Furniture Lecture 08
-
Upload
whatever530 -
Category
Documents
-
view
217 -
download
0
Transcript of Furniture Lecture 08
-
7/28/2019 Furniture Lecture 08
1/17
FURNITURE
-
7/28/2019 Furniture Lecture 08
2/17
Furniture can be a product of design and is considereda form of decorative art. There are several types of
furniture - residential; lodging; food service;office/administration; maintenance/warehouse;recreation; medical; educational; religious, andsquadron operations. Furniture should be purchased
for its functionality, durability, and aesthetic features.Furniture can be made from many materials, includingmetal, plastic, and wood. Furniture can be made usinga variety of woodworking joints which often reflect thelocal culture.
SHELF IN WOOD, STEEL, PLASTIC AND FABRIC
-
7/28/2019 Furniture Lecture 08
3/17
Wooden Furniture
Wood furniture is made of various tree woods,
such as- Shegun, Gamari, Shal, Mango etc.Among these names, Shegun and Gamari woodare the most preferred woods for furniture.Gypsum Board furniture are the cost-effectiveway to achieve the impression of wood furniture.For furniture made of GB, veneers are used fordecoration. Veneers are thin sheets of wood thatare glued to base materials, then stainedand finished.
At present, another cost-effective way for woodfurniture is to import from China. For theseimported furniture, they are either made ofsoftwoods which are evergreens, like-Spruce,
Cedar etc; or hardwoods which are deciduous,like-maple, oak etc. Softwoods are used forresidential grade Furniture, while hardwoods areused to construct seating frames, base cabinetry,and solid furniture. Hardwoods make good
surface finishes.
-
7/28/2019 Furniture Lecture 08
4/17
Wood
MDF Board
Particle Board
Veneer Board
-
7/28/2019 Furniture Lecture 08
5/17
Interior Construction
Ply wood refers to a laminated wood-panel construction used to gain the
advantage of stability, strength in both directions, and greater resistance to
checking and spli tting. Modern plywood panels also make possible the use of
thin veneers producing a consistent matched appearance impossible in solid
wood. Solid wood will vary greatly in color and grain direction, while thin
veneers are consistent in grain and color since they are cut from the same piece
of wood.
Ply wood is a wood panel product made by bonding veneers together under
heat and pressure, usually with the grain of adjacent piles at right angles to
each other. High density overlay (HDO) is a wood panel product that has a resin-
fibre overlay on both sides, providing a smooth, hard, abrasion-resistantsurface. (ching)
Ply Wood
i C i
-
7/28/2019 Furniture Lecture 08
6/17
Interior Construction
Ply wood Appearance Grades:
Softwood panels:
N For natural finishes
A Smooth face suitable for painting
B Utility panelHardwood Panels:
Premium (A) slight imperfectionsonly
Good (1) For natural finishes
Sound (2) Smooth for painting
I t i C t ti
-
7/28/2019 Furniture Lecture 08
7/17
Interior Construction
Gypsum board-often called drywall or
plasterboard-consists of a gypsum coresurfaced with paper or other coveringmaterial. It may be finished by painting orby the application of ceramic tile or aflexible wall covering.
Major types of gypsum board include:
Regular gypsum board for interiorwalls and ceilings
Moisture-resistant gypsum boardused as a backing for ceramic tile inhigh-moisture conditions
Fire-resistant (type-X) gypsumboard used in fire resistant
construction
Pre-finished panels are also available in avariety of colors, textures, and patterns
I t i C t ti
-
7/28/2019 Furniture Lecture 08
8/17
Interior Construction
I t i C t ti
-
7/28/2019 Furniture Lecture 08
9/17
Interior Construction
Veneer
The veneers used for plywoodvary in thickness from about
one-twentieth of an inch to
one-eight. Veneers are cut
three ways: sawing, rotary
cutting, and slicing.
Sawing: Sawn veneer is
produced in long strips by
sawing, as its name implies.
These veneers are about one-eighth of an inch thick. This
method is seldom used today.
Rotary-cut veneer is made by
placing the log in a lathe and
rotating it against a knife. Thewood is un-peeled in one
continuous sheet, like the
peeling from a huge pencil
sharpner.
-
7/28/2019 Furniture Lecture 08
10/17
Interior Construction
-
7/28/2019 Furniture Lecture 08
11/17
Interior Construction
Interior Construction
-
7/28/2019 Furniture Lecture 08
12/17
Interior Construction
Interior Construction
-
7/28/2019 Furniture Lecture 08
13/17
Interior Construction
Interior Construction
-
7/28/2019 Furniture Lecture 08
14/17
Interior Construction
Interior Construction
-
7/28/2019 Furniture Lecture 08
15/17
Interior Construction
Interior Construction
-
7/28/2019 Furniture Lecture 08
16/17
Interior Construction
Interior Construction
-
7/28/2019 Furniture Lecture 08
17/17
Interior Construction