Forged Fittings - Superlok Asiasuperlok-asia.com/images/fittings/Forged_Fitting.pdf · Rating...

Forged FittingsHigh Technology Valve & Fitting Series

Forged steel socket Welding fittings 6 ~ 13

Forged steel threaded fittings 14 ~ 20

Forged steel outlet fittings 21 ~ 23

Standard threads specifications 24 ~ 25

Comparison of ASTM specifications and similar standards 26

ASTM chemical composition 27

Wall thickness of welded and Seamless pipe 28 ~ 29

4

FORGED STEEL SOCKET WELDING & THREADED FITTINGS1. PRESSURE RATINGSThese fittings shall be designated as pressure class 2000,3000 and 6000 fittings for threading and pressure class 3000,6000 and 9000 for socket-welding. This designation identifies the fittings with their ratings as shown as follows, Table 1.

Table 1 : Correlation of Fittings Class With Schedule Number of Wall Designation of Pipe for Calculation of Ratings

Table 2 : Nominal wall thickness of Schedule 160 and Double Extra Strong Pipe.

Non-shock Working Pressure in Pounds per Square InchTable 3 : Pressure/Temperature Ratings

This table is not intended to restrict the use of pipe of thinner or thicker wall with fittings. Pipe actually used may be thinner or thicker innominal wall than that shown in Table 1. When thinner is used its strength may govern the rating. When thicker pipe is used (e.g., formechanical strength) the strength of the fitting governs the rating.

FORGED FITTINGS

5

FORGED FITTINGS

2. SIZE IDENTIFICATIONThe size of a fitting is identified by the nominal pipe size. For reducing fittings, the size of the largest run opening is to begiven first, followed by the size of the opening opposite of the same run. The branch size of a Tee is given last. Where thecase is a Cross, the largest side-outlet is thirdly given, then the opening opposite

3. THREADSUnless otherwise specified in inquiry, all threaded fittings are supplied with NPT threads (ANSI B2.1 American Standard.Taper Pipe Thread) for reference, other available threads are :

ISO / R7, Pipe Threads for Gas List Tubes and Screwed Fittings where Pressure-tight Joints are made on the threads.(BS 2.1 & JIS B0203 PT Thread).API 5B, Line Pipe Threads.KS B0222 Taper Pipe Threads.

4. BORE DIAMETER OF FITTINGSBore Diameter of fitting are manufactured for conforming with KS. JIS ANSI or MSS dimension.

6

FORGED FITTINGS

FORGED STEEL SOCKET WELDING FITTINGS

90 ELBOW 3000# 6000# 9000#

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

9000# (mm) ANSI B16.11

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

9000# (mm) ANSI B16.11

45 ELBOW3000# 6000# 9000#

7

FORGED FITTINGS


TEE3000# 6000# 9000#

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

9000# (mm) ANSI B16.11

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

9000# (mm) ANSI B16.11

CROSS3000# 6000# 9000#

8

FORGED FITTINGS


FULL COUPLING3000# 6000# 9000#

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

9000# (mm) ANSI B16.11

HALF COUPLING3000# 6000# 9000#

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

9000# (mm) ANSI B16.11

9

FORGED FITTINGS


CAP3000# 6000#

BOSS3000# 6000#

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

3000# / 6000# (mm) ANSI B16.11

10

FORGED FITTINGS


UNION3000#

MSS SP-83 (mm)

11

FORGED FITTINGS


UNION3000# 6000#

UNION (O-RING TYPE)3000#

STANDARD (mm)

Rating Pressure : 210kg/cm2

Temperature : 120 C MAX (mm)

12

FORGED FITTINGS


REDUCER INSERT3000# 6000#

MSS SP-79 (mm)

13

FORGED FITTINGS


REDUCER INSERT3000# 6000#

(1) At the option of the manufacturer Type2 reducers may be furnished in Type1 configuration.

Laying Length A Sizes 3/8" thru 3/4" 1.52mmSizes 1" thru 2" 2.03mmSizes 2-1/2" thru 3/4" 0.13mm

Socket Dia. B Sizes 2" thru 3/4" 0.13mmSizes 2-1/2" thru 4" 0.20mm

TOLERANCESBore D Sizes 3/8" thru 2" 0.76mm

Sizes 2-1/2" thru 4" 1.52mm

Shank Dia. SD Sizes 1/4" thru 1-1/2" 0.25mmSizes 2" thru 3" 0.51mmSizes 4" 0.76mm

(mm)

(mm)

MSS SP-79

FORGED FITTINGS

FORGED STEEL THREADED FITTINGS

14

90 ELBOW 2000# 3000# 6000#

2000# (mm) ANSI B16.11

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

2000# (mm) ANSI B16.11

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

45 ELBOW2000# 3000# 6000#

15

FORGED FITTINGS


2000# (mm) ANSI B16.11

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

2000# (mm) ANSI B16.11

3000# (mm) ANSI B16.11

6000# (mm) ANSI B16.11

TEE2000# 3000# 6000#

CROSS2000# 3000# 6000#

FORGED FITTINGS

16


FULL COUPLING3000# 6000#

HALF COUPLING3000# 6000#

CAP3000# 6000#

3000# (mm) ANSI B16.11 6000# (mm) ANSI B16.11

3000# (mm) ANSI B16.11 6000# (mm) ANSI B16.11

3000# (mm) ANSI B16.11 6000# (mm) ANSI B16.11

17

FORGED FITTINGS


HEX HEAD PLUG HEX HEAD BUSHING

SQUARE HEAD PLUG ROUND HEAD PLUG

ANSI B16.11 ANSI B16.11

ANSI B16.11 ANSI B16.11

18

FORGED FITTINGS


UNION3000#

UNION3000# 6000#

UNION (O-RING TYPE)

Rating Pressure: 210k/cm2

Temperature: 120 C Max.

MSS SP-83

STANDARD

3000#

(mm)

(mm)

(mm)

19

FORGED FITTINGS


NIPPLE3000# 6000#

REDUCING NIPPLE3000# 6000#

ANSI B16.11 (mm)

(mm)ANSI B16.11

* H: Size 2 and smaller are Hexagonal bodies, 3 is octagonal body

20

FORGED FITTINGS

FORGED STEEL THREADED FITTINGSBOSS3000# 6000#

SWAGED NIPPLE

TBE: Threaded both end BLE/TSE: Beveled large end-Threaded small endPBE: Plane both end BLE/PSE: Beveled large end-Plane small endPLE/TSE: Plane large end-Thread small end TLE/PSE: Threaded large end-Plane small end

BS 3799

21

FORGED FITTINGS

FORGED STEEL OUTLET FITTINGS

NIPPLE OUTLET3000#

FLANGED-END OUTLET3000#

(mm)

(mm)

22

FORGED FITTINGS

* Applicable Run Pipe Sizes are from Out-let size to 36"* Standard Weight Fittings are the same as Schedule 40 Fittings Until 10" and Extra Strong Fittings are the Same as Schedule 80 Until 8".* Pipe Schedule Numbers and Weight Designations are in Accordance With ANSI B36.10


WELDOLETSSTD (SCH 40), XS(SCH 80)

23

FORGED FITTINGS


SOCKOLETS3000# 6000#

THREDOLETS3000# 6000#

* Applicable Run Pipe Sizes are from Out-let size to 36"* For the 3000# and 6000# Sockolets and Thredolets, Inside Bore, Thread, Socket Bore and socket Depth Dimensions are According to ANSI B16.11* Pipe Schedule Numbers and Weight Designations are in Accordance With ANSI B36.10

* Applicable Run Pipe Sizes are from Out-let size to 36"* For the 3000# and 6000# Sockolets and Thredolets, Inside Bore, Thread, Socket Bore and socket Depth Dimensions are According to ANSI B16.11* Pipe Schedule Numbers and Weight Designations are in Accordance With ANSI B36.10

24

FORGED FITTINGS

STANDARD THREADS SPECIFICATIONS

KS BO222 & JIS BO203 PIPE THREADS

BASIC THREAD DATA (mm)

FORGED FITTINGS

25

STANDARD THREADS SPECIFICATIONS

ANSI B2.1 TAPER PIPE THREADS.(EXCEPT DRYSEAL)

BASIC THREAD DATA

THREAD HEIGHT DIMENSIONS

(inch)

26

FORGED FITTINGS

COMPARISON OF ASTM SPECIFICATIONS AND SIMILAR STANDARDS

27

FORGED FITTINGS

ASTM CHEMICAL COMPOSITION

28

FORGED FITTINGS

WALL THICKNESS OF WELDED AND SEAMLESS PIPE

Unit : mm

29

FORGED FITTINGS

WALL THICKNESS OF WELDED AND SEAMLESS PIPE

Unit : mm

PRODUCTS

30

APPLICATIONSHIGH PRESSURE INSTRUMENT LINES

SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 10000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -22 °F(-30°C) TO 265 °F(130°C)

APPLICATIONSMULTI-PURPOSE, PNEUMATIC SYSTEM


APPLICATIONSINSTRUMENT AIR LINE, REFINERY PILOT PLANT

SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 2500 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: 50 °F(10°C) TO 150 °F(65°C)

APPLICATIONSINSTRUMENTATION, HIGH PRESSURE AND TEMPERATURE, CRYOGENIC SERVICE

SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 9000 psig @100 F(38 C)OPERATING TEMPERATURE RANGE: -325 F(-198 C) TO 1200 F(648 C)

APPLICATIONSHYDRAULIC, PNEUMATIC, LUBRICATION

SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 100~630 barg @100 °F(38°C)OPERATING TEMPERATURE RANGE: 800 °F(427°C)

BALL VALVE 120 SERIES

BITE TYPE TUBE FITTINGS (DIN 2353)

SUPERLOK TUBE FITTINGS



APPLICATIONSINSTRUMENTATION, GENERAL SERVICE


INSTRUMENT THREAD FITTINGS

APPLICATIONSINSTRUMENT AIR LINE, PILOT PLANT


PLUG VALVES

APPLICATIONSPRESSURE & DIFFERENTIAL PRESSURE INSTRUMENTATION


MANIFOLD VALVES

PRODUCTS

31

APPLICATIONSINSTRUMENT LINE


APPLICATIONSINSTRUMENT LINE


APPLICATIONSINSTRUMENT AIR LINE, OIL & GAS PRODUCTION


APPLICATIONSGENERAL SERVICE, INSTRUMENT ISOLATION


APPLICATIONSHIGH TEMPERATURE AND PRESSURE


SWING-OUT BALL VALVES

UNION BONNET NEEDLE VALVES

INTEGRAL BONNET NEEDLE VALVES

TOGGLE VALVES

QUICK CONNECTS

APPLICATIONSINSTRUMENT LINES


CHECK VALVES

APPLICATIONSPRIMARY ISOLATION, SAMPLING, CHEMICAL INJECTION

SPECIFICATIONSMAXIMUM OPERATING PRESSURE: CLASS2500 (6000 psig) @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 400 °F(204°C) WITH PEEK SEAT

DOUBLE BLOCK & BLEED VALVES

APPLICATIONSVACUUM LINES

VACUUM CLAMP

BMT CFF-1 (07.01.10)

Valve Series

Ball ValvesIntegral Bonnet Needle ValvesUnion Bonnet Needle ValvesCheck ValvesHigh Pressure Check ValvesHigh Pressure Needle ValvesPlug ValvesManifold ValvesVacuum ClampRegulatorsFlexible HosesDouble Block & Bleed ValvesSwing-Out Ball ValvesToggle ValvesBleed & Purge ValvesQuick ConnectorsHigh Pressure Ball ValvesHydraulic Ball ValvesTrunnion Ball ValvesRising Plug ValvesRelief ValvesCryogenic Needle ValvesCryogenic Ball Valves

Fitting Series

Tube FittingsThread FittingsForged FittingsBite Type Tube Fittings (DIN2353)Bite Type Tube Fittings (JIS B2351)37 Flared Tube Fittings (SAE J514)O-Ring Face Seal FittingsHose Connectors & Push-On Hose Fittings

ElectronicsMCPD(Molded Case Power Distributor)

21-1, Bukjeong-dong Yangsan-si Gyeongsangnam-do KoreaTel. 82-55-783-1000 Fax. [email protected]

경상남도 양산시 북정동 21-1

전화 : 055-783-1000 팩스 : [email protected]

Forged Fittings - Superlok Asiasuperlok-asia.com/images/fittings/Forged_Fitting.pdf · Rating...

Documents

Transcript of Forged Fittings - Superlok Asiasuperlok-asia.com/images/fittings/Forged_Fitting.pdf · Rating...