FSE Single Page1
-
Upload
santhosh-lingappa -
Category
Documents
-
view
233 -
download
5
Transcript of FSE Single Page1
-
8/3/2019 FSE Single Page1
1/7
Next Generation
TRAINING SIMULATION
3D PACTand3D PROCESS VISUALISATION
Next Generation
TRAINING SIMULATION
FSEAdvanced Simulation Software Suite
-
8/3/2019 FSE Single Page1
2/7
FSEAdvanced Simulation Software Suite
FSE is an Advanced Simulation Software Suite that was
developed by M-Tech Industrial (Pty) Ltd, together with Samahnzi
through the Innovation Fund, a business unit of the Department
of Science and Technology of South Africa.
FSE is a powerful, integrated software platform which enables
engineers to develop High Fidelity, Full-scope Power and
Process plant Simulators quicker than ever before. It sports a
modern, intuitive graphical user-interface which makes it exciting
to develop, analyze and train on.
FSE sports a totally open, customizable architecture.
The following high delity, congurable solvers and libraries are
by default included in FSE:
Multi-Phase Flow with Incondensable Gases
Consists of more than 50 high-delity, congurable thermal-uid
simulation components including basic and advanced Pipes,
Valves, Tanks, Turbines, Pumps, Compressors, Fans, Reactors,
Heat Exchangers and complex Heat Transfer components.
Using any Microsoft .NET capable programming language,
engineers can easily develop and integrate their own solvers,
libraries, schedulers or even conrol all simulator functionality
from an external application.
The power of FSE comes from embracing the latest software
technologies and engineering strategies. This not only enables
quicker development of Full-scope Plant Simulators, but also
delivers higher accuracy, which truly allows engineering analysis
and operator training on the same simulation platform, at no
extra cost.
FSE includes full instructor and trainee assessment functionality,
allowing Power and Process Plant Instructors to develop
complex scenarios to train and evaluate learners.
-
8/3/2019 FSE Single Page1
3/7
Electrical Networks:
Includes all components necessary to simulate a complete electrical network for a Full-scope Plant Simulator, such as basic and advanced
models for Motors, Generator, Exciters, Buses, Breakers, Isolators, Resistive Loads, Innite Grid etc.
Distributed Control Systems
FSE contains a comprehensive DCS library capable of simulating an entire Power/Process Plants Control System (including Boiler,
Turbine and Generator Control and Protection) according to a prescribed control philosophy.
-
8/3/2019 FSE Single Page1
4/7
Human System Interface:
FSE contains all necessary functions and components to replicate or connect to a 3rd party HMI/SCADA. This includes connecting to
an Emulator or actual HMI System supplied by the Control System OEM (e.g. Siemens, ABB, Emerson, GE, etc.). The Simulator HMI will
therefore accurately reect the look-and-feel of the actual Plant Control Interface.
Mechanical:
Includes Shafts, Thrust and Journal Bearings, Barring Gear, Heat Leaks, Expander Components, etc.
-
8/3/2019 FSE Single Page1
5/7
Furnace:
Used to simulate Drum Boilers, Once-through/Benson Boilers (Sub- and Supercritical), Circulating Fluidised Bed Boilers, including
components like Combustion/Fire, Gas Burners, Oil Burners, Coal Burners, Pyrometers etc.
Mill/Pulveriser:
Includes Vertical Spindle and Tubular Ball Type Mill models, as well as the capability to add custom Mill models.
-
8/3/2019 FSE Single Page1
6/7
Actuators:
Includes analog and digital Motorized, Fluid, Solenoid,
various I to P, Manual etc.
Transmitters:
Includes more than 20 types of Switch and Transmitter
Models for pressure, temperature, speed, level, ow, voltage,
current etc.
Nuclear:
Includes models for Pressurized Water Reactor, High
Temperature Gas-cooled Reactor, etc.
Recent Full Scope High Fidelity Training Simulators
developed on FSE:
Matla Power Station Operator Training Simulator:
Unit Type: Drum Boiler - 600MW electrical
output Common Plant and
Electrical Operating Desk
Unit/BOP Controls: ABB Melody and 800xA -
Emulated
Turbine Controls: Mauell - Simulated
Contact Person: Pieter Bresler (ABB)
+27 82 773 4385
Attala Power Station Operator Training Simulator:
Unit Type: 2-on-1 Combined Cycle Plant
500MW electrical output
Unit/BOP Controls: Emerson Delta V - Emulated
Turbine Controls: GE Mark VI - Emulated
Contact Person: Gary Herrin (Entergy)
+1 501 454 4369
Wygen 3 Power Station Operator Training Simulator:
Unit Type: Drum Boiler Unit 100MW
electrical output
Unit/BOP Controls: ABB Harmony/Process Portal B
- Emulated
Turbine Controls: Siemens PCS 7 - Simulated
Contact Person: Mark Gregg (Simgenics)
+1 817 909 2267
Gilbert 3 Spurlock Power Station Operator Training
Simulator:
Unit Type: Circulating Fluidised Bed Boiler
Unit 300MW electrical output
Unit/BOP Controls: ABB In 90/800xA - Simulated
Turbine Controls: GE Mark VI - Emulated
Contact Person: Nick Pitakis (Spurlock)
+1 606 883 3165
-
8/3/2019 FSE Single Page1
7/7
South Africa
Samahnzi (Pty) Ltd.
Block I, Techno Link, 63 Regency Drive
Route 21 Corporate Park
Irene, Pretoria
South Africa
Tel: +27 (0) 12 345 5702/3
Fax: +27 (0) 12 345 5704
e-mail:[email protected]
www.samahnzi.co.za
Australia
FlowSim (Pty) Ltd.
10 Tenterfeld Drive
Narre Warren South, VIC 3804
Tel: +61 (0) 3 8790 1087
Fax: +61 (0) 3 9445 9221
e-mail: [email protected]
www.fowsim.com.au
United States
SimGenics Corporation
2059 Spur Cross Road
Grand Junction, CO 81507
Tel: +1 (817) 473 9191
Fax: +1 (817) 736 0427
e-mail: [email protected]
www.simgenics.com
South Africa
M-Tech Industrial (Pty) Ltd.
Block E & F, 24 Totius Str
Potchefstroom
South AfricaTel: +27 (0) 18 297 0326/7
Fax: +27 (0) 18 297 0318
e-mail: [email protected]
www.mtechindustrial.com
Partnerships