Frameless wall easy reach
-
Upload
domain-cabinetsdirect -
Category
Business
-
view
33 -
download
1
description
Transcript of Frameless wall easy reach
Tools Required:
Cordless Drill Level Rubber Mallet Wood Glue
PARTS LIST & ASSEMBLY INSTRUCTIONS
FRAMELESS WALL EASY REACH(Part No. WER24**)
PLAI_FL_WER24 Page 2 of 5
A B C
D E
GH
IJ
K L M N O P
ABCDEFGHI
JKLMNOP
Wall Side Panel RightWall Side Panel LeftShelfLeft Side PanelRight Side Panel
Q
Top PanelBottom PanelDoor 1Door 2 (hinge side)
Back Panel1 7/8” Screw1 1/2” DowelMetal Shelf Pin5/8” Screw
Bi-fold Door Hinge Q Door Hinge
x1x1x2x1x1x1x1x1x1
x1x26x20x12
3/4” Screwx12x8x2x2
C
F
PLAI_FL_WER24 Page 3 of 5
1. Remove all pieces from box.
2. Place Bottom Panel (G) on nonabrasive clean, flat surface.
3. Place a drop of wood glue into predrilled dowel holes and insert Dowels (L).
4. Gently tap dowels into place with rubber mallet.
1. Place a drop of wood glue into predrilled dowel holes and insert Dowels (L).
2. Gently tap dowels into place with rubber mallet.
3. Attach Wall Side Panel Left (B) using (3) 1 7/8” Screws (K)
1. Insert Back Panel (J) into routed slotsof panels B and G.
1. Place a drop of wood glue into predrilled holes on Wall Side Panel Right (A) and insert Dowels (L).
2. Attach Wall Side Panel Right (A) using (3) 1 7/8” screws (K).
G
L
LB
G
B J
G
B J
G
LA
STEP 4
STEP 3
STEP 2
STEP 1
K
K
PLAI_FL_WER24 Page 4 of 5
1. Insert Dowels (L) into predrilled dowel holes in Top Panel (F) as in Step 1.
2. Attach Top Panel (F) to Wall Side Panel Left (B) while positioning Back Panel (J) into routed slot.
3. Attach Top Panel (F) to Wall Side Panel Right (A). Take care when manuvering into position to ensure Back Panel (J) is inserted into routed slot on Wall Side Panel Right (A).
4. Using (6) 1 7/8” Screws (K) secure top panel.
1. Attach Left Side Panel (D).
2. Using (7) 1 7/8” Screws, secure Left Side Panel (D). *(Ensure bamboo edge banding is toward front of cabinet)
B J
G
A
FK
K
1. Attach Left Side Panel (D) and Right Side Panel (E).
2. Using (7) 1 7/8” Screws, secure Left Side Panel (D). *(Ensure bamboo edge banding is toward front of cabinet)
KSTEP 7
STEP 6
STEP 5
*
*
D
D E
PLAI_FL_WER24** Page 5 of 5
1. Insert Metal Shelf Pins (M) six per side.
2. Place Shelves (C) at desired height.
1. Attach Door Assembly to cabinet. Using (4) 5/8” Screws (N), line up hinge holes with predrilled holes on Side Panel (D or E).
2. Use phillips head screwdriver to adjust hinges for proper door alignment.
STEP 10
STEP 8
STEP 91. Place Door 1 (H) and Door 2 (I) on clean flat surface.
2. Insert Door Hinges (Q) into routed holes and secure with 5/8” Screws (N).
3. Open Bi-fold Door Hinge (P) and place into routed holes on Door 1 (H), secure with 3/4” Screws (O). Repeat for Door 2 (I).
Q
PI
H
M
C
C
D E
P