
standard parts
Features
Usage
dry very good
oil lubricated good
grease lubricated fair
water lubricated good
process fluid lubricated fair
Cylindrical bushes Flanged bushes
Thrust washers Flanged washers
Strips
TMDU-B
Cylindrical bushes Flanged bushes
Thrust washers Strips
Special parts
TMDP10Features
Compliant with the European Union's End of Life Vehicles (ELV) directive 2000/53/EC on the
elimination of hazardous materials in the
construction of passenger cars and light trucks
Compliant with the European Union directive
2002/95/EC concerning the restriction of the
use of certain hazardous substances in electri-
cal and electronic equipment (the RoHS
Regulations)
Good dry wear resistance and low friction
performance over a wide range of loads,
speeds and temperature conditions
Performs well with lubrication, particularly
under marginally lubricated conditions
Availability
Ex stock: N/A
To order: Cylindrical bushes, flanged
bushes, thrust washers, flanged washers, half
bearings, flat components, deep drawn parts,
pressings, stampings, modified standard
components
Usage
dry good
oil lubricated good
grease lubricated fair
water lubricated not recommended
process fluid lubricated fair
Usage
dry good
oil lubricated good
grease lubricated fair
water lubricated not recommended
process fluid lubricated fair
Cylindrical bushes Flanged bushes
Thrust washers Strips
Special parts
TMDP11Features
Compliant with the European Union's End of Life Vehicles (ELV) directive 2000/53/EC on the
elimination of hazardous materials in the
construction of passenger cars and light trucks
Compliant with the European Union directive
2002/95/EC concerning the restriction of the
use of certain hazardous substances in electri-
cal and electronic equipment (the RoHS
Regulations)
Good dry wear resistance and low friction
performance over a wide range of loads,
speeds and temperature conditions
Very good dry wear resistance and low fricti-
on performance under high frequency and
low amplitude oscillating movements
Availability
Ex stock: N/A
To order: Cylindrical bushes, flanged
bushes, thrust washers, flanged washers,
strip, non-standard parts
-
11
TMDU-B
Metal-polymer material
Bronze + porous bronze sinter + PTFE
+ Pb
Possible Applications
Industrial:®see DU
Others:
Marine and offshore equipment, other appli-
cations in water or in outdoor environments
Bearing properties Units Value Maximum load p - static 140
MPa - dynamic 140
Maximum sliding speed v - dry m/s 2.5
Maximum pv factor - dry, continuous operation 1.8MPa x m/s
- dry, intermittent operation 3.5
Maximum temperature T °C +280max Minimum temperature T °C - 200min
Coefficient of friction f - dry - 0.02 - 0.25 - oil lubricated - 0.02 - 0.12
Shaft surface finish Ra - dry operation m 0.4 ± 0.1
hardened and un-Shaft hardness HB
hardened possible
sliding layer
PTFE + Pb
bronze backing
seawater resistant
antimagnetic
bronze sinter
TMDP10
Metal-polymer material
Steel + porous bronze sinter + PTFE +
solid lubricants
Possible Applications
Automotive: Braking systems, clutches, hinges: door, bonnet, boot, cabriolet roof tops, pedals; pumps: axial, piston, gear, vane; seat mecha-nisms, steering systems, struts and shock absorbers, wiper systems, etc. Industrial: Agricultural equipment, compressors: scroll
and reciprocating; construction equipment, food and beverage, material handling equip-ment, forming machines: metal, plastic and rubber; office equipment, medical and scien-tific equipment, packaging equipment, pneu-matic and hydraulic cylinders, pumps and motors, railroad and tramways, textile machi-nery, valves, etc.
Bearing properties Units Value Maximum load p - static 250
MPa - dynamic 140
Maximum sliding speed v - dry 2.5m/s
- oil lubricated 5.0
Maximum pv factor - dry 1.0MPa x m/s
- oil lubricated 10.0
Maximum temperature T °C +280max Minimum temperature T °C - 200min
Coefficient of friction f - dry - 0.03 - 0.25 - oil lubricated - 0.02 - 0.08
Shaft surface finish Ra - dry operation m 0.4 ± 0.1
Shaft hardness HB >200
sliding layerPTFE + solid lubricants
bronze sinter
steel backing
TMDP11
Metal-polymer material
Steel + porous bronze sinter + PTFE +
solid lubricants + fillers
Possible Applications
Automotive: Belt tensioners, clutches, dual mass fly-wheels, pulley dampers, etc.
Industrial:Applications with high frequency and low amplitude oscillating movements
Bearing properties Units Value Maximum load p - static 250
MPa - dynamic 140
Maximum sliding speed v - dry 2.5m/s
- oil lubricated 5.0
Maximum pv factor - dry 1.0MPa x m/s
- oil lubricated 10.0
Maximum temperature T °C +280max Minimum temperature T °C - 200min
Coefficient of friction f - dry - 0.04 - 0.25 - oil lubricated - 0.02 - 0.08
Shaft surface finish Ra - dry operation m 0.4 ± 0.1
Shaft hardness HB >200
sliding layerPTFE + solid lubricant s + fillers
bronze sinter
steel backing
-
Product Range
12
Cylindrical bushes Flanged bushes
Thrust washers Flanged washers
Strips
TMDP31Availability
To order:
Cylindrical bushes, flanged bushes, thrust was-
hers, flanged washers, strip, non-standard parts
Features
Compliant with the European Union's End of
Life Vehicles (ELV) directive 2000/53/EC on
the elimination of hazardous materials in the
construction of passenger cars and light
trucks
Compliant with the European Union direc-
tive 2002/95/EC concerning the restriction
of the use of certain hazardous substances
in electrical and electronic equipment (the
RoHS Regulations)
Lubricated conditions:
Excellent wear resistance and low friction
performance in lubricated hydraulic appli-
cations
Excellent chemical resistance
Excellent cavitation and flow erosion
resistance
Good fatigue strength
Usage
dry fair
oil lubricated very good
grease lubricated fair
water lubricated fair
process fluid lubricated good
Availability
Ex stock:
Cylindrical standard bushes, roll-formed
bushes, thrust washers and strip
To order:
Non-standard parts
Features
Marginally lubricated bearing material for
grease or oil lubricated applications
Standard parts contain grease indents in
the sliding layer; plain sliding layer available
on request
Order-related also available with plain
sliding layer
Optimum performance under relatively high
loads and low speeds
Suitable for linear, oscillating and rotating
movements
Wide range of parts available from stock
Usage
dry poor
oil lubricated good
grease lubricated very good
water lubricated poor
process fluid lubricated poor
®DX
Availability
To order:
Cylindrical bushes, cylindrical bushes with
oil hole, thrust washers, strips and special
parts - with or without pin indents
Features
Lead-free [Compliance with the European Parliament's End of Life Vehicles directive (ref:
2000/53/EC) on the elimination of hazardous
materials in the construction of passenger cars
and light trucks]
Excellent chemical resistance
Excellent erosion resistance
Good fatigue strength
Good wear performance
Can be broached for tighter tolerances
Usage
dry fair
oil lubricated very good
grease lubricated very good
water lubricated poor
process fluid lubricated fair
®DX 10
Cylindrical buhes Thrust washers
Strips
Thrust washers
Strips Special parts
Cylindrical bushes
Special parts
-
13
Possible Applications
Automotive:
Air conditioning compressors, gearbox and
transmissions, heavy duty struts and shock
absorbers, high performance pumps: axial
piston, radial piston, gear, vane, etc.
Industrial:
Compressors: scroll and reciprocating; pneu-
matic and hydraulic cylinders, high perfor-
mance pumps: axial piston, radial piston,
gear, vane, etc.
TMDP31
Metal polymer material
Steel + porous bronze sinter + PTFE +
fluoropolymer + fillers
sliding layerPTFE + fluoro-polymer + fillers
porous bronze sinter
steel backing
Bearing properties Units Value Maximum load p - static 250
MPa - dynamic 140
Maximum sliding speed v - oil lubricated m/s 10.0
Maximum pv factor - oil lubricated MPa x m/s 10.0
Maximum temperature T °C +280max Minimum temperature T °C - 200min
Coefficient of friction f - oil lubricated - 0.01 - 0.05
Shaft surface finish Ra m 0.05 - 0.4*
Shaft hardness HB >200 * depending on operating conditions
Possible Applications
Automotive:
Steering gear, power steering, pedal bushes,
seat slides, king-pin bushes, tailgate pivots,
brake caliper bushes, etc.
Industrial:
Mechanical handling and lifting equipment,
machine slides, hydraulic cylinders, hydraulic
motors, ski-lifts, pneumatic equipment, medi-
cal equipment, textile machinery, agricultural
equipment, scientific equipment, etc.
®DX
Metal-polymer material
Steel + porous bronze sinter + POM with
lubrication indents
sliding layer: acetalcopolymer, with orwithout lubricationindents. Machine-able on request.
bronze sinter
steel backing
Bearing properties Units Value Maximum load p - static 140
MPa - dynamic 70
Maximum sliding speed v - greased m/s 2.5
Maximum pv factor - greased MPa x m/s 2.8
Maximum temperature T °C +130max Minimum temperature T °C - 40min
Coefficient of friction f - greased - 0.06 - 0.12
Shaft surface finish Ra m 0.4
Shaft hardness - normal >200HB
- for service life >2000 hours >350
Possible Applications
General
Greased or oiled applications with high load,
high temperature, and contamination; ideal for
replacing Bi-metal or Bronze bushings to
achieve improved wear performance
Automotive:
Kingpins, oil pumps, suspension joints
Industrial:
Piston pumps, agriculture equipment, con-
struction, lift and cranes, small reciprocating
bushing
Metal-polymer material
Steel + porous bronze sinter + high tech
polymer
®DX 10
high tech polymer
bronze sinter
steel backing
Bearing properties Maximum load p - static 250
MPa - dynamic 140
Maximum sliding speed v - greased 2.5m/s
- oil lubricated 10.0
Maximum pv factor - greased MPa x m/s 2.8
Maximum temperature T °C +175max Minimum temperature T °C - 40min
Coefficient of friction f - greased - 0.01-0.10 - oil lubricated - 0.01-0.06
Shaft surface finish Ra m 0.4
Shaft hardness - normal > 200HB
- for service life > 2000 hours > 350
Units Value
-
Product Range
14
Cylindrical bushes Thrust washers
Strips
Availability
To order:
Cylindrical bushes, thrust washers, strip and
non-standard parts
Features
Marginally lubricated bearing material with
good wear resistance under thin lubrication
film conditions
For hydrodynamic applications also
available with plain sliding layer
Suitable for use with low viscosity fluids
Suitable for use at temperatures up to 250°C
Bearing polymer lining has good chemical
resistance
Usage
dry fair
oil lubricated good
grease lubricated very good
water lubricated good
process fluid lubricated good
®HI-EX
Availability
To order:
Cylindrical bushes, thrust washers, strip and
non-standard parts (all forms also available
with lubrication indents)
Features
Self-lubricating bearing material for operati-
on in mixed film lubrication conditions
Suitable for marginally lubricated and dry
operating conditions
The sliding layer is machinable (ca. 0.4 mm
above bronze sinter layer)
TM DS does not cause fretting corrosion
damage to the shaft under low amplitude
oscillating movements
® Performance is similar to DX but with lower
friction
Usage
dry good
oil lubricated very good
grease lubricated very good
water lubricated poor
process fluid lubricated poor
TMDS
Cylindrical bushes Flanged bushes
Thrust washers
Availability
Ex stock:
Cylindrical bushes and flanged bushes
To order:
Non-standard parts
Features
Injection moulded reinforced polyamide
6.6T based and modified bearing material
Good bearing performance in the range of
simple / medium working conditions
TM The EP standard programme is inter-
changeable with roll-formed bushes
according to ISO3547
Recommended tolerances for fitted bushes:
housing h7, shaft h7 - h9
Colour: black
Usage
®EP
dry good
oil lubricated good
grease lubricated good
water lubricated fair
good afterprocess fluid lubricated resistance testing
Cylindrical bushes Thrust washers
Strips Special parts
-
15
®HI-EX
Metal-polymer material
Steel + porous bronze sinter + PEEK +
PTFE + fillers
PEEK + PTFE+ fillers
porous bronzesinter
steel backing
Bearing properties Units Value Maximum load p - static 140
MPa - dynamic 100
Maximum sliding speed v - greased 2.5m/s
- oil lubricated 10.0
Maximum pv factor - greased MPa x m/s 2.8
Maximum temperature T °C +250max Minimum temperature T °C - 150min
Coefficient of friction f - greased / oil lubricated - 0.08-0.12 / 0.03-0.08
Shaft surface finish Ra m 0.4
Shaft hardness - normal >200HB
- for service life >2000 hours >350
Possible Applications
Automotive:
Diesel fuel pumps, gear pumps, ABS equip-
ment
Industrial:
Hydraulic motors and pumps, agricultural
equipment, wind energy equipment, yaw and
teeter bearings
Possible Applications
Automotive:
Steering gear, power steering, pedal bushes,
seat slides, king-pin bushes, tailgate pivots,
brake caliper bushes, etc.
Industrial:
Mechanical handling and lifting equipment, ma-
chine slides, hydraulic cylinders, hydraulic mo-
tors, ski-lifts, pneumatic equipment, medical
equipment, textile machinery, agricultural
equipment, scientific equipment, etc.
TMDS
Metal-polymer material
Steel + porous bronze sinter + POM
modified
Bearing properties Units Value Maximum load p - static 110
MPa - dynamic 45
Maximum sliding speed v - dry 1.5m/s
- greased / oil lubricated 2.5 / 10.0
Maximum pv factor - dry 1.4MPa x m/s
- greased / oil lubricated 2.8 / 10.0
Maximum temperature T °C +130max Minimum temperature T °C - 60min Coefficient of friction f - dry - 0.15 - 0.30 - greased / oil lubricated - 0.05-0.10 / 0.03-0.08
Shaft surface finish Ra m 0.4
Shaft hardness - normal >200HB
- for service life >2000 hours >350
POM + fillers
porous bronze
sinter
steel backing
Possible Applications
Generally applicable within the limits of the material properties.
Industrial:
Medical equipment, awnings and blinds,
scientific equipment, gaming equipment,
office equipment etc.
®EP
Solid polymer material
PA6.6T + PTFE + glass fibres + graphite
Injection mouldedthermoplasticdry bearing mate-rial with additiveshomogeneously mixed in
Bearing properties Units Value Maximum load p - static MPa 80
Maximum sliding speed v - dry m/s 1.0
- for A /A = 5 0.06H C Maximum pv factor* - for A /A = 10 MPa x m/s 0.24H C
- for A /A = 20 1.0 H C
Maximum temperature T °C +140max Minimum temperature T °C - 40min Coefficient of friction f - dry - 0.15 - 0.30
Shaft surface finish Ra m 0.5 ± 0.3
Shaft hardness HV >200 * the pv limit is depending on the heat dissipating surface to contact area ratio
-
Product Range
16
Features
Injection moulded reinforced polyphe-
nylensulfide based and modified bearing
material
Good chemical and hydrolysis resistance
Very low friction, optimised for dry running
conditions
High dimensional stability
Colour: brown
®EP 43
Cylindrical bushes Flanged bushes
Thrust washers Special parts
Availability
Ex stock:
Cylindrical bushes and flanged bushes
To order:
Non-standard parts
Usage
dry very good
oil lubricated good
grease lubricated good
water lubricated very good
good afterprocess fluid lubricated resistance testing
Cylindrical bushes Flanged bushes
Thrust washers Special parts
Availability
To order:
Bushes, special dimensions and shapes
Features
Injection moulded polyoxymethylene
based and modified bearing material
Colour: white
®EP 12
Usage
dry very good
oil lubricated good
grease lubricated good
water lubricated fair
good afterprocess fluid lubricated resistance testing
Cylindrical bushes Flanged bushes
Thrust washers Special parts
Features
Injection moulded polybutylenterephtalate
based and modified bearing material.
Good price/performance ratio
Colour: white
®EP 22Availability
Ex stock:
Cylindrical bushes and flanged bushes
To order:
Non-standard parts
Usage
dry very good
oil lubricated good
grease lubricated good
water lubricated very good
good afterprocess fluid lubricated resistance testing
-
17
®EP 12
Solid polymer material
POM + PTFE
Injection mouldedthermoplasticdry bearing mate-rial with additiveshomogeneously mixed inPossible Applications
Generally applicable within the limits of the material properties.
Industrial:
Domestic appliances, furniture, office equip-
ment, sports equipment and many more
Bearing properties Units Value Maximum load p - static MPa 65
Maximum sliding speed v - dry m/s 1.0
- for A /A = 5 0.04H C Maximum pv factor* - for A /A = 10 MPa x m/s 0.09H C
- for A /A = 20 0.18 H C
Maximum temperature T °C +125max Minimum temperature T °C - 40min Coefficient of friction f - dry - 0.18 - 0.30
Shaft surface finish Ra m 0.3 ± 0.2
Shaft hardness HV >200 * the pv limit is depending on the heat dissipating surface to contact area ratio
®EP 22
Solid polymer material
PBT + PTFE
Injection mouldedthermoplasticdry bearing mate-rial with additiveshomogeneously mixed in
Possible Applications
Generally applicable within the limits of the material properties.
Automotive:
Pedal bearings, steering columns, axles
Industrial
Domestic appliances, chemical equipment,
office equipment, sports equipment and many
more
Bearing properties Units Value Maximum load p - static MPa 50
Maximum sliding speed v - dry m/s 1.0
- for A /A = 5 0.05H C Maximum pv factor* - for A /A = 10 MPa x m/s 0.10H C
- for A /A = 20 0.20 H C
Maximum temperature T °C +170max Minimum temperature T °C - 50min Coefficient of friction f - dry - 0.22 - 0.37
Shaft surface finish Ra m 0.3 ± 0.2
Shaft hardness HV >200 * the pv limit is depending on the heat dissipating surface to contact area ratio
®EP 43
Solid polymer material
PPS + PTFE + Aramid
Injection mouldedthermoplasticdry bearing mate-rial with additiveshomogeneously mixed in
Possible Applications
Generally applicable within the limits of the material properties.
Industrial
Domestic appliances, materials handling
equipment, apparatus engineering, slot
machines and cash boxes, and many more
Bearing properties Units Value Maximum load p - static MPa 83
Maximum sliding speed v - dry m/s 1.0
- for A /A = 5 0.22H C Maximum pv factor* - for A /A = 10 MPa x m/s 0.90H C
- for A /A = 20 3.59 H C
Maximum temperature T °C +240max Minimum temperature T °C - 40min Coefficient of friction f - dry - 0.11 - 0.20
Shaft surface finish Ra m 0.5 ± 0.3
Shaft hardness HV >200 * the pv limit is depending on the heat dissipating surface to contact area ratio
-
Product Range
18
Features
Injection moulded reinforced polyether-
etherketone based and modified bearing
material
High temperature material with low thermal
expansion for demanding components
Good chemical and hydrolysis resistance
Excellent in lubricated applications
High viscosity and mechanical strength
High wear resistance in oscillating
movements
Colour: black
®EP 64
Special parts
Cylindrical bushes Flanged bushes
Thrust washers
Availability
To order:
Bushes, special dimensions and shapes
Usage
dry good
oil lubricated very good
grease lubricated very good
water lubricated good
good afterprocess fluid lubricated resistance testing
Features
Injection moulded reinforced polyetheret-
herketone based and modified bearing ma-
terial
High temperature material with low ther-
mal expansion for demanding compo-
nents
Optimized for dry running conditions
High viscosity and mechanical strength
High wear resistance in oscillating move-
ments
Good chemical and hydrolysis resistance
Colour: black
®EP 63
Cylindrical bushes Flanged bushes
Thrust washers
Availability
Ex stock:
Cylindrical bushes and flanged bushes
To order:
Non-standard parts
Usage
dry good
oil lubricated good
grease lubricated good
water lubricated fair
good afterprocess fluid lubricated resistance testing
Special parts
Features
Injection moulded reinforced polypheny-
lensulfide based and modified bearing
material
Good chemical and hydrolysis resistance
Excellent in lubricated applications
High dimensional stability
Colour: black
®EP 44
Cylindrical bushes Flanged bushes
Thrust washers
Availability
To order:
Bushes, special dimensions and shapes
Usage
dry good
oil lubricated very good
grease lubricated very good
water lubricated very good
good afterprocess fluid lubricated resistance testing
-
19
®EP 44
Solid polymer material
PPS + PTFE + carbon fibres
Possible Applications
Generally applicable within the limits of the material properties.
Industrial:
Domestic appliances, valve technology,
electronics assembly, apparatus engineering
and many more
Injection mouldedthermoplasticdry bearing mate-rial with additiveshomogeneously mixed in
Bearing properties Units Value Maximum load p - static MPa 95
Maximum sliding speed v - dry m/s 1.0
- for A /A = 5 0.11H C Maximum pv factor* - for A /A = 10 MPa x m/s 0.42H C
- for A /A = 20 1.69 H C
Maximum temperature T °C +240max Minimum temperature T °C - 40min Coefficient of friction f - dry - 0.16 - 0.26
Shaft surface finish Ra m 0.5 ± 0.3
Shaft hardness HV >450 * the pv limit is depending on the heat dissipating surface to contact area ratio
®EP 63
Solid polymer material
PEEK + PTFE + Aramid
Possible Applications
Generally applicable within the limits of the material properties.
Industrial:
Domestic appliances, valve technology,
electronics assembly, agricultural machinery
and many more
Injection mouldedthermoplasticdry bearing mate-rial with additiveshomogeneously mixed in
Bearing properties Units Value Maximum load p - static MPa 90
Maximum sliding speed v - dry m/s 1.0
- for A /A = 5 0.16H C Maximum pv factor* - for A /A = 10 MPa x m/s 0.66H C
- for A /A = 20 2.63 H C
Maximum temperature T °C +290max Minimum temperature T °C - 100min Coefficient of friction f - dry - 0.12 - 0.21
Shaft surface finish Ra m 0.3 ± 0.2
Shaft hardness HV >200 * the pv limit is depending on the heat dissipating surface to contact area ratio
®EP 64
Solid polymer material
PEEK + PTFE + graphite + carbon fibres
Possible Applications
Generally applicable within the limits of the material properties.
Industrial:
Domestic appliances, transportation equip-
ment, apparatus engineering, conveyor
equipment and many more
Injection mouldedthermoplasticdry bearing mate-rial with additiveshomogeneously mixed in
Bearing properties Units Value Maximum load p - static MPa 125
Maximum sliding speed v - dry m/s 1.0
- for A /A = 5 0.09H C Maximum pv factor* - for A /A = 10 MPa x m/s 0.35H C
- for A /A = 20 1.40 H C
Maximum temperature T °C +290max Minimum temperature T °C - 100min Coefficient of friction f - dry - 0.3 - 0.5
Shaft surface finish Ra m 0.3 ± 0.2
Shaft hardness HV >450 * the pv limit is depending on the heat dissipating surface to contact area ratio
-
Product Range
20
Features
Injection moulded polyamidimide based
and modified bearing material.
Irreversible cross-linked by thermal treat-
ment
High temperature material with low thermal
expansion for demanding components
High viscosity and mechanical strength
Good chemical resistance
High wear resistance in oscillating move-
ments
Colour: black
®EP 73
Special parts
Cylindrical bushes Flanged bushes
Thrust washers
Availability
To order:
Bushes, special dimensions and shapes
Usage
dry good
oil lubricated good
grease lubricated good
water lubricated fair
good afterprocess fluid lubricated resistance testing
Features
Injection moulded polyamidimide based
and modified bearing material
Irreversible cross-linked by thermal treat-
ment
High temperature material with low thermal
expansion for demanding components
High viscosity and mechanical strength
Good chemical resistance
High wear resistance in oscillating move-
ments
Colour: black
®EP 79
Special parts
Cylindrical bushes Flanged bushes
Thrust washers
Availability
To order:
Bushes, special dimensions and shapes
Usage
dry not suitable
oil lubricated very good
grease lubricated very good
water lubricated fair
good afterprocess fluid lubricated resistance testing
Thrust washers
Availability
Ex stock:
Thrust washers
Features
Suitable for light duty applications only
Suitable for use dry or oil grease lubrication
Prevents metal to metal contact between
assembly parts
TMGlacetal KA
Usage
dry fair
oil lubricated good
grease lubricated good
water lubricated fair
process fluid lubricated fair
-
21
®EP 73
Solid polymer material
PAI + graphite + PTFE
Possible Applications
Generally applicable within the limits of the material properties.
Automotive:
Automatic gears, pumps, sealing in turbo
compressors, piston rings, valve seats,
sealings
Industrial:
Continuous furnaces, drying furnaces for
coating, textile machines and many more
Other:
Aerospace: Weight saving by replacement of
aluminium or metal alloys, while providing
superior stability and viscosity.
Applicable in extreme high and low tempe-
ratures e.g. turbojet engine compressor
blade.
Injection mouldedthermoplasticdry bearing mate-rial consisting of PAI + graphite + PTFE
Bearing properties Units Value Maximum load p - static MPa 105
Maximum sliding speed v - dry 2.5m/s
- lubricated 5.0
- for A /A = 5 0.10H C Maximum pv factor* - for A /A = 10 MPa x m/s 0.39H C
- for A /A = 20 1.57 H C
Maximum temperature T °C +260max Minimum temperature T °C - 200min Coefficient of friction f - dry - 0.19 - 0.31
Shaft surface finish Ra m 0.5 ± 0.3
Shaft hardness HV >200
* the pv limit is depending on the heat dissipating surface to contact area ratio
®EP 79
Solid polymer material
PAI + carbon fibres + PTFE
Possible Applications
Generally applicable within the limits of the material properties.
Automotive:
Automatic gears
Industrial:
Domestic appliances, control valves, fittings,
textile machines and many more
Injection mouldedthermoplasticbearing materialwith additiveshomogeneously mixed in
Bearing properties Units Value Maximum load p - static MPa 130
Maximum sliding speed v - lubricated m/s 10
Maximum pv factor - lubricated MPa x m/s 10
Maximum temperature T °C +260max Minimum temperature T °C - 200min Coefficient of friction f - lubricated - 0.005 - 0.1
Shaft surface finish Ra m 0.5 ± 0.3
Shaft hardness HV >500
Possible Applications
Industrial:
Thrust washers are used as axial bearings in conjunction with all cylindrical bushes according to
ISO 3547 to prevent metal to metal contact and fretting damage
TMGlacetal KA
Solid polymer material
POM
Polyacetal-Copolymer
Bearing properties Units Value Maximum load p - static 20
MPa - dynamic 10
Maximum sliding speed v - greased m/s 1.5
Maximum pv factor - greased MPa x m/s 0.35
Max. temperature T °C +80max Minimum temperature T °C - 40min
Coefficient of friction f - greased - 0.08 - 0.12
Shaft surface finish Ra m 0.4
Shaft hardness - normal >200HB
- for service life >2000 hours >350
-
Product Range
22
Cylindrical bushes Flanged bushes
Special parts
Availability
To order:
Injection moulding allows for a diverse
range of shapes and sizes
Features
Low friction coefficient
Optimum performance under light-duty
conditions
Injection moulded dry bearing material
Manufactured by precision injection moul-
ding
TMMultilube
Usage
dry good
oil lubricated good
grease lubricated good
water lubricated fair
process fluid lubricated fair
Cylindrical bushes
Availability
Ex stock:
Cylindrical standard bushes partly available
To order:
Non-standard lengths (short-term), non-
standard wall thickness (on request)
Features
High load capacity
Excellent shock resistance
Excellent contamination resistance
Excellent misalignment resistance
Very good friction and wear properties
Good chemical resistance Usage
dry very good
oil lubricated fair
grease lubricated fair
water lubricated fair
process fluid lubricated poor
®GAR-MAX
Cylindrical bushes
Availability
To order:
Cylindrical standard bushes and special
parts, for material recommendations please
contact your local GGB representative
Features
High Static load capacity - twice as high as ®standard GAR-MAX
Excellent shock and misalignment resis-®tance - better than standard GAR-MAX
Excellent contamination resistance
Very good friction and wear properties
Good chemical resistance
Usage
dry very good
oil lubricated fair
grease lubricated fair
water lubricated fair
process fluid lubricated fair
TMHSG
-
23
Possible Applications
Industrial:
Linkages, seat suspensions
TMMultilube
Solid polymer material
Proprietary injection moulded engineering
thermoplastic
Injection mouldedthermoplasticdry bearing mate-rial with additiveshomogeneously mixed in
Bearing properties Units Value Maximum load p - static 60
MPa - dynamic 30
Maximum sliding speed v - dry m/s 1.5
Maximum pv factor - dry MPa x m/s 0.6
Maximium temperature T / T momentary °C +80 / +120max max Minimum temperature T °C - 40min
Coefficient of friction f - dry - 0.1 - 0.2
Shaft surface finish Ra m 0.2 - 0.8
Shaft hardness - normal >200HB
- for service life >2000 hours >350
Industrial:
Steering linkages, hydraulic cylinder pivots, king pin bearings, boom lifts, scissor lifts, cranes,
hoists, lift gates, backhoes, trenchers, skid steer loaders, front end loaders, etc.
sliding layer
backing
Filament wound materialSliding LayerContinuous wound PTFE and high-strength fibres encapsulated in an internally lubricated, high temperature filled epoxy resin.BackingContinuous wound fiberglass encapsu-lated in a high temperature epoxy resin.
®GAR-MAXBearing properties Units Value Maximum load p - static 210
MPa - dynamic 140
Maximum sliding speed v - dry m/s 0.13
Maximum pv factor - dry MPa x m/s 1.05
Maximium temperature T °C +160max Minimum temperature T °C - 195min
Coefficient of friction f - dry - 0.05 - 0.30
Shaft surface finish Ra* m 0.15 - 0.40
Shaft hardness* - normal >350HB
- for service life >2000 hours >480* Alternative shaft hardnesses and shaft surface finish is possible, depending on the application. Please contact your local GGB
representative.
Possible Applications
Possible Applications
Industrial:
Steering linkages, hydraulic cylinder pivots, king pin bearings, boom lifts, scissor lifts, cranes,
hoists, lift gates, backhoes, trenchers, skid steer loaders, front end loaders, etc.
TMHSG
sliding layer
backing
Filament wound material
Sliding LayerContinuous wound PTFE and high-strength fibres encapsulated in an internally lubri-cated, high temperature filled epoxy resinBackingContinuous wound fiberglass encapsu-lated in a high temperature epoxy resin
Bearing properties Units Value Maximum load p - static 415
MPa - dynamic 140
Maximum sliding speed v - dry m/s 0.13
Maximum pv factor - dry MPa x m/s 1.05
Maximium temperature T °C +160max Minimum temperature T °C - 195min
Coefficient of friction f - dry - 0.05 - 0.3
Shaft surface finish Ra* m 0.2 - 0.8
Shaft hardness* - normal >350HB
- for service life >2000 hours >480* Alternative shaft hardnesses and shaft surface finish is possible, depending on the application. Please contact your local GGB
representative.
-
Product Range
24
Cylindrical bushes Cylindrical bushes with steel sleeves
Availability
To order:
Cylindrical bushes, optionally available in a
steel outer shell
Features
Self-lubricating
High static load capabilitiy
Excellent tolerance to shock loading and
misalignment
Contamination resistant
Very good friction and wear properties
Good chemical resistance
Sealed to exclude contaminants, therefore
extended service life
No grease required
- therefore environmental friendly
- cost savings by elimination of automated grease system and grease
Usage
dry very good
oil lubricated fair
grease lubricated fair
water lubricated fair
process fluid lubricated fair
TM SBC Sealed Bearing Cartridges
Thrust washers
Availability
To order:
Thrust washers, standard dimensions from
12 x 24 mm to 75 x 115 mm and wall thick-
nesses 1.5 - 2.0 - 3.0 mm. Other dimensions
available on request, please contact your
local GGB representative.
Features
Excellent shock resistance
High load capacity
Excellent misalignment resistance
Excellent contamination resistance
Good surface speed capability
Very good friction and wear properties
Good chemical resistanceUsage
dry very good
oil lubricated fair
grease lubricated poor
water lubricated very good
process fluid lubricated fair
TMMEGALIFE XT
Cylindrical bushes
Availability
To order:
Cylindrical bushes
Features
High load capacity
Outside and inside diameters can be
machined
Good friction and wear properties under
slow speed oscillating movements
Good chemical resistance
Excellent resistance against contamination
Usage
dry very good
oil lubricated very good
grease lubricated fair
water lubricated fair
process fluid lubricated very good
®GAR-FIL
-
25
Possible Applications
Industrial:
Steering linkages, hydraulic cylinder pivots, king pin bearings, boom lifts, scissor lifts, cranes,
hoists, lift gates, backhoes, trenchers, skid steer loaders, front end loaders, etc.
Filament wound material with sealing
SBC bearings are available with GAR-MAX
and HSG and are sealed to exclude con-
taminants. SBC are optionally available
with a steel outer shell.
TM SBC Sealed Bearing Cartridges
Bearing properties Units Value GAR-MAX Value HSG Maximum load p - static 210 415
MPa - dynamc 140 140
Maximum sliding speed v - dry m/s 0.13 0.13
Maximum pv factor - dry MPa x m/s 1.05 1.05 Seal temperature limits - continuous +93 °C - intermittent - 104 Shaft surface finish Ra m 0.15 - 0.40 0.2 - 0.8
Shaft hardness - normal >350 >350
HB - for service life >2000 hours >480 >480
Possible Applications
Industrial:
Pulley spacers, gear spacers, aerial lifts, fork lift masts, king pins, steering links, lift gates, cranes,
backhoes, valve actuator linkages, etc.
sliding layer
core
Filament wound material
Sliding layer
Proprietary filled PTFE tape liner on both
sides
Core
Continuously woven layer of filament glass
fibre encapsulated in a high temperature
epoxy resin
TMMEGALIFE XTBearing properties Units Value Maximum load p - static 140
MPa - dynamic 140
Maximum sliding speed v - dry m/s 0.5
Maximum pv factor - dry MPa x m/s 1.23
Maximium temperature T °C +175max Minimum temperature T °C - 195min
Coefficient of friction f - dry - 0.02 - 0.12
Shaft surface finish Ra* m 0.4
Shaft hardness* HB >200* Alternative shaft hardnesses and shaft surface finish is possible, depending on the application. Please contact your local GGB
representative.
Possible Applications
Industrial:
Toggle linkages, earthmoving equipment, valves
®GAR-FIL
sliding layer
backing
Filament wound materialSliding LayerProprietary filled PTFE tape liner, 0.38 mm (0.015 inch) standard thickness, 0.76 mm (0.03 inch) on requestBacking
Continuous wound fiberglass encapsulated
in a high temperature epoxy resin
Bearing properties Units Value Maximum load p - static 140
MPa - dynamic 140
Maximum sliding speed v - dry m/s 2.5
Maximum pv factor - dry MPa x m/s 1.23
Maximium temperature T °C +205max Minimum temperature T °C - 195min
Coefficient of friction f - dry - 0.02 - 0.12
Shaft surface finish Ra* m 0.4
Shaft hardness* HB >200* Alternative shaft hardnesses and shaft surface finish is possible, depending on the application. Please contact your local GGB
representative.
-
Product Range
26
Cylindrical bushes
Availability
To order:
Cylindrical bearings: ID Range: 12 to 150 mm,
special order bearing diameters to 500 mm,
flanged bearings, non-standard parts
Features
Value engineered filament wound bearing
for lighter duty applications
High load capacity
Good misalignment resistance
Excellent shock resistance
Good friction and wear properties
Good chemical resistance
Usage
dry very good
oil lubricated good
grease lubricated poor
water lubricated fair
process fluid lubricated fair
TMMLG
Cylindrical bushes
Availability
To order:
Cylindrical bearings up to 500 mm
Features
Specifically developed for hydropower
applications
High load capacity
Excellent shock and edge loading capacity
Low friction, superior wear rating and
bearing life
Excellent corrosion resistance
Dimensional stability low water absorption,
no swelling
Environmentally friendly
Usage
dry very good
oil lubricated fair
grease lubricated poor
water lubricated very good
process fluid lubricated fair
TMHPM
Strips
Availability
To order:
Cylindrical bearings diameters up to 500 mm
(20 inches); plates in standard thicknesses of
6, 8 and 10 mm (0.24 - 0.3 and 0.39 inch)
Features
Specifically developed for hydropower
applications
High load capacity
Excellent shock and edge loading capacity
Low friction, superior wear rating and
bearing life
Excellent corrosion resistance
Dimensional stability low water absorption,
no swelling
Environmentally friendly
Usage
dry very good
oil lubricated very good
grease lubricated poor
water lubricated very good
process fluid lubricated good
TMHPF
-
27
Possible Applications
Industrial:
Construction and earth moving equipment, conveyers, cranes, hoists, hydraulic cylinder pivots,
etc.
TMMLG
Filament wound material
Sliding layer verbiage
Continuous wound PTFE and high-
strength fibers encapsulated in high
temperature epoxy resin
Backing verbiage
Continuous wound fiberglass encapsu-
lated in high temperature epoxy resin
Bearing properties Units Value Maximum load p - static 210
MPa - dynamic 140
Maximum sliding speed v - dry m/s 0.13
Maximum pv factor - dry MPa x m/s 1.05
Maximium temperature T °C +160max Minimum temperature T °C - 195min
Coefficient of friction f - dry - 0.05 - 0.12
Shaft surface finish Ra* m 0.4
Shaft hardness* HB >350* Alternative shaft hardnesses and shaft surface finish is possible, depending on the application. Please contact your local GGB
representative.
sliding layer
backing
Possible Applications
Industrial:Servo-motor bearings, operating ring sliding segments, linkage bearings, wicket gate bearings,
guide vane bearings, intake gate sliding segments, intake gate roller bearings, spillway gate
bearings, trash rate bearings, fish screen bearings, trunnion bearings, blade bearings, injector
bearings, deflector bearings, ball and butterfly trunnion bearings, etc.
TMHPM
Filament wound material
Sliding layer
Continuous wound PTFE and high-
strength fibers encapsulated in a self-
lubricating, high temperature epoxy resin
Backing
Continuous wound fiberglass encapsu-
lated in a high temperature epoxy resin
Backing
Sliding layer
Bearing properties Units Value Maximum load p - static 140
MPa - dynamic 140
Maximum sliding speed v - dry m/s 0.13
Maximum pv factor - dry MPa x m/s 1.23
Maximium temperature T °C +160max Minimum temperature T °C - 195min
Coefficient of friction f - dry - 0.05 - 0.3
Shaft surface finish Ra* m 0.2 - 0.8
Shaft hardness* - normal >350HB
- for service life >2000 hours >480* Alternative shaft hardnesses and shaft surface finish is possible, depending on the application. Please contact your local GGB
representative.
Possible Applications
Industrial:
Servo-motor bearings, operating ring sliding segments, linkage bearings, wicket gate bearings,
guide vane bearings, intake gate sliding segments, intake gate roller bearings, spillway gate
bearings, trash rate bearings, fish screen bearings, trunnion bearings, blade bearings, injector
bearings, deflector bearings, ball and butterfly trunnion bearings, etc.
TMHPF
Filament wound material
Sliding layer
Proprietary filled PTFE tape liner
Backing
Continuous woven fiberglass cloth laminate
impregnated and cured with epoxy resin
backing
sliding layer
Bearing properties Units Value Maximum load p - static 140
MPa - dynamic 140
Maximum sliding speed v - dry m/s 2.5
Maximum pv factor - dry MPa x m/s 1.23
Maximium temperature T °C +140max Minimum temperature T °C - 195min
Coefficient of friction f - dry 0.02 - 0.12-
- lubricated 0.02 - 0.08
Shaft surface finish Ra* m 0.15 - 0.40
Shaft hardness* - normal >350HB
- for service life >2000 hours >480* Alternative shaft hardnesses and shaft surface finish is possible, depending on the application. Please contact your local GGB
representative.
-
Product Range
28
Tape
Availability
Ex stock:
Tape with 0.38 to 3.2 mm thickness and 305
mm width
Features
Vibration-reducing
Superior sliding bearing material which can
be easily bonded to any clean, rigid
substrateUsage
dry very good
oil lubricated very good
grease lubricated very good
water lubricated good
process fluid lubricated good
TMMultifil
Availability
To order:
Cylindrical bushes, flanged bushes, thrust
washers, self-aligning bearings, sliding plates
and special parts
Features
Maintenance-free bearing material for
heavy duty applications
Excellent performance under high loads
and intermittent operation
Graphite-free with solid lubricants
Long life time due to lower wear rate of solid
lubricants compared to graphite
Also available with graphite inserts for
temperatures >250°C
Usage
dry good
oil lubricated good
grease lubricated good
water lubricated good
process fluid lubricated fair
TMDB
Cylindrical bushes Flanged bushes
Thrust washers Self-aligning bearings
Slide plates
Bushing block Thrust plate
Availability
To order:
Customer design size and special shapes
Features
Bearing housing with very good friction and
wear performance
Pre-installed GGB plain bearings
Bearing Blocksand Thrust Plates
-
29
Possible Applications
Industrial:
Machine tool ways, gibs and other sliding applications
TMMultifil
Filament wound material
PTFE + Proprietary filler system
filled with PTFE
Bearing properties Units Value Maximum load p - static 70
MPa - dynamic 35
Maximum sliding speed v - dry m/s 2.5
Maximum pv factor - dry 0.32MPa x m/s
- lubricated 1.25
Maximium temperature T °C +280max Minimum temperature T °C - 200min
Coefficient of friction f - dry 0.07-
- lubricated 0.05
Shaft surface finish Ra m 0.2 - 0.4
Shaft hardness - normal HB >200
Possible Applications
Industrial:
Offshore industry, underwater equipment, bridges and civil engineering, iron and steel industry
equipment, cranes and conveyors, deep and open cast mining equipment, construction and
earthmoving equipment etc.
TMDB
Monometal material
Cast bronze + solid lubricant inserts
1
2
3
1 Sliding surface with running-in film2 Solid lubricant insert3 Support (bronze)
Bearing properties Units Value Maximum load p - static 200
MPa - dynamic 100
Maximum sliding speed v - dry m/s 0.5
Maximum pv factor, dry MPa x m/s 1.5
Maximum temperature T °C +350max Minimum temperature T °C - 50min
Coefficient of friction f - dry - 0.05 - 0.18
Shaft surface finish Ra m 0.2 - 0.8
Shaft hardness HB >200
Possible Applications
Industrial and Automotive:
External gear pumps and motors
Housing material:
Aluminium alloy
Assembled bearings:
see table below
3 - 4 % 3 - 3.5 %Sn 3 - 4 % 4.2 - 4.6 %Cu
-
Product Range
30
Availability
Ex Stock:
Cylindrical and flanged bushes in a variety of
dimensions
To order:
Non-standard parts
Features
Maintenance-free bearing for general engi-
neering applications
Optimum performance under relatively
light loads and high speeds
Produced by powder metallurgy process
and therefore suitable for complex shapes
Wide range of parts available from stockUsage
Flanged bushes good
dry (oil impregnated)
good (additionaloil lubricated
oil impregnation)
grease lubricated fair
water lubricated not suitable
process fluid lubricated not suitable
Sintered Bronze
Cylindrical bushes
Availability
To order:
Bearings with and without flange, spherical
bearing, bearings with and without cleaning
grooves, sliding plates, special bearings
Features
TM GGB-CSM is a powder metallurgical
bearing material consisting of a solid lubri-
cant (graphite, MoS ) homogeneously dis-2tributed in a metallic matrix (bronze, iron or
nickel)
By forming a solid lubricant film during the TMrelative motion, GGB-CSM bearing mate-
rials are self-lubricating and maintenance-
free
TM GGB-CSM bearing materials have a high
load capacity
Corrosion resistant alloys are available
Temperature ranges up to 600 °C are
possible (depending on the alloy)
TM GGB-CSM bearing materials are machi-
nable
Lead free alloys are available
TMGGB-CSM
Bearing Flanged bearing
Special plate Spherical bearing
Availability
To order:
Bearings with and without lubrication
indents, bearings with and without cleaning
grooves, segment rings, sliding plates,
special bearings
Features
TM GGB-CBM is a thin walled, powder metall-
urgical bimetal bearing material consisting
of a self-lubricating, maintenance free
sliding layer
The sliding layer is sintered on metallic
backing (stainless steel, carbon steel or
bronze)
The sliding layer contains a homoge-
neously distributed solid lubricant
(graphite)
TM GGB-CBM bearing materials have a high
load capacity
TM GGB-CBM bearing materials can be used
in temperature ranges from -150 °C up to
+280 °C
TM GGB-CBM bearing materials are
machinable
Lead free alloys are available
TMGGB-CBM
Bearing Segment ring
Special bearingSliding plate
-
31
Possible Applications
Industrial:
FHP motor bearings, domestic appliances and hand tools
Sintered Bronze
Monometal material
Bronze sinter impregnated with oil, similar
to SINT A 50, impregnation group 1
BP25:8 to 10.5% Snothers 350
Possible Applications
Industrial:
General mechanical engineering, applications with elevated temperatures and corrosion risk,
exhaust or smoke flaps, valves, turbines, iron foundry, steel and aluminium industry, furnaces,
blower, steel works and civil engineering, turbines (water, steam and gas), pumps and compres-
sors, sewage purification plants, thermal treatment furnaces, hot rollingmills, food and beverage
industry, packaging equipment, agriculture and construction machines, handling equipment,
tyre molds, etc.
TMGGB-CSM
Monometallic material
Powder metallurgical bearing material
Bearing properties Units Value Maximum load p - static 100 - 260
MPa - dynamic 55 - 130
Maximum sliding speed v m/s 0,2 - 0,5
Maximum pv factor - dry MPa x m/s 0,8 - 1,5
Maximum temperature T °C +600max Minimum temperature T °C - 200min
Coefficient of friction f - dry 0,11 - 0,5-
- wet 0,08 - 0,18
Shaft surface finish Ra m 0,2 - 0,8
Shaft hardness HB / HRC >180 HB / >45 HRC
Solid lubricant:graphite, MoS2
Metallic matrixBronze-, Ni-, orFe-basis
Applications
Industrial:
General mechanical engineering, applications at high loads, iron foundry, steel and aluminium
industry, furnaces, blower, steel works, food and beverage industry, packaging equipment,
agriculture and construction machines, handling equipment, tyre molds, etc.
TMGGB-CBM
Bimetal material
Thin walled, powder metallurgical bimetal
bearing material
Solid lubricant:graphite
Metallic matrixbronze basis
Metallic backing:stainless steel,carbon steel orbronze
Bearing properties Units Value Maximum load p - static 260 - 320
MPa - dynamic 80 - 150
Maximum sliding speed v m/s 0,3 - 0,5
Maximum pv factor - dry MPa x m/s 0,5 - 1,0
Maximum temperature T °C +280max Minimum temperature T °C - 150min
Coefficient of friction f - dry 0,1 - 0,2-
- wet 0,1 - 0,15
Shaft surface finish Ra m 0,2 - 0,8
Shaft hardness HB 180 - 250
-
Product Range
32
Cylindrical bushes
TMSP AvailabilityTo order:
Cylindrical bushes and special parts
Features
For lubricated applications with plain sliding
layer
Suitable for oil and grease lubrication
The bush ID can be machined by boring,
reaming, broaching or calibrating
Usage
dry poor
oil lubricated good
grease lubricated good
water lubricated poor
process fluid lubricated poor
Availability
To order:
Cylindrical bushes, flanged bushes, special
parts according to DIN ISO or customer
design, special alloys available
Features
Conventional bearing material for lubri-
cated applications in general engineering
Suitable for oil or grease lubrication
Usage
dry not suitable
oil lubricated good
grease lubricated good
water lubricated not suitable
process fluid lubricated not suitable
Cylindrical bushes
Machined BronzeBearingsaccording to ISO 4379
Availability
To order:
Cylindrical bushes, thrust washers, strip and
special parts; special alloys available
Features
Steel-lead-bronze-compound with indents
as reservoir for the grease
High load capacity, very good resistance to
fatigue strength at higher temperatures
Applicable in rough operation conditions
Particularly suitable for high specific loads
with oscillating motion and low frequency
Fine turned shaft suitable
Usage
dry poor
oil lubricated good
grease lubricated very good
water lubricated poor
process fluid lubricated poor
Cylindrical bushes Thrust washers
Strips
TMSY
-
33
Possible Applications
Industrial:
Mechanical handling and lifting equipment, machine slides, hydraulic cylinders, hydraulic
motors, pneumatic equipment, medical equipment, textile machinery, agricultural equipment,
etc.
TMSP
Bimetal material
Steel-lead-bronze-compound material
St + CuPb26Sn2
steel backing
stannous, lead, bronze alloy composition consistent of:appr. 72% Cu 26% Pb 2% Sn
CuPb26Sn2
Bearing properties Units Value Maximum load p - static 250
MPa - dynamic 120
Maximum sliding speed v - greased m/s 2.5
Maximum pv factor - greased MPa x m/s 2.8
Max. temperature T - greased /oil lubricated °C +150 / +250max Minimum temperature T °C - 50min
Coefficient of friction f - greased /oil lubricated - 0.05-0.12 / 0.04-0.12
Shaft surface finish Ra m 0.4
Shaft hardness - normal >200HB
- for service life >2000 hours >350
Possible Applications
Industrial:
Mechanical handling and lifting equipment, general and special engineering, agricultural
equipment, textile machinery, automotive engineering, etc.CuSn12
Monometal material
Bearings made of copper alloys
Machined BronzeBearingsaccording to ISO 4379
Bearing properties Units Value Maximum load p - static 200
MPa - dynamic 100
Maximum sliding speed v - greased m/s 2.5
Maximum pv factor - greased MPa x m/s 2.8
Maximum temperature T °C +140max Minimum temperature T °C - 40min
Coefficient of friction f - greased - 0.09 - 0.15
Shaft surface finish Ra m 0.2 - 0.8
Shaft hardness HB >350
Possible Applications
Industrial:
Mechanical handling and lifting equipment, hydraulic cylinders, agricultural equipment, off
highway equipment etc.
TMSY
Bimetall material
Steel-lead-bronze-compound material
St + CuPb10Sn10 with indents
steel backing
stannous, lead, bronze alloy composition consistent of:appr. 80% Cu 10% Pb 10% Sn
CuPb10Sn10
Bearing properties Units Value Maximum load p - static 300
MPa - dynamic 140
Maximum sliding speed v - greased m/s 2.5
Maximum pv factor - greased MPa x m/s 2.8
Max. temperature T - greased /oil lubricated °C +150 / +250max Minimum temperature T °C - 40min
Coefficient of friction f - greased /oil lubricated - 0.05-0.12 / 0.04-0.12
Shaft surface finish Ra m 0.8
Shaft hardness - normal >200HB
- for service life >2000 hours >350
-
Product Range
34
Availability
Order-related production
Features
Adjusting bearing for misalignment equa-
lisation
All-purpose as flange or pedestal bearing,
suitable for high loads
Self-aligning spheric avoids edge load to
the bearing
Adjustable up to ±5°
Spheric is secured against distortion
Depending on choice of housing, spherics
and bearings, simple to most demanding
bearing solutions are possible
For optimum design solutions, various
bearings from the GGB product programme
are applicable
TMMINI Self-aligningBearing Housings
Availability
Order-related production
Features
Adjusting bearing for misalignment equa-
lisation
All-purpose as flange or pedestal bearing,
suitable for high loads
Self-aligning spheric avoids edge load to
the bearing
Adjustable up to ±5°
Spheric is secured against distortion
Depending on choice of housing, spherics
and bearings, simple to most demanding
bearing solutions are possible
For optimum design solutions, various
bearings from the GGB product programme
are applicable
PB pedestal bearing housing
FL flange bearing housing
DF flange bearing housing
TMEXALIGN Self-align-ing Bearing Housings
TMUNI Self-aligningBearing Housings
Availability
Order-related production
Features
Adjusting bearing for misalignment equa-
lisation
All-purpose as flange or pedestal bearing,
suitable for high loads
Self-aligning spheric avoids edge load to
the bearing
Adjustable up to ±5°
Spheric is secured against distortion
Depending on choice of housing, spherics
and bearings, simple to most demanding
bearing solutions are possible
For optimum design solutions, various
bearings from the GGB product programme
are applicable
-
35
TMMINI Self-aligningBearing Housings
Load limit values for radial forces
Bush IDSizemax. pressure
load [N] (housing)max. tensile
load [N] (bolt)maximum shear off
load [N] (bolt)
8 - 15 10000 5000 5000
The permissible loads for MINI bearings housings are defined by the housing stability or the strength of the fixing screws (6 mm diameter), depending on the load direction.
0
Housing material: AlMgSi12
Ball material: 9SMn28K
Stainless and other materials possiblePossible Applications
Industrial:
Wind energy plants, car washes, cleaning machines, drum systems, bevelling equipment,
handling systems, conveyor belts (pulleys), printing machines, heating and ventilation
equipment, hoists, cranes, textile machinery, special machine engineering, bakery equipment,
marine equipment
Possible Applications
Industrial:
Wind energy plants, car washes, cleaning machines, drum systems, bevelling equipment,
handling systems, conveyor belts (pulleys), printing machines, heating and ventilation
equipment, hoists, cranes, textile machinery, special machine engineering, bakery equipment,