Formulation Information - Beauty & Personal Care … · Fruity Delight M_53995 5 2 ... D-Panthenol...

Beauty & Personal Care Applications

Formulation Information

Formulation InformationBeauty & Personal Care Applications

Attributes• Good spreadability• Leaves a non-greasy film• Powdery feel• Radiance• Silky smooth

Products• XIAMETER® PMX-0245

Cyclopentasiloxane• Dow Corning® SH 200 C

Fluid 6 CS

Multipurpose Radiance – Asian Skin ToneFace Illuminator: Radiance, Silky Smooth

Ingredient Weight % Trade Name / Supplier

Phase A

1. Sorbitan Stearate2. Ozokerite

3. Dimethicone

4. Cyclopentasiloxane

5. Tridecyl Isononanoate

25

5

28.15

5

Span 60 / UniqemaOzokerite Wax / Stahl & Pitsch, Inc.Dow Corning® SH 200 C Fluid 6 CSXIAMETER® PMX-0245 CyclopentasiloxaneCrodamol TN / Croda, Inc.

Phase B

6. Mica

7. Methylmethacrylate Crosspolymer

8

2

Submica N / LCW SensientCovabead LH 85 / LCW Sensient

Phase C

8. Water9. Butylene Glycol

10. Methylparaben

19.75

0.15

1,3-Butylene Glycol / No Supplier SpecifiedNipagin M / Clariant Corporation

Phase D

11. Mica (and) Titanium Dioxide (and) Iron Oxides (and) Triethoxycaprylylsilane

20 OTS-2 Timiron MP-29 / Daito

Procedure1. Heat Phase A and Phase C separately to 80ºC.2. Add Phase B to Phase A with mixing.3. Add Phase C to the mixture and keep stirring

until homogeneous.4. Slowly add Phase D to mixture with continued

mixing.5. Pour into suitable containers while hot.6. Cool down to room temperature.

StabilityStable for at least 2 months at room temperature and 40ºC. Well sealed packaging is required to avoid shrinkage.

Multipurpose Radiance – Asian Skin Tonecontinued


Attributes• Enhanced formula texture• Increase Substantivity• Smooth after feel• Elastic chewing gum texture• Rich nourishing emolliency

Products• XIAMETER® PMX-1501 Fluid• XIAMETER® PMX-0245

Cyclopentasiloxane• Dow Corning® 5225C Formulation Aid

• Dow Corning® HMW 2220 Non-ionic Emulsion

Pink-a-Chew CreamWater-in-Silicone Skin Cream: Elastic Chewing Gum Texture, Rich Nourishing Emolliency

Procedure1. Mix ingredients of Phase A together.2. Mix ingredients of Phase B together.3. Add Phase B slowly (drop by drop) to Phase A with continuous agitation.4. Homogenize using a high shear mixer.

StabilityStable for 3 months at room temperature.


Phase A

1. Cyclopentasiloxane (and) PEG/PPG-18/18 Dimethicone

2. Cyclomethicone

3. Cyclopentasiloxane (and) Dimethiconol

10

8.6

10

Dow Corning® 5225C Formulation Aid

XIAMETER® PMX-0245 CyclopentasiloxaneXIAMETER® PMX-1501 Fluid

Phase B

4. Divinyldimethicone / Dimethicone Copolymer (and) C12-13 Pareth-3 (and) C12-13 Pareth-23

5. Sodium Chloride6. Distilled Water7. Red 40

8. Fruity Delight M_53995

5

2to 100q.s.

q.s.

Dow Corning® HMW 2220 Non-ionic Emulsion

FD&C Red 40 W 093 / LCW Les colorants Wackherr S.A.Fruity Delight M_53995 / V.Mane Fils S.A.


Attributes• Smooth after feel• Water-in-oil emulsion• Enhance formula texture

Products• XIAMETER® PMX-200

Silicone Fluid 5CS• Dow Corning® 5200 Formulation Aid

• Dow Corning® AMS-C30 Cosmetic Wax

White DelightWater-in-Oil Skin Cream: Enhance Formula Texture

Procedure1. Mix Phase A ingredients together.2. Heat Phase A ingredients to 80ºC.3. Mix Phase B ingredients together.4. Heat Phase B to 80ºC with mixing.5. Slowly add Phase B to Phase A with turbulent mixing.6. Homogenize using a high shear mixer.

StabilityStable for at least 3 months at room temperature.


Phase A

1. Lauryl PEG/PPG-18/18 Methicone

2. C30-45 Alkyl Methicone

3. Dimethicone

4. Mineral Oil

5. Fragrance

3

4

5

17

0.4

Dow Corning® 5200 Formulation AidDow Corning® AMS-C30 Cosmetic WaxXIAMETER® PMX-200 Silicone Fluid 5CSMineral Oil / No Supplier SpecifiedWhite Grape Magic / Givaudan

Phase B

6. Distilled Water7. Sodium Chloride

8. Glycerin

66.61

3

Sodium Chloride / Fischer ScientificNo Tradename Specified / No Supplier Specified


Attributes• Clear• Medium conditioning• Colored and permed hair

Products• XIAMETER® MEM-8177 Emulsion

Clear Shampoo: Colored and Permed Hair


Phase A

1. Water2. Sodium Laureth

Sulfate (30%)3. Ammonium Lauryl

Sulfate4. Cocamidopropyl Betaine

29.935

15

6

Empicol ESB-3 / Albright & WilsonStandapol A / Cognis CorporationAmonyl 380BA / Seppic S.A.

Phase B

5. Hydrolysed Wheat Pro-tein (and) Hydrolysed Wheat Starch

6. Panthenol

7. Benzophenone-4

8. Water

1

0.3

0.1

5

Cropeptide W / Croda Chemicals Europe, Ltd.

D-Panthenol USP / BASF CorporationUvinul MS 40 / BASF Corporation

Phase C

9. Amodimethicone (and) C12-14 Sec-Pareth-7 (and) C12-14 Sec-Pareth-5

10. DMDM Hydantoin11. Laureth-2

12. PEG-150 Pentaerythrityl Tetrastearate (and) PEG-6 Caprylic / Capric Glycerides (and) Water

13. Perfume (choice)

5

0.22.5

1.7

0.5

XIAMETER® MEM-8177 Emulsion

Glydant 2000 / LonzaDehydol LS 2 / Cognis CorporationCrothix Liquid / Croda, Inc.

Procedure1. Mix Phase A ingredients until homogeneous. 2. Mix Phase B ingredients together and add to

Phase A with mixing.3. Add Phase C ingredients one at a time in order

with mixing.

StabilityStable for 6 months at room temperature and 3 months at 40ºC.

Clear Shampoo: Colored and Permed Haircontinued


Attributes• Clear• Enhanced dry combing• Enhanced wet combing• Smooth feel• Extra shine• Mild conditioning

Products• XIAMETER® OFX-5330 Fluid

Clear Shampoo: Extra Shine, Mild Conditioning


Phase A

1. Sodium Laureth Sulfate

2. Cocamidopropyl Betaine

3. Deionized Water

30

4

to 100

Empicol ESB 3 / Albright & WilsonAmonyl 380BA / Seppic S.A.

Phase B

4. Polyquaternium-10

5. Deionized Water

0.1

10

Ucare Polymer JR-400 / Amerchol Corporation

Phase C

6. PEG-150 Pentaerythrityl Tetrastearate

2 Crothix / Croda, Inc.

Phase D

7. Cocamide MIPA 2 Rewomid IPP 240 / Goldschmidt

Phase E

8. PEG/PPG-15/15 Dimethicone

2 XIAMETER® OFX-5330 Fluid

Phase F

9. Sodium Chloride

10. Citric Acid

q.s.

q.s.

Sodium Chloride / Fisher Scientific

Procedure1. Combine phase A ingredients in order.2. Heat phase A ingredients to 70-75°C.3. Heat ingredient 5 to 60°C, add ingredient 4 while gently mixing.4. Add phase B to phase A with gentle mixing.5. Add phase C to AB with gentle mixing.6. In an appropriate vessel, melt ingredient 7 in a hot water bath.7. Add blend ABC to phase D, with mixing.8. Add phase E.9. Mix until a homogeneous solution is obtained.10. Cool to room temperature.11. Adjust viscosity with sodium chloride, if necessary.12. Adjust pH to 5.5 with citric acid, if necessary.

VariationsXIAMETER® OFX-5330 Fluid can be replaced with XIAMETER® OFX-5324 Fluid.


Clear Shampoo: Extra Shine, Mild Conditioningcontinued


Attributes• Clear• Light conditioning• Wet combing• Normal to greasy hair


Clear Shampoo: Normal to Greasy Hair


Phase A

1. Water2. Sodium Laureth

Sulfate (30%)3. Cocamidopropyl

46.1535

6

Empicol ESB-3 / Albright & WilsonAmonyl 380BA / Seppic S.A.

Phase B

4. Hydroxypropyl Guar Hydroxypropyltrimonium Chloride

5. Hydrolysed Wheat Protein (and) Hyrdolysed Wheat Starch

6. Panthenol

7. Water

0.15

1

0.3

5

Jaguar C-162 / Rhodia, Inc.

Cropeptide W / Croda Chemicals Europe, Ltd.

D-Panthenol USP / BASF Corporation

Phase C

8. Green Tea Extract

9. PEG / PPG-15 / 15 Dimethicone

10. DMDM Hydantoin11. Laureth-2

12. PEG-150 Pentaerythrityl Tetrastearate (and) PEG-6 Caprylic / Capric Glycerides (and) Water

13. Perfume (choice)

0.5

1

0.22.5

1.7

0.5

Extrapon Green Tea GW / SymriseXIAMETER® OFX-5330 FluidGlydant 2000 / LonzaDehydol LS 2 / Cognis CorporationCrothix Liquid / Croda, Inc.

Procedure1. Mix Phase A ingredients until homogeneous. 2. Mix Phase B ingredients together and add to

Phase A with mixing.3. Add Phase C ingredients one at a time in order

with mixing.


Clear Shampoo: Normal to Greasy Haircontinued


Attributes• High conditioning• Colored and permed hair


Rinse-Off Conditioner: Colored and Permed Hair


Phase A

1. Water2. Hydroxyethyl Cellulose

90.451 Natrosol Plus 330 CS /

Hercules Inc.

Phase B

3. Cetrimonium Chloride

4. Cetearyl Alcohol

5. Glyceryl Stearate (and) PEG-100 stearate

0.5

1.5

0.7

Arquad 16-29 / Akzo Nobel Chemicals, Inc.Crodacol CS 90 EP / Croda Chemicals Europe, Ltd.Simulsol 165 / Seppic S.A.

Phase C

6. Amodimethicone (and) Trideceth-12 (and) Cetrimonium Chloride

7. Hydrolysed Wheat Protein PG-Propyl Silanetriol

8. Panthenol

4

0.5

0.5

XIAMETER® MEM-0949 Emulsion

Crodasone W / CrodaChemicals Europe, Ltd.

D-Panthenol USP / BASF Corporation

Phase D

9. Benzophenone-3

10. Ethylhexyl Methoxycinnamate

0.1

0.2

Escalol 567 / ISP Sutton LaboratoriesParsol MCX / DSM Nutritional Products

Ingredients continued on next page.

Procedure1. Heat water for Phase A to about 75ºC. 2. Disperse ingredient 2 into water.3. Mix until well dispersed.4. Heat Phase B ingredients to 80ºC with gentle

mixing until completely melted.5. Add Phase B to Phase A with mixing.6. Cool to approximately 40ºC with stirring.7. Add Phase C ingredients mixing well after

each addition.8. Mix Phase D ingredients together.9. Add Phase D with mixing.10. Add Phase E ingredients one at a time to the

batch and homogenize.



Phase E

1. DMDM Hydantoin2. Citric Acid 50% solution

3. Perfume

0.20.05

0.3

Glydant 2000 / LonzaNo Tradename Specified / No Supplier Specified.

Rinse-Off Conditioner: Colored and Permed Haircontinued


Attributes• Enhanced body / volume• Enhanced dry combing• Enhanced wet combing


Rinse-Off Conditioner: Enhanced Dry Combing, Enhanced Wet Combing

Procedure1. Mix ingredients of Phase A together.2. Heat to 60ºC to 70ºC.3. Add Phase B with mixing.4. Mix until melted.5. Cool to 40ºC.6. Add ingredient 5.7. Mix until uniform.8. Add ingredient 6.


Phase A

1. Deionized Water2. Hydroxyethylcellulose

90.541.5 Natrosol 250 HHR /

Hercules Inc.

Phase B

3. Cetearyl Alcohol

4. Glyceryl Stearate (and) PEG-100 Stearate

1

1

Lanette O / Cognis Corporation, Care ChemicalsArlacel 165 / Croda, Inc.

Phase C

5. Amodimethicone (and) Trideceth-12 (and) Cetrimonium Chloride

5.56 XIAMETER® MEM-0949 Emulsion

Phase D

6. DMDM 0.4 Glydant / Lonza

9. Mix until uniform.10. Compensate for the water loss due to heating.

StabilityStable for at least 6 months at room temperature.

Rinse-Off Conditioner: Enhanced Dry Combing, Enhanced Wet Combingcontinued


Attributes• Dry combing• Wet combing• Light to medium conditioning• Opaque• Reduced fly-away• Smooth feel• Extra shine


Rinse Off Conditioner: Extra Shine

Procedure1. Heat ingredient 2 to 50ºC.2. Disperse ingredient 1 in 2, with strong agitation.3. Add Phase B to phase A with gentle mixing.4. Melt ingredient 4 in a hot water bath.5. Add Phase AB to Phase C.6. Mix until a homogeneous solution is obtained.7. Add ingredients of Phase D to mixture in the mentioned order.8. Cool to room temperature.9. Adjust pH to 3.5 with Citric Acid, if necessary.



Phase A

1. Hydroxyethyl Cellulose

2. Deionized Water

1.5

50

Natrosol 250 HHR / Hercules Inc.

Phase B

3. Cetrimonium Chloride 0.3 Arquad 16-29 / Akzo Nobel

Phase C

4. Cetyl Alcohol 1

Phase D

5. PEG / PPG-27 / 27 Dimethicone

6. Deionised Water7. Preservative (choice)8. Citric Acid

2

to 1000.1q.s.

XIAMETER® OFX-5330 Fluid


Attributes• Medium fixation• Jelly like texture


Sparkling Berry Styling GelClear Gel: Jelly Like Texture


Phase A

1. Water2. VP / Acrylates / Lauryl

Methacrylate Copolymer3. Acrylates / Beheneth-25

Methacrylate Copolymer4. EDTA5. Propylene Glycol (and)

Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate

6. Red 40 (0.1% in water)

7. Perfume8. PEG-12 Dimethicone9. Sodium Hydroxide

(25% solution in water)

91.61.5

3

0.10.5

1

0.510.8

Styleze 2000 / ISP Sutton LaboratoriesAculyn 28 / Rohm & Haas

EDTA / Merck KGaALiquid Germail Plus / ISP Sutton Laboraties

FD&C Red 40 07700 / LCW SensientRaspbery Sorbet / CPL AromaXIAMETER® OFX-5324 Fluid

Phase B

10. Lactose (and) Cellulose (and) Hydroxypropyl Methylcellulose (and) Tocopheryl Acetate (and) Iron Oxides (and) Mica (and) Titanium Dioxide

11. Lactose (and) Cellulose (and) Hydroxypropyl Methylcellulose (and) Titanium Dioxide (and) Tocopherol Acetate (and) Iron Oxides

q.s.

q.s.

Lipobead Red-E / Lipo Technologies

Lipobead Yellow-EL / Lipo Technologies

The suggested percentages of Lipobead(TM) Red-E and Lipbead(TM) Yellow-EL in the formulation are 0.5%. Color and perfume can be adapted to create a specific effect.

Procedure1. Disperse ingredient 2 into water. 2. When homogeneous, add ingredient 3 and

mix well.3. When homogeneous, add ingredients 4 to 8

in order listed under slow mixing.4. Neutralize to pH 6 with NaOH.5. Finally add Phase B ingredients and mix with

moderate mixing speed.

StabilityStable for at least 6 months at room temperature and 40ºC.

Sparkling Berry Styling Gelcontinued

LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.

Dow Corning’s sole warranty is that our products will meet the sales specifications in effect at the time of shipment.

Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.

DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.

DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Dow Corning is a registered trademark of Dow Corning Corporation.XIAMETER is a registered trademark of Dow Corning Corporation.

©2012 Dow Corning Corporation. All rights reserved. Form No. 95-1133-01

Formulation Information - Beauty & Personal Care … · Fruity Delight M_53995 5 2 ... D-Panthenol...

Documents

Transcript of Formulation Information - Beauty & Personal Care … · Fruity Delight M_53995 5 2 ... D-Panthenol...