Fullerton Tool Co. - Discount Tools Tool Co. maintains inventory of standard catalog items with our...
76
Transcript of Fullerton Tool Co. - Discount Tools Tool Co. maintains inventory of standard catalog items with our...
Fullerton Tool Co.121 Perry Street • Saginaw, MI 48602
Phone: (989) 799-4550 • Toll Free: (800) 248-8315 • Fax: (989) 792-3335Email: [email protected] • http://www.fullertontool.com
Manufacture ID #690865
Fullerton Tool Co. maintains inventory of standard catalog items with our factory sales representatives shown below. These locations will reduce shipping costs and speed availability of standard products. *Note: By using the west coast warehouses, operating hours are extended for shipping of urgently needed products.
Fullerton Tool Co. Turpin Sales & Marketing, Inc.
Two Brigham Street,Northborough, MA 01532
Phone: 508-393-6011FAX: 508-393-9023www.turpinsales.com
Email: [email protected]
Ind. Marketing
8915 Sweetwater LaneHouston, TX 77037
Phone: 281-820-5838FAX: 281-820-5651
Email: [email protected]
Ind. Marketing
7904 E. 11th St.Tulsa, OK 74112
Phone: 918-836-3381FAX: 918-836-1498
Email: [email protected]
Hardy Sales Co.
2570 W. Barberry Pl.Denver, CO 80204
Phone: 303-892-9229FAX: 303-893-5012
Email: [email protected]
M C Sales & Marketing15178 Transistor Lane
Huntington Beach, CA 92649Phone: 714-901-8589FAX: 714-901-8579
Toll Free 888-299-8665* This Location is open until
8 pm - EST7 pm - CST6 pm - MST
Email: [email protected]
Tucker Weitzel & Assoc.
230 S. Austin St.Seattle, WA 98108
Phone: 206-763-3690FAX: 206-763-3797
* This Location is open until 8 pm - EST7 pm - CST6 pm - MST
Email: [email protected]
Continuous improvement requires a commitment to remain on the cutting edge of technology. To that end we have tripled our capacity of CNC machinery in just three years. Our manufacturing facility is a model of the latest in production efficiency, leading edge technology in computer aided design, fiber optic networking for both on-line quality control, in-process inspection, and on-line machine compensation to manufacture that perfect tool. Our processes also include SPC (Statistical Process Control), a complete design and engineering department, and a dedicated work force with an average of 18 years of experience. To further enhance our position we have successfully implemented ISO9002, an internationally recognized quality control program. Our selection of solid carbide cutting tools goes well beyond endmills. We also offer drills, including special coolant hole styles, reamers, saws, keyseat cutters, countersinks, boring tools, and rotary files, plus a larger selection of special cutting tools and services than can be found from any other solid carbide tool source. When you buy a Fullerton product you are not buying a commodity item; you are buying a fully engineered
top quality carbide cutting tool.
ISO 9002REGISTERED
ANSI-RAB
QMS
AC
CR
ED
IT
ED
Quality System Registered to ISO 9002:1994®NSF
Light Colors Indicate
Two Day Shipping
From Respective
Warehouse
Dark Colors Indicate
One Day Shipping
From Respective
Warehouse
Andrew T. Sustare
Direct Factory SalesNon-Stocking
24020 Peachtree LnCarrollton VA 23314
Phone: 757-238-9608FAX: 757-238-3538
Cell Phone: 757-685-9964
Standard End Mills Standard Lengths ............................. 2-7 Corner Radius.......................................8 Stub Length ..........................................9 XL Length ..................................... 10-12 NC Tolerance......................................13 Metric Sizes .................................. 14-15 Sub Miniature......................................16 Double End ................................... 17-19 Straight Flutes.....................................20 Tapered ..............................................21 Routers ...............................................22
Titanium CoatingTitanium Coating..................................................................2323
Hi-Performance End Mills Aluma-Mill 45° Spiral ..........................24 Twister 60° Spiral................................25 Form Relieved Radius Mill..................25 Maximus 15° Spiral.............................26 Hoggers ..............................................27 Alloy Rougher 35° Spiral ....................28 Alloy Finishing 45° Spiral ....................29
Special End Mill Services JIT Decimal Sizes ...............................30 JIT Corner Radius...............................31 JIT Weldon Flats.................................31
End Mill Speed & Feed Recommendations and End Mill Selections ....................... 32-33
Standard Drills Standard Length ........................... 34-35 Stub Length ........................................35 Three Flute Standard & Aluma Drills......................36 Slow Spiral Stub Length .....................37 Circuit Board .......................................38 Center Drill ..........................................39 NC Spotting Drill .................................40 Flat Drills.............................................40 Straight Flutes.....................................41 Carbide Tipped ............................. 42-43
Specialty Drills Parabolic.............................................44 DB Drill................................................44 Poly Drill..............................................45 Coolant Drills ......................................46
Drill Speed & Feed Recommendations..............................47
Reamers JIT Solid Carbide Decimal Sizes .. 48-49 Over/Under and Dowel Pin .................50 Fractional-Wire-Metric Short Sizes ................................... 50-51 Fractional Standard Length ................52
Reamer Speed & Feed Recommendations..............................53
Centerless Ground Solid Carbide Cylinders & Engraving Blanks ............................54
Solid Carbide Keyseat Cutters & Thin Disc Cutters.............................55
Carbide Rotary Files Cut Selection Chart.............................59 Carbide Burrs 1/4” Shank ............. 60-62 Miniature Burrs 1/8”-3/16” Shank.. 63-64 Metric Sizes .................................. 65-66 Fibre Glass Routers............................67 Burr Sets....................................... 68-69
Solid Carbide Saws ...................... 56-58
Solid Carbide Countersinks ................70 Solid Carbide Boring Tools .................70 Special Tools ......................................71 Terms & Conditions ............................72
Fullerton Team............................73
STA
ND
AR
D
EN
D M
ILLS
HI P
ERFO
RM
AN
CE
END
MILLS
SP
EC
IAL
SER
VIC
ES
STA
ND
AR
D
DR
ILLS
SP
EC
IALTY
DR
ILLS
REA
MER
S
CA
RB
IDE
SA
WS
RO
TA
RY
FIL
ES
FU
LLER
TO
N
TEA
M
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
Price
CuttingLength
O/ALength
32001
32002
32003
32004
32005
32006
32007
32008
32009
32010
32650
32011
32667
32012
32666
32013
32918
32014
32919
32015
32920
32016
32921
32017
32922
32900
32923
32018
32924
32910
32925
32019
32020
32021
32022
32023
32024
32025
32026
32027
32028
32029
3200
14.65
10.65
10.65
10.65
10.65
10.65
10.65
9.60
15.10
15.10
15.10
13.65
20.45
20.45
20.45
17.60
27.55
27.55
27.55
24.70
31.25
31.25
31.25
28.10
40.25
40.25
40.25
37.45
47.10
47.10
47.10
42.10
74.40
75.65
116.25
109.25
166.75
169.25
-
-
-
-
33097
33100
33101
32326
33102
32327
33103
32328
33104
33105
33106
32329
33107
33108
33109
32330
33110
33111
33112
32331
33113
33114
33115
32332
33116
33117
33118
32333
33119
33120
33121
32334
32335
32336
33122
32337
33123
32338
-
-
-
-
15.45
11.45
11.45
11.45
11.45
11.45
11.45
10.40
16.10
16.10
16.10
14.65
22.50
22.50
22.50
19.65
30.70
30.70
30.70
27.85
34.40
34.40
34.40
31.25
44.05
44.05
44.05
41.25
50.90
50.90
50.90
45.90
80.00
81.15
122.70
115.70
176.30
179.05
-
-
-
-
EDP NO.
3200 TiN
EDP NO.Price Price
3200 TiCN
EDP NO. 33098
32727
32728
32729
32730
32731
32732
32733
32734
32735
32736
32737
32738
32739
32740
32741
32742
32743
32744
32745
32746
32747
32748
32749
32750
32751
32752
32753
32754
32755
32756
32757
32758
32759
32760
32761
32762
32763
-
-
-
-
30604
30605
30606
30607
30608
30609
30610
30611
30612
30613
30614
30615
30616
30617
30618
30619
30620
30621
30622
30623
30624
30625
30626
30627
30628
30629
30630
30631
30632
30633
30634
30635
30636
30637
30638
30639
30640
30641
-
-
-
-
15.45
11.45
11.45
11.45
11.45
11.45
11.45
10.40
16.10
16.10
16.10
14.65
22.50
22.50
22.50
19.65
30.70
30.70
30.70
27.85
34.40
34.40
34.40
31.25
44.05
44.05
44.05
41.25
50.90
50.90
50.90
45.90
80.00
81.15
122.70
115.70
176.30
179.05
-
-
-
-
Price
3200 TiAlN
EDP NO.
SERIES 3200
1/64" 3/64" 1/8" 1-1/2" 13.25
1/32" 3/32" 1/8" 1-1/2" 9.25
3/64" 3/16" 1/8" 1-1/2" 9.25
1/16" 1/4" 1/8" 1-1/2" 9.25
5/64" 1/4" 1/8" 1-1/2" 9.25
3/32" 3/8" 1/8" 1-1/2" 9.25
7/64" 1/2" 1/8" 1-1/2" 9.25
1/8" 1/2" 1/8" 1-1/2" 8.20
9/64" 9/16" 3/16" 2" 13.25
5/32" 9/16" 3/16" 2" 13.25
11/64" 9/16" 3/16" 2" 13.25
3/16" 5/8" 3/16" 2" 11.80
13/64" 5/8" 1/4" 2-1/2" 16.75
7/32" 5/8" 1/4" 2-1/2" 16.75
15/64" 3/4" 1/4" 2-1/2" 16.75
1/4" 3/4" 1/4" 2-1/2" 13.90
17/64" 7/8" 5/16" 2-1/2" 22.05
9/32" 7/8" 5/16" 2-1/2" 22.05
19/64" 7/8" 5/16" 2-1/2" 22.05
5/16" 7/8" 5/16" 2-1/2" 19.20
21/64" 7/8" 3/8" 2-1/2" 25.75
11/32" 7/8" 3/8" 2-1/2" 25.75
23/64" 1" 3/8" 2-1/2" 25.75
3/8" 1" 3/8" 2-1/2" 22.60
25/64" 1" 7/16" 2-3/4" 33.40
13/32" 1" 7/16" 2-3/4" 33.40
27/64" 1" 7/16" 2-3/4" 33.40
7/16" 1" 7/16" 2-3/4" 30.60
29/64" 1" 1/2" 3" 40.25
15/32" 1" 1/2" 3" 40.25
31/64" 1" 1/2" 3" 40.25
1/2" 1" 1/2" 3" 35.25
9/16" 1-1/4" 9/16" 3-1/2" 64.50
5/8" 1-1/2" 5/8" 3-1/2" 65.75
11/16" 1-1/2" 3/4" 4" 104.50
3/4" 1-1/2" 3/4" 4" 97.50
7/8" 1-1/2" 7/8" 4" 149.50
1" 1-1/2" 1" 4" 152.00
1-1/8" 2" 1" 4-1/2" 406.35
1-1/4" 2" 1-1/4" 4-1/2" 423.75
1-3/8" 2" 1-1/4" 4-1/2" 503.65
1-1/2" 2" 1-1/4" 4-1/2" 511.05
CuttingDiameter
ShankDiameter
2
Series 3200 NON COATED
Series 3200 TiN TiN COATED
Series 3200 TiCN TiCN COATED
Series 3200 TiAlN TiAlN COATED
Coated Tools
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
STA
ND
AR
D
EN
D M
ILLS
CuttingLength
O/ALength
SERIES 3200B
3200B
12.50
12.50
12.50
12.50
12.50
12.50
11.25
17.75
17.75
17.75
16.00
23.95
23.95
23.95
20.40
33.05
33.05
33.05
29.50
37.70
37.70
37.70
33.75
50.60
50.60
50.60
47.10
59.15
59.15
59.15
52.90
90.50
92.10
142.35
133.60
204.10
207.25
-
-
-
-
30490
30491
30492
30493
30494
30495
30496
30497
30498
30499
30500
30501
30502
30503
30504
30505
30506
30507
30508
30509
30510
30511
30512
30513
30514
30515
30516
30517
30518
30519
30520
30521
30522
30523
30524
30525
30526
-
-
-
-
13.30
13.30
13.30
13.30
13.30
13.30
12.05
18.75
18.75
18.75
17.00
26.00
26.00
26.00
22.45
36.20
36.20
36.20
32.65
40.85
40.85
40.85
36.90
54.40
54.40
54.40
50.90
62.95
62.95
62.95
56.70
96.00
97.60
148.80
140.05
213.65
216.80
-
-
-
-
EDP NO.
3200B TiN
EDP NO.Price Price
3200B TiCN
EDP NO.
3200B TiAlN
EDP NO.
30339
30340
30341
30342
30343
30344
30345
30346
30347
30348
30349
30350
30351
30352
30353
30354
30355
30356
30357
30358
30359
30360
30361
30362
30363
30364
30365
30366
30367
30368
30369
30370
30371
30372
30373
30374
30375
-
-
-
-
30717
30718
30719
30720
30721
30722
30723
30724
30725
30726
30727
30728
30729
30730
30731
30732
30733
30734
30735
30736
30737
30738
30739
30740
30741
30742
30743
30744
30745
30746
30747
30748
30749
30750
30751
30752
30753
-
-
-
-
32030
32031
32032
32033
32034
32035
32036
32037
32038
32651
32039
32652
32040
32653
32041
32930
32042
32931
32043
32932
32044
32933
32045
32934
32904
32935
32046
32936
32914
32937
32047
32048
32049
32050
32051
32052
32053
32054
32055
32056
32057
1/32" 3/32" 1/8" 1-1/2" 11.10
3/64" 3/16" 1/8" 1-1/2" 11.10
1/16" 1/4" 1/8" 1-1/2" 11.10
5/64" 1/4" 1/8" 1-1/2" 11.10
3/32" 3/8" 1/8" 1-1/2" 11.10
7/64" 1/2" 1/8" 1-1/2" 11.10
1/8" 1/2" 1/8" 1-1/2" 9.85
9/64" 9/16" 3/16" 2" 15.90
5/32" 9/16" 3/16" 2" 15.90
11/64" 9/16" 3/16" 2" 15.90
3/16" 5/8" 3/16" 2" 14.15
13/64" 5/8" 1/4" 2-1/2" 20.25
7/32" 5/8" 1/4" 2-1/2" 20.25
15/64" 3/4" 1/4" 2-1/2" 20.25
1/4" 3/4" 1/4" 2-1/2" 16.70
17/64" 7/8" 5/16" 2-1/2" 27.55
9/32" 7/8" 5/16" 2-1/2" 27.55
19/64" 7/8" 5/16" 2-1/2" 27.55
5/16" 7/8" 5/16" 2-1/2" 24.00
21/64" 7/8" 3/8" 2-1/2" 32.20
11/32" 7/8" 3/8" 2-1/2" 32.20
23/64" 1" 3/8" 2-1/2" 32.20
3/8" 1" 3/8" 2-1/2" 28.25
25/64" 1" 7/16" 2-3/4" 41.75
13/32" 1" 7/16" 2-3/4" 41.75
27/64" 1" 7/16 2-3/4" 41.75
7/16" 1" 7/16" 2-3/4" 38.25
29/64" 1" 1/2" 3" 50.30
15/32" 1" 1/2" 3" 50.30
31/64" 1" 1/2" 3" 50.30
1/2" 1" 1/2" 3" 44.05
9/16" 1-1/4" 9/16" 3-1/2" 80.60
5/8" 1-1/2" 5/8" 3-1/2" 82.20
11/16" 1-1/2" 3/4" 4" 130.60
3/4" 1-1/2" 3/4" 4" 121.85
7/8" 1-1/2" 7/8" 4" 186.85
1" 1-1/2" 1" 4" 190.00
1-1/8" 2" 1" 4-1/2" 507.95
1-1/4" 2" 1-1/4" 4-1/2" 529.70
1-3/8" 2" 1-1/4" 4-1/2" 629.55
1-1/2" 2" 1-1/4" 4-1/2" 638.80
Price
13.30
13.30
13.30
13.30
13.30
13.30
12.05
18.75
18.75
18.75
17.00
26.00
26.00
26.00
22.45
36.20
36.20
36.20
32.65
40.85
40.85
40.85
36.90
54.40
54.40
54.40
50.90
62.95
62.95
62.95
56.70
96.00
97.60
148.80
140.05
213.65
216.80
-
-
-
-
Price Cutting
DiameterShank
Diameter
3
Series 3200B NON COATED
Series 3200B TiN TiN COATED
Series 3200B TiCN TiCN COATED
Series 3200B TiAlN TiAlN COATED
Coated Tools
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
CuttingLength
O/ALength
SERIES 3215
Price Price
3215 TiAlN
EDP NO.
32058
32059
32060
32061
32062
32063
32064
32065
32066
32067
32654
32068
32655
32069
32656
32070
32940
32071
32941
32072
32942
32073
32943
32074
32944
32901
32945
32075
32946
32911
32947
32076
32077
32078
32079
32080
32081
32082
3215
EDP NO.
3215 TiN
EDP NO.
3215 TiCN
EDP NO.
14.65
10.65
10.65
10.65
10.65
10.65
10.65
9.60
15.10
15.10
15.10
13.65
20.45
20.45
20.45
17.60
27.55
27.55
27.55
24.70
31.25
31.25
31.25
28.10
40.25
40.25
40.25
37.45
47.10
47.10
47.10
42.10
74.40
75.65
116.25
109.25
166.75
169.25
33124
33125
33126
32339
33127
32340
33128
32341
33129
33130
33131
32342
33132
33133
33134
32343
33135
33136
33137
32344
33138
33139
33140
32345
33141
33142
33143
32346
33144
33145
33146
32347
32348
32349
33147
32350
33148
32351
15.45
11.45
11.45
11.45
11.45
11.45
11.45
10.40
16.10
16.10
16.10
14.65
22.50
22.50
22.50
19.65
30.70
30.70
30.70
27.85
34.40
34.40
34.40
31.25
44.05
44.05
44.05
41.25
50.90
50.90
50.90
45.90
80.00
81.15
112.70
115.70
176.30
179.05
32764
32765
32766
32767
32768
32769
32770
32771
32772
32773
32774
32775
32776
32777
32778
32779
32780
32781
32782
32783
32784
32785
32786
32787
32788
32789
32790
32791
32792
32793
32794
32795
32796
32797
32798
32799
32800
32801
30642
30643
30644
30645
30646
30647
30648
30649
30650
30651
30652
30653
30654
30655
30656
30657
30658
30659
30660
30661
30662
30663
30664
30665
30666
30667
30668
30669
30670
30671
30672
30673
30674
30675
30676
30677
30678
30679
1/64" 3/64" 1/8" 1-1/2" 13.25
1/32" 3/32" 1/8" 1-1/2" 9.25
3/64" 3/16" 1/8" 1-1/2" 9.25
1/16" 1/4" 1/8" 1-1/2" 9.25
5/64" 1/4" 1/8" 1-1/2" 9.25
3/32" 3/8" 1/8" 1-1/2" 9.25
7/64" 1/2" 1/8" 1-1/2" 9.25
1/8" 1/2" 1/8" 1-1/2" 8.20
9/64" 9/16" 3/16" 2" 13.25
5/32" 9/16" 3/16" 2" 13.25
11/64" 9/16" 3/16" 2" 13.25
3/16" 5/8" 3/16" 2" 11.80
13/64" 5/8" 1/4" 2-1/2" 16.75
7/32" 5/8" 1/4" 2-1/2" 16.75
15/64" 3/4" 1/4" 2-1/2" 16.75
1/4" 3/4" 1/4" 2-1/2" 13.90
17/64" 7/8" 5/16" 2-1/2" 22.05
9/32" 7/8" 5/16" 2-1/2" 22.05
19/64" 7/8" 5/16" 2-1/2" 22.05
5/16" 7/8" 5/16" 2-1/2" 19.20
21/64" 7/8" 3/8" 2-1/2" 25.75
11/32" 7/8" 3/8" 2-1/2" 25.75
23/64" 1" 3/8" 2-1/2" 25.75
3/8" 1" 3/8" 2-1/2" 22.60
25/64" 1" 7/16" 2-3/4" 33.40
13/32" 1" 7/16" 2-3/4" 33.40
27/64" 1" 7/16" 2-3/4" 33.40
7/16" 1" 7/16" 2-3/4" 30.60
29/64" 1" 1/2" 3" 40.25
15/32" 1" 1/2" 3" 40.25
31/64" 1" 1/2" 3" 40.25
1/2" 1" 1/2" 3" 35.25
9/16" 1-1/4" 9/16" 3-1/2" 64.50
5/8" 1-1/2" 5/8" 3-1/2" 65.75
11/16" 1-1/2" 3/4" 4" 104.50
3/4" 1-1/2" 3/4" 4" 97.50
7/8" 1-1/2" 7/8" 4" 149.50
1" 1-1/2" 1" 4" 152.00
Price Price
15.45
11.45
11.45
11.45
11.45
11.45
11.45
10.40
16.10
16.10
16.10
14.65
22.50
22.50
22.50
19.65
30.70
30.70
30.70
27.85
34.40
34.40
34.40
31.25
44.05
44.05
44.05
41.25
50.90
50.90
50.90
45.90
80.00
81.15
112.70
115.70
176.30
179.05
CuttingDiameter
ShankDiameter
4
Series 3215 NON COATED
Series 3215 TiN TiN COATED
Series 3215 TiCN TiCN COATED
Series 3215 TiAlN TiAlN COATED
Coated Tools
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
CuttingLength
O/ALength
SERIES 3215B
EDP NO.
30754
30755
30756
30757
30758
30759
30760
30761
30762
30763
30764
30765
30766
30767
30768
30769
30770
30771
30772
30773
30774
30775
30776
30777
30778
30779
30780
30781
30782
30783
30784
30785
30786
30787
30788
30789
30790
30791
1/64" 3/64" 1/8" 1-1/2" 15.90
1/32" 3/32" 1/8" 1-1/2" 11.10
3/64" 3/16" 1/8" 1-1/2" 11.10
1/16" 1/4" 1/8" 1-1/2" 11.10
5/64" 1/4" 1/8" 1-1/2" 11.10
3/32" 3/8" 1/8" 1-1/2" 11.10
7/64" 1/2" 1/8" 1-1/2" 11.10
1/8" 1/2" 1/8" 1-1/2" 9.75
9/64" 9/16" 3/16" 2" 15.90
5/32" 9/16" 3/16" 2" 15.90
11/64" 9/16" 3/16" 2" 15.90
3/16" 5/8" 3/16" 2" 14.15
13/64" 5/8" 1/4" 2-1/2" 20.25
7/32" 5/8" 1/4" 2-1/2" 20.25
15/64" 3/4" 1/4" 2-1/2" 20.25
1/4" 3/4" 1/4" 2-1/2" 16.70
17/64" 7/8" 5/16" 2-1/2" 27.55
9/32" 7/8" 5/16" 2-1/2" 27.55
19/64" 7/8" 5/16" 2-1/2" 27.55
5/16" 7/8" 5/16" 2-1/2" 24.00
21/64" 7/8" 3/8" 2-1/2" 32.20
11/32" 7/8" 3/8" 2-1/2" 32.20
23/64" 1" 3/8" 2-1/2" 32.20
3/8" 1" 3/8" 2-1/2" 28.25
25/64" 1" 7/16" 2-3/4" 41.75
13/32" 1" 7/16" 2-3/4" 41.75
27/64" 1" 7/16 2-3/4" 41.75
7/16" 1" 7/16" 2-3/4" 38.25
29/64" 1" 1/2" 3" 50.30
15/32" 1" 1/2" 3" 50.30
31/64" 1" 1/2" 3" 50.30
1/2" 1" 1/2" 3" 44.05
9/16" 1-1/4" 9/16" 3-1/2" 80.60
5/8" 1-1/2" 5/8" 3-1/2" 82.20
11/16" 1-1/2" 3/4" 4" 130.60
3/4" 1-1/2" 3/4" 4" 121.85
7/8" 1-1/2" 7/8" 4" 186.85
1" 1-1/2" 1" 4" 190.00
3215B
EDP NO.
3215B TiN
EDP NO.Price Price
3215B TiCN
EDP NO.
3215B TiAlN
17.30
12.50
12.50
12.50
12.50
12.50
12.50
11.25
17.75
17.75
17.75
16.00
23.95
23.95
23.95
20.40
33.05
33.05
33.05
29.50
37.70
37.70
37.70
33.75
50.60
50.60
50.60
47.10
59.15
59.15
59.15
52.90
90.50
92.10
142.35
133.60
204.10
207.25
18.10
13.30
13.30
13.30
13.30
13.30
13.30
12.05
18.75
18.75
18.75
17.00
26.00
26.00
26.00
22.45
36.20
36.20
36.20
32.65
40.85
40.85
40.85
36.90
54.40
54.40
54.40
50.90
62.95
62.95
62.95
56.70
96.00
97.60
148.80
140.05
213.65
216.80
30527
30528
30529
30530
30531
30532
30533
30534
30535
30536
30537
30538
30539
30540
30541
30542
30543
30544
30545
30546
30547
30548
30549
30550
30551
30552
30553
30554
30555
30556
30557
30558
30559
30560
30561
30562
30563
30564
30376
30377
30378
30379
30380
30381
30382
30383
30384
30385
30386
30387
30388
30389
30390
30391
30392
30393
30394
30395
30396
30397
30398
30399
30400
30401
30402
30403
30404
30405
30406
30407
30408
30409
30410
30411
30412
30413
32086
32087
32088
32089
32090
32091
32092
32093
32094
32095
32657
32096
32658
32097
32659
32098
32950
32099
32951
32100
32952
32101
32953
32102
32954
32905
32955
32103
32956
32915
32957
32104
32105
32106
32107
32108
32109
32110
Price Price
18.10
13.30
13.30
13.30
13.30
13.30
13.30
12.05
18.75
18.75
18.75
17.00
26.00
26.00
26.00
22.45
36.20
36.20
36.20
32.65
40.85
40.85
40.85
36.90
54.40
54.40
54.40
50.90
62.95
62.95
62.95
56.70
96.00
97.60
148.80
140.05
213.65
216.80
CuttingDiameter
ShankDiameter
5
Series 3215B NON COATED
Series 3215B TiN TiN COATED
Series 3215B TiCN TiCN COATED
Series 3215B TiAlN TiAlN COATED
Coated Tools
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
CuttingLength
O/ALength
SERIES 3300
3300
EDP NO.
3300 TiN
EDP NO.Price Price
3300 TiCN
EDP NO.
3300 TiAlN
EDP NO.
33002
33003
33004
33005
33006
33007
33008
33009
33010
32660
33011
32661
33012
32662
33013
32960
33014
32961
33015
32962
33016
32963
33017
32964
32902
32965
33018
32966
32912
32967
33019
33020
33021
33022
33023
33024
33025
10.65
10.65
10.65
10.65
10.65
10.65
9.60
15.10
15.10
15.10
13.65
20.45
20.45
20.45
17.60
27.55
27.55
27.55
24.70
31.25
31.25
31.25
28.10
40.25
40.25
40.25
37.45
47.10
47.10
47.10
42.10
74.40
75.65
116.25
109.25
166.75
169.25
30452
30453
30454
30455
30456
30457
30458
30459
30460
30461
30462
30463
30464
30465
30466
30467
30468
30469
30470
30471
30472
30473
30474
30475
30476
30477
30478
30479
30480
30481
30482
30483
30484
30485
30486
30487
30488
11.45
11.45
11.45
11.45
11.45
11.45
10.40
16.10
16.10
16.10
14.65
22.50
22.50
22.50
19.65
30.70
30.70
30.70
27.85
34.40
34.40
34.40
31.25
44.05
44.05
44.05
41.25
50.90
50.90
50.90
45.90
80.00
81.15
122.70
115.70
176.30
179.05
30301
30302
30303
30304
30305
30306
30307
30308
30309
30310
30311
30312
30313
30314
30315
30316
30317
30318
30319
30320
30321
30322
30323
30324
30325
30326
30327
30328
30329
30330
30331
30332
30333
30334
30335
30336
30337
30680
30681
30682
30683
30684
30685
30686
30687
30688
30689
30690
30691
30692
30693
30694
30695
30696
30697
30698
30699
30700
30701
30702
30703
30704
30705
30706
30707
30708
30709
30710
30711
30712
30713
30714
30715
30716
Price
1/32" 3/32" 1/8" 1-1/2" 9.25
3/64" 3/16" 1/8" 1-1/2" 9.25
1/16" 1/4" 1/8" 1-1/2" 9.25
5/64" 1/4" 1/8" 1-1/2" 9.25
3/32" 3/8" 1/8" 1-1/2" 9.25
7/64" 1/2" 1/8" 1-1/2" 9.25
1/8" 1/2" 1/8" 1-1/2" 8.20
9/64" 9/16" 3/16" 2" 13.25
5/32" 9/16" 3/16" 2" 13.25
11/64" 9/16" 3/16" 2" 13.25
3/16" 5/8" 3/16" 2" 11.80
13/64" 5/8" 1/4" 2-1/2" 16.75
7/32" 5/8" 1/4" 2-1/2" 16.75
15/64" 3/4" 1/4" 2-1/2" 16.75
1/4" 3/4" 1/4" 2-1/2" 13.90
17/64" 7/8" 5/16" 2-1/2" 22.05
9/32" 7/8" 5/16" 2-1/2" 22.05
19/64" 7/8" 5/16" 2-1/2" 22.05
5/16" 7/8" 5/16" 2-1/2" 19.20
21/64" 7/8" 3/8" 2-1/2" 25.75
11/32" 7/8" 3/8" 2-1/2" 25.75
23/64" 1" 3/8" 2-1/2" 25.75
3/8" 1" 3/8" 2-1/2" 22.60
25/64" 1" 7/16" 2-3/4" 33.40
13/32" 1" 7/16" 2-3/4" 33.40
27/64" 1" 7/16 2-3/4" 33.40
7/16" 1" 7/16" 2-3/4" 30.60
29/64" 1" 1/2" 3" 40.25
15/32" 1" 1/2" 3" 40.25
31/64" 1" 1/2" 3" 40.25
1/2" 1" 1/2" 3" 35.25
9/16" 1-1/4" 9/16" 3-1/2" 64.50
5/8" 1-1/2" 5/8" 3-1/2" 65.75
11/16" 1-1/2" 3/4" 4" 104.50
3/4" 1-1/2" 3/4" 4" 97.50
7/8" 1-1/2" 7/8" 4" 149.50
1" 1-1/2" 1" 4" 152.00
Price
11.45
11.45
11.45
11.45
11.45
11.45
10.40
16.10
16.10
16.10
14.65
22.50
22.50
22.50
19.65
30.70
30.70
30.70
27.85
34.40
34.40
34.40
31.25
44.05
44.05
44.05
41.25
50.90
50.90
50.90
45.90
80.00
81.15
122.70
115.70
176.30
179.05
CuttingDiameter
ShankDiameter
6
Series 3300 NON COATED
Series 3300 TiN TiN COATED
Series 3300 TiCN TiCN COATED
Series 3300 TiAlN TiAlN COATED
Coated Tools
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
CuttingDiameter
CuttingLength
ShankDiameter
O/ALength
SERIES 3300B
3300B
EDP NO.
3300B TiN
EDP NO.Price Price
3300B TiCN
EDP NO.
3300B TiAlN
EDP NO.
33030
33031
33032
33033
33034
33035
33036
33037
33038
32663
33039
32664
33040
32665
33041
32970
33042
32971
33043
32972
33044
32973
33045
32974
32906
32975
33046
32976
32916
32977
33047
33048
33049
33050
33051
33052
33053
12.50
12.50
12.50
12.50
12.50
12.50
11.25
17.75
17.75
17.75
16.00
23.95
23.95
23.95
20.40
33.05
33.05
33.05
29.50
37.70
37.70
37.70
33.75
50.60
50.60
50.60
47.10
59.15
59.15
59.15
52.90
90.50
92.10
142.35
133.60
204.10
207.25
30565
30566
30567
30568
30569
30570
30571
30572
30573
30574
30575
30576
30577
30578
30579
30580
30581
30582
30583
30584
30585
30586
30587
30588
30589
30590
30591
30592
30593
30594
30595
30596
30597
30598
30599
30600
30601
13.30
13.30
13.30
13.30
13.30
13.30
12.05
18.75
18.75
18.75
17.00
26.00
26.00
26.00
22.45
36.20
36.20
36.20
32.65
40.85
40.85
40.85
36.90
54.40
54.40
54.40
50.90
62.95
62.95
62.95
56.70
96.00
97.60
148.80
140.05
213.65
216.80
30414
30415
30416
30417
30418
30419
30420
30421
30422
30423
30424
30425
30426
30427
30428
30429
30430
30431
30432
30433
30434
30435
30436
30437
30438
30439
30440
30441
30442
30443
30444
30445
30446
30447
30448
30449
30450
30792
30793
30794
30795
30796
30797
30798
30799
30800
30801
30802
30803
30804
30805
30806
30807
30808
30809
30810
30811
30812
30813
30814
30815
30816
30817
30818
30819
30820
30821
30822
30823
30824
30825
30826
30827
30828
Price
1/32" 3/32" 1/8" 1-1/2" 11.10
3/64" 3/16" 1/8" 1-1/2" 11.10
1/16" 1/4" 1/8" 1-1/2" 11.10
5/64" 1/4" 1/8" 1-1/2" 11.10
3/32" 3/8" 1/8" 1-1/2" 11.10
7/64" 1/2" 1/8" 1-1/2" 11.10
1/8" 1/2" 1/8" 1-1/2" 9.85
9/64" 9/16" 3/16" 2" 15.90
5/32" 9/16" 3/16" 2" 15.90
11/64" 9/16" 3/16" 2" 15.90
3/16" 5/8" 3/16" 2" 14.15
13/64" 5/8" 1/4" 2-1/2" 20.25
7/32" 5/8" 1/4" 2-1/2" 20.25
15/64" 3/4" 1/4" 2-1/2" 20.25
1/4" 3/4" 1/4" 2-1/2" 16.70
17/64" 7/8" 5/16" 2-1/2" 27.55
9/32" 7/8" 5/16" 2-1/2" 27.55
19/64" 7/8" 5/16" 2-1/2" 27.55
5/16" 7/8" 5/16" 2-1/2" 24.00
21/64" 7/8" 3/8" 2-1/2" 32.20
11/32" 7/8" 3/8" 2-1/2" 32.20
23/64" 1" 3/8" 2-1/2" 32.20
3/8" 1" 3/8" 2-1/2" 28.25
25/64" 1" 7/16" 2-3/4" 41.75
13/32" 1" 7/16" 2-3/4" 41.75
27/64" 1" 7/16 2-3/4" 41.75
7/16" 1" 7/16" 2-3/4" 38.25
29/64" 1" 1/2" 3" 50.30
15/32" 1" 1/2" 3" 50.30
31/64" 1" 1/2" 3" 50.30
1/2" 1" 1/2" 3" 44.05
9/16" 1-1/4" 9/16" 3-1/2" 80.60
5/8" 1-1/2" 5/8" 3-1/2" 82.20
11/16" 1-1/2" 3/4" 4" 130.60
3/4" 1-1/2" 3/4" 4" 121.85
7/8" 1-1/2" 7/8" 4" 186.85
1" 1-1/2" 1" 4" 190.00
Price
13.30
13.30
13.30
13.30
13.30
13.30
12.05
18.75
18.75
18.75
17.00
26.00
26.00
26.00
22.45
36.20
36.20
36.20
32.65
40.85
40.85
40.85
36.90
54.40
54.40
54.40
50.90
62.95
62.95
62.95
56.70
96.00
97.60
148.80
140.05
213.65
216.80
7
Series 3300B NON COATED
Series 3300B TiN TiN COATED
Series 3300B TiCN TiCN COATED
Series 3300B TiAlN TiAlN COATED
Coated Tools
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
1/8" 1/2" 1/8" 1-1/2" 10.30 33700 33709 - - - - - 3/16" 5/8" 3/16" 2" 14.95 33701 33710 33718 - - - - 1/4" 3/4" 1/4" 2-1/2" 17.60 33702 33711 33719 33726 - - - 5/16" 7/8" 5/16" 2-1/2" 23.40 33703 33712 33720 33727 - - - 3/8" 1" 3/8" 2-1/2" 27.85 33704 33713 33721 33728 33733 - - 1/2" 1" 1/2" 3" 46.00 33705 33714 33722 33729 33734 33738 33742
5/8" 1-1/2" 5/8" 3-1/2" 78.20 33706 33715 33723 33730 33735 33739 - 3/4" 1-1/2" 3/4" 4" 112.50 33707 33716 33724 33731 33736 33740 33743
1" 1-1/2" 1" 4" 182.00 33708 33717 33725 33732 33737 33741 33744
1/8" 1/2" 1/8" 1-1/2" 10.30 33745 33754 - - - - - 3/16" 5/8" 3/16" 2" 14.95 33746 33755 33763 - - - - 1/4" 3/4" 1/4" 2-1/2" 17.60 33747 33756 33764 33771 - - - 5/16" 7/8" 5/16" 2-1/2" 23.40 33748 33757 33765 33772 - - - 3/8" 1" 3/8" 2-1/2" 27.85 33749 33758 33766 33773 33778 - - 1/2" 1" 1/2" 3" 46.00 33750 33759 33767 33774 33779 33783 33787
5/8" 1-1/2" 5/8" 3-1/2" 78.20 33751 33760 33768 33775 33780 33784 - 3/4" 1-1/2" 3/4" 4" 112.50 33752 33761 33769 33776 33781 33785 33788
1" 1-1/2" 1" 4" 182.00 33753 33762 33770 33777 33782 33786 33789
8
Note: TiN - TiCN - TiAlN Coating Available See Page 23
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
Price .015 RAD .020 RAD .030 RAD .045 RAD .060 RAD .090 RAD .125 RAD
Price
SERIES 3200R
SERIES 3215R
For Special Corner Radius See Page 31
EDP Numbers
EDP Numbers
.015 RAD .020 RAD .030 RAD .045 RAD .060 RAD .090 RAD .125 RAD
Four Flutes
Two Flutes
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
STA
ND
AR
D
EN
D M
ILLS
CuttingLength
O/ALength
3290
EDP NO.
3295
EDP NO.Price Price Cutting
DiameterShank
Diameter
1/32" 1/16" 1/8" 1-1/2" 8.30 32139
3/64" 1/8" 1/8" 1-1/2" 8.30 32140
1/16" 1/8" 1/8" 1-1/2" 8.30 32141
5/64" 1/8" 1/8" 1-1/2" 8.30 32142
3/32" 3/16" 1/8" 1-1/2" 8.30 32143
7/64" 3/16" 1/8" 1-1/2" 8.30 32144
1/8" 1/4" 1/8" 1-1/2" 7.70 32145
5/32" 3/8" 3/16" 2" 9.70 32146
3/16" 3/8" 3/16" 2" 9.70 32147
1/4" 1/2" 1/4" 2" 11.60 32148
5/16" 1/2" 5/16" 2-1/2" 17.20 32149
3/8" 5/8" 3/8" 2-1/2" 21.35 32150
7/16" 3/4" 7/16" 2-3/4" 29.40 32151
1/2" 3/4" 1/2" 3" 34.25 32152
5/8" 1" 5/8" 3-1/2" 63.50 32153
3/4" 1" 3/4" 4" 91.80 32154
1" 1" 1" 4" 143.35 32155
32113
32172
32173
32174
32175
32176
32177
32178
32179
32180
32181
32182
32183
32184
32185
32186
32187
8.30
8.30
8.30
8.30
8.30
8.30
7.70
9.70
9.70
11.60
17.20
21.35
29.40
34.25
63.50
91.80
143.35
Note: TiN - TiCN Coating Available See Page 23
32112
32156
32157
32158
32159
32160
32161
32162
32163
32164
32165
32166
32167
32168
32169
32170
32171
1/32" 1/16" 1/8" 1-1/2" 10.10
3/64" 1/8" 1/8" 1-1/2" 10.10
1/16" 1/8" 1/8" 1-1/2" 10.10
5/64" 1/8" 1/8" 1-1/2" 10.10
3/32" 3/16" 1/8" 1-1/2" 10.10
7/64" 3/16" 1/8" 1-1/2" 10.10
1/8" 1/4" 1/8" 1-1/2" 9.60
5/32" 3/8" 3/16" 2" 12.05
3/16" 3/8" 3/16" 2" 12.05
1/4" 1/2" 1/4" 2" 14.55
5/16" 1/2" 5/16" 2-1/2" 21.45
3/8" 5/8" 3/8" 2-1/2" 26.75
7/16" 3/4" 7/16" 2-3/4" 37.10
1/2" 3/4" 1/2" 3" 42.65
5/8" 1" 5/8" 3-1/2" 79.40
3/4" 1" 3/4" 4" 114.65
1" 1" 1" 4" 180.85
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
32114
32188
32189
32190
32191
32192
32193
32194
32195
32196
32197
32198
32199
32200
32201
32202
32203
10.10
10.10
10.10
10.10
10.10
10.10
9.60
12.05
12.05
14.55
21.45
26.75
37.10
42.65
79.40
114.65
180.85
SQUARE END
BALL END 3290B
EDP NO.
3295B
EDP NO.Price Price
9
Price EDP NO.
3290 TiAlN 3295 TiAlN
Price EDP NO.
3290B TiAlN
Price EDP No.
3295B TiAlN
Price EDP No.
SERIES 3290 NON COATED
SERIES 3290 TiAIN TiAIN COATED
10.50
10.50
10.50
10.50
10.50
10.50
9.90
12.55
12.55
15.65
25.85
30.00
40.05
44.90
78.90
110.00
170.15
32822
32823
32824
32825
32826
32827
32828
32829
32830
32831
32832
32833
32834
32835
32836
32837
32838
32839
32840
32841
32842
32843
32844
32845
32846
32847
32848
32849
32850
32851
32852
32853
32854
32855
10.50
10.50
10.50
10.50
10.50
10.50
9.90
12.55
12.55
15.65
25.85
30.00
40.05
44.90
78.90
110.00
170.15
12.30
12.30
12.30
12.30
12.30
12.30
11.80
14.90
14.90
18.60
30.10
35.40
47.75
53.30
94.80
132.85
207.65
12.30
12.30
12.30
12.30
12.30
12.30
11.80
14.90
14.90
18.60
30.10
35.40
47.75
53.30
94.80
132.85
207.65
32864
32865
32866
32867
32868
32869
32870
32871
32872
32873
32874
32875
32876
32877
32878
32879
32880
32881
32882
32883
32884
32885
32886
32887
32888
32889
32890
32891
32892
32893
32894
32895
32896
32897
Four Flutes
SERIES 3295 NON COATED
SERIES 3295 TiAIN TiAIN COATED
Two Flutes
SERIES 3290B NON COATED
SERIES 3290B TiAIN TiAIN COATED
Four Flutes • Ball End
SERIES 3295B NON COATED
SERIES 3295B TiAIN TiAIN COATED
Two Flutes • Ball End
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
Square End Ball End
CuttingLength
O/ALength
3200XL
EDP NO.
3200XLB
EDP NO.Price Price
1/8" 3/4" 1/8" 3" 17.30 30232
1/8" 1" 1/8" 3" 17.30 32252
3/16" 1-1/4" 3/16" 3" 18.50 32253
3/16” 1” 3/16” 4” 20.25 30238
1/4" 1-1/8" 1/4" 3" 21.90 32550
1/4" 1" 1/4" 4" 24.20 30200
1/4" 1-1/2" 1/4" 4" 25.40 32254
1/4" 1-1/2" 1/4" 6" 34.75 32551
5/16" 1-1/8" 5/16" 3" 26.25 32574
5/16" 1" 5/16" 4" 29.40 30201
5/16" 1-5/8" 5/16" 4" 31.25 32255
5/16" 1-1/2" 5/16" 6" 45.35 32552
3/8" 1-1/8" 3/8" 3" 30.25 32578
3/8" 1" 3/8" 4" 33.50 30202
3/8" 1-1/2" 3/8" 4" 35.30 30220
3/8" 2" 3/8" 4" 36.75 32256
3/8" 1-1/2" 3/8" 6" 49.40 32553
3/8" 3" 3/8" 6" 51.75 32257
7/16" 1" 7/16" 4" 46.70 30203
7/16" 2" 7/16" 4" 50.85 32258
7/16" 1-1/2" 7/16" 6" 65.65 32554
7/16" 3" 7/16" 6" 73.15 32259
1/2” 1-1/4” 1/2” 3 39.50 30239
1/2" 1" 1/2" 4" 47.95 30204
1/2" 1-1/2" 1/2" 4" 48.80 32582
1/2" 2" 1/2" 4" 52.95 32260
1/2" 1-1/2" 1/2" 6" 71.75 32555
1/2" 3" 1/2" 6" 75.50 32261
5/8" 2-1/2" 5/8" 5" 101.15 32262
5/8" 1-1/2" 5/8" 6" 108.65 30224
5/8" 3" 5/8" 6" 113.05 32263
3/4" 2-1/2" 3/4" 5" 147.35 32264
3/4" 1-1/2" 3/4" 6" 167.40 30226
3/4" 3" 3/4" 6" 176.45 32265
3/4" 4" 3/4" 7" 234.70 32266
1" 2" 1" 4-1/2" 253.20 32267
1" 2-1/2" 1" 5" 260.50 32268
1" 3" 1" 6" 272.00 32269
1" 4" 1" 7" 365.10 32270
1-1/4" 3" 1-1/4" 6" 622.55 32271
19.25
19.25
21.30
24.70
25.20
27.50
28.70
38.05
30.80
33.95
35.80
49.90
35.85
39.10
40.90
42.35
55.00
57.35
54.00
58.15
72.95
80.45
48.10
56.55
57.40
61.55
80.35
84.10
117.30
124.80
129.20
170.20
190.25
199.30
259.55
291.45
298.75
310.25
403.35
744.35
30235
32272
32273
30240
32556
30205
32274
32557
32575
30206
32275
32558
32579
30207
30221
32276
32559
32277
30208
32278
32560
32279
30241
30209
32583
32280
32561
32281
32282
30228
32283
32284
30230
32285
32286
32287
32288
32289
32290
32291
Note: TiN - TiCN Coating Available See Page 23
CuttingDiameter
ShankDiameter
10
NEW
NEW
SERIES 3200XL NON COATED
SERIES 3200XL TiAIN TiAIN COATED
20.15
20.15
22.85
24.60
27.65
31.00
32.20
44.30
34.90
40.40
42.25
60.40
38.90
44.50
46.30
47.75
64.45
66.80
60.45
64.60
85.00
92.50
50.15
61.70
62.55
66.70
91.10
94.85
120.40
131.50
135.90
169.70
193.85
202.90
264.95
284.00
291.30
306.40
403.35
--
30030
30031
30032
30033
30034
30035
30036
30037
30038
30039
30040
30041
30042
30043
30044
30045
30046
30047
30048
30049
30050
30051
30052
30053
30054
30055
30056
30057
30058
30059
30060
30061
30062
30063
30064
30065
30066
30067
30068
--
3200XL TiAlN
EDP No.Price EDP No.Price
30069
30070
30071
30072
30073
30074
30075
30076
30077
30078
30079
30080
30081
30082
30083
30084
30085
30086
30087
30088
30089
30090
30091
30092
30093
30094
30095
30096
30097
30098
30099
30100
30101
30102
30103
30104
30105
30106
30107
--
22.10
22.10
25.65
29.05
33.85
38.50
39.70
53.10
39.45
44.95
46.80
64.95
44.50
50.10
51.90
53.35
70.05
72.40
67.75
71.90
92.30
99.80
61.85
70.30
71.15
75.30
99.70
103.45
136.55
147.65
152.05
192.55
216.70
225.75
287.80
322.25
329.55
344.65
441.60
--
3200XLB TiAlN
SERIES 3200XLB NON COATED
SERIES 3200XLB TiAIN TiAIN COATED
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
Square End Ball End
CuttingLength
O/ALength
3215XL
EDP No.
3215XLB
EDP No.Price Price
1/8" 3/4" 1/8" 3" 17.30 30233
1/8" 1" 1/8" 3" 17.30 32292
3/16" 1-1/4" 3/16" 3" 18.50 32293
3/16” 1” 3/16” 4” 20.25 30242
1/4" 1-1/8" 1/4" 3" 21.90 32562
1/4" 1" 1/4" 4" 24.20 30210
1/4" 1-1/2" 1/4" 4" 25.40 32294
1/4" 1-1/2" 1/4" 6" 34.75 32563
5/16" 1-1/8" 5/16" 3" 26.25 32576
5/16" 1" 5/16" 4" 29.40 30211
5/16" 1-5/8" 5/16" 4" 31.25 32295
5/16" 1-1/2" 5/16" 6" 45.35 32564
3/8" 1-1/8" 3/8" 3" 30.25 32580
3/8" 1" 3/8" 4" 33.50 30212
3/8" 1-1/2" 3/8" 4" 35.30 30222
3/8" 2" 3/8" 4" 36.75 32296
3/8" 1-1/2" 3/8" 6" 49.40 32565
3/8" 3" 3/8" 6" 51.75 32297
7/16" 1" 7/16" 4" 46.70 30213
7/16" 2" 7/16" 4" 50.85 32298
7/16" 1-1/2" 7/16" 6" 65.65 32566
7/16" 3" 7/16" 6" 73.15 32299
1/2" 1" 1/2" 4" 47.95 30214
1/2" 1-1/2" 1/2" 4" 48.80 32584
1/2" 2" 1/2" 4" 52.95 32300
1/2" 1-1/2" 1/2" 6" 71.75 32567
1/2" 3" 1/2" 6" 75.50 32301
5/8" 2-1/2" 5/8" 5" 101.15 32302
5/8" 1-1/2" 5/8" 6" 108.65 30225
5/8" 3" 5/8" 6" 113.05 32303
3/4" 2-1/2" 3/4" 5" 147.35 32304
3/4" 1-1/2" 3/4" 6" 167.40 30227
3/4” 3” 3/4” 6” 176.45 32305
1" 2" 1" 4-1/2" 253.20 32306
1" 2-1/2" 1" 5" 260.50 32307
1" 3" 1" 6" 272.00 32308
19.25
19.25
21.30
24.70
25.20
27.50
28.70
38.05
30.80
33.95
35.80
49.90
35.85
39.10
40.90
42.35
55.00
57.35
54.00
58.15
72.95
80.45
56.55
57.40
61.55
80.35
84.10
117.30
124.80
129.20
170.20
190.25
199.30
291.45
298.75
310.25
30236
32309
32310
30244
32568
30215
32311
32569
32577
30216
32312
32570
32581
30217
30223
32313
32571
32314
30218
32315
32572
32316
30219
32585
32317
32573
32318
32319
30229
32320
32321
30231
32322
32323
32324
32325
CuttingDiameter
ShankDiameter
Note: TiN - TiCN Coating Available See Page 23
11
NEW
SERIES 3215XL NON COATED
SERIES 3215XL TiAIN TiAIN COATED
20.15
20.15
22.85
24.60
27.65
31.00
32.20
44.30
34.90
40.40
42.25
60.40
38.90
44.50
46.30
47.75
64.45
66.80
60.45
64.60
85.00
92.50
61.70
62.55
66.70
91.10
94.85
120.40
131.50
135.90
169.70
193.85
202.90
284.00
291.30
306.40
30108
30109
30110
30111
30112
30113
30114
30115
30116
30117
30118
30119
30120
30121
30122
30123
30124
30125
30126
30127
30128
30129
30130
30131
30132
30133
30134
30135
30136
30137
30138
30139
30140
30141
30142
30143
3215XL TiAlN
EDP No.Price EDP No.Price
30144
30145
30146
30147
30148
30149
30150
30151
30152
30153
30154
30155
30156
30157
30158
30159
30160
30161
30162
30163
30164
30165
30166
30167
30168
30169
30170
30171
30172
30173
30174
30175
30176
30177
30178
30179
22.10
22.10
25.65
29.05
33.85
38.50
39.70
53.10
39.45
44.95
46.80
64.95
44.50
50.10
51.90
53.35
70.05
72.40
67.75
71.90
92.30
99.85
70.30
71.15
75.30
99.70
103.45
136.55
147.65
152.05
192.55
216.70
225.75
322.25
329.55
344.65
3215XLB TiAlN
SERIES 3215XLB NON COATED
SERIES 3215XLB TiAIN TiAIN COATED
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
CuttingLength
O/ALength
3300XL
EDP NO.
3300XLB
EDP NO.Price Price
1/8" 3/4" 1/8" 3" 17.30 30234
1/8" 1" 1/8" 3" 17.30 33059
3/16" 1-1/4" 3/16" 3" 18.50 33060
3/16” 1” 3/16” 4” 20.25 30246
1/4" 1-1/2" 1/4" 4" 25.40 33061
5/16" 1-5/8" 5/16" 4" 31.25 33062
3/8" 2" 3/8" 4" 36.75 33063
3/8" 3" 3/8" 6" 51.75 33064
7/16" 2" 7/16" 4" 50.85 33065
7/16" 3" 7/16" 6" 73.15 33066
1/2” 1-1/4” 1/2” 3” 39.50 30247
1/2" 1-1/2" 1/2" 4" 48.80 32598
1/2" 2" 1/2" 4" 52.95 33067
1/2" 3" 1/2" 6" 75.50 33068
5/8" 2-1/2" 5/8" 5" 101.15 33079
3/4" 2-1/2" 3/4" 5" 147.35 33080
19.25
19.25
21.30
24.70
28.70
35.80
42.35
57.35
58.15
80.45
48.10
56.55
61.55
84.10
117.30
170.20
30237
33069
33070
30248
33071
33072
33073
33074
33075
33076
30249
32599
33077
33078
33089
33090
Note: TiN - TiCN Coating Available See Page 23
CuttingDiameter
ShankDiameter
12
3300XL TiAIN
EDP NO.Price
3300XLB TiAIN
EDP NO.Price
22.10
22.10
25.65
29.05
39.70
46.80
53.35
72.40
71.90
99.80
61.85
70.30
75.30
103.45
136.55
192.55
30195
30196
30197
30198
30199
30000
30001
30002
30003
30004
30005
30006
30007
30008
30009
30012
20.15
20.15
22.85
24.60
32.20
42.25
47.75
66.80
64.60
92.50
50.15
62.55
66.70
94.85
120.45
169.70
30011
30180
30181
30182
30183
30184
30185
30186
30187
30188
30189
30190
30191
30192
30193
30194
NEW
NEW
SERIES 3300XL NON COATED
SERIES 3300XL TiAIN TiAIN COATED
SERIES 3300XLB NON COATED
SERIES 3300XLB TiAIN TiAIN COATED
Square End Ball End
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .001 - .000
Shank Diameters: -.0001 - .0004
CuttingLength
O/ALength
3700
EDP NO.
3715
EDP No.Price Price Cutting
DiameterShank
Diameter
SERIES 3715SERIES 3700
39248
39250
39252
39254
39256
39258
39260
39262
39264
39266
39268
39270
10.40
10.40
9.95
14.40
17.30
26.75
30.10
43.50
45.15
80.50
115.25
200.10
SQUARE END
Note: TiN - TiCN - TiAlN Coating Available See Page 23
1/16" 3/16" 1/8" 1-1/2" 10.40 39200
3/32" 3/8" 1/8" 1-1/2" 10.40 39202
1/8" 1/2" 1/8" 1-1/2" 9.95 39204
3/16" 5/8" 3/16" 2" 14.40 39206
1/4" 3/4" 1/4" 2-1/2" 17.30 39208
5/16" 13/16" 5/16" 2-1/2" 26.75 39210
3/8" 1" 3/8" 2-1/2" 30.10 39212
7/16" 1" 7/16" 2-3/4" 43.50 39214
1/2" 1" 1/2" 3" 45.15 39216
5/8" 1-1/2" 5/8" 3-1/2" 80.50 39218
3/4" 1-1/2" 3/4" 4" 115.25 39220
1" 1-1/2" 1" 4" 200.10 39222
1/16" 3/16" 1/8" 1-1/2" 12.35
3/32" 3/8" 1/8" 1-1/2" 12.35
1/8" 1/2" 1/8" 1-1/2" 11.80
3/16" 5/8" 3/16" 2" 17.30
1/4" 3/4" 1/4" 2-1/2" 20.75
5/16" 13/16" 5/16" 2-1/2" 32.10
3/8" 1" 3/8" 2-1/2" 36.10
7/16" 1" 7/16" 2-3/4" 52.20
1/2" 1" 1/2" 3" 54.15
5/8" 1-1/2" 5/8" 3-1/2" 96.60
3/4" 1-1/2" 3/4" 4" 138.40
1" 1-1/2" 1" 4" 240.00
CuttingLength
O/ALength
3700B
EDP NO.
3715B
EDP No.Price Price
CuttingDiameter
ShankDiameter
BALL END
39272
39274
39276
39278
39280
39282
39284
39286
39288
39290
39292
39294
12.35
12.35
11.80
17.30
20.75
32.10
36.10
52.20
54.15
96.60
138.40
240.00
39224
39226
39228
39230
39232
39234
39236
39238
39240
39242
39244
39246
SERIES 3715BSERIES 3700B
13
Four Flutes Two Flutes
Four Flutes • Ball End Two Flutes • Ball End
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .0 - .05mm
Shank Diameters: +.0 - .0127
CuttingLength
O/ALength
9200
EDP NO.
9215
EDP NO.Price Price Cutting
DiameterShank
DiameterDec.
Equiv.
Note: TiN - TiCN - TiAlN Coating Available See Page 23
SERIES 9215
14
SERIES 9200
.1181 3.0 6.0 3.0 38 7.85 92100
.2362 6.0 12.0 6.0 50 15.10 92102
.3150 8.0 12.0 8.0 50 23.15 92104
.3937 10.0 15.0 10.0 50 39.25 92106
.4724 12.0 15.0 12.0 63 34.50 92108
.0394 1.0 4.0 3.0 38 10.95 92001
.0591 1.5 6.0 3.0 38 9.35 92002
.0787 2.0 8.0 3.0 38 9.35 92003
.0984 2.5 12.0 3.0 38 9.35 92005
.1181 3.0 12.0 3.0 38 9.35 92006
.1378 3.5 12.0 4.0 50 13.05 92073
.1575 4.0 14.0 4.0 50 13.05 92007
.1772 4.5 14.0 5.0 50 16.60 92075
.1969 5.0 16.0 5.0 63 16.60 92008
.2362 6.0 20.0 6.0 63 16.45 92009
.2756 7.0 22.0 7.0 63 24.20 92010
.3150 8.0 22.0 8.0 63 26.25 92011
.3543 9.0 22.0 9.0 63 28.20 92012
.3937 10.0 25.0 10.0 63 38.80 92013
.4331 11.0 25.0 11.0 75 40.80 92077
.4724 12.0 25.0 12.0 75 41.70 92014
.5512 14.0 32.0 14.0 89 68.90 92015
.6299 16.0 38.0 16.0 89 79.50 92016
.7087 18.0 40.0 18.0 100 109.70 92017
.7874 20.0 40.0 20.0 100 134.50 92018
.8661 22.0 40.0 22.0 100 141.25 92079
.9843 25.0 40.0 25.0 100 168.00 92081
.1181 3.0 25.0 3.0 76 15.75 92120
.2362 6.0 29.0 6.0 76 23.75 92122
.3150 8.0 29.0 8.0 76 32.50 92124
.3937 10.0 45.0 10.0 101 55.80 92126
.4724 12.0 50.0 12.0 101 57.00 92128
92037
92038
92039
92041
92042
92083
92043
92085
92044
92045
92046
92047
92048
92049
92087
92050
92051
92052
92053
92054
92089
92091
92140
92142
92144
92146
92148
92160
92162
92164
92166
92168
10.95
9.35
9.35
9.35
9.35
13.05
13.05
16.60
16.60
16.45
24.20
26.25
28.20
38.80
40.80
41.70
68.90
79.50
109.70
134.50
141.25
168.00
STANDARD LENGTH
STUB LENGTH SERIES 9290 Four Flutes • SERIES 9295 Two Flutes
EXTRA LONG LENGTH SERIES 9200XL Four Flutes • SERIES 9215XL Two Flutes
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
Dec.Equiv.
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
Dec.Equiv.
9290
EDP NO.
9295
EDP NO.Price Price
7.85
15.10
23.15
39.25
34.50
9200XL
EDP NO.
9215XL
EDP NO.Price Price
15.75
23.75
32.50
55.80
57.00
Four Flutes Two Flutes
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .0 - .05mm
Shank Diameters: +.0 - .0127
STA
ND
AR
D
EN
D M
ILLS
CuttingLength
O/ALength
9200B
EDP No.
9215B
EDP No.Price Price Cutting
DiameterShank
DiameterDec.
Equiv.
Note: TiN - TiCN - TiAlN Coating Available See Page 23
92055
92056
92057
92059
92060
92084
92061
92086
92062
92063
92064
92065
92066
92067
92088
92068
92069
92070
92071
92072
92090
92092
92150
92152
92154
92156
92158
92170
92172
92174
92176
92178
13.30
11.65
11.65
11.65
11.25
17.05
17.05
19.65
19.65
20.50
28.85
31.30
32.35
46.50
48.95
50.05
82.65
95.40
131.65
168.00
176.50
210.00
STANDARD LENGTH
STUB LENGTH SERIES 9290B Four Flutes • SERIES 9295B Two Flutes
EXTRA LONG LENGTH SERIES 9200XLB Four Flutes • SERIES 9215XLB Two Flutes
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
Dec.Equiv.
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
Dec.Equiv.
9290B
EDP No.
9295B
EDP No.Price Price
9.80
18.85
28.80
44.30
47.05
9200XLB
EDP No.
9215XLB
EDP No.Price Price
21.35
29.85
46.95
64.60
71.75
SERIES 9215BSERIES 9200B
15
.0394 1.0 4.0 3.0 38 13.30
.0591 1.5 6.0 3.0 38 11.65
.0787 2.0 8.0 3.0 38 11.65
.0984 2.5 12.0 3.0 38 11.65
.1181 3.0 12.0 3.0 38 11.25
.1378 3.5 12.0 4.0 50 17.05
.1575 4.0 14.0 4.0 50 17.05
.1772 4.5 14.0 5.0 50 19.65
.1969 5.0 16.0 5.0 63 19.65
.2362 6.0 20.0 6.0 63 20.50
.2756 7.0 22.0 7.0 63 28.85
.3150 8.0 22.0 8.0 63 31.30
.3543 9.0 22.0 9.0 63 32.35
.3937 10.0 25.0 10.0 63 46.50
.4331 11.0 25.0 11.0 75 48.95
.4724 12.0 25.0 12.0 75 50.05
.5512 14.0 32.0 14.0 89 82.65
.6299 16.0 38.0 16.0 89 95.40
.7087 18.0 40.0 18.0 100 131.65
.7874 20.0 40.0 20.0 100 168.00
.8661 22.0 40.0 22.0 100 176.50
.9843 25.0 40.0 25.0 100 210.00
.1181 3.0 6.0 3.0 38 9.80
.2362 6.0 12.0 6.0 50 18.85
.3150 8.0 12.0 8.0 50 28.80
.3937 10.0 15.0 10.0 50 44.30
.4724 12.0 15.0 12.0 63 47.05
.1181 3.0 25.0 3.0 76 21.35
.2362 6.0 29.0 6.0 76 29.85
.3150 8.0 29.0 8.0 76 46.95
.3937 10.0 45.0 10.0 101 64.60
.4724 12.0 50.0 12.0 101 71.75
92019
92020
92021
92023
92024
92074
92025
92076
92026
92027
92028
92029
92030
92031
92078
92032
92033
92034
92035
92036
92080
92082
92110
92112
92114
92116
92118
92130
92132
92134
92136
92138
Four Flutes Two Flutes
TOLERANCES: Diameters: +.0005 - .0005
SERIES 3215SM • Flute Length = 3x Diameter
SERIES 3200SMB • Flute Length = 3x Diameter
SERIES 3215SMS • Flute Length = 1.5x Diameter
SERIES 3200SM • Flute Length = 3x Diameter
SERIES 3215SMB • Flute Length = 3x Diameter
SERIES 3215SMSB • Flute Length = 1.5x Diameter
.005 15.75
.006 15.75
.007 15.60
.008 15.60
.009 15.50
.010 15.50
.011 15.50
.012 15.50
.013 15.50
.014 15.50
.015 15.50
.016 15.25
.017 15.25
.018 15.00
.019 15.00
.020 15.00
.021 15.00
.022 14.80
.023 14.80
.024 14.80
.025 14.00
.026 14.00
.027 12.50
.028 12.50
.029 12.50
.030 12.50
All Items Below The Cutting Length is 3x Cutting Diameter.
*DURA-CARB II is a super fine grade carbide with a transverse rupture strength in excess of 500,000.
32609
32668
32669
32698
32699
32670
32671
32672
32673
32674
32675
32676
32677
32678
32679
32680
32681
32697
32682
32683
32684
32685
32686
32687
32688
32689
19.65
19.65
19.50
19.50
19.35
19.35
19.35
19.35
19.35
19.35
19.35
19.05
19.05
18.75
18.75
18.75
18.75
18.50
18.50
18.50
18.10
18.10
15.60
15.60
15.60
15.60
32540
32541
32542
32543
32544
32352
32353
32354
32355
32356
32357
32358
32359
32360
32361
32362
32363
32364
32365
32366
32367
32368
32369
32370
32371
32372
-
-
-
-
-
30935
30936
30937
30938
30939
30940
30941
30942
30943
30944
30945
30946
30947
30948
30949
30950
30951
30952
30953
30954
30955
-
-
-
-
-
30900
30901
30902
30903
30904
30905
30906
30907
30908
30909
30910
30911
30912
30913
30914
30915
30916
30917
30918
30919
30920
19.65
19.65
19.50
19.50
19.35
19.35
19.35
19.35
19.35
19.35
19.35
19.05
19.05
18.75
18.75
18.75
18.75
18.50
18.50
18.50
18.10
18.10
15.60
15.60
15.60
15.60
15.75
15.75
15.60
15.60
15.50
15.50
15.50
15.50
15.50
15.50
15.50
15.25
15.25
15.00
15.00
15.00
15.00
14.80
14.80
14.80
14.00
14.00
12.50
12.50
12.50
12.50
3215SM
EDP NO.Price
3215SMS
EDP NO.Price
3215SMB
EDP NO.Price
3215SMSB
EDP NO.Price
CuttingDiameter
16
Square End Ball End
.031 10.25
.035 10.00
.040 9.75
.047 9.50
.050 9.50
.055 9.50
.060 9.50
30963
30964
30965
30966
30967
30968
30969
12.80
12.50
12.20
11.85
11.85
11.85
11.85
30928
30929
30930
30931
30932
30933
30934
30956
30957
30958
30959
30960
30961
30962
30921
30922
30923
30924
30925
30926
30927
12.80
12.50
12.20
11.85
11.85
11.85
11.85
10.25
10.00
9.75
9.50
9.50
9.50
9.50
3215SM
EDP NO.Price
3200SM
EDP NO.Price
3215SMB
EDP NO.Price
3200SMB
EDP NO.Price
CuttingDiameter
Square End Ball End
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
SERIES 3278
CuttingLength
O/ALength
CuttingDiameter
Shank Diameter
1/16” 3/16” 1/8” 2”
3/32” 3/8” 1/8” 2”
1/8” 3/8” 1/8” 2”
5/32” 7/16” 3/16” 3”
3/16” 1/2” 3/16” 3”
7/32” 9/16” 1/4” 3”
1/4” 5/8” 1/4” 3”
5/16” 3/4” 5/16” 3”
3/8” 3/4” 3/8” 3-1/2”
7/16” 7/8” 7/16” 4”
1/2” 1” 1/2” 4”
18.10 32387
18.10 32388
15.80 32389
21.60 32390
20.55 32391
25.65 32392
24.55 32393
35.50 32395
38.20 32397
49.20 32398
53.00 32399
18.10 32413
18.10 32414
15.80 32415
21.60 32416
20.55 32417
25.65 32418
24.55 32419
35.50 32421
38.20 32423
49.20 32424
53.00 32425
3278
EDP NO.Price
3282
EDP NO.Price
3278B
EDP NO.Price
3282B
EDP NO.Price CuttingLength
O/ALength
Cutting Diameter
Shank Diameter
1/16” 3/16” 1/8” 2”
3/32” 3/8” 1/8” 2”
1/8” 3/8” 1/8” 2”
5/32” 7/16” 3/16” 3”
3/16” 1/2” 3/16” 3”
7/32” 9/16” 1/4” 3”
1/4” 5/8” 1/4” 3”
5/16” 3/4” 5/16” 3”
3/8” 3/4” 3/8” 3-1/2”
7/16” 7/8” 7/16” 4”
1/2” 1” 1/2” 4”
32426
32427
32428
32429
32430
32431
32432
32434
32436
32437
32438
22.65
22.65
19.80
27.00
25.70
31.30
30.05
43.75
49.15
61.45
66.90
22.65
22.65
19.80
27.00
25.70
31.30
30.05
43.75
49.15
61.45
66.90
32400
32401
32402
32403
32404
32405
32406
32408
32410
32411
32412
Square End
SERIES 3282
SERIES 3278B
Ball End
SERIES 3282B
17
Note: TiN - TiCN - TiAlN Coating Available See Page 23
Four Flutes Two Flutes
Four Flutes • Ball End Two Flutes • Ball End
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
CuttingLength
O/ALength
CuttingDiameter
Shank Diameter
3260
Price
3265
EDP No.
Square End
1/32” 3/32” 1/8” 1-1/2”
3/64” 1/8” 1/8” 1-1/2”
1/16” 1/8” 1/8” 1-1/2”
5/64” 1/8” 1/8” 1-1/2”
3/32” 3/16” 1/8” 1-1/2”
7/64” 3/16” 1/8” 1-1/2”
1/8” 1/4” 1/8” 1-1/2”
9/64” 5/16” 3/16” 2”
5/32” 5/16” 3/16” 2”
11/64” 5/16” 3/16” 2”
3/16” 3/8” 3/16” 2”
13/64” 1/2” 1/4” 2-1/2”
7/32” 1/2” 1/4” 2-1/2”
15/64” 1/2” 1/4” 2-1/2”
1/4” 1/2” 1/4” 2-1/2”
9/32” 1/2” 5/16” 2-1/2”
5/16” 1/2” 5/16” 2-1/2”
3/8” 9/16” 3/8” 2-1/2”
7/16” 5/8” 7/16” 2-3/4”
1/2” 5/8” 1/2” 3”
1/32” 3/32” 1/8” 1-1/2” 19.70 32452
3/64” 1/8” 1/8” 1-1/2” 19.70 32453
1/16” 1/8” 1/8” 1-1/2” 19.70 32454
5/64” 1/8” 1/8” 1-1/2” 19.70 32531
3/32” 3/16” 1/8” 1-1/2” 19.70 32455
7/64” 3/16” 1/8” 1-1/2” 19.70 32532
1/8” 1/4” 1/8” 1-1/2” 14.80 32456
9/64” 5/16” 3/16” 2” 24.75 32546
5/32” 5/16” 3/16” 2” 24.75 32457
11/64” 5/16” 3/16” 2” 24.75 32547
3/16” 3/8” 3/16” 2” 22.40 32458
13/64” 1/2” 1/4” 2-1/2” 30.45 32548
7/32” 1/2” 1/4” 2-1/2” 30.45 32459
15/64” 1/2” 1/4” 2-1/2” 30.45 32549
1/4” 1/2” 1/4” 2-1/2” 27.05 32460
9/32” 1/2” 5/16” 2-1/2” 34.80 32596
5/16” 1/2” 5/16” 2-1/2” 34.80 32461
3/8” 9/16” 3/8” 2-1/2” 36.55 32462
7/16” 5/8” 7/16” 2-3/4” 56.05 32463
1/2” 5/8” 1/2” 3” 63.05 32464
22.35 36041
22.35 36042
22.35 36043
22.35 36044
22.35 36045
22.35 36046
18.10 36047
29.00 36048
29.00 36049
29.00 36050
26.65 36051
39.10 36052
39.10 36053
39.10 36054
35.70 36055
47.75 36056
47.75 36057
49.45 36058
72.00 36059
79.00 36060
CuttingLength
O/ALength
CuttingDiameter
Shank Diameter
3260B 3265B
Ball End
18
Price EDP No.
Note: TiN & TiCN Coating available. See pg. 23.
20.10 36001
20.10 36002
20.10 36003
20.10 36004
20.10 36005
20.10 36006
15.20 36007
26.00 36008
26.00 36009
26.00 36010
22.15 36011
33.00 36012
33.00 36013
33.00 36014
30.30 36015
40.80 36016
40.80 36017
42.40 36018
60.75 36019
66.35 36020
3260 TiAlN
Price EDP No.
3265 TiAlN
Price EDP No.
20.10 36021
20.10 36022
20.10 36023
20.10 36024
20.10 36025
20.10 36026
15.20 36027
26.00 36028
26.00 36029
26.00 36030
22.15 36031
33.00 36032
33.00 36033
33.00 36034
30.30 36035
40.80 36036
40.80 36037
42.40 36038
60.75 36039
66.35 36040
16.80 32465
16.80 32466
16.80 32467
16.80 32533
16.80 32468
16.80 32534
11.90 32469
21.75 32586
21.75 32470
21.75 32587
17.90 32471
21.35 32588
21.35 32472
21.35 32589
21.65 32473
27.85 32595
27.85 32474
29.45 32475
44.80 32476
50.40 32477
3260B TiAlN 3265B TiAlN
19.70 32478
19.70 32479
19.70 32480
19.70 32535
19.70 32481
19.70 32536
14.80 32482
24.75 32590
24.75 32483
24.75 32591
22.40 32484
30.45 32592
30.45 32485
30.45 32593
27.05 32486
34.80 32597
34.80 32487
36.55 32488
56.05 32489
63.05 32490
22.35 36061
22.35 36062
22.35 36063
22.35 36064
22.35 36065
22.35 36066
18.10 36067
29.00 36068
29.00 36069
29.00 36070
26.65 36071
39.10 36072
39.10 36073
39.10 36074
35.70 36075
47.75 36076
47.75 36077
49.45 36078
72.00 36079
79.00 36080
SERIES 3260B NON COATED
SERIES 3260B TiAIN TiAIN COATED
SERIES 3260 NON COATED
SERIES 3260 TiN TiN COATED
SERIES 3260 TiAIN TiAIN COATED
Four Flutes
SERIES 3265 NON COATED
SERIES 3265 TiN TiN COATED
SERIES 3265 TiAIN TiAIN COATED
Two Flutes
Four Flutes • Ball End
SERIES 3265B NON COATED
SERIES 3265B TiAIN TiAIN COATED
Two Flutes • Ball End
Price EDP No. Price EDP No.Price EDP No. Price EDP No.
Price EDP No.
18.85 32700
18.85 32701
18.85 32702
18.85 32860
18.85 32703
18.85 32861
13.95 32704
-- --
24.50 32705
-- --
20.65 32706
-- --
29.95 32707
-- --
27.25 32708
-- --
36.15 32709
37.75 32710
55.05 32711
60.65 32712
3260 TiN
Price EDP No.
18.85 32713
18.85 32714
18.85 32715
18.85 32862
18.85 32716
18.85 32863
13.95 32717
-- --
24.50 32718
-- --
20.65 32719
-- --
29.95 32720
-- --
27.25 32721
-- --
36.15 32722
37.75 32723
55.05 32724
60.65 32725
3265 TiN
16.80 32439
16.80 32440
16.80 32441
16.80 32519
16.80 32442
16.80 32530
11.90 32443
21.75 32537
21.75 32444
21.75 32538
17.90 32445
21.35 32539
21.35 32446
21.35 32545
21.65 32447
27.85 32594
27.85 32448
29.45 32449
44.80 32450
50.40 32451
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
Shank Diameters: +.0000 - .0005
SERIES 3221
CuttingLength
O/ALength
CuttingDiameter
Shank Diameter
3221
Price
3225
EDP No.
Square End
SERIES 3225
1/8” 3/8” 3/8” 3-1/2” 50.80 32491 32505
5/32” 7/16” 3/8” 3-1/2” 50.80 32492 32506
3/16” 1/2” 3/8” 3-1/2” 50.80 32493 32507
7/32” 9/16” 3/8” 3-1/2” 53.05 32494 32508
1/4” 5/8” 3/8” 3-1/2” 53.05 32495 32509
9/32” 11/16” 3/8” 3-1/2” 56.30 32496 32510
5/16” 3/4” 3/8” 3-1/2” 56.30 32497 32511
1/8” 3/8” 3/8” 3-1/2” 55.90 32498 32512
5/32” 7/16” 3/8” 3-1/2” 55.90 32499 32513
3/16” 1/2” 3/8” 3-1/2” 55.90 32500 32514
7/32” 9/16” 3/8” 3-1/2” 61.00 32501 32515
1/4” 5/8” 3/8” 3-1/2” 61.00 32502 32516
9/32” 11/16” 3/8” 3-1/2” 66.60 32503 32517
5/16” 3/4” 3/8” 3-1/2” 66.60 32504 32518
CuttingLength
O/ALength
CuttingDiameter
Shank Diameter
3221B
Price
3225B
EDP No.
SERIES 3221B
Ball End
SERIES 3225B
19
Price EDP No.
50.80
50.80
50.80
53.05
53.05
56.30
56.30
Price EDP No.
55.90
55.90
55.90
61.00
61.00
66.60
66.60
Weldon flats are standard on all tools.
Note: TiN - TiCN - TiAlN Coating Available See Page 23
Four Flutes Two Flutes
Four Flutes • Ball End Two Flutes • Ball End
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002Shank Diameters: +.0000 - .0005
SERIES 3230
CuttingLength
O/ALength
CuttingDiameter
Shank Diameter Price
Square End
SERIES 3242
1/16” 3/16” 1/8” 1-1/2” 13.40 12110
3/32” 3/8” 1/8” 1-1/2” 13.40 12111
1/8” 1/2” 1/8” 1-1/2” 11.75 12112
3/16” 5/8” 3/16” 2” 16.25 12114
1/4” 3/4” 1/4” 2-1/2” 20.50 12116
5/16” 13/16” 5/16” 2-1/2” 25.25 12118
3/8” 1” 3/8” 2-1/2” 30.00 12120
7/16” 1” 7/16” 2-3/4” 37.00 12121
1/2” 1” 1/2” 3” 46.80 12122
SERIES 3230B
Ball End
SERIES 3242B
3230 3242
CuttingLength
O/ALength
CuttingDiameter
Shank Diameter Price
3230B 3242B
1/16” 3/16” 1/8” 1-1/2” 16.30 12123
3/32” 3/8” 1/8” 1-1/2” 16.30 12124
1/8” 1/2” 1/8” 1-1/2” 14.20 12125
3/16” 5/8” 3/16” 2” 19.50 12127
1/4” 3/4” 1/4” 2-1/2” 24.60 12129
5/16” 13/16” 5/16” 2-1/2” 31.45 12131
3/8” 1” 3/8” 2-1/2” 36.00 12133
7/16” 1” 7/16” 2-3/4” 45.00 12134
1/2” 1” 1/2” 3” 62.15 12135
20
Specifically suited for the cutting of cast iron, brass & bronze and hardened steels.
13.40
13.40
11.75
16.25
20.50
25.25
30.00
37.50
46.80
12136
12137
12138
12140
12142
12144
12146
12147
12148
EDP No.
Price EDP No.
16.30
16.30
14.20
19.50
24.60
31.45
36.00
45.00
62.15
12149
12150
12151
12153
12155
12157
12159
12160
12161
EDP No.
Price EDP No.
Four Flutes Two Flutes
Four Flutes • Ball End Two Flutes • Ball End
Note: TiN - TiCN - TiAlN Coating Available See Page 23
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Shank Diameters: +.0000 - .0005
Center Line Angle
Appr. FluteLength
SERIES 3211
ShankDiameter
NoseDiameter
3211 TiAlN
EDP NO.Price
1/4” 1° 30’ 1/8” 1-1/2” 3” 31.50 32610 37.25 38750
1/4” 3° 1/8” 1” 3” 31.50 32611 37.25 38751
1/4” 5° 1/8” 3/4” 3” 29.90 32612 35.65 38752
1/4” 7° 1/8” 1/2” 3” 28.35 32613 34.10 38753
3/8” 1° 30’ 3/16” 1-3/4” 3-1/2” 52.75 32614 63.75 38754
3/8” 3° 5/32” 1-3/4” 3-1/2” 52.75 32615 63.75 38755
3/8” 5° 1/8” 1-1/2” 3-1/2” 47.35 32616 58.35 38756
3/8” 7° 5/32” 3/4” 3-1/2” 46.50 32617 57.50 38757
1/2” 3° 1/4” 2” 4” 72.50 32618 86.25 38758
1/2” 5° 1/4” 1-1/4” 4” 69.80 32619 83.55 38759
1/2” 7° 3/16” 1-1/4” 4” 69.80 32620 83.55 38760
1/4” 1° 30’ .0625 1-1/2” 3” 37.80 32630 43.55 38761
1/4” 3° .0625 1” 3” 37.80 32631 43.55 38762
1/4” 5° .0625 3/4” 3” 35.90 32632 41.65 38763
1/4” 7° .0625 1/2” 3” 34.05 32633 39.80 38764
3/8” 1° 30’ .0938 1-3/4” 3-1/2” 63.30 32634 74.30 38765
3/8” 3° .0781 1-3/4” 3-1/2” 63.30 32635 74.30 38766
3/8” 5° .0625 1-1/2” 3-1/2” 56.80 32636 67.80 38767
3/8” 7° .0781 3/4” 3-1/2” 55.80 32637 66.80 38768
1/2” 3° .1250 2” 4” 79.75 32638 93.50 38769
1/2” 5° .1250 1-1/4” 4” 76.80 32639 90.55 38770
1/2” 7° .0938 1-1/4” 4” 76.80 32640 90.55 38771
1/8” .0312 5/16” 1-1/2” 23.15 32600 25.35 38772
5/32” .0390 5/16” 2” 26.10 32601 28.95 38773
3/16” .0469 3/8” 2” 27.40 32602 30.25 38774
1/4” .0625 1/2” 2-1/2” 32.05 32603 40.70 38775
5/16” .0781 5/8” 2-1/2” 41.50 32604 50.15 38776
3/8” .0938 3/4” 2-1/2” 47.25 32605 55.90 38777
7/16” .1094 7/8” 2-3/4” 67.40 32606 78.05 38778
1/2” .1250 1” 3 73.70 32607 84.35 38779
A—Overall lengthB—Approximate flute lengthC—Nose diameterD—C/L angleE—Shank diameterF—Square or Nose Radius *— Style of Flute
Special cutters are available for quote. Use this diagram for your specific requirements.
O/ALength
3211
EDP NO.Price SQUARE END
Center Line Angle
Appr. FluteLength
ShankDiameter
NoseRadius
3211B TiAlN
EDP NO.Price O/A
Length
3211B
EDP NO.Price
SERIES 3211B NON COATED
SERIES 3211B TiAlN TiAlN COATED
BALL END
SERIES 3211B
Appr. FluteLength
ShankDiameter
NoseRadius
3261B TiAlN
Price O/A
Length
3261B
EDP NO.Price BALL END
SERIES 3261B
SPECIAL TAPERED END MILLS
EDP NO.
21
SERIES 3211 NON COATED
SERIES 3211 TiAlN TiAlN COATED
SERIES 3261B NON COATED
SERIES 3261B TiAlN TiAlN COATED
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .003Shank Diameters: +.0000 - .0005
CuttingLength
O/ALength
SERIES 3900
CuttingDiameter
ShankDiameter Price
Two straight flutes.General purpose in wood composites and thin laminates, also for hard, more rigid plastics.
Two LH spiral RH cutting flutes.For hard and abrasive materials.LH spiral holds material down and forces chips downward.
Three LH spiral RH cutting flutes.For fiberglass and composite materials.LH spiral holds material down and forces chips down.
One single flute.Designed for composites, wood and softer ductile plastics.
Two RH spiral RH cutting flutes.Designed for wood, wood composites, plastic and other non-ferrous materials. The upcut prevents burning in plunge cuts.
Two LH spiral RH cutting flutes.Designed for wood, wood composites, plastics and non-fer-rous materials.LH flutes pushes chips downward.
1/8” 1/2” 1/8” 1-1/2” 12.95 39100 39107 39114 39121 39128 39135
3/16” 5/8” 3/16” 2” 17.65 39101 39108 39115 39122 39129 39136
1/4” 3/4” 1/4” 2-1/2” 20.40 39102 39109 39116 39123 39130 39137
1/4” 1” 1/4” 2-1/2” 21.70 39103 39110 39117 39124 39131 39138
3/8” 1” 3/8” 2-1/2” 33.05 39105 39112 39119 39126 39133 39140
1/2” 1” 1/2” 3” 55.45 39106 39113 39120 39127 39134 39141
SERIES 3910
SERIES 3925
SERIES 3930
SERIES 3915
SERIES 3935
22
W
O
O
D
R
O
U
T
E
R
S
3900 3910 3925 3930 3915 3935
EDP NumbersWood Router
EDP Numbers
STA
ND
AR
D
EN
D M
ILLS
Titanium Nitride (TiN) Titanium Carbonitride (TiCN) Titanium Aluminum Nitride (TiAlN)
The use of Titanium coatings allow for the use of higher speeds and feeds, with greatly increased tool life. Tolerances can be held for longer periods with improved workpiece finishes. The coatings bond a thermal insulation barrier to the tool to reject heat from the tool surface back into the chip. It improves the mechanical strength of the cutting edge with higher hardness and a lower friction coefficient that allows the chip to flow off of the cutting surface. The coating also provides a chemical resistance to the force of heat, pressure, coolant and the work piece material present at the cutting edge. It protects the tools substrate from these forces, stabilizing the cutting edge.
Micro Hardness 80/RC 90/RC 90/RC
Max Temp 600°c/1100°f 400°c/750°f 800°c/1470°f
Coating Color GOLD BLUE/GREY VIOLET/GREY
Primary Application A good general purpose coating that is excellent for iron based
materials, and low and medium strength steels. It has excellent
wear resistance, thermal stability, and a low coeeficient of
friction that improves thermal transfer of heat away from the
cutting edge.
This coating has a higher hardness and is recommended
for cast irons, high silicon aluminum alloys, copper and
other abrasive materials. Coolant must be applied to control temperature at the
cutting edge.
Excellent for high strength steels, hard die steels and high
temperature alloys and tita-nium alloys. It is designed for
dry machining, which eliminates thermal shocks created by flood coolants.
Add the additional cost shown below to the list price.
Sizes TiN TiCN TiAlN
Single End
1/8" x 1-1/2" 1.40 2.20 2.20
3/16" x 2" 1.85 2.85 2.85
1/4" x 2-1/2" 3.70 5.75 5.75
3/8" x 2-1/2" 5.50 8.65 8.65
7/16 x 2-3/4" 6.85 10.65 10.65
1/2" x 3" 6.85 10.65 10.65
5/8" x 3-1/2" 9.90 15.40 15.40
3/4" x 4" 11.75 18.20 18.20
1" x 4" 17.25 26.80 26.80
1/8" x 3" 1.85 2.85 2.85
3/16" x 3" 2.80 4.35 4.35
1/4" x 4" 4.35 6.80 6.80
1/4" x 6" 6.15 9.55 9.55
3/8" x 4" 7.10 11.00 11.00
3/8" x 6" 9.65 15.05 15.05
1/2" x 4" 8.90 13.75 13.75
1/2" x 6" 12.45 19.35 19.35
5/8" x 5" 12.40 19.25 19.25
5/8" x 6" 14.70 22.85 22.85
3/4" x 5" 14.35 22.35 22.35
3/4" x 6" 17.00 26.45 26.45
3/4" x 7" 19.50 30.25 30.25
1" x 5" 19.80 30.80 30.80
1" x 6" 22.10 34.40 34.40
1" x 7" 24.60 38.25 38.25
1/8" x 1-1/2" 2.05 3.30 3.30
3/16" x 2" 2.75 4.25 4.25
1/4" x 2-1/2" 5.60 8.65 8.65
3/8" x 2-1/2" 8.30 12.95 12.95
7/16" x 2-3/4" 10.25 15.95 15.95
1/2" x 3" 10.25 15.95 15.95
Sizes TiN TiCN TiAlN
1/8" x 2" 2.05 3.30 3.30
3/16" x 3" 4.25 6.50 6.50
1/4" x 3" 5.60 8.65 8.65
5/16" x 3" 8.30 12.95 12.95
3/8" x 3" 10.65 16.50 16.50
7/16" x 4" 13.35 20.65 20.65
1/2" x 4" 13.35 20.65 20.65
All Sizes 10.65 16.45 16.45
Coated Prices are based on shank diameter and O/A length.
For Metric sizes use next larger fractional dimension and O/A length.
Specifications TiN TiCN TiAlN
Sizes TiN TiCN TiAlN
Sizes TiN TiCN TiAlN
SERIES 3260 - 3265 - 3260B - 3265B
SERIES 3278 - 3282 - 3278B - 3282B
SERIES 3221 - 3225 - 3221B - 3225B
23
Double End
Standard
Extra
Long
STA
ND
AR
D
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .0000 - .0005Shank Diameters: +.0000 - .0005
CuttingLength
O/ALength
TWO FLUTES
CuttingDiameter
ShankDiameter
3815
EDP NO.Price
24
1/8” 1/2” 1/8” 1-1/2” 11.25 38040 005 - 010 x 45°
3/16” 5/8” 3/16” 2” 16.30 38042 005 - 010 x 45°
1/4” 1” 1/4” 2-1/2” 21.35 38030 005 - 010 x 45°
5/16” 1” 5/16” 2-1/2” - - -
3/8” 1” 3/8” 2-1/2” 30.50 38033 010 - 015 x 45°
7/16” 1” 7/16” 2-3/4” - - -
1/2” 1-1/4” 1/2” 3” 48.65 38035 010 - 015 x 45°
5/8” 1-5/8” 5/8” 3-1/2” 82.20 38037 015 - 020 x 45°
3/4” 1-3/4” 3/4” 4” 102.25 38038 015 - 020 x 45°
1” 1-3/4” 1” 4” 177.50 38039 020 - 025 x 45°
11.25 38214
16.30 38216
21.35 38218
- -
30.50 38220
- -
48.65 38200
82.20 38222
102.25 38212
177.50 38224
Chamfer
3825
EDP NO.Price
THREE FLUTES
STANDARD LENGTH
11.25 38346
16.30 38348
21.35 38350
27.90 38352
30.50 38354
42.50 38356
48.65 38358
82.20 38360
102.25 38362
177.50 38364
3835
EDP NO.Price
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
3895
EDP NO.Price
1/8” 1/4” 1/8” 1-1/2” - - -
3/16” 5/16” 3/16” 2” - - -
1/4” 1/2” 1/4” 2” 15.70 38041 005 - 010 x 45°
5/16” 1/2” 5/16” 2-1/2” - - -
3/8” 5/8” 3/8” 2-1/2” 27.50 38043 010 - 015 x 45°
7/16” 5/8” 7/16” 2-3/4” - - -
1/2” 3/4” 1/2” 3” 43.00 38045 010 - 015 x 45°
5/8” 1” 5/8” 3-1/2” 74.65 38046 015 - 020 x 45°
3/4” 1” 3/4” 4” 93.20 38047 015 - 020 x 45°
1” 1-1/4” 1” 4” - - -
- -
- -
15.70 38226
- -
27.50 38228
- -
43.00 38230
74.65 38232
93.20 38234
- -
Chamfer
3855
EDP NO.Price
STUB LENGTH
10.75 38366
15.60 38368
15.70 38370
25.10 38372
27.50 38374
38.60 38376
43.00 38378
74.65 38380
93.20 38382
167.50 38384
3875
EDP NO.Price
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
3815XL
EDP NO.Price
1/4” 2” 1/4” 4” 42.45 38031 005 - 010 x 45°
5/16” 1-1/8” 5/16” 3” 43.50 38032 010 - 015 x 45°
5/16” 1-1/4” 5/16” 4” - - -
3/8” 2” 3/8” 4” 47.80 38034 010 - 015 x 45°
7/16” 2” 7/16” 4” - - -
1/2” 2” 1/2” 4” 59.50 38036 010 - 015 x 45°
1/2” 3-1/4” 1/2” 6” - - -
5/8” 2-1/2” 5/8” 5” - - -
5/8” 3-1/4” 5/8” 6” - - -
3/4” 2-1/2” 3/4” 5” 157.10 38048 015 - 020 x 45°
3/4” 3-1/4” 3/4” 6” - - -
1” 2-1/2” 1” 5” - - -
1” 3-1/4” 1” 6” - - -
42.45 38236
43.50 38238
- -
47.80 38240
- -
59.50 38242
- -
- -
- -
157.10 38244
- -
- -
- -
Chamfer
3825XL
EDP NO.Price
EXTRA LONG LENGTH
42.45 38386
- -
45.00 38388
47.80 38390
59.90 38392
59.50 38394
93.50 38395
117.75 38396
137.75 38397
157.10 38398
194.70 38399
250.50 38400
292.50 38402
3835XL
EDP NO.Price
Note: TiN • TiCN • TiAIN - Available See Pg. 23.
TWO FLUTE
WITH CHAMFER SQUARE END
THREE FLUTE
SQUARE END
Series 3815
Series 3895
Series 3815XL
Series 3825
Series 3855
Series 3825XL
Series 3835
Series 3875
Series 3835XL
HI-
PER
FO
RM
AN
CE
EN
D M
ILLS
TOLERANCES: Radius +/- .0005Shank Diameters: +.0000 - .0005
HI-P
ER
FO
RM
AN
CE
EN
D M
ILLS
CuttingLength
O/ALength
SERIES 3800
CuttingDiameter
ShankDiameter
3800
EDP NO.
3800 TiN
EDP NO.Price Price
Series 3800 NON COATED
Series 3800 TiN TiN COATED
Series 3800 TiCN TiCN COATED
Series 3800 TiAlN TiAlN COATED
Designed for milling alloy steels. Tool will produce better finishes with reduced horsepower requirements.
1/8” 1/2” 1/8” 1-1/2” 9.50 38001 10.90 38020 11.70 38201 11.70 38500
3/16” 5/8” 3/16” 2” 13.65 38002 15.50 38021 16.50 38202 16.50 38501
1/4” 3/4” 1/4” 2-1/2” 16.25 38003 19.95 38022 22.00 38203 22.00 38502
5/16” 13/16” 5/16” 2-1/2” 26.65 38004 32.15 38023 35.30 38204 35.30 38503
3/8” 1” 3/8” 2-1/2” 30.20 38005 35.70 38024 38.85 38205 38.85 38504
1/2” 1” 1/2” 3” 43.50 38006 50.35 38025 54.15 38206 54.15 38506
5/8” 1-1/2” 5/8” 3-1/2” 76.50 38007 86.40 38026 91.90 38207 91.90 38507
3/4” 1-1/2” 3/4” 4” 108.50 38008 120.25 38027 126.70 38208 126.70 38508
1” 1-1/2” 1” 4” 179.50 38009 196.75 38028 206.30 38209 206.30 38509
1/4” 1/8” 1/4” 2-1/2” 1/16” 38.60 23250
3/8” 3/16” 3/8” 2-1/2” 3/32” 60.40 23375
1/2” 1/4” 1/2” 3” 1/8” 79.10 23500
*3/4” 3/8” 3/8” 2-3/4” 3/16” 98.95 23750
*1” 1/2” 1/2” 3” 1/4” 115.85 23752
Special Form Relieved Radius Mills Available.Specify Pilot Diameter, Radius, and Large Diameter.
Pilot diameter is non-cutting
* Solid Head - Steel Shank
3800 TiCN
EDP NO.Price
3800 TiAlN
EDP NO.Price
PilotDiameter
O/ALength
CuttingDiameter
ShankDiameter Radius
2351
EDP NO.Price
SERIES 2351 • Four Flutes
25
TOLERANCES: Cutter Diameters: + .000 - .002Shank Diameters: +.0000 - .0005
HI-
PER
FO
RM
AN
CE
EN
D M
ILLS
26
1/4" 1/2" 1/4" 2 1/2" 1" .240 .030 33.50 36100
3/8" 3/4" 3/8" 3" 1 1/4" .360 .030 41.25 36104
1/2" 3/4" 1/2" 3" 1 1/4" .480 .030 52.50 36108
3/8" 3/4" 3/8" 4" 2 1/4" .360 .030 50.50 36112
1/2" 3/4" 1/2" 4" 2 1/8" .480 .030 70.75 36116
5/8" 3/4" 5/8" 4" 2" .600 .030 102.80 36120
3/4" 3/4" 3/4" 4" 1 7/8" .720 .030 125.50 36124
1/2" 3/4" 1/2" 6" 3 1/2" .480 .030 95.25 36128
5/8" 3/4" 5/8" 6" 3 1/2" .600 .030 140.50 36132
3/4" 3/4" 3/4" 6" 3 1/2" .720 .030 176.90 36136
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
*TDNeck
DiameterCornerRadius
3615R
EDP NO.Price
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
*TDNeck
DiameterCornerRadius
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
*TDNeck
DiameterCornerRadius
3615LR
EDP NO.Price
3615XLR
EDP NO.Price
SERIES 3615R • STANDARD LENGTH
SERIES 3615LR • LONG LENGTH
SERIES 3615XLR • EXTRA LONG LENGTH
Shank Neck
*TD
Cutting Length
Cutting Diameter
*Total Depth = Flute Length + Neck Length
cutting diameter tolerance +0-002 shank diameter tolerance +0-0004 *TD=total depth of cut
SERIES 3615R AlTiN COATED
The “Maximus” end mill is designed for very high speed dry machining of hardened die and tool steels. Its special AITiN coating provides for excellent heat and wear resistance. It has a .030 corner radius for increased strength. With its short flute length and extended neck diameter it can be used to mill deep pockets and cavities with minimum deflection.
Ball Nose Available At Additional Cost.
TOLERANCES: Cutter Diameters: + .000 - .002Shank Diameters: +.0000 - .0005
CuttingLength
O/ALength
SERIES 3975
CuttingDiameter
ShankDiameter
3975
EDP NO.Price
Series 3975 NON COATED
Series 3975 TiN TiN COATED
Series 3975 TiCN TiCN COATED
Series 3975 TiAlN TiAlN COATED
1/4” 3/4” 1/4” 2-1/2” 3 53.45 39711 57.55 39703 59.80 39725 59.80 39600
5/16” 13/16” 5/16” 2-1/2” 3 57.10 39713 63.15 39704 66.60 39727 66.65 39601
3/8” 1” 3/8” 2-1/2” 3 73.05 39715 79.10 39705 82.55 39729 82.55 39602
1/2” 1” 1/2” 3” 4 92.30 39717 99.80 39706 104.00 39731 104.00 39604
5/8” 1-1/2” 5/8” 3-1/2” 4 159.40 39719 170.30 39707 176.35 39733 176.35 39605
3/4” 1-1/2” 3/4” 4” 4 181.50 39721 194.45 39708 201.50 39735 201.50 39606
1” 1-1/2” 1” 4” 5 293.15 39723 312.10 39709 322.65 39737 322.65 39607
1/4” 3/4” 1/4” 2-1/2” 3 53.45 39950 57.55 39970 59.80 39931 59.80 39608
5/16” 13/16” 5/16” 2-1/2” 3 57.10 39952 63.15 39972 66.60 39933 66.65 39609
3/8” 1” 3/8” 2-1/2” 3 73.05 39954 79.10 39974 82.55 39935 82.55 39610
1/2” 1” 1/2” 3” 4 92.30 39956 99.80 39976 104.00 39937 104.00 39611
5/8” 1-1/2” 5/8” 3-1/2” 4 159.40 39958 170.30 39978 176.35 39939 176.35 39612
3/4” 1-1/2” 3/4” 4” 4 181.50 39960 194.45 39980 201.50 39941 201.50 39613
1” 1-1/2” 1” 4” 5 293.90 39962 312.10 39982 322.65 39943 322.65 39614
1/4” 3/4” 1/4” 2-1/2” 53.54 39908 57.55 39901
5/16” 13/16” 5/16” 2-1/2” 57.10 39910 63.15 39902
3/8” 1” 3/8” 2-1/2” 73.05 39912 79.10 39903
1/2” 1” 1/2” 3” 92.30 39913 99.80 39904
5/8” 1-1/2” 5/8” 3-1/2” 159.40 39914 170.30 39905
3/4” 1-1/2” 3/4” 4” 181.50 39916 194.45 39906
1” 1-1/2” 1” 4” 293.95 39918 312.10 39907
30° RH Spiral (Number of flutes shown below)
Designed to cut mild steels, steel alloys,stainless steel and hardened steel.
30° RH Spiral (Number of flutes shown below)
For maximum stock removal in titanium, inconel, waspaloy and other space age materials.
3 Flute - 40° RH Spiral
Designed for machining aluminum and other light alloys such as brass and bronze.
NOTE: Weldon flats on shank sizes of 3/8” and larger. Separate data sheet for correct tool operation is supplied with all hoggers.
3975 TiN
EDP NO.Price
3975 TiCN
EDP NO.Price
3975 TiAlN
EDP NO.Price No. of Flutes
Series 3995 NON COATED
Series 3995 TiN TiN COATED
Series 3995 TiCN TiCN COATED
Series 3995 TiAlN TiAlN COATED
SERIES 3995 Fine Pitch
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
3995
EDP NO.Price
3995 TiN
EDP NO.Price
3995 TiCN
EDP NO.Price
3995 TiAlN
EDP NO.Price No. of Flutes
Series 3990 NON COATED
Series 3990 TiN TiN COATED
Series 3990 TiAIN TiAIN COATED
CuttingLength
O/ALength
CuttingDiameter
ShankDiameter
3990
EDP NO.Price
3990 TiN
EDP NO.Price
SERIES 3990
27
3990 TiAIN
EDP NO.Price
39615
39616
39617
39618
39619
39620
39621
59.80
66.65
82.55
104.00
176.35
201.50
322.65
HI-P
ER
FO
RM
AN
CE
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002Shank Diameters: +.0000 - .0005
Price
CuttingLength
O/ALength
3335
EDP NO. Price
3335 TiCN
EDP NO. Price
3335 TiAlN
EDP NO.
SERIES 3335
CuttingDiameter
ShankDiameter
28
Radius
1/8” 1/2” 1/8” 1-1/2” .008/.010 12.05 33350 14.25 33550 14.25 33450
3/16” 9/16” 3/16” 2” .008/.010 16.85 33354 19.70 33554 19.70 33454
1/4” 3/4” 1/4” 2-1/2” .015/.020 22.70 33358 28.45 33558 28.45 33458
5/16” 13/16” 5/16” 2-1/2” .015/.020 23.75 33362 32.40 33562 32.40 33462
3/8” 1” 3/8” 2-1/2” .015/.020 30.50 33366 41.15 33566 41.15 33466
7/16” 1” 7/16” 2-3/4” .015/.020 31.75 33368 42.40 33568 42.40 33468
1/2” 1 1/4” 1/2” 3” .030/.035 42.50 33370 53.15 33570 53.15 33470
5/8” 1 5/8” 5/8” 3-1/2” .030/.035 74.75 33372 90.15 33572 90.15 33472
3/4” 1 5/8” 3/4” 4” .030/.035 102.80 33374 121.00 33574 121.00 33474
1” 2” 1” 4” .030/.035 177.50 33376 204.30 33576 204.30 33476
STANDARD LENGTH
This end mill is specifically designed for slotting, pocketing and roughing in various alloy steels. The three flute design allows for increased chip loads and the corner radius provides strength and added tool life.
STUB LENGTH
SERIES 3395
Price
CuttingLength
O/ALength
3395
EDP NO. Price
3395 TiCN
EDP NO. Price
3395 TiAlN
EDP NO.
CuttingDiameter
ShankDiameter Radius
1/8” 1/4” 1/8” 1-1/2” .008/.010 11.25 33300 13.45 33500 13.45 33400
3/16” 5/16” 3/16” 2” .008/.010 15.50 33304 18.35 33504 18.35 33404
1/4” 3/8” 1/4” 2” .015/.020 20.10 33308 25.95 33508 25.95 33408
5/16” 7/16” 5/16” 2-1/2” .015/.020 21.50 33312 30.15 33512 30.15 33412
3/8” 1/2” 3/8” 2-1/2” .015/.020 29.05 33316 37.70 33516 37.70 33416
7/16” 9/16” 7/16” 2-3/4” .015/.020 30.15 33318 40.80 33518 40.80 33418
1/2” 5/8” 1/2” 3” .030/.035 41.00 33320 51.65 33520 51.65 33420
5/8” 3/4” 5/8” 3-1/2” .030/.035 70.75 33322 86.15 33522 86.15 33422
3/4” 1” 3/4” 4” .030/.035 91.10 33324 109.30 33524 109.30 33424
1” 1 1/4” 1” 4” .030/.035 154.50 33326 181.30 33526 181.30 33426
Series 3335 NON COATED
Series 3335 TiCN TiCN COATED
Series 3335 TiAlN TiAlN COATED
Coated Tools
Coated Tools
HI-
PER
FO
RM
AN
CE
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002Shank Diameters: +.0000 - .0005
This end mill is specifically designed for superior performance in stainless steel, titanium, nickel alloys and some tool steels. Its 45° spiral allows faster feed rates while providing excellent finishes.
1/8” 1/2” 1/8” 1-1/2” 12.50 38050 14.70 38100 14.70 38150
5/32” 9/16” 3/16” 2” 17.25 38052 20.10 38102 20.10 38152
3/16” 9/16” 3/16” 2” 17.25 38054 20.10 38104 20.10 38154
7/32” 3/4” 1/4” 2-1/2” 20.25 38056 24.60 38106 24.60 38156
1/4” 3/4” 1/4” 2-1/2” 19.00 38058 23.35 38108 23.35 38158
5/16” 13/16” 5/16” 2-1/2” 29.50 38062 38.15 38110 38.15 38160
3/8” 1” 3/8” 2-1/2” 32.00 38064 40.65 38112 40.65 38162
7/16” 1” 7/16” 2-3/4” 40.70 38068 51.35 38114 51.35 38164
1/2” 1-1/4” 1/2” 3” 43.75 38070 54.40 38116 54.40 38166
5/8” 1-5/8” 5/8” 3-1/2” 84.25 38074 99.65 38118 99.65 38168
3/4” 1-5/8” 3/4” 4” 119.50 38076 137.70 38120 137.70 38170
1” 2” 1” 4” 185.25 38078 212.05 38122 212.05 38172
1/4” 1/2” 1/4” 2” 16.75 38057 22.50 38124 22.50 38174
3/8” 1/2” 3/8” 2-1/2” 30.10 38063 38.75 38126 38.75 38176
1/2” 5/8” 1/2” 3” 40.55 38069 51.20 38128 51.20 38178
1/4” 1-1/4” 1/4” 4” 38.25 38060 45.05 38130 45.05 38180
3/8” 2” 3/8” 4” 45.50 38066 56.50 38132 56.50 38182
1/2” 2” 1/2” 4” 59.90 38072 73.65 38134 73.65 38184
5/8” 2-1/2” 5/8” 5” 109.25 38073 128.50 38135 128.00 38185
3/4” 2-1/2” 3/4” 5” 154.30 38061 176.65 38131 176.65 38181
1 2-1/2” 1” 5” 281.35 38071 303.75 38133 303.75 38187
PriceCuttingLength
O/ALength
3845
EDP NO. Price
3845 TiCN
EDP NO. Price
3845 TiAlN
EDP NO.Cutting
DiameterShank
Diameter
SERIES 3845
STANDARD LENGTH
STUB LENGTH
PriceCuttingLength
O/ALength
3865
EDP NO. Price
3865 TiCN
EDP NO. Price
3865 TiAlN
EDP NO.Cutting
DiameterShank
Diameter
SERIES 3865
EXTRA LONG LENGTH
SERIES 3845XL
PriceCuttingLength
O/ALength
3845XL
EDP NO. Price
3845XL TiCN
EDP NO. Price
3845XL TiAlN
EDP NO.Cutting
DiameterShank
Diameter
Series 3845 NON COATED
Series 3845 TiCN TiCN COATED
Series 3845 TiAlN TiAlN COATED
29
Coated Tools
Coated Tools
Coated Tools
HI-P
ER
FO
RM
AN
CE
EN
D M
ILLS
TOLERANCES: Cutter Diameters: + .000 - .002
NEW
LOWER
PRICES
CuttingLength
O/ALength
SERIES 2004 • Four Flutes
Size Range
ShankDiameter
2004
EDP NO.
Price1 PC
AVAILABLE • SQUARE END - CORNER RADIUS - FULL RADIUS
The Fullerton Tool Series “2000” is not an altered standard tool, but a fully CNC ground end mill with exacting new tool geometry for optimal tool performance and longevity. Altering a standard end mill reduces flute depth and changes the radial rake, adversely effecting cutting performance. We will furnish up to 12 pieces per size, in 48 hours with a square end, corner radius or full radius Dura-Carb end mill.
TO ORDER: SPECIFY SERIES, DIAMETER, AND TOLERANCE REQUIRED.
.1200-.1406 9/16” 3/16” 2” 20426 20226 72.40 64.50 51.50 40.25 32.75 28.45
.1407-.1562 9/16” 3/16” 2” 20428 20228 72.40 64.50 51.50 40.25 32.75 28.45
.1563-.1719 9/16” 3/16” 2” 20430 20230 72.40 64.50 51.50 40.25 32.75 28.45
.1720-.1875 5/8” 3/16” 2” 20432 20232 72.40 64.50 51.50 40.25 32.75 28.45
.1876-.2031 5/8” 1/4” 2-1/2” 20434 20234 75.00 67.65 54.25 43.00 35.50 31.00
.2032-.2188 5/8” 1/4” 2-1/2” 20436 20236 75.00 67.65 54.25 43.00 35.50 31.00
.2189-.2344 3/4” 1/4” 2-1/2” 20438 20238 75.00 67.65 54.25 43.00 35.50 31.00
.2345-.2500 3/4” 1/4” 2-1/2” 20440 20240 75.00 67.65 54.25 43.00 35.50 31.00
.2501-.2656 7/8” 5/16” 2-1/2” 20442 20242 80.35 76.75 57.10 51.65 44.15 35.75
.2657-.2812 7/8” 5/16” 2-1/2” 20444 20244 80.35 76.75 57.10 51.65 44.15 35.75
.2813-.2969 7/8” 5/16” 2-1/2” 20446 20246 80.35 76.75 57.10 51.65 44.15 35.75
.2970-.3125 7/8” 5/16” 2-1/2” 20448 20248 80.35 76.75 57.10 51.65 44.15 35.75
.3126-.3281 7/8” 3/8” 2-1/2” 20450 20250 84.30 76.75 62.80 51.65 44.15 39.70
.3282-.3438 7/8” 3/8” 2-1/2” 20452 20252 84.30 76.75 62.80 51.65 44.15 39.70
.3439-.3594 1” 3/8” 2-1/2” 20454 20254 84.30 76.75 62.80 51.65 44.15 39.70
.3595-.3750 1” 3/8” 2-1/2” 20456 20256 84.30 76.75 62.80 51.65 44.15 39.70
.3751-.3906 1” 7/16” 2-3/4” 20458 20258 91.90 84.40 70.05 58.90 51.40 46.95
.3907-.4062 1” 7/16” 2-3/4” 20460 20260 91.90 84.40 70.05 58.90 51.40 46.95
.4063-.4219 1” 7/16” 2-3/4” 20462 20262 91.90 84.40 70.05 58.90 51.40 46.95
.4220-.4375 1” 7/16” 2-3/4” 20464 20264 91.90 84.40 70.05 58.90 51.40 46.95
.4376-.4531 1” 1/2” 3” 20466 20266 96.40 85.40 75.25 63.10 56.25 51.25
.4532-.4688 1” 1/2” 3” 20468 20268 96.40 85.40 75.25 63.10 56.25 51.25
.4689-.4844 1” 1/2” 3” 20470 20270 96.40 85.40 75.25 63.10 56.25 51.25
.4845-.5000 1” 1/2” 3” 20472 20272 96.40 85.40 75.25 63.10 56.25 51.25
.5001-.5625 1-1/4” 9/16” 3-1/2” 20474 20274 121.50 113.75 98.00 86.85 79.25 74.95
.5626-.6250 1-1/2” 5/8” 3-1/2” 20476 20276 123.50 115.90 99.90 88.75 81.25 76.85
.6251-.6875 1-1/2” 3/4” 4” 20478 20278 155.25 148.00 131.10 119.50 112.35 107.25
.6876-.7500 1-1/2” 3/4” 4” 20480 20280 155.25 148.00 131.10 119.50 112.35 107.25
.7501-.8125 1-1/2” 7/8” 4” 20482 20282 261.00 249.80 220.50 201.80 188.20 181.75
.8126-.8750 1-1/2” 7/8” 4” 20484 20284 261.00 249.80 220.50 201.80 188.20 181.75
.8751-.9375 1-1/2” 1” 4” 20486 20286 268.15 349.50 224.05 205.90 193.40 186.05
.9376-1.000 1-1/2” 1” 4” 20488 20288 268.15 349.50 224.05 205.90 193.40 186.05
Corner Radius: Add 15% to prices shown and add a C after series number.
Full Radius: Add 20% to prices shown and add a B after series number.
2002
EDP NO.
Price2 PCS
Price3-5 PCS
Price6-7 PCS
Price8-11 PCS
Price12 PCS
SERIES 2002 • Two Flutes
30
SPECIAL
SERVICES
TOLERANCES: Cutter Diameters: + .000 - .002Shank Diameters: +.0000 - .0005
Diameter 2-5
All end mills in this catalog can be supplied with a corner radius and shipped within 72 hours. Specify the specific end mill and the radius required.
To estimate cost add these prices to the list price.Price per end
WELDON FLAT
To estimate cost add these prices to the list price.
3/16”-1/4” 3.00 2.25
5/16”-3/8”-7/16”-1/2” 3.00 2.75
9/16”-5/8”-3/4” 5.00 4.50
7/8”-1”-1-1/4” 5.00 4.50
7/8”-1”-1-1/4” 8.00 6.50
With the use of the newer collet holders most of our end mills no longer feature a weldon flat, except where shown. Special note: We cannot guarantee or accept the return of any end mill with a flat put on by the customer.
3/32” 11.70 6.70 5.20 3.70 3.10
1/8” 11.70 6.70 5.20 3.70 3.10
3/16” 12.60 7.60 6.10 4.60 4.00
1/4” 12.60 7.60 6.10 4.60 4.00
5/16” 13.10 8.10 6.60 5.10 4.50
5/8” 14.10 9.10 7.60 6.10 5.50
7/16” 16.10 11.10 9.60 8.10 7.50
1/2” 17.10 12.10 10.60 9.10 8.50
9/16” 20.10 15.10 13.60 11.10 10.50
5/8” 21.10 16.10 14.60 12.10 11.50
3/4” 21.10 16.10 14.60 13.10 12.00
7/8” 23.10 17.10 15.60 14.10 13.50
1” 23.10 17.10 15.60 14.10 13.50
6-11 12-24 25-49 50+ 50+
Shank
Size 1-11 12+
31
Single FlatDouble Weldon Flat
SPECIAL
SERVICES
NEW
LOWER
PRICES
NEW
LOWER
PRICES
MaterialSpeed
SFMFeed (F.P.T.)
1/8 1/4 1/2 3/4 1"
1000-2000700-1200300-450250-350500-900200-600200-400200-400
1000 min300-400150-300200-300250-400350-500200-350350-600200-400175-25075-150
150-30050-150
.001
.001
.001
.001
.001
.001
.001
.001
.001
.0005
.0005
.0005
.0005
.0005
.0005
.0005
.0005
.0005
.0005
.0005
.0005
.002
.002
.002
.002
.002
.002
.006
.002
.002
.001
.0005
.001
.0015
.002
.002
.001
.001
.001
.0005
.001
.0005
.004
.004
.003
.003
.003
.003
.010
.003
.004
.002
.001
.002
.002
.004
.004
.002
.002
.002
.001
.002
.001
.006
.006
.004
.004
.005
.004
.015
.004
.006
.004
.003
.003
.004
.006
.006
.004
.004
.004
.003
.004
.002
.008
.008
.005
.005
.007
.005
.020
.005
.008
.006
.005
.004
.006
.008
.008
.006
.006
.006
.004
.006
.004
Aluminum / Aluminum AlloyAluminum Alloy +10%BrassBronzeCopper / Copper AlloysComposites: Fiberglass
GraphitesGraphite / Epoxy
MagnesiumFree MachineWork HardeningNickel BaseDuctileGrayMalleableLow AlloyMedium AlloyHigh Alloy Mold-DieHigh StrengthSoftHard
Non Ferrous
Stainless Steel
Cast Iron
Steels
Titanium
High Temp Alloys
Non Ferrous
Stainless Steel
Cast Iron
Steels
Titanium
High Temp Alloys
All speed and feed recommendations should be considered only as a starting point.
Variations may be needed to achieve optimum results.
General Recommendations
Reduce SFM as material hardness increases. When milling steels up to 60 RC, chip color indicates correct speeds and feeds. -A tan color indicates correct speeds and feeds. -Blue or dark chips indicates speed should be reduced. -White chips indicates speed should be increased.
For lighter radial cut use higher range of recommended SFM. For greater radial cut use lower range of recommended SFM. Axial depth of cut should not exceed 1½ times the cutter diameter. Extra long end mills, FPT should be reduced by 50%. In slotting applications, SFM should be reduced by 20% of lowest range.
Axial Depth of Cut
Radial Width of Cut
32
30º RH Spiral
4 flute 2 flute 3 flute
Hoggers
3-5 flute 3-5 flute 3 flute
15º RHS3615R2 flute
35º RHS3335
3 flute 2 flute
45º RHS
5 flute
60º RHS3800
3 flute3825 3845 3975 3995 3990
4 flute
Straight Flute
2 flute3230 3242
= Best tool for the job
General Guidelines
Select the shortest flute length available for the application. The shorter flute length will provide greaterstability and increased feed rates.
Non-Ferrous Materials
The two flute end mill is excellent for plunging and slotting and will provide excellent chip removal. The two flute aluma mill can be operated at extremely high speeds for maximum chip removal. The three flute end mill provides for better finishes in slotting and profiling.
Ferrous Materials
The two flute “Maximus” is superb in the plunging and slotting of hardened die steel. The three flute alloy rougher and the 30° spiral hoggers are excellent for rough pocketing and profiling operations. Four and five flute end mills will give superior finishes with increased feed rates.
* A separate data sheet for correct tool operation is supplied with all “Hoggers.”
33
TOLERANCES: Drill Diameters: + .0000 - .0005
.0280 - 70 - 5/16” 1-1/4” 10.80 15012
.0292 - 69 - 5/16” 1-1/4” 10.80 15013
.0310 - 68 - 5/16” 1-1/4” 10.80 15014
.0312 1/32” - - 5/16” 1-1/4” 10.40 15015
.0320 - 67 - 5/16” 1-1/4” 10.40 15016
.0330 - 66 - 5/16” 1-1/4” 10.40 15017
.0350 - 65 - 5/8” 1-1/2” 10.10 15018
.0360 - 64 - 5/8” 1-1/2” 10.10 15019
.0370 - 63 - 5/8” 1-1/2” 9.80 15020
.0380 - 62 - 5/8” 1-1/2” 9.80 15021
.0390 - 61 - 5/8” 1-1/2” 9.80 15022
.0394 - - 1.0 5/8” 1-1/2” 9.80 15023
.0400 - 60 - 3/4” 1-1/2” 9.35 15024
.0410 - 59 - 3/4” 1-1/2” 9.35 15025
.0420 - 58 - 3/4” 1-1/2” 9.35 15026
.0430 - 57 - 3/4” 1-1/2” 9.35 15027
.0465 - 56 - 3/4” 1-1/2” 9.35 15028
.0469 3/64” - - 3/4” 1-1/2” 9.35 15029
.0520 - 55 - 3/4” 1-1/2” 9.00 15030
.0550 - 54 - 3/4” 1-1/2” 9.00 15031
.0591 - - 1.5 3/4” 1-1/2” 9.00 15032
.0595 - 53 - 3/4” 1-1/2” 9.00 15033
.0625 1/16” - - 3/4” 1-1/2” 9.00 15034
.0635 - 52 - 3/4” 1-1/2” 8.80 15035
.0670 - 51 - 3/4” 1-1/2” 8.80 15036
.0700 - 50 - 7/8” 1-3/4” 8.80 15037
.0730 - 49 - 7/8” 1-3/4” 8.80 15038
.0760 - 48 - 7/8” 1-3/4” 8.80 15039
.0781 5/64” - - 7/8” 1-3/4” 8.80 15040
.0785 - 47 - 7/8” 1-3/4” 7.75 15041
.0787 - - 2.0 7/8” 1-3/4” 7.75 15042
.0810 - 46 - 7/8” 1-3/4” 7.75 15043
.0820 - 45 - 7/8” 1-3/4” 7.75 15044
.0860 - 44 - 1” 2” 7.75 15045
.0890 - 43 - 1” 2” 7.75 15046
.0935 - 42 - 1” 2” 7.75 15047
.0938 3/32” - - 1” 2” 7.50 15048
.0960 - 41 - 1” 2” 9.35 15049
.0980 - 40 - 1” 2” 9.35 15050
.0984 - - 2.5 1” 2” 9.35 15051
.0995 - 39 - 1-1/4” 2-1/4” 9.35 15052
.1015 - 38 - 1-1/4” 2-1/4” 9.35 15053
.1040 - 37 - 1-1/4” 2-1/4” 9.35 15054
.1065 - 36 - 1-1/4” 2-1/4” 9.35 15055
.1094 7/64” - - 1-1/4” 2-1/4” 9.35 15056
.1100 - 35 - 1-1/4” 2-1/4” 9.90 15057
.1110 - 34 - 1-1/4” 2-1/4” 9.90 15058
.1130 - 33 - 1-1/4” 2-1/4” 9.90 15059
.1160 - 32 - 1-1/4” 2-1/4” 9.90 15060
.1181 - - 3.0 1-1/4” 2-1/4” 9.90 15061
.1200 - 31 - 1-1/4” 2-1/4” 9.90 15062
.1250 1/8” - - 1-1/4” 2-1/4” 9.70 15063
.1285 - 30 - 1-3/8” 2-1/2” 10.65 15064
.1360 - 29 - 1-3/8” 2-1/2” 10.65 15065
.1378 - - 3.5 1-3/8” 2-1/2” 10.65 15066
.1405 - 28 - 1-3/8” 2-1/2” 10.65 15067
.1406 9/64” - - 1-3/8” 2-1/2” 10.65 15068
.1440 - 27 - 1-3/8” 2-1/2” 12.20 15069
.1470 - 26 - 1-3/8” 2-1/2” 12.20 15070
.1495 - 25 - 1-3/8” 2-1/2” 12.20 15071
.1520 - 24 - 1-3/8” 2-1/2” 12.20 15072
.1540 - 23 - 1-3/8” 2-1/2” 12.20 15073
.1562 5/32” - - 1-3/8” 2-1/2” 11.70 15074
.1570 - 22 - 1-3/8” 2-1/2” 14.40 15075
.1575 - - 4.0 1-3/8” 2-1/2” 14.40 15076
.1590 - 21 - 1-3/8” 2-1/2” 14.40 15077
.1610 - 20 - 1-3/8” 2-1/2” 14.40 15078
.1660 - 19 - 1-5/8” 2-3/4” 14.40 15079
.1695 - 18 - 1-5/8” 2-3/4” 14.40 15080
.1719 11/64” - - 1-5/8” 2-3/4” 14.40 15081
.1730 - 17 - 1-5/8” 2-3/4” 14.75 15082
.1770 - 16 - 1-5/8” 2-3/4” 14.75 15083
.1772 - - 4.5 1-5/8” 2-3/4” 14.75 15084
.1800 - 15 - 1-5/8” 2-3/4” 14.75 15085
.1820 - 14 - 1-5/8” 2-3/4” 14.75 15086
.1850 - 13 - 1-5/8” 2-3/4” 14.75 15087
.1875 3/16” - - 1-5/8” 2-3/4” 14.20 15088
.1890 - 12 - 1-5/8” 2-3/4” 15.45 15089
.1910 - 11 - 1-5/8” 2-3/4” 15.45 15090
.1935 - 10 - 1-5/8” 2-3/4” 15.45 15091
.1960 - 9 - 1-3/4” 3” 15.45 15092
.1968 - - 5.0 1-3/4” 3” 15.45 15093
.1990 - 8 - 1-3/4” 3” 15.45 15094
.2010 - 7 - 1-3/4” 3” 15.45 15095
.2031 13/64” - - 1-3/4” 3” 15.45 15096
.2040 - 6 - 1-3/4” 3” 18.30 15097
.2055 - 5 - 1-3/4” 3” 18.30 15098
.2090 - 4 - 1-3/4” 3” 18.30 15099
.2130 - 3 - 1-3/4” 3” 18.30 15100
.2165 - - 5.5 1-3/4” 3” 18.30 15101
.2188 7/32” - - 1-3/4” 3” 18.30 15102
.2210 - 2 - 1-3/4” 3” 19.80 15103
.2280 - 1 - 1-3/4” 3” 19.80 15104
.2340 - A - 2” 3-1/4” 19.80 15105
.2344 15/64” - - 2” 3-1/4” 19.80 15106
.2362 - - 6.0 2” 3-1/4” 22.15 15107
.2380 - B - 2” 3-1/4” 22.15 15108
.2420 - C - 2” 3-1/4” 22.15 15109
.2460 - D - 2” 3-1/4” 22.15 15110
.2500 1/4” E - 2” 3-1/4” 22.15 15112
.2559 - - 6.5 2” 3-1/4” 24.50 15113
.2570 - F - 2” 3-1/4” 24.50 15114
.2610 - G - 2-1/8” 3-1/2” 24.50 15115
.2656 17/64” - - 2-1/8” 3-1/2” 24.50 15116
.2660 - H - 2-1/8” 3-1/2” 26.75 15117
.2720 - I - 2-1/8” 3-1/2” 26.75 15118
.2756 - - 7.0 2-1/8” 3-1/2” 26.75 15119
.2770 - J - 2-1/8” 3-1/2” 26.75 15120
.2810 - K - 2-1/8” 3-1/2” 26.75 15121
.2812 9/32” - - 2-1/8” 3-1/2” 26.75 15122
SERIES 1510
Fract. MetricDec.
Equiv.Wire and
Letter EDP NO.Price Flute
LengthOverallLength Fract. Metric
Dec.Equiv.
Wire andLetter EDP NO.Price
FluteLength
OverallLength
34
All drills over .042 furnished with back taper for clearance
STANDARD
DRILLS
TOLERANCES: Drill Diameters: + .0000 - .0005
.2900 - L - 2-1/8” 3-1/2” 30.50 15123
.2950 - M - 2-3/8” 4” 30.50 15124
.2953 - - 7.5 2-3/8” 4” 30.50 15125
.2969 19/64” - - 2-3/8” 4” 30.50 15126
.3020 - N - 2-3/8” 4” 30.80 15127
.3125 5/16” - - 2-3/8” 4” 30.80 15128
.3150 - - 8.0 2-3/8” 4” 33.85 15129
.3160 - O - 2-3/8” 4” 33.85 15130
.3230 - P - 2-3/8” 4” 33.85 15131
.3281 21/64” - - 2-1/2” 4” 33.85 15132
.3320 - Q - 2-1/2” 4” 36.65 15133
.3346 - - 8.5 2-1/2” 4” 36.65 15173
.3390 - R - 2-1/2” 4” 36.65 15135
.3438 11/32” - - 2-1/2” 4” 35.50 15136
.3480 - S - 2-1/2” 4” 40.80 15137
.3543 - - 9.0 2-3/4” 4-1/4” 40.80 15134
.3580 - T - 2-3/4” 4-1/4” 40.80 15139
.3594 23/64” - - 2-3/4” 4-1/4” 40.80 15140
.3680 - U - 2-3/4” 4-1/4” 42.00 15141
.3740 - - 9.5 2-3/4” 4-1/4” 42.00 15142
.3750 3/8” - - 2-3/4” 4-1/4” 41.25 15143
.3770 - V - 2-3/4” 4-1/4” 49.50 15144
.3860 - W - 2-7/8” 4-1/2” 49.50 15145
.3906 25/64” - - 2-7/8” 4-1/2” 49.50 15146
.3937 - - 10.0 2-7/8” 4-1/2” 54.15 15147
.3970 - X - 2-7/8” 4-1/2” 54.15 15148
.4040 - Y - 2-7/8” 4-1/2” 54.15 15149
.4062 13/32” - - 2-7/8” 4-1/2” 53.50 15150
.4130 - Z - 2-7/8” 4-1/2” 58.55 15170
.4134 - - 10.5 2-7/8” 4-1/2” 58.55 15151
.4219 27/64” - - 2-7/8” 4-1/2” 58.55 15152
.4331 - - 11.0 2-7/8” 4-1/2” 62.60 15153
.4375 7/16” - - 2-7/8” 4-1/2” 62.60 15154
.4527 - - 11.5 3” 4-3/4” 71.50 15155
.4531 29/64” - - 3” 4-3/4” 71.50 15156
.4688 15/32” - - 3” 4-3/4” 72.70 15157
.4724 - - 12.0 3” 4-3/4” 76.25 15158
.4844 31/64” - - 3” 4-3/4” 76.25 15159
.4921 - - 12.5 3” 4-3/4” 77.25 15160
.5000 1/2” - - 3” 4-3/4” 76.10 15161
.5312 17/32” - - 4” 6” 117.50 15162
.5625 9/16” - - 4” 6” 129.80 15163
.5938 19/32” - - 4” 6” 143.95 15164
.6250 5/8” - - 4” 6” 150.75 15165
.6562 21/32” - - 4” 6” 165.95 15166
.6875 11/16” - - 4” 6” 171.15 15167
.7188 23/32” - - 4” 6” 187.40 15171
.7500 3/4” - - 4” 6” 203.75 15168
.8750 7/8” - - 4” 6” 239.10 15169
1.000 1” - - 4” 6” 268.90 15174
.1065 - 36 5/8” 2” 9.75 15276
.1130 - 33 5/8” 2” 9.75 15277
.1250 1/8” - 5/8” 2” 8.95 15201
.1360 - 29 5/8” 2” 10.25 15278
.1406 9/64” - 5/8” 2” 10.25 15202
.1495 - 25 3/4” 2-1/2” 11.50 15279
.1562 5/32” - 3/4” 2-1/2” 11.50 15203
.1570 - 22 3/4” 2-1/2” 13.05 15280
.1719 11/64” - 3/4” 2-1/2” 13.05 15204
.1875 3/16” - 3/4” 2-1/2” 14.10 15205
.2031 13/64” - 3/4” 2-1/2” 15.85 15206
.2130 - 3 1” 2-1/2” 17.00 15281
.2188 7/32” - 1” 2-1/2” 17.00 15207
.2344 15/64” - 1” 2-1/2” 18.05 15208
.2500 1/4” - 1” 2-1/2” 18.05 15209
.2570 - F 1” 2-1/2” 19.70 15282
.2656 17/64” - 1” 2-1/2” 19.70 15210
.2720 - l 1” 2-1/2” 20.75 15283
.2812 9/32” - 1” 2-1/2” 20.75 15211
.2969 19/64” - 1-1/4” 2-3/4” 25.75 15212
.3125 5/16” - 1-1/4” 2-3/4” 25.75 15213
.3281 21/64” - 1-1/4” 2-3/4” 29.90 15214
.3438 11/32” - 1-1/4” 3” 29.90 15215
.3594 23/64” - 1-1/4” 3” 32.75 15216
.3750 3/8” - 1-1/4” 3” 32.75 15217
.3906 25/64” - 1-1/4” 3” 38.50 15218
.4062 13/32” - 1-1/4” 3” 39.75 15219
.4219 27/64” - 1-1/4” 3” 43.50 15220
.4375 7/16” - 1-1/4” 3” 44.40 15221
.4531 29/64” - 1-1/4” 3” 48.50 15222
.4688 15/32” - 1-1/4” 3” 49.25 15223
.4844 31/64” - 1-1/4” 3” 50.25 15224
.5000 1/2” - 1-1/4” 3” 51.80 15225
.5625 9/16” - 1-1/4” 3-1/2” 79.50 15256
.6250 5/8” - 1-1/2” 3-1/2” 85.05 15262
.7500 3/4” - 1-1/2” 4” 119.25 15275
Fract. MetricDec.
Equiv.Wire and
Letter EDP NO.Price Flute
LengthOverallLength Fract. Metric
Dec.Equiv.
Wire andLetter EDP NO.Price
FluteLength
OverallLength
Fract.Dec.
Equiv.Wire and
Letter EDP NO.Price Flute
LengthOverallLength Fract.
Dec.Equiv.
Wire andLetter EDP NO.Price
FluteLength
OverallLength
SERIES 1525
SERIES 1510 continued
35
STANDARD
DRILLS
TOLERANCES: Drill Diameters: + 0000 - .0005
.0625 1/16" - 3/4" 1-1/2" 17.25 15401 19.80 15424
.0781 5/64" - 7/8" 1-3/4" 17.25 15402 19.80 15425
.0938 3/32" - 1" 2" 17.25 15403 19.80 15426
.0980 - 40 1-1/4" 2-1/4" 17.25 15550 19.80 15600
.1065 - 36 1-1/4" 2-1/4" 17.25 15551 19.80 15601
.1094 7/64" - 1-1/4" 2-1/4" 17.25 15404 19.80 15427
.1130 - 33 1-1/4" 2-1/4" 16.35 15552 18.00 15602
.1250 1/8" - 1-1/4" 2-1/4" 16.35 15405 18.00 15428
.1285 - 30 1-3/8" 2-1/2" 19.10 15553 21.05 15603
.1360 - 29 1-3/8" 2-1/2" 19.10 15554 21.05 15604
.1406 9/64" - 1-3/8" 2-1/2" 19.10 15406 21.05 15429
.1495 - 25 1-3/8" 2-1/2" 20.25 15555 22.25 15605
.1562 5/32" - 1-3/8" 2-1/2" 20.25 15407 22.25 15430
.1570 - 22 1-3/8" 2-1/2" 21.70 15556 23.85 15606
.1719 11/64" - 1-5/8" 2-3/4" 21.70 15408 23.85 15431
.1875 3/16" - 1-5/8" 2-3/4" 28.00 15409 25.95 15432
.2031 13/64" - 1-3/4" 3" 29.05 15410 31.30 15433
.2130 - 3 1-3/4" 3" 29.80 15557 32.20 15607
.2188 7/32" - 1-3/4" 3" 29.80 15411 32.20 15434
.2344 15/64" - 2" 3-1/4" 32.50 15412 25.75 15435
.2500 1/4" - 2" 3-1/4" 32.50 15413 35.75 15436
.2570 - F 2-1/8" 3-1/2" 39.50 15558 41.00 15608
.2720 - I 2-1/8" 3-1/2" 40.00 15559 41.50 15609
.2812 9/32" - 2-1/8" 3-1/2" 40.00 15414 41.50 15437
.3125 5/16" - 2-3/8" 4" 46.90 15415 49.25 15438
.3438 11/32" - 2-1/2" 4" 51.30 15416 55.40 15439
.3750 3/8" - 2-1/2" 4" 51.30 15417 55.40 15440
.4062 13/32" - 2-7/8" 4-1/2" 86.80 15418 92.50 15441
.4375 7/16" - 2-7/8" 4-1/2" 86.80 15419 92.50 15442
.4688 15/32" - 3" 4-3/4" 98.00 15420 110.75 15443
.5000 1/2" - 3" 4-3/4" 98.00 15421 112.25 15444
.5000 1/2" - 4" 6" 117.50 15478 123.30 15489
.5312 17/32" - 4" 6" 149.60 15479 159.35 15490
.5625 9/16" - 4" 6" 170.15 15480 182.50 15491
.5938 19/32" - 4" 6" 185.60 15481 198.25 15492
.6250 5/8" - 4" 6" 204.05 15482 218.80 15493
.6562 21/32" - 4" 6" 217.20 15483 232.10 15494
.6875 11/16" - 4" 6" 229.50 15484 243.80 15495
.7188 23/32" - 4" 6" 242.30 15485 262.40 15496
.7500 3/4" - 4" 6" 288.75 15486 317.05 15497
.8750 7/8" - 4" 6" 331.50 15487 364.25 15498
1.0000 1" - 4" 6" 369.20 15488 405.25 15499
TWO STYLES FOR DIFFERENT TYPES OF MATERIALSSERIES 1540
SERIES 1565
For Cast Iron, Hardened Steels, Stainless Steel, Brass and Bronze
For Extremely High Speed Drilling in Aluminum, Ductile Iron, Mild Steel, Titanium and Thermoplastics
150° Thinned Point
130° Special High Performance Point
ALUMA-DRILL
NEW
SIZES
Wire/Letter
O/ALengthFraction
Cutting Length
1540
EDP NO.PriceDec.
Equiv.
1565
EDP NO.Price
36
STANDARD
DRILLS
TOLERANCES: Drill Diameters: + .0000 - .0005
CuttingLength
O/ALength
SERIES 1550
Dec.Equiv. Fract.
1550
EDP NO.Price
Series 1550 NON COATED
Series 1550 TiAIN TiAIN COATED
37
WireLetter
1550 TiAIN
EDP NO.Price
.0625 1/16” - 5/8” 1-1/2” 9.00 15522 10.50 15567
.0781 5/64” - 5/8” 1-1/2” 9.15 15502 10.65 15568
.0938 3/32” - 3/4” 1-3/4” 9.35 15523 10.85 15569
.1065 - 36 3/4” 1-3/4” 10.75 15560 12.25 15570
.1094 7/64” - 3/4” 1-3/4” 10.75 15504 12.25 15571
.1130 - 33 7/8” 2” 11.80 15561 13.30 15572
.1250 1/8” - 7/8” 2” 11.80 15524 13.30 15573
.1360 - 29 7/8” 2” 12.95 15562 15.65 15574
.1406 9/64” - 7/8” 2” 12.95 15506 15.65 15575
.1495 - 25 1” 2” 13.50 15563 15.70 15576
.1562 5/32” - 1” 2” 13.50 15525 15.70 15577
.1719 11/64” - 1” 2” 16.60 15508 18.80 15578
.1875 3/16” - 1-1/8” 2-1/4” 17.30 15526 19.50 15579
.2031 13/64” - 1-1/8” 2-1/4” 21.25 15510 25.05 15580
.2130 - 3 1-1/4” 2-1/2” 21.90 15564 25.70 15581
.2188 7/32” - 1-1/4” 2-1/2” 21.90 15527 25.70 15582
.2348 15/64” - 1-1/4” 2-1/2” 24.90 15512 28.70 15583
.2500 1/4” - 1-3/8” 2-1/2” 25.75 15528 29.55 15584
.2570 - F 1-1/2” 3” 29.50 15565 34.80 15585
.2656 17/64” - 1-1/2” 3” 29.50 15537 34.80 15586
.2720 - I 1-1/2” 3” 30.00 15566 35.30 15587
.2813 9/32” - 1-1/2” 3” 30.00 15529 35.30 15588
.2969 19/64” - 1-5/8” 3” 33.85 15538 39.15 15589
.3125 5/16” - 1-5/8” 3” 34.50 15530 41.30 15590
.3281 21/64” - 1-3/4” 3” 38.20 15539 45.00 15591
.3438 11/32” - 1-3/4” 3” 38.90 15531 45.70 15592
.3594 23/64” - 1-3/4” 3” 47.60 15540 54.80 15593
.3750 3/8” - 1-3/4” 3” 48.20 15532 55.40 15594
.3906 25/64” - 2” 3-1/2” 55.85 15541 67.20 15595
.4063 13/32” - 2” 3-1/2” 56.60 15533 67.95 15596
.4218 27/64” - 2-1/8” 3-1/2” 67.25 15542 78.60 15597
.4375 7/16” - 2-1/8” 3-1/2” 68.10 15534 79.45 15598
.4531 29/64” - 2-1/8” 4” 77.60 15543 88.95 15599
.4688 15/32” - 2-1/8” 4” 78.30 15535 89.65 15610
.4844 31/64” - 2-1/8” 4” 84.80 15544 96.15 15611
.5000 1/2” - 2-1/8” 4” 85.65 15536 95.00 15612
Specifically designed for the drilling of high temperature alloys, steel, titanium and stainless steel.
STANDARD
DRILLS
TOLERANCES: Drill Diameter: + .0000 - .0005Flute Length: +.0100 - .0100
SERIES 1590
Fract. MetricDec.
Equiv.Wire &Letter
1590
EDP NO.Price
38
.0135 - 80 - .240 7.75 15901
.0145 - 79 - .240 7.75 15902
.0156 1/64” - - .240 7.75 15903
.0160 - 78 - .240 7.75 15904
.0180 - 77 - .240 7.75 15905
.0197 - - .5 .240 5.40 15906
.0200 - 76 - .240 5.40 15907
.0210 - 75 - .300 5.40 15908
.0225 - 74 - .300 5.40 15909
.0240 - 73 - .300 5.40 15910
.0250 - 72 - .300 5.15 15911
.0260 - 71 - .300 5.15 15912
.0280 - 70 - .400 4.85 15913
.0292 - 69 - .400 4.85 15914
.0295 - - .75 .400 4.85 15915
.0310 - 68 - .400 4.85 15916
.0312 1/32” - - .400 4.85 15917
.0320 - 67 - .400 4.85 15918
.0330 - 66 - .400 4.85 15919
.0350 - 65 - .400 4.85 15920
.0360 - 64 - .400 4.85 15921
.0370 - 63 - .400 4.85 15922
.0380 - 62 - .400 4.85 15923
.0390 - 61 - .400 4.85 15924
.0394 - - 1.0 .400 4.85 15925
.0400 - 60 - .400 4.85 15926
.0410 - 59 - .400 4.85 15927
.0420 - 58 - .400 4.85 15928
.0430 - 57 - .400 4.85 15929
.0465 - 56 - .400 4.85 15930
.0469 3/64” - - .400 4.85 15931
.0492 - - 1.25 .400 4.85 15932
.0520 - 55 - .400 4.85 15933
.0550 - 54 - .400 4.85 15934
.0591 - - 1.5 .400 5.85 15935
.0595 - 53 - .400 5.85 15936
.0625 1/16” - - .400 5.85 15937
.0635 - 52 - .400 5.85 15938
.0670 - 51 - .400 5.85 15939
.0700 - 50 - .400 5.85 15940
.0730 - 49 - .400 5.85 15941
.0760 - 48 - .400 5.85 15942
.0781 5/64” - - .400 5.85 15943
.0785 - 47 - .400 5.85 15944
.0787 - - 2.0 .400 5.85 15945
.0810 - 46 - .400 5.85 15946
.0820 - 45 - .400 5.85 15947
.0860 - 44 - .400 5.85 15948
.0890 - 43 - .400 5.85 15949
.0935 - 42 - .400 5.85 15950
.0938 3/32” - - .400 5.85 15951
.0960 - 41 - .400 5.85 15952
.0980 - 40 - .400 5.85 15953
.0984 - - 2.5 .400 5.85 15954
.0995 - 39 - .400 5.85 15955
.1015 - 38 - .400 5.85 15956
.1040 - 37 - .400 5.85 15957
.1065 - 36 - .400 5.85 15958
.1094 7/64” - - .400 5.85 15959
.1100 - 35 - .400 5.85 15960
.1110 - 34 - .400 5.85 15961
.1130 - 33 - .400 5.85 15962
.1160 - 32 - .400 5.85 15963
.1181 - - 3.0 .400 5.85 15964
.1200 - 31 - .400 5.85 15965
.1250 1/8” - - .400 5.85 15900
FluteLength Fract. Metric
Dec.Equiv.
Wire &Letter
1590 cont.
EDP NO.PriceFlute
Length
STANDARD
DRILLS
TOLERANCES: Diameters: + .0000 - .0005Drill Diameters: +.003 - .000
SERIES 2305
BodyDiameter
O/ALength
ToolNumber
DrillDiameter EDP NO.
2305 60°
Price
39
Available with 60° - 82° - 90° angles
CARBIDE CENTER DRILL SETSERIES 7500
60° Angle
SET No. 16 Tools TotalSet Contains
#1, #2, #3, #4, #5, #6
Price $181.50
Furnished with wooden box with screw-on lid.
15.25 23004
14.60 23005
13.80 23300
12.65 23301
19.75 23302
21.85 23303
31.75 23304
45.75 23305
63.30 23306
100.50 23307
131.65 23308
15.25 23002
14.60 23003
13.80 23200
12.65 23201
19.75 23202
21.85 23203
31.75 23204
45.75 23205
63.30 23206
100.50 23207
131.65 23208
15.25 23000
14.60 23001
13.80 23100
12.65 23101
19.75 23102
21.85 23103
31.75 23104
45.75 23105
63.30 23106
100.50 23107
131.65 23108
000 1/8” .020 1-1/2”
00 1/8” .025 1-1/2”
0 1/8” 1/32” 1-1/2”
1 1/8” 3/64” 1-1/2”
2 3/16” 5/64” 2”
3 1/4” 7/64” 2”
4 5/16” 1/8” 2-1/8”
5 7/16” 3/16” 2-3/4”
6 1/2” 7/32” 3”
7 5/8” 1/4” 3-1/4”
8 3/4” 5/16” 3-1/2”
EDP NO.
2305 82°
Price EDP NO.
2305 90°
Price
EDP No.
75101
STANDARD
DRILLS
TOLERANCES: Drill Diameters: + .0000 - .0005
MetricO/A
LengthFract.Flute
Length
90° 1545
EDP NO.Price
40
Designed for fast and accurate spotting on NC machines, these new drills are an excellent alternative to Combined Drill & Countersink Tools. With their short flute and overall lengths, no body clearance or back taper, these drills are very rigid allowing higher feeds & speeds. The unique flute design provides several easy regrinds without the need for web thinning. Centering and chamfering can be accomplished in a single operation.
SERIES 1530
.1250 1/8” - 5/8” 2-1/2” 11.50 15450
.1875 3/16” - 3/4” 2-1/2” 14.85 15453
.1969 - 5.0 1” 2-1/2” 17.25 15456
.2362 - 6.0 1” 2-1/2” 17.90 15459
.2500 1/4” - 1” 2-1/2” 16.00 15462
.3150 - 8.0 1” 2-1/2” 24.50 15465
.3750 3/8” - 1-1/4” 3” 27.10 15468
.3937 - 10.0 1-1/4” 3” 38.55 15471
.4724 - 12.0 1-1/4” 3” 39.50 15474
.5000 1/2” - 1-1/4” 3” 39.85 15477
.0625 1/16” 3/8” 1-1/2” 9.00 15301
.0938 3/32” 7/16” 1-1/2” 9.00 15302
.1250 1/8” 1/2” 1-1/2” 8.60 15303
.1562 5/32” 9/16” 1-1/2” 10.35 15304
.1875 3/16” 11/16” 2” 11.60 15305
.2188 7/32” 11/16” 2” 14.55 15306
.2500 1/4” 13/16” 2” 16.45 15307
.2812 9/32” 7/8” 2” 20.40 15308
.3125 5/16” 7/8” 2-1/2” 23.50 15309
.3438 11/32” 15/16” 2-1/2” 26.05 15310
.3750 3/8” 1-1/8” 2-1/2” 27.55 15311
.4062 13/32” 1-1/8” 2-1/2” 32.10 15312
.4375 7/16” 1-3/16” 2-1/2” 33.05 15313
.4688 15/32” 1-3/16” 2-1/2” 38.25 15314
.5000 1/2” 1-5/16” 2-1/2” 41.05 15315
Designed for thin sheet metal and shallow hole drilling.
11.50 15350
14.85 15353
17.25 15356
17.90 15359
16.00 15362
24.50 15365
27.10 15368
38.55 15371
39.50 15374
39.85 15377
Dec.Equiv.
120° 1535
EDP NO.Price
O/ALengthFract.
FluteLength
1530
EDP NO.PriceDec.
Equiv.
SERIES 1545 - 90°
SERIES 1535 - 120°
STANDARD
DRILLS
TOLERANCES: Drill Diameters: + .000 - .0005
Wire &Letter
O/ALength
SERIES 1570
Fract.Flute
Length
1570
EDP NO.Price
41
.0469 3/64” - 3/8” 1-1/2” 9.95 17500
.0625 1/16” - 3/8” 1-1/2” 9.95 17502
.0781 5/64” - 1/2” 1-1/2” 9.95 17504
.0938 3/32” - 1/2” 2” 10.40 17506
.1065 - 36 5/8” 2” 11.30 17508
.1094 7/64” - 5/8” 2” 11.30 17510
.1130 - 33 5/8” 2” 11.85 17512
.1250 1/8” - 5/8” 2” 11.85 17514
.1406 9/64” - 3/4” 2” 12.75 17516
.1495 - 25 3/4” 2-1/2” 14.00 17518
.1562 5/32” - 3/4” 2-1/2” 14.00 17520
.1570 - 22 3/4” 2-1/2” 15.80 17522
.1719 11/64” - 3/4” 2-1/2” 15.80 17524
.1730 - 17 3/4” 2-1/2” 17.10 17526
.1875 3/16” - 3/4” 2-1/2” 17.10 17528
.2010 - 7 3/4” 2-1/2” 19.00 17530
.2031 13/64” - 3/4” 2-1/2” 19.00 17532
.2188 7/32” - 1” 2-1/2” 19.60 17534
.2344 15/64” - 1” 2-1/2” 23.60 17536
.2500 1/4” - 1” 2-1/2” 21.95 17538
.2570 - F 1” 2-1/2” 26.60 17540
.2656 17/64” - 1” 2-1/2” 26.60 17542
.2720 - I 1” 2-1/2” 27.30 17544
.2812 9/32” - 1” 2-1/2” 27.30 17546
.2969 19/64” - 1-1/4” 3” 30.00 17548
.3125 5/16” - 1-1/4” 3” 30.00 17550
.3281 21/64” - 1-1/4” 3” 28.40 17552
.3438 11/32” - 1-1/4” 3” 31.65 17554
.3594 23/64” - 1-1/4” 3” 38.50 17556
.3750 3/8” - 1-1/4” 3” 41.10 17558
.3906 25/64” - 1-1/4” 3” 46.40 17560
.4062 13/32” - 1-1/4” 3” 52.05 17562
.4219 27/64” - 1-1/4” 3” 57.25 17564
.4375 7/16” - 1-1/4” 3” 59.25 17566
.4531 29/64” - 1-1/4” 3” 62.40 17568
.4688 15/32” - 1-1/4” 3” 62.40 17570
.4844 31/64” - 1-1/4” 3” 64.10 17572
.5000 1/2” - 1-1/4” 3” 64.10 17574
The micro drill is designed for the drilling of hardened materials with a rockwell over 40RC. It will hold very close hole tolerances.
Drill depth should not exceed a ratio of 3 X the drill diameter.
Dec.Equiv.
STANDARD
DRILLS
TOLERANCES: Drill Diameters: + .000 - .001
Wire and Letter
O/ALength
SERIES 40CT
FractionFlute
Length
40CT
EDP NO.Price
42
1/8” - 1-5/8” 2-3/4” 10.50 40803
- 30 1-5/8” 2-3/4” 10.70 40841
- 29 1-3/4” 2-7/8” 11.00 40836
- 28 1-3/4” 2-7/8” 11.30 40835
9/64” - 1-3/4” 2-7/8” 11.45 40856
- 27 1-7/8” 3” 11.50 40833
- 26 1-7/8” 3” 11.30 40832
- 25 1-7/8” 3” 11.30 40830
- 24 2” 3-1/8” 11.30 40829
- 23 2” 3-1/8” 11.30 40827
5/32” - 2” 3-1/8” 11.30 40848
- 22 2” 3-1/8” 12.15 40826
- 21 2-1/8” 3-1/4” 12.15 40824
- 20 2-1/8” 3-1/4” 12.15 40823
- 19 2-1/8” 3-1/4” 12.15 40820
- 18 2-1/8” 3-1/4” 12.15 40819
11/64” - 2-1/8” 3-1/4” 12.15 40807
- 17 2-3/16” 3-3/8” 12.15 40817
- 16 2-3/16” 3-3/8” 12.15 40816
- 15 2-3/16” 3-3/8” 11.90 40813
- 14 2-3/16” 3-3/8” 11.90 40812
- 13 2-5/16” 3-1/2” 11.90 40809
3/16” - 2-5/16” 3-1/2” 11.90 40839
- 12 2-5/16” 3-1/2” 12.40 40808
- 11 2-5/16” 3-1/2” 12.40 40805
- 10 2-7/16” 3-5/8” 12.40 40804
- 9 2-7/16” 3-5/8” 12.65 40854
- 8 2-7/16” 3-5/8” 12.65 40853
- 7 2-7/16” 3-5/8” 12.65 40850
13/64” - 2-7/16” 3-5/8” 13.05 40811
- 6 2-1/2” 3-3/4” 13.05 40849
- 5 2-1/2” 3-3/4” 13.05 40846
- 4 2-1/2” 3-3/4” 13.05 40845
- 3 2-1/2” 3-3/4” 13.05 40838
7/32” - 2-1/2” 3-3/4” 13.05 40852
- 2 2-5/8” 3-7/8” 13.55 40822
- 1 2-5/8” 3-7/8” 13.55 40800
- A 2-5/8” 3-7/8” 14.70 40857
15/64” - 2-5/8” 3-7/8” 14.70 40815
- B 2-3/4” 4” 14.70 40858
- C 2-3/4” 4” 14.70 40859
- D 2-3/4” 4” 14.70 40860
1/4” E 2-3/4” 4” 14.10 40802
- F 2-7/8” 4-1/8” 16.90 40862
- G 2-7/8” 4-1/8” 16.90 40863
17/64” - 2-7/8” 4-1/8” 16.90 40818
- H 2-7/8” 4-1/8” 16.90 40864
- I 2-7/8” 4-1/8” 16.90 40865
- J 2-7/8” 4-1/8” 17.30 40866
- K 2-15/16” 4-1/4” 17.30 40867
9/32” - 2-15/16” 4-1/4” 16.50 40855
- L 2-15/16” 4-1/4” 17.30 40868
- M 3-1/16” 4-3/8” 19.10 40869
19/64” - 3-1/16” 4-3/8” 16.90 40821
- N 3-1/16” 4-3/8” 18.65 40870
5/16” - 3-3/16” 4-1/2” 17.85 40847
- O 3-3/16” 4-1/2” 18.25 40871
- P 3-5/16” 4-5/8” 19.50 40872
21/64” - 3-5/16” 4-5/8” 19.05 40825
- Q 3-7/16” 4-3/4” 19.90 40873
- R 3-7/16” 4-3/4” 19.50 40874
11/32” - 3-7/16” 4-3/4” 19.05 40806
- S 3-1/2” 4-7/8” 21.05 40875
- T 3-1/2” 4-7/8” 21.05 40876
23/64” - 3-1/2” 4-7/8” 20.20 40828
- U 3-5/8” 5” 20.70 40877
3/8” - 3-5/8” 5” 20.25 40840
- V 3-5/8” 5” 21.05 40878
- W 3-3/4” 5-1/8” 23.05 40879
25/64” - 3-3/4” 5-1/8” 22.00 40831
- X 3-3/4” 5-1/8” 23.10 40880
- Y 3-7/8” 5-1/4” 23.10 40881
13/32” - 3-7/8” 5-1/4” 22.00 40810
- Z 3-7/8” 5-1/4” 25.45 40882
27/64” - 3-15/16” 5-3/8” 23.80 40834
7/16” - 4-1/16” 5-1/2” 23.80 40851
29/64” - 4-3/16” 5-5/8” 27.35 40837
15/32” - 4-5/16” 5-3/4” 26.80 40814
31/64” - 4-3/8” 5-7/8” 30.05 40843
1/2” - 4-1/2” 6” 30.05 40801
Wire and Letter
O/ALengthFraction
FluteLength
40CT continued
EDP NO.Price
STANDARD
DRILLS
CuttingDiameter
O/ALength
SERIES 40TL
FluteLength
40TL
EDP NO.Price
43
1/8” 2-3/4” 5-1/8” 14.25 40886
9/64” 3” 5-3/8” 16.35 40908
5/32” 3” 5-3/8” 14.90 40925
11/64” 3-3/8” 5-3/4” 14.90 40889
3/16” 3-3/8” 5-3/4” 15.25 40910
13/64” 3-5/8” 6” 16.10 40892
7/32” 3-5/8” 6” 16.10 40923
15/64” 3-3/4” 6-1/8” 18.20 40895
1/4” 3-3/4” 6-1/8” 20.45 40885
17/64” 3-7/8” 6-1/4” 20.45 40897
9/32” 3-7/8” 6-1/4” 22.05 40906
19/64” 4” 6-3/8” 22.05 40899
5/16” 4” 6-3/8” 22.05 40924
21/64” 4-1/8” 6-1/2” 24.20 40901
11/32” 4-1/8” 6-1/2” 24.20 40888
23/64” 4-1/4” 6-3/4” 26.55 40903
3/8” 4-1/4” 6-3/4” 26.55 40912
25/64” 4-3/8” 7” 29.30 40905
13/32” 4-3/8” 7” 29.30 40891
27/64” 4-5/8” 7-1/4” 33.80 40907
7/16” 4-5/8” 7-1/4” 33.80 40913
29/64” 4-3/4” 7-1/2” 37.25 40909
*3/32” - 2” 9.50 40953
*1/8” - 2” 9.50 40931
*5/32” - 2” 9.75 40958
11/64” 1-1/2” 3-1/2” 21.05 40934
3/16” 1-1/2” 3-1/2” 20.25 40952
13/64” 1-3/4” 3-3/4” 20.25 40937
7/32” 1-3/4” 3-3/4” 20.25 40962
15/64” 2” 4” 21.60 40940
1/4” 2” 4” 21.60 40930
17/64” 2-1/4” 4-1/4” 22.40 40942
9/32” 2-1/4” 4-1/4” 22.80 40966
19/64” 2-1/2” 4-1/2” 23.70 40944
5/16” 2-1/2” 4-1/2” 23.90 40957
21/64” 2-3/4” 4-3/4” 25.05 40946
11/32” 2-3/4” 4-3/4” 25.80 40933
23/64” 3” 5” 26.35 40948
3/8” 3” 5” 27.40 40955
25/64” 3” 5” 31.95 40949
13/32” 3” 5-1/4” 31.95 40936
27/64” 3” 5-1/2” 37.15 40950
7/16” 3” 5-1/2” 37.15 40961
29/64” 3-1/4” 5-3/4” 40.85 40951
15/32” 3-1/4” 5-3/4” 40.85 40939
31/64” 3-1/2” 6” 43.85 40956
1/2” 3-1/2” 6” 43.85 40929
17/32” 3-1/2” 6” 47.05 40941
9/16” 3-1/2” 6” 56.75 40965
19/32” 4” 7” 60.05 40943
5/8” 4” 7” 58.65 40960
21/32” 4-1/2” 7-1/2” 67.10 40945
11/16” 4-1/2” 7-1/2” 67.10 40932
23/32” 4-3/4” 8” 69.70 40947
3/4” 4-3/4” 8” 72.35 40954
13/16” 4-3/4” 8” 150.15 40935
7/8” 4-3/4” 8” 153.45 40964
15/16” 4-3/4” 8” 170.90 40938
1” 4-3/4” 8” 181.30 40927
CuttingDiameter
O/ALength
FluteLength
40HD
EDP NO.Price
CuttingDiameter
O/ALength
FluteLength
40TL continued
EDP NO.Price
CuttingDiameter
O/ALength
FluteLength
40HD continued
EDP NO.Price
SERIES 40HD
*Solid Carbide Throughout (flat drill style)
15/32” 4-3/4” 7-1/2” 37.25 40894
31/64” 4-3/4” 7-3/4” 39.10 40914
1/2” 4-3/4” 7-3/4” 39.10 40884
33/64” 4-3/4” 8” 42.00 40915
17/32” 4-3/4” 8” 43.00 40896
35/64” 4-7/8” 8-1/4” 45.15 40916
9/16” 4-7/8” 8-1/4” 43.40 40904
37/64” 4-7/8” 8-3/4” 45.80 40917
19/32” 4-7/8” 8-3/4” 46.65 40898
39/64” 4-7/8” 8-3/4” 52.80 40918
5/8” 4-7/8” 8-3/4” 52.80 40926
41/64” 5-1/8” 9” 53.85 40919
21/32” 5-1/8” 9” 53.85 40900
43/64” 5-3/8” 9-1/4” 54.40 40920
11/16” 5-3/8” 9-1/4” 55.30 40887
45/64” 5-5/8” 9-1/2” 55.30 40921
23/32” 5-5/8” 9-1/2” 56.15 40902
47/64” 5-7/8” 9-3/4” 56.15 40922
3/4” 5-7/8” 9-3/4” 57.00 40911
13/16” 6-1/8” 10” 61.95 40890
7/8” 6-1/8” 10” 65.55 40893
1” 6-3/8” 11” 74.35 40883
STANDARD
DRILLS
TOLERANCES: Drill Diameters: + .0000 - .0005
SERIES 1555
44
.1250 1/8” 7/8” 2” 12.35 15812
.1562 5/32” 1” 2” 15.00 15815
.1875 3/16” 1” 2-1/2” 18.60 15818
.2188 7/32” 1-1/4” 2-1/2” 22.20 15821
.2500 1/4” 1-3/8” 2-1/2” 24.30 15825
.2812 9/32” 1-1/2” 3” 36.85 15828
.3125 5/16” 1-5/8” 3” 37.75 15831
.3438 11/32” 1-3/4” 3” 47.50 15834
.3750 3/8” 1-7/8” 3” 50.60 15837
.4062 13/32” 2” 3-1/2” 65.85 15840
.4375 7/16” 2-1/8” 4” 67.70 15843
.4688 15/32” 2-1/8” 4” 70.75 15846
.5000 1/2” 2-1/4” 4” 75.10 15850
SUGGESTED STARTING SPEEDS & FEEDS
SERIES 1585
Drill Depth should not exceed a ratio of 3 times Drill Diameter.
Special diameters and lengths available on request.
* Use water soluble emulsion flood coolant.* * Use lower feeds for best results in controlling hole accuracy where better surface finishes are required.
Cast Iron 90 - 200 90 - 160 .003 - .012 .002 - .006
Non-Ferrous
Alloy 120 - 260 130 - 200 .004 - .012 .002 - .003
The parabolic flute drill features open fluting, heavy parallel web and high helix. It is excellent for deep hole drilling in holes 12 or more diameters deep.
.0625 1/16” 3/4” 1-1/2” 12.50 15501
.0938 3/32” 1” 2” 12.95 15503
.1250 1/8” 1-1/4” 3” 20.90 15505
.1562 5/32” 1-1/2” 3” 24.85 15507
.1875 3/16” 2” 4” 27.85 15509
.2188 7/32” 2-1/2” 4” 30.90 15511
.2500 1/4” 3” 4-1/2” 35.30 15513
.2812 9/32” 3-1/4” 4-1/2” 41.35 15514
.3125 5/16” 3-1/4” 4-3/4” 44.00 15515
.3438 11/32” 3-1/2” 5” 73.40 15516
.3750 3/8” 4” 6” 75.60 15517
.4062 13/32” 4” 6” 98.25 15518
.4375 7/16” 4” 6” 100.30 15519
.4688 15/32” 4” 6” 103.50 15520
.5000 1/2” 4” 6” 105.45 15521
Fract.O/A
LengthDec.
Equiv.Flute
Length
1555
EDP NO.Price
Fract.O/A
LengthDec.
Equiv.Flute
Length
1585
EDP NO.Price
Material *Speed ** Feed (ipr)Heavy Duty Fine Finishing Heavy Duty Fine Finishing
Special diameters and lengths available on request.
SPECIALTY
DRILLS
The DB (Drill Burnishing) Drill has two straight flutes with four margins, this creates a burnishing action for unsurpassed hole straightness and close tolerances. The drill point is self centering.
TOLERANCES: Drill Diameters: + .0000 - .0005
FluteLength
O/ALength
SERIES 1566
Dec.Equiv. EDP NO.Price
45
The Poly Drill, a patented tool will produce burr-free holes, in fiber reinforced thermoplastics and composite materials. These materials are used in the automotive, appliance and recreation industries.
.1969 5.0 1-1/4” 3 5/8” 66.48 15660
.2362 6.0 1-1/4” 4” 78.10 15662
.2500 *1/4” 1-1/2” 4” 81.25 15676
.2559 6.5 1-1/2” 4 1/8” 84.86 15663
.2756 7.0 1-1/2” 4 1/8” 94.90 15664
.2953 7.5 1-1/2” 4 3/8” 99.20 15665
.3150 8.0 1-1/2” 4 1/2” 107.00 15666
.3346 8.5 1-1/2” 4 3/4” 110.18 15667
.3543 9.0 1-1/2” 4 7/8” 115.78 15668
.3740 9.5 1-1/2” 5” 117.08 15669
.3937 10.0 1-1/2” 5 1/8” 132.05 15670
.4134 10.5 1-1/2” 5 3/8” 137.59 15671
.4331 11.0 1-1/2” 5 1/2” 142.50 15672
.4528 11.5 1-1/2” 5 5/8” 146.17 15673
.4724 12.0 1-1/2” 5 7/8” 150.53 15674
.5000 *1/2” 1-1/2” 6” 156.90 15678
CuttingDiameter
1566
Cutting Diameter measurements are metric unless otherwise noted.
*Measurement shown in inches.
PATENT #5636948
Series 1566 TiAlN TiAlN COATED
The Poly Drill produces a clean burr-free hole with no breakout, thereby eliminating a secondary operation of sanding or deburring.
SPECIALTY
DRILLS
SERIES 1515
46
As more new machine centers are being designed and implemented, the solid carbide coolant hole drill is becoming a major requirement for the maximum efficiency of these machines. With pressures of (100-1500 PSI) the coolant is delivered directly to the drill point and work piece. This results in lower drilling temperatures and the ability to increase feed rates by over 200%. Also, in deep vertical drilling applications, the chip is forced from the hole.
Three different drill styles are available:
SERIES 1580
SERIES 1560
2 - 30° RH Spiral FlutesSize Range: .125 - 1.000
3 - 30° RH Spiral FlutesSize Range: .250 - 1.000
2 - Straight FlutesSize Range: .165 - 1.000
Here is a sample CAD print of a solid carbide coolant fed step drill. We can design and engineer a drill for your specific application.
SPECIALTY
DRILLS
47
Material SpeedSFM
Feed (I.P.R.) 1/16 1/8 1/4 1/2 3/4
OPERATING PARAMETERS
To achieve optimal performance, attention must be paid to the following:1.) Machine utilizing tooling must have necessary rigidity to minimize spindle deflection and sufficient horsepower to perform at recommended speeds and feeds. 2.) Make sure holders and collets give good concentricity between tool and machine spindle.3.) Rigidly clamp and support workpiece to minimize deflection.4.) Use as short a drill as the application will permit to give maximum tool rigidity.5.) Use coolant, as recommended, to improve tool life. Direct the flow of coolant to the cutting edges. Insufficient or poorly directed coolant can result in poor tool life.6.) Use the correct speeds and feeds to suit the application and material being machined.7.) Resharpen or replace drills at first indication of cutting lip dulling or corner of cutting lip rounding.
Speeds and Feeds for Deep-Hole DrillingHoles which must be drilled three diameters deep or more fall into the “deep hole” drilling class and some adjustment of feeds and speeds is necessary.
The deeper the hole, the greater the tendency there is for chips to pack and clog the flutes of the drill. This increases the amount of heat generated and prevents the coolant from conducting the heat away from the point. A buildup of heat at the point will eventually result in premature failure.
Peck drilling, or the practice of drilling a short distance, then withdrawing the drill, will often reduce the chip packing. The deeper the hole, the more frequent the drill must be retracted to be effective.
A reduction in speed and feed to reduce the amount of heat generated is generally required in most deep-hole applications where coolant cannot be effectively applied.
300 - 600
150 - 400
200 - 300
125 - 225
65 - 200
200 - 300
150 - 250
150 - 300
300 - 600
75 - 200
100 - 150
50 - 100
150 - 300
100 - 200
75 - 150
50 - 100
25 - 75
40 - 100
80 - 125
40 - 100
.0008 .003 .007 .012 .015
.0008 .002 .006 .010 .012
.001 .003 .005 .010 .012
.001 .003 .005 .008 .010
.0005 .002 .004 .007 .010
.0007 .002 .003 .004 .006
.0007 .002 .003 .004 .006
.001 .003 .006 .010 .012
.001 .003 .007 .012 .015
.001 .003 .005 .009 .012
.001 .003 .005 .008 .012
.0005 .002 .004 .006 .010
.001 .002 .004 .007 .012
.001 .002 .003 .006 .010
.001 .002 .003 .004 .005
.0007 .001 .002 .003 .004
.0005 .0007 .001 .002 .003
.001 .0015 .003 .005 .008
.001 .002 .004 .006 .010
.0007 .001 .002 .005 .008
Aluminum / Aluminum Alloys
Aluminum Alloyed Si > 10%
Cast Irons
Soft
Medium
Malleable
Brass
Bronze
Coppers / Copper Alloys
Magnesium
Nickel Alloys
Stainless Steels
Free Machining
Work Hardening
Steels Low Carbon
Medium Carbon
High Tensile (35 - 40Rc)
High Tensile (40 - 45Rc)
High Tensile (45Rc +)
Tool Steels
Titanium
Soft
Hard
TOLERANCES: Reamer Dia. up to: .250 + .0002 - .0000 over: .2501 + .0003 - .0000 Shank Diameters: + .0005 - .0005
Add 20% To Decimal Sizes For .0001 TOLERANCES
SERIES 1410
L.O.C. ShankDia.
RangeO/A
Length
Straight Flutes
RH Spiral Flutes
LH Spiral Flutes
For all types of general reaming applications.
For blind holes and abrasive, ductile materi-als. Do not use for holes with interruptions unless material is reasonably soft.
Produces better finishes on hard materials such as heat-treated steels. Shear action is excellent for holes with interruptions; i.e., keyways, elongated slots, etc.
* Male Centers - All others have female centers
No. ofFlutes 1 2-5 6-11 12-24 25-49 50+
SERIES 1410R
SERIES 1410L
*.0312-.0394 3/8” 1-1/2” .0312 4 40.95 31.90 27.95 22.45 20.80 18.60
*.0395-.0484 3/8” 1-1/2” .0312 4 41.15 32.10 28.25 22.70 21.00 18.80
*.0485-.0574 3/8” 1-1/2” .0469 4 42.50 33.45 29.30 23.35 21.70 19.60
*.0575-.0654 3/8” 1-1/2” .0469 4 42.50 33.45 29.30 23.35 21.70 19.60
*.0655-.0804 1/2” 2” .0625 4 43.25 34.25 30.00 24.40 22.70 20.55
*.0805-.0964 1/2” 2” .0781 4 43.25 34.25 30.00 24.40 22.70 20.55
*.0965-.1124 5/8” 2-1/4” .0938 4 45.35 37.35 32.70 27.05 25.40 23.20
.1125-.1284 5/8” 2-1/4” .1094 4 45.35 37.35 32.70 27.05 25.40 23.20
.1285-.1444 3/4” 2-1/2” .1250 4 52.55 43.50 38.15 32.15 30.85 28.20
.1445-.1594 3/4” 2-1/2” .1406 4 52.55 43.50 38.15 32.15 30.85 28.20
.1595-.1744 7/8” 2-3/4” .1562 4 57.80 48.75 42.75 36.10 35.30 33.35
.1745-.1914 7/8” 2-3/4” .1719 4 57.80 48.75 42.75 36.10 35.30 33.35
.1915-.2234 1” 3” .1875 6 64.60 55.60 48.75 43.15 41.50 39.30
.2235-.2544 1” 3” .2188 6 68.25 61.40 54.25 49.50 47.75 45.20
.2545-.2844 1-1/8” 3-1/4” .2500 6 79.95 70.90 62.20 56.80 55.05 52.90
.2845-.3164 1-1/8” 3-1/4” .2812 6 86.60 77.55 68.10 62.50 60.80 58.65
.3165-.3484 1-1/4” 3-1/2” .3125 6 99.50 89.30 78.35 72.75 71.05 68.85
.3485-.3794 1-1/4” 3-1/2” .3438 6 103.95 93.80 82.25 76.65 74.95 72.75
.3795-.4104 1-1/2” 4” .3750 6 110.35 100.15 87.85 82.25 80.50 78.35
.4105-.4414 1-1/2” 4” .4062 6 113.75 103.55 90.85 85.30 83.80 81.40
.4415-.4724 1-1/2” 4” .4375 6 121.05 110.85 97.25 91.70 90.00 87.85
.4725-.5054 1-1/2” 4” .4688 6 127.45 117.30 102.90 97.25 96.60 93.40
48
REAMERS
TOLERANCES: Reamer Dia. up to: .250 + .0002 - .0000 over: .2501 + .0003 - .0000 Shank Diameters: + .0005 - .0005
Add 20% To Decimal Sizes For .0001 TOLERANCES
SERIES 1450
L.O.C. ShankDia.
RangeO/A
Length
49
Straight Flutes
RH Spiral Flutes
LH Spiral Flutes
For all types of general reaming applications.
For blind holes and abrasive, ductile materi-als. Do not use for holes with interruptions unless material is reasonably soft.
Produces better finishes on hard materials such as heat-treated steels. Shear action is excellent for holes with interruptions; i.e., keyways, elongated slots, etc.
*.1105-.1284 7/8” 3-1/2” .1094 4 49.70 40.70 36.05 28.85 27.00 25.85
*.1285-.1444 7/8” 3-1/2” .1250 4 54.30 45.25 39.65 33.90 30.85 29.25
*.1445-.1594 1” 4” .1406 4 55.10 46.05 36.80 34.80 31.75 29.75
*.1595-.1744 1” 4” .1562 4 56.00 46.95 41.20 38.80 35.80 33.55
*.1745-.1914 1-1/8” 4-1/2” .1719 4 56.90 47.85 41.95 39.55 36.55 34.20
.1915-.2234 1-1/4” 5” .1875 6 59.25 50.25 44.05 41.60 38.95 36.90
.2235-.2544 1-1/2” 6” .2188 6 61.45 52.45 46.00 43.90 40.90 38.75
.2545-.2844 1-1/2” 6” .2500 6 65.80 56.80 49.85 47.60 44.55 42.65
.2845-.3164 1-5/8” 6” .2812 6 68.70 59.65 52.30 49.40 46.40 45.35
.3165-.3484 1-5/8” 6” .3125 6 72.05 63.00 55.25 52.60 49.60 48.30
.3485-.3794 1-3/4” 7” .3438 6 75.80 60.85 58.60 56.00 53.40 51.60
.3795-.4104 1-3/4” 7” .3750 6 92.15 82.00 71.90 67.35 61.00 57.75
.4105-.4414 1-3/4” 7” .4062 6 95.50 85.30 76.20 69.75 64.75 59.90
.4415-.4724 1-3/4” 8” .4375 6 101.00 90.85 79.70 74.05 66.75 63.50
.4725-.5054 1-3/4” 8” .4688 6 111.70 101.55 89.10 82.35 73.75 68.60
.5055-.5670 1-7/8” 9” .5000 6 139.30 127.90 112.35 104.25 95.25 88.40
.5671-.6300 1-7/8” 9” .5625 6 158.20 146.90 128.90 120.00 111.40 103.10
.6301-.6930 2” 9-1/2” .6250 6 226.55 213.00 194.70 173.05 160.10 147.30
.6931-.7560 2” 9-1/2” .6875 6 249.05 235.45 221.85 193.15 180.45 165.70
.7561-.7870 2” 10” .7500 8 255.95 242.40 228.20 211.70 198.85 183.95
.7871-.8190 2” 10” .7812 8 280.85 267.30 250.35 233.85 219.05 200.70
.8191-.8500 2” 10” .8125 8 297.20 283.65 265.55 247.20 236.05 211.70
.8501-.8820 2” 10” .8435 8 300.35 296.95 278.90 259.60 243.90 207.25
.8821-.9120 2” 10” .8750 8 325.00 310.30 292.20 262.85 259.05 242.55
.9121-.9440 2” 10” .9062 8 336.30 321.60 302.30 283.50 261.80 254.90
.9441-.9760 2” 10” .9375 8 359.95 344.15 324.95 299.15 284.45 267.05
.9761-1.010 2” 10” .9688 8 372.40 356.60 337.35 318.20 296.40 277.10
All Reamers Have Female Centers*These Reamers Are Solid Carbide
No. ofFlutes 1 2-5 6-11 12-24 25-49 50+
SERIES 1450R
SERIES 1450L
REAMERS
TOLERANCES: Reamer Dia. up to: .250 + .0002 - .0000 over: .2501 + .0003 - .0000 Shank Diameters: + .0005 - .0005
TOLERANCES: Reamer Dia. up to: .250 + .0002 - .0000 over: .2501 + .0003 - .0000
TOLERANCES: Reamer Dia. up to: .250 + .0000 - .0002 over: .2501 + .0000 - .0003
OVER / UNDER
EDP NO.
.0280 - 70 - 3/8” 1-1/2” 4 20.80 14001 .0292 - 69 - 3/8” 1-1/2” 4 20.80 14002 .0310 - 68 - 3/8” 1-1/2” 4 20.80 14003 .0312 1/32” - - 3/8” 1-1/2” 4 20.80 14004 .0320 - 67 - 3/8” 1-1/2” 4 20.80 14005 .0330 - 66 - 3/8” 1-1/2” 4 20.80 14006 .0350 - 65 - 3/8” 1-1/2” 4 20.80 14007 .0360 - 64 - 3/8” 1-1/2” 4 20.80 14008 .0370 - 63 - 3/8” 1-1/2” 4 20.80 14009 .0380 - 62 - 3/8” 1-1/2” 4 20.80 14010
.0390 - 61 - 3/8” 1-1/2” 4 20.80 14011 .0394 - - 1.0 3/8” 1-1/2” 4 20.80 14012 .0400 - 60 - 3/8” 1-1/2” 4 21.00 14013 .0410 - 59 - 3/8” 1-1/2” 4 21.00 14014 .0420 - 58 - 3/8” 1-1/2” 4 21.00 14015 .0430 - 57 - 3/8” 1-1/2” 4 21.00 14016 .0465 - 56 - 3/8” 1-1/2” 4 21.00 14017 .0469 3/64” - - 3/8” 1-1/2” 4 21.00 14018 .0520 - 55 - 3/8” 1-1/2” 4 21.70 14019 .0550 - 54 - 3/8” 1-1/2” 4 21.70 14020
Fract.O/A
Length EDP NO. Price Dec.Size
FluteLengthWire Metric
No. ofFlutes Fract.
O/ALength EDP NO.Price
Dec.Size
FluteLengthWire Metric
No. ofFlutes
Shank diameters can be found on page 48. Shank diameters will correspond to the diameter range.
All Reamers up to .1124 have male centers. All larger sizes have female centers.
SERIES 1400
O/ALength EDP NO.Price
Dec.Size
FluteLength
No. ofFlutes
.1240 5/8” 2-1/4” .1094 4 23.20 14150 .1245 5/8” 2-1/4” .1094 4 23.20 14151 .1255 5/8” 2-1/4” .1094 4 23.20 14153 .1260 5/8” 2-1/4” .1094 4 23.20 14154 .1865 7/8” 2-3/4” .1719 4 33.35 14155 .1870 7/8” 2-3/4” .1719 4 33.35 14156 .1880 7/8” 2-3/4” .1719 4 33.35 14158 .1885 7/8” 2-3/4” .1719 4 33.35 14159 .2490 1” 3” .2188 6 45.20 14160 .2495 1” 3” .2188 6 45.20 14161.2505 1” 3” .2188 6 45.20 14163.2510 1” 3” .2188 6 45.20 14164.3115 1-1/8” 3-1/4” .2812 6 58.65 14165.3120 1-1/8” 3-1/4” .2812 6 58.65 14166.3130 1-1/8” 3-1/4” .2812 6 58.65 14167.3135 1-1/8” 3-1/4” .2812 6 58.65 14168.3740 1-1/4” 3-1/2” .3438 6 72.75 14169.3745 1-1/4” 3-1/2” .3438 6 72.75 14170.3755 1-1/4” 3-1/2” .3438 6 72.75 14171.3760 1-1/4” 3-1/2” .3438 6 72.75 14172.4365 1-1/2” 4 .4062 6 81.40 14173.4370 1-1/2” 4 .4062 6 81.40 14180.4380 1-1/2” 4 .4062 6 81.40 14181.4385 1-1/2” 4 .4062 6 81.40 14174.4990 1-1/2” 4 .4688 6 93.40 14175.4995 1-1/2” 4 .4688 6 93.40 14182.5005 1-1/2” 4 .4688 6 93.40 14183.5010 1-1/2” 4 .4688 6 93.40 14176
ShankDiameter
O/ALength EDP NO.Price
Dec.Size
FluteLength
No. ofFlutes
ShankDiameter
.1230 5/8” 2-1/4” .1094 4 23.25 14184 .1247 5/8” 2-1/4” .1094 4 23.25 14152 - - - - - - - - - - - - - - .1855 7/8” 2-3/4” .1719 4 33.35 14186 .1870 7/8” 2-3/4” .1719 4 33.35 14187 - - - - - - - - - - - - - - .2480 1” 3” .2188 6 45.90 14188 .2495 1” 3” .2188 6 45.90 14189 - - - - - - - - - - - - - -.3105 1-1/8” 3-1/4” .2812 6 58.65 14190.3120 1-1/8” 3-1/4” .2812 6 58.65 14191 - - - - - - - - - - - - - -.3730 1-1/4” 3-1/2” .3438 6 72.75 14192.3745 1-1/4” 3-1/2” .3438 6 72.75 14193 - - - - - - - - - - - - - -.4355 1-1/2” 4 .4062 6 81.40 14194.4370 1-1/2” 4 .4062 6 81.40 14195 - - - - - - - - - - - - - -.4980 1-1/2” 4 .4688 6 93.40 14196.4995 1-1/2” 4 .4688 6 93.40 14197 - - - - - - - - - - - - - -
All reamers have female centers.
1415 1420
Series 1415 OVER / UNDER
Series 1420 DOWEL PIN
DOWEL PIN
50
1415 1420
1400 1400
REAMERS
TOLERANCES: Reamer Dia. up to: .250 + .0002 - .0000 over: .2501 + .0003 - .0000 Shank Diameters: + .0005 - .0005
.0591 - - 1.5 3/8” 1-1/2” 4 21.70 14022 .0595 - 53 - 3/8” 1-1/2” 4 21.70 14023 .0625 1/16” - - 3/8” 1-1/2” 4 21.70 14024 .0635 - 52 - 3/8” 1-1/2” 4 21.70 14025 .0670 - 51 - 1/2” 2” 4 22.70 14026 .0700 - 50 - 1/2” 2” 4 22.70 14027 .0730 - 49 - 1/2” 2” 4 22.70 14028 .0760 - 48 - 1/2” 2” 4 22.70 14029 .0781 5/64” - - 1/2” 2” 4 22.70 14030 .0785 - 47 - 1/2” 2” 4 22.70 14031 .0787 - - 2.0 1/2” 2” 4 22.70 14032 .0810 - 46 - 1/2” 2” 4 22.70 14033 .0820 - 45 - 1/2” 2” 4 22.70 14034 .0860 - 44 - 1/2” 2” 4 22.70 14035 .0890 - 43 - 1/2” 2” 4 22.70 14036 .0935 - 42 - 1/2” 2” 4 22.70 14037 .0938 3/32” - - 1/2” 2” 4 22.70 14038 .0960 - 41 - 1/2” 2” 4 22.70 14039 .0980 - 40 - 5/8” 2-1/4” 4 24.60 14040 .0984 - - 2.5 5/8” 2-1/4” 4 24.60 14041 .0995 - 39 - 5/8” 2-1/4” 4 24.60 14042 .1015 - 38 - 5/8” 2-1/4” 4 24.60 14043 .1040 - 37 - 5/8” 2-1/4” 4 24.60 14044 .1065 - 36 - 5/8” 2-1/4” 4 24.60 14045 .1094 7/64” - - 5/8” 2-1/4” 4 24.60 14046 .1100 - 35 - 5/8” 2-1/4” 4 24.60 14047 .1110 - 34 - 5/8” 2-1/4” 4 24.60 14048 .1130 - 33 - 5/8” 2-1/4” 4 25.40 14049 .1160 - 32 - 5/8” 2-1/4” 4 25.40 14050 .1181 - - 3.0 5/8” 2-1/4” 4 25.40 14051 .1200 - 31 - 5/8” 2-1/4” 4 25.40 14052 .1250 1/8” - - 5/8” 2-1/4” 4 25.40 14053 .1285 - 30 - 3/4” 2-1/2” 4 30.40 14054 .1360 - 29 - 3/4” 2-1/2” 4 30.40 14055 .1378 - - 3.5 3/4” 2-1/2” 4 30.40 14056 .1405 - 28 - 3/4” 2-1/2” 4 30.40 14057 .1406 9/64” - - 3/4” 2-1/2” 4 30.40 14058 .1440 - 27 - 3/4” 2-1/2” 4 30.40 14059 .1470 - 26 - 3/4” 2-1/2” 4 30.85 14060 .1495 - 25 - 3/4” 2-1/2” 4 30.85 14061 .1520 - 24 - 3/4” 2-1/2” 4 30.85 14062 .1540 - 23 - 3/4” 2-1/2” 4 30.85 14063 .1562 5/32” - - 3/4” 2-1/2” 4 30.85 14064 .1570 - 22 - 3/4” 2-1/2” 4 30.85 14065 .1575 - - 4.0 3/4” 2-1/2” 4 30.85 14066 .1590 - 21 - 3/4” 2-1/2” 4 30.85 14067 .1610 - 20 - 7/8” 2-3/4” 4 34.90 14068 .1660 - 19 - 7/8” 2-3/4” 4 34.90 14069 .1695 - 18 - 7/8” 2-3/4” 4 34.90 14070 .1719 11/64” - - 7/8” 2-3/4” 4 34.90 14071 .1730 - 17 - 7/8” 2-3/4” 4 34.90 14072 .1770 - 16 - 7/8” 2-3/4” 4 35.30 14073 .1772 - - 4.5 7/8” 2-3/4” 4 35.30 14074
.1800 - 15 - 7/8” 2-3/4” 4 35.30 14075 .1820 - 14 - 7/8” 2-3/4” 4 35.30 14076 .1850 - 13 - 7/8” 2-3/4” 4 35.30 14077 .1875 3/16” - - 7/8” 2-3/4” 4 35.30 14078 .1890 - 12 - 7/8” 2-3/4” 4 35.30 14079 .1910 - 11 - 7/8” 2-3/4” 4 35.30 14080 .1935 - 10 - 1” 3” 6 35.30 14081 .1960 - 9 - 1” 3” 6 41.45 14082 .1968 - - 5.0 1” 3” 6 41.45 14083 .1990 - 8 - 1” 3” 6 41.45 14084 .2010 - 7 - 1” 3” 6 41.45 14085 .2031 13/64” - - 1” 3” 6 41.45 14086 .2040 - 6 - 1” 3” 6 41.45 14087 .2055 - 5 - 1” 3” 6 41.45 14088 .2090 - 4 - 1” 3” 6 41.45 14089 .2130 - 3 - 1” 3” 6 41.45 14090 .2165 - - 5.5 1” 3” 6 41.45 14091 .2188 7/32” - - 1” 3” 6 41.45 14092 .2210 - 2 - 1” 3” 6 41.45 14093 .2280 - 1 - 1” 3” 6 41.45 14094 .2344 15/-64” - - 1” 3” 6 48.10 14096 .2362 - - 6.0 1” 3” 6 48.10 14097 .2500 1/4” - - 1” 3” 6 48.10 14098 .2559 - - 6.5 1-1/8” 3-1/4” 6 55.05 14099 .2656 17/64” - - 1-1/8” 3-1/4” 6 55.05 14100 .2756 - - 7.0 1-1/8” 3-1/4” 6 55.05 14101 .2812 9/32” - - 1-1/8” 3-1/4” 6 55.05 14102 .2953 - - 7.5 1-1/8” 3-1/4” 6 61.85 14103 .2969 19/64” - - 1-1/8” 3-1/4” 6 61.85 14104 .3125 5/16” - - 1-1/8” 3-1/4” 6 61.85 14105 .3150 - - 8.0 1-1/8” 3-1/4” 6 61.85 14106 .3281 21/64” - - 1-1/4” 3-1/2” 6 71.05 14107 .3346 - - 8.5 1-1/4” 3-1/2” 6 71.05 14108 .3438 11/32” - - 1-1/4” 3-1/2” 6 71.05 14109 .3543 - - 9.0 1-1/4” 3-1/2” 6 75.00 14110 .3594 23/64” - - 1-1/4” 3-1/2” 6 75.00 14111 .3740 - - 9.5 1-1/4” 3-1/2” 6 75.00 14112 .3750 3/8” - - 1-1/4” 3-1/2” 6 75.00 14113 .3906 25/64” - - 1-1/2” 4” 6 80.55 14114 .3937 - - 10.0 1-1/2” 4” 6 80.55 14115 .4062 13/32” - - 1-1/2” 4” 6 80.55 14116 .4134 - - 10.5 1-1/2” 4” 6 83.85 14117 .4219 27/64” - - 1-1/2” 4” 6 83.85 14118 .4331 - - 11.0 1-1/2” 4” 6 83.85 14119 .4375 7/16” - - 1-1/2” 4” 6 83.85 14120 .4528 - - 11.5 1-1/2” 4” 6 91.20 14121 .4531 29/64” - - 1-1/2” 4” 6 91.20 14122 .4688 15/32” - - 1-1/2” 4” 6 91.20 14123 .4724 - - 12.0 1-1/2” 4” 6 91.20 14124 .4844 31/64” - - 1-1/2” 4” 6 95.60 14125 .4921 - - 12.5 1-1/2” 4” 6 95.60 14126 .5000 1/2” - - 1-1/2” 4” 6 95.60 14127
Shank diameters can be found on page 48. Shank diameters will correspond to the diameter range.
Fract.O/A
Length EDP NO.Price Dec.Size
FluteLengthWire Metric
No. ofFlutes Fract.
O/ALength EDP NO.Price
Dec.Size
FluteLengthWire Metric
No. ofFlutes
SERIES 1400 (continued)
51
All Reamers up to .1124 have male centers. All larger sizes have female centers.
1400 1400
REAMERS
TOLERANCES: Reamer Dia. up to: .250 + .0002 - .0000
over: .2501 + .0003 - .0000
Shank Diameters: + .0005 - .0005
*1/8” 7/8” 3-1/2” .1094 4 27.00 14511
*9/64” 7/8” 3-1/2” .1250 4 30.85 14512
*5/32” 1” 4” .1406 4 31.75 14513
*11/64” 1” 4” .1562 4 35.80 14514
*3/16” 1-1/8” 4-1/2” .1719 4 36.55 14515
13/64” 1-1/4” 5” .1875 6 38.95 14516
7/32” 1-1/4” 5” .1875 6 38.95 14517
15/64” 1-1/4” 6” .2188 6 41.45 14518
1/4” 1-1/2” 6” .2188 6 41.45 14519
17/64” 1-1/2” 6” .2500 6 44.60 14520
9/32” 1-1/2” 6” .2500 6 44.60 14521
19/64” 1-5/8” 6” .2812 6 46.40 14522
5/16” 1-5/8” 6” .2812 6 46.40 14523
21/64” 1-5/8” 6” .3125 6 49.60 14524
11/32” 1-5/8” 6” .3125 6 49.60 14525
23/64” 1-3/4” 7” .3438 6 53.40 14526
3/8” 1-3/4” 7” .3438 6 53.40 14527
25/64” 1-3/4” 7” .3750 6 61.05 14528
13/32” 1-3/4” 7” .3750 6 61.05 14529
27/64” 1-3/4” 7” .4062 6 64.75 14530
7/16” 1-3/4” 7” .4062 6 64.75 14531
29/64” 1-3/4” 8” .4375 6 68.75 14532
15/32” 1-3/4” 8” .4375 6 68.75 14533
31/64” 1-3/4” 8” .4688 6 73.70 14534
1/2” 1-3/4” 8” .4688 6 73.70 14535
9/16” 1-7/8” 9” .5000 6 112.25 14536
5/8” 1-7/8” 9” .5625 6 128.85 14537
11/16” 2” 9-1/2” .6250 6 194.70 14538
3/4” 2” 9-1/2” .6875 6 221.85 14539
7/8” 2” 10” .8435 8 278.85 14540
1” 2” 10” .9688 8 337.40 14541
All tools have female centers
*These tools are solid carbide.
O/ALength
CuttingDiameter
Flute Length
ShankDiameter
No. ofFlutes Price EDP No.
SERIES 1450
52
1450
REAMERS
SpeedSFM
53
100 - 300
75 - 200
75 - 150
60 - 100
40 - 100
75 - 175
65 - 125
75 - 150
150 - 250
50 - 90
50 - 90
30 - 75
60 - 125
100 - 150
90 - 125
60 - 100
30 - 90
60 - 100
50 - 125
20 - 60
Material Feed (I.P.R.)1/8 1/4 1/2
Stock Removal
Sufficient amount of stock should be left in the work area to permit the reamer to cut rather than to burnish or glaze.
The amount of stock removal for machine reaming:
1/4”
1/4” - 1/2”
1/2” - 1”
1” - 1-1/2”
.008 - .010
.012 - .015
.017 - .020
.020 - .025
REAMERDIAMETER
SUGGESTEDSTOCK REMOVAL
STRAIGHT FLUTES
Straight Flutes
RH Spiral Flutes
LH Spiral Flutes
For all types of general reaming applications.
For blind holes and abrasive, ductile materi-als. Do not use for holes with interruptions unless material is reasonably soft.
Produces better finishes on hard materials such as heat-treated steels. Shear action is excellent for holes with interruptions; i.e., keyways, elongated slots, etc.
RH SPIRAL FLUTES
LH SPIRAL FLUTES
The use of coolants will help produce a superior finish when reaming. Reamers are furnished with a 45 degree lead unless otherwise specified.
FLUTE STYLES
.005 .010 .015
.004 .008 .012
.005 .008 .012
.005 .008 .012
.003 .006 .010
.003 .004 .006
.003 .004 .006
.005 .008 .012
.005 .010 .015
.005 .008 .012
.005 .008 .012
.003 .006 .010
.003 .006 .010
.003 .005 .008
.003 .005 .008
.001 .004 .006
.002 .002 .004
.002 .005 .008
.003 .006 .010
.002 .004 .008
Aluminum / Aluminum Alloys
Aluminum Alloyed Si > 10%
Cast Irons: Soft
Medium
Malleable
Brass
Bronze
Coppers / Copper Alloys
Magnesium
Nickel Alloys
Stainless Steels: Free Machining
Work Hardening
Steels: Low Carbon
Medium Carbon
High Tensile (35 - 40Rc)
High Tensile (40 - 45Rc)
High Tensile (45Rc + )
Tool Steels
Titanium Soft
Hard
O/ALength
SERIES 1100D
DiameterLengthof Split
SERIES 1100D
EDP NO.Price
54
1/16” 1-1/2” 3.70 11100 -- -- -- 3/32” 2” 2.95 11101 -- -- -- 3mm 38mm 1.55 11155 -- -- -- 1/8” 1-1/2” 1.30 11102 3/8” 7.00 16121 1/8” 2” 2.10 11103 3/8” 8.00 16122 1/8” 3” 4.65 11104 3/8” 10.85 16123 1/8” 4” 6.70 11105 3/8” 14.00 16124 1/8” 6” 11.90 11106 -- -- -- 1/8” 12” 15.55 11143 -- -- -- 3/16” 2” 3.40 11107 1/2” 8.85 16182 3/16” 3” 6.95 11108 1/2” 15.05 16183 3/16” 4” 11.05 11109 1/2” 20.00 16184 3/16” 6” 16.45 11110 -- -- -- 3/16” 12” 24.65 11144 -- -- -- 6mm 63mm 6.25 11136 -- -- -- 1/4” 2” 4.75 11111 1/2” 12.75 16252 1/4” 2-1/2” 5.70 11112 1/2” 13.75 16257 1/4” 3” 6.25 11113 1/2” 17.45 16253 1/4” 4” 10.15 11114 1/2” 23.60 16254 1/4” 6” 23.80 11115 -- -- -- 1/4” 12” 36.25 11145 -- -- -- 5/16” 2-1/2” 8.65 11116 1/2” 19.25 16317 5/16” 3” 11.20 11117 1/2” 23.95 16313 5/16” 4” 16.30 11118 1/2” 27.05 16314 5/16” 6” 32.30 11119 -- -- -- 5/16” 12” 52.10 11146 -- -- -- 8mm 63mm 8.95 11140 -- -- -- 3/8” 2-1/2” 10.65 11120 1/2” 24.60 16377 3/8” 3” 13.70 11121 1/2” 27.70 16373 3/8” 4” 17.25 11122 1/2” 32.45 16374 3/8” 6” 35.80 11123 -- -- -- 3/8” 12” 67.40 11147 -- -- -- 10mm 63mm 19.85 11141 -- -- -- 7/16” 2-3/4” 16.70 11124 5/8” 35.00 16417 7/16” 3” 21.20 11125 5/8” 43.05 16413 7/16” 4” 30.40 11126 5/8” 47.60 16414 7/16” 6” 44.35 11127 -- -- -- 7/16” 12” 75.05 11148 -- -- -- 12mm 75mm 21.75 11142 -- -- -- 1/2” 3” 19.75 11128 5/8” 38.50 16503 1/2” 4” 28.00 11129 5/8” 54.60 16504 1/2” 6” 49.85 11130 -- -- -- 1/2” 12” 101.40 11149 -- -- -- 9/16” 3-1/2” 32.30 11131 -- -- -- 5/8” 3-1/2” 38.10 11132 -- -- -- 5/8” 4” 45.80 11150 -- -- -- 5/8” 6” 78.75 11151 -- -- -- 5/8” 12” 146.15 11152 -- -- -- 3/4” 4” 57.00 11133 -- -- -- 3/4” 6” 98.80 11137 -- -- -- 3/4” 12” 203.95 11153 -- -- -- 1” 4” 94.60 11134 -- -- -- 1” 6” 179.85 11139 -- -- -- 1” 12” 346.15 11154 -- -- --
SERIES 1125D
EDP NO.Price
Special Diameters And Lengths Available On Quote
SERIES 1125D • Split Both Ends
TOLERANCES: Cutter Diameters: + .010 - .010Shank Diameters: +.0000 - .0005
NominalCutter Dia.
O/ALength
SERIES 4375
AmericanStandards
FaceWidth
203 3/8” 1/16” .203 2-1/16” 8 57.15 43302
303 3/8” 3/32” .203 2-3/32” 8 57.15 43303
403 3/8” 1/8” .203 2-1/8” 8 57.70 43403
204 1/2” 1/16” .250 2-1/16” 10 58.00 43240
304 1/2” 3/32” .250 2-3/32” 10 59.50 43304
404 1/2” 1/8” .250 2-1/8” 10 60.25 43404
305 5/8” 3/32” .281 2-3/32” 10 64.05 43305
405 5/8” 1/8” .281 2-1/8” 10 65.30 43405
505 5/8” 5/32” .281 2-5/32” 10 65.95 43505
605 5/8” 3/16” .281 2-3/16” 10 67.85 43605
406 3/4” 1/8” .281 2-1/8” 10 80.85 43406
506 3/4” 5/32” .281 2-5/32” 10 82.75 43506
606 3/4” 3/16” .281 2-3/16” 10 86.65 43606
806 3/4” 1/4” .281 2-1/4” 10 87.10 43806
507 7/8” 5/32” .281 2-5/32” 12 96.15 43507
607 7/8” 3/16” .281 2-3/16” 12 96.15 43607
707 7/8” 7/32” .281 2-7/32” 12 100.65 43707
807 7/8” 1/4” .281 2-1/4” 12 104.25 43807
608 1” 3/16” .281 2-3/16” 12 105.95 43608
708 1” 7/32” .281 2-7/32” 12 116.45 43708
808 1” 1/4” .281 2-1/4” 12 117.95 43808
*609 1-1/8” 3/16” .281 2-3/16” 14 144.90 43609
*709 1-1/8” 7/32” .281 2-7/32” 14 146.95 43709
*809 1-1/8” 1/4” .281 2-1/4” 14 148.10 43809
*610 1-1/4” 3/16” .281 2-3/16” 14 151.90 43610
*710 1-1/4” 7/32” .281 2-7/32” 14 152.95 43710
*810 1-1/4” 1/4” .281 2-1/4” 14 152.95 43810
*812 1-1/2” 1/4” .375 2-1/4” 16 175.60 43812
*1012 1-1/2” 5/16” .375 2-5/16” 16 188.60 43000
*1212 1-1/2” 3/8” .375 2-3/8” 16 192.50 43212
1/2” Dia. Shank Tolerance: +.0000 - .0005Cutting Head Tolerance:Diameter: 3/8” to 3/4” Dia.: +.010/+.015 7/8” to 1-1/2” Dia.: +.012/+.017Face Width: +.0000 - .0005Neck Length: .250
* Solid carbide one-piece construction.
All of the above keyseat cutters are available in 24 hour delivery with special face widths. (Must be smaller in thickness than standard face widths.)
COST: Add the following costs to the list price. 1 2 3 4 5-7 8-11 12-15 16 OVER
25.00 12.50 10.00 7.50 6.00 5.00 2.50 N/C
1/4” 3/32” 1/8” 32.85 43001
5/16” 3/32” 1/4” 34.10 43002
3/8” 1/8” 1/4” 42.20 43003
1/2” 1/8” 1/4” 43.50 43004
5/8” 1/8” 1/4” 44.00 43005
3/4” 5/32” 1/4” 45.50 43006
1” 3/16” 1/4” 48.15 43007
NeckDia.
No. ofFlutes Price EDP NO.
4375
41.05 43008
42.65 43009
52.75 43010
54.35 43011
55.00 43012
56.85 43013
60.20 43014
ThicknessDiameterShank
Diameter Price EDP NO.
4300
Price EDP NO.
4300R
SERIES 4300
SERIES 4300R
55
TOLERANCES: Cutter Diameters: + .015 - .015
Hole Diameters: +.0005 - .0000
Thickness Diameters: + .00025 - .00025
ThicknessRange
No. ofTeeth
SERIES 2450
DiameterHole
Diameter 1
56
To order specify series, diameter, thickness and hole size if more than one size is indicated.
1/4” .010-.035 1/8” 12 50.70 33.00 29.40 22.25 18.75 15.10
5/16” .010-.035 1/8” 12 50.70 33.00 29.40 22.25 18.75 15.10
3/8” .006-.025 1/8” 14 52.65 34.90 31.35 24.20 20.70 17.05
3/8” .026-.063 1/8” 14 50.70 33.00 29.40 22.25 18.75 15.10
1/2” .006-.034 3/16” 14 52.60 34.85 32.45 24.15 20.60 17.05
1/2” .035-.063 3/16” 14 50.95 33.10 29.60 22.45 18.90 15.30
5/8” .006-.014 1/4” 16 57.85 40.10 36.50 29.40 25.80 22.25
5/8” .015-.040 1/4” 16 54.30 36.50 33.00 25.80 22.25 18.75
5/8” .041-.063 1/4” 16 53.60 35.85 31.10 25.10 21.65 18.00
3/4” .006-.014 1/4” 18 57.85 40.05 36.50 29.40 25.80 22.25
3/4” .015-.040 1/4” 18 54.35 36.50 32.95 25.80 22.25 18.70
3/4” .041-.063 1/4” 18 53.05 35.25 31.75 24.60 21.05 17.50
3/4” .064-.094 1/4” 18 58.40 40.60 37.05 29.90 26.35 22.85
3/4” .095-.125 1/4” 18 63.65 45.90 42.25 35.20 31.55 28.05
1” .010-.019 1/4”-5/16”-3/8” 20 67.80 50.05 46.45 39.35 35.80 32.25
1” .020-.040 1/4”-5/16”-3/8” 20 65.75 47.95 44.35 37.20 33.70 30.05
1” .041-.063 1/4”-5/16”-3/8” 20 61.90 44.15 40.60 33.45 29.90 26.35
1” .064-.094 1/4”-5/16”-3/8” 20 68.15 50.35 46.80 39.65 36.15 32.55
1” .095-.125 1/4”-5/16”-3/8” 20 74.30 56.55 53.00 44.10 40.50 35.85
1-1/4” .010-.019 3/8”-5/16”-1/2” 24 75.10 57.40 53.75 46.60 43.10 39.50
1-1/4” .020-.045 3/8”-5/16”-1/2” 24 69.45 51.65 48.05 41.00 37.40 33.85
1-1/4” .046-.063 3/8”-5/16”-1/2” 24 66.35 48.55 44.95 37.90 34.30 30.75
1-1/4” .064-.094 3/8”-5/16”-1/2” 24 70.95 53.20 49.55 42.50 38.95 35.30
1-1/4” .095-.125 3/8”-5/16”-1/2” 24 77.95 60.20 56.60 49.50 45.90 42.40
1-1/2” .010-.019 1/2” 36 79.40 61.60 58.10 50.95 47.40 43.75
1-1/2” .020-.045 1/2” 36 73.70 55.90 52.35 45.25 41.65 38.10
1-1/2” .046-.063 1/2” 36 71.40 53.60 50.10 42.95 39.35 35.85
1-1/2” .064-.094 1/2” 36 75.70 57.85 54.35 47.20 43.60 40.10
1-1/2” .095-.125 1/2” 36 79.50 61.70 58.15 51.00 47.45 43.95
2-5 6-11 12-24 25-49 50+
CARBIDE
SAWS
SERIES 2450 continued
57
2” 010-019 1/2”-1” 40 106.45 88.65 85.05 77.95 74.45 70.50
2” 020-045 1/2”-1” 40 97.30 79.50 75.90 68.85 65.20 61.70
2” 046-063 1/2”-1” 40 93.85 76.05 72.50 65.40 61.75 58.20
2” 064-094 1/2”-1” 40 102.50 84.75 81.20 74.05 70.50 66.95
2” 095-125 1/2”-1” 40 115.85 98.10 94.50 87.40 83.85 80.25
2-1/4” 010-019 5/8”-1” 44 114.70 96.95 93.40 86.25 82.60 79.15
2-1/4” 020-045 5/8”-1” 44 104.40 86.65 83.05 75.90 72.35 68.85
2-1/4” 046-063 5/8”-1” 44 97.00 79.15 75.70 68.55 64.95 61.35
2-1/4” 064-094 5/8”-1” 44 106.40 88.60 85.00 77.85 74.35 70.55
2-1/4” 095-125 5/8”-1” 44 120.10 102.35 98.85 91.70 88.10 84.60
2-1/2” 010-019 1” 48 118.05 91.50 96.65 89.60 85.95 82.45
2-1/2” 020-045 1” 48 107.25 89.40 85.90 78.75 75.20 71.65
2-1/2” 046-063 1” 48 102.60 84.80 81.25 74.10 70.60 67.00
2-1/2” 064-094 1” 48 119.70 101.95 98.30 91.20 87.70 84.05
2-1/2” 095-125 1” 48 133.05 115.30 111.65 104.55 101.05 97.45
2-3/4” 010-019 1” 60 151.70 133.75 130.30 123.20 119.60 116.10
2-3/4” 020-045 1” 60 136.55 118.75 115.20 108.10 104.50 101.00
2-3/4” 046-064 1” 60 128.70 110.90 107.35 100.20 96.65 93.10
2-3/4” 065-094 1” 60 146.65 128.85 125.35 118.25 114.60 111.10
2-3/4” 095-125 1” 60 169.15 151.35 147.60 140.70 137.15 133.60
3” 010-019 1” 72 167.80 149.95 146.35 139.30 135.75 132.15
3” 020-045 1” 72 155.75 138.00 134.45 127.30 124.80 120.15
3” 046-064 1” 72 144.90 127.15 123.50 116.45 112.80 109.30
3” 065-094 1” 72 162.75 144.90 141.30 134.15 130.65 127.15
3” 095-125 1” 72 188.15 170.45 166.80 159.70 156.15 152.55
3” 126-188 1” 72 224.65 206.85 203.25 196.15 192.65 189.00
3” 189-250 1” 72 250.10 232.25 228.75 221.45 218.05 214.55
3-1/2” 020-039 1” 76 182.45 164.60 161.10 154.00 149.50 146.85
3-1/2” 040-064 1” 76 166.00 148.15 144.30 137.55 133.90 130.40
3-1/2” 065-094 1” 76 183.75 166.00 162.45 155.30 151.75 148.20
3-1/2” 095-125 1” 76 232.25 214.55 210.80 203.60 200.35 196.70
4” 020-039 1” 80 196.70 178.95 175.30 168.20 164.60 161.10
4” 040-063 1” 80 176.05 158.25 154.60 147.55 144.00 140.50
4” 064-094 1” 80 193.75 176.05 172.50 165.40 161.80 158.10
4” 095-125 1” 80 244.45 226.70 223.10 215.95 212.40 208.85
4” 126-188 1” 80 307.00 288.25 284.60 277.60 274.00 270.80
4” 189-250 1” 80 328.85 311.05 307.50 300.50 296.80 293.20
5” 045-063 1” 100 272.50 254.50 250.85 244.30 240.85 237.35
5” 064-094 1” 100 280.30 262.85 260.00 251.85 248.30 244.75
5” 095-125 1” 100 313.75 296.25 292.35 285.20 281.65 278.10
6” 045-063 1” 120 311.60 294.40 290.85 284.00 280.70 277.15
6” 064-094 1” 120 321.25 303.50 299.85 292.65 289.25 285.65
6” 095-125 1” 120 361.75 343.95 340.50 333.05 329.60 325.15
1-3/4” .010-.019 1/2” 38 90.05 78.30 68.70 61.60 58.10 54.45
1-3/4” .020-.045 1/2” 38 82.95 65.20 61.60 54.50 50.95 47.40
1-3/4” .046-.063 1/2” 38 80.75 62.90 59.40 52.25 48.70 45.15
1-3/4” .064-.094 1/2” 38 87.30 69.60 65.95 59.25 55.30 51.70
1-3/4” .095-.125 1/2” 38 97.90 80.10 76.60 69.45 65.90 62.35
To order specify series, diameter, thickness and hole size if more than one size is indicated.
For special saws and speed and feed recommendation see page 58.
ThicknessRange
No. ofTeethDiameter
HoleDiameter 1 2-5 6-11 12-24 25-49 50+
CARBIDE
SAWS
TOLERANCES: Diameters: + .015 - .015Hole Diameters: +.0005 - .0000Thickness: +.00025 - .0002558
Feed Rate - Chip Load per tooth should be .0005 - .0015
Aluminum
Brass and Bronze, soft
Bronze, high tensile
Cast Iron - Soft Medium Hard
Magnesium
Monel
1000
750
500
450 275 175
1000
200
Steel, low carbon, soft
Steel, Alloys - to 35 Rc to 45 Rc to 55 Rc Steel, die grades, soft
Stainless Steel - Free Machining Work Hardening
Titanium alloys
400
175 125 100
150
200 125
200
Material MaterialSpeedSFM
SpeedSFM
All carbide saws are ground with a dish to the arbor hole. Saws which are to be assembled in gangs should have flat hubs with the dish to the hub diameter, to insure spacing accuracy.
Always use arbors for maximum rigidity.
Make a copy of the print below to design your own special saw.Fax to Fullerton and we will create a blueprint for your approval.
Diameter _____________________Thickness _____________________Hole Size _____________________No. of Teeth ___________________Tooth Form ___________________ q Square q Full Radius q Corner Radius_______ q Included Angle ______ q Angle______________Keyway q Square ____________ q Round _____________ q Other______________Hub Dia. ______________________Coating q TiN q TiCN q TiAlN
CARBIDE
SAWS
Single cut is a general purpose tool designed for cast
iron, steel, some copper and brass, and other ferrous
materials. It will give good material removal and good
workpiece finishes.
The addition of a chip breaker will reduce sliver size
and improve operator control at a slightly reduced
surface finish.
The double cut allows for rapid stock removal in harder
materials. The addition of the left hand flutes reduces
the pulling action, allowing better operator control. It
reduces the size of the chips and can be used at slower
than normal speeds.
The diamond cut is very effective in heat treated and
tough alloy steels, producing extremely small chips.
It offers very good operator control with good stock
removal at the sacrifice of finish. The diamond grind will
reduce tool life, however.
FAST MILLCUT #5
For use on non-ferrous and non-metallic materials.
Designed for rapid stock removal, with minimum chip
loading.
GENERAL RECOMMENDATIONSFor maximum control and to prevent whipping and chatter, insert the shank into the chuck as far as possible.
Avoid excessive pressure, which slows spindle speed and damages cutting edge. Avoid operating burr beyond normal resharpening, otherwise resultant heat and pressure will cause excessive chipping and possible braze failure.
AVAILABLE ON ALL BURR TOOLS. ADD 20% TO LIST PRICE
PRICES SHOWN ON PGS. 60 AND 61
NOTE: COARSE AND FINE CUTS ARE ONLY AVAILABLE ON QUOTE
WHEN ORDERING SPECIFY TOOL # OR EDP # AND SPECIFIC CUT REQUIRED
DIAMONDCUT #4
DOUBLECUT #3
CHIPBREAKERCUT #2
SINGLECUT #1
CUTS RECOMMENDED USE
59
ROTARY
FILES
SERIES 41 • Cylindrical
EDP NO.
CuttingLength
CuttingDiameter
ToolNumber
#1 Cut
Price
-- --
-- --
11.25 41004
-- --
-- --
-- --
15.35 41067
-- --
-- --
-- --
25.40 41102
31.65 41116
-- --
-- --
48.45 41123
-- --
1/8” 5/8” SB-12 10.45 40100
3/16” 5/8” SB-14 10.60 40107
1/4” 5/8” SB-1 9.40 40142
1/4” 1” SB-1A 11.85 40135
5/16” 3/4” SB-2 11.85 40149
5/16” 1” SB-2A 15.00 40156
3/8” 3/4” SB-3 12.90 40163
3/8” 1” SB-3A 15.50 40170
3/8” 1-1/2” SB-3B 19.50 40177
7/16” 1” SB-4 18.80 40191
1/2” 1” SB-5 20.80 40198
5/8” 1” SB-6 26.00 40212
3/4” 1/2” SB-15 36.65 40121
3/4” 3/4” SB-16 38.40 40128
3/4” 1” SB-7 39.80 40219
1” 1” SB-9 55.35 40226
1/8” 5/8” SC-12 9.80 42132
3/16” 5/8” SC-14 9.80 42139
1/4” 5/8” SC-1 9.55 42125
1/4” 1” SC-1A 10.80 42146
5/16” 3/4” SC-2 12.00 42160
5/16” 1” SC-2A 13.80 42189
3/8” 3/4” SC-3 12.10 42197
3/8” 1” SC-3A 14.15 42204
3/8” 1-1/2” SC-3B 19.15 42211
7/16” 1” SC-4 17.75 42225
1/2” 1” SC-5 20.20 42232
5/8” 1” SC-6 25.50 42171
3/4” 1” SC-7 36.30 42178
1/8” 1/8” SD-12 10.10 43132
3/16” 3/16” SD-14 10.10 43139
1/4” 1/4” SD-1 9.20 43125
5/16” 5/16” SD-2 9.05 43153
3/8” 3/8” SD-3 10.20 43160
7/16” 7/16” SD-4 13.30 43174
1/2” 1/2” SD-5 14.40 43181
5/8” 5/8” SD-6 19.50 43195
3/4” 3/4” SD-7 27.00 43202
1” 1” SD-9 42.75 43100
1/4” 1/2” SA-1x6 12.85 41042
3/8” 3/4” SA-3x6 17.00 41084
1/2” 1” SA-5x6 26.50 41105
1/4” 1/2” SB-1x6 14.15 40114
3/8” 3/4” SB-3x6 25.20 40184
1/2” 1” SB-5x6 29.00 40205
1/4” 1/2” SC-1x6 14.65 42153
3/8” 3/4” SC-3x6 18.15 42218
1/2” 1” SC-5x6 28.15 42164
1/4” 1/4” SD-1x6 13.90 43146
3/8” 3/8” SD-3x6 16.10 43167
1/2” 1/2” SD-5x6 22.60 43188
9.50 41009
9.70 41016
8.05 41002
10.50 41037
10.15 41051
13.30 41058
10.95 41065
13.60 41072
17.65 41079
16.30 41093
18.15 41100
22.60 41114
31.95 41023
33.40 41030
34.60 41121
48.15 41128
1/8” 5/8” SA-12 9.50 41007
3/16” 5/8” SA-14 9.70 41014
1/4” 5/8” SA-1 8.05 41000
1/4” 1” SA-1A 10.50 41035
5/16” 3/4” SA-2 10.15 41049
5/16” 1” SA-2A 13.30 41056
3/8” 3/4” SA-3 10.95 41063
3/8” 1” SA-3A 13.60 41070
3/8” 1-1/2” SA-3B 17.65 41077
7/16” 1” SA-4 16.30 41091
1/2” 1” SA-5 18.15 41098
5/8” 1” SA-6 22.60 41112
3/4” 1/2” SA-15 31.95 41021
3/4” 3/4” SA-16 33.40 41028
3/4” 1” SA-7 34.60 41119
1” 1” SA-9 48.15 41126
12.85 41044
17.00 41086
26.00 41107
Extended Shank
EDP NO.
#3 Cut
Price EDP NO.
#5 Cut
Price
14.65 42155
18.15 42220
28.15 42166
9.80 42134
9.80 42141
9.55 42127
10.80 42148
12.00 42162
13.80 42191
12.10 42199
14.15 42206
19.15 42213
17.75 42227
20.20 42234
25.50 42173
36.30 42180
-- --
-- --
13.35 42129
-- --
-- --
-- --
16.95 42201
-- --
-- --
-- --
28.25 42236
34.40 42175
49.00 42182
EDP NO.
CuttingLength
CuttingDiameter
ToolNumber
#1 Cut
Price
Extended Shank
EDP NO.
#3 Cut
Price EDP NO.
#5 Cut
Price
SERIES 42 • Cylindrical Ball Nose
EDP NO.
CuttingLength
CuttingDiameter
ToolNumber
#1 Cut
Price EDP NO.
#3 Cut
Price EDP NO.
#5 Cut
Price
SERIES 40 • Cylindrical End Cut
Extended Shank 14.15 40116
25.20 40186
29.00 40207
-- --
-- --
13.20 40104
-- --
-- --
-- --
18.00 40167
-- --
-- --
-- --
29.15 40202
36.40 40216
-- --
-- --
55.75 40223
-- --
10.45 40102
10.60 40109
9.40 40144
11.85 40137
11.85 40151
15.00 40158
12.90 40165
15.50 40172
19.50 40179
18.80 40193
20.80 40200
26.00 40214
36.65 40123
38.40 40130
39.80 40221
55.35 40228
Extended Shank
10.10 43134
10.10 43141
9.20 43127
9.05 43155
10.20 43162
13.30 43176
14.40 43183
19.50 43197
27.00 43204
42.75 43102
-- --
-- --
12.90 43129
-- --
14.25 43164
-- --
20.10 43185
27.20 43199
-- --
-- --
13.90 43148
16.10 43169
22.60 43190
EDP NO.
CuttingLength
CuttingDiameter
ToolNumber
#1 Cut
Price EDP NO.
#3 Cut
Price EDP NO.
#5 Cut
Price
SERIES 43 • Ball Shape
All above burrs available with #4 Diamond Cut. Add 20% to list price of #1 cut.
60
ROTARY
FILES
CuttingLength
SERIES 45 • Round Tree Shape
CuttingDiameter
ToolNumber
#1 Cut
EDP NO.Price 1/4” 5/8” SF-1 10.60 45256
3/8” 3/4” SF-3 12.75 45291
1/2” 3/4” SF-13 17.60 45263
7/16” 1” SF-4 18.05 45304
1/2” 1” SF-5 18.90 45311
5/8” 1” SF-6 26.20 45325
3/4” 1” SF-7 34.75 45332
3/4” 1-1/4” SF-14 38.95 45270
3/4” 1-1/2” SF-15 49.90 45277
1/4” 5/8” SG-1 10.60 46100
5/16” 3/4” SG-2 11.90 46128
3/8” 3/4” SG-3 12.75 46135
1/2” 3/4” SG-13 17.60 46107
1/2” 1” SG-5 18.90 46149
5/8” 1” SG-6 26.20 46163
3/4” 1” SG-7 34.75 46170
3/4” 1-1/2” SG-15 49.90 46114
3/16” 5/16” SE-11 11.15 44194
1/4” 3/8” SE-1 11.15 44187
3/8” 5/8” SE-3 11.75 44208
1/2” 7/8” SE-5 19.10 44222
5/8” 1” SE-6 26.80 44236
3/4” 1” SE-7 35.80 44243
1/4” 5/8” SH-1 12.60 49250
5/16” 3/4” SH-2 14.50 49257
1/2” 1-1/4” SH-5 27.40 49271
5/8” 1-7/16” SH-6 37.95 49285
3/4” 1-5/8” SH-7 52.40 49292
1/4” 5/8” SL-1 10.00 48250
5/16” 7/8” SL-2 12.95 48257
3/8” 1-1/16” SL-3 15.20 48271
1/2” 1-1/8” SL-4 19.35 48285
5/8” 1-5/16” SL-6 35.65 48299
3/4” 1-1/2” SL-7 52.35 48306
1/4” 1/2” SM-1 10.15 47250
1/4” 3/4” SM-2 10.90 47257
1/4” 1” SM-3 11.60 47264
1/4” 1-1/4” SM-3A 13.05 47271
3/8” 5/8” SM-4 15.65 47278
1/2” 7/8” SM-5 20.60 47285
5/8” 1” SM-6 30.10 47292
1/4” 1/2” SF-1x6 14.50 45284
3/8” 3/4” SF-3x6 18.70 45297
1/2” 1” SF-5x6 27.10 45318
14.50 45286
18.70 45299
27.10 45320
10.60 45258
12.75 45339
17.60 45265
18.05 45306
18.40 45313
26.20 45327
34.75 45334
38.95 45272
49.90 45279
14.85 45260
17.75 45294
-- --
-- --
26.45 45315
36.60 45329
-- --
-- --
-- --
#3 Cut
EDP NO.Price
#5 Cut
EDP NO.Price
Extended Shank
15.90 44203
17.70 44217
27.30 44231
1/4” 3/8” SE-1x6 15.90 44201
3/8” 5/8” SE-3x6 17.70 44215
1/2” 7/8” SE-5x6 27.30 44229
11.15 44196
11.15 44189
11.75 44210
19.10 44224
26.80 44238
35.80 44245
-- --
15.60 44191
16.35 44212
26.75 44226
-- --
-- --
SERIES 44 • Egg Shape
CuttingLength
CuttingDiameter
ToolNumber
#1 Cut
EDP NO.Price
#3 Cut
EDP NO.Price
#5 Cut
EDP NO.Price
Extended Shank
5/16” 7/8” SL-2x6 18.90 48264
3/8” 1-1/16” SL-3x6 21.15 48278
1/2” 1-1/8” SL-4x6 27.55 48292
18.90 48266
21.15 48280
27.55 48294
10.00 48252
12.95 48259
15.20 48273
19.35 48287
35.65 48301
52.35 48308
-- --
-- --
21.25 48275
27.10 48289
-- --
-- --
CuttingLength
CuttingDiameter
ToolNumber
#1 Cut
EDP NO.Price
#3 Cut
EDP NO.Price
#5 Cut
EDP NO.Price
Extended Shank
SERIES 48 • 14° Included Angle
1/4” 1/2” SG-1x6 14.50 46121
3/8” 3/4” SG-3x6 18.70 46142
1/2” 1” SG-5x6 27.10 46156
14.50 46123
18.70 46144
27.10 46158
10.60 46102
11.90 46130
12.75 46137
17.60 46109
18.90 46151
26.20 46165
34.75 46172
49.90 46116
14.85 46104
-- --
17.75 46139
-- --
26.45 46153
36.60 46167
-- --
-- --
CuttingLength
CuttingDiameter
ToolNumber
#1 Cut
EDP NO.Price
#3 Cut
EDP NO.Price
#5 Cut
EDP NO.Price
Extended Shank
SERIES 46 • Pointed Tree Shape
12.60 49252
14.50 49259
27.40 49273
37.95 49287
52.40 49294
CuttingLength
CuttingDiameter
ToolNumber
#1 Cut
EDP NO.Price
#3 Cut
EDP NO.Price
Extended Shank
SERIES 49 • Flame
10.15 47252
10.90 47259
11.60 47266
13.05 47273
15.65 47280
20.60 47287
30.10 47294
22°
14°
10°
8°
28°
28°
31°
CuttingLength
CuttingDiameter
ToolNumber
#1 Cut
EDP NO.Price
#3 Cut
EDP NO.Price Inc.
Angle
SERIES 47 • Cone Shape
All above burrs available with #4 Diamond Cut. Add 20% to list price of #1 cut.
61
5/16” 3/4” SH-2x6 20.50 49264
1/2” 1-1/4” SH-5x6 35.60 49278
20.50 49266
35.60 49280
ROTARY
FILES
FluteLength
SERIES 51 • 60° Included
DiameterTool
Number
# 3 Cut
EDP NO.Price
* 1/4” 3/16” SJ-1 9.00 51001
5/16” 1/4” SJ-2 9.90 51008
3/8” 5/16” SJ-3 10.95 51015
1/2” 7/16” SJ-5 13.60 51022
5/8” 1/2” SJ-6 18.90 51029
3/4” 5/8” SJ-7 24.90 51036
7/8” 3/4” SJ-8 32.95 51043
1” 7/8” SJ-9 39.85 51050
* 1/4” 1/8” SK-1 9.00 50250
5/16” 5/32” SK-2 9.90 50257
3/8” 3/16” SK-3 10.95 50264
1/2” 1/4” SK-5 13.60 50271
5/8” 5/16” SK-6 18.90 50278
3/4” 3/8” SK-7 24.90 50285
7/8” 7/16” SK-8 32.95 50292
1” 1/2” SK-9 39.85 50299
8.95 52252
16.95 52259
19.60 52266
25.40 52273
31.25 52280
10°
13°
16°
18°
30°
Metric size shanks
All burrs on pages 60 thru 62 with a head diameter of 5/16 or larger, with the exception of extended shanks, are available with a 6 mm diameter shank. They will retain standard fractional cutting diameters and cutting lengths.
Add $2.50 to the list price.
3mm and 6mm shank solid carbide burrs can be found on pages 65 and 66.
*Double End*Double End
9.00
9.90
10.95
13.60
18.90
24.90
32.95
39.85
51003
51010
51017
51024
51031
51038
51045
51052
#1 Cut
EDP NO.Price
9.00 50252
9.90 50259
10.95 50266
13.60 50273
18.90 50280
24.90 50287
32.95 50294
39.85 50301
FluteLengthDiameter
ToolNumber
# 3 Cut
EDP NO.Price
#1 Cut
EDP NO.Price
FluteLengthDiameter
ToolNumber
# 3 Cut
EDP NO.Price
#1 Cut
EDP NO.Price
1/4” 5/16” SN-1
3/8” 3/8” SN-2
1/2” 1/2” SN-3
5/8” 3/4” SN-6
3/4” 5/8” SN-7
10°
13°
16°
18°
30°
8.95 52250
16.95 52257
19.60 52264
25.40 52271
31.25 52278
Inc.Angle
FluteLengthDiameter
ToolNumber
# 3 Cut
EDP NO.Price
#1 Cut
EDP NO.Price Inc.
Angle
10.60 53252
19.35 53259
22.85 53266
29.20 53273
36.55 53280
10.60 53250
19.35 53257
22.85 53264
29.20 53271
36.55 53278
1/4” 5/16” SN-1E
3/8” 3/8” SN-2E
1/2” 1/2” SN-3E
5/8” 3/4” SN-6E
3/4” 5/8” SN-7E
SERIES 50 • 90° Included
SERIES 52 • Inverted Cone SERIES 53 • Inverted Cone - End Cut
All above burrs available with #4 Diamond Cut. Add 20% to list price of #1 cut.
Burr sets are available on pages 68 and 69.
62
ROTARY
FILES
SA-43 SA-42 SA-41 SB-41 SC-42 SC-41 SD-42 SD-41 SE-41 SH-41 SG-44 SG-43
59104 59102 59100 59106 59110 59108 59114 59112 59116 59128 59126 59124
59105 59103 59101 59107 59111 59109 59115 59113 59117 59129 59127 59125
SG-41 SF-42 SF-41 SM-43 SM-42 SM-41 SL-42 SL-41 SJ-42 SK-42 SN-42 SN-41
7° 14° 12° 8° 8° 60° 90° 10° 10°
Incl. Incl. Incl. Incl. Incl. Incl. Incl. Incl. Incl.
1/8” x 1/4” 1/8” x 1/2” 1/8” x 1/4” 1/8” x 5/8” 1/8” x 7/16” 1/8” x 11/32” 1/8” x 1/2” 1/8” x 3/8” 1/8” 1/8” 1/8” x 3/16” 3/32” x 1/8”
59122 59120 59118 59141 59139 59137 59135 59134 59130 59132 59145 59143
59123 59121 59119 59142 59140 59138 59136 59147 59131 59133 59146 59144
SA-53 SA-52 SC-53 SC-52 SD-53 SG-53 SF-53 SH-53 SE-53 SN-53 SM-53 SL-53
10° 16° 14°
Incl. Incl. Incl.
3/16” x 1/2” 5/32” x 1/2” 3/16” x 1/2” 5/32” x 1/2” 3/16” Ball 3/16” x 1/2” 3/16” x 1/2” 3/16” x 3/8” 3/16” x 9/32” 3/16” x 1/4” 3/16” x 1/2” 3/16” x 1/2”
71104 71102 71109 71106 71111 71130 71114 71135 71140 71121 71145 71118
SERIES 59 Price $5.20 each
Length of Cut
EDP NO.
#1 Cut
#3 Cut
All above burrs available with #4 Diamond Cut. Add 20% to list price on #1 cut.
Length of Cut
EDP NO.
#1 Cut
#3 Cut
71103 71101 71108 71105 71110 71115 71113 71116 71112 71120 71119 71117
Length of Cut
EDP NO.
#1 Cut
#3 Cut
SERIES 71 Price $8.65 each
63
1/8” x 9/16” 3/32” x 7/16” 1/16” x 1/4” 1/8” 1/8” x 9/16” 3/32” x 7/16” 1/8” 3/32” 1/8” x 1/4” 1/8” x 1/4” 1/8” x 1/2” 1/8” x 3/8”
ROTARY
FILES
SERIES 72 Price $8.60 each
Length of Cut
EDP NO.
SA-81 SC-81 SD-81 SF-81 SG-81 SL-81 SE-81 SN-81 SK-81 SJ-81
72101 72102 72103 72105 72106 72110 72104 72111 72108 72109
72121 72122 72123 72124 72125 72126 72127 72128 72129 72130
SA-51 SB-51 SD-51 SC-51 SF-51 SG-51 SM-51 SE-51 SN-51
70101 70103 70107 70105 70111 70113 70115 70109 70117
70102 70104 70108 70106 70112 70114 70116 70110 70118
5/8” 5/8” 3/16” 1/2” 1/2” 7/16” - 14° Incl. 9/32” 1/4” - 10° Incl. 90° 60°
1/2” 3/16” 1/4” 1/2” 1/2” 1/2” 1/2”-22° Incl. 3/8” 1/4”-10° Incl.
#1 Cut
#3 Cut
Length of Cut
EDP NO.
#1 Cut
#3 Cut
SERIES 70 Price $9.00 each
All above burrs available with #4 Diamond Cut. Add 20% to list price.
64
ROTARY
FILES
SERIES 59 Price $5.30 each
Length of Cut
EDP NO.
#1 Cut
#3 Cut
All above burrs available with #4 Diamond Cut. Add 20% to list price on #1 cut.
Length of Cut
EDP NO.
#1 Cut
#3 Cut
Length of Cut
EDP NO.
#1 Cut
#3 Cut
SERIES 70 Price $9.00 each
MSA-43 MSA-42 MSA-41 MSB-41 MSC-42 MSC-41 MSD-42 MSD-41 MSE-41 MSH-41 MSG-44 MSG-43
3MMx15MM 2MMx13MM 1.5MMx6MM 3MM 3MMx15MM 2MMx11MM 3MM 2MM 3MMx6MM 3MMx7MM 3MMx15MM 3MMx10MM
59303 59302 59301 59300 59305 59304 59307 59306 59308 59314 59313 59312
59511 59508 59505 59502 59517 59514 59523 59520 59526 59831 59828 59825
MSG-41 MSF-42 MSF-41 MSM-43 MSM-42 MSM-41 MSL-42 MSL-41 MSJ-42 MSK-42 MSN-42 MSN-41 7° 14° 12° 8° 8° 60° 90° 10° 10°
Inc. Inc. Inc. Inc. Inc. Inc. Inc. Inc. Inc.
3MMx8MM 3MMx15MM 3MMx8MM 3MMx16MM 3MMx11MM 3MMx9MM 3MMx13MM 3MMx10MM 3MM 3MM 3MMx5MM 2MMx3MM
59311 59310 59309 59321 59320 59319 59318 59317 59315 59316 59323 59324
59535 59532 59529 59551 59548 59545 59538 59840 59834 59837 59557 59554
MSA-51 MSB-51 MSD-51 MSC-51 MSF-51 MSG-51 MSM-51 MSE-51 MSN-51
13MM 5MM 6MM 13MM 13MM 13MM 13MM-22° Inc. 10MM 6MM-10° Inc
59560 59563 59569 59566 59575 59578 59581 59572 59584
70310 70311 70313 70312 70315 70316 70317 70314 70318
65
10°Inc.
ROTARY
FILES
MSA-12 MSA-1 MSB-12 MSB-1 MSC-12 MSC-1 MSD-12 MSD-1 MSE-1
3MMx16MM 6MMx16MM 3MMx16MM 6MMx16MM 3MMx16MM 6MMx16MM 3MM 6MM 6MMx10MM
$9.70 $8.25 $10.65 $9.60 $10.00 $9.75 $10.30 $9.40 $11.35 80101 80100 80103 80102 80105 80104 80106 80107 80108
59587 59594 59601 59604 59607 59610 59617 59620 59623
MSF-1 MSG-1 MSM-1 MSM-3 MSL-1 MSK-1 MSJ-1 MSN-1 MSN-1E
6MMx16MM 6MMx16MM 6MMx13MM 6MMx25MM 6MMx16MM 6MM 6MM 6MMx8MM 6MMx8MM
$10.80 $10.80 $10.25 $11.80 $10.20 $9.20 $9.20 $9.15 $10.80 80109 80110 80112 80113 80111 80114 80117 80115 80116
59626 59629 59645 59842 59642 59639 59636 59659 59674
Length of Cut
EDP NO.
#1 Cut
#3 Cut
All above burrs available with #4 Diamond Cut. Add 20% to list price of #1 cut.
66
SERIES 80 Prices as shown
Length of Cut
EDP NO.
#1 Cut
#3 Cut
22° 10° 14° 90° 60° 10° 10°
Inc. Inc. Inc. Inc. Inc. Inc. Inc.
ROTARY
FILES
TOLERANCES: Cutter Diameters: + .000 - .005Shank Diameters: +.0000 - .0005
CuttingLength
O/ALength
SERIES 2600
CuttingDiameter
ShankDiameter
Style A
EDP NO.Price
67
1/8” 1/2” 1/8” 1-1/2” 6.60 26125 7.15 26126 7.40 26127 7.50 26128
3/16” 5/8” 3/16” 2” 10.20 26187 10.95 26188 11.90 26189 12.10 26190
*1/4” 3/4” 1/4” 2-1/2” 11.20 26250 11.90 26251 13.05 26252 13.70 26253
*1/4” 1” 1/4” 3” 14.25 26260 15.10 26261 15.75 26262 16.50 26263
3/8” 1” 3/8” 2-1/2” 23.25 26375 26.25 26376 27.15 26377 27.80 26378
1/2” 1” 1/2” 3” 43.40 26500 46.75 26501 48.10 26502 50.50 26503
*Specify flute length or EDP number
STYLE A
No End Cut
Used for edge routing or where the end of the router is not in contact with the work piece.
STYLE B
Burr Type End Cut
Used when bottom cutting to produce an even, smooth surface with a square corner.
STYLE C
End Mill Type End Cut
Designed for bottom cutting where smooth surface and square corners are required.
STYLE D
135° Drill Point
Designed for plunging through the work piece before routing operation begins. Designed to pro-duce an even edge and leave burr-free surfaces.
Style B
EDP NO.Price
Style C
EDP NO.Price
Style D
EDP NO.Price
Style A • No End Cut
Style B • Burr Style End Cut
Style C • End Mill End Cut
Style D • 135° Drill Point
ROTARY
FILES
SERIES 6000
Displayed here are five different
sets of carbide rotary files. They
are furnished with a sturdy hard-
wood box.
SET No. 110 TOOLS · 3/8”-1/2” DIA. HEAD · 1/4” SHANK
PRICE $160.00
SET No. 212 TOOLS · 1/16”-1/8” DIA. HEAD · 1/8” SHANK
PRICE $71.50
SA-5 1/2” x 1”
SC-5 1/2” x 1”
SC-3 3/8” x 3/4”
SF-5 1/2” x 1”
SF-3 3/8” x 3/4”
SG-5 1/2” x 1”
SG-3 3/8” x 3/4”
SE-3 3/8” x 5/8”
SL-4 1/2” x 1-1/8”
14° Incl.
SD-5 1/2”
SA-43 1/8” x 9/16”
SA-42 3/32 x 7/16”
SC-42 1/8” x 9/16”
SC-41 3/32” x 7/16”
SD-42 1/8”
SE-41 1/8” x 1/4”
SH-41 1/8” x 1/4”
SG-43 1/8” x 3/8”
SF-42 1/8” x 1/2”
SM-42 1/8” x 7/16”
14° Incl.
SL-42 1/8” x 1/2”
8° Incl.
SN-42 1/8” x 3/16”
10° Incl.
EDP No.
60001 #1 Single Cut
60003 #3 Double Cut
EDP No.
60004 #1 Single Cut
60006 #3 Double Cut
68
ROTARY
FILES
69
SET No. 39 TOOLS · 1/4” DIA. HEAD · 1/8” SHANK
PRICE $80.50
SET No. 412 TOOLS · 5/32”-3/16” DIA. HEAD · 1/8” STEEL SHANK
PRICE $111.75
SET No. 510 TOOLS · 1/4” DIA. HEAD · 1/4” SHANK
PRICE $105.00
SA-51 1/2” CUT
SB-51 3/16” CUT
SD-51 1/4” CUT
SC-51 1/2” CUT
SF-51 1/2” CUT
SG-51 1/2” CUT
SM-51 1/2” CUT
22° Incl.
SE-51 3/8” CUT
SN-51 1/4” CUT
10° Incl.
SA-53 3/16” x 1/2”
SA-52 5/32” x 1/2”
SC-53 3/16” x 1/2”
SC-52 5/32” x 1/2”
SD-53 3/16” Ball
SG-53 3/16” x 1/2”
SF-53 3/16” x 1/2”
SH-53 3/16” x 3/8”
SE-53 3/16” x 9/32”
SN-53 3/16” x 1/4”
10° Incl. Taper
SM-53 3/16” x 1/2”
16° Incl. Taper
SL-53 3/16” x 1/2”
14° Incl. Taper
SA-1 1/4” x 5/8”
SA-14 3/16” x 5/8”
SC-1 1/4” x 5/8”
SC-12 1/8” x 1/2”
SF-1 1/4” x 5/8”
SG-1 1/4” x 5/8”
SE-1 1/4” x 3/8”
SM-2 1/4” x 3/4”
14° Incl.
SL-1 1/4” x 5/8”
14° Incl.
SN-1 1/4” x 5/16”
10° Incl.
EDP No.
60007 #1 Single Cut
60009 #3 Double Cut
EDP No.
60010 #1 Single Cut
60012 #3 Double Cut
EDP No.
60013 #1 Single Cut
60015 #3 Double Cut
ROTARY
FILES
SERIES 1835
O/ALength
BodyDiameter
ShankDiameter
70
* 1/8” 1/8” 1-1/2” 10.75 18617 * 3/16” 3/16” 2” 11.75 18618 * 1/4” 1/4” 2” 14.05 18625 3/8” 1/4” 2-3/4” 22.00 18637 1/2” 1/4” 3” 30.10 18650 5/8” 3/8” 2-3/4” 42.50 18662 3/4” 3/8” 3” 62.25 18675 1” 1/2” 3” 85.00 18610 1-1/4” 3/4” 3-1/4” 136.05 18612 1-1/2” 3/4” 3-1/2” 220.50 18615
* 1/8” 1/8” 1-1/2” 7.25 18253 * 1/4” 1/4” 2” 11.80 18256 3/8” 1/4” 2-3/4” 23.05 18376 1/2” 1/4” 3” 31.95 18506 5/8” 3/8” 2-3/4” 43.80 18626 3/4” 3/8” 3” 53.15 18756 1” 1/2” 3” 91.85 18106 1-1/4” 3/4” 3-1/4” 126.40 18126
* 1/8” 1/8” 1-1/2” 9.55 18122 * 1/4” 1/4” 2” 13.15 18125 3/8” 1/4” 2-3/4” 21.50 18137 1/2” 1/4” 3” 23.40 18150 5/8” 3/8” 2-3/4” 29.65 18162 3/4” 3/8” 3” 39.90 18175 1” 1/2” 3” 56.75 18110
F-002 .060 3/16” 1/8” 1-1/2” 14.75 24012 F-00 .080 3/8” 1/8” 1-1/2” 14.75 24010 F-0 .090 1/2” 1/8” 1-1/2” 14.75 24000 F-1 .120 5/8” 1/8” 1-1/2” 14.75 24001 F-2 .150 3/4” 3/16” 2” 17.60 24002 F-3 .180 1” 3/16” 2” 17.60 24003 F-4 .210 1-1/4” 1/4” 2-1/2” 22.80 24004 F-5 .240 1-1/4” 1/4” 2-1/2” 23.75 24005 F-6 .270 1-1/4” 5/16” 2-1/2” 28.85 24006 F-7 .300 1-1/4” 5/16” 2-1/2” 28.85 24007 F-8 .330 1-1/2” 3/8” 2-1/2” 39.75 24008 F-9 .360 1-1/2” 3/8” 2-1/2” 39.75 24009
Six Chatterless FlutesUse on hardened materials.
Single FluteUse on soft materials.
Three EccentricallyRelieved FlutesGeneral purpose use.
• Solid carbide
10.75 18616 11.75 18818 14.05 18825 22.00 18837 30.10 18850 42.50 18862 62.25 18875 85.00 18810136.05 18812220.50 18815
10.75 18619 11.75 18918 14.05 18925 22.00 18937 30.10 18950 42.50 18962 62.25 18975 85.00 18910 136.05 18912 220.50 18915
60°
EDP NO.Price
82°
EDP NO.Price
90°
EDP NO.Price
7.25 18254 11.80 18258 23.05 18378 31.95 18508 43.80 18628 53.15 18758 91.85 18108 126.40 18128
7.25 18255 11.80 18259 23.05 18379 31.95 18509 43.80 18629 53.15 18759 91.85 18109 126.40 18129
O/ALength
BodyDiameter
ShankDiameter
60°
EDP NO.Price
82°
EDP NO.Price
90°
EDP NO.Price
9.55 18123 13.15 18225 21.50 18237 23.40 18250 29.65 18262 39.90 18275 56.75 18210
9.55 18124 13.15 18325 21.50 18337 23.40 18350 29.65 18362 39.90 18375 56.75 18310
O/ALength
BodyDiameter
ShankDiameter
60°
EDP NO.Price
82°
EDP NO.Price
90°
EDP NO.Price
2400
EDP NO.PriceO/A
Length
Maximum Depth of
HoleShank
DiameterTool
Number
MinimumHole
Diameter
SERIES 1847
SERIES 1856
SERIES 2400
NEW
LOWER
PRICES
NEW
LOWER
PRICES
COMPUTERIZED DESIGN SYSTEM
Utilizing the latest release of AutoCAD®, we can design and build the tool to solve your chip making problems from your sample part, part print, or machine builders layout. This clear, concise blueprint assures consistency and quality. All drawings are electronically stored and backed up for future reference, and can be transmitted via internet e-mail for instan-taneous transmission of approval drawings to our customers. Whether communicating via e-mail or Fax, developing the opti-mum design of special cutting tools can be accomplished in hours rather than days or weeks.
71
Fullerton Tools selection of standard and special cutting tools is the largest within our industry. By using the finest CNC equipment, along with an integrated inspection system, we can modify standards or create new and unique cutting tools for your specific application.We will also provide on-site sales and engineering help when requested.
72
RETURNED GOODS: Always contact our customer service department to obtain a “returned goods authorization number” (RGA) prior to returning any material. Fullerton Tool Company will allow a single return of a customer’s “slow moving inventory” of standard catalog product once per year. When the return is accompanied by a stock replacement order of equal or greater value, we will issue full credit for the returned product. If the returned product is not accompanied by a stock replacement order, a 15% restocking charge will apply. All products returned must be in clean, resalable condition and in original packaging. We cannot accept any product that has been discontinued or in quantities that are unusually large compared to Fullerton’s average sales for any particular item, or any decimal size end mills, reamers and saws.
Prices effective June 17, 2002, these prices supersede all previous prices. Prices subject to change without notice.
SALES POLICY: As active members of the Industrial Supply Manufacturers Association (ISMA), we support the value added services of our partners in industrial distribution. Our products are exclusively sold through selected, authorized industrial distributors that meet our high standards of business ethics and customer service capabilities.
PAYMENT TERMS AND PRICES: Our terms are 1% - 15 days - net 30. Accounts in arrears are subject to both shipment hold and production hold. Freight is F.O.B. shipping point. Prices for special tools are subject to requoting after 30 days and catalog prices are subject to change upon 30 days notice.
CANCELLATIONS: Cancellations of orders for “standard catalog product” can be made at no charge, providing the tools have not been shipped and we have not incurred labor expense to finish to a specific size or altered standard markings or packaging. A cancellation fee will be charged in proportion to the amount of the cost accumulated on the order prior to cancellation.
CUSTOMER ALTERATIONS: Fullerton Tool Company cannot be responsible for the performance of or compliance to specifications, nor can we accept, for return, any tool that has been altered in any way by our customers. This includes surface treatments, coatings, flats, tangs, markings, or any geometry alterations.
OVER OR UNDERSHIPMENTS: Unless your order specifies “no overshipments”, Fullerton’s policy follows standard industry practice on altered standard and special orders which is to start +10% over the quantity ordered. We will ship and bill the quantity completed which could be as much as 10% over or 10% under the quantity ordered. On quantities from 1 piece to 9 pieces, our standard shipping tolerance is plus or minus 1 piece. Orders for special tooling that specify “no over and no under shipments” (exact quantities) are subject to a premium charge.
PRODUCT WARRANTY: We guarantee our products will conform to the specifications listed on customer blueprints, orders, and quotation requests. Dimensions, specifications, and tolerances not listed will be furnished to the current Fullerton Tool Company manufacturing standards. Our warranty is limited to the repair, replacement, or full credit for the tools found not to be within specifications, at our option.
GENERAL COMMUNICATIONS • STOCK CHECK • ORDER ENTRY
Sue Turner ...........................................Ext. 207Julie Browne.........................................Ext. 208Lisa Mullikin..........................................Ext. 209
SALES AND ENGINEERING
Dick Terry .............................................. Ext. 218Tom McKimmy ...................................... Ext. 222
Jodi Hammis.................................... Ext. 214Brenda Simerson............................. Ext. 212Julie Hausbeck ................................ Ext. 217
EXPEDITE OR FOLLOW-UP • CANCEL AN ORDER
Linda Smith ..........................................Ext. 213
QUOTATION REQUESTS, GENERAL QUOTATION INFORMATION
Morgan V. Curry ...................................Ext. 219Patrick Curry.........................................Ext. 202
Arleen Wilson ...................................Ext. 216
ENGINEERING AND APPLICATION • CAD-CAM SYSTEM
Bill Rexius.............................................. Ext. 230Steve Oszust ......................................... Ext. 232
PRODUCTION CONTROL
Franz Donze.......................................... Ext. 204
Bill Rexius.........................................Ext. 230Morgan V. Curry ...............................Ext. 219
Ron Chrcek ......................................Ext. 231
INVOICE PROBLEMS • CREDIT ON AN ORDER
Julie Hausbeck ...................................... Ext. 217
GENERAL ACCOUNTING INFORMATION
Bruce Miller ........................................... Ext. 240 Marcia Huggard................................Ext. 238
In situations where you are not completely satis-fied with a problem contact one of the following:
Dick Curry Executive Vice President..........Ext. 203Mark Turner Vice Pres. & General Mgr.........Ext. 223Morgan Curry President ..................................Ext. 221
Fullerton Tool Co., Inc.121 Perry Street • Saginaw, MI 48602
800-248-8315 or 989-799-4550FAX 989-792-3335E-mail: [email protected]//www.fullertontool.com
CATALOG REQUEST • Catalog EDP# 99999
Kathy McNally ...................................... Ext. 206
73
FULLERTON
TEAM
Julie Browne.................................... Ext. 208
