FOR ROYAL ENFIELD 650 TWIN - Zodiac
Transcript of FOR ROYAL ENFIELD 650 TWIN - Zodiac
www.zodiac.nl 1
PERFORMANCE PARTSFOR ROYAL ENFIELD® 650 TWIN
2
• Aggressive 2:1 race styl ing
• Shed 28 pounds whi le improving performance and sound
• 12% increase in peak hp and 7% increase in torque (when combined with S&S high f low air f i l ter)
• Durable al l Stainless Steel construct ion
Qualifier 2:1 Exhaust System for RE 650 Twins
The Qualifier is an aggressively styled 2-1 race replica exhaust system built for 2019-2020 RE 650 models. Crafted from TIG welded brushed stainless steel, it's as durable as it is good looking and sheds a full 28 lbs over the stock system. More importantly it bumps horsepower 12% and torque 7% while emitting a deep race note that's just as happy on the track as it is on the street.
Part # Description
785016 Qualifier 2-1 Performance Exhaust System for Royal Enfield® 650 Twins
785017 Qualifier 2-1 Performance Exhaust System for Royal Enfield® 650 Twins- RACE ONLY
S&S PERFORMANCE PARTS
www.zodiac.nl 3
Part # Description
785000 Race Only Stainless Slip-On Set for Royal Enfield® 650 Twins
• Improved horsepower & torque
• Brushed Stainless Steel Finish
• Removable dB reducer
• Deep performance exhaust note
• Durable al l Stainless Steel construct ion
• Stock--- - - - - - - - - - - - - - - -22.4 lbs (10.1 kg) Race Only--- - - - - - - - - -9 lbs (4 kg)
Tapered Cone Slip-ons for RE 650 Twins
ROYAL ENFIELD® 650 TWINS
4
Air Filter-• High-f low air c leaner, f lows 12% better than stock (34.7cfm vs. stock 30.9cfm)
• Washable, no more replacing dirty air f i l ters
• Easy to instal l
Cover Eliminator-• High-f low performance. 95% increase in f low, when paired with the S&S air f i l ter (60.4 cfm vs. stock 30.9 cfm)
• Made from durable stainless steel
650 Twin Air Filter Features
Part # Description
785002 High-Flow Replacement Air Filter for Royal Enfield® 650 Twins
785003 High-Flow Air Intake Eliminator Plate Kit for Royal Enfield® 650 Twins
S&S PERFORMANCE PARTS
www.zodiac.nl 5
These high compression pistons feature a 7cc raised dome to achieve a compression ratio of 11:1 (from 9.5:1). Higher compression is a key factor in increasing performance.
High lift and longer duration cam builds power sooner in the RPM range and holds it for longer. The new S&S cam for the 650 Twin uses the stock adjustable timing sprocket to allow you to dial in the power curve to match your riding style.
Intake
Open Close Duration Lobe Center
1° BTDC 35° ABDC 216 107
Exhaust
Open Close Duration Lobe Center
32° BBDC 10° ATDC 222 101
750cc Big Bore Kit
Stock 750 Kit
Bore x Stroke 78 x 67.8mm 83.5 x 67.8mm
Compression Ratio 9.5:1 11.0:1
865cc Big Bore Kit
Stock 865 Kit
Bore x Stroke 78 x 67.8mm 90 x 67.8mm
Compression Ratio 9.5:1 11.0:1
Part # Description
785005 High-Compression 11:1 Piston Kit for Royal Enfield® 650 Twins
785006 750cc Big Bore Kit for Royal Enfield® 650 Twins
785007 865cc Big Bore Kit for Royal Enfield® 650 Twins
High Performance Cam
Part # Description
785008 High-Performance Camshaft Kit with Shims for Royal Enfield® 650 Twins
ROYAL ENFIELD® 650 TWINS
6
Handlebar Adjusters-• Easy to instal l
• Up to 1" (25mm) adjustment forward or backward
• Bi l let 6061
• Durable black powder coat f inish
Power Commander® V Tuner-• Discover untapped potential and get the most out of your performance combinations with the Dynojet Power Commander V for Royal Enf ield 650 twin models.
Adjusters shown 1" (25mm) forward
650 Twin Adjuster Features
Dynojet® Power Commander® V Features
Part # Description
785011 Handlebar Adjuster Kit for Royal Enfield® INT 650 Twins
785012 Dynojet® Power Commander® V for Royal Enfield® 650 Twins
Part # Description
785009 Performance Clutch Kit for Royal Enfield® 650 Twins
785010 S&S ECM Kit with Adapter Harness for Royal Enfield® 650 Twins
S&S PERFORMANCE PARTS
www.zodiac.nl 7
Forged billet 4340 steel and an "H-Beam" design, gives these rods superior strength over stock rods; includes durable ARP 2000 fasteners and a longer life thanks to the shot-peened finish. They also feature premium bronze wrist pin bushings and are held to very tight tolerances with bores finished to +/- .0001" and weight to +/- 1 gram per end. These are stock-length rods with a floating style wrist pin.
Race inspired, state of the art shaftless throttle bodies allow for unobstructed air flow and instant response from idle to wide open. Constructed of billet aluminum and stainless steel the S&S shaftless throttle body is designed for the ultimate in race builds.
Connecting rod weight with bolts
Big End 383g
Small End 94g
High Performance Throttle Body
Forged Connecting Rod Set
Part # Services Description
785014 CNC Ported Head (Core Required) Service for Royal Enfield® 650 Twins
785015 Cylinder Liner Install Service (Includes Bore and Hone) for Royal Enfield® 650 Twins
Part # Description
785013 Smooth Bore Throttle Body for Royal Enfield® 650 Twins
Part # Description
785004 Forged Connecting Rod Set for Royal Enfield® 650 Twins
ROYAL ENFIELD® 650 TWINS
8
S a l e s I n f o : EUROPEAN HEADOFFICE AND WAREHOUSE ZODIAC INTERNATIONAL B.V.Industrieweg 44, 3641 RM Mijdrecht, The Netherlands Phone: +31 (0)297 288621 E-mail: [email protected] Internet: www.zodiac.nl
ZODIAC SALES OFFICES Austria Phone: +43 67 64 86 40 65 E-Mail: [email protected] France Phone: +33 (0)145 93 10 75 E-Mail: [email protected] Germany Phone: +49 (0) 2137 78740 E-Mail: [email protected] Hungary Phone: +36 30 217 18 32 E-Mail: [email protected] Phone: +39 342 656 1527 E-Mail: [email protected] Scandinavia Phone: +46 (0)70-518 14 62 Email: [email protected] Spain & Portugal Phone: +34 663 868 144 E -Mail: [email protected] United Kingdom Phone: +44 (0)1453 88 29 17 E-Mail: [email protected]
AUTHORIZED DISTRIBUTORSFrance F.C. Parts Phone: +33 (0)327 85 57 15 https://fcparts.fr/[email protected]
Switzerland American Bike Shop GmbH Phone: +41 (0)71 761 26 78 https://americanbikeshop.com/[email protected]