All Rooftop entry/exit points must be protected. The DynaRound Hatch Guard provides a non-penetrating, affordable solution. With easy setup, our hatch protection system can be used for both temporary and permanent solutions. The adjustable, self-closing gate prevents accidental entrance.

The DynaRound Hatch Guard is designed to install quickly. The unique snap in place rails allow typical installation in less than 60 minutes with 2 people.

The DynaRound Hatch Guard mounts directly to the roof hatch with a compression fit design. No drilling necessary means rooftop water integrity is not compromised. Multiple sizes are available to fit almost any hatch. Yellow or gray FRP posts and guardrails with galvanized fittings and self closing gate ensure a long service life.

Width adjustable to allow for hatch size variations.

Unique compression fit design. No drilling!

Self-closing gate prevents accidental entry.

Rugged hinges allow gate tension adjustment.

SPECIFICATIONSBenefits

• Fast Installation• Rugged Design• Compression Fit• No Cutting or Drilling• Self-Closing Gate• FRP Posts and Rails• No Roof Penetration• Adjustable - Fits Nearly Any Roof Hatch• Custom Configurations Available

Measurements

• Rail Heights - Top Rail Height: 42” - Mid Rail Height: 20”

• Multiple Sizes Available - 30-36" x 30-54" - 42-48" x 42-60" - 30-36" x 96-114"

• Custom Sizes Available

Safety Ratings

• Meets OSHA Requirements: - 1926.501(b)(4) - 1926.502(b)(12)(13) - 1910.28(b) - 1910.29(b) - CAL/OSHA 3212

• Meets IBC 2015 Requirements: -1015.7 -1607.8.1

-1015.3 -1015.4.4

-1607.8.1.1 -1607.8.1.2

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

ISO9001-2008

QU

A

L ITY CERTIFIED

FA C I L I T I E S©Fibergrate Composite Structures Inc. 2018

Fibergrate Composite Structures Inc. • High Performance Composite Solutions Since 1966

YEARS50CELEBRATING

DynaRound Hatch Guard

ADDITIONAL ROOF SAFETY SOLUTIONS by Fibergrate

This non-penetrating single tie-off anchor is designed for use on roofs (single ply, BUR, concrete, and Modified Bitumen membranes) with up to a 5 degree slope. It provides fall arrest for one person and meets OSHA regulation: 1926.502(d). This corrosion resistant system can be used on a variety of roof surfaces in wet or dry conditions, and its modular design allows for mobility and easy assembly.

DYNAWEIGHT FALL PROTECTION SYSTEM

CORVEX® MOLDED GRATING WITH RUBBER FEETFibergrate FRP corrosion resistant molded grating with the our unique Corvex resin system is corrosion resistant, lightweight, easy to install, and slip resistant. Specially designed rubber feet can be added to molded grating, elevating it 1/2” above the surface, offering an economical raised walkway solution.

CROSSOVERSFibergrate’s crossovers are available in a variety of heights that address most standard clearances creating a cost-effective walkover solution for tanks, pipes or other obstructions. These FRP pre-engineered platforms create a safe working environment, are lightweight and easy to install. Fibergrate offers both stair crossovers and ship stair crossovers which have a steeper angle of climb.

FRP DYNARAIL® SAFETY LADDERSThe Dynarail ladder line includes FRP ladders, standard walk-thrus, and safety cages. Combining corrosion resistance, long life and low maintenance, Dynarail ladders are superior to conventional metallic systems. Components are lightweight and easy to fabricate which saves on installation labor and equipment.

DYNAROUND HATCH GUARDThis fixed hatch railing system provides permanent means of fall protection for roof hatch openings. This design meets and exceeds OSHA fall protection regulations, and its self-closing and latching gate feature ensures that the opening is protected at all times. The non-penetrating attachment attaches directly to the roof hatch cap flashing, and this solution fits all brands of roof hatches with cap flashing.

STAIR SOLUTIONSFibertred® slip molded FRP stair treads can be used for both new or replacement steps. Treads are engineered to exceed OSHA and other model building code standards for safety, strength, durability and corrosion resistance. Fiberplate® stair tread covers are a convenient way to provide solid, slip resistant footing for existing wood, concrete, metal or FRP treads that are still structurally sound.

DYNAROUND WARNING LINESThis premium, folding warning line system provides visual warning of at-risk areas and meets OSHA regulation 1926.502(f )(2). The standard system includes three folding bases and 100 feet of flags. An optional transport cart allows for portability and storage (holds up to 9 folding warning line systems), and rubber feet attachments for the bases are also available.

DYNAROUND RG™ (ROOF GUARD)Fibergrate’s ballasted rooftop guardrail system is designed for safety and fall protection on roof top applications. Each system is made of durable, weather-resistant fiberglass reinforced plastic (FRP) composite uprights and non-FRP counterbalance weights and connector components. This system meets applicable safety standards in the U.S. and Canada to protect people working at heights.

Fibergrate Composite Structures Inc. believes the information contained here to be true and accurate. Fibergrate makes no warranty, expressed or implied based on this literature and assumes no responsibility for consequential or incidental damages in the use of these products and systems described, including any warranty of merchantability or fitness. Information contained here is for evaluation only. ©Fibergrate Inc. 2018-06/07-DynaRound-Hatch-Gaurd.PDF

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

YEARS50CELEBRATING

info@fibergrate.comwww.fibergrate.comPhone: 972-250-1633 Fax: 972-250-1530