Full Name: KIZAMBANGU KAWUMBA JOAO

Date of Birth: 11 de November de 1967

Nationality: Angolan

B.I. nº 001644487UE034

Passport Number 1961623

Contact Address: Rua 2 Cazenga / Luanda / Angola

Contact Telephone: 00244923677120 / 00244995321656

Contact E-mail: majorcadet@gmail.com / majorcadet@hotmail.fr

QUALIFICATION HELD

1. Graduated in electricity

COURSE ATTENDED

1. ASNT LEVEL II in MPI / BIT INSPECTION TECHNOLOGY (India).

2. ASNT LEVEL II in RT / BIT INSPECTION TECHNOLOGY (India).

3. ASNT LEVEL II in PT / BIT INSPECTION TECHNOLOGY (India).

4. AST LEVEL II in UT / BIT INSPECTION TECHNOLOGY (India).

5. ASNT LEVEL II in RFI / BIT INSPECTION TECHNOLOGY (India).

6. ASNT LEVEL II in VT / BIT INSPECTION TECHNOLOGY (India).

QUALITY CONTROLE AND INSPECTION EXPERIENCE

1. QAQC and QC NDT site Friedlander Porto Aboim 2012 to 2016:

- Conducting Mechanical Testing, Hydro Testing, NDT, RT Film Interpretation.

- Monitoring Welding activities, NDT, Mechanical activities, Materiel Inspection and

related documentations.

- Check qualification of welder, witness actual welding of test specimen for PQR and WQT

and make sure it is in accordance with procedure.

- Follow-up and completion of structure piping work for visible weld defect, dimensional,

weld size, type of defect of weld etc.…, in conformance with approved drawings, and

work order specifications.

- Verify traceability of materials and Monitoring lighting materials and equipment.

- Verify alignment and dimensions of pipe spools.

- Emission of welding Maps and built drawings.

- Preparation of daily welding reports and inspection report (as per welding map).

- Review of Manufacturing Data Book, Inspection, Test plan, Materials Certificates and all

stages of final Inspection

- Preparing and Implementing Inspection Test Plan for various activities involved in the

constructions of Deck, GRE, Piping, Tank as project specification and relevant

international standard and getting approval from the client.

- Performing welding procedure qualification record (PQR) in case of variation in the

essential variable with existing PQR as per international standard and additioional

requirement of client.

- Performing welder qualification test for various welding procedure specification as per

ASME B31.3, API1104, AWS D1.1 ect...

- Coordinating with client and contractor in association department at various stage of

fabrications activities and getting approval.

- Convertisant with international codes like ASME Section VI, V, VIII,XI, ASME B31.3, AWS

D1.1, API 1104, API650, API 5L etc...

- Coordinating materials controler for incoming inspection of various steels materials

consumable, tools materials and equipemente with relevany document like materiel test

certificates confirm as project specification and relevant international standarf

- Visual inspection of carbon steel SAW, Pipe for length ovality straightness and common

discontiniitiez as per the approval parmeters sit by API 5L/ client.

- Welding inspection of various piping materials like carbone steel, low alloy steel,

stainless steel etc.

- arrangement and analisation of drawing according to job number.

- resposability including Monitoring.TOM A WAC syste in ordre to get final material

traceabelity report.

- cheeck dimensional material traceability, orientation and cleanliness after conplision of

spool fabrication.

- colection of inspection reccord maintain and up date inspection and test status.

EXPERIENCE AS QC IN FRIEDLANDER ANGOLA

- August 2012 to July 2014, follow-up and traceability for fabrication and hydro test of

GRE piping on NGOMA module.

- August 2012 offshore basket fabrication for VETCOGRAY drafting of manufacture Record

Book, vendor data book, follow-up, VT and MPI.

- September 2012 offshore basket fabrication for CERTEX drafting of Manufacture Record

Vendor date book, VT and MPI

- September 2012 offshore basket fabrication for SAIPEM drafting of Manufacture Record

Vendor date book, VT and MPI

- February 2013 offshore basket fabrication for SONANGOL (TEPA) drafting of

Manufacture Record Vendor date book, VT and MPI.

- January 2014 offshore basket fabrication for PAENAL) drafting of Manufacture Record

Vendor date book, VT and MPI.

- March 2014 offshore frame fabrication for TOTAL drafting of Manufacture Record

Vendor date book, VT and MPI.

- April 2015, follow-up and traceability for fabrication and hydro test of GRE piping on

MAFUMEIRA PROJECT module

- Plus, various project GIRRASOL:

1. GIR-2014-883

2. GIR-2015-627

3. GIR-2014-891

4. GIR-2014-024

5. GIR-2014-230

6. CLV-2015-003

7. CLV-2015-008

8. CLV-2015-115

9. GIR-2016-039

10. GIR-2016-079

EXPERIENCE AS QC IN PROELE / REFINERY SHUT DOWN 2018.

1. Monitoring hydro test and make hydro test reporting

2. Visual inspection for welding

3. make NDT request for inspection.

4. Responsible for witness welding, NDT and test pressure valve PSV

EXPERIENCE AS QC INSPECTOR IN PROMETIM 28/02/2019.

1. Verify traceability of materials and Monitoring materials and equipment.

2. Responsible for witness welding, NDT and Pressure test

3. I support welding and NDT activities for following up and supervising the inspection of all

welding and NDT activities associated with different types of the weld.

4. Preparation and witness of daily Pressure test reports of the valves and PSV.

SPECIFIC SKILLS

Languages: Portuguese, English and French.

Informatics’ skill: Pack office.