Ford Fiesta ST - Blow Off Valve Manual - Boomba Racing
1
FORD FIESTA ST BLOW OFF VALVE ADAPTOR 1 Remove plastic vacuum hose from rubber adaptor on the top of valve cover (leave rubber adaptor in place). 1 When lifting the car always use stands to secure the car. 2 Remove the right front wheel. 3 Disconnect the blow of valve wire harness. 4 Remove the factory blow of valve. 5 Wipe out oil residue from the bottom of the turbo housing. 6 Boomba Blow Off Valve Adaptor ready for installation. 7 Install the Boomba Blow Off Valve Adaptor with provided screws. Connect the wire harness. 8 Reinstall the right front wheel. MATERIALS REQUIRED None TOOLS REQUIRED Set of car stands M5 long allen wrench
Transcript of Ford Fiesta ST - Blow Off Valve Manual - Boomba Racing
FORD FIESTA ST
BLOW OFF VALVE ADAPTOR
1
Remove plastic vacuum hose from rubberadaptor on the top of valve cover (leaverubber adaptor in place).1
When lifting the caralways use stands tosecure the car.
2Remove the right front wheel.
3
Disconnect the blow of valve wireharness.
4
Remove the factory blow of valve.
5
Wipe out oil residue from the bottom ofthe turbo housing.
6
Boomba Blow Off Valve Adaptor ready forinstallation.
7
Install the Boomba Blow Off ValveAdaptor with provided screws. Connectthe wire harness. 8
Reinstall the right front wheel.
MATERIALS REQUIRED
None
TOOLS REQUIRED
Set of car standsM5 long allen wrench