Full brochure download - Radiant Lighting · The system can bend and twist in three dimensions to...
Transcript of Full brochure download - Radiant Lighting · The system can bend and twist in three dimensions to...
Introduction Welcome to the Radiant Architectural Lighting products catalogue. The Radiant range has been developed in close collaboration with lighting designers and architects. Our aim is to provide innovative lighting solutions for their projects around the world. With many years of luminaire development experience, we incorporate the most appropriate new lighting technologies and manufacturing processes to produce durable and efficient lighting systems. Radiant systems are designed for flexibility, adjustability and performance to provide discreet lighting that fits any building shape or size. All Radiant products can be configured and adapted to suit particular architectural solutions but always with one aim in mind: to enhance architecture subtly and beautifully, giving the designers with whom we work the tools they need to create perfectly illuminated interior and exterior spaces.
2 3
Lumens per mtr
0 1000 2000 3000 4000 5000
3D LED Flex system 100
Modular, 3D flexible LED linear lighting system
The Radiant 3D LED Flex system has been developed for use in indirect architectural lighting projects including cove lighting and wall wash lighting applications where the building surfaces are non-linear with curved profiles and facades.
The Radiant 3D LED Flex system incorporates a patent pending articulated joint system joining the LED heat sinks that allows the system to follow curved building surfaces while maintaining a 25 mm spacing between LEDs, thus ensuring continuous lit effects without shadows or dark areas.
Each LED heat sink module can operate up to 9 Watts of LEDs giving a light output of up to 5,000 lumens per mtr.
Integrated DC to DC constant current driversallow long runs from asingle power supply.
Baku Cultural Centre auditorium lightingArchitect Zaha Hadid AssociatesLighting design MBLD
2012 Burberry store, Regent's Street, London2011 Heydar Aliyev Cultural Centre, Baku
4 5
The system can bend and twist in three dimensions to follow any building contours 4 x 2.4 Watt LEDs no lenses per module
2 x 4.7 Watt LED arrays with reflectors per module
Adjustable mounting bracket
Fixed mounting bracket
Power feedConnector
3D LED Flex system 100
Modular, 3D flexible LED linear lighting system
1 x 8.5 Watt LED array with reflector per module1 x 8 Watt RGBW LED array with colour mixing lens
76
1190
98
37
97
80
85
94
670 Rad
450 Rad
350 Rad
Mounting bracket &spring clip
3D LED Flex system 100
Modular, 3D flexible LED linear lighting system
8 9
2525
40
40
32
100
52
60
R 800
R 210
R 230
Segment Length - 100mm
Min. bend radii:Concave - 800mmConvex - 210mmLateral - 230mm
Lumens per mtr
0 1000 2000 3000 4000 5000
3D LED Flex system 40
Modular, 3D flexible LED linear lighting system
The Radiant 3D LED Flex 40 system incorporates all the design features of the 100 system but in a smaller width.
The system can be run at up to 50 Watts per mtr and provides up to 3,500 lumens per mtr depending on LED colour temperature and type.
The system includes both interior IP 20 and exterior IP 65 versions as well as a variety of LED, lens and reflector options.
The IP 65 version for exterior use is shown later in this brochure.
Interior no lens module with moulded cover Lens module with cover
Lens module mounted on adjustable aiming bracketExtruded modules
10 11
100
33
25
2525
30
R 220
R 305R 210
Segment Length - 100mmMin. bend radii:Concave - 220mmConvex - 210mmLateral - 305mm
43
46
Lumens per mtr
0 1000 2000 3000 4000 5000
3D LED Flex system 25
Modular, 3D flexible LED linear lighting system
The Radiant 3D LED Flex 25 system incorporates many of the design features of the 100 and 40 systems but with a smaller width of only 25 mm.
The system is ideal for use in smaller architectural, retail and residential lighting applications.
For straight coves a matching extruded profile is available, which connects to the articulated modules without dark areas, allowing both straight and curved runs to be lit from a continuous system.
The system can be run at 25 Watts per mtr and provides up to 2,000 lumens per mtr depending on LED colour temperature and type.
No lens module Elliptical lens module with cast cover
Extruded version without lenses No lenses, clear moulded cover, cable connection
1312
Lumens per mtr
0 1000 2000 3000 4000 5000
The Radiant Power Cove linear LED system is designed for use in a variety of interior architectural and retail applications including indirect, cove and cabinet lighting.
It combines the long-life advantages of LED lighting with the ability to fit any space providing the effect of a bespoke installation whilstoffering the convenience of an ‘off-the-shelf’ system.
The LED modules are attached to 4 conductor tracks that provide both power and data channels for dimming or colour change control andalso give additional heat sinking for the LEDs.
Power Cove
Each 4 Watt LED module incorporates an LV constant current driver with PWM dimming for white LEDs or a DMX controller / driver for RGBW versions.
The tracks are available in straight, bendable and flexible versions and can be hand bent on site to provide continuous LED lighting that follows building profiles and architectural details.
Sections of track can be joined with an illuminated in-line connector with matching LEDs.
This enables the system to provide continuous lighting, without dark areas, up to a maximum length of 15 mtrs between feed points.
40 Watts per mtr will give up to 2,500 lumens depending on LED colour temperature and optics.
Gatwick south terminal, lighting design by Morgan Sindall Professional Services, winner of two Lighting Design Awards March 2013
Playout monitoring centre, lightingdesign by Design Originals
Power Cove Modular, flexible LED linear lighting system
14 15
Power Cove
RGBW LEDs with DMX controller in each module
Straight 4 conductor track 4 LED module fitted with elliptical lenses
Flexible 4 conductor track Bendable track for concave bends with wider spacing
Bendable 4 conductor trackMounting clip for all tracks
Straight track with auto locking adjustable bracketIlluminated connector joins the tracks - no dark areas
Modules can be changed with a single screw fixing
Centre power feed and connector - no dark areasDimming and non dimming end power feeds
Church of Latter Day Saints London
16 17
Elliptical Y Medium WideElliptical X
Minimum bend radiusR 305
R 305
Bendable track - ConvexMin rad 585mmStandard track lengths24 modules - 2400mm12 modules - 1200mm6 modules - 600mm
Bendable track - ConcaveMin rad 625mmStandard track lengths24 modules - 2400mm12 modules - 1200mm6 modules - 600mm
2400
Nominal 2400 length, 24 Segments
Nominal 1200 length, 12 Segments41 1200
Segment 100
Nominal 600 length, 6 Segments41 600
Segment 100
41
41
41
41Segment 100
Illuminated in-line connector powerfeed
Bendable track
Standard track lengths24 modules - 2400mm12 modules - 1200mm6 modules - 600mm
Flexible track
38
44
28
Adjustable bracket
0 - 20 Degrees
Elliptical Y Medium WideElliptical X
Elliptical X Elliptical Y NarrowMediumWide
Power Cove
Modular, flexible LED linear lighting system
18 19
Flaplight with flaps open
Lumens per mtr
0 1000 2000 3000 4000 5000
Flaplight System
The Radiant LED Flaplight system incorporates lockable, hinged barn door flaps to control glare and cut-off.
The system has been developed for a wide variety of linear display lighting applications including museums, galleries and retail.
The lighting head can be fitted with a variety of lenses to control the beam angle and the flaps and body can be locked at the correct aiming angle.
Integral LV constantcurrent driversare dimmablewith allsystems.
Pendant version with flaps openFlaplight with flaps closed
20 21
Head rotates
End view detail
Variable length
35mm
General arrangement
65mm
Variable length
Isometric view
Adjustable flapsEnd view detail Detail flaps open
Flaps are locked independently with an Allen key
Flaplight System
Pendant versionPicture light
Double desk-lightPicture light
22 23
Shard integral driver 13 x 1.2 W Nichia NS3 LEDs per mtr Shard 30 integral driver 9 mm pitch x 0.15 W Nichia LEDs per mtr
Front
120° Beam angle
23°
44
19
75mm
Fitting can be cut on site every 150mm
Front
Left Feed(As mounted under shelf)
Right FeedBack Feed
LED Pitch
Lumens per mtr
0 1000 2000 3000 4000 5000
1 Watt Nichia LEDs on 75 mm pitch (constant across modules) Integral LV constant current drivers
Shard undercabinet
Linear lighting system
The Shard linear lighting systemhas been developed for use inthe apartments of the iconic Shard building in London.
The system incorporates1 Watt Nichia LEDs and a wide variety of colourtemperatures are available with a CRI of up to 95.
A linear prismatic controllergives a wide distribution for use in a wide variety of undercabinet and furniture lighting applications.
LV constant current drivers within the extruded section run the LEDs and all dimming systems can be used via the appropriate Radiant interface modules.
The system can be madein any length up to 2.4 mtrsbased on a module of 75 mm.
The extruded section can be cut to length on site to a module of 150 mm.
The system runs at up to 14 Watts per mtr and provides up to 1,500lumens per mtr depending on LED colour temperature.
24 25
Euclid 20 and 40 Modular LED linear lighting system
The Radiant Euclid system has been developed for use in wide variety of linear indirect architectural lighting projects including cove lighting, wall grazing, wall washing as well as local task and under cabinet lighting applications
The system is available in two sizes that both incorporate DC to DC constant current drivers to ensure efficient LED operation and so that long lengths of the system can be run from a single large power supply thus reducing wiring and installation costs.
The Euclid 40 system can provide up to 3,500 lumens per mtr with 2,700 K 80 CRI LEDs and the Euclid 20 can provide up to 1,500 lumens per mtr with 2,700 K 80 CRI LEDs
The innovative end cap design allows either end, side or back power entry. Side and back power feeds allow continuous lighting without dark areas on long runs and the LED pitch is maintained between the individual luminaires to maintain constant lighting levels.
Radiant can supply these systems in custom lengths based on a 100 mm module.
Lumens per mtr
0 1000 2000 3000 4000 5000
40
32
21
21
Euclid 20 side feedEuclid 40 side feed
Euclid 40 end feed Euclid 20 end feed
Euclid 40 continuous LED pitch Euclid 20 continuous LED pitchSpring clip
Lumens per mtr
0 1000 2000 3000 4000 5000
Euclid 20Euclid 40
Euclid 20Euclid 40
26 27
Ribbed LED spotlight track mounted
Cone LED spotlight surface mounted
Lumens per spotlight
0 100 200 300 400 500
Cone LED spotlight track mounted
Ribbed LED spotlight surface mounted
60mm narrow beam LED spotlight track mountedMR16 LED spotlight track mounted
60mm narrow beam LED spotlight surface mountedMR11 LED spotlight track mounted
Micro Track system
The Radiant LED Micro-Track is one of the smallest section low voltage track systems available and is designed for use in retail display cabinets, museums and residential lighting applications.
With a working life of 50,000 hours, the Radiant LED spotlights eliminate the cost and security issues of replacing halogen lamps. The light output from the 3.5 Watt LED arrays used for Radiant LED spotlights contains very little heat or UV so this system is ideal for the illumination of sensitive materials.
28 29
41
89
53
12.725
74
48
70
14
61.5
In line connectorEnd cap and fixing clips with black and chrome track
Various lenses and honeycomb louvreSurface mount track base
Curved Micro Track used in Banana Republic Milan Curved Micro Track used in Banana Republic Milan
Power feed and flexible connector Curved track
Micro Track system
30 31
85
140
85
173
Surface mount version of 25 Watt Aleta LED spotlight Surface mount version of 15 Watt Aleta LED spotlight
Lumens per spotlight
0 1000 2000 3000 4000 5000
Lumens per spotlight
0 1000 2000 3000 4000 5000
3 circuit track version of 25 Watt Aleta LED spotlight3 circuit track version of 15 Watt Aleta LED spotlight
3 circuit track version of 15 Watt Aleta LED spotlight 3 circuit track version of 25 Watt Aleta LED spotlight
Aleta LED Interior spotlight range
The Radiant Aleta range of LED spotlights are designed for use in a variety of museum, gallery and retail lighting applications. A wide variety of LED array types, reflectors, lenses, control accessories and dimming systems can be used in this range of spotlights. Any RAL colour can be supplied to order.
32 33
Serpentine
Flexible IP 65 LED Linear lighting system
TFL project Architect Burns and NiceRIBA award winner 2010
34 35
The Radiant Serpentine exterior LED linear system is the first system of its type to be hand bendable on site, and to offer adjustment in both the axial and vertical planes.
The Serpentine system is designed to be used in a wide variety of exterior building facade lighting,wall-grazing, landscape and other exterior architectural lighting applications.
The individual LED lighting modules can rotate around the axis of the system and between the joints allowing the system to be curved to follow building profiles and architectural details and for the light output to be aimed to give optimum grazing or feature lighting.
Up to 75 Watts per mtr. Over 5,500 lumens per mtr depending on LED colour temperature.
Lumens per mtr
0 1000 2000 3000 4000 5000
Serpentine Flexible IP 65 LED Linear lighting system
Serpentine Flexible IP 65 LED Linear lighting system
4 Watt Citizen white LED arrays with reflectors Glass windows for high sunlight applications
Cree RGBW MCE LED arrays with colour mixing lensesGlass windows for high sunlight applications
Flexible connector for complex curved applicationsLocking in horizontal plane with Allen keyLocking in vertical plane with Allen key
36 37
Angle variesdepending onbase radius
All joints are rotationally adjustableon vertical and horizontal planes.
R 280
R 635
Minimum allowable radii arrangementInward 0˚
Minimum allowable radii arrangementInward 15˚
50
49
91
101
200 200Centre to centre mounting holes Min. module segment 25
200
1600 25
8 SegmentsNominal 1600mm length
81
50
49
91
Single colour LED RGBW LED
Serpentine
Flexible IP 65 LED Linear lighting system
38 39
Module Length: 100mmMinimum Bend Radii:Concave - 400mmConvex - 210mmLateral - 230mm
End View
100
4825 25
55
68 IP65 Connector
End ViewSide View
R220 R400
R230
40
50
41
IP65 Plug and Socket
40
58
72
Plan View
End ViewSide View
41
67
Lumens per mtr
0 1000 2000 3000 4000 5000
3D LED Flex system 40 IP 65 versionModular, 3D flexible LED linear lighting system
The Radiant 3D LED Flex 40 system, IP 65 version, can be run at 55 Watts per mtr and provides up to 3,000 lumens per mtr depending on LED colour temperature and type.
The IP 65 system is available in a wide variety of LED, lens and reflector options and can besupplied with tempered UV block glass covers for use in high sunlight situations.
40 41
Multi LED versionDouble ended T5 fluorescent versions
Single ended PLL fluorescent version pendant LED RGB or RGBW clear version
7060
LENGTH VARIABLE
11796
SIDE VIEW
21PLAN VIEW
40
END VIEW
7060
T5 14 Watt: 577mm. 21 Watt: 877mm. 28 Watt: 1177mm. 35 Watt: 1477mm.
11796
PLAN VIEW
SIDE VIEW END VIEW
40 21
Tube LightLinear lighting tube system IP65
The Radiant Tube Light system has been developed for use in a wide variety of interior and exterior lighting applications where an enclosed linear line of light is required.
The system is available for both fluorescent T5 and PLC lamps in a range of Wattages and also in LED versions including RGBW. An E27 base version is suitable for use with low wattage decorative incandescent lamps - below 20 Watts - as well as self ballasted CFL lamps below 11 Watts.
Line voltage ballasts and LED drivers are located within the luminaire, situated behind the reflector. Remote driver versions are also available for PLL lamps and double sided LED arrays.
The outer extruded UV resistant polycarbonate tube is available in both clear and frosted finishes. Colour gels can be supplied to fit with the fluorescent lamps for decorative applications.
A surface mount bracketis available as well as a pendant suspension kit and custom mounting brackets.
The surface mounting brackets allow limited rotation around the major axis to allowwall grazing and washing effects to be achieved.
Lumens per mtr
0 1000 2000 3000 4000 5000
42 43
45 Watt 16 LED RAD 250 IP 68 uplight
25 Watt single LED array RAD 150 IP 68 uplight 16 LED RGBW RAD 250 IP 68 uplight
Regent’s Place detail4 x 10 Watt RGBW uplight with colour mixing lenses
Lumens per uplight
0 1000 2000 3000 4000 5000
RAD 250 IP 68
Buried uplights
Regent’s Place, London, 2010 RIBA London Award, Lighting Design by Maurice Brill, Architects Carmody Groark
44 45
Lumens per uplight
0 1000 2000 3000 4000 5000
245
245
108
105
245
245
300
300
350
RAD 250 submersible to 3 mtrs
RAD 250 submersible with niche
RAD 250 IP 68Submersible LED uplights
The Radiant range of square and rectangular IP 68 rated LED buried uplights are designed for use in a wide variety of exterior architectural lighting applications.
The RAD 250 luminaire is based on the custom uplight designed in collaboration with MBLD and produced for the British Land project Osnaburgh Street Pavilion - Regent’s Place.
The uplights are sealed to an IP 68 rating to ensure long working life in applications where they may be submerged for extended periods of time. The submersible version was developed for the spa pool at the Armani Hotel in Milan and has the same optical performance but is constructed from brass and stainless steel.
46 47
RAD Cube RGBW wall light
The RAD Cube IP 65 architectural wall light incorporates a single RGBW LED array and DMX driver controller.
The colour mixing lens works with the RGBW LED array to create a well blended colour output even with a small offset distance from the wall.
The LED and lens are angled at 15 degrees to push more light onto the mounting surface.
The RAD Cube can also be produced with a dynamic white LED array and DMX control.
The luminaires can be linked together in a chain with 5 core exterior grade cable and IP 68 connectors for easy wiring.
7 Watts producing approx 500 lumens depending on LED configuration.
RAD Cube 75
RAD Cube 95
48 49
Aleta LED Exterior projectorIP 65 range
The Aleta LED IP 65 LED projector range is available in 25 Watt and 50 Watt sizes.
A single white or RGBW LED array is fitted with a variety of reflector and control options.
Dimmable line voltage drivers are housed in the base.
Aleta 25 Watt IP 65 projector Aleta 50 Watt IP 65 projector
Lumens per spotlight
0 1000 2000 3000 4000 5000
Lumens per spotlight
0 1000 2000 3000 4000 5000
50 51
Products and literature designed by
Radiant Architectural Lighting Limited10 Broadbent Close 20 - 22 Highgate High Street London N6 5JW ENGLAND UK
TEL + 44 ( 0 ) 20 8348 9003FAX + 44 ( 0 ) 20 8348 6478
E MAIL [email protected]
WEB www.radiantlights.co.uk
Copyright © April 2013 David Morgan Associates