Futures trading is not suitable for all investors, and involves the … · 2017-05-10 · Futures...

Futures trading is not suitable for all investors, and involves the risk of loss. Futures are a leveraged investment, and because only a percentage of a contract’s value is required to trade, it is possible to lose more than the amount of money deposited for a futures position. Therefore, traders should only use funds that they can afford to lose without affecting their lifestyles. And only a portion of those funds should be devoted to any one trade because they cannot expect to profit on every trade. All references to options refer to options on futures. CME Group is a trademark of CME Group Inc. The Globe Logo, CME, Chicago Mercantile Exchange, Globex, iLink, E-mini, CME EOS Trader, Galax-C, FirmSoft, CME DataSuite, and CME DataMine are trademarks of Chicago Mercantile Exchange Inc. New York Mercantile Exchange, NYMEX, miNY, and ClearPort are registered trademarks of the New York Mercantile Exchange, Inc. COMEX is a trademark of Commodity Exchange, Inc. FIX™ and FAST™ are trademarks of FIX Protocol Limited. FIX/FASTsm is a service mark of FIX Protocol Limited. Dow Jonessm, Dow Jones AIG Commodity Indexsm, The Dowsm, Dow Jones Industrial Averagesm, and DJIAsm are service marks of Dow Jones & Company, Inc. and American International Group, Inc. (AIG) and have been licensed for use for certain purposes by the Board of Trade of the City of Chicago, Inc (CBOT®). CBOT futures and options on futures contracts based on the Dow Jones Industrial Averagesm are not sponsored, endorsed, sold or promoted by Dow Jonessm, and Dow Jonessm makes no representation regarding the advisability of trading such product(s). BM&FBOVESPA™ is a trademark of BM&FBOVESPA, KRX™ is a trademark of Korea Exchange, DME™ is a trademark of Dubai Mercantile Exchange, BMD™ is a trademark of Bursa Malaysia, BMV™ is a trademark of Bolsa Mexicana De Valores. All other trademarks are the property of their respective owners. The information within this document has been compiled by CME Group for general purposes only. CME Group assumes no responsibility for any errors or omissions. Additionally, all examples in this brochure are hypothetical situations, used for explanation purposes only, and should not be considered investment advice or the results of actual market experience. All matters pertaining to rules and specifications herein are made subject to and are superseded by official CME, CBOT, and NYMEX rules. Current rules should be consulted in all cases concerning contract specifications. Copyright © 2010 CME Group Inc. All rights reserved.

FIXML Trade API

1.0 Trade Capture Report Acknowledgement Message The Trade Capture Report Acknowledgement Message is used by a Central Clearing Counterparty (CCP) to acknowledge receipt of a Trade Capture Report. Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group

TrdCaptRptAck

571 TradeReportID RptID String Identifies the specific trade report being sent. Trade Report ID can be globally unique or unique per message type.

1189E4EAA80

572 Trade ReportRefID

RptRefID String Used to echo back the TradeReportID of the TradeCaptureReport being acknowledged.

REPORTIDREF123

1003 TradeID TrdID String Trade ID for the trade entity assigned by the CCP’s clearing system. Must be unique per trade side/leg. Trade ID should not change during the life of the trade. -Used in single-sided trade

reporting. -Conditionally required once

CCP has received trade.

5000167

1040 Secondary TradeID

TrdID2 String Used to carry a secondary trade ID, which may be used as an external market identifier or as an internal identifier for use by CCP. This may not be communicated to the member.

10D1DC333 7A3025C5F2

Trade Capture Report Acknowledgement Message 3

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 487 TradeReport

TransType TransTyp String Indicates the action being taken

on a trade. Trade confirmations are sent out with a TradeReportTransType of ‘New’.

2 0 = New 1 = Cancel 2 = Replace 3 = Release 4 = Reverse 5 = Cancel Due To Back Out of Trade

1041 Firm Trade ID FirmTradeID String Trade ID assigned by the firm. -Carried at the side level. -Treated as a pass-through field by the CCP.

99D1AD555 7A302123F2

1042 Secondary Firm Trade ID

SecondaryFirmTradeID

String Secondary TradeID assigned by the firm.

5671AD555 7A302123F2

856 Trade ReportType

RptTyp String Indicates the purpose of the trade within the workflow and determines the action of the receiver of the trade. TradeReportType can be set by both CCP and clearing member.

0 0 = Submit 1 = Alleged 2 = Accept 3 = Decline 7 = (Locked-In) Trade Break 10 = Pended 11 = Alleged New 12 = Alleged Addendum 15 = Alleged Break

939 TrdRptStatus TrdRptStat String Used to report the trade status on trade acknowledgements that are sent in response to a clearing member submission. Conditionally required on acknowledgement.

0 0 = Accepted 1 = Rejected 3 = Accepted with errors

18 Execution Instruction ExecInst Char Special instructions for executing the order associated with the trade. Used for volatility-quoted options

r r = Execute as delta neutral using volatility provided.

828 TrdType TrdTyp String Specifies the type of trade being submitted to the CCP or reported by the CCP. Used to distinguish a significant difference in the regulatory or economic

1 0 = Regular Trade 1 = Block Trade 2 = EFP (Exchange for physical) 3 = Transfer 11 = Exchange for Risk (EFR)

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group requirements surrounding the trade. Sample values are Regular Trade, Block Trade, Privately Negotiated, Transfer, EFR, EFS, EFP.

12 = Exchange for Swap (EFS ) 22= Privately Negotiated Trade

(PNT) 23 = Substitution of Futures for

Forwards

829 TrdSubTyp TrdSubTyp String Specifies the sub type of the trade. Used to distinguish the transactional characteristics of a trade within a Trade Type. Sample values are Offset from give-up, Onset from give-up, CMTA, Historical Trade Transfer, Transaction from exercise, Transaction from assignment, etc.

10 5 = Offset due to an allocation 6 = Onset due to an allocation 7 = Differential spread 8 = Implied spread leg executed

against an outright 9 = Transaction from exercise 10 = Transaction from assignment 36 = Converted swap 40=Traded at settlement 42=Auction trades

1123 Trade HandlingInstr

TrdHandlInst String Indicates the type of trading model being conducted. Provides the context of the trade report and informs receiver of the proper response to take.

5 0 = Trade Confirmation 1 = Two-Party Report 2 = One-Party Report for Matching 3 = One-Party Report for Pass

Through 4 = Automated Floor Order Routing 5=Two-Party Report for Claim 7=Floor Matched Trade Submission

1124 OrigTrade HandlingInstr

OrigTrdHandl Inst

String Used to specify the original trade handling instruction. Useful for carrying the original trading model when a cleared trade confirm is being sent.

5 0 = Trade Confirmation 1 = Two-Party Report 2 = One-Party Report for Matching 3 = One-Party Report for Pass

Through 4 = Automated Floor Order Routing 5=Two-Party Report for Claim

75 Trade Date TrdDt Date The trade date assigned to an execution on the trading platform. For privately negotiated trades, the date on which the trade has been received by the CCP Required on all cleared trade

2008-10-19

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group reports sent by the CCP.

1125 OrigTradeDate

OrigTrdDt Date

Used to preserve original trade date when original trade is being referenced in a subsequent trade transaction, such as a transfer.

2007-07-12

1126 OrigTradeID OrigTrdID String Used to carry the original trade ID when a new trade ID has been assigned due to a transfer or a trade split. Provides a means of chaining to prior instance of trade.

123456

830 TransferReason TrnsfrRsn String Specifies the reason that the trade is being transferred. Optionally specified on trades with a Trade Type of Transfer.

A A = Error in account assignment (in-house) B = Correct 527 misclears C = Transfer at customer request D = Correct 551 misclears E = Transfer to correct a firm-to-firm in clearing a trade F = Transfer for trade liquidation that cleared at the wrong clearing house due to clerical error only I = Customer/House origin transfer to correct error N = Transfer of positions to a newly approved clearing member S = SIMEX transfers T = Transfer due to merger of two or more clearing firms W = Transfer due to withdrawl of a clearing firm X = Transfer of Singapore Exchange executed positions for liquidation

150 ExecType ExecTyp String Type of Execution being reported: Uses subset of ExecType for Trade Capture Reports.

J J=Trade in a Clearing Hold K=Trade has been released to

Clearing

880 TrdMatchID MtchID String Trade Match ID assigned in the MATCH123

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group matching engine and used to correlate a cleared trade with a match event. Should be common for all trades included in a match event. Conditionally required for trades reported from a matching platform. Trade Match ID assigned by CCP for PNT trade submissions. All purpose Internal identifier assigned to fills by the match engine. The TradeMatchID is common across all fills in a match. In the event that this is the primary ID used to uniquely identify a fill, then ExecID should be used instead.

17 ExecID ExecID String The Execution ID unique to each fill sent by the match engine. For OTC trades, this is the Deal ID assigned by CME ClearPort.

CBT16867

423 PriceType PxTyp String Indicates the manner in which the trade price is expressed.

10 1 = Percentage 2 = Per Unit 3 = Fixed Amount 5 = Premium 10 = Fixed Cabinet 11 = Variable Cabinet

1015 AsOfIndicator AsOfInd boolean Indicates that a trade is being cleared on a date after the trade date. Used commonly in floor trading when an outtrade is cleared.

0 0=False 1=True

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 716 SettlSessID SesID String The settlement session in which

a trade has been included. Indicates whether the trade is part of final or preliminary settlement. Indicates the pay/collect cycle. Generally included on intraday end of day trade register reports.

RTH ITD=IntraDay RTH=Regular Trading Hours EOD=End of Day

717 SettlSessSubID SesSub String Used to indicate the settlement session sequence if multiple settlement sessions are run.

1

32 LastQty LastQty Decimal The quantity associated with the trade. For multi-leg trades this is the spread quantity that traded. Based on the product, this can be the contract quantity or a notional amount.

10

31 LastPx LastPx Decimal The price at which a trade is cleared. This is the fill or match price if executed in an open market and the negotiated price if executed privately. Conditionally required if PriceType is not “Cabinet”. For Credit Default Swaps, this is the trade price in percent of par terms.

-0.195

15 Currency Ccy String Currency in which the price is quoted.

EUR

120 SettlCurrency SettlCcy String Currency in which the trade is settled.

USD

715 ClearingBusiness Date

BizDt Date The date on which a trade is formally cleared and settled by the CCP. Conditionally required on cleared trade reports generated by the CCP.

2007-05-17

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 6 AvgPx AvgPx Decimal Average Price. If present, the

LastPx contains the original price on the execution.

12.945646.756

819 AvgPxIndicator AvgPxInd String Specifies whether a trade has been directed into an average price group.

0 0=No Average Pricing 1=Trade Average Price Group 2=Last Trade Average Price Group

442 Multi LegReporting Type

MLegRptTyp String Indicates if a trade is being reported as a single-leg outright, the leg of a spread, or a multi-leg trade report.

3 1=Outright 2=Individual Leg of a multi leg

security 3=MultiLeg Security(COMBO)

60 TransactTime TxnTm UTC Timestamp

Transaction Time of the trade caused by State transition or by interaction from the firm.

2007-05-17T 11:00:00-06:00

573 MatchStatus MtchStat String The match status of the trade as acknowledged by the CCP. The trade is reported as either matched or unmatched.

0

0=Matched 1=Unmatched

574 Match Type MatchType String The point in the matching process at which the trade was matched. Reported by the CCP.

994 Tier Code TierCode String The pit trade matching tier in which the trade was matched. Reported by the CCP.

2

797 CopyMsg Indicator

CopyMsgInd Boolean Indicates that trade is being reported by CCP as drop copy of cleared trade confirmations.

N Y= Yes N= No

991 RndPx RndPx Decimal Rounded price of the group 101.22 824 TradeLegRefID TrdLegRefID String Used to provide a reference to

the trade id of the multi-leg trade report when a trade leg is being reported individually.

500012

Reject Reason TradeReportRejectReason

CCP reason for rejecting trade submission from firm or broker or exchange.

TBD DifferentialPrice DiffPx Decimal Represents the Differential between the legs of a Spread or the Difference from the Settlement Price. This attribute

-1.0

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group is used along with the DifferentialPriceType to indicate the the type of differential being represented in the message.

TBD PriceSubType PxSubTyp String Indicate on the Trade that the price is an initial price or the final price.

0 0=Initial price

1=Final price

TBD VenueType VenueTyp String The venue of the trade. X X=Ex-Pit

E=Electronic

P=Pit

TrdCaptRpt/Hdr

49 SenderCompID SID String Identifies the entity which is sending the message.

PLTFRM

56 TargetCompID TID String Identifies the entity to whom the message is being sent.

CME

50 SenderSubID SSub String Assigned value used to identify specific message originator (desk, trader, etc.). For ClearPort trades, this contains the Platform User ID.

57 TargetSubID TSub String Assigned value used to identify specific individual or unit intended to receive message. "ADMIN" reserved for administrative messages not intended for a specific user.

52 SendingTime Snt UTC

Timestamp

Time of message transmission (always expressed in UTC (Universal Time Coordinated, also known as "GMT").

2008-03-13T13:22:06-5:00

TrdCaptRpt/Instrmt

48 SecurityID ID String For futures or options this is ED

http://www.fixprotocol.org/FIXimate3.0/en/FIX.5.0SP1/tag49.html

http://www.fixprotocol.org/FIXimate3.0/en/FIX.5.0SP1/tag56.html

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group generally the product code as

assigned by the CCP. 22 SecurityIDSource

Src String Identifies class or source of the SecurityID (48) value. Required if SecurityID is specified. 100+ are reserved for private security identifications. String (6) indicates Single Name. String (9) indicates Index

H

H = Clearing House / Clearing Organization (optional)

104 = RED Code 106 = Pair Clip

1450 Seniority Snrty String Identifies the ranking of debts in the event of default from senior to junior (or subordinated). This tag is required when Src=104.

SR SR = Senior SD = Senior Secured SB = Subordinated

1449 RestructuringType RstrctTyp String A credit event that is triggered when a reference entity restructures its debt. This tag is required when Src=104 or Src=106.

XR XR = No Restructuring MR = Modified Restructuring FR = Full Restructuring MM = Modified Restructuring

167 Security Type SecTyp String Indicates type of instrument. FUT FUT = Future OOF = Option on Future OOP = Option on Physical IRS = Interest Rate Swap CDS = Credit Default Swaps FOR = Forward

200 MaturityMonthYear MMY String The expiration period code of an instrument. Used in combination with Symbol or SecurityID to specify the instrument identifier. The value can be expressed as YYYYMM, YYYYMMDD or YYYYMMwN, where ‘w’ represents a reference to ‘week’.

200706

207 SecurityExchange Exch String The exchange on which an CME CME

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group instrument is listed. Used as part of a business key instrument identifier. Not required for unlisted OTC instruments.

CBT NYMEX COMEX DME CMD (Credit Default Swaps specific) CCE CEE

107 SecurityDesc Desc String A brief description of the instrument The description usually follows a strict pattern and may be uniquely defined.

ED Jun 2007

55 Symbol Sym String(20) Used to provide the common and humanly understood reference to a security.

GEHZ

541 Maturity Date MatDt Date The expiration date of an option or futures instrument. The full date format of YYYYMMDD.

20070615

224 CouponPaymentDate CpnPmt Date Credit Default Swaps specific. The next date on which Coupon Premium is due.

223 CouponRate CpnRt Decimal Credit Default Swaps specific. The rate at which the Buyer of the Credit Default Swaps pays a Premium to the Seller.

3.25

874 InterestAccrualDate IntAccrl Date Credit Default Swaps specific. The last date on which Coupon Premium was paid.

TBD NotionalPercentOutstanding

NotlPctOut Pct Credit Default Swaps specific. Indicates the notional percent of the deal that is still outstanding based on the remaining components of the index. Used to calculate the true value of a Credit Default Swaps trade or position

100.00 TBD

1197 FuturesValuationMethod

ValMeth String For futures, indicates type of valuation method applied.

FUTER EQTY = premium style FUT = FUTURE(futures style

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group mark-to-market) FUTDA = futures style with an attached cash adjustment FWD = FORWARD FUTER = Valuation Method for Futures Erosion CDS = Credit Default Swaps

TBD ContractScalingFactor CtrctScalingFctr Decimal Contract Quantity Multiplier. Used to derive the cleared quantity from the Traded quantity

TBD

228 Factor Fctr Decimal Contract Value Factor by which price must be adjusted to determine the true nominal value of one futures/options contract. For Nymex Electricity contracts this will contain the number of peak days and during erosion period, it will contain the number of peak days remaining

21

TrdCaptRpt/Instrmt/AID (Repeating)

455 SecurityAltID AltID String Used to provide alternative security identifiers other than the primary identifier as provided in Security ID.

456 SecurityAltIDSource AltIDSrc String Identifies the source responsible for assigning the Alternative Security Identifier. Conditionally required if SecurityAltID is present.

H H = Clearing House / Clearing Organization

TCC=100 ITC=101 IXM=102 Globex=103

TrdCaptRptAck/Instrmt/Event

865 Event Type EventTyp Integer Credit Default Swaps represents the type of event. Values 111, 112, and 113 always represent the 20th day of a quarterly month on outbound

8 8=Swap Start Date 9=Swap End Date 111 = Next Unadjusted Coupon 112 = Previous Unadjusted Coupon 113 = Previous-Previous

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group confirmation messages. Unadjusted Coupon

866 EventDate Dt Date Credit Default Swaps Date associated with the event type.

2009-12-20

TrdCaptRptAck/Undly

309 UnderlyingSecurityID

ID String For futures or options this is generally the product code as assigned by the CCP.

ED

305 UnderlyingSecurityIDSource

Src String Identifies the source responsible for assigning the alternative underlying security identifier. Conditionally required if UnderlyingSecurityAltID is present.

H

H = Clearing House / Clearing Organization

310 UnderlyingSecurityType

SecTyp String Used to indicate the type of underlying security being reported; Future, Option on Physical, Option on Future, or Multi-leg for spreads.

FUT

FUT = Future OPT=Option

763 UnderlyingSecuritySubType

SubTyp String Used to indicate the sub type of the underlying security being reported. For spread instruments sub type is used to express the spread type, i.e. Calendar, Butterfly, Pack. This is not an enumerated field in FIX. Varies by CCP/Exchange.

BF

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 313 UnderlyingMaturityM

onthYear MMY String The expiration period code of an

underlying instrument. Used in combination with UnderlyingSymbol or UnderlyingSecurityID to specify the instrument identifier. The value can be expressed as YYYYMM, YYYYMMDD or YYYYMMwN where ‘w’ represents a reference to ‘week’.

200706

542 UnderlyingMaturityDate

MatDt Date The expiration date of an underlying instrument. The full date format of YYYYMMDD.

20080612

308 UnderlyingSecurityExchange

Exch String The exchange on which the underlying security is listed and has traded.

CME

307 UnderlyingSecurityDesc

Desc String A brief description of the underlying instrument provided in human readable format. The description usually follows a strict pattern and may be uniquely defined.

ED Jun 2007

53 UnderlyingSymbol Sym String Used to provide the common and humanly understood reference to an underlying security.

GEHZ ZGH8 BF:ZGH8:M8:U8

436 UnderlyingContractMultiplier

Mult Float Price multiplier of the underlying instrument. Used to determine the value of the trade price differential. Can be used to calculate trade variation using the differential of trade price to settlement price and the trade quantity.

250

998 UnderlyingUnitofMeasure

UOM String The unit of measure of the underlying commodity upon which the contract is based.

USD oz_tr

IPNT,JPY LBS

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 315 UnderlyingPutOrCall PutCall Integer Specifies the option right of the

underlying instrument. A call option gives the option holder the right to buy the underlying at the strike price. A put option gives the holder the right to sell the underlying at the strike price.

0 0=Put 1=Call

316 UnderlyingStrikePrice StrkPx Float The strike price of an underlying option. Determines where the option is with respect to the underlying instrument; in-the-money, at-the-money, or out-of-the-money.

55.25

TrdCaptRptAck/Undly /AID/

455 SecurityAltID AltID String Used to provide alternative underlying security identifiers other than the primary identifier as provided in Underlying Security ID.

456 SecurityAltIDSource AltIDSrc String Identifies the source responsible for assigning the security identifier of the underlying security. This may be the exchange, CCP, or an international organization.

O=Floor H = Clearing House / Clearing

Organization TCC=100 ITC=101 IXM=102 Globex=103

TrdCaptRptAck/TrdLeg/

687 LegQty Qty Decimal The actual quantity of the leg as it participates in the spread. The leg quantity determines the LegLastQty based on the traded quantity of the spread.

20

990 LegReportID RptID String Used to specify the trade id of a trade leg. Correlates to TradeID if the trade leg is reported individually.

23453534645

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 1152 LegNumber LegNo Integer Provides the sequence of the leg

within a strategy. For example, a calendar spread may have the front-month contract as the first leg and the back-month contract as the second leg.

2

654 LegRefID RefID String Arbitrary identifier for a specific leg of a multileg trade.

598075

637 LegLastPx LsstPx Decimal Provides the trade price of an individual leg based on the spread price and prices of the other legs.

67.6899

675 LegSettl Currency

SettlCcy String Currency for this leg of the multileg instrument.

usd

1073 LegLast ForwardPoints

Leg LastFwdPnts

Integer The forward points for this leg's fill event. This value can be in decimal form. For example, 61.99 points is expressed and sent as 0.0061990.449. Used for FX OTC trades.

.0449

1074 LegCalculated CcyLastQty

LegCalc CcyLastQty

Integer Used for the calculated quantity of the other side of the currency for this leg. Can be derived from LegQty and LegLastPx. Used for FX OTC trades.

12000000

1075 LegGross TradeAmt

Leg GrossTrdAmt

Integer For FX Futures can be used to express the notional value of a trade when LegLastQty and other quantity fields are expressed in terms of number of contracts. Used for FX OTC trades.

10000000

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group TrdCaptRptAck/TrdLeg/Leg

602 LegSecurityID ID String(26) Clearing Code for the Leg. K1K

608 LegCFICode CFI String(8) CFI Code for the Leg. FXXXXX OCXXXX Future/option specific.

616 LegSecurityExchange Exch String The exchange on which an instrument for a leg is listed. Used as part of a business key instrument identifier.

CME

CME CBT NYMEX COMEX DME CMD (Credit Default Swaps specific) CCE CEE

609 Leg SecurityType

SecTyp String(10) Type of Instrument (Future, Option, Forward, etc.).

FOR=Forward FUT=Future OOP=Options on Physical OOF=Options OPT=Options

610 LegMaturity MonthYear

MMY String(6) Leg MMY. 20070713

623 LegRatioQty RatioQty Integer The ratio of quantity for this individual leg relative to the entire multileg instrument.

1

624 LegSide Side String(1) The side of this individual leg (multileg instrument).

1 1 = Buy 2 = Sell

TrdCaptRpt/Amt (Repeating)

707 PosAmtType Typ String The amount as specified by the type of monetary amount associated with a transaction or position message. A positive amount indicates the buyer is receiving. A negative amount indicates the buyer is paying.

CRES

CRES = Cash Residual Amount IPMT = Initial Payment ICPN = Coupon Amount TVAR = Trade Variation Amount CASH

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 708 PosAmt Amt Decimal The amount as specified by the

Type (707) associated with the transaction or position message.

12345.67

TBD AmountReason Rsn String The reason as specified by the Cash Type (707) associated with the transaction or position message.

1 0=Options Cash Settlement 1=Pending Erosion Cash Adjustment 2=Final Erosion Cash Adjustment

1055 Position

Currency

Ccy String The Currency of the Amount of the transaction or position message.

EUR

TrdCaptRpt/ RptSide/TrdRegTS (Repeating)

769 TrdReg

Timestamp

TS String This is the TimeStamp. A Typ attribute is required if this attribute is set.

2007-05-18T13:20:58-06:00

770 TrdReg

Timestamp

Type

Typ String The Time of Timestamp being specified in the TineStamp field. This is required if Timestamp is Specified.

1 1 = Execution Time

TrdCaptRpt/RptSide (Repeating)

54 Side Side String Indicates whether the trade side is a buy or a sell.

1 1 = Buy 2 = Sell

37 OrderID OrdID String Engine assigned order identifier of the order associated with the side of a trade.

MYORDER

198 Secondary Order ID SecondaryOrderID String Used when the order associated with the trade has a public order ID.

12312BB2`

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 11 ClOrdID ClOrdID String Client assigned order identifier

of the order associated with the side of a trade. ID may be assigned by client or firm Unique identifier for Order as assigned by the firm.

MYORDER12

19 ExecRefID ExecRefID String Used to reference the execution id of a trade when a trade has been generated due to a trade cancellation or bust.

1009 SideQty SideQty Decimal Used to indicate the quantity on one side of a multi-sided Trade Capture Report.

55.55

1005 SideTrade ReportID

RptID String Used to indicate the report ID on one side of a multi-sided Trade Capture Report.

987654

1006 Side FillStationCd

FillStationCd String Used for order routing to indicate the Fill Station Code on one side of a multi-sided Trade Capture Report.

1007 Side ReasonCd

RsnCd String Used to indicate the reason of a multi-sided Trade Capture Report.

83 RptSeq RptSeq String Used for order routing to indicate the fill sequence on one side of a multi-sided Trade Capture Report.

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 1008 Side

TrdSubTyp TrdSubTyp Integer Used to support multi-sided

orders of different trade types. 5 5=Offset due to an allocation

6=Onset due to an allocation 7=Differential Spread 8=Implied Spread leg executed

against an outright 9=Transaction from Exercise 10=Transaction from Assignment

578 Trade

InputSource

InptSrc String Used to identify where the trade originated.

CMD

579 Trade InputDevice InptDev String Used to identify how the trade entered the CCP system.

API

1301 MarketID MktID N Identifies the market on which the trade was executed.

1300 MarketSegmentID MktSegID N Identifies the market venue on which the trade was executed.

821 Order InputDevice

OrdInptDev String Specific device number, terminal number or station where order was entered.

82 Cust

OrderCapacity

CustCpcty String The CTI for this trade. 1 1=Member for Own Account 2=Proprietary Firm Trading 3=Member for Another Member 4=All Others

336 Trading

SessionID

SesID String Indicates the trading session of the market when the trade was executed.

RTH RTH ETH

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 625 Trading

SessionSubID

SesSub String Indicates the trading session sub id of the market when the trade was executed. Occurs within a Trading Session.

X E = Electronic P = Pit X = Ex-Pit

943 TimeBracket TmBkt String A value which indicates the time interval in which a trade took place on the floor.

K

120 SettlCurrency SettlCcy String Opposite currency in a forex trade.

EUR

1380 Dividend Yield DividendYield Decimal Used for volatility-quoted options. The continuously-compounded annualized dividend yield of the underlying(s) of an option.

1190 RiskFreeRate RFR Decimal Used for volatility-quoted options The short-term interest rate that is currently offered on the market, i.e. LIBOR, EURIBOR, EONIOA

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 1188 Volatility Vol Decimal Annualized volatility for option

model calculations.

1189 TimeToExpiration TmToExp Used for volatility-quoted options. Time to expiration in years calculated as the number of days remaining to expiration divided by 365 days per year.

77 PositionEffect PosEfct String Open/Close Code. C O=Open C=Closed R=Rolled

58 Text Txt String May be used by the executing market to record any execution Details that are particular to that market.

Error in Side Block

752 SideMultiLeg ReportingType

MLegRptTyp String Default is a single security if not specified. Provided to support the scenario where a single leg instrument trades against an individual leg of a multileg instrument.

1 1=Outright 2=Leg 3=Combo

826 TradeAlloc Indicator

AllocInd String Indicates whether the trade is to be given or up or marked for give-up.

0 0=Allocation Not Required 1=Allocation Required (give up

trade), allocation information not provided (incomplete).

2=Use Allocation Provided with the Trade

----CCP Enums---- 0=No Allocations 1=No Allocation Info 2=Allocation with Info

70 AllocID AllocID String Used to assign an ID to the block of preallocations.

3442556

1072 SideGross TradeAmt

SideGross TradeAmt

Integer 10000000

1057 Aggressor Indicator

AgrsrInd String Used to indicate the aggressor in a trade. Fees are often dependent on an aggressor indicator.

Y

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 1 Account Acct String The customer account for which

the trade was executed. Conditionally required if Origin is Customer.

H34567

1328 Reject Text RejectText String Free form field used to provide description of reject reason or other information.

The Quantity is Invalid

TrdCaptRpt/ RptSide/Pty

448 PartyID ID String Used to identify source of PartyID. Required if PartyIDSource is specified.

XXX

452 PartyRole R Integer Identifies the type of PartyID (e.g. Executing Broker).

17 1= Executing Firm 4 =Clearing Firm 7=Trading Firm 12 =Executing Trader 17 =Contra Firm 18 =Contra Clearing Firm 21 =Clearing Organization 22 =Exchange 24 =Customer Account 30=Inter-Dealer Broker (IDB) 36 =Trader at Trading Firm 37 =Contra Trader 38 =Position Account 42 =Contra Exchange 43 =Internal Carry Account 44 =Order Entry Operator ID 45 =Secondary Account Number 47=Third Party Allocation Firm 55=Session ID 62=Inter-Dealer Broker (IDB) Sales Person

523 PartySubID ID String Sub-identifier (e.g. Clearing Account for PartyRole.

CUST

803 PartySubIDType Typ Integer Type of PartySubID (523) value. 26 26 = Position account type

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 4000+ = Reserved and available for bi-laterally agreed upon user defined values.

3= Trader operator or IDB operator

447 Party ID Source Src String Represents the source. responsible for assigning the Party Identifier.

D C = Generally accepted market participant identifier

D = Proprietary / Custom code

TrdCaptRpt/RptSide/Alloc

79 Individual Give-up AllocAccount String The account to which the trade is being given-up or posted. Part of a repeating group which can be specified multiple times.

123A

80 Quantity Qty Decimal The Quantity that is allocated to the take up firm or the quantity claimed by the take-up firm.

20

467 Individual

AllocID

IndAllocID String Occurs in the Allocation block of the trade and is used to specify the Allocation ID of the allocation to which the trade is being directed.

GRP1

80 AllocQty Qty Integer The quantity to be allocated. 47

993 AllocCustomer

Capacity

CustCpcty String The CTI associated with the account associated with the trade.

4 1=Member for Own Account 2=Proprietary Firm Trading 3=Member for Another Member 4=All Others

FIXML Trade API


Tag FIX Attribute FIXML Name Data Type Description Sample Data Valid Values CME Group 989 Secondary

Individual

AllocID

IndAllocID2 String The allocation ID assigned by Clearing and sent back on the Confirm.

348577

TrdCaptRpt/RptSide/Alloc/Pty (Repeating)

757 Nested2PartyID ID String Used to identify source of PartyID. Required if PartyIDSource is specified.

XXX

759 Nested2PartyRole R Integer Identifies the type of PartyID (e.g. Executing Broker).

1 1= Executing Firm (Take up Executing Firm) 4 =Clearing Firm (Take up Clearing Firm) 21 =Take up Clearing Organization 22 =Take up Executing Firm Exchange

2.0 Revision History Version Date Author Description 1.0 9/30/08 NU Initial version of document.

1.1 1/26/09 LM Updated tag 452 – PartyRole (RptSide) Modified tag numbers and sample data in TrdCaptRpt/RptSide/Alloc/Pty (Repeating)

1.2 6/16/09 NU Includes CDS information as well as NYMEX, COMEX, and DME updates.

1.3 2/10/10 NU Add tag 1450 – Snrty, tag 1449-RstrctTyp, value of IPMT to tag 707-Typ, values 104 and 106 to tag 22-Src, and values 111, 112, and 113 to tag 865-EventTyp.

1.4 4/23/10 NU Updated cover page to remove 360 branding. 1.5 5/13/10 NU Added 42=Auction trades to tag 829.

1.6 7/20/10 NU Added CCE and CEE to tag 207-Exch and added tag 616-Exch. Removed CME specific and IRS references, tag 155-SettlCurrFxRt, tag 1189-TmToExp.

1.7 11/17/10 NU Add valid values to tag 830-TransferReason.

Futures trading is not suitable for all investors, and involves the … · 2017-05-10 · Futures...

Documents

Transcript of Futures trading is not suitable for all investors, and involves the … · 2017-05-10 · Futures...