Fuzhou Fang Yuan Electric Co., Ltdf02.s.alicdn.com/kf/HTB1NfGrFVXXXXcyXVXX.PRXFXXXC.pdf · 2019. 7....
Transcript of Fuzhou Fang Yuan Electric Co., Ltdf02.s.alicdn.com/kf/HTB1NfGrFVXXXXcyXVXX.PRXFXXXC.pdf · 2019. 7....
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Fuzhou Fang Yuan Electric Co., Ltd
Company Profile
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Contents
Brief Introduction ..................................................................................................................................... 3
Our main products: ................................................................................................................... 4
Feature of our products : .......................................................................................................... 5
Status of Fuzhou Fangyuan Electrical Machinery Co., Ltd. .................................................... 7
Annual Capacity of The Company ........................................................................................................... 7
Experiences List of Hydroelectric Generating Sets ................................................................................. 8
Design Ability and Condition................................................................................................................. 12
Quality Control ...................................................................................................................................... 13
Quality Information Feedback Network Chart of Fuzhou Fangyuan Electrical Machinery Co., Ltd. ... 16
Technological Management and Level of Fuzhou Fangyuan Electrical Machinery Co., Ltd. ............... 18
Testing Laboratory ................................................................................................................................. 19
Technical Service ................................................................................................................................... 20
Technical Support For Cooperation/Assurance Period of The Units ..................................................... 21
Introduction to Finishing and Testing Equipment .................................................................................. 21
List of Main Production Equipment ....................................................................................... 22
List of Some Testing Devices ................................................................................................. 23
Brief description of large-size generator's testing device ....................................................................... 25
Lawsuits in Recent 3 Years .................................................................................................................... 25
Modernized Management Actions of Our Company ............................................................................. 26
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Brief Introduction
Fuzhou Fangyuan Electrical Co., Ltd.
is a limited enterprise established in
Minhou Economic and
Technological Development Zone,
Fuzhou ,Fujian, China, which is a
large high and new technical
enterprise to research, design and
manufacture hydro-turbine generator
and AC/DC motor. It covers 40,000
square meters and has more than 200
employees including more than 75
seniors and middle class specialized technicians. The company has the right of direct
exporting and importing.
We have over 100 various kinds of
equipment including 18 large,
precious and rare ones and have total
fixed assets of RMB 37,000,000.
Main products of enterprises include:
various types of turbine generator,
auxiliary set for power station and
electric control equipments,
hydraulic metal structure, AC/DC
generator.
We adheres to the operation principle: “grasp
the rules, achieve radius (Fangyuan)” strictly
excute the quality policy of of ” Exploiting
Innovation, Good Faith Principle, Scientific
Management, Continuous Improvement”.
We establish good quality guarantee system and
perfect the organizational structure
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Our main products:
Hydroelectric Generating Set:
Generator :
Seat No.:423---3250;
Single-machine capacity: 50KW-10MW(Single-machine capacity of low voltage: 1250
KW )
Pole number:4-60;
Voltage:400V-10,500V
Type : vertical, horizontal, with hydraulic thrust, without hydraulic thrust
Turbine
Diameter of runner:600-2500mm, Speed:100--1500r/min, suitable for all head ,flow,
and the output power is under 25mw.
Type: vertical, horizontal, two pivot, four pivot, and hole installation.
Distribution Panel
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
1. High and low voltage brushless exciting
2. thyristor excitation
3. type: Single/double channel ,micro-computer controlled, dry type excitation
transformer
Feature of our products :
1. brushless excitation system match all of our generator set .our coaxial excitation
brushless system with high-voltage and low-speed is civil initiate.
2. Installation structure of two pivot for small output power generator set is civil
initiate in the hydroelectric industry.
3. Brushless AC exciter use high quality permanent magnet materials as the remanence
magnetism, to ensure in the situation of long term no using the generators or and
others have sufficient remanence voltage to excite rotor without magnetization again.
4. All rotor must pass the test of high precision dynamic balance before finished ,which
in order to reduce the vibration, and extend the service life of bearings.
5. Way of eoxy vacuum dipping , with F insulation class, for stead function ,heat
dissipation and the proof of humidity, water , heat .
6. Main products purchase sentinelly, Strictly execute the ISO9001 quality standard
system, to make sure the quality perfect and steady.
.
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
At present, enterprise has capacity of manufacturing single unit 10MW water turbine
generator and producing electrical equipments above 300MW each year.
In the line:
A. obtain ISO9001 Quality Assurance System certificate (in 2000)
B. obtain “High-Tech Enterprise Certificate” issued by the office of Science and
Technology (in 2005)
C. obtain 4 items of proprietary intellectual property rights.
These ensure ours to be the technology-driven product in the market .We continue to
make the scientific research into productive forces; And produce the quality generator set,
satisfy the needs of the users, serve the society. Our products not only enjoy fast sales in
civil and overseas market, but also high reputation.
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Status of Fuzhou Fangyuan Electrical Machinery Co., Ltd.
Name of
Company
Fuzhou Fangyuan
Electrical Machinery Co.,
Ltd.
Date of
Establishment July of 2013
Registered
Address Fuzhou,Fujian Zip Code 350100
Telephone 0086-591-22917530 Fax 0086-591-22918669
Name Positioin Title
The Board Chen Jianping Chairman Senior Engineer
Chief
Executive Chen Junyuan
General
Manager Senior Engineer
Technical
principal Xu Yunguo Chief Engineer Senior Engineer
Deposit Bank
Name Industrial and Commercial Bank of China Fuzhou City
Branch
Account
Number 1402 0301 1960 1051 729
Main
business
Main business: water & air turbine generator and related auxiliary
equipments, motor, mental structure piece manufacture, sale, whole set;
hydro-generator erection, deal with exporting business for machine
products, whole set equipments and related techniques.
Annual Capacity of The Company
Name and Address of Company Items Being
Produced
Annual Producing
Capability
Fuzhou Fangyuan Electrical
Machinery Co., Ltd.
Minhou, Fuzhou, Fujian Province
Hydro-generating
units 10MW
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Experiences List of Hydroelectric Generating Sets
No. Station Address
Qty * Unit
Output
(KW)
Turbine Generator
1 Lianhe Guangning,Guangzho
u 3*630 HL295-WJ-90S SFW630-16P/1730
2 Jinjiang River
hydropower company Jiangle,Fujian 2*630 HL295-WJ-92S SFW630-16P/1730
3 Wuhe Yuexi,Anhui 2*1250 HL295-WJ84 SFW1250-8P/1180
4 Jinxi hydropower company Jingning,Zhejiang 2*2000 HL295-WJ-84 SFW2000-8P/1730
5 Requhe Changdu,Xizang 2*1250 HL270-WJ90S SFW1250-12P/1430
6 Hehui Hezheng,Gansu 3*500 HL270-WJ-84 SFW500-14P/1180
7 Gansu Linqun Zhouqu,Gansu 1*5000 HL150-WJ-84 SFW5000-6/1730
8 Kunlong hydropower
company Pishan,Xijiang 2*1600 HL270-WJ-84
SFW1600-1OP/173
0
9 Longxiang hydropower
company Ningshan,Shanxi 2*2000 HL270-WJ-80 SFW2000-8P/1730
10 Jiangziding Luzhou,Sichuan 2*3200 HL160/D46-WJ-84 SFW3200-8/1730
11 Quwa First Step Zhouqu,Gansu 3*1000 HL240-WJ(LJ)-84 SFW630-16/1730
12 New Earth company Ltd. Guangcang,Guangxi 1*2200+1*160
0 HL160/D46-WJ-84 SFW2200-8/1730
13 Santai Rucheng,Hunan 1*630 HL295-WJ-71s SFW630-1OP/1430
14 Doucheng Jiangnig,Fujian 3*1250 ZDT03-LH-225 SF1250-32/2860
15 Shuibei Company Ltd. Yihuang,Jiangxi 5*400 ZDK400-LH-180 SF400-32/2600
16 Beituan,Liancheng Liancheng,Fujian 1*1000 HL295-LJZ-91 SF1000-14/2150
17 Changfufa hydropower
company Funing,Yunnan 3*630 ZDT03-LH-180 SF630-22/2150
18 Jiaocheng Litouban Ningde,Fujian 2*320 ZDT03-LH-160 SFK320-24/1730
19 Longshan Jiyuan Nanjing,Jiangsu 2*630 ZD560-LH-120 SF630-14/1730
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
20 Jiufeng Chengkeng Pinghe,Fujian 1*630 HL295-LJZ-77 SF630-12/1730
21 Tianjin Tianjing 1*450 ZDJP502-LMY-120 SFZ450-20/1730
22 Panxi Jianjiang,Fujian 3*320 ZDT03-LH-160 SF320-28/1730
23 Junping Shaoyang,Hunan 2*160 ZDT03-LH-160 SF160-32/1730
24 Changbo hydropower
Machinary Company Ltd. Youxi,Fujian 5*200 ZDT03-LH-140 SF200-28/1730
25 Egong Town Shiyou Dingnan,Jiangxi 1*1000 ZDT03-LH-225 SFZ1000-12/1730
26 Huangjin Town
Jingmao First Longcheng,Guangxi 4*800 HL295-LJZ-77 SF800-12/1430
27 Mingdong hydro
Fuan Mingdong Fuan,Fujian 2*8000 ZDJP502-LH-300 SF8000-8/2600
28 Zhouning Town Longxi Ningde,Fujian 3*2500 HL160/D46-LJ-100 SFW2500-10/2150
29 Chongqing Chongqing,Sichuan 2*2500 CJA475-W-130/2X13
.5 SFW2500-14/1730
30 Longpu Town Zangkou Xinjiang 4*320 ZDT03-LH-160 SFJ320-24/1730
31 Shimeng Hanzhong,Shanxi 1*1600 HLC453-WJ-73 SFW1600-8/1430
32 Tongzheng hydropower
company Yongchun,Fujian 1*1600 HL820-WJ-71 SFWB1600-8/1430
33 Yudou Town Gehoulin Yongchun,Fujian 1*1000 HL820-LJ-100 SFW1000-16/1730
34 Taqiao Fuqing,Fujian 1*800 HL160-WJ-71 SFW800-10/1430
35 Zamao Bahou Huangnan,Qinghai 3*2500 HLA743-WJ-102 SFW2500-12/1730
36 Huibaoling Shandong 1*1250
1*800 ZD560-LH-180 SF1250-24/2600
37 Shekou Yanxia Fuan,Fujian 3*630 ZDT03-LH-180 SF630-24/1730
38 Lintouban Ningde,Fujian 4*320 ZDT03-LH-160 SF320-24/1730
39 Chongqing Generator
Company Ltd. Chongqing,Sichuan 1*260 Self supply JL260-36/856
40 Shuilinghe Shuizu,Guizhou 2*500 Self supply SFW500-6/990
41 Linhai Generator
Company Ltd. Linhai,Zhejiang 2*630 Self supply SFW630-6/990
42 Linhai Generator
Company Ltd. Linhai,Zhejiang 1*400 Self supply SFW400-6/850
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
43 Chongqing Generator
Company Ltd. Chongqing,Sichuan 2*180 Self supply JL180-18/488
44 Linhai Generator Company
Ltd. Linhai,Zhejiang 2*200 Self supply SFWB200-10/850
45 Jianyang hydropower
company Jianyang,Fujian 1*800 ZDJP502-LH-160 SF800-24/2600
46 Purna Mini-Project India 1x560 ZZ560-LJ-100 SF500-12/1180
47 BELKHU KHOLA Nepal 1x260 HLA575C-LJZ-45 SFZ260-6/740
48 Kuala Lumpur Malaysia 2*1000 XJA-W-80/1X18 SFW1000-12/1430
49 Nepal Nepal 1*3200 HL820-LJ-100 SFW3200-12/2600
50 Malaysia Malaysia 2*1000 XJA-W-63/1X14 SFW1000-8/1430
51 Peru Peru 1*1000 HL180/A194-LJ-100 SF1000-14/2150
52 Nepal Nepal 1*2500 XJA-W-70B/1X16.5 SFW2500-8/1730
53 Gloria Geradora
de Energia Ltd Brazil 2x500 HLD54-WJ-50 SFW500-6/990
54 Gloria Geradora
de Energia Ltd Brazil 6x500 HLA153-WJ-50 SFW500-8/990
55 Nepal Nepal 2*2500 ZDJP502-LH-200 SF3200-24/2840
56 Aulaukis Ltd Lithuania 1x100 GDD-008-WZ-70 SFW100-10
57 Nigeria Nigeria 3x1000 buyer supply SFW1000-10/1430
58 Nigeria Nigeria 3x1600 buyer supply SFW1600-14/1730
59 Nigeria Nigeria 3x1000 HL180/A194-WJ-60
A SFW1000-6/1180
60 Burna Burna 1x550 HLD46-WJ-50 SFW550-6/990
61 Kampuchea Kampuchea 2*5000 HLA153-WJ-84 SFW5000-8/1730
62 Malaysia Malaysia 2*1250 ZDJP502-LH-160 SFW1250-24/1260
63 Nepal Nepal 2*2500 XJA-W-80/1X18 SFW2500-8/1730
64 NAWATI Nepal 2x2000 HL820-LJ-100 SFW2000-12/1730
65 Orochi Monte Italy 2x720 ZDJP502-LH-160 SFW720-10/1430
66 Nepal Nepal 2*2500 ZDJP502-LH-160 SF4000-16/2840
app:ds:Nepalapp:ds:Nepalapp:ds:Nepalapp:ds:Nepalapp:ds:Nepalapp:ds:Nepalapp:ds:Nepalapp:ds:Nepalapp:ds:Nepalapp:ds:Nepal
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
67 Kampuchea Kampuchea 2*2500 XJA-W-80/1X18 SFW2500-8/1730
68 Malaysia Malaysia 2*1000 XJE-W-Z63A/1X13 SFW1000-8/1180
69 Brusson Italy 2x800 HL820-WJ-60 SFW800-8/1430
70 Burna Burna 2x100 ZD560-LMY-60 SFW100-6/590
71 Nepal Nepal 2*2500 ZDJP502-LH-200 SF2500-28/2840
72 Salad Yue State Malaysia 1x100 ZD760-LMY-80 SFW100-6/590
73 Salad Yue State Malaysia 1x250 ZD560-LMY-60 SFW250-6/740
74 German German 1x550 HL295-WJA-60 SFW550-6/990
75 Nepal Nepal 2*1000 XJE-W-Z63A/1X12.5 SFW1000-8/1180
76 T & A Ltd France 1x180 buyer supply SFW180-16/1180
77 T & A Ltd France 1x280 buyer supply SFW280-16/1180
78 T & A Ltd France 1x350 buyer supply SFW350-16/1180
79 Cambodia Source Plant Cambodia 4x400 ZDN616-LMY-140 SF400-22/1730
80 Lewiston Power Plant Armenia 2X1100 HLA551C-LJ-108 SFS1100-12/2150
83 Peru Peru 1*1950 HL295-WJ-84 SFW1950-8P/1730
84 Seattle USA 1*7000 buyer supply SF7000-22/3250
85 Seattle USA 1*5000 buyer supply SF5000-28/3250
app:ds:Nepalapp:ds:Nepalapp:ds:Nepalapp:ds:Nepal
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Design Ability and Condition
At present, the company has developed and designed more than 1,000 steam & water
turbine generating sets for more than 700 power stations. The power stations locate in
more than 20 provinces and 10 countries abroad. All the units operate reliably and safely.
During 20 years , the science & technology team have accumulated much experience on
developing, manufacturing, erection of generating equipment, and they have very strong
developing ability. Now our company has 120 designing engineers equipped with
advanced CAD hardware system and software system with strong functions. Our
company has established a perfect products information system through E-mail system
and Web-site system set in CAD network to
guarantee good communication among different
departments. On the base of AutoCAD products
design system, all the design for products and
edition for documents are finished by computer.
We also carry out computer analysis on rotary
parts of generating equipment by the aid of
Pro/Engineer software system made in America,
to check the pre-assembling of products which
can not be performed during the period of manufacture and evaluate the performance of
the products. Then the problems can be solved during the period of design. With these
software, our technical development ability and design ability have been improved, the
reliability of products have been improved, the design cost has been reduced, the design
period has been shorten.
Through the efforts of all the technicians, we have formed our characteristic and strong
competition on development of products as following:
a. Tubular, axial-flow and Francis turbine generating sets at low head and low speed
b. Pelton and Francis turbine generating sets at high head and high speed
c. Brush-less excitation system and special type of units
Facts have proved products of our company lies on the heading position in generating
industry. What we do is to make our customer satisfied.
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Quality Control
System of Quality Assurance of Sichuan Dongfeng Electric Machinery Works Co., Ltd
System of quality assurance of our company was ensured by Vouching Technical
Inspection Ltd. in 1996 and passed for the first time, so our company attains the
assurance of GB/T19001 idt ISO9001 (see the accessory)
For ensuring the products’ quality, our company continuously strengthens inner
management, improves the workers’ quality, operates according to COMPANY’S
HANDBOOK OF QUALITY and quality system of ISO9001 programs, besides
depending on strong technology and quality appliances. Company’s design, purchase,
product and manufacture are operated in control. We assure users to offer quality and
safe products and better services.
A. Quality assurance bureau
Our company has complete 3 systems of quality management, and quality department to
ensure quality. It has the right for veto, and it is in charge of organizing checking and
supervising. Each year our company makes quality policy, products’ excelled plan,
quality improving plan, quality examining plan and so on. Our company takes active in
quality management, important components are tackled key problem, and takes active in
products’ quality action, and the each operation quality control. Company deals with
inner and outer quality information, operates all-quality education, and has plan to
develop the workers’ education, continuously improves products’ quality.
Our company makes competitive on-the-spot management system by constantly
examining. The positional management of the products’ manufacture process comes into
being, so better ensures the products’ quality.
Our company has complete examining management system, quality, management,
technology and check belong to the examination of monthly economic duty. Dealing of
the quality accident operates according to system of quality management and system of
quality examination and publishing of the quality accident operates according to
PUBLISHING ITEMS OF ANTI-RULES.
B. Quality assurance of design
In the course of new product’s design, our company pays much attention to the quality
management of design stage from start, according to all kinds of standards made by
company, designs and checks in stage and ensures the user’s orders for products to occur
in the products’ design documents.
Designer work is in 3 stages according to product’s complexity and the amount of
producing. For large product, important product and large amount product, we use 3
stages design-primary design, technology design and construction design. During the
course of design, we use new construction and new material assured by experiment and
continuously completed the design in scientific methods.
Our company’s all new products pass the design examination according to reliability,
applicability, endurance, economy, safety and so on.
After manufactured according to orders, the products accept design examination by the
users, academy and authority besides examined by our company.
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Quality assurance of product’s improvement design
For the machinery in manufacturing and operating, periodical and non-periodical visiting
system is set in our company. The operational conditions of Users are fed back. And the
information that is good to the installation, operation and maintenance is used for the
normal design procedure, and operating by necessary tests and selected points.
C. Quality assurance of drawings and technology documents management
Technology files and information department is in charge of the management of drawings
and technology documents, and builds a set of complete management systems of
technology documents files. For adapting to the character that there are many kinds of
products in our company, the department makes definite managing methods for copying,
offering to other departments, lending, changing and settling of drawings and technology
documents. It also makes the records of the products manufactures process and
experiment and which departments to hand out.
D. Quality assurance of the management of physics-chemistry
For ensuring the measurement work of our company, we make a set of management
systems, compile yearly measurement work plan early in the year, and timely examine
the work quality of the workers. We ensure the measurement work quality by rewards
and penalty.
a. Certification assurance of the measurement workers
Our company carries out the cultivate system of the workers of measurement,
physics-chemistry and examining. They must be certified by superior measurement
bureau, and have the right to operate with attaining the certification.
b. Examination of measurement appliances
The measurement appliances purchased are carried out examination system. After
examined, they are compiled together and checked in, attached to “pass”, “sheet of
measurement appliances exchange”, and filled in “record card” for examination,
otherwise they needn’t be used. We timely examine the measurement appliances used in
the company, and decide the examination circle according to the quality, using frequency,
measured objects, importance and maintenance. There is a measurement check station in
each production branch, so as to ensure the accurate use of measurement appliance.
c. physics-chemistry experiment
In order to ensure the inner quality and liability of products, we build the departments of
chemistry parts analysis, mechanical properties testing, metal-graphic analysis,
non-destructive flaw detection, micro-magnetic and insulating performance testing, for
the material, cast steel rough, part-product and product of sealing and thermal processed.
We carry out the GB, JB, and the standard of technology documents. All experiment data
should be record in the ruled examination sheets, thus ensure the clarity, completion,,
accuracy of check contents, and the check records are filed to be examined for long time.
E. Quality assurance of product manufacture
a. Quality control of material
The plan, purchase, check, maintain, supply of material are based on the plan of product
and technology preparation and scientific technology research and the collection of
market quality information. The quality measurement department takes charge of
carrying out the work that the important component material is supplied by which
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
company an answered by the general-engineer office. The supply department takes
charge of supplying with material, casting, and outsourcing fittings. They are checked
with the quality certification and physics-chemistry check report by the quality
department workers after coming into the company. And the workers recheck the
appearance, the dimensions, physics-chemistry character according to correlative
standard and technology documents. After rechecking which material checks out, we can
place it alone. And the checker hands out the information sheet to inform the supply
department to do the work for exit or reuse. In special, we permit that the quality material
can take the place of the bad material, that the large one can take the place of few one,
but must hand out the replacement sheet agreed by technology department.
b. Quality control of operating program
Operation of the course of product manufacture, usage of appliances and check methods
are based on the technology documents of product, main products of our company are
compiled with product character, standard of importance grade and standard of seriority
grade of defect. For high quality, important operating program of large amount of product,
we set a lot of operating program quality control points. Our company set 178 operating
program quality control points for 12 products, and solids the product manufacture
quality operating program quality’s check and Qcactions.
In the course of product manufacture, operator must execute the rules such as “3
according to”, “3 self”, “3 check”. There are 17 special check station to check for the
input of material, component’s operation, installment of part-product and product and
packing. All the check records must fill in the record sheets to prepare to be checked.
There are 6 experimental stations for all kinds of electronic-motor, and our company has
the capability for the experiment of single 0.05MW.
c. Done-check and departure certification
Products after manufactured must be done-checked. Main products must be rechecked in
the spot by the leaders of quality department and designer. All the reports of experiment
and check are complete and can get the design demand. All necessary quality documents
are complete, so the leader of quality department can sign the departure certification. The
products can be sent by product department (or stored).
Normal products can be signed the departure certification by the leader of check station
after rechecked.
Our company makes the management system for non-passed products. The non-passed
products found in “self check” and “special check” are firstly separated, and we make the
signs on the components, at the same time, fill in the quality process sheet, hand in
correlative departments to deal with. These products can be used after processed by the
departments of design, technology and quality. While these products can’t be used.
Checker hands out the waste product sheet and informs the company to transfer the
products to the ordered place for waste product.
F Attached Diagram for Management and Quality Assurance System
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Quality Information Feedback Network Chart of Fuzhou
Fangyuan Electrical Machinery Co., Ltd.
Information after treated
Feedback & Transmission
Relevant factory and dept.
Quality Information briefing per season
Quality & Measure Dept.
Verify its effect
Bring forward countermeasure
Obligation Dept.
Feedback & Transmission
Standardization
Carry out countermeasure
General Manager and Engineer
Quality & Measure Dept.
Information Center
Hold Quality Attemper
Meeting Per Month
Collect Quality
Information
Each F
acto
ry
Qu
alit
y &
Me
asu
re D
ep
t.
Ea
ch
De
pa
rtm
en
t
各
部室
E
Customer Service Dept. Customer’s Opinion for Steam & Water Turbine Generating Sets
Sales Service Dept Collect Quality
Information
Classfied Clean up
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd v
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Treat idea for exterior
information
Quality attemper
meeting
Fill in information
feedback bill
Fill in information
feedback bill
Information
record
Send out information
counter measure list
Relate department Abnormal information
Quality plan
attemper
User 's
information
Fill in locale counter measure list
Fill in locale feedback list Information record and treat
Abnormal infromatin
Bring into branch factory's
quality plan
Operation party
Relate workshop section
Abnormal information Procedure post
Locale feedback list
Science and technology quality department,
quality information central of works
General Manager & Chief Engineer
Information
record
Fill in information
counter measure list
Marketing service departmental
Relate party
Treatment idea
feedback
Works quality
information:
Raw materials,
purchased part,
cooperation part
inspect, examine and
verify of work
process, examine and
verify product
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Technological Management and Level of Fuzhou Fangyuan
Electrical Machinery Co., Ltd.
Under the leadership of the Director and chief Engineer, according to the properties of
product structure of generating equipment of Dongfeng, our works puts the
technological of centralized management of “two main products”. Into practice, and
insists on integrating centralized management and operation by different levels
(branches), and establish and form the Dongfeng characteristic technological
management system of “united leadership, centralized management and operation by
different levels together”. Brief properties of specific work are followed:
After being transferred from military industry, The works, making use of the
advantages of military industry, centers on the generating equipment market, integrate
our own product structure, pay much attention to technological and technological
development, raise technological level, settle key technological problems. In recent
years, it use and spread new equipment, new technology, new materials on
development of new products, and self-design and self-install 6 motor test station, and
install 10T dynamic balance machine, and add 5m vertical lathe, 10m vertical lathe,
(200floor borer, and finish 36 numerical display coordinates. And all of these make
our machining ability and technological level on a higher step. To the aspect of new
technology, is spreads and applies welding technology of carbon dioxide gas and VSR
technology, settles many technological and production problems of welding of water
turbine and hydraulic generating set, and settles chromium plating with an area of
almost 200 square cun and is praised by users and foreign merchants.
The works pays much attention to technological staff and their study and training, for
example, some of them were sent to Chongqing University and Xian Jiaotong
University and other works of the same trade to take a refresher course, and let new
technology guide the production and establish a group of advanced technological
staff.
To increase the market competitiveness of generating equipment of our works, it pays
much attention to collecting international and national information, carries much work
of technology and its management standards, such as working it out, training and
publicizing, to assure our technology’s standardization and unity and continuity.
Altogether, the main property of our technology is one word “strictness”.
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Testing Laboratory
Our company has special measure & physics-chemistry department. This department
is separate into number of group, therein, the mechanical measuring group and the
electrical insulation group specially responding for characteristic testing of major
parts to insure quality of products.
For mechanical characteristic measuring, our company has special measuring and
testing equipment, and has the ability to check and test major mechanics characteristic
of ferrous metal and nonferrous metal (including tensile strength, yield strength,
extensibility, percentage reduction of area, impact value, hardness and others). Our
company also has the ability to analysis chemical components of material. At same
time our company can perform metallurgical analysis for materials to confirm internal
compose.
For electrical characteristic testing, our company has high-voltage withstand
equipment, high-voltage surge instrument, intermediate frequency power source and
large capacity DC power source, and has ability to according to standard to check and
test different electric characteristic. During single coil manufacture, we can perform
testing and measuring items including turn-to turn voltage withstand test, corona test,
dielectric loss test and increment test, AC voltage withstand (to earth) and others; after
assembling, we can perform DC voltage withstand test, leakage current measuring,
complete unit voltage withstand test (to earth) and corona test. All tests are performed
according to national standard.
Our company has large capacity generator testing station, can perform whole unit
rotation test of horizontal and middle and small capacity vertical hydro-generator
(including thermal generator) to examine the mechanical and electrical characteristic
of generator unit.
Because of the excellence performance of us, our company has been appraised to
“national first stage measure unit” at 1989. The certificate please sees “Qualification
Certificate of our company”.
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Technical Service
(1)Aim for after-sales service of our company is “The quality is the first, the user is
the first.” We obey the contract and supply the users with quality and satisfied
products, and carry out long-life service at the technology, material, preparation and
fittings, and execute the service sprit of “Large thing doesn’t pass one night, little
thing doesn’t the duty”. Therefore, our company specially sets the department of user
service for user to install the machinery, debug, fix, and deal with the accident. It also
educates the operator for user and sets the files of users’ quality and deals with the
information from users in time with “24-hour service spirit”. During the course of
installation, debugging, running-in, our company will send 1 to 2 experienced service
delegate to live at the workplace and help to install. They will deal with correlative
problems in time. They can make users satisfy.
(2)Organization system for after-sales service
1) Establish after-sales service system, which consists of After-Sales Service
Department, Technical Development Department, Power Equipment Installation
Department and other relevant departments. Chief Engineer will take charge of the
system.
2) Set up around-the-clock service hot line, i.e. (0833) 3250898. We will
solve the problems or answer the questions on technology and quality within 24
hours.
3) Visit the customers in the power stations to collect feed-back information
in time. For example, for the quality problem to be solved, it shall be had a special
meeting and put forward reasonable scheme in order to improve our product quality
and establish friendly mutual cooperation foundation.
(3)Actively push foreseeability service and life-long service
1)After the power station is put into operation, the required spare parts will
be supplied with preferential price. And we will guarantee and supply the spare parts
in time.
2)Our company will send experienced technicians to the site, who will
assist to install and dealt with the customer opinions. If the customer is not satisfied,
the service technician shall not leave the site.
3)According to actual project schedule, Project Managing Department of
our company will adjust production plan in time to meet the requirement of timely
delivery.
(4)At-site service
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Our company will send experienced technicians and supply at-site service and
instructions in the full process of installation and equipment commissioning.
Technical Support For Cooperation/Assurance Period of
The Units
Our company will run true to form supply technical support to the User whether the
unit operating at any period; Our company will supply free consultation service and
call service for use life of the Unit. The spare parts supply will be favorable.
Introduction to Finishing and Testing Equipment
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
List of Main Production Equipment
In recent years, our company has invested
large amount of money in building new
workshops of 6,000 square meters and
adding large equipment, such as an NC
dual-column 15m vertical lathe made in
France, 16m horizontal lathe made by
Qiqiha’er Machine Tool Works, φ220 NC
dual-column floor borer made in Russia,
12m horizontal lathe made by Qinghai
Heavy-duty Machine Tool Works,
100T/20T cranes to meet the demand of
manufacturing large electro-mechanical
products.
At present, our company can manufacture
hydro-generating units with single capacity
of up to 150MW, and with runner diameter
of up to 8.5m.
List of Main Production Equipment
No Name of Equipment Model Place of Producer
1 double column vertical lathe CQ5240-H2.6Y1.25 Anhui,
2 double column vertical lathe C5225-H Anhui,
3 Vertical lathe C5116 Dalian, Liaoning
4 Horizontal lathe CQW61120C Fuzhou, Fujian
5 Horizontal lathe CQW61120C Fuzhou, Fujian
6 Simple columnar end milling machine X3312/4M Jianxi
7 Universal knee-type
milling machine XA6140A Beijing
8 Universal radial milling
machine N5 Fujian
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
9 Hard support balance machine YYW-5000 Shanghai
10 Radial drilling machine Z3080*25 Zhong Jie
11 vertical driller Z5150 Dangdong,Shangdong
12 boring mill T611A Hangchuan,Hubei
13 M7130Hsurface grinder M7130H Hangzhou,Zhejian
14 Open type fixed press JD21-160T Jiangshu
15 Roll press in open type JG23-80A Fuzhou, Fujian
16 Hydraulic swing beam
guillotine shears QC12Y-6*2500 Anhui,
17 Four-column hydraulic press 100T Yangzhou,Jiangshu
18 Four-column hydraulic press 80T Yangzhou,Jiangshu
19 Hard support balance machine YYW-5000 Shanghai
20 Acuum macerate
drying equipment FNH-5000 Zhangjia
21 Between the winding circles
of impulse voltage test bench RZJ-30F Shanghai
22 Pressure test equipment 100KVA/35KV Wuhan,Hubei
23 Intelligent dc low resistance
instrument facilities RDC2512-I Shanghai
List of Some Testing Devices
No. Name of Device Model Place of Producer
1 Withstand voltage test
rig TNC-1Y Tianjin, China
2 Withstand voltage test
rig 60-52 Tianjin, China
3 High-potential test
breakdown device CY2672 Changzhou, China
4 Moisture & thermal
testing device 2# Leshan, China
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
No. Name of Device Model Place of Producer
5 Dynamic balancer YYW-10000 10T Shanghai, China
6 Hydraulic testing
device HF8 40Kg/cm Leshan, China
7 Water pressure testing
device HF26 120kg/cm Leshan, China
8 Material testing device WE-60 60T Jinan, China
9 Magnetic-particle
detector DZ-9000 Shanghai, China
10 X-ray detector 2515 Xi’an, China
11 Tree-meter measuring
device 741-11 3m Germany
12 Hardness tester HL-d Beijing, China
13
Digital
frequency-conversion
gauge
H3321 Shantou, China
14 Digital complicated
meter
1081 1/1million
(accuracy) Great Britain
15 Large-size projecting
gauge JTT600-B2 φ600 Beijing, China
16 Universal tool
microscope OPTO Germany
17 Laser measuring gauge JD100-1 Shanghai, China
18 Ultrasonic detector USD15X Germany
19 Infrared C.S analyzer C.S868 Deyang
20
Transformer for
working frequency
resonance test
GXZ-500/50 Hubei
21 Ultrasonic detector CTS-22B Shantou
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Brief description of large-size generator's testing
device
Power-supply unit
Maximum capacity of frequency-conversion unit
Synchronous alternator: 2250KVA
DC alternator: 1000KVA
Driven motor
DC driven motor: 500kW (3000-3600r/min)
Asynchronous motor: 800KVA (3000-3600r/min)
Dynamic balance testing device
Model: VIBROPORT41 (made by Germany Schenck Company)
Lawsuits in Recent 3 Years
We perform all of our contracts strictly according to the national contract law and the
specified articles of the Contracts, and with good faith. And all the economic
controversies are well settled and our company has been highly praised. In recent
years there are not any lawsuits against the company.
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
Modernized Management Actions of Our Company
A Project responsibility system
Before contracting a project, a Project Team will be established which
Electro-Mechanical Sales Company is responsible for, and take charge of pre-project
planning and relevant coordination and prepare the preliminary work carefully.
After awarding the contract, a Project Division will be established which its task
includes organization, arrangement, coordination for the unit’s design, procurement of
purchasing parts, quality inspection, manufacture, equipment delivery and after-sales
service. The contract will be successfully carried out and the project can be completed
with high efficiency and high quality.
B Quality assurance
In 1996, our company gained the ISO9000 Certificate and was the only enterprise that
gained the title of National Grade-One Metering Enterprise. We will perform our
contract strictly according to ISO9000. We choose the best national suppliers for
materials, shaft forgings and forgings. And strict inspections and physical and
chemical inspection reports will be made before the materials and forgings are sent
into workshop. And during production, each process is strictly controlled for quality.
Before delivery from the workshop, all the parts must be pre-assembled, adjusted and
corrected. Trucking is adopted for the small parts, precise parts and important parts.
Theft protection is made for both road transport and railroad transport.
C Design guarantee
We have cooperated with some International Companies, such as Hitachi, Andritz for
a long time. All the design for parts will be simulated and analyzed with FEM on
computers to verify the reliability and reasonability and advancement; all the parts to
be pre-assembled will be done before delivery to guarantee high-quality and efficient
operation.
D Service promise
Aim for after-sales service of our company is “The quality is the first, the user is the
first.” We obey the contract and supply the users with quality and satisfied products,
and carry out long-life service at the technology, material, preparation and fittings,
and execute the service sprit of “Large thing doesn’t pass one night, little thing
doesn’t the duty”. Therefore, our company specially sets the department of user
service for user to install the machinery, debug, fix, and deal with the accident. It also
educates the operator for user and sets the files of users’ quality and deals with the
-
Fang Yuan No Rules, No FangYuan Fuzhou Fang Yuan Electric Co., Ltd
Address: 2nd Phase, Minhou Economic & Technological Development - Zone, Fuzhou, China Fax: (86)0591-22918669 Tel:(86)0591-22918668/(86)13067393503/(852)62776170
information from users in time with “24-hour service spirit”. During the course of
installation, debugging, running-in, our company will send 1 to 2 experienced service
delegate to live at the workplace and help to install. They will deal with correlative
problems in time. They can make users satisfy.
Our company will send our representatives to field to guide and assist the Plant for
installation and commission without any extra expenses.
After operation of the plant, our company will provide all the spare parts at favorable
price for a long time for the Plant.
At suitable time, joint meeting of three parties will be hold to settle all the problems
occurred in technology, production and installation. Dealing results will be submitted
to your company and the design institute in time. And the minutes of meetings will be
appendices of the Contract.
E High-quality & Strive-to-be-the-best system
After award of the contract, the company carries out “high-quality &
strive-to-be-the-best system” for ensuring the quality during the whole process of
design, manufacture and after-sales service. A series of reward system can increase
the responsibility of employees, effectively improve the enthusiasm.
F Recruitment system
For the important working posts, such as management, sales, design and
manufacture, the company insists on recruitment system. The staff in important post
can receive a certain subsidy to mobilize their aggressiveness and realize the principle
of “more pay for more work”.
G Implement “Three Projects”
Under the leadership of new corporate system, “Three Projects” System is determined
and includes the following:
Finest project: Ex-works ratio of first-quality and best-quality products
should reach 90 percent and 50 percent respectively.
High-quality project: it will be carried from the beginning to the end of the
contract execution.
User-satisfaction project: User satisfaction is the aim of our company, and
“24-hour service” will meet different needs of the customers.