For S Tools And Accessories Moulders Planers … put their training ... Glue-Line Rip Saw Blades ......

CATALOG NO. 1000

NE

W - E

ASY F

IND

TA

BS

Tooling For Shapers, Moulders, Planers, Tenoners, saws and Routers

We Build Into Every Tool We Sell The Know How and Precision to Get Your Job Done Right

Quality Woodworking Tools And Accessories

Since 1926

More Tools

More Solutions

To Place An Order Call: 1-800-SCHMIDT 800-724-6438 www.cggschmidt.com

YOU HAVE A TEAM OF PROBLEM SOLVERS AT SCHMIDTThe people you talk to are experienced pros in the custom woodworking tool industry who

can put their training and knowledge to work for you.Count on any one of the Schmidt team to tackle your production andengineering problems and meet your special manufacturing needs.

When it comes to experience, we’re in a class by ourselves.

•When you call for service you talk to the seasoned experts in charge, dedicated Schmidt Sales Engineers with over 100 years total experience.

•We have expert skill and under-standing in the engineering, design and manufacturing of custom tools.

•We also know the machine you put the tools on: shaper, moulder, double-end tenoner, jointer, planer and router.

We know woodworking tools inside out, and that sets our

service apart.•Total service: Schmidt will recommend the proper tool type, tip, cutting angle, etc., for the proper machine to do your job efficiently and economically.

•For fast turnaround, send your order or picture of the shape you need via fax machine or e-mail.

•We specialize in custom work, so we

excel at understanding and servicing your unique woodworking problem.•We can manufacture tools for most woodworking machines to meet unusual requirements.

•Schmidt offers the most versatile design and manufacture of wing cutters, shaper knives and corrugated back knives in the business.

•We offer S-Alloy, carbide-tipped and solid steel tools to work on any type of wood.

Schmidt stands at the leading edge of innovation and high

performance.•More combinations of standard corrugated back heads and knives than anyone else in the industry

•We were first to adapt S-Alloy for woodworking tools back in the early 1960s. Other companies have followed our lead.

WARRANTY: All Charles G.G. Schmidt & Co. tools are warranted against defect in workmanship and material for 90 days. Any product found to be defective may be returned with prior written approval. If found defective in our analysis, the product will be repaired or replaced, at our discretion.PRICES: Prices and specifications are subject to change without notice.

CANCELLATION: Standard orders may be cancelled without charge before shipping. Special orders may be cancelled but there will be a cancellation charge based on the status of your order and expenses incurred by the company at the time of cancellation. Standard items may be returned subject to a 15% restocking charge.TERMS: Cash, COD, Credit Card, or Net 30 days upon credit

approval. Minimum order $30.00.FREIGHT & SHIPPING: All orders are shipped FOB Montvale, NJ. All

CONDITIONS OF SALE

shipping and handling charges are added to the invoice. Ownership of products will pass to buyer at the time the goods are delivered to the freight carrier.

MasterCardDISCOVER

Rich Albertson

Stock Sales

Joe De CotiisOperations

Manager

Bruce GriffithMid-Atlantic Sales(302) 731-3128

Jay Oliva Stock &

Custom Sales

Bruce LambertNew England Sales

(978) 501-1794

It all adds up. Top quality Products. In-depth service and experience. Technical

innovation. It’s what makes Schmidt a leader in the

industry. It’s what makes the Schmidt difference!

The finest expression of Schmidt quality is in the high performance

of Schmidt tools.•We make our tools to precision tolerances to insure extreme accuracy.

•We use the latest technology in CNC equipment for greater precision than ever before.

•We check our tools with high powered optical comparators where requirements demand it to identify and correct small imperfections.

We Give Expert Technical AssistanceTo Help You Get the Right Tool

To Fit Every Need and Specification

INTR

OD

UC

TIO

N

Rick PaulPresident

Millie McTernanStock & Custom

Sales

http://www.cggschmidt.com

1Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565

CUSTOM TOOLS 2What’s available and how to order

SHAPER CUTTERS 3-5Groovers • Tongue & Groove • Lock-Mitre Flooring Sets • Finger Joints • Staggered Tooth Fence Post Cutters • Panel Raising Cutters Stile & Rail Cutters for Kitchen Cabinets, Interior & Exterior DoorsWINDOW SASH CUTTERS 6Window Sash Cutter Sets • Check Rail CuttersACCESSORIES 7-8Bearings • Rub Collars • Bushings • Spacer Sets • Plastic Shims Custom Shims • Sprayway Products • Space Balls • Honing Cones Sharpening Stones • ManualsMANUALS 9Educational Manuals and Books for the Professional WoodworkerTHIN KNIVES FOR PLANERS & JOINTERS 10-11Carbide Tipped • Solid Carbide • T-1 High Speed • Smooth Back Bars • Planer Jig • Jointer Jig • Magnetic Knife Setting GaugesBEVELED EDGE SHAPER STEEL & KNIVES 12M2 High Speed & XLW Bars • Straight Knives in Steel and Carbide TippedREPLACEMENT KNIVES 13Tersa, Terminus & Centrolock Replacement KnivesSCHURE • LOCK 14SCHure • Lock Knife System • Carbide or S-Alloy Tipped Corrugated Back KnivesCORRUGATED, WILLIAMS & HUSSEY KNIFE STOCK 15T-1 • XLW HP • M2 & M3 High Speed Steel • Schmidt Super Steel Filler Bars • Williams & Hussey Knives and Bar Stock • Straight Knives for PlaningSAW BLADES 16-17Panel Saw Blades • Scoring Saw Blades • Miter & Chop Saw Blades • Cut Off and Trim Saws Blades • Dado Sets Rip Saw Blades Glue-Line Rip Saw Blades • Double Faced Laminate Saw Blades Combination Saw Blades • Solid Surface Saw BladesGRINDING ROOM SUPPLIES 18Grinding Wheels • Template Material • Grinding Coolant • Moulder Bed Lube • Diamond Dressers • Template MaterialKNIFE PROFILES 19-26Crowns • Beds • Coves • Quarter Rounds • Stools • Base Shoes • Flat Astragals • Base Mouldings/Caps • Brick Moulding • Glass Beads • Nosing • Panel Mouldings • Chair Rails & Casings

KNIFE PROFILES Cont. 19-26Shingle Panel Mouldings • Picture Mouldings • Beading & Fluting Base Mouldings • Stops Bead & Bullnose • Eighth Round • Hand Rails • Panel & Flooring • Angle & Backout • Victorian CasingCUTTER HEADS 27-28The Junior Line • Williams & Hussey Shaper Head • Standard Moulder & Shaper Heads; 2, 4, 6 Knife Hydro-Lock • Straight Bore Open-end Sleeves Coping Discs • Grease Guns & GreaseINNOVATORS 29Multiprofile Corrugated Back Panel Raising Cutter • Standard Profiles for the InnovatorROSETTES 30Multiprofile Rosette Cutters • Standard Profiles for Rosette CuttersTENONER TOOLING 31Powermatic 2-A Replacement Knives & Heads • Custom Tenon and Cope Heads • Spur KnivesHOLLOW MORTISING CHISELS & BITS • PROFILING HEADS 32Hollow Mortising Chisels & Bits • Manuals • Profiling Heads INSERT HEADS 33-36SCHure-Cut • Surfacing Heads • Tenon Heads • Rebating and Grooving Cutters • Stack able Surfacing Heads • Adjustable Angle Cutter • Dedicated Inset Heads • Insert Flooring CuttersINSERTS 37Replacement Solid Carbide Inserts. Indexible & ProfiledCUTTERS 38-39Panel Raising • Insert Stile and Rail • Panel Crafter Profiling Fixture ROUTER TOOLING & BORING BITS 40-42Corrugated Back Router Head • Router Bit Adapters • V Groove/Chamfer Bit • Boring Bits • Solid Carbide Spiral Router Bits Diamond Tipped Router Bits & T-Slot Cutters • Custom Router Bits TOOL HOLDERS 43Tool Holders for CNC Routers • Arbors • Pull StudsCOLLETS 44ER Precision Collets • ER Coated NutsBAND SAW BLADES 45Carbon Wood Production & General Purpose Band Saw BladesMACHINES 46-48Rosette Machine • Williams & Hussey Moulder / Planer • Arc Master • Feed Master • Steff Power FeedersLARRY'S CLAMP, DRAWER JIG, DOOR JIG 49Larry's Clamp, Drawer and Door Jigs

Dear Valued Customer, Welcome to the new 2010/2011 catalog from Charles G.G. Schmidt & Company. This catalog, along with our expert technical staff, will allow you to select the best possible tooling system available for your application. During our eighty four years of service to the woodworking industry, we have been the consistent source for the highest quality state-of-the-art tooling, as well as friendly, knowledgeable technical help for all types of woodworking machines, both new and old. As we enter our eighty fifth year, we hold an uncompromising commitment to stay on the “cutting edge" of the industry, while providing you with the best customer service available. This includes staying on top of new materials and techniques, continually improving our own manufacturing processes, while at the same time maintaining our tradition as your problem solving partner. Thank you for considering us for your tooling requirements. President

IND

EX

Index of Pages

Ver 68

2 To Place An Order Call: 1-800-SCHMIDT 800-724-6438 www.cggschmidt.com

A SCHMIDT SPECIALTYCustom cutting tools have always been a specialty of Schmidt so we excel at understanding and servicing your unique woodworking problem. Whether you work with a shaper, moulder, saw, CNC, router, planer or double end tenoner, we can provide the best tools to get your job done right. The chart below describes the range of tools which are available for various woodworking machines. Also shown is the range of cutting tips which we can provide for each tool, depending on your application.

TYPES OF TOOLS AND THE TYPE OF MACHINES ON WHICH THEY CAN BE USED

DIAMOND• Can help reduce machine downtime

drastically.• Retains sharpness 100 to 300 times longer

than carbide.• Ideal for long runs where maintaining a

precise profile is required.• Cuts smoother than Carbide.• Must be used on power-fed operations.• Recommended for all types of wood and

is excellent on abrasive materials such as MDF or plywood.

S-ALLOY • Recommended for most solid hard and

soft woods.• Holds a cutting edge longer, cuts smoother,

feeds with less resistance.• Can be sharpened to finer edge than carbide.• Especially effective on cross-grain cutting.• Can be honed for longer wear between

sharpening.• Is sharpened with aluminum oxide or

borazon only.

TUNGSTEN CARBIDE• Recommended for hardboard, plywood,

chipboard, masonite and any other glue-bonded materials.• Must be used for highly abrasive materials.

• C-2 carbide used for most applications. Better grades available when requirements demand it.

• C-3 carbide, standard on our panel raising cutters.• C-4 carbide, standard on our insert tools.

TOOL STEELS• Can be ground to a super sharp cutting edge

for soft and hardwood applications.• Not recommended for cutting more abrasive

materials such as particle board, masonite, etc.• Hardened to Rockwell C60-62.• M2 & M3 High Speed Steels, the industry

standard for long life and easy grinding.• XLW HP (Speed Steel) for Xtra Long Wear. - has similar characteristics to M-2. - provides good wear life.• T1 High Speed Steel Rich in Tungsten, this

Alloy Steel has proven itself when it comes to long runs and grinding ease. Available in

corrugated back knives, thin knives and Terminus knives only.

• Schmidt Super Steel A high quality steel specially treated to produce an extraordinarily

hard surface that won’t chip, peel or flake. 50% longer run times in solid woods, than M2 HSS. See page 15.

MATERIALS USED IN TIPS OF CUSTOM CUTTING TOOLS

Diameter, thickness, bore (spindle) size and number of wings

Specify S-Alloy orTungsten Carbide tips

Indicate type of wood being cut

State whether cut is with or across the grain

Include dimensioned drawing or accurate sample of wood being cutIdentify type of machine and whether spindle rotation is clockwise or counterclockwisePoint out which surface of wood is in contact with shaper table

1234567

HOW TO ORDER:Please include the following information when ordering:

SHAPER�TABLE

DEPTH�OF CUT

COUNTERCLOCKWISE�ROTATION

KNIFE�WIDTH

FAC

E�C

OM

ING

WOOD

Schmidt can make a variety of custom cutter heads, all designed to meet your special needs.Router

Bits

WingCutters

Insert Tooling

CorrugatedBack

KnivesLockedge

ShaperKnives

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

Routers Shapers Moulders Tenoners Planers

Diamond

S-Alloy

Tungsten Carbide

Tool Steel

CU

STO

M T

OO

LS


3Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565 3

For hardwood, plywood, chipboard, other glue-bonded or highly abrasive materials, Tungsten Carbide tipped cutting tools are recommended.

GROOVERSAn excellent grooving cutter for all types of material Standard bore 1-1/4".

Bushings available for smaller bore sizes, see page 8. For larger bores, our boring charge applies.

See CAT NO. WC898

1/4"

1/4"

TONGUE & GROOVE CUTTER SET 4" x 1-1/4" bore 3-wing 4 pc. carbide tipped cutter set to produce 1/4" x 1/4" square tongue & groove on material up to 1-1/8" thick.

• One 3-wing groover (4" dia.. x 1/4" thick)

• Two 3-wing straight cutters (3-1/2" dia. x 1/2" thick)

• One spacer collar (Not shown)

To cut the groove joint, replace the spacer collar with the 3-wing groover.

To cut the tongue joint, use the two 3-wing cutters sepa-rated by the spacer collar.

WC200CAT. NO.

WC201CAT. NO.

3/16"

P A R T 23/4"-1 1/8"

45°

P A R T 1

1/4"

SINGLE TONGUE & GROOVELOCK-MITRE CUTTERS4-3/4" x 1-1/4" bore 3-wing 3 pc. carbidetipped cutter set to produce singletongue & groove lock-mitre corners.

FOR PART 1: Positionshaper cutter to cut allpanels as shown in sketch.

FOR PART 2:Use one halfof part 1 panels,place on saw table and cut offtongue with 1/4" groover as shown.This piece becomes Part 2.See below for groovers or see our new 1/4" insert groover on page 35.

WC202CAT. NO.

P A R T 2

P A R T 1

3/4"-7/8"45°

3/16"

3/16"

DOUBLE TONGUE AND GROOVELOCK-MITRECUTTERS5" x 1-1/4" bore 3-wing 3 pc. carbidetipped cutter set to produce doubletongue & groove lock-mitre corners.

FOR PART 1: Position cutter onshaper to cut tongue and groovein center of wood panel whenwood is lying flat. Cut half ofyour panels this way.

FOR PART 2:Position cutter to cut tongue andgroove in center of wood panel when wood is standing on end.

WC240XLCAT. NO.

3/4"1/4"

1/32"FLOORING

CUTTER SET4-1/2" x 1-1/4" bore 3-wing carbide tipped 5 pc. cutter set to pro-duce tongue & groove flooring.2 pc. tongue cutter allows you to hold dimension for the life of the tool. Fits shapers and XL moulders.

3/8"

3/32" 3/16"

7/8"

WC203BCAT. NO.

FINGER JOINT CUTTER

3 -1/2" x 1-1/4" bore 3 wing carbide tipped cut-ter for finger joints onmaterial 3/4" to 7/8" thick.

CARBIDE TIPPED

These cutters are used in the fence industry to manu-facture pickets and other shaped wooden parts.

CARBIDE TIPPED STAGGERED TOOTH STRAIGHT CUTTERSWith straight or true spiral cutting edges

* For use on fence machines. Includes 1/4" X 1/8" keyway in bore.Call for custom size pricing.

CAT. NO.WC416S

Straight SpiralSIZE

* 2-1/2"dia. x 6" cel x 1" boreCAT. NO.WC416ST

KERF1/4"3/8"1/2"

4" DIAMETER 6" DIAMETER 8" DIAMETER3 WING

CAT. NO.WC141WC142WC143

6 WINGCAT. NO.WC161WC162WC163

6 WINGCAT. NO.WC181WC182WC183

SHA

PER C

UTTER

SSHAPER CUTTERS

NEW!

4 To Place An Order Call: 1-800-SCHMIDT 800-724-6438 www.cggschmidt.com4

S-ALLOY AND CARBIDE TIPPED S-Alloy is ideal for cutting most solid hard and soft woods. Compared with other tips, S-Alloy holds a cutting edge longer, cuts smoother, and feeds with less resistance. It’s the best cutting tip on the market for cutting solid wood stiles, rails and raised panels. Our C-3 Micrograin Carbide Tipped panel raising cutters are excellent for cutting man made materials such as MDF, Medex, solid surface and fire treated materials. They also work well in very hard natural woods such as maple and teak.

PANEL RAISING CUTTERS• Cutters made for counterclockwise rotation with wood face side up. All

are 6" diameter w/ 1-1/4" bore, 3-wings & 10° shear face.• Consult factory for prices on other

shapes and designs.• Use bearing AC111, 2-1/2" x 1-1/4"

for pattern shaping with 3/8" tongue length.

• For bushings to other bore sizes, see accessories page 8.

Insert style Panel Raising Cutters and Stile and Rail sets on pages 38-39

STILE & RAIL CUTTER SETSFOR KITCHEN CABINETS• Cutters made for

counterclockwise or clockwise rotation with wood face up or face down. Please specify when ordering.

• All are 4" Diameter x 1-1/4" bore, 3 wing.

• Use bearing AC113 3" x 1-1/4" bore for pattern

shaping.

3/8"1-3/8"

1/2"

1/4" raise above tongue

WC21214S-ALLOY

WC21114CARBIDE

5/8"

3/8"1-3/8"


WC21238S-ALLOY

WC21138CARBIDE

3/8"1-3/8"

3/4"


WC212S-ALLOY

WC211CARBIDE

3/8"

5/8"

1-3/8"1/2"


WC21438S-ALLOY

WC21338CARBIDE

3/8"

5°3/4"

1-3/8"

3/4"R

1/2" raise above tongueWC214

S-ALLOYWC213

CARBIDE

3/4"1/4"

9/32"R

Stiles & Rails for 3/4" to 1-1/8". Set consists of 5 cutters & 1 spacer. Does not trim tongue.

WC215S-ALLOY

1/4"3/4"

WC215EES-ALLOY

1/4"

7/8"

3/8"R

WC216S-ALLOY

1/4"

7/8"

3/8"R

WC216EES-ALLOY

1/4"3/4"

WC218S-ALLOY

Same as WC215 except for Eased Edges

Stiles and Rails from 7/8" to 1-1/4". Set consists of 5 cutters & 1 spacer. Does not trim tongue.

Same as WC216 except for Eased Edges

Stiles and Rails for 3/4" to 1-1/8". Set consists of 5 cutters and 1 spacer. Does not trim tongue.

WC215CCARBIDE

WC215EECCARBIDE

WC216CCARBIDE

WC216EECCARBIDE

WC218CCARBIDE

SHA

PER

CU

TTER

S FOR CABINET DOORS



S-ALLOY AND CARBIDE TIPPED STILE AND RAIL CUTTER SETS FOR INTERIOR AND EXTERIOR DOORS• All sets 4" diameter x 1-1/4" bore, 3 wing. • Use bearing AC113 3" x 1-1/4" bore for pattern shaping.• Sets consists of 6 cutters - trims tongue to length. Hollow mortising chisels and bits available. See page 32

WC220CCARBIDE

3/8"R

1/4" 1-3/4"

WC220S-ALLOY

OVOLOPattern for 1-3/4" thick Panel Doors.

OVOLO Pattern for 1-3/8" thick Panel Doors.

WC222CCARBIDE

5/16" R

1-3/8" 1/4"

•For bushings to other bore sizes see accessories on page 7.

WC222S-ALLOY

BEAD & COVE Pattern for 1-3/4" thick Panel Doors

WC221CCARBIDE

1-3/4"1/4"

1/4"R

WC221S-ALLOY

BEVELPattern for1-3/4" thick Panel Doors

WC224CCARBIDE

1-3/4"1/4"

WC224S-ALLOY

BEAD & COVE Pattern for1-3/8" thick Panel Doors

7/32"

1-3/8"

7/32"

1/4"

CARBIDEWC223C

WC223S-ALLOY

WC225S-ALLOY

GLASS PANEL CUTTERS for All Schmidt Door SetsUse these cutters with any of the sets listed above to produce an inlaid glass panel door. This set consists of (2) 1-1/4" wide cutters to be used with 1 stile cutter and 1 rail cutter to make a joint as shown. The rabbet depth produced is 1/2". Rabbeting cutters only, does not include profile cutters.

WC225CCARBIDE

1/4" & 3/8" TONGUE & GROOVE CUTTERS Make these door sets more versatile with these replacement groovers. WC220,WC221, and WC224 can accommodate material up to 2-1/4" with the addition of either of these sets. WC222, WC223 and WC226 will cut up to 1-3/4" doors. Use separately or with 1/4" groover supplied with sets.

3/8" 3/8" 1/4" 1/4"

WC2238S-ALLOY

WC2238CCARBIDE

WC2234S-ALLOY

WC2234CCARBIDE

BEVELPattern for1-3/8" thick Panel Doors

WC226CCARBIDE

1-3/8" 1/4"

WC226S-ALLOY

SHA

PER C

UTTER

SFOR ENTRY DOORS

NEW!

6 To Place An Order Call: 1-800-SCHMIDT 800-724-6438 www.cggschmidt.com6

B�

A

C

A

WINDOW SASH CUTTER SETS - S-ALLOY TIPPEDSchmidt window sash cutter sets use a series of tenons up to 2-1/4" long to produce strong joints in casement and double hung sash. Sets # WC230IN, WC231IN, WC232IN are designed to accommodate insulated glass up to 1/2" thick. Sets WC230, WC231, WC232 are for single strength bead glass. Sticking, rabbeting, and all cope joints shown here can be made with any of our standard sets. Due to the width and depth of cut, a minimum of 5 horse power is recommended for these tools.

A. TOP AND BOTTOM RAILS

B. TOP CHECK RAIL

C. BOTTOM CHECK RAIL

BOTTOM SASH

TOP SASH

• Sets consist of 6 cutters & 1 spacer.

• 1-1/4" bore, 3 wing cutters.

• Use bearing AC115 3-1/2" x 1-1/4" bore

for Pattern Shaping.

• Large diameter cope cutters (approx. 7") allow tenons up to 2-1/4" long.

• Can be made with carbide tips. (Special order).

• Sets for different profiles quoted on request.

• Cope cutters can be made to fit your tenoner.

1/2" PARTING STRIP

BOTTOM CHECK RAIL

TOP CHECK RAIL

CHECK RAIL CUTTERFor cutting Check Rails on Double Hung Sash with 1/2" or 3/8" Parting Strip.• 4" Diameter x 1-1/4" Bore, 3 wing.• These cutters, when combined with our stock Sash

Cutters, cut everything you need to produce double hung sash. Tipped with S-Alloy for smooth cutting.

(Not included with Window Sash Cutter Sets). Carbide available by special order.

WC235CAT. NO.

WC236CAT. NO.

3/8"

3/8"

1/4"

WC231CAT. NO.

1/4"

3/8"

3/8"

WC232CAT. NO.

3/8"

3/8"

1/4"

WC230CAT. NO.

3/8"

1/8"

1/2"

WC231IN*CAT. NO.

3/8"

1/8"

1/2"

WC232IN*CAT. NO.

3/8"

1/8"

1/2"

WC230IN*CAT. NO.

1/2"

3/8"

* Indicates Special Order Hollow mortising chisels and bits available. See page 32

WIN

DO

W S

ASH

CU

TTER

S S-ALLOY TIPPED



Schmidt offers a full range of accessories to compliment our tools.All are made with the quality and precision you need to get your job done right.

BALL BEARING RUB COLLARSCUSTOM - MADE TO ORDER

DIMENSIONS2-1/2" or lessover 2-1/2" to 3-1/2"over 3-1/2" to 4"over 4" to 5"over 5" to 6"

TYPE ACAT. NO. AC100 AC101 AC102 AC102A AC102B

TYPE BCAT. NO. AC103 AC104 AC105 AC105A

STANDARD BALL BEARING RUB COLLAR TYPE A - 1/2" THICK

DIMENSIONS1-5/8" OD x 3/4" bore (7/16" thick)

1-11/16" OD x 3/4" bore (7/16" thick)

2-3/16" OD x 3/4" bore (7/16" thick)

2-15/16" OD x 3/4" bore (7/16" thick)

3-1/8" OD x 3/4" bore (7/16" thick)

2-1/4" OD x 1-1/4" bore2-1/2" OD x 1-1/4" bore ( 5/8" thick)

2-3/4" OD x 1-1/4" bore3" OD x 1-1/4" bore3-1/16" OD x 1-1/4" bore3-1/4" OD x 1-1/4" bore85mm OD x 1-1/4" bore3-1/2" OD x 1-1/4" bore3-3/4" x 1-1/4" bore3-7/8" x 1" bore100mm x 1- 1/4" bore4" OD x 1-1/4" bore (weight relieved)

4-3/8" OD x 1-1/4" bore (weight relieved)

125mm OD x 1-1/4" bore (weight relieved)

CAT. NO. AC106 AC107 AC108 AC109 AC109A AC110 AC111 AC112 AC113 AC113A AC114 AC114A AC115 AC116 AC116A AC116B AC117 AC118 AC125

SPACER SETS Precision Machined to close tolerancesDESCRIPTIONS

1-1/4" bore, 6 pc. 1 3/4" dia.1-1/8" bore, 6 pc. 1 3/4" dia.1" bore 6, pc. 1 1/2" dia.3/4" bore 6, pc. 1 1/4" dia.1/2" bore 6, pc. 1 “ dia.1-1/2" bore 6, pc. 2-1/2 “ dia.40 mm bore 6, pc. 2-1/2 “ dia.

DIMENSIONS1/16",1/4", 3/8", 1/2", 3/4", 1" long1/16",1/4", 3/8", 1/2", 3/4", 1" long1/16",1/4", 3/8", 1/2", 3/4", 1" long1/16",1/4", 3/8", 1/2", 3/4", 1" long1/16",1/4", 3/8", 1/2", 3/4", 1" long1/4", 3/8", 1/2", 3/4", 1", 2" long1/4", 3/8", 1/2", 3/4", 1", 2" long

CAT. NO.AC205AC206AC207AC208AC209AC210AC211

DESCRIPTIONSPlastic shims 3/4" bore x 1 1/16" dia.Plastic shims 1/2" bore x 1 1/16" dia.Plastic shims 1" bore x 2" dia.Plastic shims 1-1/8" bore x 2" dia.Plastic shims 1-1/4" bore x 2" dia..Plastic shims 1-1/2" bore x 2 1/4" dia..Plastic shims 40mm bore x 2 1/2" dia..Plastic shims 1 13/16" bore x 2 1/2" dia..

CAT. NO. AC504AC504AAC505AC506AC507AC508AC511AC512

COLOR CODED PLASTIC SHIMS(For stackable cutter sets)

Consists of 48 pieces in clear plastic box. Eight varied sizes ranging from .003" to .030".

CUSTOM SHIMSShims can be made to order in special sizes. Ask your Schmidt ToolingSpecialist for details.

AC

CESSO

RIES

BEARINGS, BUSHINGS AND SHIMS

DOUBLEFLANGE

LONG FLANGE�SET

SHORT�FLANGE�

SETSTRAIGHT

Spacers

Type A Type B


CAT. NO.AC660AC665AC670

DESCRIPTION4" x 1/8" x 3/8"6" x 3/8" x 3/4"

8" x 3/4" x 1-1/4"

Diamond honing cones simplify a variety of industrial slip honing and deburring tasks. The convex surface of each coneis covered with fine mesh diamond.

DIAMOND HONING CONES

SPRAYWAY Saw Cleaner & Dry Lubricant

SPRAYWAY 836 Saw Cleaner, Pitch & Gum Remover Spray on and wipe off with cloth. Works in minutes. Use on

router bits, shaper cutters, saw blades, etc.

SPRAYWAY SP295 T1 Dry Coating Lubricant.This non-oily, non-staining woodworker’s lubricant remains dry during use. Extremely slick, T1 will not attract or hold dust or dirt and will not become gummy. Repels oil and water. Reduces friction. Inhibits resin build-up while it prolongs tool life.

AC850CAT. NO. AC855

CAT. NO.

DIAMOND SHARPENING STONES

AC650CAT. NO.4" long in folding

plastic handle

AC656CAT. NO.4" long in leather

sheath(not pictured)

Ideal for touching up carbide and S-Alloy tipped cutters and knives in between regular sharpening.Two models available.

BUSHINGS

Double FlangeCAT. NO.AC200TDAC201TDAC202TDAC203TD

1-1/16" StraightCAT. NO.

AC200AC201AC202AC203

DIMENSIONS1-1/4" OD x 1-1/8" ID

1-1/4" OD x 1" ID1-1/4" OD x 3/4" ID

1" OD x 3/4" ID1-1/2" OD x 1-1/4" ID1-1/4" OD x 30mm ID1-1/2" OD x 30mm ID1-1/2" OD x 35mm ID40mm OD x 1-1/4" ID40mm OD x 1-1/2" ID1 13/16" OD x 1-1/2" ID

Long FlangeCAT. NO.AC200TLAC201TLAC202TLAC203TLAC204TLAC280TLAC281TLAC282TLAC283TLAC284TL AC285TL

Short FlangeCAT. NO.AC200TSAC201TSAC202TSAC203TSAC204TSAC280TSAC281TSAC282TSAC283TSAC284TSAC285TS

SPACE BALLS Center your solid wood panels and stop panel rattle with Space Balls.CAT. NO.

AC814AC815AC816

DESCRIPTION3/16" diameter (price per 1000)7/32" diameter (price per 1000)1/4" diameter (price per 1000)

KNIFE GRINDING & WOODWORKING MANUALThe bible for the woodworking knife industry written mostly for operators of heavy duty machines including moulders and shapers. Topics include: Essentials of good grinding, including knife grinding • Composition, care and use of grinding wheels • Setting of knives • Development, selection and care of cutter heads • Cutting angles/bends required for knives • Cutting speeds, feed speeds • General moulder operation • Machine stoppages and causes • Safety

• Wood defects • Structure-wood. 167 pages CAT. NO.

AC400

THE SHAPER BOOKMore than just a primer on shaper techniques. With an emphasis on safety, this book is a step-by-step guide that will teach you all about the shaper; from basic setups to cutting curved molding pro-files to designing shaper jigs that will expand your woodworking potential. Lonnie Bird, a professional woodworker & instructor on shaper use, presents a wealth of information and tips on how shapers can increase the quality and efficiency of your work.

This easy-to-read book is a must for the serious woodworker’s library and shop.

AC408CAT. NO.

ACCESSORIES & MANUALSA

CC

ESSO

RIE

S

Straight, up to 1" Long

Short1/4" Flange

Long1" Flange

DIMENSIONS CAT. NO. CAT. NO. CAT. NO.Up to 1-1/4" OD AC250 AC250TS AC250TL

1-1/4" OD to 2" OD AC251 AC251TS AC251TLOver 2" OD to 3" OD AC252 AC252TS AC252TLOver 3" OD to 4"OD AC253

CUSTOM MADE STEEL BUSHINGS & SPACERS

DOUBLEFLANGE

LONG FLANGE�SET

SHORT�FLANGE�

SETSTRAIGHT

Bushings

MANUALS

Made from a plastic/rubber, these flexible balls are an excellent way of holding your panel securely during normal shrinking and expanding. Panel floats and won’t crack. Available in three sizes. Quantity discounts available.

NEW!

"Priced Individually"

NEW!



CIRCULAR WORK IN CARPENTRY & JOINERYA practical guide on circular work of single and double curvature. This re-edited edition contains numerous drawings giving clear, easily under-stood explanations of the entire field of curved work which includes mouldings, angle brackets, cased frames, elliptical heads, conical roofs and skylights, windows, solid-headed frames and much more. This is an essential guide to curved work and is

the only book on the subject available today.

AC404CAT. NO.

A SIMPLIFIED GUIDE TO CUSTOM STAIRBUILDING AND TANGENT HANDRAILINGThis book can help solve the problems associat-ed with custom stairs. Topics include: • The abil-ity to construct distinctive, personalized, innova-tive stair and handrail designs without the limits of stock stair and handrail parts • Construction of rail sections from solid stock where the finest wood grain can be featured • Continuous incline turns can be pro-duced for any possible condition • There are no forms to build. A must for every stairbuilder. AC406

CAT. NO.

MODERN PRACTICAL JOINERYThis is perhaps one of the best books ever published on the subject. The scope of detailed work practices is enormous. There are 27 chapters and nearly 600 pages, fully illustrated with clear line drawings and diagrams, and 31 photographs. Detailed information includes: Hand tools • Workshop Appliances • Workshop Practices • Machinery • Machine Practice and Use • Preparation of Work and Joints • Doors and Paneling • Windows and

Shutters • Shop Fitting and Showcase Work • Shaped, Curved and Beveled Work • Stairbuilding and Handrailing • and more. AC409

CAT. NO.

SHAPER HANDBOOKThere’s no better way to cut decorative mouldings and join-ery than with the shaper. Quickly master all the techniques for cutting several profiles or shapes in a single pass, as well as accommodating cuts from two directions. Hundreds of techniques are carefully explained in step-by-step, photo-fi l led detail: controls and accessories; cut-ters and attachments, and mastering basic operations. Advanced operations include freehand shaping, shaping with jigs and fixtures and cutting stick joinery. If there’s

anything you need to know about putting a shaper to work, this book belongs next to your workbench. AC405

CAT. NO.

THE COMPLETE ILLUSTRATED GUIDE TO SHAPING WOODThis comprehensive, step-by-step pictorial reference covers every practical method for milling, cutting, carving, turning and bending shapes. Organized for quick access, this book illustrates the techniques in over 1,000 clear photos and drawings. All the essential information is here, from milling stock to turning or carv-ing complex period details. Many alternative ways to achieve the same results are included, allowing woodwork-

ers to choose the one that works best for them. An indispensable reference for every woodworker, whether beginner or pro. AC412

CAT. NO.

MAKING MANTELSBuilding a fireplace mantel is well within the abilities of amateur woodworkers. Making Mantels is a comprehensive guide to the construction of residential mantels. It provides the serious wood-worker, as well as the professional, with all of the critical infor-mation needed to construct a safe and well-designed mantel. Contains all the information needed on: How to design a mantel • Shop and field drawings • Mantels and the Uniform Building Code • Fabricating an off-the-shelf mantel •

Wood finishing • Mantel installation • Secret panels CAT. NO.AC414

CAT. NO.AC413

TRIM CARPENTRY AND BUILT INSProfessional carpenter Clayton DeKorne shows you exactly how to get tight miters and crisp details when casing doors and windows, running baseboard, and putting up crown moulding. You’ll also get pro tips and trade secrets for working with challenges such as out-of-square walls, floors, and ceilings. Detailed step-by-step instructions with hundreds of photos and drawings helps you get professional

results every time.

Building Stairs The editors of Fine Homebuilding magazine have compiled

a selection of stairbuilding articles that covers a broad range of details relating to design, fabrication and installation. It’s all here - from simple, site-built utility staircases to elaborate spirals. These articles will help you to: • Master basic design, layout, and construction techniques • Build railings and newel posts • Build straight, L-shaped, spiral, and curved stairs • Install straight and curved railings •

Install manufactured railings and balusters • Install a drop-down attic stairway.

CAT. NO.AC416

THE COMPLETE MANUAL OF WOOD BENDINGBending wood is an important facet of woodwork-ing. Curved wood can be seen in many different applications, including bentwood chairs, laminated handrails, and milled window components. There is a certain beauty to be found in curved work. Master craftsman Lon Schleining provides step-by-step instruction on every method of producing curved work.

Each process is fully illustrated with photos and drawings. AC411

CAT. NO.

WESTERN PINES CLUB 8000 SERIES MOULDING BOOKA va luab le re fe rence gu ide to common ly used mouldings, the 8000 series is the stan-dard which has been specif ied industry wide for decades. Actual size pictures of crowns, casings, brick moulds and base mouldings are just a few of the mouldings shown in this book. A must for anyone who makes mouldings.

AC407CAT. NO.

MA

NU

ALS

MANUALS & GUIDES

Simply Board Feet Simply board feet is to lumber what the calculator is

to math!! Douglas E. Maxwell has done all the math and put it in one easy resource to calculate board feet for material from 1” to 25-1/2” wide by 1’ to 20’ long. 4/4, 5/4, 6/4, 8/4, 10/4, 12/4 and 16/4 - it’s all there and it’s ready to make your woodworking life easier!

CAT. NO.AC415

The Real Wood BibleThe Real Wood Bible is a comprehensive and fascinating resource for anyone who enjoys working with wood. Woodworkers, crafters, interior designers and DIY- enthusiasts of all skill levels will learn more about the wood they use regularly and discover the benefits of species they hadn’t previously consid-

ered. This book is a must for anyone using decorative or exotic woods. CAT. NO.

AC417

NEW!

NEW!


For Knives cut to other sizes see

table on opposite page.

* Available - special order.

Our new T-1 HSS knives are the longest last-ing steel knives on the market due to an 18%

Tungsten content.

An Excellent Value.

There is a small additional charge for

knives cut to size. See price list.

TNCUTCAT. NO.

THIN

KN

IVES SETS FOR PLANERS & JOINTERS T-1 HSS AND CARBIDE

THIN KNIFE SETS

T1 HSS CARBIDE TIPPED SOLID CARBIDE

SIZE MACHINE QUAN CAT. NO. CAT. NO. CAT. NO.4" x 5/8" x 1/8" Atlas,Boice-Crane, Delta 3 TN600H TN600CT TN600SC6" x 5/8" x 1/8" Boice-Crane, Delta 3 TN604H TN604CT TN604SC6" x 3/4" x 1/8" Powermatic 3 TN606H TN606CT TN606SC

6-1/8" x 19/32" x 3/32" Delta 3 TN610H 8" x 5/8" x 1/8" Boice-Crane, Delta 3 TN615H TN615CT TN615SC8" x 3/4" x 1/8" Powermatic, Pryor 3 TN616H TN616CT TN616SC8" x 7/8" x 1/8" Powermatic 3 TN617H TN617SC

8-1/16" x 5/8" x 3/32" Delta 3 TN620H 12-1/2" x 11/16" x .071" Delta (Double Sided) 2 TN631H

12" x 7/8" x 1/8" Parks, Powermatic 3 TN624H 12" x 1" x 1/8" Craftsman 3 TN625H TN625CT TN625SC

12" x 1-1/4" x 1/8" Northfield 3 TN626H TN626CT 12-1/4" x 7/8" x 1/8" Powermatic, Robland 3 TN630H TN630CT 12-1/2" x 3/4" x 1/8" Foley-Belsaw/Jet 3 TN632SC

12-1/2" x 11/16" x 1/8" Foley-Belsaw/Jet 3 TN632H TN632CT13-1/16" x 5/8" x 1/8" Delta 3 TN633H TN633CT

13-1/8" x 11/16" x 5/32" Delta (End Slots) 3 TN634H TN634CT13-1/8" x 1" x 1/8" Rockwell 3 TN635H TN635CT TN635SC15 x 11/16" x 1/8" Powermatic PM15 3 TN635AH TN635ACT

15" x 1" x 1/8" Grizzly 3 TN6355H TN6355CT TN6355SC16" x 1-1/4" x 1/8" Northfield 3 TN636H TN636CT16" x 1-1/4" x 1/8" Northfield 4 TN636BH TN636BCT*

16-3/16" x 30mm x 1/8" SCMI 410 4 TN636AH TN636AC*16-1/4" x 1-1/4" x 5/32" Powermatic 3 TN637H TN637CT*

18" x 1-1/4" x 5/32" Powermatic 3 TN639H TN639CT*18-1/8" x 1-1/8" x 5/32" Delta 3 TN640H18-1/4" x 1-1/4" x 5/32" Powermatic 3 TN641H TN641CT*

20" x 1" x 1/8" Parks, Northstate 4 TN642H TN642CT*20" x 1" x 1/8" Grizzly, Northwood 3 TN642AH TN642AC*

20-1/4" x 1-1/4" x 5/32" Powermatic 3 TN643H TN643CT*20-1/2" x 30mm x 1/8" SCMI 552, 550, 520 4 TN643AH TN643AC

24" x 1-1/4" x 5/32" Northfield, Powermatic 4 TN644H TN644CT*25-3/16" x 1-3/8" x 1/8" SCMI F535, F630 4 TN645H TN645CT*

In stock in Carbide Tipped, T-1 High Speed Steel and Solid Carbide. All of our thin knives are made of the finest quality steels and carbides. Between our pre-packaged sets and our full stock of longer lengths, no one can offer a greater selection.

NEW!

NEW!NEW!



THIN

KN

IVESBAR LENGTHS T-1 HSS AND CARBIDE

Carbide Tipped Bar Stock

Carbide tipped bar lengths are now a stock

item. Several sizes of the most popular thin knives are available from stock

ready to equip any straight knife planer with long last-ing carbide tipped knives fast. Stocked in 1/8" and

5/32" thickness, 25"and 31" lengths.

* Available - special order

Knives cut to size.

per cutTCCUTCAT. NO.

37" CTCAT. NO.

TC10537*

TC20537*

31" CTCAT. NO.

TC10331*TC10431*TC10531TC10631

TC20531*

TC20731

T1 HSS and CARBIDE TIPPED : Bar LengthsStocked in three lengths, these bars can be cut to size if your set is not listed on opposite page.

Length and typeSIZE

5/8" x 1/8"3/4" x 1/8"7/8" x 1/8"1" x 1/8"

1-1/8" x 1/8"1-1/4" x 1/8"1-3/8" x 1/8"1-1/2" x 1/8"

1" x 5/32"1-1/8" x 5/32"1-1/4" x 5/32"1-3/8" x 5/32"1-1/2" x 5/32"1-3/4" x 5/32"

2" x 5/32"

25" T1 CAT. NO.

TN100TN101TN102TN103TN104TN105TN106TN107

TN204 TN205TN206TN207TN208TN209

31" T1CAT. NO.

TN10131

TN10331TN10431TN10531TN10631TN10731TN20331

TN20531TN20631TN20731TN20831TN20931

25" CTCAT. NO.

TC103TC104TC105TC106TC107

TC205

TC207

37" T1CAT. NO.TN10037TN10137

TN10337

TN10537TN10637TN10737

TN20437TN20537TN20637TN20737TN20837

SMOOTH BACK BARS 25" LONGFor planing or profiling. Supplied in M-2 or XLWBars can be cut to size for an additional charge. TNCUT See price list.

XLW M2 HSSSIZE

1-1/4" x 3/16"1-1/2" x 3/16"1-3/4" x 3/16"

2" x 3/16"2-1/4" x 3/16"2-1/2" x 3/16"1-1/4" x 1/4"1-1/2" x 1/4"1-3/4" x 1/4"

2" x 1/4"2-1/4" x 1/4"2-1/2" x 1/4"

CAT. NO.TN300XTN301XTN302XTN303XTN304XTN305XTN400XTN401XTN402XTN403XTN404XTN405X

CAT. NO.TN300HTN301HTN302HTN303HTN304HTN305HTN400HTN401HTN402HTN403HTN404HTN405H

MAGNETIC KNIFE SETTING GAUGES GUARANTEED KNIFE TOLERANCE + OR - .002"

Decrease set up time by 75% using these tools. Easy to use on any machine

CAT. NO.AC803

DESCRIPTIONRotocator

ROTATING DIAL INDICATORROTOCATOR is used to set all adjustable settings on any planer. (Feed bed rollers, pres-sure bars and chip breakers). Can also be used to set shaper knives.

JOINTER JIG

For setting knives up to 8" long. Extra magnetic bars and extension rods available for knives up to 30".

CAT. NO.AC801

AC801C

DESCRIPTIONJointer Jig

Jointer Jig Carbide

PLANER JIGFor knives up to 10".Order 2 planer jigs for knives 12" - 20" long.Order 3 planer jigs for knives over 20" long.

DESCRIPTIONPlaner Jig

Planer Jig Carbide

CAT. NO.AC802

AC802C


SHA

PER

STE

EL BEVELED EDGEHEAT TREATED & GROUND 25" BARS Schmidt Shaper Steel is manufactured from the highest quality steel available. Whether you use M2 high speed steel or our proven XLW grade, satisfaction is guaranteed. Choose steel thickness based on pattern depth. Our shaper steel is sold in 25" bars only, with or without lockedge, and can be cut to size. Lockedge and cutting are additional charges.

M2 High Speed SteelSIZE

3/4" x 1/4"1" x 1/4"

1-1/4" x 1/4"1-1/2" x 1/4"1-3/4" x 1/4"

2" x 1/4"2-1/4" x 1/4"2-1/2" x 1/4"3/4" x 5/16"1" x 5/16"

1-1/4" x 5/16"1-1/2" x 5/16"1-3/4" x 5/16"

2" x 5/16"2-1/4" x 5/16"2-1/2" x 5/16"2-3/4" x 5/16"

3" x 5/16"1" x 3/8"

1-1/4" x 3/8"1-1/2" x 3/8"1-3/4" x 3/8"

2" x 3/8"2-1/4" x 3/8"2-1/2" x 3/8"2-3/4" x 3/8"

3" x 3/8"

CAT. NO.SS102HSS104HSS106HSS108HSS110HSS112HSS114HSS116HSS202HSS204HSS206HSS208HSS210HSS212HSS214HSS216HSS218HSS220HSS302HSS304HSS306HSS308HSS310HSS312HSS314HSS316HSS318H

OTHER SERVICESCAT. NO.

SS800SS802

DESCRIPTIONLockedge 1 side

Cutting into pieces

XLWSIZE

3/4" x 1/4"1" x 1/4"

1-1/4" x 1/4"1-1/2" x 1/4"1-3/4" x 1/4"

2" x 1/4"2-1/4" x 1/4"2-1/2" x 1/4"3/4" x 5/16"1" x 5/16"

1-1/4" x 5/16"1-1/2" x 5/16"1-3/4" x 5/16"

2" x 5/16"2-1/4" X 5/16"2-1/2" x 5/16"2-3/4" x 5/16"

3" x 5/16"3-1/4" x 5/16"3-1/2" x 5/16"

1" x 3/8"1-1/4" x 3/8"1-1/2" x 3/8"1-3/4" x 3/8"

2" x 3/8"2-1/4" x 3/8"2-1/2" x 3/8"2-3/4" x 3/8"

3" x 3/8"3-1/4" x 3/8"3-1/2" x 3/8"

CAT. NO.SS102XSS104XSS106XSS108XSS110XSS112XSS114XSS116XSS202XSS204XSS206XSS208XSS210XSS212XSS214XSS216XSS218XSS220XSS222XSS224XSS302XSS304XSS306XSS308XSS310XSS312XSS314XSS316XSS318XSS320XSS322X

Maximum Pattern depth is 3 to 4 times the thickness of the steel depending on width of cut and material to be cut.

STEEL BEVELED EDGE KNIVESPrices are per pair. Our XLW steel cut to length, squared, balanced, and sharpened for flush cutting. For grinding your own profiles, order knives long enough to extend the full length of grooves plus the pattern depth. (Never grind shapes deeper than 4 times the steel thickness).Add SS800 for lock edging (specify rotation).CARBIDE TIPPED SHAPER KNIVES Prices are per pair. These knives are stocked 2-3/4" long with 1/2" carbide inlay. For Flush cutting, be sure to tell us what size shaper collars you have.Add SS800 for lock edging (specify rotation).

BEVELED EDGE STRAIGHT KNIVES

CUTTING EDGE LENGTH

1"1-1/4"1-1/2"1-3/4"

2"2-1/4"2-1/2"

3"

5/16"CAT. NO.

SK201SK202SK203SK204SK205SK206SK207SK209

1/4"CAT. NO.

SK101SK102SK103SK104SK105SK106SK107

3/8"CAT. NO.

SK301SK302SK303SK304SK305SK306SK307SK309

3/8"CTCAT. NO.

CT102CT103CT104CT105CT106CT107CT108CT110



TERSA

, TERM

INU

S KN

IVESTERSA, TERMINUS & CENTROLOCK KNIVESIf your application demands constant diameters, long production runs and fast tooling changes, we can supply the latest HSS and Carbide replacement knives.

REPLACEMENT KNIVES FOR TERSA HEADS: HSS & Carbide(M42 also available)

Length60mm (2.36")100mm (3.93")120mm (4.72")130mm (5.11")150mm (5.96")180mm (7.08")190mm (7.48")230mm (9.05")240mm (9.44")320mm (12.59")400mm (15.78")410mm (16.14")510mm (20.07")520mm (20.47")630mm (24.80")640mm (25.19")

HSSCAT. NO.T950060T950100T950120T950130T950150T950180T950190T950230T950240T950320T950400T950410T950510T950520T950630T950640

CarbideCAT. NO.T960060T960100T960120T960130T960150T960180T960190T960230T960240T960320T960400T960410T960510T960520T960630

N/A

Terminus, Centrolock and Tersa knivesWe now carry replacement HSS and Carbide knives for the most popular constant diameter heads. Terminus, Tersa and Centrolock. Each with their own design for quick changing, these knives are an economical way of keeping your machine running and minimizing downtime. Listed below are the most popular sizes in steel and carbide but all sizes are available. Any HSS Tersa knife not listed can be cut a shipped same day. Knives are not interchangeable.

REPLACEMENT KNIVES FOR WEINIG HEADS: HSS & Carbide

Length60mm (2.36")100mm (3.93")130mm (5.11")150mm (5.96")190mm (7.48")230mm (9.05")240mm (9.44")270mm (10.62")300mm (11.81")460mm (18.11")650mm (25.59")

HSSCAT. NO.T920060T920100T920130T920150T920190T920230T920240T920270T920300T920460T920650

CarbideCAT. NO.T921060T921100T921130T921150T921190T921230T921240T921270T921300T921460T921650

Call your Schmidt Salesman for price and availability on Tersa and Terminus heads for your moulder, shaper, planer or jointer.

REPLACEMENT KNIVES FOR TERMINUS HEADS: 18% Tungsten & Carbide

Length50mm (1.96")60mm (2.36")

100mm (3.93")120mm (4.72")130mm (5.11")150mm (5.96")170mm (6.69")180mm (7.08")190mm (7.48")230mm (9.05")240mm (9.44")

457mm (17.99")463mm (18.22")616mm (24.25")770mm (30.31")

SteelCAT. NO.IT9505SIT9506SIT9510SIT9512SIT9513SIT9515SIT9517SIT9518SIT9519SIT9523SIT9524SIT9545SIT9546SIT9561SIT9577S

CarbideCAT. NO.IT9505CIT9506CIT9510CIT9512CIT9513CIT9515CIT9517CIT9518CIT9519CIT9523CIT9524CIT9545CIT9546CIT9561C

N/A

Tersa and Terminus heads are also readily available for many types of

moulders and planers. Ask your sales-man about heads for your machine.

NEW!


“SCHure • Lock” KNIFE SYSTEM gives you the ability to grind your own carbide straight and profiled knives without grinding steel and carbide at the same time, which can cause the grinding wheel to load and deteriorate prematurely. Interlocking corrugations on both the face of the corrugated steel blank and the back of the solid carbide knife, allow the pieces to be ground separately. Premium C3 micrograin carbide gives superior tool life in tough materials like MDF and abrasive natural woods. The full corrugation design allows more adjustment than other similar products. Available in three widths for planing and profiling. 60° corrugations only. Any “SCHure • Lock” Knives can be custom ground to your profile. Quoted on request.

Cutting Length 38mm Width 50mm Width 60mm Width

metric • (inch) CAT. NO. CAT. NO. CAT. NO.

10mm (.39") SL103S SL105S SL106S

20mm (.78") SL203S SL205S SL206S

30mm (1.18") SL303S SL305S SL306S

40mm (1.57") SL403S SL405S SL406S

50mm (1.96") SL503S SL505S SL506S

60mm (2.36") SL603S SL605S SL606S

70mm (2.75") SL703S SL705S SL706S

80mm (3.14") SL803S SL805S SL806S

90mm (3.54") SL903S SL905S SL906S

100mm (3.93") SL1003S SL1005S SL1006S

110mm (4.33") SL1103S SL1105S SL1106S

120mm (4.72") SL1203S SL1205S SL1206S

130mm (5.11") SL1303S SL1305S SL1306S

140mm (5.51") SL1403S SL1405S SL1406S

150mm (5.96") SL1503S SL1505S SL1506S

160mm (6.29") SL1603S SL1605S SL1606S

170mm (6.69") SL1703S SL1705S SL1706S

180mm (7.08") SL1803S SL1805S SL1806S

190mm (7.48") SL1903S SL1905S SL1906S

200mm (7.87") SL2003S SL2005S SL2006S

210mm (8.26") SL2103S SL2105S SL2106S

220mm (8.66") SL2203S SL2205S SL2206S

230mm (9.05") SL2303S SL2305S SL2306S

240mm (9.44") SL2403S SL2405S SL2406S

250mm (9.84") SL2503S SL2505S SL2506S

“SCHure • Lock” CARBIDE KNIFE SYSTEM

Fits in all types of cutter headscapable of accepting 10mm thick knives.

Interlocking corrugations ensure a “SCHure • Lock” fit.

CARBIDE TIPPED OR S-ALLOY TIPPEDCORRUGATED BACK KNIVES For planing and profiling

LENGTH OFCUTTING EDGE

2"4"6"7"9"

9.44"25"

1/2" INLAY DEPTH1-1/4" HEIGHT

CAT. NO.CT400ACT400BCT400C

CT400D


CAT. NO.CT401ACT401BCT401C

CT401D

CT401

1" INLAY DEPTH2" HEIGHTCAT. NO.CT402ACT402BCT402C

CT402D

CT402Knives can be cut to size from above. See price list. CAT NO. CTCUT. 16-60° corrugationsstandard -16-90° corrugations are special order. Replace CT with ST for S-Alloy part numbers. S-Alloy tipped may have 1 seam on 9" knives.

DEPTHOF

CARBIDE

60°

5/16"


CAT. NO.CT400A5CT400B5CT400C5CT40057CT400D5CT400E5CT4005

See page 18 for diamond and vitrified grinding wheels.

“SC

Hur

e • L

ock” CARBIDE KNIFE SYSTEM



Our corrugated and Williams & Hussey bars are made of quality steels, accurately heat treated and precision ground for optimum results. For standard and custom ground corrugated back profile knives. See our standard profile knives on pages 19-26.

STRAIGHT KNIVES FOR PROFILING for the Williams & HusseyCUTTING EDGE

HEIGHT 2" or less

2-1/4"2-1/2"

1-7/8"CAT.NO.WH622WH632WH642

2-7/8"CAT.NO.WH623WH633WH643

3-7/8"CAT.NO.WH624WH634WH644

4-7/8"CAT.NO.WH625WH635WH645

5-7/8"CAT.NO.WH626WH636WH646

7"CAT.NO.WH627WH637WH647

WILLIAMS & HUSSEY STEEL BARS 25" LONG for the Williams & Hussey Molder and similar machines• With cutting edge • M-2 grade Our bars are now also available with 16-60° corrugations for use in corrugated knife heads, Williams & Hussey heads and Williams & Hussey machines. (see page 27,47) *All corrugated bars are 1/4" thick.

BAR LENGTH 25" LONG without with corrugations corrugations

1-3/4" x 3/16"2" x 1/4"

2-1/4" x 1/4"2-1/2" x 1/4"

CAT. NO.

WH601CB*WH602CBWH603CB

CAT. NO.WH600WH601WH602WH603

• Standard Straight Planing Knives 7" x 1 1/2" x 1/4" WH621

CAT. NO.

• M-2 Grade for long wear.• Custom ground knives quoted on request.• See pages 19 thru 26 for our standard profiles. • Sold in pairs.

CBCUTCAT. NO.

Ask about our custom knife grinding service for all types of knives. Bars may be cut to any size.Cutting charge per cut.

KN

IFE STOC

KCORRUGATED AND WILLIAMS & HUSSEY

CORRUGATED BACK STEEL BARS 25" LONGXLW HP, M2 and Schmidt Super Steel available with 16-90° or 16-60° corrugations. *T1, & M3 available with 16-60° only.

Stabilize your cutter heads by filling all pockets. For all cutter heads when not filling all pockets with knives.Specify 16-60° or 16-90° corrugations. Bars can be cut to size for an additional charge.

STEEL FILLER BARS 25" LONGSIZE CAT. NO.

25" x 13/16" x 5/16" 60°Corr. CB410625" x 13/16" x 5/16" 90°Corr. CB410925" x 13/16" x 1/4" 60°Corr. CB411625" x 13/16" x 3/8" 60°Corr. CB4126

25" x 13/16" x 10mm 60°Corr. CB4136

M3CB STEEL

SCHMIDTSUPER STEEL

M2 HIGH SPEED STEEL

*T1 HIGH SPEED STEELXLW HP

SIZE1-1/4" x 1/4"1-1/2" x 1/4"1-3/4" x 1/4"

2" x 1/4"2-1/4" x 1/4"2-1/2" x 1/4"1-1/4" x 5/16"1-1/2" x 5/16"1-3/4" x 5/16"

2" x 5/16"2-1/4" x 5/16"2-1/2" x 5/16"2-3/4" x 5/16"

3" x 5/16"3-1/4" x 5/16"3-1/2" x 5/16"

CAT. NO.CB841H6CB842H6CB843H6CB844H6CB845H6CB846H6CB851H6CB852H6CB853H6CB854H6CB855H6CB856H6CB857H6CB858H6CB859H6CB860H6

CAT. NO.CB101SCB102SCB103SCB104SCB105SCB106SCB201SCB202SCB203SCB204SCB205SCB206SCB207SCB208S

CAT. NO.

CB102T6CB103T6CB104T6CB105T6CB106T6

CB202T6CB203T6CB204T6CB205T6CB206T6CB207T6 CB208T6

CAT. NO.CB101XCB102XCB103XCB104XCB105XCB106XCB201XCB202XCB203XCB204XCB205XCB206XCB207XCB208XCB209XCB210X

CAT. NO.

CB201M6CB202M6CB203M6 CB204M6CB205M6 CB206M6CB207M6

NEW!

For grinding room supplies go to page 18.

NEW!

NEW!


We are proud to introduce our expanding line of High Quality Saw Blades. Our High Quality Blades will give an extremely fine cut on all types of materials used in high quality woodworking shops. Ask us about our new laser cut, low noise saw plates. Anti-vibration saw blades at economical prices.

Altendorf/Striebig

SCMI/MartinAltendorf

GibenSchelling

SCMISchellingHolzmaSelco

Schelling

KERF BORE.110/.141"

4.3/5.3mm

.110/.141"

4.3/5.3mm4.3/

5.3mm4.3/

5.3mm

4.3/5.3mm

4.7/5.7mm

4.7/5.7mm

4.3/5.3mm

22mm5/8"

22mm5/8"5/8"

55mm20mm45mm65mm20mm

CONICALGRINDNo.

TEETHDIA.100mm120mm120mm125mm150mm160mm200mm200mm200mm200mm

2x1024

2x1224243634363636

CAT. NO.SBS10X2SBS1224SBS12X2SBS1225SBS1524SBS1636SBS2034SBS2036ASBS2036BSBS2036C

SPECS.

(2) 7mm pinholes on

66mm bolt circle

(2) 9mm pinholes on

110mm bolt circle

SCORING SAW BLADES High QualityThese blades are used on panel saws with separate scoring blades for chip free cuts on both sides of double sided laminates. Sizes to match main blades above.

• Our most popular blades are now made with new Low Noise, Laser Cut Saw Plates for noise reduction. Ask us about our new band saw blades on page 45. We have blades for all types of machines.

No.TEETH KERF BOREDIA.

6 1/2"8 1/4"8 1/2"

9"10"12"14"15"

Dewalt SidekickDelta & Sears

Dewalt,Ryobi,HitachiDelta

Hitachi,Makita,RyobiHitachi,Makita,Sears

Makita,RyobiHitachi

406060808080100100

.094"

.094"

.094"

.109"

.109"

.125"

.125"

.094"

5/8"5/8"5/8"5/8"5/8"1"1"1"

CAT. NO.SBCS640SBCS740SBCS860•SBCS980 SBCS108•SBCS128•SBCS141 SBCS151

MITER & CHOP SAW BLADES High QualitySpecially designed for smooth, chip free cutting without kickback on all chop and miter saws.

ATBW / RAKER

PANEL SAW BLADES High QualityPrecision ground and made for all popular panel saws. Find main blades here and matching scoring blades below.

PANEL SAWSHolz-herHolz-herStriebig

Altendorf/SCMIStriebig/Holz-her

StriebigStriebig/Holz-her

SCMIGiben,SCMI

Altendorf/SCMI Schelling

GibenSchelling

GibenSelco

KERF BORE

4.4mm

4.4mm

4.8mm

30mm30mm30mm30mm30mm30mm30mm

1"80mm30mm30mm 30mm75mm30mm75mm80mm

TCG GRINDNo.TEETHDIA.

220mm220mm300mm300mm300mm300mm300mm300mm350mm350mm350mm 400mm400mm400mm400mm450mm

64646072100100100100727272 6060727272

SPECS.(2) 7mm pinholes on 42mm

bolt circle(2) 7mm pinholes on 42mm

bolt circle

(2) 10mm pinholes on

60mm bolt circle

(2) 10mm pinholes on 60mm bolt circle

2 Combination pin holesfor 35mm to 70mm bolt cicle




CAT. NO.SBPS226SBPS226ASBPS306SBPS307SBPS310SBPS313SBPS314•SBPS315•SBPS357ASBPS357BSBPS357CSBPS406SBPS416SBPS407SBPS417SBPS457

SAW

BLA

DES PANEL, SCORING, MITER & CHOP



KERF ARBOR.125.125.125.135.135.135.156.156.156.156

5/8"5/8"5/8"1"1"1"1"1"1"1"

TCG GRINDNo.

TEETH

ATBGRIND

DIA.10"10"10"12"12"12"14"14"16"16"

40608040608060806080

CAT. NO.SBCO532•SBCO534•SBCO536•SBCO537SBCO539•SBCO541•SBCO544SBCO546SBCO549SBCO551

CAT. NO.SBCO504SBCO506•SBCO508•SBCO509•SBCO511•SBCO513•SBCO516SBCO518SBCO521SBCO523

CUT OFF AND TRIM SAWS High QualityFor hard wood, soft wood, plywood, veneer, panel, flakeboard, fiberboard, and masonite. ATB grind recommended for fine chip free cutting. Triple Chip grind recommended for abrasive materials such as flakeboard.

KERF ARBOR.140.175.175.175.190

5/8"1"1"1"1"

No.TEETH

STG GRINDPOWER FEED

DIA.10"12" 14"14"16"

2424 243636

CAT. NO.SBR308

SBR309•SBR312SBR313SBR314

RIP SAWS High QualityFor ripping hard and soft woods.

BOREPLATE

THICKNESS

.085

.085

.095

.120

.120

5/8"5/8"1"1"1"

KERF HOOK

.115

.115

.125

.150

.150

-5°-5°-5°-5°-5°

No.TEETH

30° ATBGRIND

DIA.8"

10"12"14"16"

6080

100100120

CAT. NO.SBDF100SBDF101•SBDF102•SBDF103SBDF104

DOUBLE FACE LAMINATE SAWS High QualityFor cutting Melamine and Formica panels.

BOREPLATE

THICKNESS.086 .086.095.080.085

5/8"5/8"1"

30mm30mm

KERF HOOK

.110

.110

.117

.102

.115

-2°-2°-2°-5°-5°

No.TEETHDIA.

8"10"12"

220mm

300mm

6080

10064

100

CAT. NO.SBSS100SBSS101•SBSS102•SBSS103SBSS104

SOLID SURFACE BLADES High QualityFor the smoothest cutting on solid materials such as TopStone®, Corian® and other solid surface materials. Special clearances allow for the smoothest cut on these materials, and give a finish which requires virtually no sanding or polishing. TC-45 Grind

DADO SETS High QualityFor use on table or radial arm saws and double end tenoners.

No.TEETH

402424

MAX WIDTH OF CUT

1/4" x 13/16"1/4" x 13/16"1/4" x 13/16"

STD BORE SIZEDIA.

8"10"12"

5/8" x 1"5/8" x 1"

1"

CAT. NO.SBDS914SBDS912SBDS913

Other diameter and widths of cuts available.

TC - 45GRIND

KERF ARBOR.145.160 .170.170

5/8"1"1"1"

No.TEETHDIA.

10"12" 14"16"

30303636

CAT. NO. SBR307• SBR311•

SBR316SBR317

GLUE LINE RIP BLADES High QualitySmooth cut for all glue line applications.

TCG GRIND

COMBINATION SAWS High QualityAn all around saw ideal for small woodworking or cabinet shops where one saw is used for all types of cutting.

ATBGRIND

KERF ARBOR.085.110 .110.120

5/8"1"1"1"

No.TEETHDIA.

10"12" 14"16"

50607080

CAT. NO.SBCO533•SBCO547•SBCO548SBCO550

SAW

BLA

DES

CUT OFF, TRIM, RIP, DADO & COMBINATION

• Our most popular blades are now made with new Low Noise, Laser Cut Saw Plates for noise reduction. Ask us about our new band saw blades on page 45. We have blades for all types of machines.


GRINDING COOLANT (For use with all profile grinders)DESCRIPTION

1 gal. container (35 to 1 concentration)

CAT. NO. AC900

Improve your grinders performance by using our coolant. Improves finish, slows down wheel loading, prevents rust. Available in 1 gallon containers. Mix approximately 35 to 1 for best performance.

We now have 1/8" thick plastic as well as our .050 thick blue tempered steel template material. Perfect for template mach ines or eas i ly formed by hand. Ask us about our custom made

plastic templates made to your drawing, wood sample or DXF file. Templates are made from 3/16" thick acrylic. Aluminum and steel templates quoted on request.

DESCRIPTION3" x 24" Template steel

3" x 24" Template plastic4" x 24" Template steel

4" x 24" Template plastic

CAT. NO. AC501AC501PAC5014AC5014P

TEMPLATE MATERIAL

V = Vitrified Aluminum Oxide (specialty formulated for grinding Schmidt XLW, M2, M3 knife steel)C = Vitrified Ceramic Aluminum Oxide (for longer wheel life and better finishes)D = Diamond (for grinding carbide profile and straight knives) B = Borazon (for grinding HS Steels and S-Alloy knives and cutters).

GRINDING WHEELS For Profile Grinding Machines

Ceramic Grinding Wheels: for M-2 High Speed Steel.Our most popular grinding wheels are now available in ceramic. Grind longer and get a better finish.Cat No. GW112 For all Weinig profile Grinders.Cat No. GW205C For Utma, Foley, Diehl, Oliver Grinders.

Schure-Lock Carbide Knife System Grinding WheelsUsing these three wheels your SCHure-Lock carbide knives will come out perfect every time. Can also be used to grind Bak-Pak and Double Back systems. Made for Weinig knife grinders.Cat No. GW100. 225 X 5mm x 60mm bore. For roughing and finishing the steel backing.Cat No. GW321 8" x 4mm x 60mm bore. For roughing out the carbide.Cat No. GW322 8" x 1/16" x 60mm bore. For finishing the carbide.

MOULDER BED LUBE(Oil base moulder lubricant)

DESCRIPTION1 gal. container 5 gal. container

CAT. NO. AC910AC912

An oil base material which is fortified with oxidation, rust and foam inhibitors to give excellent perfor-mance as a friction reducer and lubricant. It can be applied by injection, brushing or spray. A minimal oily film is left on the metal to allow for movement of lumber or wood by-products without resistance.

GR

IND

ING

WH

EELS GRINDING SUPPLIES

MACHINE SIZE TYPE GRIT CAT. NO. BOXWeinig 225mm x 5mm x 60mm V 54(white) GW100 10

Weinig 225mm x 5mm x 60mm V 46 (pink) GW101 10

Weinig 225mm x 5mm x 60mm V 100 GW105 10

Weinig 225mm x 5mm x 60mm C 46 GW112 10

Wadkin 9" x 3/16" x 1-1/4" V 54 GW115 10

Wadkin, Foley 8" x 1/4" x 1-1/4" V 54 GW120 10

Wadkin, Foley 8" x 1/8" x 1-1/4" V 54 GW130 10

Utma, Foley, Diehl, Oliver 10" x 1/4" x 1-1/4" V 54 GW200 10

Utma, Foley, Diehl, Oliver 10" x 1/8" x 1-1/4" V 54 GW205 10

Utma, Foley, Diehl, Oliver 10" x 1/8" x 1-1/4" C 46 GW205C 5

Weinig 8" x 3/16" x 60mm D-Square 180 GW300 1

Weinig 8" x 3/16" x 60mm D-Radius 180 GW305 1

Weinig 8" x 4mm" x 60mm D-Radius 220 GW321 1

Weinig 8" x 1/16" x 60mm D-Radius 220 GW322 1

Weinig 8" x 2mm X 60mm B-Radius 120 GW343C 1

Weinig 8" x 2mm X 60mm B-Square 120 GW344C 1

Cut Off Wheel 14" x 3/32" x 1" n/a n/a GW150 1

DIAMOND DRESSERS We carry hand-held dress-ers to use on bench grinders and other machines. We stock single point diamond dressers to fit most Weinig profile grinders.

DESCRIPTIONNon threaded for 930 thru 936

Threaded for 925, 934N, 950, 9607/16 x 4 1/2 ct hand held

CAT. NO. AC902AC903AC906

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!



Crowns

STANDARD PROFILE KNIVESNow you can pick the cutter head and the cutters you need from the same handy piece of literature. These profiles are in stock for immediate shipment and can also be incorporated into other types of tooling such as carbide, S-Alloy tipped cutters and knives, or Schure Lock knives.

Over 170 profiles in stock for both corrugated heads and Williams & Hussey machinesAll made from Schmidt M2 High Speed Steel. Ask us about our other quality, corrugated back steels in M3, XLW , T-1 and Schmidt Super Steel.See available heads on pages 27 & 28

These knives are kept in stock for 60 degree corrugated heads and the Williams & Hussey Molder and are ready for immediate shipment. Prices shown are per pair. Please specify with CB for corrugated back or WH for use on the Williams & Hussey. eg: CBDY45 or WHDY45.

These profiles can also be ground for use in other types of tool holders and machines.Shaper Knives Where applicable for lock-edge shaper knives add 15% to price shown.

1/4" Smooth Back For Jet, RBI, Woodmaster, Foley and Powermatic machines add 20% to prices shown for sets of three. For one knife take 70% of price shown.

Allow one week for delivery on all non-stocked knives.For profiles not shown or knives ground for other types of machines or tool holders call our Custom Knife Department.

CAT. NO.WM47priced

per pair

CAT. NO.WM48priced

per pair

CAT. NO.WM49priced

per pair

CAT. NO.WM52priced

per pair

CAT. NO.WM51priced

per pair

CAT. NO.DY46priced

per pair

CAT. NO.DY45priced

per pair

KN

IFE PRO

FILESCROWNS


CAT.NO.WM53priced

per pair

CAT.NO.WM54priced

per pair

CAT.NO.WM59priced

per pair

CAT.NO.WM57priced

per pair

CAT.NO.WM67priced

per pair

CAT.NO.WM58priced

per pair

CAT.NO.WM68priced

per pair

Beds

Quarter Rounds

Stools

Base Shoes

Coves

CAT.NO.WM70priced

per pair

CAT.NO.WM74priced

per pairCAT.NO.

WM75priced

per pair

CAT.NO.WM81priced per pair



CAT.NO.WM86priced

per pair

CAT.NO.WM89priced perpair

R

3/8"

Radius CAT.NO. 1 1/4" WM102 /pr 1 1/16" WM103 /pr 1" WM104 /pr 3/4" WM105 /pr 11/16" WM106 /pr 5/8" WM107 /pr 1/2" WM108 /pr 3/8" WM109 /pr 1/4" WM110 /pr

CAT.NO.WM116

priced per pair CAT.NO.

WM119priced

per pair

CAT.NO.WM127

priced per pair

CAT.NO.WM126

priced per pair

R

1/2

Radius CAT.NO 3/4" WM93 5/8" WM94 9/16" WM95 1/2" WM96 7/16" WM100 3/8" WM101

Crowns 38 and 52 degree angle knives available for back cuts on crown and bed mouldings. See page 22.

38L

52R

45 L

45 R

45 degree angle knives available for back cuts on cove mouldings. See page 22.

Coves

* Profiles conform to WM series patterns

KN

IFE

PRO

FILE

S BEDS, COVES, STOOLS, BASE SHOES



Flat AstragalsCAT. NO.WM133

priced per pair CAT. NO.DY156

priced per pair

CAT. NO.DY161

priced per pair

CAT. NO.DY162

priced per pair

CAT. NO.DY157

priced per pair

CAT. NO.DY158

priced per pair

CAT. NO.DY159

priced per pair

CAT. NO.DY160

priced per pair

CAT. NO.WM134

priced per pair

CAT. NO.WM135

priced per pair

Glass Beads

CAT. NO.WM147priced per

pair


pair

Nosing and Cove

Base Mouldings/Caps

CAT. NO.DY152

priced per pair

CAT. NO.DY154

priced per pair

Not Available for Williams & Hussey


CAT. NO.DY155

priced per pair

CAT. NO.DY153

priced per pair

CAT. NO.DY163

priced per pair


pair


pair


pair


pair


pair

Brick Moulding

Panel Mouldings

CAT. NO.WM175

priced per pair

CAT. NO.WM180

priced per pair


pair


pair


pair


pair


KN

IFE PRO

FILESPANEL, BRICK, ASTRAGALS, CAPS


Solid Crowns

CAT.NO.DY191

priced per pair

CAT.NO.DY204

priced per pair

CAT.NO.WM207priced per

pair CAT.NO.WM212priced per

pair


pair


pair

CAT.NO.DY192

priced per pair

CAT.NO.DY193

priced per pair

CAT.NO.DY194

priced per pair

CAT.NO.DY195

priced per pair


pair

Producing this profile on a shaper requires 2 passes.

Producing this profile on a moulder requires an additional set of knives.


pair

CAT.NO.DY202

priced per pair

CAT.NO.DY203

priced per pair

CAT.NO.DY205

priced per pair

Shingle Panel Mouldings


pair

Picture Mouldings

Chair Rail & CasingsCAT.NO.WM297priced per

pair


pair


pair


pair


pair

WM207 will also produce

WM209 & 210


pair


pair


pair


pair

CAT.NO.WM274

priced per pair


2 passesrequired For

Williams & Hussey


2 passesrequired for

Williams & Hussey

KN

IFE

PRO

FILE

S PICTURE, CHAIR, CASING, SHINGLE



Chair Rail & Casings


pair


pair


pair


pair


pair


pair


pair


pair

CAT.NO.DY400

priced per pair

CAT.NO.BR401

priced per pair

CAT.NO.DY402

priced per pair

CAT.NO.SM403

priced per pair


pair


pair

CAT.NO.DY404

priced per pair

CAT.NO. FL145this profile priced per pair


pair


pair

Beading & Fluting Knives“Fluting”

“Beading”For other Beading or Fluting knives specify radius,

spacing, & number of beads or flutes.Priced on request.

CAT.NO. BD384this profile priced per pair

KN

IFE PRO

FILESCHAIR RAIL, BEADING, FLUTING


R

Base Mouldings & StopsBM100

priced per pair

CAT.NO.BM105

priced per pair

CAT.NO.BM110

priced per pair

BM111priced per

pair

BM112priced per

pair

CAT.NO.BM114

priced per pair

CAT.NO.BM103

priced per pair

Bead & Bullnose Knives Eighth Round Knives

R

.062

1st & 2nd pass

3rd & 4th pass

Radius CAT.NO. 1/8" BN100 /pr 3/32" BN100A/pr 3/16" BN101 /pr 1/4" BN102 /pr

Radius CAT.NO. 5/16" BN103 /pr 3/8" BN104 /pr 7/16" BN105 /pr 1/2" BN106 /pr 17/32" BN106A/pr 9/16" BN107 /pr 5/8" BN108 /pr 3/4" BN109 /pr 7/8" BN110 /pr 1" BN111 /pr

Bead Knives

Bullnose Knives with Flare

To produce larger Bullnoses

3/8"BM101

priced per pair7/16"

BM102priced per

pair1/2"

9/16"

CAT.NO.BM104

priced per pair5/8" 11/16"

3/8" 7/16" 9/16"

CAT.NO.BM113

priced per pair5/8" 11/16"

Radius CAT.NO. 1-1/4" BN165 /pr 1-1/2" BN170 /pr 1-3/4" BN175 /pr 2" BN200 /pr 2-1/4" BN225 /pr 2-1/2" BN250 /pr 2 3/4" BN275 /pr 3" BN300 /pr 3-1/2" BN350 /pr 4" BN400 /pr

KN

IFE

PRO

FILE

S EIGHTH ROUND, BULLNOSE, BEAD

NEW!

NEW!



T G

CAT.NO.P104T /prP104G /prP107T /pr*P107G /pr*

Paneling & Flooring Knives

Tongue & GrooveFor 3/4" and 1-1/2" material

P104 makes 1/4" x 1/4" Tongue and GrooveP107 makes 1/2" x 7/16" Tongue and Groove

* Loose fitting for ease of assembly

CAT.NO. Tongue(Groove) P100T for 3/8-7/16" V-Paneling /pr P100G for 3/8-7/16" V-Paneling /pr P102T for 3/4" V-Paneling /pr P102G for 3/4" V-Paneling /pr P103T for WP-4 Standard /pr P103G for WP-4 Standard /pr P106T for 1-1/2" V-Paneling /pr P106G for 1-1/2" V-Paneling /pr

L R

T

CAT.NO.H100R /prH100L /prH100T /pr

L RCAT.NO.H101R /prH101L /pr

CAT.NO.P115 /pr

T

L RCAT.NO.H102R /prH102L /prH102T /pr

T G

V-Panels

T G

Flooring KnivesIndustry Standard with Nail GrooveAlso available from stock in carbide tipped

and for the XL Moulder.

B

CAT.NO.T= Tongue Side P105T /prG= Groove Side P105G /prB= Backout for 2-1/4" Flooring P116 /pr

KN

IFE PRO

FILES

Hand RailsHAND RAILS, PANELING, FLOORING


Victorian Casing KnivesTo match our standard rosette profiles

CAT.NO.180C

priced per pair

CAT.NO.181C

priced per pair

CAT.NO.182C

priced per pair

CAT.NO.183C

priced per pair

Custom knives are a specialty of the Charles G. G. Schmidt & Company. Send us a sketch by mail, by fax machine or a DXF file by e-mail. Our e-mail address is [email protected]. By using our diagram below let us know which heads will be doing the profiling. Specify 60° or 90° corrugations.

45 L

45 R

Angle & Backout Knives38L

52R

CAT.NO. CBA38R /pr CBA38L /pr WHA38L /prCBA52R /pr WHA52R /prCBA52L /pr

CAT.NO. CBA45R /pr WHA45R /prCBA45L /pr WHA45L /pr

Adjustable Backout Knives

WH CAT.NO. CB CAT.NO. Size WHA100 /pr CBA100 /pr 1-1/8" - 2"WHA101 /pr CBA101 /pr 1-3/4" - 3-1/8"

Custom Knives Also Available

Top

Bottom

Left Infeed End of Moulder Right

Pickwick for V-Panel

CAT.NO.PKWIK

priced per pair

KN

IFE

PRO

FILE

S BACKOUT, CASING, CUSTOM



For 3/4" Spindles15° cutting angle. 3/4" Max depth of cut.Length

2"3"

Diameter2-3/4"2-3/4"

CAT. NO.MH222P6MH223P6

For 1" Spindles20° cutting angle. 1" Max depth of cut.

Length2"3"4"

Diameter3-1/2"3-1/2"3-1/2"

CAT. NO.MH232P6MH233P6MH234P6

2 AND 4 KNIFE CUTTER HEADS FOR 1-1/4" SPINDLESFor Large Shapers & Small Moulders• 4" Diameter • Available in 16-60° or **16-90° corrugations• Uses 1/4", 5/16", 3/8" or 10mm corrugated steel• 1-1/2" Max. depth of cut** Using 3/8" thick steel

Pin Holes for XL and 645 moulders in 4" diameter heads on this page are an additional charge. See price list CAT NO. MH809

Knives are additional.Allen wrench

supplied with pocket type Heads.

2 Knife Pocket Type20° cutting angle

Length1"2"3"4"5"6"

Diameter4"4"4"4"4"4"

CAT. NO.MH201PMH202PMH203PMH204PMH205PMH206P

4 Knife Pocket Type 20° cutting angle

Length2"3"4"5"6"

Diameter4"4"4"4"4"

CAT. NO.MH100PMH102PMH103PMH105PMH106P

** Heads ordered with16-90° corrugations subject to additional

charge, see price list. CAT NO. MH1690

Shaper Heads for Williams and Hussey knives. 23° Cutting Angle

Length4"4"6"6"

Diameter4"

4-13/16"4"

4-13/16"

CAT. NO.WH404

WH404HWH406

WH406H

Now you can use our knives made for the Williams and Hussey moulder on a shaper or moulder using one of these heads. Holes in knives must be able to accept 3/8" bolts. 4" heads made with 1-1/4" bore. 4-13/16" heads made with 1-1/2" or 40mm bore. Please specify size when ordering. Heads with larger bores quoted on request.

W&H SHAPER HEADS STANDARD COPING DISCSHeads are weight relieved, have a 25° cutting angle for a cleaner cut, are 3/4" thick and have 60° corrugations. Two can be used together with spacer to produce tenons. Custom heads also made to your machines specifications.

2 KNIFE CORRUGATED CUTTER HEADS The Junior Line for 3/4" & 1" Spindles• Available in 16-60° corrugations. • Designed to use the same 1/4" & 5/16" thick corrugated steel as our larger cutter heads. 4 knife heads available for special applications.

CU

TTER H

EAD

S2 & 4 KNIFE, W&H, COPING HEADS

DESCRIPTIONSMH780MH781MH785MH786MH790MH791

CAT. NO.7" OD x 1-1/4" ID 4 knife7" OD x 1-1/4" ID 6 knife8" OD x 1-1/4" ID 4 knife8" OD x 1-1/4" ID 6 knife9" OD x 1-1/4" ID 4 knife9" OD x 1-1/4" ID 6 knife


6" (150mm) diameterHydro-Lock Moulder Heads

Length50mm

100mm150mm180mm230mm

4 KnifeCAT. NO.MH405MH410MH415MH418MH423

6 KnifeCAT. NO.MH605MH610MH615MH618MH623

Supplied with 15° cutting angle and 16-60° corrugations. Specify 1-1/2", 40mm,1-13/16" or 2-1/8" bore when ordering.

Custom heads made to your specifications. Call for pricing and delivery time.

GREASE GUNS AND GREASE

4-13/16" (122mm) diameter Straight Bore forWeinig, Wadkin, SCMI & similar machines.

5-3/8" (137mm) diameter Straight Bore

Length50mm100mm150mm180mm230mm

4 KnifeCAT. NO.MH461MH462

MH462AMH463MH464

Supplied with a 22° cutting angle, 16-60° corrugations and a 1-13/16" bore.

6" (150mm) diameterwith open-end self-centering sleeves

Length2-1/4"

4"6"

4 KnifeCAT. NO.MH672 MH674MH676

6 KnifeCAT. NO.MH682MH684MH686

Supplied with hex nut, 15° cutting angle and 16-60° corrugations. Specify 1-13/16" or 2-1/8" bore and direction of rotation when ordering.

All heads are supplied with pocket style gibs. Knives are additional. We carry a complete line of HSK Integrated Heads for today's high speed moulders. Ask us for our brochure.

Supplied with 16-60° corrugations and use 1/4", 5/16" , 3/8" or 10mm thick steel.2 knife and 4 knife heads come with 15° cutting angle. Dual angle heads have 12° and 20° cutting angles. Specify 1-1/2" or 40mm bore when ordering. Add M to end of part number for 40mm bore. Supplied with 1-1/2" if not specified.

Grease fittings (2) are installed on ends

unless specified.Recommended

safety locking rings are available.

MH820CAT. NO.

Grease Gun for Hydro-Lock headsGrease Gun Rebuilding Kit

Grease for Hydro-Lock heads -per tube

CAT. NO.MH816

MH816AMH817A

STANDARD MOULDER HEADSFor American, European and Japanese Machines.

CU

TTER

HEA

DS STANDARD MOULDER HEADS

Supplied with 15° cutting angle and 16-60° corrugations. Specify 1-13/16" or 2-1/8" bore when ordering.

6" (150mm) diameter x 2-1/8" or 1-13/16" straight bore

Length2-1/4"

4"6"

4 KnifeCAT. NO.MH642 MH644MH646

6 KnifeCAT. NO.MH662MH664MH666

Length2-1/4"

4"5"6"7"8"9"

2 KnifeCAT. NO.MH4422MH4442MH4452MH4462MH4472MH4482MH4492

4 KnifeCAT. NO.MH442MH444MH445MH446MH447MH448MH449

Dual AngleCAT. NO.MH442DMH444DMH445DMH446DMH447DMH448DMH449D

NEW!



INNOVATORSTHE INNOVATORSMultiprofile Corrugated Back Panel Raising Cutters

QC100CAT.NO.

This tool is a must for custom cabinet, millwork and furniture shops.The Innovator and Innovator Jr. are two of our most popular tools. They combine the convenience and economy of 5/16" thick corrugated steel with a pocket design that can safely produce panel profiles up to 2" deep. Both sizes using the same pocket design can use either 5/16" thick, 60° corrugated back steel knives or the new 10mm

“SCHure • Lock" carbide knife system. With today’s use of MDF and other composite materials, the use of carbide is a must, and the Innovators allow anyone capable of grinding carbide knives to produce their own 3 wing carbide panel raising cutters. They can be used with or without ball bearing rub collars.Please specify Innovator or Innovator Jr. and direction of rotation when ordering. Other sizes quoted on request. Blank steel knives are available in sets of 3 for custom grinding your own profiles.

Standard Profiles for the Innovator. Sold in sets of 3. Stocked in high speed steel and SCHure • Lock carbide knives

Please specify clockwise or counter clockwise rotation and if cutter is over the wood or under the wood.

MATCHING BALL BEARINGSAC106 1-5/8" OD x 3/4" boreAC111 2-1/2" OD x 1-1/4 bore

INNOVATORS5 1/8" cutting circle x 3/4" bore Innovator Jr.

6" cutting circle x 1-1/4" bore Innovator

CAT. NO.QC601QC602

3/4"

QC100SLCAT.NO.

3/4"

QC101CAT.NO.

QC101SLCAT.NO.

3/4"

QC102CAT.NO.

QC102SLCAT.NO.

3/4"

QC105CAT.NO.

QC105SLCAT.NO.

5/8"

QC202CAT.NO.

QC202SLCAT.NO.

5/8"

QC205CAT.NO.

QC205SLCAT.NO.

5/8"

QC204CAT.NO.

QC204SLCAT.NO.

5/8"

QC201CAT.NO.

QC201SLCAT.NO.

3/4"

QC104CAT.NO.

QC104SLCAT.NO.

3/4"

QC103CAT.NO.

QC103SLCAT.NO.

5/8"

QC200CAT.NO.

QC200SLCAT.NO.

5/8"

QC203CAT.NO.

QC203SLCAT.NO.

INN

OVA

TOR

S

BLANK KNIVESSIZE

M2HSS .865" X 2" X 5/16" (3)SCHure Lock .865" X 2" X 10mm (3)

CAT. NO.QC300

QC300SL


ROSETTES

Our 2 knife Corrugated Back Rosette tool holders are designed to produce quality rosettes or plinth blocks on low rpm machines such as drill presses, lathes or (bridgeport type) milling machines. They are available in three diameters and three shank sizes: 1/2", 3/4", #2 morse taper. A 1/2" or 3/4" shank is included with the tool. The #2 morse taper shank is an additional charge. See price list. Please specify when ordering CAT NO. AC820#2Blank knives are available for custom grinding your own profiles. For mass production of rosettes, ask about our Automatic Rosette Machines. See page 46Carbide and S-Alloy tipped brazed cutters are also available. Call for pricing.

* 3/4" or #2 Morse Taper shanks only.

MULTIPROFILE ROSETTE CUTTERS2 wing Rosette cutter uses 1/4" thick 16-60° corrugated steel. For use on slow rpm machines.

3-3/8"

CB180RCAT.NO.

2-3/4"

CB181RCAT.NO.

3-1/4"

CB182RCAT.NO.

3-1/4"

CB183RCAT.NO.

2-1/4"

CB184RCAT.NO.

2-7/16"

CB186RCAT.NO.

2-1/4"

CB185RCAT.NO.

2-1/4"

CB187RCAT.NO.

Standard Profiles for Rosette Tool Holders. Sold in sets of 2. Catalog numbers shown are for Steel Knives.Please specify head size when ordering.

RO

SETT

ES

ROSETTE CUTTERS2-7/8" Diameter3-1/2" Diameter4-3/4" Diameter*

TOOL HOLDERCAT. NO.

AC818AC819AC821

BLANK KNIVESCAT. NO.

CB189CB190CB191

CUSTOM KNIVESCAT. NO.CB189PCB190PCB191P



Replacement steel spurs and tenon knives can be made to your drawing or sample.Our expert service department is capable of sharpening and resetting knives and spurs for like-new performance on just about any type of tenon head.

Charles G. G. Schmidt & Co. offers a wide range of tooling for most types of single anddouble end tenoners. From the smallest to the largest, we have the expertise to equip your machine with the best kinds of tools for your application. Most of our tenoner tooling is custom made.

REPLACEMENT PARTSFor Powermatic 2-A single end tenonerWe stock replacement Heads, Tenon Knives, Spurs, Cope Heads and Cope Knives for the 2-A. We also carry a thread-ed adapter enabling wing cutters to be used on the cope spindles. Our service department is available to set up new and existing heads for a nominal charge.

Pictured here is a small sampling of the types of cope tool-ing available from Schmidt. Let us grind knives for your stock heads or switch to corrugated heads for easier setups. For lon-ger runs and quick set up time, consider ground to pattern wing cutters in S-alloy or carbide.

COPING HEADSCustom Heads and Knives

Carbide tipped staggered tooth heads can be made either single sided (pictured) or revers-ible (with 2 blades). Staggered design, permits smooth cuts, faster feed rates and

out-lasts original heads with steel knives and spurs. For a quote on new tenon heads specify: • Maximum cutting circle • R.P.M. • Maximum tenon length • Feed rate • Spindle diameter • Rotation • Mounting method

TENONING

SPUR KNIVES

CAT. NO.

* This is a new type of head for Powermatic 2A Single End Tenoner. It uses corrugated steel rather than knives with closed slots. 5/8"-11 thread, 60° corrugations. Specify top or bottom.

DESCRIPTIONSPM100PM105PM110 PM115 PM120PM121 PM125 PM200

A discontinued Tenon Head see new Insert versionB Tenon Knives PM100 requires (2)C 3/4" Spurs PM100 requires (2)D Cope Knives (straight)E 2 Knife Cope Head without knivesF 2 Knife Corrugated Back Cope Head *Threaded Adapter for 1-1/4" boreAssembly Service (includes setting knives and sharpening)

TOOLING, POWERMATIC HEADS

Phot

o co

urte

sy o

f Pow

erm

atic

E

A

B

C D

Update your Powermatic with Insert Tenon HeadsPOWERMATIC TENONER HEADS - 2A

PM250T for topCAT. NO.

PM250B for bottomCAT. NO.

Hollow mortising chisels and bits available. See page 32

TENO

NER

TOO

LING

FNEW!

NEW!

DESCRIPTIONS CAT. NO.Replacement Insert INKS415

Replacement Insert Screw INKS415SReplacement Spur INKS414

Replacement Spur Screw INKS414SInsert Torx Wrench INKS415TWSpur Torx Wrench INKS414TW

4" diameter x 3" cel X 1 3/16" bore 6 row, 3 spur. Please specify top or bottom when ordering.


SUR

FAC

ING

HEA

DS MORTISING, SURFACING HEADS

HOLLOW MORTISING CHISELS & BITSOur chisels and bits are made from the finest quality tool steels. Requiring less horsepower, these extremely sharp tools produce extra clean cuts in hard and soft woods. Single flute design for efficient chip removal. Chisels and bits sold separately.

CAT. NO.SIZE x SHANK DIAMETER

MORTISE DEPTH

OVERALL LENGTH

HMC250CHMC313CHMC375CHMC500CHMC625CHMC750CHMC1000C

1 7/8"1 7/8"

3"3"3"3"3"

4 1/4"4 1/4"5 1/2"5 1/2"5 1/2"7 1/2"7 1/2"

1/4" X 5/8"5/16" X 5/8"3/8" X 5/8"1/2" X 5/8"5/8" X 3/4"

3/4" X 1 1/8"1" X 1 1/8"

CHISELS

CAT. NO.BIT DIAMETER

SHANK DIAMETER

MORTISE DEPTH

OVERALL LENGTH

HMC250BHMC313BHMC375BHMC500BHMC625BHMC750B

HMC1000B

3/16"7/32" 9/32" 3/8"1/2"1/2"1/2"

1 7/8"1 7/8"

3"3"3"3"3"

9 1/2"9 1/2"8 1/2"8 1/2"9 1/2"

11"11"

1/4"5/16"3/8"1/2"5/8"3/4"1"

BITS

PROFILING HEADSOur profiling heads are another economical way of using standard carbide inserts for a profiling / shaping operation. Available in 5 standard widths. For pattern shaping use bearing AC117. Made with 1-1/4" bore. Bushings available for other sizes. See page 8.

• Always maintains same diameter. • Change knives right on the machine.• Four sided carbide knives. Replacement insert CAT NO. INKS415 See page 37.

T-20 TORX WRENCH CAT NO. INKS415TW

REPLACEMENT INSERT SCREW

HELPFUL INFORMATION FOR ALL WOODWORKERS

2 Wing, 4 Row Profiling HeadsLength Diameter CAT. NO. Replacement insert Inserts per head

2" 4" IN402 INKS415 103" 4" IN403 INKS415 144" 4" IN404 INKS415 185" 4" IN405 INKS415 226" 4" IN406 INKS415 26

NEW!

CAT NO. IN415S

Two sizes of rectangular mortising chisels and bits are available. 3/8" x 9/16 Cat No. HMC375X562 and 3/8" x 5/8".Cat No. HMC375X625 Sold in sets only.

Cabinet Doors and DrawersYour complete how-to reference! Virtually every door and drawer variation that a cabinetmaker is likely to encounter is addressed and explained in this comprehensive guide. Designed to provide tips for both the professional woodworker and the hobbyist. Covers construction of all types of cabi-net doors and drawers, extensive, full color gallery of door and drawer styles, extensive coverage of door and drawer hardware and installation, pocket doors,

coopered doors, edge banding, veneer work, metal drawers, and much more.

NEW!More Manuals and Books We have more books and manuals to make your life as a professional woodworker easier and more profitable. From knife grinding, wood bending, circular woodwork, how to use a shaper, building stairs, identifyingstandard mouldings and making mantles. See pages 8 & 9 for the complete list.

AC418CAT. NO.



Features• Made with Straight Bore or Hydro-Lock Mounting System*• Special Light Weight Aluminum body.• Large gullets for efficient chip removal.• Can be used in a roughing or finishing application. ( Ask for details )• Inserts can be re-sharpened.* Grease gun available. Cat No. MH816

SCHure-CUT - TRUE HELICAL CARBIDE INSERT SURFACING HEADFor Quieter, Smoother and Cleaner Surfacing, nothing cuts like our new SCHure-Cut Insert Heads. Milled and ground on the latest state of the art CNC machinery, this new patented cutter head is designed to reduce noise and produce a superior surface finish and give you the convenience of insert tooling.

Inserts per wing

479101216

Hydro-Lock Bore 4 winglength60mm100mm130mm150mm180mm230mm

137mmdiameterCAT. NO.

N/AN/AN/AN/AN/AN/A

163mmdiameterCAT. NO.SH4306HSH4310HSH4313HSH4315HSH4318HSH4323H



Inserts per wing

479101216

Straight Bore 4 winglength60mm100mm130mm150mm180mm230mm

137mmdiameterCAT. NO.SH4106SH4110SH4113SH4115SH4118SH4123


QUOTEDON

REQUEST

150mmdiameterCAT. NO.SH4206SH4210SH4213SH4215SH4218SH4223


QUOTEDON

REQUEST

Extra (replacement insert)

SHTIPSCAT. NO.

Replacement Screw

SHSCREWCAT. NO.

Tested against two popular surfacing tools, research shows that the new SCHure-Cut Head is the quietest surfacing head you can put on your moulder. Plus the slicing action of the True Helical cutting edge produces an extremely smooth finish. Test cut was 3/32" deep, 100fpm, 4" wide, 6000 rpm. 3 wing and 6 wing heads also available.

See price list for reduced

prices onall of our

SCHure-Cut Heads.

SUR

FAC

ING

HEA

DS

SCHure-CUT


SURFACING & TENONSURFACING HEADSMade from aircraft aluminum, these heads are an excellent way to reduce noise and horsepower needed in your moulding operation. They use solid carbide 4 sided inserts mounted in a staggered, spiral pattern which in most cases, depending on the machinery, can produce a line free finish. Inserts can be replaced or rotated on or off the machine. Feed speeds can also be increased due to the reduced cutting pressure. Can also be made for profiling and pattern shaping. Please specify bore size when ordering. Diameter always stays the same requiring minimal set up time. Made with either straight or hydro-Lock bores. Effective number of cutting teeth is half the number of wings.

TENON HEADS

Made from aircraft aluminum these convenient to use insert tenon heads can be made for any single or double end tenoner. Staggered tooth design makes less noise and requires less horsepower. Four sided solid carbide inserts and spurs are rotated as they become dull. Set screw mounting is available. Effective number of cutting teeth is half the number of wings.Please specify bore size when ordering.

• Lightweight• No need to send out for sharpening• Easy to use• Diameter always stays the same• Minimal set up time

Pictured with Hydro-Lock bores

Replacement Insert see page 37

INKS415CAT. NO.

Replacement Insert Screw

INKS415SCAT. NO.

StraightBore

HydroBore

DIA.# OF

WINGS# OF

TEETH666444666444666

243036162048243060162048243060

LENGTH4"4"4"5"5"5"5"5"5"6"6"6"6"6"6"

4"5"6"4"6"9"4"6"9"4"6"9"4"6"9"

CAT. NO.IN650IN651IN652IN653IN654IN655IN656IN657IN658IN659IN660IN661IN662IN663IN664

CAT. NO.N/A N/A N/A N/AN/AN/AN/AN/AN/A

IN659HIN660HIN661HIN662HIN663HIN664H

Replacement Spur

INKS414CAT. NO.

Replacement Spur Screw

INKS414SCAT. NO.

Replacement Insert

INKS415CAT. NO.

Replacement Insert Screw

INKS415SCAT. NO.

INSE

RT

HEA

DS

4" CUTTINGEDGE

3" CUTTINGEDGE

# of SPURS3334

2" CUTTINGEDGE

Diameter4" - 5"5" - 6"6" - 7"

8"

# of WINGS6668

CAT. NO.IN600BIN601BIN602BIN603B

CAT. NO.IN600AIN601AIN602AIN603A

CAT. NO.IN600CIN601CIN602CIN603C

Insert Torx Wrench CAT NO. INKS415TW Spur Torx Wrench CAT NO. INKS414TW

T-20 TORX WRENCH

INKS415TWCAT. NO.



REBATING, ADJUSTABLE GROOVER & ANGLE

ADJUSTABLE GROOVERS

ADJUSTABLE ANGLE CUTTER

Replacement Knives50mm Straight Knife14mm x 14mm Spur

CAT. NO.INKS250INKS414

These cutters are ideal for applications where constant diameter is important. The use of industry standard carbide inserts make this tool inexpensive and easy to use. The spurs insure clean, smooth cuts, even in cross grain applications. They are an excellent choice for moulder side heads in straight cut (S4S) applications. Cutters are stocked in bore sizes listed. The * indicates these tools can be bored or manufactured with other bore sizes for a nominal charge.

ADJUSTABLE WIDTHOur adjustable groovers come complete with spurs for smooth cutting with and across the grain. Spacers supplied with the tool allow for fine adjustment of grooves up to 1-1/4" deep. Depth varies from 1-1/4" to 1-3/8."

BEARINGAC114AAC116BAC125

LENGTH50mm50mm50mm

SPURS444

CAT. NO.IS58085IS58100IS58125

BORE 1-1/4"1-1/4"1-1/4"

KNIVES222

DIAMETER85mm

100mm125mm*

This is the most versatile indexible angle cutter available. Infinitely adjustable using an allen key from -90° to +90° with a vernier scale for accu-rate adjustment. This unit uses standard 50mm double sided solid carbide inserts,

CAT NO. INKS250 (See page 37).

SPURS NO.INKS410INKS414INKS414INKS414INKS414

INSERT NO.INKS418INKS207INKS412INKS215INKS220

CAT. NO.IG660IG662IG664IG666IG668

MIN-MAX CUT4mm to 7.5mm8mm to 15mm

12.5mm to 24mm16mm to 30mm21mm to 39mm

BORE 1-1/4"1-1/4"1-1/4"1-1/4"1-1/4"

INSERTS84444

SPURS44444

DIA.180mm160mm160mm160mm160mm

CAT. NO.IT35160

KERF50mm

BORE 1-1/4"

KNIVES2

INSERTINKS250

DIAMETER160mm

INSER

T HEA

DS

CAT. NO.IS1255IS1253

IS1255AIS1255B

KERF50mm30mm50mm50mm

BORE 40mm40mm1-1/2"

1-13/16"

KNIVES4444

INSERTINKS250INKS230INKS250INKS250

DIAMETER125mm125mm125mm125mm

STACKABLE SURFACING HEADS

CAT NO.IS1265IS1263

Replacement Gib Screw CAT NO. IS125S

ReplacementGib

Our Stackable heads are another economical way of using standard carbide inserts for a surfacing operation. Available in 30mm and 50mm widths these heads stack on the arbor to the desired length. • Always maintains same diameter. • Change knives right on the machine.• Double sided carbide knives.• For horizontal or vertical heads.


DEDICATED INSERT AND FLOORING CUTTERS

DEDICATED heads are ideal for patterns which incorporate a tongue and groove detail. Knife inserts are supported completely by the profiled body of the tool and no additional backing plates are required. Standard gibs are included but profiled gibs are recommended for stile and rail knives.

length40mm60mm40mm60mm40mm60mm40mm60mm

Diameter5.25" Lg, 3.875" Sm.5.25" Lg, 3.875" Sm.

6.250" Lg, 5" Sm.6.250" Lg, 5" Sm. 7.250" Lg, 6" Sm.7.250" Lg, 6" Sm. 8.250" Lg, 7" Sm.8.250" Lg, 7" Sm.

3 Knife str. bore

CAT.NO.ID430ID431ID432ID433ID434ID435ID436ID437

3 Knife hydro

CAT.NO.ID430HID431HID432HID433HID434HID435HID436HID437H

4 Knife str. bore

CAT.NO.N/AN/A

ID442ID443ID444ID445ID446ID447

4 Knife hydro

CAT.NO.N/AN/A

ID442HID443HID444HID445HID446HID447H

Dedicated Heads

FLOORING CUTTERS

3/4"1/4"

1/32"

STANDARD WOOD PROFILE IC240CAT. NO.

Use our standard 6" diameter, 60mm wide, three knife dedicated head, CAT NO. ID8240 with your choice of bore depending on the machine. Our universal insert is ground with both profiles, a total of four cutting on the same insert. See picture. In moulder applications all four patterns can be used without adjusting spindle heights. Run up to 100,000 ft. of flooring with one set of inserts. Made from impact resistant carbide. These heads can be designed to match existing profiles.

INSE

RT

HEA

DS

NEW!

Our insert heads will save you money and time in applications where consistent profiles are needed over very long runs, and in abrasive man-made materials. There is no need for extra cutters, and down time is minimized because of the accuracy and repeatability of our inserts. Available in C4 carbide, these knives,

made to industry standards, are always readily available and will last many times longer than comparable brazed tooling. Depending on width and depth of profile, multiple cutting edges can be put on an insert, making them even more economical.

When purchased with head. CAT NO. IPG100

When purchased separately for an existing head. CAT NO. IPG101

See page 37 for insert styles.



SOLID CARBIDE INDEXIBLE & PROFILED

CAT. NO.

IC642DSIC642DO

Carbide Profiled InsertsCAT. NO.

IC430DSIC430DO

CAT. NO.

IC635DSIC635DOIC435SSIC435SOIC435DSIC435DO

30mm 35mm 40mm 42.87mmCutting Edge Width

60mm ss (simple)60mm ss (fitted)

60mm ds (simple)60mm ds (fitted)

40mm ss (simple)40mm ss (fitted)

40mm ds (simple)40mm ds (fitted)

CAT. NO.IC640SSIC640SO

SOLID CARBIDE INDEXIBLE INSERTS TURNABLE STRAIGHT KNIVES

35°

30°

C

C

S2

S4 B

A

A

B

All inserts have a hole size of 4.0mm, except INKS414, which has a hole size of 6.5mm with chamfer.

SOLID CARBIDE PROFILED INSERTSPROFILED inserts are available in a variety of sizes. See chart for complete selection.

Indexable inserts are available in a variety of sizes. See chart for complete selection.KVS/PKG

22101010101010101010

A B C 1/4" x 12 x 1.5mm1/2" x 12 x 1.5mm 7.65 x 12 x 1.5mm

12 x 12 x 1.5mm15 x 12 x 1.5mm20 x 12 x 1.5mm30 x 12 x 1.5mm40 x 12 x 1.5mm50 x 12 x 1.5mm14 x 14 x 2.0mm15 x 15 x 2.5mm

CAT.NO.INKS202INKS205INKS207INKS412INKS215INKS220INKS230INKS240INKS250INKS414INKS415

STYLES2 S2 S2S4S2S2S2S2S2S4S4

Pricing carbide inserts for our heads can be done using this chart. Determine the insert size by fitting your profile on the inserts below. Determine if your insert will have 1, 2, or 4 profiles, and whether its a simple or a fitted shape to manufacture and match a number to that size insert. Add the cost of backing plates and profiled gibs if needed.

40

35

60

42.87

40

30

60

40

40

35

60

35

60mm x 40mm Single Sided insertMaximum Width = 52mm/2.047"Maximum Depth = 20mm/.787"

40mm x 35mm Single Sided insertMaximum Width = 32mm/1.259"Maximum Depth = 15mm/.590"

60mm x 42.87mm Double Sided insertMaximum Width = 52mm/2.047"Maximum Depth = 14mm/.562"

40mm x 30mm Double Sided insertMaximum Width = 32mm/1.259"Maximum Depth = 10mm/.375"



ds= double sided ss= single sided Maximum depth of cut for a double sided insert is .562". Maximum depth of cut for the largest single sided insert is .787".

profile areaprofile area

profile area

profile area

profile area

profile area profile area

profile area

profile area

profile area

CA

RB

IDE IN

SERTS

* Minimum quantity 6 pieces per profile


PANEL RAISINGOur new Dual Profile Panel Raising Cutters are each made to support and cut two different patterns. Three body contours, 6 wood profiles available. 6" diameter, 1-1/4" bore, 15° hook, 10° shear. A 2-1/2" bearing (CAT.NO. AC111) is used for pattern shaping. C-4 carbide inserts stand up to today’s tough to cut materials. Standard rotation in counter clockwise rotation cutting over the wood. Order body for corresponding insert. Inserts not included in body price. Precision machined and ground on the latest CNC equipment. Replacement Insert Screw

PANEL CRAFTER 609Riding on a cushion of air this fixture allows the user complete control when shaping the parts for raised panel doors. Whether you’re shaping the panels or the rails, your parts are automatically centered and held securely in this 47 pound unit. Moving this fix-ture requires very little effort as there is virtually no drag due to the .002/.003 cushion of air. Comes with a complete set of Independence style templates. Additional templates are also available at additional cost. Call us for a list of templates.

CAT. NO.AC830

DESCRIPTIONPanel Crafter

• Air pressure required 85 PSI• Capacity: Max 2" thick X 24" wide• Made from aircraft aluminum• Can be used for coping• Built with safety in mindOther “Crafter" units for coping and doors up to 36" wide can be special ordered.

INSE

RT

CU

TTER

S

IC210SRCAT. NO.

5/8"

3/8"1-3/8"

3/8" raise above tongueIC21138CAT. NO.

IC211BBODY NO.

3/8"1-3/8"

3/4"

1/2" raise above tongue IC211CAT. NO.

IC211BBODY NO.

5/8"

3/8"1-3/8"


IC210BBODY NO.

3/8"1-3/8"

1/2"


IC210BBODY NO.

3/8"

5/8"

1-3/8"1/2"


IC213BBODY NO.

3/8"

5°3/4"

1-3/8"

3/4"R


IC213BBODY NO.

NEW!



INSERT STILE AND RAILUsing ONLY Two 3-Wing Steel BodiesYou Can Cut Any of These Six Profiles with Our new Insert Stile and Rail Cutters for Cabinet Doors

To order carbide inserts add the letter “C" to the end of the insert part number. Example ISR40SCTo order S-Alloy inserts add the letter “S" to the end of the insert part number. Example ISR40SS

Stile head Rail head

PROFILE NO. ISR10Stile Insert CAT NO. ISR10SRail Insert CAT N0. ISR10R

PROFILE NO. ISR40Stile Insert CAT NO. ISR40SRail Insert CAT NO. ISR40R

Manufactured to precision tolerances, these alloy steel bodies can accommodate any of the six profiles shown without backer plates. Using the stile cutter to cut the pattern cuts and the rail cutter to cut the cope cut, these cutters produce a perfect fit every time. All inserts are ground to same center line for ease of set up. Carbide or S-Alloy tips are available for cutting all types of woods and man made materials. All inserts are 30mm wide to accommodate material thicknesses from 3/4" to 1". Inserts are not included in cost of bodies. Cutters are made to run in a counter clockwise rotation with the wood face down. Sharpening of inserts is not recommended.

Custom profiles as per your request.

Cutter Specifications:• 4" Diameter • 20° Cutting angle• 1-1/4" Bore • 3 Wings• Black Oxide Finish• Body Thickness 30mm• 3" min. dia.. (Use bearing AC113)• Bushings for other bore sizes available





INSER

T CU

TTERS

ISRH10SCAT. NO.

ISRH10RCAT. NO.


ROUTER TOOLING / BORING BITS

Designed specifically to be used on CNC Routers capable of accepting 3/4" shafts, this tool allows the use of conventional corrugated knives on this type of machine. Most mill shops are already using corrugated steel somewhere in their shop whether on a shaper, tenoner or moulder. An inexpensive way to produce samples or small runs using steel knives or use our carbide knives for long production runs. We offer the complete system to get you up and running fast. Knives for both straight cuts and profiling are readily available. Clockwise and counterclockwise rotations available.

Specifications:• 2-1/2" Cutting circle • 15˚ cutting angle• Alloy Steel Construction • 2" cutting width• 3/4" Shaft • Cut up to 3/4" deep patterns• 1/4" and 5/16" thick corrugated knives • Recommended RPM 8,000 to 12,000 Max.

CORRUGATED BACK ROUTER HEAD AND KNIVES

V-GROOVE / 45° CHAMFER ROUTER BIT

ROUTER BIT ADAPTERS

CARBIDE TIPPED BORING BITS With shank adjusting screw. Additional sizes available. Call for prices.

Shank3/4"

Width25mm

InsertCAT. NO.IRC4012

Dia..50mm

ToolCAT. NO.

IR400

Designed for V-grooving and folding. Using a special insert with 15° bevels producing a perfect 90° angle. Can also be used to chamfer material up to 1" thick. 2 cutting edges per insert.

KNIVES FOR PROFILE CUTTING Sold in pairsSteel

CAT. NO.CB260CB265CB270

Pattern DepthMax. 1/4"Max. 1/2"Max. 3/4"

DIMENSIONS2" x 1" x 5/16"

2" x 1-1/4" x 5/16"2" x 1-1/2" x 5/16"

CarbideCAT. NO.

CT260CT265CT270

SteelCAT. NO.

CB155DIMENSIONS

2" x 7/8" x 5/16"

CarbideCAT. NO.

CT155

KNIVES FOR STRAIGHT CUTTING Sold in pairs

Brad Point (Dowel) designed for chip free boring for shelf pins and dowels, etc.

60° Point for Thru Bores. V-Point drill designedto eliminate chip out on double sided material.

Diameter Length 5mm 57mm BBP055R BBP055L 5mm 70mm BBP057R BBP057L 8mm 57mm BBP085R BBP085L 8mm 70mm BBP087R BBP087L

CAT.NO. RH CAT. NO. LH

Diameter Length 5mm 57mm BBT055R BBT055L 5mm 70mm BBT057R BBT057L 8mm 57mm BBT085R BBT085L 8mm 70mm BBT087R BBT087L

CAT.NO. RH CAT. NO. LH

Turn your shaper into a router with our router bit adapters, made for Delta light and heavy duty shapers and Powermatic #26. For router bits with 1/2" and 1/4" shanks.

ADAPTERSPowermatic router bit adapter w/split sleeveDelta HD router bit adapter w/split sleeveDelta LD router bit adapter w/split sleeveSplit sleeve for 1/4" bits

CAT. NO. AC300 AC301**AC302 AC303

**Requires false table to lower bit below table height. Not for use on Platinum series machines

BO

RIN

G B

ITS

Hinge Boring Bitwith Center Point Diameter Length35mm 57mm

CAT. NO. BHB0035

RH100 CWCAT.NO.

RH101 CCNEW!

RH100



SOLID CARBIDE ROUTER BITS

Schmidt is proud to introduce our new solid carbide spiral router bits. Our bits are precision ground to high tolerances to produce an excellent cutting edge for a longer lasting tool life. We offer our bits in upcut, downcut and also compression style. We also carry solid carbide bits for template cutting machines.• Upcut - Designed for routing, grooving and slotting in both hard and soft woods, plastics, non porous material, and composites. Use where chips must be pulled toward shank. • Downcut - Designed to hold material down during templating and thru cutting.• Compression bits - Designed to produce a high quality finish on two sided material with minimal chipping.• Ruffer - Designed to allow for extremely fast hogging in solid wood and wood composites.• Sharpening available for a fraction of the cost of new bits with minimal diameter loss.

COMPRESSION SPIRAL SINGLE FLUTE ROUTER BITSCUTTING

DIA.1/4"3/8"1/2"1/2"3/4"

SHANKSIZE1/4"3/8"1/2"1/2"3/4"

CUTTINGLENGTH

1"1-1/4"1-1/4"1-1/2"2-1/8"

OAL 2-1/2"

3"3"

3-1/2"4"

CAT. NO. RS206RS208RS210RS211RS216

SOLID CARBIDE SPIRAL ROUTER BITS

SHANKDIA. 3/8"1/2"1/2"5/8"3/4"

FLUTELENGTH

1-1/4"1-1/2"2-1/8"2-1/8"2-1/8"

CUTTINGDIA.3/8"1/2"1/2"5/8"3/4"

OAL 3"

3-1/2"4"4"4"

UPCUT

CAT. NO. RS501URS502URS503URS504URS505U

DOWNCUT

CAT. NO. RS501DRS502DRS503DRS504DRS505D

THREE FLUTE UPCUT OR DOWNCUT RUFFER

COMPRESSION SPIRAL DOUBLE FLUTE ROUTER BITSCUTTING

DIA.1/4"3/8"1/2"1/2"1/2"5/8"3/4"

SHANKSIZE1/4"3/8"1/2"1/2"1/2"5/8"3/4"

CUTTINGLENGTH

1"1-1/4"1-1/4"1-1/2"

2"1-5/8"2-1/8"

OAL 2-1/2"

3"3"

3-1/2"4"4"4"

CAT. NO.RS308RS309RS310RS311RS312RS313RS316

Custom Router Bits have always been a specialty for the toolmakers at Charles G. G. Schmidt & Company. Whether you need to do a custom hand rail, cabinet stiles and rails or just a unique door edge, we can make the bit you need. Send us a sketch, wood sample or DXF file and we will design and manufacture the tool to your specifications with carbide, S-Alloy or diamond tips. Ask us about custom router bits, both brazed and insert styles for your CNC router. We can also supply collets and tool holders.

SOLID

CA

RB

IDE R

OU

TER

CUTTINGDIA.

1/16"*1/8"*1/8"5/32"3/16"7/32"1/4"5/16"5/16"3/8"3/8"1/2"1/2"5/8"5/8"3/4"3/4"

SHANKSIZE 1/8"1/8"1/4"1/4"1/4"1/4"1/4"5/16"1/2"3/8"1/2"1/2"1/2"5/8"5/8"3/4"3/4"

CUTTINGLENGTH

3/16"1/2"1/2"1/2"3/4"3/4"1"1"1"1"

1-1/4"1-1/2"

2"1-5/8"2-1/8"1-5/8"2-1/8"

OAL 1-1/2"1-1/2"

2"2"

2-1/2"2"

2-1/2"3"3"

2-1/2"3"

3-1/2"4"4"4"4"4"

UPCUT

CAT. NO. RS101URS102URS103URS104URS105URS106URS107URS108URS109URS110URS111URS112URS113URS114URS115URS116URS117U

DOUBLE FLUTE UPCUT OR DOWNCUTDOWNCUT

CAT. NO. RS101DRS102DRS103DRS104DRS105DRS106DRS107DRS108DRS109DRS110DRS111DRS112DRS113DRS114DRS115DRS116DRS117D

COMPRESSION SPIRAL THREE FLUTE ROUTER BITSCUTTING

DIA.3/8"1/2"1/2"1/2"1/2"5/8"3/4"

SHANKSIZE3/8"1/2"1/2"1/2"1/2"5/8"3/4"

CUTTINGLENGTH

1-1/4"1-1/4"1-3/8"1-5/8"

2"2"2"

OAL 3"3"

3-1/2"4"4"4"4"

CAT. NO.RS401RS402RS403RS404RS405RS406RS407


RO

UTE

R B

ITS

DIAMOND TIPPED ROUTER BITS

Standard T-Slot PCD Router Bits

Our Polycrystalline Diamond Tooling will cut a wide variety of tough, abrasive materials including particleboard, medium density fiberboard (MDF), plywood and plastic. Up/down (compression) shear provides clean cuts on double-sided melamine panels while the cutting edge lasts up to 150 times longer than carbide. Diamond boring point allows for plunging straight down. What may seem expensive is really a way to save money. Your machine runs longer, you cut more parts and tool changes are much less frequent. Polycrystalline Diamond is the most economical choice. These tools can be resharpened 2 or 3 times.

DIAMOND TIPPED

Make slot wall fast and easy with our standard T-slot wall cutters. Constructed with large PCD tips to allow greater stability. Use with particleboard MDF, both raw or with melamine, veneer, hardwoods, etc. Two standard sizes to choose from. Right hand and left hand rotations available. 1/2" shanks. Custom sizes quoted on request.

CAT. NO.Cutting

DiameterNeck

DiameterCuttingLength

NeckLength

OverallLength

DT1090DT1095

3/8"1/2"

3/8"1/2"

2-3/8"2-3/8"

1/4"3/8"

1-1/4"1-3/8"

Standard PCD Router BitsCAT. NO.

Cutting Length

CuttingDiameter

ShankDiameter

OverallLength

1/2"1/2"1/2"1/2"5/8"5/8"5/8"3/4"3/4"3/4"3/4"3/4"1"1"1"1"1"

3"3"3"

3-1/2"3-1/2"3-1/2"3-1/2"

4"4"4"4"4"4"4"4"4"4"

3/8"1/2"1/2" 1/2" 5/8"5/8" 5/8" 3/4"3/4" 3/4" 3/4"3/4"1" 1"1"1"1"

3/4"3/4"1"

1-3/8"3/4"1"

1-3/8"3/4"1"

1-3/8"1-5/8"

2"3/4"1"

1-3/8"1-5/8"

2"

DT1003DDT1005DDT1010DDT1015DDT1020DDT1025DDT1030DDT1035DDT1040DDT1045DDT1050DDT1055DDT1060DDT1065DDT1070DDT1075DDT1080D

NEW!

NEW!



TOO

L HO

LDER

S

CAT.NO. Description D A F N Collet Nut WrenchTE06106W BT 30 x ER 20-70mm w/o slots 46 70 20 35 TE46120 TE04614TE06112 BT 30 x ER 32-60mm with slots 46 60 20 50 TE46132 TE04616TE06113W60 BT 30 x ER 32-60mm w/o slots 46 60 20 50 TE46132 TE04616TE06113W90 BT 30 x ER 32-90mm w/o slots 46 90 20 50 TE46132 TE04616TE06113 BT 30 x ER 20-70mm w/o slots 46 70 20 50 TE46132 TE04616TE06001W BT 30 x SYOZ 25-70mm w/o slots 46 70 20 60 Included TE03691TE06001 BT 30 x SYOZ 25-70mm 46 70 20 60 Included TE03691TE06010 BT 35 x SYOZ 25-76mm 53 76 22 60 Included TE03691TE061BT353276 BT 35 x ER 32-76mm 53 76 22 50 TE46132 TE04614

BT 30 & 35 TOOL HOLDERS FOR CNC ROUTERS Dimensions in millimeters

CAT.NO. Description D L N B GLTE41060 HSK 63F 1-1/4" arbor x 55mm 1-1/4" 55mm 42mm 20mm 45

TE410803H HSK 63F 1-1/4" arbor x 80mm 1-1/4" 80mm 42mm 20mm 45TE41085 HSK 63F 1-1/4" arbor x 100mm 1-1/4" 100mm 42mm 20mm 45TE41087 HSK 63F 1-1/4" arbor x 112mm 1-1/4" 112mm 42mm 20mm 45

HSK 63F Arbors

CAT.NO. Description L GL D B NTE1270040 ISO 30 1-1/4" x 40mm arbor 40mm 42mm 1-1/4" 20mm 42mm

TE1270055 ISO 30 1-1/4" x 55mm arbor 55mm 42mm 1-1/4" 20mm 42mmTE1270080 ISO 30 1-1/4" x 80mm arbor 80mm 42mm 1-1/4" 20mm 42mmTE12700100 ISO 30 1-1/4" x 100mm arbor 100mm 42mm 1-1/4" 20mm 42mm

ISO 30 Arbors

CAT.NO. Type D d1 d2 d3 L l1 l2 TTE07801 BT30 - 45̊ 16.5 11 7 12.5 43 23 18 M12TE07803 BT40 - 45̊ 23 15 10 17 60 35 28 M16TE07805 BT50 - 45̊ 38 23 17 25 85 45 35 M24TE07806 BT30 - 60̊ 16.5 11 7 12.5 43 23 18 M12TE07808 BT40 - 60̊ 23 15 10 17 60 35 28 M16TE07810 BT50 - 60̊ 38 23 17 25 85 45 35 M24TE07812 BT30 - 90̊ 16.5 11 7 12.5 43 23 8 M12TE07814 BT40 - 45̊ 23 15 10 17 35 35 28 M16

BT Shank Pull Studs Dimensions in Millimeters

TOOL HOLDERS & ARBORS FOR CNC

NEW!

NEW!

CAT.NO. Description D A F N Collet Nut WrenchTE40050 HSK 50 F X ER 32-80mm 50 80 26 50 TE46132 TE04616TE17105008001 HSK 63 F X ER 16-60mm 63 60 26 32 TE46116 TE04613TE17105008002 HSK 63 F X ER 16-100mm 63 100 26 32 TE46116 TE04613TE30000 HSK 63 F X ER 32-70mm 63 70 26 50 TE46132 TE04616TE30001 HSK 63 F X ER 40-76mm 63 76 26 63 TE46140 TE04617TE30002 HSK 63 F X ER 40-90mm 63 90 26 63 TE46140 TE04617TE30005 HSK 63 F X ER 40-125mm 63 125 26 63 TE46140 TE04617TE41025 HSK 63 F X SYOZ 25-80mm 63 80 26 60 TE03638 TE03691

HSK 50F, 63F Tool holders for CNC Routers Dimensions in millimeters

BT30

HSK

HSKArbor

Pull Stud

NEW!


ER PRECISION INCH COLLETS AND COLLET SETSC

OLL

ETS

ER 11 ER 16 ER 20 ER 25 ER 32 ER 40 RangeDrill

ShankCAT.NO. CAT.NO. CAT.NO. CAT.NO. CAT.NO. CAT.NO.

TE04211116 TE04216116 .043 - .062" 1/16"TE04211332 TE04216332 TE04220332 TE04225332 TE04232332 .054 - .093" 3/32"TE0421118 TE0421618 TE0422018 TE0422518 TE0423218 TE0424018 .086 - .125" 1/8"TE04211532 TE04216532 TE04220532 TE04225532 TE04232532 TE04240532 .117 - .156" 5/32"TE04211316 TE04216316 TE04220316 TE04225316 TE04232316 TE04240316 .148 - .187" 3/16"TE04211732 TE04216732 TE04220732 TE04225732 TE04232732 TE04240732 .179 - .218" 7/32"TE0421114 TE0421614 TE0422014 TE0422514 TE0423214 TE0424014 .211 - .250" 1/4"

TE04216932 TE04220932 TE04225932 TE04232932 TE04240932 .242 - .281" 9/32"TE04216516 TE04220516 TE04225516 TE04232516 TE04240516 .273 - .312" 5/16"TE042161132 TE042201132 TE042251132 TE042321132 TE042401132 .304 - .343" 11/32"TE0421638 TE0422038 TE0422538 TE0423238 TE0424038 .336 - .375" 3/8"TE042161332 TE042201332 TE042251332 TE042321332 TE042401332 .367 - .406" 13/32"

TE04220716 TE04225716 TE04232716 TE04240716 .398 - .437" 7/16"TE042201532 TE042251532 TE042321532 TE042401532 .429 - .468" 15/32"TE0422012 TE0422512 TE0423212 TE0424012 .461 - .500" 1/2"

TE042251732 TE042321732 TE042401732 .492 - .531" 17/32"TE04225916 TE04232916 TE04240916 .523 - .562" 9/16"TE042251932 TE042321932 TE042401932 .554 - .593" 19/32"TE0422558 TE0423258 TE0424058 .586 - .625" 5/8"

TE042322132 TE042402132 .617 - .656" 21/32"TE042321116 TE042401116 .648 - .687" 11/16"TE042322332 TE042402332 .679 - .718" 23/32"TE0423234 TE0424034 .711 - .750" 3/4"

TE0424078 .836 - .875" 7/8"TE042401 .961 - 1.00" 1"

ER PRECISION COLLETS INCH SIZE

• Standard 0.0004" T.I.R• Ultra Precision 0.0002" T.I.R *• Collapse range: 0.039"*For ultra precision collets place UP in front of the regular part number

Clamping Range is .039" for ER 16, 20, 25, 32 and 40Compatible with DR, RD, ESX, AR and BR series colletsAll collets inspected for quality and accuracy

CAT.NO. Description D B MMax.

Speed Wrench Max. Torque*TE46111 ER RH 11 B Nut 19mm 11.8mm M14 x 0.75 70,000 TE04608 20 ft/lbsTE46116 ER RH 16 B Nut 32mm 18.0mm M22 x 1.5 65,000 TE04613 50 ft/lbsTE46120 ER RH 20 B Nut 35mm 19.5mm M25 x 1.5 60,000 TE04614 75 ft/lbsTE46125 ER RH 25 B Nut 42mm 20.5mm M32 x 1.5 55,000 TE04615 95 ft/lbsTE46132 ER RH 32 B Nut 50mm 23.0mm M40 x 1.5 50,000 TE04616 125 ft/lbsTE46140 ER RH 40 B Nut 63mm 26.0mm M50 x 1.5 40,000 TE04617 140 ft/lbs

Ultra High-Speed ER Coated Nuts

NEW!

NEW!



CARBON WOOD PRODUCTION & GENERAL PURPOSEB

AN

D SA

W B

LAD

ES

AT-A-GLANCE• Flexible backs are fatigue-resistant• Individually hardened teeth• Can be run at speeds up to 15,000 SFM (Surface Feet Per Minute)• Low cost-per-blade/low cost-per-cut in wood. Higher cost-per-cut in metal

APPLICATIONS• Wood• Plastic• Cork• Composition Board• Plywood• Aluminum• Non-ferrous metals• Low alloy steel

HEF CARBON HARD EDGE, FLEXIBLE BACK Weld to length pricingBand Width (Thickness)

¼"(.025")

3/8"(.025")

½"(.025")

5/8"(.032")

¾"(.032")

1"(.035)

1 ¼"( .035)

Length7' BS107014 BS107038 BS107012 BS107058 BS107034 BS107010 BS1070125

7'6" BS107514 BS107538 BS107512 BS107558 BS107534 BS107510 BS1075125

8' BS108014 BS108038 BS108012 BS108058 BS108034 BS108010 BS1080125

8'6" BS108514 BS108538 BS108512 BS108558 BS108534 BS108510 BS1085125

9' BS109014 BS109038 BS109012 BS109058 BS109034 BS109010 BS1090125

9'6" BS109514 BS109538 BS109512 BS109558 BS109534 BS109510 BS1095125

10' BS110014 BS110038 BS110012 BS110058 BS110034 BS110010 BS1100125

10'6" BS110514 BS110538 BS110512 BS110558 BS110534 BS110510 BS1105125

11' BS111014 BS111038 BS111012 BS111058 BS111034 BS111010 BS1110125

11'6" BS111514 BS111538 BS111512 BS111558 BS111534 BS111510 BS1115125

12' BS112014 BS112038 BS112012 BS112058 BS112034 BS112010 BS1120125

12'6" BS112514 BS112538 BS112512 BS112558 BS112534 BS112510 BS1125125

13' BS113014 BS113038 BS113012 BS113058 BS113034 BS113010 BS1130125

13'6" BS113514 BS113538 BS113512 BS113558 BS113534 BS113510 BS1135125

14' BS114014 BS114038 BS114012 BS114058 BS114034 BS114010 BS1140125

14'6" BS114514 BS114538 BS114512 BS114558 BS114534 BS114510 BS1145125

15' BS115014 BS115038 BS115012 BS115058 BS115034 BS115010 BS1150125

15'6" BS115514 BS115538 BS115512 BS115558 BS115534 BS115510 BS1155125

16' BS116014 BS116038 BS116012 BS116058 BS116034 BS116010 BS1160125

16'6" BS116514 BS116538 BS116512 BS116558 BS116534 BS116510 BS1165125

17' BS117014 BS117038 BS117012 BS117058 BS117034 BS117010 BS1170125

17'6" BS117514 BS117538 BS117512 BS117558 BS117534 BS117510 BS1175125

18' BS118014 BS118038 BS118012 BS118058 BS118034 BS118010 BS1180125

18'6" BS118514 BS118538 BS118512 BS118558 BS118534 BS118510 BS1185125

19' BS119014 BS119038 BS119012 BS119058 BS119034 BS119010 BS1190125

19'6" BS119514 BS119538 BS119512 BS119558 BS119534 BS119510 BS1195125

20' BS120014 BS120038 BS120012 BS120058 BS120034 BS120010 BS1200125

20'6" BS120514 BS120538 BS120512 BS120558 BS120534 BS120510 BS1205125

21' BS121014 BS121038 BS121012 BS121058 BS121034 BS121010 BS1210125

21'6" BS121514 BS121538 BS121512 BS121558 BS121534 BS121510 BS1215125

22’ BS122014 BS122038 BS122012 BS122058 BS122034 BS122010 BS1220125

NUMBER OF TEETH & BLADE TYPE4 6 8 10 12 14 18 24 8 10 12 14 18 24 32 2 3 4 6 2 3 4 6

INCHES STANDARD RAKER STANDARD WAVY HOOK SKIP1/4" X.025" ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼

3/8" X.025" ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼

1/2" X.025" ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼

5/8" X.032" ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼

3/4" X.032" ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼

1" X.035" ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼

Ideal for wood production cutting as well as short production/maintenance applications using low alloy steel & non-ferrous metals These carbon steel blades are manufactured from a single piece of high carbon steel with individually hardened tooth tips. The flexible back makes them more fatigue resistant. These blades are a perfect, all around band saw blade for all woodworking shops. Carbide tipped blades are readily available. NEW!


MA

CH

INES ROSETTE MACHINES & STEFF POWER FEEDERS

Rosette manufacturing has never been easier or faster than with MIKRON’s Automatic Rosette Machines and our Multi-Profile Rosette Cutters. Built with dependable pneumatics and an air over hydraulic feed system, these machines feed the block of wood under the cutter, hold it securely, make the cut and eject a first class quality rosette all in less than 8-10 seconds*. Our 2 knife, corrugated rosette knife holders are available in three sizes: 2-7/8", 3-1/2" and 4-3/4". The M-2 HS Steel knives cut smooth profiles up to 1/2" deep. A VHS video or a CD-ROM is available demonstrating these machines. * Depending on type of wood and depth of cut.

General Information• Production rates in excess of 300 to 500 pieces per hour are obtainable depending on species of wood, size of the cut and quality of the tooling.• Two quick and simple adjustments allow for size changes from 2-1/2" to 5" rosette blanks on the R200 and 5-1/2" to 8" rosette blanks on the R300.• Air requirements: 110psi• Three horsepower. Single or three phase.**• Adjustable time delay from 0 to 15 seconds for an excellent cut in many types of wood.• Each machine comes complete with one cutter head and two sets of blank knives. Standard and custom knives are available at additional cost. See our catalog.• Floor space required is approximately 3’ x 3’• Height: 30" without hopper.• Weight: 200-225 lbs.• Hopper capacity: 40 pieces, approximately 3/4" thick.

R200For 2-1/2" to 5" Blocks• 3-1/2" Maximum pattern diameter• 2-7/8" or 3-1/2" Multi-Profile Cutters • 1/2" Shank• 7500 RPM

R300For 5-1/2" to 8" Blocks• 4-3/4" Maximum pattern diameter• 2-7/8", 3-1/2" or 4-3/4" Multi- Profile Cutters • 3/4" Shank• 3600 RPM

R200 Shown

** Specify Single or 3 Phase

R200 Rosette MachineR300 Rosette Machine

CAT. NO. RO100RO101

STEFF Power FeedersThe Steff Power Feeder is a productive addition to any size shop. A versatile machine that can be used on shapers, table saws, and planers to safely produce smooth, quality cuts. 3 and 4 roller machines in stock, single and 3 phase. Other models available.Extra machine base for ease of moving feeder from machine to machine. CAT NO. PF2100

Model 2044 Model #20443/4 Horse PowerSingle Phase230 Volts4 Roller4 Speeds12-26-36-72 FPM

Model #20441 Horse PowerThree Phase230 Volts4 Roller4 Speeds12-26-36-72 FPM

CAT NO.PF2003

CAT NO.PF2001

Model 2034 CAT NO.PF1001

CAT NO.PF1003

Model #20343/4 Horse PowerSingle Phase230 Volts 3 Roller4 Speeds12-26-36-72 FPM

Model #20341 Horse PowerThree Phase230 Volts3 Roller4 Speeds12-26-36-72 FPM

NEW!

NEW!



Remove chip deflector and change knives in minutes.

Superior design and top quality materials have made the Williams & Hussey one of the safest, most versatile and economical combined-function woodworking machines you can own. 100% American made, this machine has found a place in shops of all sizes for over fifty years. Only machines costing hundreds of dollars more begin to compare with the power and versatility of this molder/planer. Each machine comes with a dust hood with a 4" diameter outlet, table guides, belt and pulley assembly and gear box oil.

Make Mouldings Fast and Easy with theWilliams & Hussey Molder/Planer Model 154Built To Go The Distance. 7 year Warranty. Made in USA

View of basic machine from infeed end. Shown with The Arc Master and the Feed Master Pro.

Over 170 Standard Knives available. See pages 19-26

for a complete list.

Ask us about our Custom knives in both Steel and

Carbide Tipped.

Send us a fax, wood sample or DXF file via the

internet for a [email protected]

MA

CH

INES

WILLIAMS & HUSSEY MOLDER/PLANER

Basic machine shown with stand, motor, standard gear box and on/off switch. Ask about us about The New Model 206 with the Factory Installed, Variable Feed, Multi-Pass and GS-1 Guide Systems. CAT NO. WH202

* Specify 110v or 220v

MACHINE, MOTORS & STAND CAT. NO. Model 154 Molder/Planer WH200

GS-1 Guide System WH205Spare Long Wear Feed Rollers WH212G

2 HP Single Phase Motor WH2152 HP Three Phase Motor WH216

Welded Mobile Stand w/ 2 rollers WH221Switch 110v or 220v, 1 phase WH223*

Switch 220v, 3 phase WH2233

Dimensions:• Working Height: 31"• Overall Height: 45"• Overall Width: 20"• Overall Length: 33"• Approx. Weight: 250 lbs.

Guide your wood straight and securely with this optional

New GS-1 Guide System. CAT NO. WH205

NEW!

NEW!

Produces:• Straight Moulding• Round Top Moulding• Elliptical Moulding *• Casings• Crowns• Base Caps• Handrails• Astragals• Raised Panels• And More!* When used with the Arc Master

Specifications:• 2 HP Motor• 7000 rpm arbor• 15 fpm feed rate• Max profile depth 3/4"• Max profile width 6-3/4"• Planes 7" wide• Min. stock length 9"• Min. stock thickness 1/4"• Max. stock thickness 8"• Multi-Pass System


The ARCMASTER is a fixture designed to produce curved, elliptical, or even irregular shaped mouldings on the Williams & Hussey Molder/Planer. With this attachment, these once difficult, even impossible wood shapes are safely produced with ease and accuracy. For smooth, easy feeding we recommend using SPRAYWAY SP295 T1 Dry Coating Lubricant - Page 4 CAT. NO. AC855.

Features:• Rugged all steel construction• Quickly adjusts to mouldings from 1" to 6" wide• Precision ball bearing guide system• Built-in removable fence• Installs easily in minutes

• Completely mechanical with easy to adjust spring tension• Simple and safe to use• 6" minimum radius• Made in the USA• Once installed it never has to be removed CAT NO. WH100

Features:• Installs in 60 minutes• Simple and safe to use• Feed speeds from 0 to 19 feet per minute• Industrial grade metal gears

Benefits:• Reduces number of cutting passes• Reduces wear and tear on feed rollers • Increases horsepower to the cutter head• A smoother finish for many types of wood

CAT NO. WH150 110v CAT NO. WH152 230v

The Ultimate Williams & Hussey complete with The Arcmaster and Feedmaster Pro.

A Variable Feed System for the Williams & Hussey Molder & Similar MachinesRetrofit your Williams and Hussey with The Feedmaster Pro. Designed with safety and versatility in mind, The Feedmaster Pro now lets you control the feed rate on your machine. Independent of the 2 horsepower motor that drives the cutter head, this unit supplies its power directly to the feed rollers with consistent, even pressure, and with an adjustable feed rate. Making a great machine even better. Available for 110v and 230v models, single or three phase.

MA

CH

INES ARCMASTER & FEED MASTER

NEW!



LARRY’S CLAMP, DRAWER & DOOR JIGSC

LAM

PS & JIG

S

THE DRAWER JIG Self-Centering Drawer Handle Mounting Jig.

LARRY’S CLAMP

• Extremely fast and easy to use.• Pressure bar is “crowned” to ensure all boards of equal thickness are held tight.• Has safety trigger and requires two hands to operate.• Holds boards from shifting while tightening clamps.• Cylinder has two moving parts, a piston and return spring.• Air pressure required-100 psi.• Will deliver years of useful service.

When used in conjunction with bar clamps, Larry’s Clamp is the fastest and easiest way to flatten boards when making glued up panels. Using two hands to hold and operate this air operated unit, fingers are safely out of the way when activating the clamp. Five hundred pounds of pressure ensures flat and even panels. Available in 18", 22" and 36" lengths. Longer lengths can be glued if last glue joint is captured between pressure bar and anvil.

Before

After

18"22"36"

CAT. NO.AC840AC842AC844

MODELS WEIGHT22 lbs28 lbs49 lbs

• Easily center your drawer handles with this easy to use device. • Comes with both standard (3", 3-1/2" and 4" cc) and metric ( 64mm, and 96mm cc) drilling guides as well as extension paddles for drawer fronts under 10-1/2"• Can be used with most standard drawer handle sizes. • Maximum drawer size 14-1/2" high by 29-1/2" long. Min. 3-1/2" to 6-1/2"• Hold in place and drill.

IF YOU MAKE DRAWERS AND DOORS YOU NEED THESE TOOLS

THE DOOR JIGPosition cabinet door handles and pulls with accuracy and speed with this rugged fixture.

CAT NO. AC861

CAT NO. AC860

• Set one pin at top of door and two pins on edge• Pins go through jig for both left and right

hole location • Hold in place and drill - “It’s just that easy”• Can be used on just about any size cabinet door• Two hardened steel drill guides for standard sizes included

NEW!

NEW!

See Larry's Clamp in action at http://www.cggschmidt.com

PROFIT THROUGH AMERICAN TECHNOLOGY WOOD MACHINERY MANUFACTURERS OF AMERICAMEMBERPrinted in U.S.A.

To Place An Order Call: 1-800-SCHMIDTFor more information and technical assistance (1-800-724-6438)

Call 1-201-391-5300FAX: 1-201-391-3565http://www.cggschmidt.comemail - [email protected]

Charles G.G. Schmidt & Co., Inc.301 West Grand AvenueMontvale, New Jersey 07645

DISTRIBUTED BY:

Ver 28

Charles G. G. Schmidt & Co., Inc.Quality Woodworking Tools and Accessories Since 1926

PRICE LIST FOR CATALOG NO. 1000 Effective March 15, 2010

FAX # 1-201-391-3565 Toll Free 1-800-SCHMIDT

180C $160.00181C $170.00182C $170.00183C $160.00AC100 $85.00AC101 $92.50AC102 $107.00AC102A $145.00AC102B $207.00AC103 $147.00AC104 $158.00AC105 $179.00AC105A $243.00AC106 $25.00AC107 $55.00AC108 $55.00AC109 $55.00AC109A $55.00AC110 $41.00AC111 $56.00AC112 $61.00AC113 $61.00AC113A $61.00AC114 $61.00AC114A $69.00AC115 $69.00AC116 $69.00AC116A $69.00AC116B $69.00AC117 $72.00AC118 $98.00AC125 $118.00AC200 $18.00AC200TD $11.00AC200TL $19.00AC200TS $12.00AC201 $18.00AC201TD $11.00AC201TL $19.00AC201TS $12.00AC202 $18.00AC202TD $11.00AC202TL $19.00AC202TS $12.00AC203 $18.00AC203TD $11.00AC203TL $19.00AC203TS $12.00AC204TL $49.50AC204TS $38.75AC205 $69.50AC206 $69.50AC207 $69.50AC208 $69.50AC209 $39.00AC210 $105.00AC211 $105.00AC250 $38.00AC250TL $57.00AC250TS $48.00AC251 $57.00AC251TL $78.00AC251TS $68.00AC252 $85.00AC252TL $105.00AC252TS $95.00AC253 $105.00AC280TL $49.00AC280TS $43.00AC281TL $49.00AC281TS $43.00AC282TL $49.00AC282TS $43.00AC283TL $49.00AC283TS $43.00AC284TL $49.00AC284TS $43.00AC285TL $59.00AC285TS $49.00AC300 $99.00AC301 $99.00AC302 $99.00AC303 $6.25AC400 $29.95AC404 $21.95AC405 $18.95AC406 $28.95AC407 $17.95AC408 $19.95AC409 $21.95

AC411 $25.95AC412 $39.95AC413 $19.95AC414 $25.95AC415 $9.95AC416 $17.95AC417 $29.95AC418 $25.95AC501 $15.00AC5014 $18.00AC5014P $11.00AC501P $9.75AC504 $42.95AC504A $42.95AC505 $42.95AC506 $42.95AC507 $42.95AC508 $58.25AC511 $58.25AC512 $58.25AC650 $25.95AC656 $25.45AC660 $28.95AC665 $31.20AC670 $36.25AC801 $55.10AC801C $72.20AC802 $89.10AC802C $110.00AC803 $112.00AC814 $36.75AC815 $36.75AC816 $36.75AC818 $209.00AC819 $209.00AC820#2 $49.00AC821 $265.00AC830 $1,650.00AC840 $459.00AC842 $479.00AC844 $899.00AC850 $8.95AC855 $9.50AC860 $289.00AC861 $119.00AC900 $31.95AC902 $32.00AC903 $36.00AC906 $39.00AC910 $29.95AC912 $105.00BBP055L $9.10BBP055R $9.10BBP057L $10.55BBP057R $10.55BBP085L $11.75BBP085R $11.75BBP087L $12.70BBP087R $12.70BBT055L $10.90BBT055R $10.90BBT057L $11.70BBT057R $11.70BBT085L $14.30BBT085R $14.30BBT087L $15.20BBT087R $15.20BD384 $123.00BHB0035 $28.10BM100 $87.00BM101 $87.00BM102 $87.00BM103 $87.00BM104 $87.00BM105 $87.00BM110 $87.00BM111 $87.00BM112 $87.00BM113 $87.00BM114 $87.00BN100 $90.00BN100A $99.00BN101 $90.00BN102 $90.00BN103 $90.00BN104 $91.00BN105 $91.00BN106 $125.00BN106A $125.00BN107 $125.00

BN108 $135.00BN109 $140.00BN110 $152.00BN111 $152.00BN165 $104.00BN170 $104.00BN175 $104.00BN200 $110.00BN225 $126.00BN250 $132.00BN275 $137.00BN300 $142.00BN350 $149.00BN400 $164.00BR401 $186.00BS107010 $31.20BS107012 $24.05BS1070125 $39.20BS107014 $22.05BS107034 $27.40BS107038 $23.20BS107058 $25.30BS107510 $32.40BS107512 $24.75BS1075125 $41.05BS107514 $22.65BS107534 $28.35BS107538 $23.85BS107558 $26.10BS108010 $33.65BS108012 $25.50BS1080125 $42.85BS108014 $23.25BS108034 $29.35BS108038 $24.50BS108058 $26.90BS108510 $34.90BS108512 $26.20BS1085125 $44.65BS108514 $23.80BS108534 $30.30BS108538 $25.20BS108558 $27.75BS109010 $36.10BS109012 $26.95BS1090125 $46.45BS109014 $24.40BS109034 $31.30BS109038 $25.90BS109058 $28.60BS109510 $37.40BS109512 $27.70BS1095125 $48.25BS109514 $25.00BS109534 $32.25BS109538 $26.65BS109558 $29.40BS110010 $38.20BS110012 $28.40BS1100125 $50.05BS110014 $25.60BS110034 $33.20BS110038 $27.20BS110058 $30.20BS110510 $39.45BS110512 $29.15BS1105125 $51.85BS110514 $26.20BS110534 $34.20BS110538 $27.90BS110558 $31.05BS111010 $40.65BS111012 $29.90BS1110125 $53.20BS111014 $26.80BS111034 $35.15BS111038 $28.55BS111058 $31.85BS111510 $41.90BS111512 $30.60BS1115125 $55.00BS111514 $27.40BS111534 $36.10BS111538 $29.20BS111558 $32.65BS112010 $43.10BS112012 $31.35BS1120125 $56.80BS112014 $28.00BS112034 $37.10

BS112038 $29.90BS112058 $33.50BS112510 $44.30BS112512 $32.05BS1125125 $58.55BS112514 $28.55BS112534 $38.05BS112538 $30.55BS112558 $34.30BS113010 $45.55BS113012 $32.80BS1130125 $60.35BS113014 $29.15BS113034 $39.05BS113038 $31.25BS113058 $35.15BS113510 $46.75BS113512 $33.55BS1135125 $62.15BS113514 $29.75BS113534 $40.00BS113538 $31.90BS113558 $35.95BS114010 $48.00BS114012 $34.25BS1140125 $63.95BS114014 $30.35BS114034 $41.00BS114038 $32.60BS114058 $36.80BS114510 $49.20BS114512 $35.00BS1145125 $65.70BS114514 $30.90BS114534 $41.95BS114538 $33.25BS114558 $37.60BS115010 $50.40BS115012 $35.70BS1150125 $67.50BS115014 $31.50BS115034 $42.90BS115038 $33.90BS115058 $38.40BS115510 $51.60BS115512 $36.45BS1155125 $69.30BS115514 $32.10BS115534 $43.90BS115538 $34.60BS115558 $39.20BS116010 $52.85BS116012 $37.20BS1160125 $71.10BS116014 $32.70BS116034 $44.85BS116038 $35.25BS116058 $40.05BS116510 $54.10BS116512 $37.90BS1165125 $72.90BS116514 $33.30BS116534 $45.80BS116538 $35.90BS116558 $40.90BS117010 $55.30BS117012 $38.60BS1170125 $74.70BS117014 $33.90BS117034 $46.80BS117038 $36.60BS117058 $41.70BS117510 $55.30BS117512 $39.35BS1175125 $76.45BS117514 $34.45BS117534 $47.75BS117538 $37.25BS117558 $42.50BS118010 $57.75BS118012 $40.10BS1180125 $78.25BS118014 $35.05BS118034 $48.75BS118038 $37.95BS118058 $43.35BS118510 $58.95BS118512 $40.80BS1185125 $80.05BS118514 $35.65

BS118534 $49.70BS118538 $38.60BS118558 $44.15BS119010 $60.20BS119012 $41.55BS1190125 $81.80BS119014 $36.20BS119034 $50.70BS119038 $39.30BS119058 $45.00BS119510 $61.40BS119512 $42.30BS1195125 $83.60BS119514 $36.80BS119534 $51.65BS119538 $39.95BS119558 $45.80BS120010 $62.60BS120012 $43.00BS1200125 $85.40BS120014 $37.40BS120034 $52.60BS120038 $40.60BS120058 $46.60BS120510 $63.80BS120512 $43.75BS1205125 $87.20BS120514 $38.00BS125534 $53.60BS120538 $41.30BS120558 $49.10BS121010 $65.05BS121012 $44.50BS1210125 $89.00BS121014 $38.60BS121034 $54.55BS121038 $41.95BS121058 $48.25BS121510 $65.05BS121512 $45.20BS1215125 $90.80BS121514 $39.20BS121534 $55.50BS121538 $42.60BS121558 $49.10BS122010 $67.50BS122012 $45.90BS1220125 $92.60BS122014 $39.80BS122034 $56.50BS122038 $43.30BS122058 $49.90CB101S $205.90CB101X $88.90CB102S $219.35CB102T6 $138.85CB102X $92.05CB103S $212.45CB103T6 $148.15CB103X $95.95CB104S $215.50CB104T6 $158.75CB104X $101.45CB105S $246.55CB105T6 $173.50CB105X $111.80CB106S $274.35CB106T6 $184.70CB106X $120.70CB155 $39.00CB180R $112.00CB181R $112.00CB182R $112.00CB183R $112.00CB184R $112.00CB185R $112.00CB186R $112.00CB187R $112.00CB189 $65.00CB189P $179.00CB190 $65.00CB190P $179.00CB191 $69.00CB191P $189.00CB201M6 $147.85CB201S $208.50CB201X $93.45CB202M6 $151.80CB202S $211.95CB202T6 $149.50

e-mail to [email protected]

2

CB202X $96.80CB203M6 $163.90CB203S $215.70CB203T6 $158.20CB203X $103.05CB204M6 $167.10CB204S $219.05CB204T6 $165.85CB204X $107.90CB205M6 $183.70CB205S $251.70CB205T6 $189.50CB205X $118.55CB206M6 $192.10CB206S $288.75CB206T6 $197.10CB206X $128.35CB207M6 $215.60CB207S $325.60CB207T6 $199.50CB207X $153.80CB208S $333.10CB208T6 $211.50CB208X $166.15CB209X $194.40CB2010X $205.25CB260 $39.00CB265 $39.00CB270 $40.00CB4106 $65.95CB4109 $65.95CB4116 $65.95CB4126 $72.35CB4136 $82.00CB841H6 $118.65CB841H9 $139.95CB842H6 $122.70CB842H9 $139.95CB843H6 $127.95CB843H9 $133.30CB844H6 $135.25CB844H9 $136.00CB845H6 $149.10CB845H9 $152.35CB846H6 $160.95CB846H9 $170.70CB851H6 $124.60CB851H9 $128.70CB852H6 $129.10CB852H9 $131.30CB853H6 $137.40CB853H9 $136.55CB854H6 $143.85CB854H9 $141.40CB855H6 $158.05CB855H9 $153.45CB856H6 $171.15CB856H9 $173.60CB857H6 $205.05CB857H9 $211.65CB858H6 $221.55CB858H9 $218.80CB859H6 $259.20CB860H6 $273.65CBA100 $71.00CBA101 $71.00CBA38L $92.00CBA38R $92.00CBA45L $92.00CBA45R $92.00CBA52L $92.00CBA52R $92.00CBCUT $2.50CT102 $166.75CT103 $179.00CT104 $185.80CT105 $189.35CT106 $210.05CT107 $263.45CT108 $302.90CT110 $325.35CT155 $117.95CT260 $130.00CT265 $130.00CT270 $150.00CT4005 $255.10CT40057 $83.70CT400A $27.05CT400A5 $27.05CT400B $45.35CT400B5 $45.35CT400C $66.30CT400C5 $63.30CT400D $93.45CT400D5 $93.45CT400E5 $105.55CT401 $277.25CT401A $33.05CT401B $53.30

CT401C $75.25CT401D $101.80CT402 $319.45CT402A $39.40CT402B $61.95CT402C $91.25CT402D $131.75CTCUT $22.00DT1003D $169.95DT1005D $144.95DT1010D $169.95DT1015D $210.80DT1020D $144.95DT1025D $169.95DT1030D $211.80DT1035D $144.95DT1040D $169.95DT1045D $211.80DT1050D $251.85DT1055D $285.15DT1060D $144.95DT1065D $169.95DT1070D $211.80DT1075D $251.85DT1080D $285.15DT1090D $217.85DT1095D $287.10DY152 $126.00DY153 $132.00 DY154 $142.00DY155 $164.00DY156 $126.00DY157 $146.00DY158 $146.00DY159 $132.00DY160 $142.00DY161 $165.00DY162 $146.00DY163 $162.00DY191 $121.00DY192 $132.00DY193 $146.00DY194 $136.00DY195 $144.00DY202 $146.00DY203 $150.00DY204 $174.00DY205 $172.00DY400 $157.00DY402 $157.00DY404 $174.00DY45 $196.00DY46 $206.00FL145 $123.00GW100 $19.50GW101 $19.50GW105 $19.50GW112 $24.95GW115 $22.95GW120 $23.95GW130 $36.95GW150 $39.75GW200 $28.75GW205 $39.50GW205C $49.95GW300 $275.00GW305 $281.00GW321 $229.00GW322 $245.00GW343C $329.00GW344C $292.00H100L $147.00H100R $147.00H100T $132.00H101L $142.00H101R $142.00H102L $163.00H102R $163.00H102T $142.00HMC250B $20.75HMC250C $34.15HMC313B $20.75HMC313C $34.15HMC375B $21.75HMC375C $36.50HMC375X562 $74.50HMC375X625 $77.90HMC500B $29.45HMC500C $39.15HMC625B $35.15HMC625C $43.50HMC750B $39.80 HMC750C $57.90 HMC1000B $50.25HMC1000C $73.30IC210 $38.00IC210B $289.00IC210SR $3.00IC211 $38.00

IC211B $289.00IC21114 $38.00IC21138 $38.00IC213 $38.00IC213B $289.00IC21338 $38.00IC240 $52.00IC430DO $42.00IC430DS $32.00IC435DO $52.00IC435DS $39.90IC435SO $52.00IC435SS $38.00IC635DO $60.00IC635DS $48.00IC640SO $60.00IC640SS $46.00IC642DO $64.00IC642DS $48.00ID430 $471.85ID430H $734.35ID431 $554.70ID431H $817.20ID432 $571.90ID432H $834.35ID433 $654.70ID433H $917.20ID434 $571.90ID434H $834.35ID435 $654.70ID435H $917.20ID436 $695.30ID436H $957.80ID437 $843.00ID437H $1106.25ID442 $671.85ID442H $934.35ID443 $753.10ID443H $1015.60ID444 $671.85ID444H $934.35ID445 $753.10ID445H $1015.60ID446 $859.35ID446H $1121.85ID447 $1001.55ID447H $1264.05ID8240 $625.00IG660 $525.00IG662 $395.00IG664 $425.00IG666 $469.00IG668 $498.00IN402 $250.00IN403 $325.00IN404 $395.00IN405 $495.00IN406 $595.00IN600A $453.00IN601A $596.00IN602A $742.00IN603A $830.00IN600B $566.00IN601B $713.00IN602B $860.00IN603B $975.00IN600C $674.00IN601C $828.00IN602C $979.00IN603C $1099.00IN650 $575.00IN651 $699.00IN652 $870.00IN653 $575.00IN654 $695.00IN655 $855.00IN656 $685.00IN657 $825.00IN658 $1075.00IN659 $645.00IN659H $960.00IN660 $765.00IN660H $1300.00IN661 $975.00IN661H $1650.00IN662 $740.00IN662H $1130.00IN663 $895.00IN663H $1530.00IN664 $1175.00IN664H $1875.00INKS202 $9.95INKS205 $9.95INKS207 $19.15INKS215 $20.75INKS220 $23.15INKS230 $23.15INKS240 $36.60INKS250 $34.85

INKS410 $25.35INKS412 $23.85INKS414 $25.35INKS414S $3.00INKS414TW $3.00INKS415 $39.65INKS415S $3.00INKS415TW $4.50INKS418 $66.00IPG100 $27.00IPG101 $52.00IR400 $260.00IRC4012 $19.50IS125S $5.00IS1253 $259.00IS1255 $289.00IS1255A $289.00IS1255B $289.00IS1263 $30.00IS1265 $30.00IS58085 $155.00IS58100 $169.00IS58125 $189.00ISRH10R $369.00ISRH10S $369.00ISR10RC $30.75ISR10SC $30.75ISR20RC $30.75ISR20SC $30.75ISR30RC $30.75ISR30SC $30.75ISR40RC $30.75ISR40SC $30.75ISR50RC $30.75ISR50SC $30.75ISR60RC $30.75ISR60SC $30.75ISR10RS $34.75ISR10SS $34.75ISR20RS $34.75ISR20SS $34.75ISR30RS $34.75ISR30SS $34.75ISR40RS $34.75ISR40SS $34.75ISR50RS $34.75ISR50SS $34.75ISR60RS $34.75ISR60SS $34.75IT35160 $725.00IT9505C $23.90IT9505S $5.70IT9506C $28.60IT9506S $7.60IT9510C $46.50IT9510S $11.90IT9512C $55.80IT9512S $12.50IT9513C $59.70IT9513S $13.60IT9515C $68.80IT9515S $15.40IT9517C $77.90IT9517S $17.70IT9518C $82.60IT9518S $18.70IT9519C $87.20IT9519S $19.50IT9523C $105.10IT9523S $23.60IT9524C $110.10IT9524S $24.60IT9545C $198.50IT9545S $46.30IT9546C $201.60IT9546S $47.30IT9561C $265.70IT9561S $60.00IT9577S $75.40MH100P $186.35MH102P $231.00MH103P $250.95MH105P $313.95MH106P $328.10MH1690 $60.00MH201P $134.75MH202P $159.95MH203P $193.15MH204P $229.50MH205P $262.60MH206P $294.55MH222P6 $149.95MH223P6 $175.50MH232P6 $154.45MH233P6 $187.50MH234P6 $218.45MH405 $390.00MH410 $475.00MH415 $695.00

MH418 $755.00MH423 $875.00MH442 $183.00MH4422 $171.25MH442D $185.10MH444 $245.45MH4442 $229.50MH444D $245.45MH445 $294.00MH4452 $259.45MH445D $294.50MH446 $322.45MH4462 $301.00MH446D $322.45MH447 $372.00MH4472 $330.00MH447D $372.00MH448 $410.20MH4482 $375.80MH448D $410.20MH449 $447.00MH4492 $416.00MH449D $447.00MH461 $179.00MH462 $265.00MH462A $345.00MH463 $398.00MH464 $475.00MH605 $425.00MH610 $555.00MH615 $798.00MH618 $889.00MH623 $1050.00MH642 $255.20MH644 $365.20MH646 $505.60MH662 $280.50MH664 $416.90MH666 $577.50MH672 $545.00MH674 $639.00MH676 $850.00MH682 $590.00MH684 $719.00MH686 $948.45MH780 $255.00MH781 $315.00MH785 $275.00MH786 $319.00MH790 $295.00MH791 $345.00MH809 $25.00MH816 $475.00MH816A $79.00MH817A $4.75MH820 $125.00P100G $105.00P100T $105.00P102G $105.00P102T $105.00P103G $105.00P103T $105.00P104G $93.00P104T $93.00P105G $110.00P105T $110.00P106G $137.00P106T $137.00P107G $122.00P107T $122.00P115 $90.00P116 $142.00PF1001 $1169.00PF1003 $1099.00PF2001 $1,229.00PF2003 $1,199.00PF2100 $165.00PKWIK $121.00PM105 $28.50PM110 $43.95PM115 $82.00PM120 $229.00PM121 $249.00PM125 $95.00PM200 $95.00PM250B $569.00PM250T $569.00QC100 $129.00QC100SL $265.00QC101 $129.00QC101SL $265.00QC102 $129.00QC102SL $265.00QC103 $129.00QC103SL $265.00QC104 $129.00QC104SL $265.00QC105 $129.00QC105SL $265.00

Ver 58

3

QC200 $129.00QC200SL $265.00QC201 $129.00QC201SL $265.00QC202 $129.00QC202SL $265.00QC203 $129.00QC203SL $265.00QC204 $129.00QC204SL $265.00QC205 $129.00QC205SL $265.00QC300 $63.00QC300SL $189.00QC601 $269.00QC602 $289.00RH100 $369.00RH101 $369.00RO100 Call for PriceRO101 Call for PriceRS101D $8.75RS101U $8.75RS102D $8.50RS102U $8.50RS103D $18.80RS103U $18.80RS104D $18.80RS104U $18.80RS105D $18.80RS105U $18.80RS106D $18.80RS106U $18.80RS107D $21.50RS107U $21.50RS108D $33.50RS108U $33.50RS109D $58.65RS109U $58.65RS110D $35.50RS110U $35.50RS111D $60.15RS111U $60.15RS112D $55.60RS112U $55.60RS113D $59.80RS113U $59.80RS114D $149.65RS114U $149.65RS115D $154.65RS115U $154.65RS116D $157.75RS116U $157.75RS117D $173.65RS117U $173.65RS206 $33.50RS208 $61.10RS210 $69.85RS211 $77.50RS216 $218.75RS308 $38.25RS309 $58.50RS310 $61.45RS311 $64.25RS312 $77.80RS313 $145.50RS316 $178.60RS401 $71.85RS402 $88.55RS403 $95.10RS404 $92.25RS405 $115.85RS406 $175.80RS407 $237.85RS501D $66.70RS501U $66.70RS502D $116.70RS502U $116.70RS503D $132.25RS503U $132.25RS504D $200.00RS504U $200.00RS505D $238.90RS505U $238.90SBCO504 $82.40SBCO506 $93.35SBCO508 $99.85SBCO509 $95.50SBCO511 $120.55SBCO513 $131.50SBCO516 $128.20SBCO518 $157.25SBCO521 $142.20SBCO523 $164.65SBCO532 $81.25SBCO533 $102.65SBCO534 $99.50SBCO536 $109.70SBCO537 $99.95SBCO539 $131.05

SBCO541 $133.25SBCO544 $134.20SBCO546 $146.80SBCO547 $133.50SBCO548 $156.30SBCO549 $143.50SBCO550 $191.85SBCO551 $166.35SBCS108 $91.40SBCS128 $109.75SBCS141 $225.00SBCS151 $230.35SBCS640 $104.00SBCS740 $126.15SBCS860 $81.85SBCS980 $149.30SBDF100 $99.95SBDF101 $99.95SBDF102 $137.30SBDF103 $208.20SBDF104 $246.30SBDS912 $285.00SBDS913 $455.00SBDS914 $199.95SBPS226 $121.30SBPS226A $160.90SBPS306 $165.55SBPS310 $200.25SBPS313 $206.05SBPS314 $185.00SBPS315 $179.00SBPS357A $272.05SBPS357B $197.05SBPS357C $170.20SBPS406 $284.50SBPS407 $282.45SBPS416 $225.75SBPS417 $266.20SBPS457 $369.20SBR307 $86.25SBR308 $80.70SBR309 $87.50SBR311 $92.85SBR312 $107.80SBR313 $120.05SBR314 $137.90SBR316 $143.90SBR317 $155.05SBS10X2 $133.15SBS1224 $135.45SBS1225 $135.45SBS12X2 $133.15SBS1524 $142.40SBS1636 $180.60SBS2034 $193.35SBS2036A $208.35SBS2036B $208.35SBS2036C $186.35SBSS100 $161.90SBSS101 $113.65SBSS102 $136.75SBSS103 $200.65SBSS104 $289.50SH4106 $577.00SH4110 $831.00SH4113 $996.00SH4115 $1080.50SH4118 $1295.00SH4123 $1650.00SH4206H $741.00SH4206 $615.00SH4210H $1115.00SH4210 $860.00SH4213H $1288.00SH4213 $1031.00SH4215H $1410.00SH4215 $1115.00SH4218H $1596.00SH4218 $1340.00SH4223H $1842.00SH4223 $1710.00SH4306H $795.00SH4310H $1193.00SH4313H $1385.00SH4315H $1523.00SH4318H $1728.00SH4323H $1995.00SH4406H $795.00SH4410H $1193.00SH4413H $1385.00SH4415H $1523.00SH4418H $1728.00SH4423H $2138.00SHSCREW $3.00SHTIPS $9.95SK101 $46.65SK102 $55.95SK103 $57.15SK104 $66.50

SK105 $69.95SK106 $75.65SK107 $86.30SK201 $56.00SK202 $67.65SK203 $72.35SK204 $80.45SK205 $83.95SK206 $93.25SK207 $102.65SK209 $122.45SK301 $65.35SK302 $74.65SK303 $80.45SK304 $96.80SK305 $101.50SK306 $108.45SK307 $120.10SK309 $135.30SL1003S $127.60SL1005S $136.10SL1006S $139.40SL103S $12.95SL105S $16.15SL106S $17.15SL1103S $140.35SL1105S $149.00SL1106S $153.55SL1203S $152.20SL1205S $157.05SL1206S $161.90SL1303S $162.90SL1305S $176.80SL1306S $182.20SL1403S $178.60SL1405S $190.50SL1406S $196.30SL1503S $190.50SL1505S $203.90SL1506S $210.20SL1603S $204.15SL1605S $217.70SL1606S $223.60SL1703S $210.60SL1705S $232.80SL1706S $237.50SL1803S $229.70SL1805S $245.90SL1806S $254.40SL1903S $242.40SL1905S $253.50SL1906S $266.30SL2003S $257.00SL2005S $268.40SL2006S $279.40SL203S $25.90SL205S $33.20SL206S $34.15SL2103S $269.95SL2105S $279.60SL2106S $287.15SL2203S $278.50SL2205S $293.10SL2206S $297.80SL2303S $298.20SL2305S $305.10SL2306S $324.20SL2403S $309.50SL2405S $312.90SL2406S $309.95SL2503S $313.70SL2505S $317.95SL2506S $323.05SL303S $38.85SL305S $49.80SL306S $51.30SL403S $51.80SL405S $66.35SL406S $68.45SL503S $64.90SL505S $75.40SL506S $76.60SL603S $76.60SL605S $81.65SL606S $84.10SL703S $89.30SL705S $95.30SL706S $98.20SL803S $102.10SL805S $108.80SL806S $112.30SL903S $114.85SL905S $121.40SL906S $132.75SM403 $178.00SS102H $127.95SS102X $104.95SS104H $127.95SS104X $104.95

SS106H $162.15SS106X $122.60SS108H $162.15SS108X $122.60SS110H $203.30SS110X $154.45SS112H $203.30SS112X $154.45SS114H $234.55SS114X $184.50SS116H $234.55SS116X $184.50SS202H $176.50SS202X $141.85SS204H $176.50SS204X $141.85SS206H $209.80SS206X $151.35SS208H $209.80SS208X $151.35SS210H $260.60SS210X $196.75SS212H $260.60SS212X $196.75SS214H $312.40SS214X $233.05SS216H $312.40SS216X $233.05SS218H $363.25SS218X $272.35SS220H $363.25SS220X $272.35SS222X $343.95SS224X $345.00SS302H $193.90SS302X $165.15SS304H $235.40SS304X $205.00SS306H $252.50SS306X $205.80SS308H $316.35SS308X $243.70SS310H $316.35SS310X $243.70SS312H $381.30SS312X $331.15SS314H $381.30SS314X $292.10SS316H $432.25SS316X $332.95SS318H $432.25SS318X $356.30SS320X $448.00SS322X $448.00SS800 $13.50SS802 $3.00ST400A $69.50ST400B $113.65ST400C $168.90ST400D $212.50ST401A $92.95ST401B $139.95ST401C $199.90ST401D $271.65ST402A $119.50ST402B $166.15ST402C $241.60ST402D $319.95T920060 $7.65T920100 $10.95T920130 $13.15T920150 $14.65T920190 $17.50T920230 $20.20T920240 $20.45T920270 23.50T920300 $25.50T920460 $40.40T920650 $57.10T921060 $25.70T921100 $39.85T921130 $50.00T921150 $56.55T921190 $71.05T921230 $84.55T921240 $89.40T921270 $99.95T921300 $111.80T921460 $181.85T921650 $256.95T950060 $11.00T950100 $14.20T950120 $15.80T950130 $16.60T950150 $18.20T950180 $20.60T950190 $21.40T950230 $24.55T950240 $25.35

T950320 $31.75T950400 $38.10T950410 $38.90T950510 $47.05T950520 $47.85T950630 $57.00T950640 $57.50T960060 $33.30T960100 $52.00T960120 $61.00T960130 $65.50T960150 $74.50T960180 $88.50T960190 $93.00T960230 $111.50T960240 $116.00T960320 $152.50T960400 $189.00T960410 $193.50T960510 $239.50T960520 $244.00T960630 $294.00TC103 $163.55TC10331 $212.85TC104 $164.55TC10431 $213.85TC105 $164.55TC10531 $214.35TC10537 $268.00TC106 $165.05TC10631 $227.30TC107 $170.10TC205 $185.95TC20531 $229.45TC20537 $302.85TC207 $186.20TC20731 $229.45TCCUT $11.00TE03638 $85.00TE03691 $20.00TE04211116 $28.00TE0421114 $22.50TE0421118 $22.50TE04211316 $22.50TE04211332 $28.00TE04211532 $22.50TE04211732 $22.50TE042161132 $22.50TE04216116 $31.00TE042161332 $31.00TE0421614 $22.50TE0421618 $22.50TE04216316 $22.50TE042161332 $31.00TE0421638 $22.50TE04216516 $22.50TE04216532 $22.50TE04216732 $22.50TE04216932 $22.50TE0422012 $25.50TE042201332 $25.50TE0422014 $25.50TE042201532 $25.50TE0422018 $25.50TE04220316 $25.50TE04220332 $31.00TE0422038 $25.50TE04220516 $25.50TE04220532 $25.50TE04220716 $25.50TE04220732 $25.50TE04220932 $25.50TE042201132 $25.50TE042251132 $27.00TE0422512 $27.00TE042251332 $27.00TE0422514 $27.00TE042251532 $27.00TE042251732 $27.00TE0422518 $27.00TE042251932 $27.00TE04225316 $27.00TE04225332 $32.00TE0422538 $27.00TE04225516 $27.00TE04225532 $27.00TE0422558 $27.00TE04225716 $27.00TE04225732 $27.00TE04225916 $27.00TE04225932 $27.00TE042321116 $27.00TE042321132 $27.00TE0423212 $27.00TE042321332 $27.00TE0423214 $27.00TE042321532 $27.00TE042321732 $27.00TE0423218 $27.00

Charles G. G. Schmidt & Co., Inc.Quality Woodworking Tools and Accessories Since 1926

PRICE LIST FOR CATALOG NO. 1000 Effective March 15, 2010

Charles G. G. Schmidt & Co., Inc.301 West Grand Avenue / Montvale NJ 07645

Toll Free Order Line 1-800-SCHMIDT(724-6438)Fax # 1-201-391-3565 Web http://www.cggschmidt.com

This list contains prices for over 1800 items used by woodworking shops of all sizes. All of our standard tools and replacement parts are available from stock and can usually be shipped the same day your order is placed. Our custom tools are designed and manufactured normally within a 5 to 15 working day period. Our terms of sale are listed on the inside front cover of our catalog.Prices and specifications are subject to change without notice. DISCOVER MasterCard

TE042321932 $27.00TE042322132 $27.00TE042322332 $27.00TE04232316 $27.00TE04232332 $37.00TE0423234 $27.00TE0423238 $27.00TE04232516 $27.00TE04232532 $27.00TE0423258 $27.00TE04232716 $27.00TE04232732 $27.00TE04232916 $27.00TE04232932 $27.00TE042401 $30.00TE042401116 $30.00TE042401132 $30.00TE0424012 $30.00TE042401332 $30.00TE0424014 $30.00TE042401532 $30.00TE042401732 $30.00TE0424018 $30.00TE042401932 $30.00TE042402132 $30.00TE042402332 $30.00TE04240316 $30.00TE0424034 $30.00TE0424038 $30.00TE04240516 $30.00TE04240532 $30.00TE0424058 $30.00TE04240716 $30.00TE04240732 $30.00TE0424078 $30.00TE04240916 $30.00TE04240932 $30.00TE04608 $13.00TE04613 $35.00TE04614 $35.00TE04615 $15.50TE04616 $20.00TE04617 $24.00TE06001 $175.00TE06001W $175.00TE06010 $222.00TE06106W $125.00TE06112 $127.00TE06113 $127.00TE06113W60 $120.00TE06113W90 $140.00TE061BT353276 $160.00TE07801 $20.00TE07803 $20.00TE07805 $41.00TE07806 $20.00TE07808 $20.00TE07810 $41.00TE07812 $20.00TE07814 $20.00TE12700100 $245.00TE1270040 $245.00TE1270055 $245.00 TE1270080 $245.00TE17105008001 $350.00TE17105008002 $350.00TE30000 $350.00TE30001 $249.00TE30002 $295.00TE30005 $375.00TE40050 $350.00TE41025 $399.00TE41060 $398.00TE41803H $350.00TE41085 $398.00TE41087 $398.00TE46111 $46.00TE46116 $49.00TE46120 $51.00TE46125 $55.00TE46132 $47.50TE46140 $50.00

TN100 $50.75TN10037 $69.65TN101 $52.30TN10131 $63.15TN10137 $69.65TN102 $52.30TN103 $52.30TN10331 $62.45TN10337 $69.70TN104 $52.30TN10431 $63.05TN105 $52.30TN10531 $64.85TN10537 $76.45TN106 $53.95TN10631 $65.00TN10637 $79.05TN107 $53.95TN10731 $66.90TN10737 $79.05TN20331 $70.60TN204 $55.65TN20437 $83.80TN205 $60.15TN20531 $74.30TN20537 $86.15TN206 $65.70TN20631 $81.55TN20637 $95.50TN207 $65.75TN20731 $81.55TN20737 $95.50TN208 $68.15TN20831 $83.55TN20837 $98.40TN209 $68.85TN20931 $85.35TN300H $94.95TN300X $77.95TN301H $96.05TN301X $77.95TN302H $97.50TN302X $82.30TN303H $104.90TN303X $82.30TN304H $113.70TN304X $88.95TN305H $123.50TN305X $88.95TN400H $100.45TN400X $87.35TN401H $104.20TN401X $87.35TN402H $109.75TN402X $91.95TN403H $112.95TN403X $91.85TN404H $125.45TN404X $99.45TN405H $138.50TN405X $99.45TN600CT $99.95TN600H $21.75TN600SC $105.45TN604CT $133.55TN604H $31.20TN604SC $115.00TN606CT $141.25TN606H $31.20TN606SC $125.00TN610H $34.35TN615CT $166.50TN615H $43.60TN615SC $149.00TN616CT $167.65TN616H $43.55TN616SC $159.00TN617H $43.55TN617SC $227.20TN620H $44.15TN624H $62.65TN625H $70.30

TN625SC $354.60TN625CT $295.95TN626CT $321.00TN626H $71.15TN626SC $487.65TN630CT $259.10TN630H $64.90TN630SC $380.35TN631H $57.25TN632CT $318.85TN632H $64.80TN632SC $340.20TN633CT $358.80TN633H $65.75TN634CT $425.00TN634H $80.85TN635CT $369.35TN635H $70.35TN635SC $395.00TN635AH $78.00TN635ACT $375.00TN6355CT $380.70TN6355H $78.15TN6355SC $359.00TN636AC $476.70TN636AH $126.90TN636BCT $462.80TN636BH $120.40TN636CT $394.15TN636H $92.90TN637CT $363.55TN637H $94.65TN639CT $479.60TN639H $101.80TN640H $104.50TN641CT $488.00TN641H $104.50TN642AC $424.60TN642AH $97.25TN642CT $559.00TN642H $129.05TN643AC $565.00TN643AH $163.30TN643CT $495.00TN643H $116.60TN644CT $695.00TN644H $177.65TN645CT $695.00TN645H $209.50TNCUT $1.75WC141 $89.25WC142 $99.75WC143 $110.25WC161 $125.00WC162 $135.00WC163 $145.00WC181 $138.00WC182 $148.00WC183 $160.00WC200 $295.00WC201 $475.00WC202 $495.00WC203B $395.00WC211 $275.00WC21114 $275.00WC21138 $275.00WC212 $289.00WC21214 $289.00WC21238 $289.00WC213 $275.00WC21338 $275.00WC214 $289.00WC21438 $289.00WC215 $595.00WC215C $575.00WC215EE $595.00WC215EEC $595.00WC216 $565.00WC216C $575.00WC216EE $595.00WC216EEC $595.00WC218 $595.00

WC218C $575.00WC220 $795.00WC220C $755.00WC221 $795.00WC221C $755.00WC222 $795.00WC222C $755.00WC223 $795.00WC223C $755.00WC2234 $199.00WC2234C $199.00WC2238 $199.00WC2238C $199.00WC224 $795.00WC224C $755.00WC225 $289.00WC225C $279.00WC226 $795.00WC226C $755.00WC230 $1,295.00WC230IN $1,350.00WC231 $1,295.00WC231IN $1,350.00WC232 $1,295.00WC232IN $1,350.00WC235 $315.00WC236 $315.00WC240XL $715.00WC416ST $695.00WC416S $695.00WC898 $55.00WH100 $695.00WH150 $519.00WH152 $519.00WH200 Call for PriceWH202 Call for PriceWH205 $159.00WH212G $52.00WH215 Call for PriceWH216 Call for PriceWH221 Call for PriceWH223 $159.00WH2233 $159.00WH404H $301.00WH404 $290.00WH406H $349.00WH406 $334.00WH600 $148.93WH601 $165.68WH601CB $213.30WH602 $176.50WH602CB $224.15WH603 $184.90WH603CB $228.17WH621 $108.91WH622 $42.35WH623 $59.60WH624 $76.80WH625 $95.20WH626 $112.30WH627 $130.85WH632 $44.70WH633 $61.95WH634 $80.25WH635 $97.40WH636 $115.80WH637 $132.97WH642 $44.67WH643 $64.25WH644 $81.40WH645 $100.90WH646 $118.10WH647 $135.28WHA100 $116.00WHA101 $116.00WHA38L $116.00WHA45L $116.00WHA45R $116.00WHA52R $116.00WM47 $182.00WM48 $177.00WM49 $162.00

WM51 $157.00WM52 $146.00WM53 $143.00WM54 $133.00WM57 $153.00WM58 $146.00WM59 $132.00WM67 $136.00WM68 $130.00WM70 $146.00WM74 $123.00WM75 $129.00WM81 $148.00WM82 $137.00WM84 $126.00WM86 $121.00WM89 $132.00WM93 $97.00WM94 $87.00WM95 $87.00WM96 $80.00WM100 $80.00WM101 $80.00WM102 $154.00WM103 $132.00WM104 $124.00WM105 $90.00WM106 $87.00WM107 $87.00WM108 $77.00WM109 $77.00WM110 $77.00WM116 $130.00WM119 $110.00WM126 $87.00WM127 $87.00WM133 $132.00WM134 $121.00WM135 $97.00WM147 $87.00WM148 $87.00WM163 $132.00WM164 $126.00WM166 $132.00WM167 $132.00WM172 $97.00WM175 $110.00WM180 $110.00WM182 $126.00WM183 $121.00WM185 $110.00WM186 $110.00WM207 $136.00WM212 $146.00WM213 $146.00WM217 $146.00WM218 $136.00WM273 $136.00WM274 $87.00WM276 $136.00WM297 $173.00WM298 $163.00WM300 $173.00WM304 $132.00WM315 $137.00WM316 $137.00WM321 $137.00WM327 $137.00WM329 $137.00WM332 $144.00WM351 $144.00WM356 $144.00WM361 $144.00WM366 $144.00WM371 $144.00WM376 $144.00WM390 $157.00WM444 $163.00WM445 $164.00WM448 $159.00WM683 $157.00

Send e-mails to [email protected]

For S Tools And Accessories Moulders Planers … put their training ... Glue-Line Rip Saw Blades ......

Documents

Transcript of For S Tools And Accessories Moulders Planers … put their training ... Glue-Line Rip Saw Blades ......