Forged Steel Fittings & Outlets - Paramount Supply · 2013. 2. 22. · 2,000 lb Threaded Forge...

CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456www.smithcooper.com

®

Forged Steel Fittings & Outlets2,000 lb, 3,000 lb, and 6,000 lb

Forged Steel Fittings and Outlets

• Manufacturing facilities are ISO 9001:2000 and ISO 14001 • ForgedSteelfittingmaterialconformstoASMESA105N,normalized• ForgedSteelfittingdimensionsconformtoASMEB16.11• NPTthreadsonForgedSteelfittingsconformtoASMEB1.20.1• Forged Steel unions conform to MSS-SP-83• ForgedSteeloutletfittingsconformtoMSS-SP-97• NPTthreadsonallfittingsconformtoASMEB1.20.1• Independentlabverificationthatfittingsmeetapplicablechemical&physicalproperties

Specifications

SCIQualityPlus• QualitycontrolinspectionsbothattheoverseasfactoryandourUSwarehouses• Companyengineeravailableatyourrequest• $10,000,000productliabilityinsurance• SCItrademarklogooneachfitting• SCI 5/50 guarantee• ProPakSystemmakesproductseasiertohandleandwarehouse• Orders shipped with in 24 hours• Faxconfirmationofeveryorder• Knowledgeable customer service personnel

SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com

SMITH-COOPER INTERNATIONAL (SCI) warrants to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of five years from the date of delivery to our initial purchaser.

Should any failure to conform to this warranty appear within five years after the date of the initial delivery to our initial purchaser, SCI will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with recognized engineering and piping practices and industry standards, correct such defects by suitable repair or replacement (which alternative shall be at the discretion of SCI) of product at SCI’s own expense upon return of the defective part to SCI.

In the event that SCI elects to replace the defective product, SCI shall pay up to $50 per defective product for total cost of replacement. In the event of multiple claims, such payment shall be no greater than $1,000 for each installation project.

This warranty applies only during normal use that meets the above referenced conditions of installation and operation and is absolutely void if the product has been damaged after purchase or if it has been misused, repaired, altered or modified in any manner whatsoever. SCI shall not warranty any of its products if any portion of the product including without limitation, any component, gasket, housing or bolt has been modified, altered, remanufactured or replaced in any manner by any customer, user of the product or third party.

Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of SCI to our initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort, or otherwise. It is the intention of SCI that no warranty of any kind, whether expressed or implied shall pass through our initial purchaser to any other person or corporation.

No returns will be allowed unless prior written permission of SCI is first obtained. Buyers shall be responsible for all costs of transportation as well as a restocking charge.

This warranty is exclusively for the benefit of the initial purchaser of this product from SCI and, except to the extent prohibited by applicable law, the foregoing warranty is in lieu of all other warranties, express or implied, including but not limited to warranties of fitness or merchantability.

LIMITATIONS OF LIABILITY: SCI shall not under any circumstances be liable for special or consequential damages such as, but not limited to damage to loss of other property or equipment, loss of profits or revenue, cost of capital, cost of purchased or replacement goods, claims of customers of our initial purchaser, any labor cost for repair or replacement of the product or damage caused by the product.

The remedies of our initial purchaser, and all others, set forth herein are exclusive, and the liability of SCI with respect to same shall not, except as expressly provided herein, exceed the price of the SCI products on which such liability is based.

WarrantyandLimitationsofLiability

2,000 lb Threaded Forged Steel FittingsPart Size Part Number

Dimensions (in) Weight(lb)

PackagingA B C Inner Master

90° Elbow 1/8 42E 2001 0.81 0.88 - 0.220 - 1501/4 42E 2002 0.81 0.88 - 0.176 - 1503/8 42E 2003 0.97 1.00 - 0.286 - 1001/2 42E 2004 1.12 1.31 - 0.551 - 803/4 42E 2006 1.31 1.50 - 0.771 - 501 42E 2010 1.50 1.81 - 1.168 - 30

1-1/4 42E 2012 1.75 2.19 - 1.807 - 201-1/2 42E 2014 2.00 2.44 - 2.336 - 15

2 42E 2020 2.38 2.97 - 3.747 - 82-1/2 42E 2024 3.00 3.62 - 6.921 - 4

3 42E 2030 3.38 4.31 - 10.00 - 24 42E 2040 4.19 5.75 - 22.503 - 1

Tee 1/8 42T 2001 0.81 0.88 - 0.295 - 1001/4 42T 2002 0.81 0.88 - 0.264 - 1003/8 42T 2003 0.97 1.00 - 0.374 - 801/2 42T 2004 1.12 1.31 - 0.683 - 503/4 42T 2006 1.31 1.50 - 0.947 - 351 42T 2010 1.50 1.81 - 1.520 - 20

1-1/4 42T 2012 1.75 2.19 - 2.358 - 151-1/2 42T 2014 2.00 2.44 - 3.063 - 10

2 42T 2020 2.38 2.97 - 4.760 - 62-1/2 42T 2024 3.00 3.62 - 9.058 - 3

3 42T 2030 3.38 4.31 - 13.48 - 24 42T 2040 4.19 5.75 - 32.48 - 1

Cross 1/8 42X 2001 0.81 0.88 - 0.440 - 601/4 42X 2002 0.81 0.88 - 0.464 - 603/8 42X 2003 0.97 1.00 - 0.485 - 601/2 42X 2004 1.12 1.31 - 0.881 - 403/4 42X 2006 1.31 1.50 - 1.124 - 301 42X 2010 1.50 1.81 - 1.697 - 20

1-1/4 42X 2012 1.75 2.19 - 2.446 - 101-1/2 42X 2014 2.00 2.44 - 3.571 - 6

2 42X 2020 2.38 2.97 - 5.775 - 42-1/2 42X 2024 3.00 3.62 - 10.491 - 3

45° Elbow 1/4 42F 2002 0.69 0.88 - 0.286 - 1503/8 42F 2003 0.75 1.00 - 0.220 - 1001/2 42F 2004 0.88 1.31 - 0.440 - 803/4 42F 2006 1.00 1.50 - 0.595 - 501 42F 2010 1.12 1.81 - 0.903 - 30

1-1/4 42F 2012 1.31 2.19 - 1.498 - 201-1/2 42F 2014 1.38 2.44 - 1.807 - 15

2 42F 2020 1.69 2.97 - 3.108 - 102-1/2 42F 2024 2.06 3.62 - 7.626 - 6

3 42F 2030 2.50 4.31 - 11.98 - 2

A

B

A

AB

A

B

A

B

SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com2,000 lb Threaded Forge Fittings conform to ASME SA105N, ASME B16.11, ASME B1.20.1, MSS-SP-83, MSS-SP-97 where applicable

3,000 lb Threaded Forged Steel Fittings

90° Elbow 1/8 42E 3001 0.81 0.88 - 0.220 - 1001/4 42E 3002 0.97 1.00 - 0.727 - 1003/8 42E 3003 1.12 1.31 - 0.639 - 801/2 42E 3004 1.31 1.50 - 0.903 - 503/4 42E 3006 1.50 1.81 - 1.586 - 251 42E 3010 1.75 2.19 - 2.270 - 20

1-1/4 42E 3012 2.00 2.44 - 3.129 - 151-1/2 42E 3014 2.38 2.97 - 4.870 - 6

2 42E 3020 2.50 3.31 - 5.444 - 52-1/2 42E 3024 3.25 4.00 - 13.202 - 2

3 42E 3030 3.75 4.75 - 19.572 - 14 42E 3040 4.50 6.00 - 32.729 - 1

45° Elbow 1/8 42F 3001 0.66 0.86 - 0.286 - 1001/4 42F 3002 0.75 1.00 - 0.264 - 1003/8 42F 3003 0.88 1.31 - 0.529 - 801/2 42F 3004 1.00 1.50 - 0.749 - 503/4 42F 3006 1.12 1.81 - 1.234 - 301 42F 3010 1.31 2.19 - 2.072 - 20

1-1/4 42F 3012 1.38 2.44 - 2.270 - 151-1/2 42F 3014 1.69 2.97 - 4.518 - 8

2 42F 3020 1.72 3.31 - 4.914 - 62-1/2 42F 3024 2.06 4.00 - 8.177 - 2

3 42F 3030 2.50 4.75 - 13.158 - 24 42F 3040 3.08 5.93 - 19.747 - 1

Tee 1/8 42T 3001 0.81 0.88 - 0.286 - 801/4 42T 3002 0.97 1.00 - 0.440 - 803/8 42T 3003 1.12 1.31 - 0.837 - 501/2 42T 3004 1.31 1.50 - 1.234 - 353/4 42T 3006 1.50 1.81 - 2.027 - 201 42T 3010 1.75 2.19 - 3.284 - 15

1-1/4 42T 3012 2.00 2.44 - 3.879 - 101-1/2 42T 3014 2.38 2.97 - 7.207 - 5

2 42T 3020 2.50 3.31 - 7.780 - 42-1/2 42T 3024 3.25 4.00 - 15.406 - 2

3 42T 3030 3.75 4.75 - 22.459 - 14 42T 3040 4.50 6.00 - 39.672 - 1

90° Street Elbow 1/8 42SE3001 1.25 0.97 1.00 0.200 - 2001/4 42SE3002 1.25 0.97 1.00 0.242 - 1503/8 42SE3003 1.50 1.12 1.31 0.484 - 801/2 42SE3004 1.69 1.31 1.50 0.683 - 503/4 42SE3006 1.94 1.50 1.81 1.168 - 301 42SE3010 2.31 1.75 2.19 2.248 - 20

1-1/4 42SE3012 2.69 2.00 2.44 2.491 - 151-1/2 42SE3014 2.81 2.38 2.97 4.430 - 8

2 42SE3020 3.38 2.50 3.31 6.413 - 5

A

B

A

B

C

A

AB

A

B


Part Size Part NumberDimensions (in) Weight

(lb)Packaging

A B C Inner Master

3,000 lb Threaded Forge Fittings conform to ASME SA105N, ASME B16.11, ASME B1.20.1, MSS-SP-83, MSS-SP-97 where applicable


Reducing Tee 3/4x1/2 42RT3006004 1.50 1.81 - 1.851 - 201x1/2 42RT3010004 1.75 2.19 - 2.997 - 151x3/4 42RT3010006 1.75 2.19 - 2.997 - 15

1-1/4x1/2 42RT3012004 2.00 2.44 - 3.636 - 101-1/4x3/4 42RT3012006 2.00 2.44 - 3.636 - 101-1/4x1 42RT3012010 2.00 2.44 - 3.637 - 10

1-1/2x1/2 42RT3014004 2.38 2.97 - 6.832 - 51-1/2x3/4 42RT3014006 2.38 2.97 - 6.832 - 51-1/2x1 42RT3014010 2.38 2.97 - 6.832 - 5

1-1/2x1-1/4 42RT3014012 2.38 2.97 - 6.832 - 52x1/2 42RT3020004 2.50 3.31 - 7.008 - 42x3/4 42RT3020006 2.50 3.31 - 7.008 - 42x1 42RT3020010 2.50 3.31 - 7.008 - 4

2x1-1/4 42RT3020012 2.50 3.31 - 7.008 - 42x1-1/2 42RT3020014 2.50 3.31 - 7.008 - 4

Cap 1/8 42C 3001 0.62 0.75 - 0.044 - 3001/4 42C 3002 0.75 1.00 - 0.088 - 3003/8 42C 3003 0.88 1.00 - 0.110 - 2501/2 42C 3004 1.12 1.25 - 0.242 - 1303/4 42C 3006 1.33 1.44 - 0.397 - 801 42C 3010 1.75 1.62 - 0.815 - 50

1-1/4 42C 3012 2.25 1.75 - 1.366 - 301-1/2 42C 3014 2.50 1.75 - 1.586 - 25

2 42C 3020 3.00 1.88 - 2.402 - 152-1/2 42C 3024 3.62 2.38 - 4.892 - 10

3 42C 3030 4.25 2.56 - 7.714 - 54 42C 3040 5.50 2.69 - 10.667 - 3

Union 1/8 42U 3001 1.66 1.48 - 0.617 - 701/4 42U 3002 1.66 1.48 - 0.617 - 703/8 42U 3003 1.83 1.66 - 0.529 - 701/2 42U 3004 2.00 1.93 - 0.749 - 503/4 42U 3006 2.31 2.38 - 1.057 - 351 42U 3010 2.42 2.78 - 1.697 - 20

1-1/4 42U 3012 2.86 3.35 - 2.270 - 141-1/2 42U 3014 3.00 3.70 - 3.592 - 10

2 42U 3020 3.50 4.42 - 5.356 - 52-1/2 42U 3024 4.25 5.22 - 8.000 - 3

3 42U 3030 4.42 6.15 - 11.615 - 2

Cross 1/8 42X 3001 0.81 0.88 - 0.42 - 401/4 42X 3002 0.97 1.00 - 0.52 - 403/8 42X 3003 1.12 1.31 - 0.98 - 401/2 42X 3004 1.31 1.50 - 1.48 - 303/4 42X 3006 1.50 1.81 - 2.52 - 201 42X 3010 1.75 2.19 - 3.58 - 12

1-1/4 42X 3012 2.00 2.44 - 4.10 - 61-1/2 42X 3014 2.38 2.97 - 6.55 - 4

2 42X 3020 2.50 3.31 - 8.12 - 42-1/2 42X 3024 3.25 4.00 - 39.826 - 2

3 42X 3030 3.75 4.75 - 22.040 - 24 42X 3040 4.50 6.00 - 48.800 - 1

A

B

A

B

A

B

A

B



(lb)Packaging

A B C Inner Master



Square Head Plug 1/8 42SP3001 0.63 0.28 - 0.022 - 8001/4 42SP3002 0.69 0.38 - 0.022 - 8003/8 42SP3003 0.81 0.44 - 0.066 - 5001/2 42SP3004 0.94 0.56 - 0.110 - 3003/4 42SP3006 1.06 0.62 - 0.198 - 2001 42SP3010 1.25 0.81 - 0.352 - 150

1-1/4 42SP3012 1.37 0.94 - 0.595 - 801-1/2 42SP3014 1.43 1.12 - 0.827 - 50

2 42SP3020 1.57 1.31 - 1.388 - 302-1/2 42SP3024 1.81 1.50 - 2.115 - 15

3 42SP3030 1.93 1.69 - 3.372 - 104 42SP3040 2.25 2.50 - 8.441 - 3

Full Coupling 1/8 42CP3001 0.62 1.25 - 0.110 - 2501/4 42CP3002 0.75 1.38 - 0.088 - 2503/8 42CP3003 0.88 1.50 - 0.132 - 2001/2 42CP3004 1.12 1.88 - 0.286 - 1003/4 42CP3006 1.33 2.00 - 0.418 - 701 42CP3010 1.75 2.38 - 0.991 - 35

1-1/4 42CP3012 2.25 2.62 - 1.785 - 201-1/2 42CP3014 2.50 3.12 - 2.358 - 15

2 42CP3020 3.00 3.38 - 3.086 - 102-1/2 42CP3024 3.62 3.62 - 5.047 - 5

3 42CP3030 4.25 4.25 - 7.449 - 34 42CP3040 5.50 4.75 - 13.841 - 2

Half Coupling 1/8 42HC3001 0.62 0.62 - 0.044 - 4001/4 42HC3002 0.75 0.69 - 0.044 - 8003/8 42HC3003 0.88 0.75 - 0.066 - 5001/2 42HC3004 1.12 0.94 - 0.132 - 2503/4 42HC3006 1.33 1.00 - 0.220 - 1501 42HC3010 1.75 1.17 - 0.506 - 80

1-1/4 42HC3012 2.25 1.31 - 0.749 - 351-1/2 42HC3014 2.50 1.56 - 1.190 - 30

2 42HC3020 3.00 1.67 - 1.542 - 202-1/2 42HC3024 3.62 1.81 - 2.490 - 12

3 42HC3030 4.25 2.12 - 3.702 - 64 42HC3040 5.50 2.37 - 6.854 - 4

Hex Head Plug 1/8 42HP3001 0.63 0.44 - 0.022 - 8001/4 42HP3002 0.69 0.62 - 0.066 - 8003/8 42HP3003 0.81 0.69 - 0.088 - 6001/2 42HP3004 0.87 0.88 - 0.154 - 2503/4 42HP3006 1.00 1.06 - 0.308 - 1501 42HP3010 1.13 1.38 - 0.484 - 100

1-1/4 42HP3012 1.37 1.75 - 0.969 - 351-1/2 42HP3014 1.43 2.00 - 1.300 - 25

2 42HP3020 1.57 2.50 - 2.270 - 202-1/2 42HP3024 1.81 3.00 - 3.967 - 8

3 42HP3030 1.93 3.50 - 5.730 - 64 42HP3040 2.25 4.62 - 11.461 - 4

Round Head Plug 1/2 42RP3004 1.75 0.84 - 0.264 - 1503/4 42RP3006 1.75 1.06 - 0.440 - 1001 42RP3010 2.00 1.31 - 0.749 - 80

1-1/4 42RP3012 2.00 1.69 - 1.212 - 501-1/2 42RP3014 2.00 1.91 - 1.741 - 30

2 42RP3020 2.50 2.38 - 3.239 - 20

B

A

A

B

B

A

B

A

A

B



(lb)Packaging

A B C Inner Master



Reducing Coupling 1/4x1/8 42RC3002001 0.75 1.38 - 0.110 - 2503/8x1/8 42RC3003001 0.88 1.50 - 0.154 - 2003/8x1/4 42RC3003002 0.88 1.50 - 0.132 - 2001/2x1/8 42RC3004001 1.12 1.88 - 0.286 - 1001/2x1/4 42RC3004002 1.12 1.88 - 0.418 - 1001/2x3/8 42RC3004003 1.12 1.88 - 0.286 - 1003/4x1/8 42RC3006001 1.33 2.00 - 0.418 - 703/4x1/4 42RC3006002 1.33 2.00 - 0.418 - 703/4x3/8 42RC3006003 1.33 2.00 - 0.418 - 703/4x1/2 42RC3006004 1.33 2.00 - 0.418 - 701x1/8 42RC3010001 1.75 2.38 - 0.859 - 351x1/4 42RC3010002 1.75 2.38 - 0.859 - 351x3/8 42RC3010003 1.75 2.38 - 0.859 - 351x1/2 42RC3010004 1.75 2.38 - 0.859 - 351x3/4 42RC3010006 1.75 2.38 - 0.859 - 35

1-1/4x1/8 42RC3012001 2.25 2.62 - 1.498 - 201-1/4x1/4 42RC3012002 2.25 2.62 - 1.498 - 201-1/4x3/8 42RC3012003 2.25 2.62 - 1.498 - 201-1/4x1/2 42RC3012004 2.25 2.62 - 1.498 - 201-1/4x3/4 42RC3012006 2.25 2.62 - 1.498 - 201-1/4x1 42RC3012010 2.25 2.62 - 1.498 - 20

1-1/2x1/8 42RC3014001 2.50 3.12 - 2.182 - 151-1/2x1/4 42RC3014002 2.50 3.12 - 2.182 - 151-1/2x3/8 42RC3014003 2.50 3.12 - 2.182 - 151-1/2x1/2 42RC3014004 2.50 3.12 - 2.182 - 151-1/2x3/4 42RC3014006 2.50 3.12 - 2.182 - 151-1/2x1 42RC3014010 2.50 3.12 - 2.887 - 15

1-1/2x1-1/4 42RC3014012 2.50 3.12 - 2.182 - 152x1/8 42RC3020001 3.00 3.38 - 3.019 - 102x1/4 42RC3020002 3.00 3.38 - 3.019 - 102x3/8 42RC3020003 3.00 3.38 - 3.019 - 102x1/2 42RC3020004 3.00 3.38 - 3.019 - 102x3/4 42RC3020006 3.00 3.38 - 3.019 - 102x1 42RC3020010 3.00 3.38 - 4.540 - 10

2x1-1/4 42RC3020012 3.00 3.38 - 3.306 - 102x1-1/2 42RC3020014 3.00 3.38 - 3.923 - 10

2-1/2x1/2 42RC3024004 3.62 3.62 - 5.730 - 52-1/2x3/4 42RC3024006 3.62 3.62 - 4.562 - 52-1/2x1 42RC3024010 3.62 3.62 - 4.562 - 5

2-1/2x1-1/4 42RC3024012 3.62 3.62 - 4.562 - 52-1/2x1-1/2 42RC3024014 3.62 3.62 - 4.562 - 5

2-1/2x2 42RC3024020 3.62 3.62 - 4.562 - 53x3/4 42RC3030006 4.25 4.25 - 6.788 - 33x1 42RC3030010 4.25 4.25 - 6.788 - 3

3x1-1/4 42RC3030012 4.25 4.25 - 6.788 - 33x1-1/2 42RC3030014 4.25 4.25 - 6.788 - 3

3x2 42RC3030020 4.25 4.25 - 6.788 - 33x2-1/2 42RC3030024 4.25 4.25 - 6.788 - 34x1-1/2 42RC3040014 5.50 4.75 - 11.98 - 2

4x2 42RC3040020 5.50 4.75 - 11.98 - 24x2-1/2 42RC3040024 5.50 4.75 - 11.98 - 2

4x3 42RC3040030 5.50 4.75 - 11.98 - -

A

B



(lb)Packaging

A B C Inner Master



Hex Bushing 1/4 x 1/8 42HB3002001 0.56 0.62 - 0.022 - 6003/8 x 1/8 42HB3003001 0.66 0.69 - 0.022 - 5003/8 x 1/4 42HB3003002 0.66 0.69 - 0.022 - 5001/2 x 1/8 42HB3004001 0.75 0.88 - 0.066 - 4001/2 x 1/4 42HB3004002 0.75 0.88 - 0.066 - 4001/2 x 3/8 42HB3004003 0.75 0.88 - 0.066 - 4003/4 x 1/8 42HB3006001 0.84 1.06 - 0.110 - 2003/4 x 1/4 42HB3006002 0.84 1.06 - 0.110 - 2003/4 x 3/8 42HB3006003 0.84 1.06 - 0.110 - 2003/4 x 1/2 42HB3006004 0.84 1.06 - 0.110 - 2001 x 1/8 42HB3010001 1.00 1.38 - 0.198 - 1001 x 1/4 42HB3010002 1.00 1.38 - 0.198 - 1001 x 3/8 42HB3010003 1.00 1.38 - 0.198 - 1001 x 1/2 42HB3010004 1.00 1.38 - 0.198 - 1001 x 3/4 42HB3010006 1.00 1.38 - 0.198 - 100

1-1/4x1/8 42HB3012001 1.09 1.75 - 0.837 - 701-1/4x1/4 42HB3012002 1.09 1.75 - 0.396 - 701-1/4x3/8 42HB3012003 1.09 1.75 - 0.396 - 701-1/4x1/2 42HB3012004 1.09 1.75 - 0.551 - 701-1/4x3/4 42HB3012006 1.09 1.75 - 0.551 - 701-1/4x1 42HB3012010 1.09 1.75 - 0.551 - 70

1-1/2x1/8 42HB3014001 1.12 2.00 - 1.366 - 501-1/2x1/4 42HB3014002 1.12 2.00 - 1.366 - 501-1/2x3/8 42HB3014003 1.12 2.00 - 1.366 - 501-1/2x1/2 42HB3014004 1.12 2.00 - 1.013 - 501-1/2x3/4 42HB3014006 1.12 2.00 - 0.881 - 501-1/2x1 42HB3014010 1.12 2.00 - 0.749 - 50

1-1/2x1-1/4 42HB3014012 1.12 2.00 - 0.749 - 502x1/4 42HB3020002 1.22 2.50 - 0.837 - 252x3/8 42HB3020003 1.22 2.50 - 1.851 - 252x1/2 42HB3020004 1.22 2.50 - 1.763 - 252x3/4 42HB3020006 1.22 2.50 - 1.697 - 252x1 42HB3020010 1.22 2.50 - 1.542 - 25

2x1-1/4 42HB3020012 1.22 2.50 - 0.991 - 252x1-1/2 42HB3020014 1.22 2.50 - 0.991 - 25

2-1/2x1/2 42HB3024004 1.44 3.00 - 1.190 - 152-1/2x3/4 42HB3024006 1.44 3.00 - 1.190 - 152-1/2x1 42HB3024010 1.44 3.00 - 1.190 - 15

2-1/2x1-1/4 42HB3024012 1.44 3.00 - 1.190 - 152-1/2x1-1/2 42HB3024014 1.44 3.00 - 1.322 - 15

2-1/2x2 42HB3024020 1.44 3.00 - 1.322 - 153x1/4 42HB3030002 1.53 3.50 - 4.738 - 103x1/2 42HB3030004 1.53 3.50 - 5.377 - 103x3/4 42HB3030006 1.53 3.50 - 2.556 - 103x1 42HB3030010 1.53 3.50 - 2.556 - 10

3x1-1/4 42HB3030012 1.53 3.50 - 2.556 - 103x1-1/2 42HB3030014 1.53 3.50 - 2.556 - 10

3x2 42HB3030020 1.53 3.50 - 2.556 - 103x2-1/2 42HB3030024 1.53 3.50 - 2.556 - 10

4x1 42HB3040010 1.75 4.62 - 7.052 - 54x1-1/4 42HB3040012 1.75 4.62 - 7.052 - 54x1-1/2 42HB3040014 1.75 4.62 - 7.052 - 5

4x2 42HB3040020 1.75 4.62 - 7.052 - 54x2-1/2 42HB3040024 1.75 4.62 - 7.052 - 5

4x3 42HB3040030 1.75 4.62 - 4.628 - 5

B

A


(lb)Packaging

A B C Inner Master

SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com3,000 lb Threaded Forge Fittings conform to ASME SA105N, ASME B16.11, ASME B1.20.1, MSS-SP-83, MSS-SP-97 where applicable

3,000 lb Socket Weld Forged Steel Fittings

90° Elbow 1/8 52E 3001 0.82 0.68 - 0.198 - 1501/4 52E 3002 0.82 0.82 - 0.309 - 1503/8 52E 3003 0.91 0.98 - 0.264 - 1001/2 52E 3004 1.00 1.20 - 0.484 - 803/4 52E 3006 1.25 1.41 - 0.727 - 501 52E 3010 1.38 1.74 - 1.168 - 30

1-1/4 52E 3012 1.56 2.10 - 1.851 - 201-1/2 52E 3014 1.75 2.36 - 2.380 - 15

2 52E 3020 2.12 2.89 - 3.702 - 82-1/2 52E 3024 2.24 3.54 - 7.052 - 4

3 52E 3030 2.87 4.21 - 11.858 - 24 52E 3040 3.37 5.30 - 24.13 - 1

Cross 1/4 52X 3002 0.82 0.82 - 1.168 - 603/8 52X 3003 0.91 0.98 - 1.013 - 601/2 52X 3004 1.00 1.20 - 0.859 - 403/4 52X 3006 1.25 1.41 - 1.057 - 301 52X 3010 1.38 1.74 - 1.653 - 20

1-1/4 52X 3012 1.56 2.10 - 2.622 - 101-1/2 52X 3014 1.75 2.36 - 3.548 - 6

2 52X 3020 2.12 2.89 - 5.179 - 42-1/2 52X 3024 2.24 3.54 - 13.356 - 3

3 52X 3030 2.87 4.21 - 13.500 - 24 52X 3040 3.37 5.30 - 39.000 - 1

45°Elbow 1/8 52F 3001 0.69 0.68 - 0.352 - 1501/4 52F 3002 0.69 0.82 - 0.308 - 1503/8 52F 3003 0.69 0.98 - 0.264 - 1001/2 52F 3004 0.82 1.20 - 0.440 - 803/4 52F 3006 1.00 1.41 - 0.617 - 501 52F 3010 1.06 1.74 - 0.925 - 30

1-1/4 52F 3012 1.19 2.10 - 1.520 - 201-1/2 52F 3014 1.31 2.36 - 1.763 - 15

2 52F 3020 1.62 2.89 - 2.975 - 102-1/2 52F 3024 1.74 3.54 - 5.576 - 6

3 52F 3030 1.87 4.21 - 11.240 - 24 52F 3040 2.37 5.30 - 20.73 - 1

Tee 1/8 52T 3001 0.82 0.68 - 0.286 - 1001/4 52T 3002 0.82 0.82 - 0.198 - 1003/8 52T 3003 0.91 0.98 - 0.330 - 801/2 52T 3004 1.00 1.20 - 0.639 - 503/4 52T 3006 1.25 1.41 - 0.925 - 351 52T 3010 1.38 1.74 - 1.432 - 20

1-1/4 52T 3012 1.56 2.10 - 2.292 - 151-1/2 52T 3014 1.75 2.36 - 2.975 - 10

2 52T 3020 2.12 2.89 - 4.496 - 62-1/2 52T 3024 2.24 3.54 - 8.772 - 3

3 52T 3030 2.87 4.21 - 13.00 - 24 52T 3040 3.37 5.30 - 39.47 - 1

A

B

A

AB

A

B

A

B



(lb)Packaging

A B C Inner Master

3,000 lb Socket Weld Forge Fittings conform to ASME SA105N, ASME B16.11, ASME B1.20.1, MSS-SP-83, MSS-SP-97 where applicable

Coupling 1/8 52CP3001 1.01 0.68 - 0.088 - 3501/4 52CP3002 1.01 0.82 - 0.110 - 3503/8 52CP3003 1.01 0.98 - 0.154 - 2501/2 52CP3004 1.14 1.20 - 0.286 - 1203/4 52CP3006 1.38 1.41 - 0.374 - 801 52CP3010 1.50 1.74 - 0.639 - 50

1-1/4 52CP3012 1.50 2.10 - 0.991 - 301-1/2 52CP3014 1.50 2.36 - 1.300 - 25

2 52CP3020 2.00 2.89 - 1.895 - 152-1/2 52CP3024 2.00 3.54 - 3.085 - 10

3 52CP3030 2.00 4.21 - 3.923 - 64 52CP3040 2.25 5.30 - 6.281 - 4

Cap 1/4 52C 3002 0.63 1.00 - 0.088 - 3003/8 52C 3003 0.69 1.06 - 0.154 - 2501/2 52C 3004 0.81 1.31 - 0.220 - 1303/4 52C 3006 0.81 1.50 - 0.352 - 801 52C 3010 0.94 1.88 - 0.551 - 50

1-1/4 52C 3012 0.94 2.25 - 0.991 - 301-1/2 52C 3014 1.00 2.50 - 1.300 - 25

2 52C 3020 1.19 3.00 - 2.115 - 152-1/2 52C 3024 1.31 3.63 - 3.151 - 10

3 52C 3030 1.50 4.25 - 6.039 - 54 52C 3040 1.75 5.50 - 9.345 - 3

Union 1/8 52U 3001 1.66 1.48 - 0.617 - 701/4 52U 3002 1.66 1.48 - 0.617 - 703/8 52U 3003 1.83 1.66 - 0.551 - 701/2 52U 3004 2.00 1.93 - 1.080 - 503/4 52U 3006 2.31 2.38 - 1.080 - 351 52U 3010 2.42 2.78 - 1.675 - 20

1-1/4 52U 3012 2.86 3.35 - 2.424 - 141-1/2 52U 3014 3.00 3.70 - 3.548 - 10

2 52U 3020 3.50 4.42 - 4.760 - 52-1/2 52U 3024 4.25 5.22 - 7.714 - 3

3 52U 3030 4.42 6.15 - 11.35 - 2

Half Coupling 1/2 52HC3004 1.26 1.20 - 0.286 - 1503/4 52HC3006 1.44 1.41 - 0.462 - 801 52HC3010 1.62 1.74 - 0.661 - 50

1-1/4 52HC3012 1.69 2.10 - 0.749 - 301-1/2 52HC3014 1.75 2.36 - 1.454 - 25

2 52HC3020 2.24 2.89 - 2.402 - 152-1/2 52HC3024 2.31 3.54 - 3.592 - 10

3 52HC3030 2.37 4.21 - 4.628 - 64 52HC3040 2.63 5.30 - 8.176 - 4

BA

A

B

A

B

A

B




(lb)Packaging

A B C Inner Master


Reducing Coupling 1/2x1/4 52RC3004002 1.14 1.23 - 0.286 - 1201/2x3/8 52RC3004003 1.14 1.23 - 0.286 - 1203/4x1/8 52RC3006001 1.38 1.46 - 0.418 - 803/4x1/4 52RC3006002 1.38 1.46 - 0.418 - 803/4x3/8 52RC3006003 1.38 1.46 - 0.418 - 803/4x1/2 52RC3006004 1.38 1.46 - 0.418 - 801x1/4 52RC3010002 1.50 1.78 - 0.595 - 501x3/8 52RC3010003 1.50 1.78 - 0.595 - 501x1/2 52RC3010004 1.50 1.78 - 0.595 - 501x3/4 52RC3010006 1.50 1.78 - 0.595 - 50

1-1/4x1/2 52RC3012004 1.50 2.16 - 1.080 - 301-1/4x3/4 52RC3012006 1.50 2.16 - 1.146 - 301-1/4x1 52RC3012010 1.50 2.16 - 1.080 - 30

1-1/2x1/4 52RC3014002 1.50 2.42 - 1.300 - 251-1/2x3/8 52RC3014003 1.50 2.42 - 2.093 - 251-1/2x1/2 52RC3014004 1.50 2.42 - 1.300 - 251-1/2x3/4 52RC3014006 1.50 2.42 - 1.300 - 251-1/2x1 52RC3014010 1.50 2.42 - 1.697 - 25

1-1/2x1-1/4 52RC3014012 1.50 2.42 - 1.300 - 252x1/4 52RC3020002 2.00 2.96 - 2.644 - 152x3/8 52RC3020003 2.00 2.96 - 2.204 - 152x1/2 52RC3020004 2.00 2.96 - 2.644 - 152x3/4 52RC3020006 2.00 2.96 - 2.358 - 152x1 52RC3020010 2.00 2.96 - 2.137 - 15

2x1-1/4 52RC3020012 2.00 2.96 - 2.137 - 152x1-1/2 52RC3020014 2.00 2.96 - 2.644 - 15

2-1/2x1/2 52RC3024004 2.00 3.70 - 4.200 - 102-1/2x3/4 52RC3024006 2.00 3.70 - 3.526 - 102-1/2x1 52RC3024010 2.00 3.70 - 3.129 - 10

2-1/2x1-1/4 52RC3024012 2.00 3.70 - 3.129 - 102-1/2x1-1/2 52RC3024014 2.00 3.70 - 3.129 - 10

2-1/2x2 52RC3024020 2.00 3.70 - 3.129 - 103x1 52RC3030010 2.00 4.30 - 4.188 - 6

3x1-1/4 52RC3030012 2.00 4.30 - 4.408 - 63x1-1/2 52RC3030014 2.00 4.30 - 4.144 - 6

3x2 52RC3030020 2.00 4.30 - 4.144 - 63x2-1/2 52RC3030024 2.00 4.30 - 4.144 - 64x1-1/2 52RC3040014 2.25 5.39 - 6.00 - 4

4x2 52RC3040020 2.25 5.39 - 5.90 - 44x2-1/2 52RC3040024 2.25 5.39 - 5.80 - 4

4x3 52RC3040030 2.25 5.39 - 5.70 - 4

A

B




(lb)Packaging

A B C Inner Master



Socket Weld Insert 1/2x1/4 52IN3004002 1.25 1.23 - 0.264 - 1501/2x3/8 52IN3004003 1.25 1.23 - 0.264 - 1503/4x1/4 52IN3006002 1.06 1.46 - 0.396 - 1003/4x3/8 52IN3006003 1.06 1.46 - 0.396 - 1003/4x1/2 52IN3006004 1.34 1.46 - 0.396 - 1001x1/4 52IN3010002 1.12 1.78 - 0.551 - 801x3/8 52IN3010003 1.12 1.78 - 0.551 - 801x1/2 52IN3010004 1.12 1.78 - 0.308 - 801x3/4 52IN3010006 1.52 1.78 - 0.551 - 80

1-1/4x1/4 52IN3012002 1.25 2.16 - 0.991 - 701-1/4x3/8 52IN3012003 1.25 2.16 - 0.991 - 701-1/4x1/2 52IN3012004 1.25 2.16 - 0.991 - 701-1/4x3/4 52IN3012006 1.25 2.16 - 0.991 - 701-1/4x1 52IN3012010 1.58 2.16 - 0.991 - 70

1-1/2x3/8 52IN3014003 1.31 2.42 - 1.234 - 501-1/2x1/2 52IN3014004 1.31 2.42 - 0.903 - 501-1/2x3/4 52IN3014006 1.31 2.42 - 1.234 - 501-1/2x1 52IN3014010 1.31 2.42 - 0.617 - 50

1-1/2x1-1/4 52IN3014012 1.70 2.42 - 1.234 - 502x1/2 52IN3020004 1.50 2.96 - 1.983 - 252x3/4 52IN3020006 1.50 2.96 - 1.983 - 252x1 52IN3020010 1.50 2.96 - 1.983 - 25

2x1-1/4 52IN3020012 1.50 2.96 - 1.983 - 252x1-1/2 52IN3020014 1.81 2.96 - 1.983 - 25

2-1/2x1/2 52IN3024004 2.12 3.70 - 2.644 - 122-1/2x3/4 52IN3024006 2.12 3.70 - 2.644 - 122-1/2x1 52IN3024010 2.12 3.70 - 2.644 - 12

2-1/2x1-1/4 52IN3024012 2.12 3.70 - 2.644 - 122-1/2x1-1/2 52IN3024014 2.12 3.70 - 2.644 - 12

2-1/2x2 52IN3024020 2.50 3.70 - 2.644 - 123x1 52IN3030010 1.87 4.30 - 3.967 - 10

3x1-1/4 52IN3030012 1.87 4.30 - 3.967 - 103x1-1/2 52IN3030014 1.87 4.30 - 4.143 - 10

3x2 52IN3030020 1.87 4.30 - 3.967 - 104x2-1/2 52IN3040024 2.21 4.30 - .501 - 4

A

B



(lb)Packaging

A B C Inner Master



90° Elbow 1/2 42E 6004 1.50 1.81 - 1.763 - 253/4 42E 6006 1.75 2.19 - 2.887 - 201 42E 6010 2.00 2.44 - 3.548 - 12

1-1/4 42E 6012 2.38 2.97 - 6.457 - 51-1/2 42E 6014 2.50 3.31 - 8.353 - 4

2 42E 6020 3.25 4.00 - 16.111 - 23 42E 6030 4.13 5.69 - 36.211 - -

45° Elbow 1/2 42F 6004 1.12 1.81 - 1.388 - 253/4 42F 6006 1..31 2.19 - 2.358 - 201 42F 6010 1.38 2.44 - 2.799 - 12

1-1/4 42F 6012 1.69 2.97 - 4.937 - 51-1/2 42F 6014 1.72 3.31 - 5.598 - 4

2 42F 6020 2.06 4.00 - 9.632 - 22-1/2 42F 6024 2.50 4.72 - 15.450 - -

3 42F 6030 3.08 5.69 - 31.208 - -

Tee 3/8 42T 6003 1.29 1.48 - 1.388 - 351/2 42T 6004 1.50 1.81 - 2.159 - 203/4 42T 6006 1.75 2.19 - 3.636 - 121 42T 6010 2.00 2.44 - 4.782 - 10

1-1/4 42T 6012 2.38 2.97 - 7.638 - 21-1/2 42T 6014 2.50 3.31 - 10.380 - 2

2 42T 6020 3.25 4.00 - 17.368 - 22-1/2 42T 6024 3.71 4.72 - 28.894 - 1

3 42T 6030 4.13 5.70 - 49.590 - 1

90° Street Elbow 1/2 42SE6004 1.87 1.38 1.75 1.500 - 203/4 42SE6006 2.25 1.75 2.25 2.542 - 151 42SE6010 2.62 2.00 2.62 3.256 - 10

1-1/4 42SE6012 2.87 2.12 2.75 6.511 - 41-1/2 42SE6014 3.31 2.50 3.31 7.252 - 4

A

B

A

B

C

A

AB

A

B



(lb)Packaging

A B C Inner Master



Cross 1/2 42X 6004 1.50 1.81 - 2.292 - 203/4 42X 6006 1.75 2.19 - 3.614 - 121 42X 6010 2.00 2.44 - 3.857 - 6

1-1/4 42X 6012 2.38 2.97 - 8.816 - 41-1/2 42X 6014 2.50 3.31 - 11.552 - 2

2 42X 6020 3.25 4.00 - 19.836 - 12-1/2 42X 6024 3.71 4.72 - 33.000 - -

Union 1/4 42U 6002 1.82 1.69 - 0.561 - 403/8 42U 6003 2.00 1.94 - 0.755 - 401/2 42U 6004 2.31 2.38 - 1.258 - 253/4 42U 6006 2.44 2.78 - 1.752 - 201 42U 6010 2.88 3.36 - 3.010 - 10

1-1/4 42U 6012 3.00 3.72 - 3.757 - 81-1/2 42U 6014 3.50 4.42 - 4.893 - 6

2 42U 6020 4.12 5.23 - 8.375 - 2

Cap 1/4 42C 6002 1.00 1.06 - 0.132 - 2003/8 42C 6003 1.25 1.06 - 0.198 - 1501/2 42C 6004 1.50 1.31 - 0.573 - 803/4 42C 6006 1.75 1.50 - 0.881 - 501 42C 6010 2.25 1.69 - 1.564 - 35

1-1/4 42C 6012 2.50 1.81 - 1.300 - 201-1/2 42C 6014 3.00 1.88 - 1.697 - 15

2 42C 6020 3.62 2.00 - 4.914 - 8

A

B

A

B

A

B



(lb)Packaging

A B C Inner Master


6,000 lb. Threaded Forged Steel Fittings

Coupling 1/8 42CP6001 0.88 1.25 - 0.176 - 2001/4 42CP6002 1.00 1.38 - 0.286 - 2003/8 42CP6003 1.25 1.50 - 0.286 - 1001/2 42CP6004 1.50 1.88 - 0.749 - 803/4 42CP6006 1.75 2.00 - 1.102 - 351 42CP6010 2.25 2.38 - 1.917 - 20

1-1/4 42CP6012 2.50 2.62 - 2.402 - 151-1/2 42CP6014 3.00 3.12 - 4.275 - 10

2 42CP6020 3.62 3.38 - 6.325 - 5

Reducing Coupling 1-1/2x1/2 42RC6014004 3.00 3.12 - 2.644 - 101-1/2x3/4 42RC6014006 3.00 3.12 - 4.121 - 101-1/2x1 42RC6014010 3.00 3.12 - 2.182 - 102x1/2 42RC6020004 3.62 3.38 - 9.256 - 52x1 42RC6020010 3.62 3.38 - 7.493 - 5

2x1-1/2 42RC6020014 3.62 3.38 - 7.493 - 5

Half Coupling 1/8 42HC6001 0.88 0.62 - 0.080 - 1001/4 42HC6002 1.00 0.69 - 0.106 - 1003/8 42HC6003 1.25 0.75 - 0.175 - 751/2 42HC6004 1.50 0.94 - 0.352 - 503/4 42HC6006 1.75 1.00 - 0.442 - 501 42HC6010 2.25 1.19 - 0.991 - 25

1-1/4 42HC6012 2.50 1.31 - 1.160 - 101-1/2 42HC6014 3.00 1.56 - 2.116 - 10

2 42HC6020 3.62 1.69 - 3.88 - 10

B

A

A

B

A

B



(lb)Packaging

A B C Inner Master



90° Elbow 1/2 52E 6004 1.13 1.33 - 0.881 - 503/4 52E 6006 1.38 1.62 - 1.609 - 251 52E 6010 1.56 1.96 - 2.587 - 20

1-1/4 52E 6012 1.75 2.31 - 3.261 - 151-1/2 52E 6014 2.00 2.62 - 6.149 - 6

2 52E 6020 2.24 3.27 - 7.229 - 5

45° Elbow 1/2 52F 6004 0.88 1.33 - 0.793 - 503/4 52F 6006 1.06 1.62 - 1.256 - 301 52F 6010 1.19 1.96 - 2.027 - 20

1-1/4 52F 6012 1.31 2.31 - 2.446 - 151-1/2 52F 6014 1.50 2.62 - 4.430 - 8

2 52F 6020 1.74 3.27 - 4.606 - 6

Tee 1/2 52T 6004 1.13 1.33 - 1.234 - 353/4 52T 6006 1.38 1.62 - 2.072 - 201 52T 6010 1.56 1.96 - 4.782 - 15

1-1/4 52T 6012 1.75 2.31 - 4.253 - 101-1/2 52T 6014 2.00 2.62 - 7.427 - 5

2 52T 6020 2.24 3.27 - 8.772 - 4

Cross 1/2 52X 6004 1.13 1.33 - 1.697 - 303/4 52X 6006 1.38 1.62 - 2.314 - 201 52X 6010 1.56 1.96 - 3.912 - 12

1-1/4 52X 6012 1.75 2.31 - 5.162 - 61-1/2 52X 6014 2.00 2.62 - 8.397 - 4

2 52X 6020 2.24 3.27 - 15.869 - 2

A

B

A

AB

A

B

A

B



(lb)Packaging

A B C Inner Master



Cap 1/2 52C 6004 0.81 1.33 - 0.352 - 803/4 52C 6006 0.81 1.62 - 0.506 - 501 52C 6010 0.94 1.96 - 0.793 - 35

1-1/4 52C 6012 0.94 2.31 - 1.410 - 251-1/2 52C 6014 1.00 2.62 - 2.071 - 15

2 52C 6020 1.19 3.27 - 3.615 - 8

Union 1/2 52U 6004 2.25 2.38 - 1.036 - 303/4 52U 6006 2.44 2.75 - 1.036 - 201 52U 6010 2.88 3.25 - 1.543 - 10

1-1/4 52U 6012 3.00 3.50 - 6.590 - 81-1/2 52U 6014 3.38 4.25 - 4.893 - 6

2 52U 6020 4.06 5.12 - 4.893 - 2

Coupling 1/2 42U 6004 1.14 1.33 - 0.529 - 303/4 42U 6006 1.38 1.62 - 0.595 - 201 42U 6010 1.50 1.96 - 0.970 - 10

1-1/4 42U 6012 1.50 2.31 - 1.322 - 81-1/2 42U 6014 1.50 2.62 - 2.446 - 6

2 42U 6020 2.00 3.27 - 3.571 - 2

BA

A

B



(lb)Packaging

A B C Inner Master


A

B

Threaded Outlet 1/2 x 3/4 thru 36 43TO3004006360 1.00 - - 0.180 - 1503/4 x 1 thru 1-1/4 43TO3006010012 1.06 - - 0.250 - 1003/4 x 1-1/2 thru 36 43TO3006014360 1.06 - - 0.250 - 1001 x 1-1/4 thru 2-1/2 43TO3010012024 1.31 - - 0.500 - 50

1 x 3 thru 36 43TO3010030360 1.31 - - 0.500 - 501-1/4 x 1 thru 1/2 43TO3012010004 1.31 - - 0.800 - 40

1-1/4 x 2 thru 3-1/2 43TO3012020034 1.31 - - 0.800 - 401-1/4 x 4 thru 36 43TO3012040360 1.31 - - 0.800 - 40

1-1/2 x 2 thru 2-1/2 43TO3014020024 1.38 - - 1.000 - 251-1/2 x 3 thru 5 43TO3014030050 1.38 - - 1.000 - 25

1-1/2 x 6 thru 36 43TO3014060360 1.38 - - 1.000 - 252 x 2-1/2 thru 3-1/2 43TO3020024034 1.50 - - 1.750 - 10

2 x 4 thru 6 43TO3020040060 1.50 - - 1.750 - 152 x 8 thru 36 43TO3020080360 1.50 - - 1.750 - 15

2-1/2 x 3 thru 3-1/2 43TO3024030034 1.81 - - 2.500 - 102-1/2 x 4 thru 5 43TO3024040050 1.81 - - 2.500 - 102-1/2 x 6 thru 8 43TO3024060080 1.81 - - 2.500 - 10

2-1/2 x 10 thru 36 43TO3024100360 1.81 - - 2.500 - 103 x 3-1/2 thru 4 43TO3030034040 2.00 - - 4.000 - 6

3 x 5 thru 6 43TO3030050060 2.00 - - 4.000 - 63 x 8 thru 14 43TO3030080140 2.00 - - 4.000 - 63 x 16 thru 36 43TO3030160360 2.00 - - 4.000 - 64 x 5 thru 6 43TO3040050060 2.25 - - 6.300 - 14 x 8 thru 10 43TO3040080100 2.25 - - 6.300 - 14 x 12 thru 20 43TO3040120200 2.25 - - 6.300 - 14 x 22 thru 36 43TO3040220360 2.25 - - 6.300 - 1

Forged Steel Outlets

Socket Weld Outlet 1/2 x 3/4 thru 36 43SO3004006360 1.01 - - 0.180 - 1503/4 x 1 thru 1-1/4 43SO3006010012 1.13 - - 0.250 - 1003/4 x 1-1/2 thru 36 43SO3006014360 1.13 - - 0.250 1001 x 1-1/4 thru 2-1/2 43SO3010012024 1.38 - - 0.500 - 50

1 x 3 thru 36 43SO3010030360 1.38 - - 0.500 - 501-1/4 x 1 thru 1/2 43SO3012010004 1.38 - - 0.800 - 40

1-1/4 x 2 thru 3-1/2 43SO3012020034 1.38 - - 0.800 - 401-1/4 x 4 thru 36 43SO3012040360 1.38 - - 0.800 - 40

1-1/2 x 2 thru 2-1/2 43SO3014020024 1.44 - - 1.000 - 251-1/2 x 3 thru 5 43SO3014030050 1.44 - - 1.000 - 25

1-1/2 x 6 thru 36 43SO3014060360 1.44 - - 1.000 - 252 x 2-1/2 thru 3-1/2 43SO3020024034 1.56 - - 1.750 - 10

2 x 4 thru 6 43SO3020040060 1.56 - - 1.750 - 152 x 8 thru 36 43SO3020080360 1.56 - - 1.750 - 15

2-1/2 x 3 thru 3-1/2 43SO3024030034 1.62 - - 2.500 - 102-1/2 x 4 thru 5 43SO3024040050 1.62 - - 2.500 - 102-1/2 x 6 thru 8 43SO3024060080 1.62 - - 2.500 - 10

2-1/2 x 10 thru 36 43SO3024100360 1.62 - - 2.500 - 103 x 3-1/2 thru 4 43SO3030034040 1.81 - - 4.000 - 6

3 x 5 thru 6 43SO3030050060 1.81 - - 4.000 - 63 x 8 thru 14 43SO3030080140 1.81 - - 4.000 - 63 x 16 thru 36 43SO3030160360 1.81 - - 4.000 - 64 x 5 thru 6 43SO3040050060 1.89 - - 6.300 - 14 x 8 thru 10 43SO3040080100 1.89 - - 6.300 - 14 x 12 thru 20 43SO3040120200 1.89 - - 6.300 - 14 x 22 thru 36 43SO3040220360 1.89 - - 6.300 - 1


A

A


(lb)Packaging

A B C Inner Master

Forge Steel Outlet Fittings conform to ASME SA105N, ASME B16.11, ASME B1.20.1, MSS-SP-83, MSS-SP-97 where applicable

Butt Weld Outlet 1/2 x 1 43WO3004010 0.75 0.545 - 0.374 - 1501/2 x 1-1/4 thru 36 43WO3004012360 0.75 0.545 - 0.374 - 150

3/4 x 1 thru 2 43WO3006010020 0.88 0.743 - 0.352 - 1003/4 x 2-1/2 thru 36 43WO3006024360 0.88 0.743 - 0.352 - 1001 x 1-1/4 thru 1-1/2 43WO3010012014 1.06 0.957 - 0.617 - 50

1 x 2 thru 36 43WO3010020360 1.06 0.957 - 0.617 - 501-1/4 x 1-1/2 thru 2 43WO3012014020 1.25 1.280 - 0.903 - 401-1/4 x 2-1/2 thru 6 43WO3012024060 1.25 1.280 - 0.903 - 40

1-1/4 x 8 thru 36 43WO3012080360 1.25 1.280 - 0.925 - 401-1/2 x 2 thru 3-1/2 43WO3014020034 1.31 1.502 - 1.410 - 25

1-1/2 x 4 thru 36 43WO3014040360 1.31 1.502 - 1.410 - 252 x 2-1/2 thru 3 43WO3020024030 1.50 1.938 - 2.300 - 152 x 3-1/2 thru 6 43WO3020034060 1.50 1.938 - 2.300 - 15

2 x 8 thru 36 43WO3020080360 1.50 1.938 - 2.300 - 152-1/2 x 5 thru 10 43WO3024050100 1.62 2.322 - 2.999 - 102-1/2 x 12 thru 36 43WO3024120360 1.62 2.322 - 2.333 - 10

3 x 5 thru 6 43WO3030050060 1.75 2.900 - 4.369 - 63 x 8 thru 14 43WO3030080140 1.75 2.900 - 4.369 - 63 x 16 thru 36 43WO3030160360 1.75 2.900 - 4.369 - 64 x 8 thru 10 43WO3040080100 2.00 3.826 - 7.118 - 14 x 12 thru 20 43WO3040120200 2.00 3.826 - 7.118 - 14 x 22 thru 36 43WO3040220360 2.00 3.826 - 7..118 - 1

Forged Steel Outlets



(lb)Packaging

A B C Inner Master

AB

Forge Steel Outlet Fittings conform to ASME SA105N, ASME B16.11, ASME B1.20.1, MSS-SP-83, MSS-SP-97 where applicable

All Butt Weld Outlets Have a Schedule 80 Bore

Malleable IronPipe Fittings

1/8” – 8” Black&GalvanizedUL/FM150#&300#

2867 VAIL AVENUE,COMMERCE,CA 90040 TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456www.smithcooper.com

COOPLOKTM GroovedUL/FMCouplings–Flexible&Rigid

MechanicalTees,Fittings&FlangedAdapters

Ductile IronThreaded Fittings1/2” – 2-1/2” Class 300

UL/FM@500PSI

Merchant SteelCouplings & Fittings

1/8” – 12” STD-XHFull,Half,APIStyle

ValvesCarbonSteel–Stainless–Brass

1/4” – 4”

Cast IronThreaded Fittings1/2” – 2-1/2” Class 125

UL/FM@300PSI

Forged Steel Fittings & Outlets1/8”–4”Threaded&S/W

2000#,3000#,6000#

Bronze Fittings & FlangesBrass Nipples & Pipe

1/8” – 6” 125#

COOPLET® Weld Outlets and Adapter NipplesUL/FM300#WeldedOutlet

Threaded1/2”to4”,Grooved1-1/4”to6”

Cast Iron FlangedFittings & Flanges

FlangedFittings1”to30”,125#&250#CastIron125#,250#,Flanges

Blind,Threaded,ReducingThreaded

Butterfly & Gate Valves Nipples1/8”–8”Black&Galvanized

Welded – SeamlessSchedule40,80,andXXH,BrassSchedule40

Rev. 07/09

®

Flanged,MechanicalJoint,Threaded,Push-On,Check

Lug&Wafer

Forged Steel Fittings & Outlets - Paramount Supply · 2013. 2. 22. · 2,000 lb Threaded Forge...

Documents

Transcript of Forged Steel Fittings & Outlets - Paramount Supply · 2013. 2. 22. · 2,000 lb Threaded Forge...