FS and FD Cast Device Boxes: Single Gang; Malleable Iron ......B-2 FS and FD Cast Device Boxes:...
4
FS and FD Cast Device Boxes: Single Gang; Malleable Iron, Aluminum UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. FS Box 2.00" Deep, FD Box 2.69" Deep. Type Depth Hub Catalog Number Size Malleable Iron Aluminum (Inches) Ridge Top Ridge Top FS FD Shallow Deep 1/2 3/4 1 1/2 3/4 1 FS-1-50 FS-1-75 FS-1-100 FD-1-50 FD-1-75 FD-1-100 FS-1-50-A FS-1-75-A FS-1-100-A FD-1-50-A FD-1-75-A FD-1-100-A FSC FDC Shallow Deep 1/2 3/4 1 1/2 3/4 1 FSC-1-50 FSC-1-75 FSC-1-100 FDC-1-50 FDC-1-75 FDC-1-100 FSC-1-50-A FSC-1-75-A FSC-1-100-A FDC-1-50-A FDC-1-75-A FDC-1-100-A FSS FDS Shallow Deep 1/2 3/4 1/2 3/4 1 FSS-1-50 FSS-1-75 FDS-1-50 FDS-1-75 FDS-1-100 FSS-1-50-A FSS-1-75-A FDS-1-50-A FDS-1-75-A FDS-1-100-A FSLA Shallow 1/2 FSLA-1-50 Effective October, 1993 Copyright 1993 Printed in U.S.A. Appleton • • ELECTRIC COMPANY 1701 West Wellington Avenue Chicago, Illinois 60657 PAGE 3
Transcript of FS and FD Cast Device Boxes: Single Gang; Malleable Iron ......B-2 FS and FD Cast Device Boxes:...
FS and FD Cast Device Boxes:Single Gang; Malleable Iron, AluminumUNILETS® for Use with Threaded Rigid Metal Conduit and IMC.FS Box 2.00" Deep, FD Box 2.69" Deep.
Type Depth
Hub Catalog NumberSize Malleable Iron Aluminum(Inches) Ridge Top Ridge Top
FS
FD
Shallow
Deep
1/23/41
1/23/41
FS-1-50FS-1-75FS-1-100
FD-1-50FD-1-75FD-1-100
FS-1-50-AFS-1-75-AFS-1-100-A
FD-1-50-AFD-1-75-AFD-1-100-A
FSC
FDC
Shallow
Deep
1/23/41
1/23/41
FSC-1-50FSC-1-75FSC-1-100
FDC-1-50FDC-1-75FDC-1-100
FSC-1-50-AFSC-1-75-AFSC-1-100-A
FDC-1-50-AFDC-1-75-AFDC-1-100-A
FSS
FDS
Shallow
Deep
1/23/4
1/23/41
FSS-1-50FSS-1-75
FDS-1-50FDS-1-75FDS-1-100
FSS-1-50-AFSS-1-75-A
FDS-1-50-AFDS-1-75-AFDS-1-100-A
FSLA Shallow 1/2 FSLA-1-50
Effective October, 1993Copyright 1993 Printed in U.S.A. Appleton
• • ELECTRIC COMPANY
1701 West Wellington AvenueChicago, Illinois 60657
PAGE 3
B-2FS and FD Cast Device Boxes:Malleable Iron, AluminumUNILETS® for Use with Threaded Rigid Conduit and IMC.All Device Boxes have Ridge Top Construction.
D
Applications• Accommodate wiring devices such asswitches and receptacles.• Provide excellent service in areaswhere boxes are subject to rough usage.• Serve as pull boxes for conductors.• Permit access to conductors for main-tenance.• Provide openings for making splices.• Allow connections for branch conduitruns.• FS and FD blank bodies—for specialconduit-entrance arrangements.Features: All FS and FD Boxes• Corrosion-resistant—ideal for indoorand outdoor installations.• Weatherproof, raintight and dust-tightwhen used with cast gasketed covers.• FS and FD boxes take standard flushwiring devices.• FD boxes take devices exceeding1-5/8" in depth under fastening ears.• Malleable iron for high tensile strengthand ductility—provides greater resist-ance to impact and shock.• Both malleable iron and aluminumboxes have ridge top construction forpositive cover/gasket/box fit.• Accurately tapped, tapered threadsfor tight, rigid joints, ground continuity.• Complete selection of covers, recep-tacles, plugs, gaskets and accessories.• Covers have captive stainless steelscrews to speed installation, prevent"freezing" of screws.Features: Cast Hub BoxesO Available in single, two and threegang and tandem.• Smooth, rounded integral bushing ineach hub protects conductor insulation.Features: FOB Blank Bodiesfor Drilling and Tapping0 Available in single, two and threegang boxes.• Drilling and tapping from 1/2" thru1-1/2".• Minimum engagement of 3-1/2 threads.• With mounting lugs.• FDB-2GL and FDB-3GL can also bedrilled and tapped in back of box (wallopposite cover).
© Blank Bodies for Drillingand Tapping. FDB-3L shown
O Cast-Hub Boxes.Single Gang shown. © Blank Bodies for Brazed Hubs.
FS-2G shown.
Features: FS & FD BlankBodies for Brazed Hubs0 Available in single, two, three and fourgang boxes.• Brazed threaded hubs for threadedconduit from 1/2" thru 1-1/2" and brazedunion hubs from 1/2" thru 1-1/4".• Smooth, rounded integral bushing ineach hub protects conductor insulation.Standard Materials• Casf Hub Device Boxes and Boxesfor Drilling and Tapping: malleable ironor copper-free (4/10 of 1% max.) alu-minum.• Brazed Hubs: malleable iron.• Covers/malleable iron, steel, or cop-per-free (4/10 of 1% max.) aluminum.Standard Finishes• Malleable Iron Device Boxes: triple-coat—(1) zinc electroplate, (2) dichro-mate, and (3) aluminum polymer en-amel.• Aluminum Device Boxes: epoxypowder coat.
• Malleable Iron Covers with Gaskets:triple-coat—(1) zinc electroplate, (2)dichromate, and (3) epoxy powder coat• Steel Covers: zinc electroplate.• Aluminum Covers: epoxy powder coatCompliances• UL Standard: 498 and 514.• U.S. Federal Specification W-C-586B• Appleton malleable iron productsconform to ASTM A47-77, Grade32510, which has the following prop-erties: tensile strength, 50,000 psi;yield, 32,000 psi; and elongation, 10%.• Appleton aluminum products areproduced from a high strength copper-free (4/10 of 1% max.) alloy.Reference Data• When ordering drilled and tappedopenings or brazed hubs for blankbodies, refer to "Ordering Information"pages.
Gasket is designed so that it "wraps around"ridge top of Appleton aluminum or malleableiron device box. Result is a positive sealagainst moisture.
Shows gasket construction. Cover tightenson largest perimeter of gasket and fits snuglyagainst portion of gasket that wraps aroun'dridge top of box.
Effective October, 1993Copyright 1993 Printed in U.S.A.PAGE 2
1701 West Wellington AvenueChicago, Illinois 60657
Dimensions: FS and FDCast Device Boxes; Malleable Iron andAluminum,* Single Gang and Tandem,
^2
FS and FD Single Gang Boxes without lugs.Dimensions in Inches and Centimeters.
FS and FD Single Gang Boxes with lugs.Dimensions in Inches and Centimeters
yn)
i.2(82.6
——
5"rim
I
, 1 .88" __ i(4.8cm)
r , ' - - . ' , ?\$-h-e-; ; • <
.—.^
^ '.': ; J
-ti^2.19" __ .
(5.6cm) "'• —— 2.81" ——— •
1
12.81"(7.1cm)
—— 1 1 />1 .69"(4.3cm)
_J
^ ———— '6—32 T
FS Tandem Boxes.Dimensions in Inches and Centimeters
10.9'(27.8(
t";m)
Q 1 Q
& 16" , ..,(4,mm, p|
-f— "1
I11 r-r 1
(23.-»-ml '
I 1! '-,i i
iiii
k i- —<-\—'U 1 .78" — I
(4.5cm)_2.0" „
4.25"(10.8C11)
9.44"(24.0cm)
4.25"(10.8Cm)
(5.1cm)
? —— ° —— it
° o & ~v* ———————— J
rf —————— O 0
•c ° ri iv s1 .88"
r~(4.8cm)^2.16"
' (5.5cm) '__2.81" __
- \3.28"(83.3mm)
3.25"(82.6mm)
2 94"(7.5cm)
-\6—1?
32 Thrd.Holes
(7.1cm)
All cover and device screws 6—32 thread.
3.28"(83.3
5/,e' Dia.\
^
3.25"(82.6m
nm)
m)
1.13")* (2.9cm)
r8-!i\fJ x|
5" (
L1.8
"•1
r*
538" J
(4.8cm) '„ 2.81"
(7.1cm)— 2.19" ——
5.38"(13.7cm)
^J
6
f
2.81"(7-\cm)
_L
-32 T•1.13"
K
irri
. (2.9cm)
(5.6cm)
.25"—j |—(6.4mm)
(7.4cm)
HubSize (In.) A B C
D"FS" "FD"
Dimensions in
1/2
3/41
5.88
5.88
6.31
1.13
1.38
1.69
.63
.75
.94
2.00
2.00
2.00
Dimensions
1/2
3/4
1
14.9
14.9
16.0
2.9
3.5
4.3
1.6
1.9
2.4
5.1
5.1
5.1
2.69
2.69
2.69
E
Inches
1.50
2.06
2.06
F
3.50
3.50
3.50
«
1
11
FS"
.78
.78
.78
G"FD"
2.44
2.44
2.44
H
1.69
1.50
1.38
in Centimeters
6.8
6.8
6.8
3.8
5.2
5.2
8.5
8.5
8.5
4
4
.5
.5
4.5
6.2
6.2
6.2
4.3
3.8
3.5
"Aluminum FS boxes have same dimensions as malleable iron FS boxes.
Fraction/Decimal Equivalents (Inches)Fraction Decimal1/16 0.061/8 0.133/16 0.191/4 0.25
Fraction Decimal5/16 0.313/8 0,387/16 0.441/2 0.50
Fraction Decimal9/16 0.565/8 0.6311/16 0.693/4 0.75
Fraction Decimal13/16 0.817/8 0.8815/16 0.941 1.00
BRefer to Pricing Index for price,weight, and standard package
PAGE 6, Effective June 1983
1701 W.Wellington Ave.Chicago, Illinois 60657
Copyright 1983 Printed in U.S.A.
tt-24 Wiring Capacity: FS and FD CastDevice Boxes; Cubic Inchesand Cubic Centimeters.Cast Hub Boxes and Blank Bodies.
FS and FD Boxes with Cast Hubs: All Types
Capacity in Cubic InchesHubSizeInches
1/2
^^^SSJS^^^^ ffS1^^ O/T1
Single Gang
FS FD
18.0 25.0
18.0 25.0
18.0 25.0
Two Gang
FS FD
32.0
32.0
32.0
45.0
45.0
45.0
i ; Capacity in Cubic Centimeters%., •: ,,"?!i;.;,> * • •> • . . . . . : .-.:„.- ... :' -| *p
Single Gang 3/4295.0 409.7295.0 409.7295.0 409.7
524.4524.4524.4
737.4737.4737.4
Three Gang
FS FD
46.0
46.0
46.0
62.0
62.0
62.0
753.8753.8753.8
1016.01016.01016.0
Two GangTandemFS40.0
40.0
40.0
655.5655.5655.5
ifiii '-ii sitiiii
Two Gang Tandem
FD-4L
FDB-2L
FDB-3GL
Discount Schedule UDRefer to Pricing Index for price,weight, and standard package
PAGE 24, Effective 1979
FS and FD Blank Bodies for Brazed Hubs (FDH Series)
Capacity
Gangs
SingleTwoTwoThreeThreeFourFour
Capacity
SingleTwoTwoThreeThreeFourFour
in Cubic InchesFSCat. No.FS-1GLFS-2GFS-2GLFS-3GFS-3GLFS-4GFS-4GL
Cu. In.Vol.18.032.032.046.046.058.058.0
FDCat. No.FD-1LFD-2G, FD-2GLFD-2LFD-3G, FD-3GLFD-3LFD-4G, FD-4GLFD-4L
Cu. In.Vol.26.045.065.062.098.078.0
130.0in Cubic Centimeters
FS-1GLFS-2GFS-2GLFS-3GFS-3GLFS-4GFS-4GL
FOB Bodies for Drilling
Gangs
SingleTwoThreeTwoThree
Capacity in
Cat. No.FDB-1LFDB-2LFDB-3LFDB-2GLFDB-3GL
295.0524.4524.4753.8753.8950.4950.4
FD-1LFD-2G, FD-2GLFD-2LFD-3G, FD-3GLFD-3LFD-4G, FD-4GLFD-4L
and Tapping
Cubic InchesCu. In.Vol.26.065.098.045.062.0
Capacity in Cubic
Cat. No.FDB-1LFDB-2LFDB-3LFDB-2GLFDB-3GL
426.1737.4
1065.21016.01605.91278.22130.3
CentimetersCu. cm.Vol.
421.11065.21605.9737.4
1016.0
FS Single Gang Extension FS Two Gang Extension
FS-1EXT Cat. No.
FS-1EXT
VolumeCu. In.10.8
VolumeCu. cm.177.0
Cat. No.
FS-2EXT
VolumeCu. In.
18.0
VolumeCu. cm.295.0
1701 W.Wellington Ave.Chicago, Illinois 60657
Copyright 1979 Printed in U.S.A.
![Section 2 Galvanised Malleable Iron Pipe Fittings · 29 GALVANISED MALLEABLE IRON PIPE FITTINGS [2] Galvanised Malleable Hexagon Bush Galvanised Malleable Hexagon Bush AAP CODE](https://static.fdocuments.net/doc/165x107/5b96177509d3f2ea5c8cd0dc/section-2-galvanised-malleable-iron-pipe-fittings-29-galvanised-malleable-iron.jpg)
