FUSION TYRE CHANGER HC8531 - storage.googleapis.com · Quick tubeless tyre inflation system uses...
1
HC8531 CAIZERQUIP.COM [email protected] (02) 4255 7888 TYRE CHANGER - 240V Italian electric motor (Elprom) - 10-22 inch rim outside clamping - 12-25 inch rim inside clamping - 2500kg bead breaking force - RH mounted helper press roller arms - External jet blaster hose for seating tyre beads - Tyre lever, soap tube and plastic rim protectors FRONT AND SIDE PROTECTIVE MOULDINGS ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ » Automatic tyre changer with pneumatic tilt-back tower. Simultaneous pneumatic locking of the horizontal and vertical arms with automatic positioning of the head in the optimal work position. Head with interchangeable plastic parts for rim protection. Pneumatic tilting arm support column featuring high torsional rigidity in all operation positions. Clockwise and anticlockwise rotation of the turntable through electric motor. Front extractable pedal assembly. Protection kit for bead breaker shoe, demounting head, clamping jaw and lever comes standard. Quick tubeless tyre inflation system uses external tank with air blast hose nozzle. Pressure read out unit with pressure release button. Complete with lubrication filter and pressure regulator Equipped with inflation limiting valve. RH helper arm: Rotating arm with bead pressing block for drop-centre rims, to assist fitting and removal of tyres, particularly low profile tyres. Rim pressing cone for assisting wheel clamping Tyre lifting disk to aid in demounting difficult tyre and wheel combinations. Mid-position roller helps loosening of the second bead » » » Rim Clamping Outside Rim Clamping Inside Max. Wheel Width Max. Wheel Diameter Beadbreaking Force Operating Pressure Electric Motor Power Supply Noise Level 10”~22” 12”~25” 14” 1150mm 2,500Kg 8~10bar 0.55kW Made in Italy 240V/50Hz/1PH <70db
Transcript of FUSION TYRE CHANGER HC8531 - storage.googleapis.com · Quick tubeless tyre inflation system uses...
HC8531
CAIZERQUIP.COM [email protected] (02) 4255 7888
TYRE
CHA
NG
ER
- 240V Italian electric motor (Elprom)- 10-22 inch rim outside clamping- 12-25 inch rim inside clamping- 2500kg bead breaking force- RH mounted helper press roller arms- External jet blaster hose for seating tyre beads- Tyre lever, soap tube and plastic rim protectors
FRONT AND SIDE PROTECTIVE MOULDINGS
♦♦
♦♦
♦
♦♦
♦
♦♦♦♦
»
Automatic tyre changer with pneumatic tilt-back tower.Simultaneous pneumatic locking of the horizontal and vertical arms with automatic positioning of the head in the optimal work position.Head with interchangeable plastic parts for rim protection.Pneumatic tilting arm support column featuring high torsional rigidity in all operation positions.Clockwise and anticlockwise rotation of the turntable through electric motor.Front extractable pedal assembly.Protection kit for bead breaker shoe, demounting head, clamping jaw and lever comes standard.Quick tubeless tyre inflation system uses external tank with air blast hose nozzle.Pressure read out unit with pressure release button.Complete with lubrication filter and pressure regulatorEquipped with inflation limiting valve.RH helper arm:
Rotating arm with bead pressing block for drop-centre rims, to assist fitting and removal of tyres, particularly low profile tyres.Rim pressing cone for assisting wheel clampingTyre lifting disk to aid in demounting difficult tyre and wheel combinations.Mid-position roller helps loosening of the second bead
» »
»
Rim Clamping Outside
Rim Clamping Inside
Max. Wheel Width
Max. Wheel Diameter
Beadbreaking Force
Operating Pressure
Electric Motor
Power Supply
Noise Level
10”~22”
12”~25”
14”
1150mm
2,500Kg
8~10bar
0.55kW Made in Italy
240V/50Hz/1PH
<70db
