FROM TO 2000 KGscantruck.dk/Admin/Public/Download.aspx?file=Files/Filer...MANITOU near you With a...
Transcript of FROM TO 2000 KGscantruck.dk/Admin/Public/Download.aspx?file=Files/Filer...MANITOU near you With a...
3-wheel electric
A CHOICE OF
4 MODELS
3-WHEEL
ELECTRIC
MANITOU
SERVICES
FROM 1500 KG
TO 2000 KG
AC TECHNOLOGY
A COMPREHENSIVE
RANGE OF INDUSTRIAL
TRUCKS
3-wheel electric 1,5 T
> 4 models from 1.5 T to 2 TMANITOU offers you its new range of 3-wheel electric-powered trucks.
MANITOU’s know-how:a guarantee of satisfactionManitou, recognised as a world leader in materials handling, havealways been acknowledged for their inherent ergonomic design & driveability, these features have reached NEW heights in their latestrange of electric models which have been developed to satisfy the keyrequirements of driver comfort and productivity.
>
Reliability and PerformanceAC Technology - lower operating costs – increased efficiency.Operator instrument panel - Selection in excess of 30 performancesettings. Ensuring the optimum drive programme.Regenerative Braking.
>
Comprehensive standard equipment
Front/Rear Supercushion Tyres, high-capacity battery, Centralized Filling System, emergency stop, rubber floor
mat, working headlights and rear lights, adjustable steeringcolumn, interior rear-view mirror, reverse warning
signal, complete dashboard with hourmeter and diagnostic and set-up system, integral sideshift,
AC motors, duplex mast, 3.30m full visibility, load backrest...
Technical innovationTechnical innovation means substantial benefits, including lower operating costs & increased operatorproductivity.The Manitou ME 3 range has all these in abundance,performance, specification and features can all be selected exactly to the application requirements.
>
Operator comfort and safetyThe ME range of three wheel electric lift trucks is innovative, versatile & reliable, the controls are groupedaround the operator in familiar automotive position.
Adjustable steering column.Low step & hand grip ensure safe entry and exit to the driver’s cabin.Uncluttered floor area.Fully adjustable comfort seat.Clear view mast.
COMFORT,
RELIABILITY,
PRODUCTIVITY
1,6 T 1,8 T 2 T
>
> Compact and versatileThe Manitou ME 3 is a compact three wheel truck.
Turning in its own length is easy. Achieved through independently powered drive motors, the inside motor reverses during the turn to allow the truck to pivot at the centre of the front axle.Works in confined spaces. Operates in narrow aisles, prevents accidental damage to the truck, loads and racking.Twin steer tyres. The twin steer tyre design provides increased stability. The design reduces tyre wear, increases tyre life and helps reduce power consumption, also gives a bigger footprint and thus prevents damage to trailer / container floors.
Key features includeClear view mast available in two or three stage low or full free lift options, hydraulic cushioning provides smooth transition between main and free lift cylinders.An integral side shift for increased residual capacity as standard on the Manitou range of electric trucks.Front and rear lighting, including two front facing spot lights and direction indicators.
>
>
SAFETY AND
EFFECTIVENESS
Regenerativebraking
Regenerative braking is standardon all electric counter balance model.Automatic Electric Braking whenthe operator releases the acceleratorpedal.Automatic battery regenerationduring automatic brake mode.Reduced mechanical/disc brakewear - Reduced Maintenance/Operating Cost.Reduces operator fatigue.
Long life hydraulic systemThe hydraulic system protected by a highly efficient filtration system ensures top performance by protecting vital components, thus reducing maintenancecost.
>
> Simplified maintenanceAccess to all the electronic & hydraulic components is designed to be as easy as possible, minimising truck down time during routinemaintenance & servicing.Routine battery maintenance is simplified by using the central fillingsystem, ensuring quick, clean and efficient topping of all battery cells.
> Rugged performanceThe chassis is manufactured from heavy plate steel; the frame providesexceptional strength and maximum protection of internal components.
RELIABILITY
AND EASE OF
MAINTENANCE
THE MANITOU
NETWORK
AT YOUR
SERVICE
MANITOU near you
With a network of 500 service and parts centres in more than 100 countries,
MANITOU attaches the utmost importance to being near its customers.
>
Specialized technicians
at your service
With 2000 Manitou trained technicians in its distributor network throughout
the world, Manitou keeps close to its customers and guarantees
skilled and rapid service.
>
Parts Availability
All parts available from our European centralized stock and ordered by express
post are delivered the same day.
>
Warranties matching up to
your requirements
Our trucks are warranted for 1 year or 2000 working hours.
Parts and labour for: engine, gearbox, front axle, rear axle, mast, hydraulic components, except for wear parts.
>
MANITOU IndustryA comprehensive offering at your service>
MANILECA comprehensive
range of warehousing equipment
3-wheel and 4-wheel
electric-poweredrange
1.5T to 3T lift trucks
Engine powered
range1.5T to 7T lift trucks
The specifications contained herein shall not bind the manufacturer and are subject to change without notice.The equipment described in this brochure can be standard, optional or unavailable, depending on the versions. For more details, contact your MANITOU dealer.
700357EN
Cahier technique Technical book
Gamme / Range: ME
1,5 à 3 tonnes / 1,5 to 3 tons
Chariots électriques / Electric Trucks
1500 - 1600 kg
CARACTéRISTIQUES PRINCIPALES - TECHNICAL SPECS
Dés
ign
atio
nS
pec
ifica
tio
ns
1.1 Fabricant - Manufacturer MANITOU MANITOU
1.2 Modèle - Model ME315 ME316
1.3 Propulsion : batterie, diesel, essence, GPL, secteur - Power source : battery, diesel, gasoline, LPG, mains
BatterieBattery
BatterieBattery
1.4 Type de conduite : manuel, accompagnant, debout, assis - Driving position : manual, walking alongside, standing, seated
AssisSeated
AssisSeated
1.5 Capacité nominale / charge sur fourche (capacité de base) - Nominal capacity / load on forks Q t 1,5 1,6
1.6 Centre de gravité de la charge - Load - centre of gravity c mm 500 500
1.8 Distance de la face d’appui de la charge au centre de l’essieu avant(1) - Distance from the load-bearing surface to centre of front axle(1) x mm 355 355
1.9 Empattement - Wheelbase y mm 1250 1358
Po
ids
Wei
gh
ts
2.1 Poids du chariot en ordre de fonctionnement - Operating weight kg 3060 3110
2.2 Poids en charge sur essieu avant / arrière - Axle load, with load, front / rear kg 4060 / 500 4180 / 530
2.3 Poids sans charge sur essieu avant / arrière - Axle load, without load, front / rear kg 1450 / 1610 1470 / 1640
Ro
ues
, ch
assi
sTyr
es,
fram
e
3.1 Equipement de roues : bandage (V), PPS (SE), pneumatique gonflable (L) - Tyre equipment : bandage (V), superelastic (SE), pneumatic (L) PPS / SE PPS / SE
3.2 Dimensions roues avant - Size of front wheels “ ou mm 18 x 7 - 8 18 x 7 - 8
3.3 Dimensions roues arrières - Size of rear wheels “ ou mm 15 x 4,5 - 8 15 x 4,5 - 8
3.5 Nombre de roues avant (x = roue motrice) / roues arrières - Number of front wheels (x = drive wheel) / rear wheels 2x 2 2x 2
3.6 Voie (milieu des roues) avant - Front wheel gauge (middle of wheels) b10 mm 902 902
3.7 Voie (milieu des roues) arrière - Rear wheel gauge (middle of wheels) b11 mm 175 175
Dim
ensi
on
sD
imen
sio
ns
4.1 Inclinaison du mât en avant / arrière(2) - Tilt of mast forwards / backwards(2) α / β deg 6,5 / 6,5 6,5 / 6,5
4.2 Hauteur mât abaissé - Height mast lowered h1 mm 2145 2145
4.3 Levée libre - Free lift h2 mm 145 145
4.4 Hauteur de levée - Lift height h3 mm 3300 3300
4.5 Hauteur mât déployé (avec dosseret) - Height mast extended (with backrest) h4 mm 4245 4245
4.7 Hauteur du protège conducteur (cabine) - Height of overhead guard h6 mm 1998 1998
4.12 Hauteur d’attelage - Height of towing bar h10 mm 450 450
4.19 Longueur totale - Overall length l1 mm 2942 3050
4.20 Longueur jusqu’au talon des fourches - Length at fork heels l2 mm 1792 1900
4.21 Largeur totale (hors tout) - Total width (overall) b1 mm 1060 1060
4.22 Dimensions des fourches - Fork dimensions s / e / l mm 40 / 100 / 1150 40 / 100 / 1150
4.23 Tablier porte fourche suivant norme DIN 15173 A/B - Fork carriage to DIN 15173 A/B FEM2A FEM2A
4.24 Largeur du tablier porte fourches (avec dosseret de charge) - Width of fork carriage b3 mm 1025 (+30) 1025 (+30)
4.31 Garde au sol sous le mât - Ground clearance below mast m1 mm 108 108
4.32 Garde au sol au centre de l’empattement - Ground clearance at centre of wheel-base m2 mm 90 90
4.33 Largeur d’allée pour palette 1000x1200 en travers - Width of aisle for pallet 1000x1200 crossways Ast mm 3161 3271
4.34 Largeur d’allée pour palette 800x1200 en longueur - Width of aisle for pallet 800x1200 lengthways Ast mm 3260 3370
4.35 Rayon de giration - Turning radius Wa mm 1440 1550
4.36 Rayon de braquage intérieur - Inner turning radius b13 mm 0 0
Per
form
ance
sP
erfo
rman
ces
5.1 Vitesse de translation en charge / à vide - Speed of travel laden / unladen km/h 14 / 14 14 / 14
5.2 Vitesse d’élévation en charge / à vide - Speed of raise laden / unladen m/s 0.29 / 0.44 0.28 / 0.44
5.3 Vitesse de descente en charge / à vide - Speed of lowering laden / unladen m/s 0.31 / 0.50 0.32 / -
5.5 Force de traction nominale en charge / à vide - Nominal towing power laden / unladen N 12900 / 8300 - / -
5.7 Rampe en charge / à vide - Gradeability with / without load % 20 / 20 20 / 20
5.10 Frein de service - Service brake Disque à bain d’huileOil bath multidisc
Disque à bain d’huileOil bath multidisc
Mot
oris
atio
nsEn
gine
s
6.1 Puissance moteur translation - Drive motor, hourly capacity kW 2 x 4.6 2 x 4.6
6.2 Puissance moteur élévation - Lifting motor, capacity duty factor kW 8.2 8.2
6.4 Batterie tension / capacité - Batterye voltage / capacity V / Ah 48 / 440 48 / 550
Div
ers
Mis
cella
neou
s
8.1 Contrôle de la puissance - Power control Inverter Inverter
8.2 Pression hydraulique de service pour accessoires - Operating pressure for attachments bar 145 145
8.3 Débit d’huile pour accessoires - Oil flow for attachments l/min 65 65
1 - Valeurs données avec mât duplex - Values with duplex mast2 - D’autres valeurs sont disponibles selon les types de mâts - Other values are available according to the mast typeLes performances et dimensions sont des valeurs nominales obtenues dans des conditions de fonctionnement normales. Les produits Manitou et les spécifications sont susceptibles de modification sans avis préalables.Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice.
DESSINS DIMENSIONNELS - DIMENSIONAL DRAwINGS
Mod
èle
Mod
el
Typedu mât
Mast type
Mât de levage
Mast fork height
Levée libre
Free lift
Hauteur du mât
Mast height
Inclinaison
Mast Tilt
Valeurs sans accessoires
Values without attachment
Valeurs avec PDF
Value with forks positionner
Capacité à hauteur maxi CDG
à 500 mm
Load capacity at 500 mm (KG)
Capacité à hauteur maxi CDG
à 500 mm
Load capacity at 500 mm (KG)
H3 H2
baisséH1
lowered H1
déployé avec
dosseret H4
extented with
backrest H4
déployé sans
dosseret H4
extented without
backrest H4
AV
FWD
AR
RWD1.5 t 1.6 t 1.5 t 1.6 t
ME3
15/3
16
Duplex visibilité totale
2 Stages Total visibility
2500 145 1745 3445 3065 6.5° 6.5° 1500 1600 - -
2700 145 1845 3645 3265 6.5° 6.5° 1500 1600 - -
3000 145 1995 3945 3565 6.5° 6.5° 1500 1600 - -
3300 std 145 2145 4245 3865 6.5° 6.5° 1500 1600 - -
3500 145 2245 4445 4065 6.5° 6.5° 1500 1600 - -
3600 145 2295 4545 4165 6.5° 6.5° 1500 1600 - -
4000 145 2545 4945 4565 3.5° 5° 1500 1600 - -
4300 145 2710 5245 4865 3.5° 5° 1400 1500 1150 1300
4500 145 2820 5445 5065 3.5° 5° 1300 1400 - -
Duplex levée libre
2 Stages Free Lift
3300 - - 4245 3865 6.5° 6.5° 1500 1600 - -
Triplex levée libre
3 Stages Free Lift
4300 1100 2010 5245 4905 3.5° 5° 1400 1500 1150 1300
4500 1170 2075 5445 5105 3.5° 5° 1300 1400 - -
4800 1270 2175 5745 5405 3.5° 5° 1200 1300 - -
5000 1340 2240 5945 5605 3.5° 5° 1150 1250 - -
5500 1500 2410 6445 6105 3.5° 5° 1050 1150 - -
6000 1670 2625 6945 6625 3.5° 5° 950 1050 - -
CARACTéRISTIQUES DES MâTS ET CAPACITéS RéSIDUELLES - MAST DIMENSIONS AND RATED CAPACITIES
1800 - 2000 kg
CARACTéRISTIQUES PRINCIPALES - TECHNICAL SPECS
Dés
ign
atio
nS
pec
ifica
tio
ns
1.1 Fabricant - Manufacturer MANITOU MANITOU
1.2 Modèle - Model ME318 ME320
1.3 Propulsion : batterie, diesel, essence, GPL, secteur - Power source : battery, diesel, gasoline, LPG, mains
BatterieBattery
BatterieBattery
1.4 Type de conduite : manuel, accompagnant, debout, assis - Driving position : manual, walking alongside, standing, seated
AssisSeated
AssisSeated
1.5 Capacité nominale / charge sur fourche (capacité de base) - Nominal capacity / load on forks Q t 1,8 2
1.6 Centre de gravité de la charge - Load - centre of gravity c mm 500 500
1.8 Distance de la face d’appui de la charge au centre de l’essieu avant(1) - Distance from the load-bearing surface to centre of front axle(1) x mm 355 355
1.9 Empattement - Wheelbase y mm 1358 1465
Po
ids
Wei
gh
ts
2.1 Poids du chariot en ordre de fonctionnement - Operating weight kg 3170 3565
2.2 Poids en charge sur essieu avant / arrière - Axle load, with load, front / rear kg 4420 / 550 4865 / 700
2.3 Poids sans charge sur essieu avant / arrière - Axle load, without load, front / rear kg 1500 / 1670 1690 / 1875
Ro
ues
, ch
assi
sTyr
es,
fram
e
3.1 Equipement de roues : bandage (V), PPS (SE), pneumatique gonflable (L) - Tyre equipment : bandage (V), superelastic (SE), pneumatic (L) PPS / SE PPS / SE
3.2 Dimensions roues avant - Size of front wheels “ ou mm 18 x 7 - 8 200/50 - 10
3.3 Dimensions roues arrières - Size of rear wheels “ ou mm 15 x 4,5 - 8 15 x 4,5 - 8
3.5 Nombre de roues avant (x = roue motrice) / roues arrières - Number of front wheels (x = drive wheel) / rear wheels 2x 2 2x 2
3.6 Voie (milieu des roues) avant - Front wheel gauge (middle of wheels) b10 mm 902 902
3.7 Voie (milieu des roues) arrière - Rear wheel gauge (middle of wheels) b11 mm 175 175
Dim
ensi
on
sD
imen
sio
ns
4.1 Inclinaison du mât en avant / arrière(2) - Tilt of mast forwards / backwards(2) α / β deg 6,5 / 6,5 6,5 / 6,5
4.2 Hauteur mât abaissé - Height mast lowered h1 mm 2145 2145
4.3 Levée libre - Free lift h2 mm 145 145
4.4 Hauteur de levée - Lift height h3 mm 3300 3300
4.5 Hauteur mât déployé (avec dosseret) - Height mast extended (with backrest) h4 mm 4245 4245
4.7 Hauteur du protège conducteur (cabine) - Height of overhead guard h6 mm 1998 1998
4.12 Hauteur d’attelage - Height of towing bar h10 mm 450 450
4.19 Longueur totale - Overall length l1 mm 3050 3162
4.20 Longueur jusqu’au talon des fourches - Length at fork heels l2 mm 1900 2012
4.21 Largeur totale (hors tout) - Total width (overall) b1 mm 1060 1060
4.22 Dimensions des fourches - Fork dimensions s / e / l mm 40 / 100 / 1150 40 / 100 / 1150
4.23 Tablier porte fourche suivant norme DIN 15173 A/B - Fork carriage to DIN 15173 A/B FEM2A FEM2A
4.24 Largeur du tablier porte fourches (avec dosseret de charge) - Width of fork carriage b3 mm 1025 (+30) 1025 (+30)
4.31 Garde au sol sous le mât - Ground clearance below mast m1 mm 108 108
4.32 Garde au sol au centre de l’empattement - Ground clearance at centre of wheel-base m2 mm 90 90
4.33 Largeur d’allée pour palette 1000x1200 en travers - Width of aisle for pallet 1000x1200 crossways Ast mm 3271 3380
4.34 Largeur d’allée pour palette 800x1200 en longueur - Width of aisle for pallet 800x1200 lengthways Ast mm 3370 3480
4.35 Rayon de giration - Turning radius Wa mm 1550 1658
4.36 Rayon de braquage intérieur - Inner turning radius b13 mm 0 0
Per
form
ance
sP
erfo
rman
ces
5.1 Vitesse de translation en charge / à vide - Speed of travel laden / unladen km/h 14 / 14 13 / 13
5.2 Vitesse d’élévation en charge / à vide - Speed of raise laden / unladen m/s 0.27 / 0.43 0.25 / 0.40
5.3 Vitesse de descente en charge / à vide - Speed of lowering laden / unladen m/s 0.33 / - 0.33 / -
5.5 Force de traction nominale en charge / à vide - Nominal towing power laden / unladen N - / - - / -
5.7 Rampe en charge / à vide - Gradeability with / without load % 18 / 20 15 / 18
5.10 Frein de service - Service brake Disque à bain d’huileOil bath multidisc
Disque à bain d’huileOil bath multidisc
Mot
oris
atio
nsEn
gine
s
6.1 Puissance moteur translation - Drive motor, hourly capacity kW 2 x 4.6 2 x 4.6
6.2 Puissance moteur élévation - Lifting motor, capacity duty factor kW 8.2 8.6
6.4 Batterie tension / capacité - Batterye voltage / capacity V / Ah 48 / 550 48 / 660
Div
ers
Mis
cella
neou
s
8.1 Contrôle de la puissance - Power control Inverter Inverter
8.2 Pression hydraulique de service pour accessoires - Operating pressure for attachments bar 145 145
8.3 Débit d’huile pour accessoires - Oil flow for attachments l/min 65 65
1 - Valeurs données avec mât duplex - Values with duplex mast2 - D’autres valeurs sont disponibles selon les types de mâts - Other values are available according to the mast typeLes performances et dimensions sont des valeurs nominales obtenues dans des conditions de fonctionnement normales. Les produits Manitou et les spécifications sont susceptibles de modification sans avis préalables.Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice.
DESSINS DIMENSIONNELS - DIMENSIONAL DRAwINGS
Mod
èle
Mod
el
Typedu mât
Mast type
Mât de levage
Mast fork height
Levée libre
Free lift
Hauteur du mât
Mast height
Inclinaison
Mast Tilt
Valeurs sans accessoires
Values without attachment
Valeurs avec PDF
Value with forks positionner
Capacité à hauteur maxi CDG
à 500 mm
Load capacity at 500 mm (KG)
Capacité à hauteur maxi CDG
à 500 mm
Load capacity at 500 mm (KG)
H3 H2
baisséH1
lowered H1
déployé avec
dosseret H4
extented with
backrest H4
déployé sans
dosseret H4
extented without
backrest H4
AV
FWD
AR
RWD1.8 t 2 t 1.8 t 2 t
ME3
18/3
20
Duplex visibilité totale
2 Stages Total visibility
2500 145 1745 3445 3065 6.5° 6.5° 1800 2000 - -
2700 145 1845 3645 3265 6.5° 6.5° 1800 2000 - -
3000 145 1995 3945 3565 6.5° 6.5° 1800 2000 - -
3300 std 145 2145 4245 3865 6.5° 6.5° 1800 2000 - -
3500 145 2245 4445 4065 6.5° 6.5° 1800 2000 - -
3600 145 2295 4545 4165 6.5° 6.5° 1800 2000 - -
4000 145 2545 4945 4565 3.5° 5° 1800 2000 - -
4300 145 2710 5245 4865 3.5° 5° 1700 1900 - -
4500 145 2820 5445 5065 3.5° 5° 1600 1800 - -
Duplex levée libre
2 Stages Free Lift
3300 - - 4245 3865 6.5° 6.5° 1800 2000 - -
Triplex levée libre
3 Stages Free Lift
4300 1100 2010 5245 4905 3.5° 5° 1700 1900 - -
4500 1170 2075 5445 5105 3.5° 5° 1600 1800 - -
4800 1270 2175 5745 5405 3.5° 5° 1500 1550 - -
5000 1340 2240 5945 5605 3.5° 5° 1450 1500 1300 -
5500 1500 2410 6445 6105 3.5° 5° 1200 1300 - -
6000 1670 2625 6945 6625 3.5° 5° 1100 1200 - -
CARACTéRISTIQUES DES MâTS ET CAPACITéS RéSIDUELLES - MAST DIMENSIONS AND RATED CAPACITIES
2500 - 3000 kg
CARACTéRISTIQUES PRINCIPALES - TECHNICAL SPECS
Dés
ign
atio
nS
pec
ifica
tio
ns
1.1 Fabricant - Manufacturer MANITOU MANITOU
1.2 Modèle - Model ME425 ME430
1.3 Propulsion : batterie, diesel, essence, GPL, secteur - Power source : battery, diesel, gasoline, LPG, mains
BatterieBattery
BatterieBattery
1.4 Type de conduite : manuel, accompagnant, debout, assis - Driving position : manual, walking alongside, standing, seated
AssisSeated
AssisSeated
1.5 Capacité nominale / charge sur fourche (capacité de base) - Nominal capacity / load on forks Q t 2,5 3
1.6 Centre de gravité de la charge - Load - centre of gravity c mm 500 500
1.8 Distance de la face d’appui de la charge au centre de l’essieu avant(1) - Distance from the load-bearing surface to centre of front axle(1) x mm 455 475
1.9 Empattement - Wheelbase y mm 1485 1625
Po
ids
Wei
gh
ts
2.1 Poids du chariot en ordre de fonctionnement - Operating weight kg 4285 5400
2.2 Poids en charge sur essieu avant / arrière - Axle load, with load, front / rear kg 5925 / 860 7365 / 1035
2.3 Poids sans charge sur essieu avant / arrière - Axle load, without load, front / rear kg 1915 / 2370 2455 / 2945
Ro
ues
, ch
assi
sTyr
es,
fram
e
3.1 Equipement de roues : bandage (V), PPS (SE), pneumatique gonflable (L) - Tyre equipment : bandage (V), superelastic (SE), pneumatic (L) PPS / SE PPS / SE
3.2 Dimensions roues avant - Size of front wheels “ ou mm 23 x 9 - 10 - 16PR 23 x 9 - 10 - 16PR
3.3 Dimensions roues arrières - Size of rear wheels “ ou mm 18 x 7 – 8 – 14PR 18 x 7 – 8 – 14PR
3.5 Nombre de roues avant (x = roue motrice) / roues arrières - Number of front wheels (x = drive wheel) / rear wheels 2x 2 2x 2
3.6 Voie (milieu des roues) avant - Front wheel gauge (middle of wheels) b10 mm 1058 1058
3.7 Voie (milieu des roues) arrière - Rear wheel gauge (middle of wheels) b11 mm 960 960
Dim
ensi
on
sD
imen
sio
ns
4.1 Inclinaison du mât en avant / arrière(2) - Tilt of mast forwards / backwards(2) α / β deg 5 / 10 5 / 10
4.2 Hauteur mât abaissé - Height mast lowered h1 mm 2186 2186
4.3 Levée libre - Free lift h2 mm 140 145
4.4 Hauteur de levée - Lift height h3 mm 3300 3300
4.5 Hauteur mât déployé (avec dosseret) - Height mast extended (with backrest) h4 mm 4356 4452
4.7 Hauteur du protège conducteur (cabine) - Height of overhead guard h6 mm 2165 2165
4.12 Hauteur d’attelage - Height of towing bar h10 mm 250 255
4.19 Longueur totale - Overall length l1 mm 3475 3645
4.20 Longueur jusqu’au talon des fourches - Length at fork heels l2 mm 2325 2490
4.21 Largeur totale (hors tout) - Total width (overall) b1 mm 1265 1260
4.22 Dimensions des fourches - Fork dimensions s / e / l mm 40 / 130 / 1150 45 / 130 / 1150
4.23 Tablier porte fourche suivant norme DIN 15173 A/B - Fork carriage to DIN 15173 A/B FEM2A FEM3A
4.24 Largeur du tablier porte fourches (avec dosseret de charge) - Width of fork carriage b3 mm 1060 1060
4.31 Garde au sol sous le mât - Ground clearance below mast m1 mm 98 102
4.32 Garde au sol au centre de l’empattement - Ground clearance at centre of wheel-base m2 mm 120 125
4.33 Largeur d’allée pour palette 1000x1200 en travers - Width of aisle for pallet 1000x1200 crossways Ast mm 3911 4071
4.34 Largeur d’allée pour palette 800x1200 en longueur - Width of aisle for pallet 800x1200 lengthways Ast mm 4010 4170
4.35 Rayon de giration - Turning radius Wa mm 2090 2230
4.36 Rayon de braquage intérieur - Inner turning radius b13 mm 45 45
Per
form
ance
sP
erfo
rman
ces
5.1 Vitesse de translation en charge / à vide - Speed of travel laden / unladen km/h 14 / 14 14 / 14
5.2 Vitesse d’élévation en charge / à vide - Speed of raise laden / unladen m/s 0.24 / 0.24 0.25 / 0.40
5.3 Vitesse de descente en charge / à vide - Speed of lowering laden / unladen m/s 0.44 / 0.36 - / -
5.5 Force de traction nominale en charge / à vide - Nominal towing power laden / unladen N 11100 / 11500 - / -
5.7 Rampe en charge / à vide - Gradeability with / without load % 15 / 25 13 / 14
5.10 Frein de service - Service brake TambourDrum
TambourDrum
Mot
oris
atio
nsEn
gine
s
6.1 Puissance moteur translation - Drive motor, hourly capacity kW 10.5 10.6
6.2 Puissance moteur élévation - Lifting motor, capacity duty factor kW 11 12.8
6.4 Batterie tension / capacité - Batterye voltage / capacity V / Ah 48 / 700 80 / 560
Div
ers
Mis
cella
neou
s
8.1 Contrôle de la puissance - Power control Inverter Inverter
8.2 Pression hydraulique de service pour accessoires - Operating pressure for attachments bar 175 175
8.3 Débit d’huile pour accessoires - Oil flow for attachments l/min 65 65
1 - Valeurs données avec mât duplex - Values with duplex mast2 - D’autres valeurs sont disponibles selon les types de mâts - Other values are available according to the mast typeLes performances et dimensions sont des valeurs nominales obtenues dans des conditions de fonctionnement normales. Les produits Manitou et les spécifications sont susceptibles de modification sans avis préalables.Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice.
Mod
èle
Mod
el
Typedu mât
Mast type
Hauteur de
levée
Lift height
Levée libre
Free lift
Hauteur du mât
Mast height
Inclinaison
Mast Tilt
Valeurs sans accessoires
Values without attachment
Valeurs avec PDF
Value with forks positionner
Capacité à hauteur maxi CDG
à 500 mm
Load capacity at 500 mm (KG)
Capacité à hauteur maxi CDG
à 500 mm
Load capacity at 500 mm (KG)
H3H2
baisséH1
lowered H1
déployé avec dosseret H4
extented with backrest H4
déployé sans dosseret H4
extented without backrest H4
AV
FWD
AR
RWD2.5 t 3 t 2.5 t 3 t
2.5 t 3 t 2.5 t 3 t 2.5 t 3 t 2.5 t 3 t
ME4
25/4
30
Duplex visibilité totale
2 Stages Total
visibility
2500 140 145 1786 1786 3556 3652 3234 3297 5° 10° 2500 3000 2400 2800
2700 140 145 1886 1886 3756 3852 3434 3497 5° 10° 2500 3000 2400 2800
3000 140 145 2006 2036 4056 4152 3734 3797 5° 10° 2500 3000 2400 2800
3300 std 140 145 2186 2186 4356 4452 4034 4097 5° 10° 2500 3000 2400 2800
3500 140 145 2286 2286 4556 4652 4234 4297 5° 10° 2500 3000 2400 2800
3600 140 145 2336 2336 4656 4752 4334 4397 5° 10° 2500 3000 2400 2800
4000 140 145 2586 2586 5056 5152 4734 4797 5° 10° 2500 3000 - -
4300 140 145 2751 2751 5356 5452 5034 5097 5° 6° 2400 2950 2300 -
4500 140 145 2861 2861 5556 5652 5234 5297 5° 6° 2300 2860 - -
4800 - 145 - 3026 - 5952 - 5597 5° 6° - 2720 - -
5000 - 145 - 3136 - 6152 - 5797 5° 6° - 2370 - -
Duplex levée libre
2 Stages Free Lift
3300 1465 1449 2150 2186 4356 4452 3985 4047 5° 10° 2500 3000 2400 -
Triplex levée libre
3 Stages Free Lift
4300 1267 1268 1976 2041 5356 5452 5019 5083 5° 6° 2400 2750 2300 -
4500 1387 1348 2096 2121 5556 5652 5219 5283 5° 6° 2300 2720 - 2500
4800 1487 1448 2196 2221 5856 5952 5519 5583 5° 6° 2100 2500 - 2300
5000 1552 1514 2261 2287 6056 6152 5719 5783 5° 6° 1900 2500 - 2000
5500 1717 1678 2426 2451 6556 6552 6219 6283 3° 6° 1900 1850 - 1600
6000 1932 1844 2641 2617 7056 7152 6719 6783 3° 6° 1220 1680 - -
DESSINS DIMENSIONNELS - DIMENSIONAL DRAwINGS
CARACTéRISTIQUES DES MâTS ET CAPACITéS RéSIDUELLES - MAST DIMENSIONS AND RATED CAPACITIES
700487FR_EN_A_0612_FT_ME.indd
Votre concessionnaire MANITOU - Your nearest MANITOU dealer:
Siège social - Head office:B.P. 249 - 430 rue de l’Aubinière - 44158 Ancenis Cedex - France
Tel: 00 33 (0)2 40 09 10 11 - Fax: 00 33 (0)2 40 09 10 97www.manitou.com
Cette publication présente le descriptif des versions et possibilités de configuration des produits Manitou qui peuvent différer en équipement. Les équipements présentés dans cette brochure peuvent être de série, en option, ou non disponibles suivant les versions. Manitou se réserve le droit, à tout moment et sans préavis, de modifier les spécifications décrites et représentées. Les spécifications portées n’engagent pas le constructeur. Pour plus de détails, contactez votre concessionnaire Manitou. Document non contractuel. Présentation des produits non contractuelle. Liste des spécifications non exhaustive. Les logos ainsi que l’identité visuelle de l’entreprise sont la propriété de Manitou et ne peuvent être utilisés sans autorisation. Tous droits réservés. Les photos et schémas contenus dans la présente brochure ne sont fournis qu’à des fins de consultation et à titre indicatif.MANITOU BF SA - Société anonyme à conseil d’administration - Capital social : 39 547 824 euros - 857 802 508 RCS Nantes
This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right to change the speci-fications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are provided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes