Format for Appraisal – New: M/s. GUJARAT ORGANICS LTD...

SEAC, Gujarat: of 21

SEAC, Gujarat (Appraisal-New Projects)

Format for Appraisal – New:

1. Basic Information of the Project:

i Name & Address of the Project site (Complete details with plot no. /Survey no., Landmark etc.)

M/s. GUJARAT ORGANICS LTD. (UNIT-2) PLOT NO. 910/1/B, G.I.D.C. ESTATE, JHAGADIA – 393 110, DIST: BHARUCH (GUJ.)

ii Name of the Applicant M/s. GUJARAT ORGANICS LTD. (UNIT-2)

iii Address for correspondence PLOT NO. 910/1/B, G.I.D.C. ESTATE, JHAGADIA – 393 110, DIST: BHARUCH (GUJ.)

Mo. no. :+919227524201 iv Contact no. and e-mail ID of the Applicant

e-Mail: [email protected]

v Aerial distance of nearest Habitat (KM) Village Dadheda – 0.60 km

vi Longitude & Latitude of the Project Site: (4 corners of the site)

21°37'52.61"N 73° 8'11.85"E

vii Total cost of Proposed Project

(Rs. in Crores):

Rs. 76.55 Crores

viii (1) Capital cost for EMS (Environmental Management System): Rs. 9.07 Crores. (2) Recurring cost towards the environmental protection measures: Rs. 0.9 Crores per

Annum.

ix Total Plot area ( sq. meter) 56,698.35

x Green belt area,/Tree Plantation area ( sq. meter)

8,730

xi Category as per the Schedule to the EIA Notification 2006 i.e. 1(d), 2(b), 5(f) etc.

5(f)

xii Applicability of General Conditions of EIA Notification 2006: i.e. Ensure that

I. Protected areas notified under the Wildlife (Protection) Act, 1972;

II. CEPI areas III. Eco-sensitive areas and IV. Inter-state boundaries and

international boundaries; are not located within 5 km or 10 km (as the case may be) area from the boundary of the proposed site.

NA

2. Online application proposal no. : SIA/GJ/IND2/17856/2016

3. Date of application for EC: 30/06/2017

4. Date of SEAC meeting for TOR: 21/12/2016

5. Date of TOR issued by SEIAA: 15/03/2017

6. Date of Public Hearing (If applicable): NA

7. Date of presentation for Appraisal:

8. Project status: Expansion



9. Product profile:

Sr. No.

Name of the Products

CAS no. Quantity MT/Month

End-use of product

The project falls under Category B of project activity 5(f) as per the schedule of EIA Notification 2006. Please refer Annexure – 1

10. Product wise Raw material consumption:

Sr. no.

Name of the Products

Name of the Raw Materials

CAS no. of raw materials.

Quantity MT/Month

Please refer Annexure – 1

11. Water, Air and Hazardous waste management:

Sr. no.

Particulars Details

A Water Source of Water Supply (GIDC Bore well, Surface water etc...)

GIDC i

Status of permission from the concern authority. Please refer Annexure – 2

ii Water consumption (KL/day)

Existing KL/day

(A) Domestic

(B) Gardening

(C) Industrial

Process

Washing

Boiler

Cooling

Others

Please refer Annexure – 3

iii Waste water generation (KL/day)

-

Category Existing KL/Day

Remarks

(A) Domestic

(B) Industrial

Process

Washing



Boiler

Cooling

Others

Total Industrial waste water

- Please refer Annexure – 3

iv Treatment facility with capacity (ETP, CETP, MEE, STP etc).

ETP, MEE & RO

Domestic & Industrial: v Mode of Disposal & Final meeting point Total wastewater generation will be 324

m3/day (Domestic: 75 m3/day + Industrial: 249 m3/day). The Industrial wastewater i.e. Process Water + Washing + RO Reject (100 + 50 + 50 = 200 m3/day) shall be treated in MEE and then after MEE Condensate (200 m3/day) + Domestic + Cooling Tower Make up + Boiler Blow Down (75 + 74 + 25 = 174 m3/day) i.e. Total: 374 m3/day (200 + 174) shall be treated in ETP. Part of Treated Effluent from ETP i.e. 200 m3/day shall be discharged through underground pipeline of Narmada Clean Tech Ltd. (NCTL) to deep sea (Arabian Sea) and part of treated effluent i.e. 174 m3/day shall be treated in RO system from which RO permeate i.e. 124 m3/day shall be reused in plant for Boiler water and RO reject i.e. 50 m3/day shall be treated in MEE.

vi Reuse/Recycle details (KL/day) Part of treated effluent i.e. 174 m3/day shall be treated in RO system from which RO permeate i.e. 124 m3/day shall be reused in plant for Boiler water and RO reject i.e. 50 m3/day shall be treated in MEE.

B Air Flue gas emission details No. of Boilers/TFH/Furnaces/DG sets etc. with capacities viz. TPH, Kcal/hr, MT/hr, KVA etc.

i

-

SR.

no.

Source of

emission

With

Capacity

e.g. Boiler

(8 TPH)

Stack

Height

(meter)

Name

of the

fuel

Quantity

of Fuel

MT/hr &

MT/Day

Type of

emissions

i.e. Air

Pollutants

APCM

NAAQS

(National

Ambient

Air Quality

Standards)




ii Process gas i.e. Type of pollutant gases (SO2, HCl, NH3, Cl2, NOx etc.)

-

Sr.

no.

Source of

emission

Type of

emission

Stack/Vent

Height

(meter)

APCM

NAAQS

(National

Ambient Air

Quality

Standards)

1


iii Fugitive emission details with its mitigation measures. Refer Chapter – 7 of EIA Report, Page No. 7-15 to 7-17

C Hazardous waste (as per the Hazardous and Other Wastes (Management and Transboundary Movement) Rules 2016.

i

Sr. no.

Type/Name of Hazardous waste

Source of generation

Category and Schedule as per HW Rules.

Quantity (MT/Annum)

Disposal Method

Quantity of discarded containers must be in MT/Annum. Please refer Annexure – 5

ii Membership details of CETP, TSDF, CHWIF, Common MEE etc.

NCTL - CETP BEIL - TSDF

ii Details of Non-Hazardous waste & its disposal (MSW and others)

-

D

i Solvent management (If any) Details of Solvent recovery (As per respective ToR)

Refer Chapter – 7 of EIA Report, Page No. 7-32 to 7-34

ii VOC emission sources and its mitigation measures

-

12. Details of Environmental Consultants:

Sr. no.

Particulars Details

i Name of the Consultant M/s. Aqua-Air Environmental Engineers Pvt. Ltd., Surat

ii Validity of Certificate of accreditation issued by the NABET, QCI

Stay Order



iii Accreditation for the categories -

iv Any other details -

13. Details regarding EIA report:

Sr. no.

Particulars Details Page no. of EIA report

a Ensure that there is no change in EIA report compared to ToR application i.e. Form-1 & PFR

No Change -

b Baseline environmental monitoring period

Oct., 2016 to Dec., 2016 3-1

c Baseline study area (5 km or 10 km) 10 km 3-11

d No. of AAQM stations including project site

8 3-11

e Parameters considered for AAQM & ensure that project specific parameters are considered.

Parameters are selected as per National Ambient Air Quality Standards (NAAQS) (2009) & Project Specific also

3-13 to 3-14

f Conclusion of the Monitoring (Baseline study) Air, Water & Land

Refer Chapter – 8 of EIA Report 8-5 to 8-8

Parameters considered for AAQM including project specific parameters.

g

-

Sr. no. Parameters Range of Concentrations

(µg/m3 )

Remarks

- Refer Chapter – 3 of EIA Report, Page No. 3-13 to 3-14

h Whether the results of AAQM are within the norms prescribed in NAAQS?

Yes all results are within the prescribed norms

3-13 to 3-14

i Comments for AAQM results w.r.t. NAAQS Refer Chapter – 8 of EIA Report

8-5 to 8-6

j Software used for the mathematical Modelling for anticipated incremental GLCs (Ground Level Concentrations)

ISC-AERMOD View by Lakes Environmental, Canada

4-9

k The resultant concentrations w.r.t. NAAQS and its conclusion.

Refer Chapter – 4 of EIA Report

4-14 to 4-15

l Suggested mitigation measures w.r.t. Air Refer Chapter – 7 of EIA Report

7-14 to 7-15

m Conclusion of the Monitoring during baseline study of water


8-6 to 8-7

n Suggested mitigation measures w.r.t. Water


7-12 to 7-13

o Conclusion of the Monitoring during baseline study of Land


8-8

p Suggested mitigation measures w.r.t. Land Refer Chapter – 7 of EIA Report

7-20 to 7-21

q Conclusion of the Monitoring during baseline study of Noise


8-7

r Suggested mitigation measures w.r.t. Noise


7-17 to 7-19

s Main issues in Public hearing (If NA -



applicable)

t Brief description of Public hearing

Main Issues raised by stake holders

Commitments by Project proponent and action plan.

- Not Applicable

Major hazardous chemicals and worst case scenario considered in Risk Analysis report.


6-4 to 6-15 6-45 to 6-73

u

Comments/Suggestions/mitigation measures in brief


6-74 to 6-79

v An undertaking by the Project Proponent

on the ownership of the EIA report as per

the OM of MoEF&CC dated 05/10/2011

and an undertaking by the Consultant

regarding the prescribed TORs have been

complied with and the data submitted is

factually correct as per the OM of

MoEF&CC dated 04/08/2009.

Refer Index of EIA Report I-21 to I-24

w Any other details: - -

Name & designation

of the Applicant: M.K.Malek

Manager (Production & EHS)

Stamp & Signature of Applicant: __________

Date: 12/07/2017

General Instructions

• Format shall be in WORD Format (Font type- Arial, Font size- 11)

• Provide authenticated (with stamp & Signature) hard copy during presentation.

• Kindly mail to: [email protected] and copy to all members.

• Above data should be as per application Form-1 & PFR.

• Incorporate relevant details in respective column. Do not attach Annexure in Format.



ANNEXURE-1

LIST OF PRODUCTS ALONG WITH PRODUCTION CAPACITY

Product Group

No.

Sr. No.

Product Nature Of the Product

Capacity MT/Month

CAS Nos. End Use

1 Salicylic Acid

Solid

69-72-7

As a preservative in food products, in the manufacturing of methyl salicylate, o-Anisic acid & 2-ethoxy benzoic acid

2 Zinc Salicylate Solid

16283-36-6 Used as antiseptic & astringent agent

3 2-Hydroxy Benzonitrile Solid

611-20-1 Used in the synthesis of fungicide, Azoxystorbin.

4 2- Hydroxy Phenyl Acetic Acid

Solid 614-75-5

In the synthesis of fluoxastorbin

5 2-Hydroxy Phenyl Acetic Acid Methyl Ester

Solid 22446-37-3 As a drug intermediate

6 6 Hydroxy-2-Naphthoic Acid

Solid

16712-64-4

In the synthesis of 5-bromo-6-hydroxy-2-napthoic acid & in liquid crystals & resin

7 6 Hydroxy-2-Naphthoic Acid Methyl Ester

Solid 17295-11-3 As a drug intermediate

8 P-Hydroxy Benzoic Acid

Solid

99-96-7

In the synthesis of various bulk drug preservatives (Parabens); in liquid crystal polymers & in the synthesis of p-Anisic acid

9 O-Cresotic Acid Solid

83-40-9 In the manufacturing of dye & as drug intermediate.

10 4- Hydroxy Benzonitrile

Solid

767-00-0

Intermediate for liquid crystal; as intermediate of bromoxynil & in the drug Fabuxostat

11 4- Hydroxy Phenyl Acetic Acid

Solid 156-38-7

It is used as intermediate of atenolol syntheses

12 4- Hydroxy Phenyl Acetic Acid Methyl Ester

Solid

14199-15-6

In the synthesis of 2-[3-(2H-Benzonitrizole-2yl)-4-hydroxy phenyl methacrylate

13 3-Methyl Salicylic Acid Solid






16 3-Hydroxy Benzoic Acid Methyl Ester

Solid 19438-10-9 As drug intermediate

17 2,4-Dihydroxy Benzoic Acid

Solid 89-86-1

In the synthesis of ester; in the synthesis of 2, 6-Dimethoxy Benzoic Acid

1

18 2,6-Dihydroxy Benzoic Acid

Solid

500 MT/Month

303-07-1

In the Synthesis of 2, 4-Dihydroxy Benzoic Acid (Ester) which is used as drug intermediate.



Product Group

No.

Sr. No.


Capacity MT/Month

CAS Nos. End Use

19 6 Methoxy -2-Naphthoic Acid


20 6 Methoxy -2-Naphthoic Acid Methyl Ester


2

21 6-Methoxy-2-Naphthaldehyde

Solid 3453-33-6

Raw material for the synthesis of rheumetic drug Nabumetone.

22 3- Chloro Salicylic Acid Solid

1829-32-9 In the synthesis of ester & 3-chloro-2-methoxy benzoic acid

23 3- Chloro Salicylic Acid Methyl Ester


24 3-Chloro -2-Methoxy Benzoic Acid


25 3-Chloro -2-Methoxy Benzoic Acid Methyl Ester

Liquid Not Available As drug intermediate

26 3-Chloro -2-Ethoxy Benzoic Acid

Solid Not Available As drug intermediate

27 3-Chloro -2-Ethoxy Benzoic Acid Methyl Ester


28 4-Chloro Salicylic Acid

Solid

5106-98-9

In the synthesis of 4-Chloro-2-Methoxy Benzoic Acid & 4-chloro-2-methoxy benzoic acid ester

29 4-Chloro Salicylic Acid Methyl Ester


30 4-Chloro -2-Methoxy Benzoic Acid


31 4-Chloro -2-Methoxy Benzoic Acid Methyl Ester

Low Melting Solid Not Available As drug intermediate



33 4-Chloro -2-Ethoxy Benzoic Acid Methyl Ester


34 5-Chloro Salicylic Acid

Solid

321-14-2

In the synthesis of 5-Chloro-2-methoxy benzoic acid; which is used as intermediates of glibenclamide drug

35 5-Chloro Salicylic Acid Methyl Ester

Low Melting Solid

4068-78-4 As drug intermediate

36 5- Chloro-2-MethoxyBenzoic Acid


37 5- Chloro-2-Methoxy Benzoic Acid Methyl Ester

Liquid 33924-48-0 As drug intermediate



3

39 5-Chloro -2-Ehoxy Benzoic Acid Methyl Ester


4 40 Methyl Salicylate

Liquid 119-36-8 In perfumery for flavoring



Product Group

No.

Sr. No.


Capacity MT/Month

CAS Nos. End Use

candies as counter irritant

41 Ethyl Salicylate Liquid

118-61-6 Used in many artificial perfumes also used as counter irritant

42 Phenyl Salicylate

118-55-8

In the manufacture of various polymers for plastic industry. It also act as analgesic; antipyretic & as anti inflammatory agent

43 Methyl- 3-Methyl Salicylate

23287-26-5 Pharmaceutical application


Liquid 4670-56-8 Pharmaceutical application


Liquid 22717-57-3 Pharmaceutical application

46 Benzyl Benzoate

Liquid

120-51-4

Used as a solvent of cellulose acetate, nitrocellulose & antifical; perfume fixative, in confertionary & chewing gum favours

47 4-Cyano Phenyl Acetate

Liquid 13031-41-9

As drug intermediate or as synthetic intermediate

48 Methyl Paraben

Solid

99-76-3

As preservative in food, beverages & cosmetics & bulk drugs; as drug intermediates in the synthesis of drug raloxifen

49 Ethyl Paraben Solid

120-47-8 Preservative for pharmaceuticals

50 Propyl Paraben Solid

94-13-3 Preservative in bulk drug; pharmaceutical aid (antifungal)

51 Butyl Paraben Solid

94-26-8 Preservative in bulk drug; pharmaceutical aid (antifungal)

52 Iso Propyl Paraben Solid

4191-73-5 Mainly used as antiseptic in cosmetics; it can also be used as food preservative

53 Iso Butyl Paraben Solid

4247-02-3 it is an antimicrobial preservative for bulk drug

54 Benzyl Paraben Solid

94-18-8 Used in cosmetics products it is also used as antimicrobial preservatives

55 Sodium Benzyl Paraben

Solid 94-19-8

Used in cosmetics products it is also used as antimicrobial preservatives

56 Sodium Methyl Paraben

Solid

5026-62-0

In the manufacturing of personal care products; it is also used as preservative in cosmetics & bulk drug formulations

57 Sodium Ethyl Paraben Solid

35285-68-8 As preservative in cosmetics & bulk drug formulations

5

58 Sodium Propyl Paraben Solid

35285-69-9 As preservative in



Product Group

No.

Sr. No.


Capacity MT/Month

CAS Nos. End Use

cosmetics & bulk drug formulations

59 Sodium Butyl Paraben Solid

36457-20-2 As in cosmetics & bulk drug formulation as preservative

60 Sodium Iso Propyl Paraben

Solid 36457-21-3

As in cosmetics & bulk drug formulation as preservative

61 Sodium Iso Butyl Paraben

Solid 84930-15-4

As in cosmetics & bulk drug formulation as preservative

62 Gujsol - 1

Liquid Formulation

[2-Phenoxy Ethanol(CAS NO. 122-99-6), Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3), Butyl Paraben (CAS NO.94-26-8)]

Used in cosmetics & bulk formulations & as preservatives.

63 Gujsol - 2

Liquid Formulation

[2-Phenoxy Ethanol(CAS NO. 122-99-6), Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3), Butyl Paraben (CAS NO.94-26-8), Iso Butyl Paraben (CAS NO.4247-02-3)]


64 Gujsol - 3

Liquid Formulation

[2-Phenoxy Ethanol(CAS NO. 122-99-6), Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3)]


65 Gujsept

Solid Formulation

[Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3)]


66 Gujsept Sodium

Solid Formulation

[Methyl Paraben Sodium (CAS NO. 5026-62-0), Ethyl Paraben Sodium (CAS NO. 35285-68-8), Propyl




Product Group

No.

Sr. No.


Capacity MT/Month

CAS Nos. End Use

Paraben Sodium (CAS NO. 35285-69-9)]

67 Gujstat

Solid Formulation

[Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3), Butyl Paraben (CAS NO.94-26-8)]


68 Gujgaurd Bpx

Liquid Formulation

[2-Phenoxy Ethanol(CAS NO. 122-99-6), Methyl Paraben (CAS NO.99-76-3), Bronopol (CAS NO. 52-51-7), Propyl Paraben (CAS NO. 94-13-3)]


69 Gujpar

Liquid Formulation

[2-Phenoxy Ethanol(CAS NO. 122-99-6), Sodium Propyl Paraben (CAS NO. 35285-69-9), Iso Butyl Paraben (CAS NO.4247-02-3), Butyl Paraben (CAS NO. 94-26-8), Absolute Alcohol (CAS NO. 64-17-5)]


70

Gujsol-4 Liquid Formulation

[2-Phenoxy Ethanol(CAS NO. 122-99-6), Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3), Butyl Paraben (CAS NO.94-26-8), Iso Butyl Paraben (CAS NO.4247-02-3)]


71


[2-Phenoxy Ethanol(CAS NO. 122-99-6), Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3), Butyl Paraben (CAS NO.94-26-8), Iso




Product Group

No.

Sr. No.


Capacity MT/Month

CAS Nos. End Use

Butyl Paraben (CAS NO.4247-02-3)]

72


[2-Phenoxy Ethanol(CAS NO. 122-99-6), Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3), Butyl Paraben (CAS NO.94-26-8)]


73




74

Gujsept-2 Solid Formulation

[Propylene Glycol (CAS NO.), Benzyl Alcohol (CAS NO. 100-51-6), Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3), Butyl Paraben (CAS NO.94-26-8)]


75


[Methyl Paraben (CAS NO.99-76-3), Propyl Paraben (CAS NO. 94-13-3)]


76




77


[Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3)]


78


[Methyl Paraben (CAS NO.99-76-3), Propyl Paraben (CAS NO. 94-13-3)]


79 Gujstat-2 Solid

[Ethyl Paraben Used in cosmetics & bulk



Product Group

No.

Sr. No.


Capacity MT/Month

CAS Nos. End Use

Formulation (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3)]

formulations & as preservatives.

80

Gujstat-3 Solid Formulation



81

Gujgaurd mpa Solid Formulation

[Methyl Paraben (CAS NO.99-76-3), Ethyl Paraben (CAS NO. 120-47-8), Propyl Paraben (CAS NO. 94-13-3), Butyl Paraben (CAS NO.94-26-8), Iso Butyl Paraben (CAS NO.4247-02-3)]


82

Gujgaurd mps Solid Formulation

[Methyl Paraben (CAS NO.99-76-3), Propyl Paraben (CAS NO. 94-13-3), Benzyl Alcohol (CAS NO. 100-51-6)]


83

Guj ben Solid Formulation

[Methyl Paraben (CAS NO.99-76-3), Propyl Paraben (CAS NO. 94-13-3), Propylene Glycol (CAS NO. 57-55-6) or Water (CAS NO. 7732-18-5)]


84

Gujcombin sk Solid Formulation

[Methyl Paraben (CAS NO.99-76-3), Propyl Paraben (CAS NO. 94-13-3), Propylene Glycol (CAS NO. 57-55-6) or Water (CAS NO. 7732-18-5), Diazolidinyl Urea (CAS NO.7849-02-8)]


85

Gujcombin a Solid Formulation

[Propyl Paraben Sodium (CAS NO. 35285-69-9), Butyl Paraben Sodium (CAS NO.36457-20-2)]


86

Gujacide a Liquid Formulation

[Methyl Paraben Sodium (CAS NO. 5026-62-0), Ethyl




Product Group

No.

Sr. No.


Capacity MT/Month

CAS Nos. End Use

Paraben Sodium (CAS NO. 35285-68-8), Butyl Paraben Sodium (CAS NO.36457-20-2)]

87

Gujcare dmp Liquid Formulation

[Methyl Paraben (CAS NO.99-76-3), Propyl Paraben (CAS NO. 94-13-3), Iso Propyl Paraben (CAS NO.4191-73-5)]


88 2- Ethoxy Benzoic Acid Liquid

134-11-2 Drug intermediate of Viagra (SILDENAFIL CITRATE)

89 2- Ethoxy Benzoic Acid Methyl Ester

Liquid 3686-55-3 Used as drug intermediate

90 2- Ethoxy Benzoic Acid Ethyl Ester


91 4- Ethoxy Benzoic Acid Solid 619-86-3 Used as drug intermediate

92 4- Ethoxy Benzoic Acid Methyl Ester


93 4- Ethoxy Benzoic Acid Ethyl Ester

Liquid

23676-09-7

As catalyst in poly propylene manufacturing; intermediate in synthesis of various products

94 P-IsoPropoxy Benzoic Acid

Solid

13205-46-4

Ester of para iso propoxy benzoic acid is used as catalyst for polypropylene manufacturing

95 P-IsoPropoxy Benzoic Acid Methyl Ester

Liquid

35826-59-6


96 P-IsoPropoxy Benzoic Acid Ethyl Ester

Liquid

122488-52-2


97 P – Anisic Acid

Solid

100-09-4

Para Anisic acid has an antiseptic application. It is also used in dye application & as synthetic drug intermediates also used in agrochemicals intermediates.

98 P – Anisic Acid Methyl Ester

Liquid 121-98-2

As intermediates in synthesis

99 P – Anisic Acid Ethyl Ester

Liquid 94-30-4

As intermediates in synthesis

6

100 O-Anisic Acid

Solid

579-75-9

Used in chemical reaction as intermediates to obtain target materials such as dyes, pharmaceuticals, perfumes, photo initiators and agrochemicals.



Product Group

No.

Sr. No.


Capacity MT/Month

CAS Nos. End Use

101 O– Anisic Acid Methyl Ester

Liquid 606-45-1

As intermediate in synthesis of drug intermediate

102 O– Anisic Acid Ethyl Ester

Liquid 7335-26-4


103 O - Anisic Acid Phenyl Ester

Solid Not Available


104 m-Anisic Acid Solid

586-38-9 Used in perfumes; used as drug intermediates

105 2-Ethoxy Benzamide Solid 938-73-8 As Analgesics drug

106 Ethyl Benzoate

Liquid

93-89-0

Used in perfumery under the name essencede niobe. As artificial fruit essence; as catalyst in the synthesis of polypropylene.

107 3-Methoxy Phenol

Liquid

150-19-6

In the synthesis of 4-bromo-3-methoxy phenol; as antioxidant; acts as building block in the synthesis of organic compound

108 2-Ethoxy Phenol

Liquid

94-71-3

It is used as intermediated in chemical synthesis mainly for pharmaceuticals & food flavoring application

109 2,6-Dimethoxy Benzoic Acid

Solid

1466-76-8

Application as agrochemical intermediate in the synthesis of 3-bromo-2, 6-dimethyl Benzamide.

110 4-[N-(2-Methoxy Benzoyl)Sulfomoyl]Benzoyl Chloride

Solid 816431-72-8

As fungicide / herbicide for crops

111 Resorantel OR (N-(4-Bromo Phenyl)-2, 6-Dihydroxy Benzamide

Solid 20788-07-2

It is a drug which acts as anathematic agent

112 2,4-Dihydroxy Benzoic Acid Methyl Ester


113 2,6-Dihydroxy Benzoic Acid Methyl Ester

Solid 2150-45-0 As synthetic intermediates

114 1-Hydroxy -2 – Naphthoic Acid

Solid

86-48-6

Raw material for the synthesis of 1-hydroxy-2-napthoic acid phenyl ester used in photography

115 1-Hydroxy -2 – Naphthoic Acid Phenyl Ester

Solid 132-54-7

Used in photography; in chemical synthesis; in dyestuff intermediates

116 1-Methoxy-2-Naphthoic Acid

Solid 883-62-5

As intermediate in drug synthesis

117 1-Methoxy-2-Naphthoic Acid Methyl Ester

Solid Not Available As synthetic intermediates

118 1-Ethoxy-2-Naphthoic Acid

Solid Not Available As synthetic intermediates

7

119 1-Ethoxy-2-Naphthoic Solid

Not Available As synthetic intermediates



Product Group

No.

Sr. No.


Capacity MT/Month

CAS Nos. End Use

Acid Methyl Ester

120 4-Cyano -2-Nitro Phenol

Solid 3272-08-0 As synthetic intermediates

121 3-Amino Salicylic Acid Solid 570-23-0 Used as drug mesalazine

122 3-Amino Salicylic Acid Methyl Ester


123 4-Amino Salicylic Acid Solid

65-49-6 As antibacterial (Tuberculostatic)



125 5-Amino Salicylic Acid

Solid

89-57-6

Used as inflammatory bowel disease & to maintain remission crohn's disease

8


Solid 42753-75-3

As intermediate in drug synthesis

Total 500

MT/Month



ANNEXURE-2



ANNEXURE-3

WATER CONSUMPTION AND WASTEWATER GENERATION

NOTE:

� High COD effluent for evaporation in MEE. � Industrial effluent is being treated in own ETP consisting of Primary, Secondary & Tertiary

treatment & followed by RO � Treated effluent will be drained to Common effluent piping laid by NCT � Provision will be made to recycle back treated effluent from ETP by using RO for further

polishing & then recycled back to Process use or in Boiler.

SR.

NO.

PARTICULARS WATER CONSUMPTION

m³/day

EFFLUENT

GENERATION

m³/day

1 Domestic 75 75

Industrial

2 Process 100 100

3 Boiler (Recycle from RO) 124 25

4 Cooling 467 74

5 Washing 50 50

Total Industrial 741

(Fresh 617 + Recycled 124)

249

6 Gardening 25 0

Grand Total 841

(Fresh 717 + Recycled 124)

324



ANNEXURE-4

DETAILS OF FLUE GAS EMISSIONS

Sr.

No.

Source of

Emission

Type of

Fuel

Type of

Emission

Permissible

Limit

Temperature

of Flue Gas

Stack

Height

(meter)

Stack

Diameter

(meter)

1 Boiler stack

(8 Tons/Hr)

Furnace

Oil/Natural

Gas

SPM

SO2

NOx

150 mg/Nm3

100 ppm

50 ppm

125 0C 30 1

2 Thermic Fluid

Heater

(4 Lakh

Kcal/Hr)

Furnace

Oil/Natural

Gas

SPM

SO2

NOx

150 mg/Nm3

100 ppm

50 ppm

125 0C 30 1

3 DG Sets

(500 KVA x

3 nos.)

Furnace

Oil/Natural

Gas

SPM

SO2

NOx

150 mg/Nm3

100 ppm

50 ppm

550 0C 25 0.15



ANNEXURE-5

DETAILS OF HAZARDOUS WASTE AND ITS MODE OF DISPOSAL

Sr.

No Type of Waste

Category

Generation

Per Month

Source of

Generation

Mode of

Storage

Mode of Treatment &

Disposal

1. ETP Waste 35.3 25 MT

From

Primary

Treatment

Storage in

hazardous

waste

storage

area

Collection, Storage,

Transportation & Sent to

TSDF site of M/s. BEIL,

Ankleshwar

2. Used Oil 5.1 0.01 KL Machinery

Storage in

Drums in

H.W.

Storage

area


Transportation & Sale to

registered re-processor

or use for lubrication

within premises

3. Sodium Sulphate 37.3 793 MT

4. Potassium

Sulphate 37.3 1350 MT

From MEE

5. Sodium Bromide - 250 MT

6.

Sodium Bromide

(30% W/W)

solution)

- 830 MT

7. Sodium Formate - 3000 MT

8. Ammonium Sulfate - 1750 MT

9. Sodium Acetate - 547 MT

10. Cyanuric Acid - 500 MT

11. p-Phenol Sulfonic

acid - 500 MT

12. Sodium Sulphide - 300 MT

13. Sodium Bisulfite - 334 MT

14. Sodium Chloride - 384.4 MT

From

Process

Storage in

H.W.

storage

area


Transportation & Send to

authorized end users



15. Spent Carbon 28.3 2 MT

From

Process

Store in

H.W.

storage

area


Transportation & co-

processing in cement

industries or Send to

CHWIF of BEIL,

Ankleshwar for

incineration

16.

Discarded

Drums/Containers

33.1 85 Nos

From

Process

Store in

H.W.

storage

area

17. Discarded Bags

33.1 125 Nos

From

Process

Store in

H.W.

storage

area

18. Contaminated

HDPE/LDPE bags 33.1 85 Nos

From

Process

Store in

H.W.

storage

area

Collection, storage,

Decontamination,

Transportation and sold

to GPCB registered

vendor

Format for Appraisal – New: M/s. GUJARAT ORGANICS LTD...

Documents

Transcript of Format for Appraisal – New: M/s. GUJARAT ORGANICS LTD...