Formwork CONCRETE ACCESSORIES Work.pdfMagnetic System for Steel Formwork KA SERIES The KA Series...
Transcript of Formwork CONCRETE ACCESSORIES Work.pdfMagnetic System for Steel Formwork KA SERIES The KA Series...
FOR
MW
OR
K
75
MAGNETSMagnetic System for Steel Formwork
KA SERIESThe KA Series magnet is machined from solid material and fitted with high performance magnets, providing a high power system for securing DR Anchors. The magnetic surface is sealed, protecting it against corrosion and damages.Requires use of rubber seals to stabilize anchor (see DR Anchor).
MAGNETIC LOCATORUse for fixing coil or Ferrule inserts to steel forms.
PART NO. LOAD DIMENSIONS
KA-13M 1 TON 2-3/8”
KA-25M 2 TON 3”
KA-50M 4 TON 3-7/8”
KA-75M 8 TON 4-3/4”
PART NO. DIAMETER THREAD TYPE
MLC05 1/2” Coil
MLC75 3/4” Coil
MLC10 1” Coil
MLN05 1/2” NC
MLN75 3/4” NC
MLN10 1” NC
R/Z SERIESThe R/Z – Series magnetic system was specifically designed to be fitted into reusable box-outs. Compared to other systems of its kind, this system is specially sealed, to protect its magnetic side. In addition, this system is characterized by a particularly high magnetic force.
R/G SERIESThe R/G Magnetic system is designed to help with installing attachments to steel forms without drilling or bolting. Because of our high adhesion power and slender design. This magnet holds attachments on flat and vertical surface with confidence, while taking up minimal space. These magnets come standard with metric threads from 10mm through 36mm. Standard UNC thread combinations are also available.
PART NO. TENSION LOAD IN (LBS) WIDTH HEIGHT
R/Z-105 231 2” 9/16”
PART NO. TENSION LOAD IN (LBS) DIAMETER HEIGHT THREAD
R/G-105 231 2-1/16” 9/16” 10mm-36mm
R/G-190 418 2-1/16” 9/16” 10mm-36mm
Custom cut length of the rod.
76
FOR
MW
OR
K
MAGNETSP-SERIESThe Power Line Series is a high performance magnetic system for securing down precast concrete form rails. It’s the only magnet that is guaranteed and certified up to +/- 1% of the adhesion power. It has an improved performance on uneven surfaces with a more slender design requiring minimum space. Attaching a wide range of clamping accessories makes this a multi-functional system.
PART NO. TENSION LOAD IN (LBS)
LATERAL SHEAR IN (LBS)
WEIGHT IN (LBS) WIDTH LENGTH HEIGHT
P-1000 2420 806 11 2” 9” 2”
P-1600 3530 1176 15 3” 9” 2”
P-2000 4840 1613 19 4” 9” 2”
P-2500 5510 1836 24 5” 9” 2”
P-3000 7260 2420 28 6” 9” 2”
PART NO. DESCRIPTION SHAFT DIA./& HEIGHT SWIVEL ARM
NH-25200 Universal Clamping W/Ball Joint 1” x 8” 3/4” x 1-1/2” x 9-5/16”
NH-25300 Universal Clamping W/Ball Joint 1” x 12” 3/4” x 1-1/2” x 9-5/16”
Universal Clamp
FOR
MW
OR
K
77
CONCRETE FORMERS
CHAMFERFIXFor forming chamfered edges to columns and beams, Chamferfix re-usable fillet is a thick-walled extrusion of impact-strength PVC.
CHAMFERFIX WITH NAILING FLANGEWith nailing holes in the flange, this type of Chamferfix makes for easy fitting at corners of molds, and also safe stripping, which helps to achieve maximum reuse.
REFERENCE MEASUREMENT “A” LENGTH PACKING
FT/BDLE
Chamferfix 6 1/4” 8.25 FT 330
Chamferfix 11 3/8” 8.25 FT 330
Chamferfix 15 5/8” 8.25 FT 330
Chamferfix 20 3/4” 8.25 FT 330
Chamferfix 25 1” 8.25 FT 165
Chamferfix 30 1 1/4” 8.25 FT 165
PART NO. MEASUREMENT “A” LENGTH PACKING
FT/BDLE
Chamferfix-11 N 3/8” 8.25 FT 330
Chamferfix-15 N 5/8” 8.25 FT 330
Chamferfix-20 N 3/4” 8.25 FT 330
Chamferfix-25 N 1” 8.25 FT 165
Chamferfix-30 N 1 1/4” 8.25 FT 165
A
A
AA
78
FOR
MW
OR
K
ACCESSORIES
DE-BOND SHEATHINGFlexible polymer plastic tubing for effective debonding of prestressed strands, available in 10’ lengths for up to 9/16” strand.
PLASTIC TEST CYLINDER MOLDSASTM standard and proven line of disposable plastic molds for testing concrete. Thick lipped available upon request.
DOUBLE-SIDED TAPEHighest tack and shear strength synthetic adhesive system ideal for attaching inserts and block-outs to forms. Our 1/16" tape is standard.
PART NO. SIZE QTY/CTN.
DESHE Slit Version 100 x 10’
DESHEN Unslit Version 100 x 10’
PART NO. SIZE QTY/CTN.
PCM612 6” x 12” w/o Lid 24/CTN
PCM612L 6” x 12” with Lid 24/CTN
PCM612/24 w/lip 6” x 12” with Lip 24/CTN
PCM48 4” x 8” w/o Lid 36/CTN
PCM48L 4” x 8” with Lid 36/CTN
PCM48 w/lip 4” x 8” w/ Lip 36/CTN
ORDER CODE SIZE QTY/CTN.
DST 05 1/2” x 1/16” x 108’ Reel 18
DST 10 1” x 1/16” x 108’ Reel 9
DST 20 2” x 1/16” x 108’ Reel 5
DST 30 3” x 1/16” x 108’ Reel 3
DST 40 4” x 1/16” x 108’ Reel 3
DST 60 6” x 1/16” x 108’ Reel 2
STRAND RECESSESFoam plug designed to form an easily patched void at the ends of prestressed strands.
PART NO. SIZE QTY/ CTN.
STREC 1-1/8”x1-1/8”x1” 5000
FOR
MW
OR
K
79
ACCESSORIESSTANDARD PLASTIC SHIMSHigh compressive (5,000-6,000 psi), high strength polymer plastic designed to level concrete members during erection. This product exhibits extreme stability while it prevents rust, stained concrete and spalling. It is also scored for convenience of application, and will not fracture under load. Custom sizes can be made to order.
SHIMPAKSIdeal for placing and leveling large load bearing panels, each shimpak is held together with a flexible band for quick and easy access. Other sizes available on request.
REBAR TIE WIRE & DOUBLE LOOP TIESThe most comprehensive line of wire products for the concrete construction industry is available regionally from CONAC, 4” - 16” long and packaged 5000 per roll. Available in plain, galvanized or PVC.
WIRE TIE ROLLFor tieing rebar manually. Rebar Tie Wire is available in black annealed and galvanized in 16 ga. and come 20 - 3 1/2 lb. coils per carton. Made of black annealed wire.
FORMLATCHCorner clamp for a variety of forms.
PART NO. SIZE QTY/CTN.
SH 226 2”x2”x1/16” 2000
SH 228 2”x2”x1/8” 2000
SH 224 2”x2”x1/4” 1000
SH 336 3”x3”x1/16” 2000
SH 338 3”x3”x1/8” 2000
SH 334 3”x3”x1/4” 1000
SH 246 2”x4”x1/16” 2000
SH 248 2”x4”x1/8” 2000
SH 244 2”x4”x1/14” 1000
SH 446 4”x4”x1/16” 1000
SH 448 4”x4”x1/8” 1000
SH 444 4”x 4”x1/4” 500
SH 266 2”x 6”x1/16” 1000
SH 268 2”x 6”x1/8” 1000
SH 264 2”x 6”x1/4” 500
PART NO. SIZE QTY/CTN.
SHP 33 3”x 3” x 1-1 1/16” 100
SHP 44 4”x 4” x 1-1 1/16” 100
SHP 46 4”x 6” x 1-1 1/16” 50
PART NO. SIZE QTY/CTN.
WT516B 5” - 16ga Blk Loop 5000
WT616B 6” - 16ga Blk Loop 5000
WT816B 8” - 16ga Blk Loop 5000
WT1016B 10” - 16ga Blk Loop 5000
WT1016Y 10” - 16ga PVC Coat 5000
WT1216B 12” - 16ga Blk Loop 5000
WT1616B 16” - 16ga Blk Loop 2500
PART NO. SIZE QTY/ CTN.
WT16 16 Ga. 3-1/2 LB 20 pcs / box
PART N. SIZE
FORMLATCH BODY 15” Arm
FORMLATCH BALL