For Improved Battery Maintenance - Farnell
Transcript of For Improved Battery Maintenance - Farnell
BITE® ACCESSORIES For Improved Battery Maintenance
n Enhances the capabilities of the BITE product line
nDesigned for unique application situations
n The right tools for battery testing
n Facilitates complete battery testing
BITE® ACCESSORIES For Improved Battery Maintenance
Megger offers a complete line of accessories to enhance the capabilities of the BITE product line.
Probe Extension Kit for BITE2/2PThese probe extensions are mounted on the end of the BITE2/2P receiver pistols. This allows the receiver to measure either battery cells and/or intercell connection straps located in small, tight spaces. Cat. No. 34943-000 extensions can reach up to 12 inches.
Cat. No.: 34943-000
Dimensions: 18.15 x 1.95 x 1.30 in.
Weight: 1.88 lbs
Material: G10 / FR4 Gardlite glass fabric tube
Includes: (2) 12 in. extension rods (2) rod - receiver adapter assemblies (2) straight probe tips (2) hooked probe tips (2) right-angle probe tips (2) 45° probe tips
Probe Extension Kit for BITE2/2PThese probe extensions are mounted on the end of the BITE2/2P receiver pistols. This allows the receiver to measure either battery cells and/or intercell connection straps located in small, tight spaces. Cat. No. 34943-001 extensions can reach up to 24 inches.
Cat. No.: 34943-001
Dimensions: 29.49 x 1.95 x 1.30 in.
Weight: 2.30 lbs
Material: G10 / FR4 Gardlite glass fabric tube
Includes: (4) 12 in. extension rods (2) rod - receiver adapter assemblies (2) straight probe tips (2) hooked probe tips (2) right-angle probe tips (2) 45° probe tips
Probe Extension Kit for BITE2/2PThese probe extenders are mounted on the 34943-000 extension kit, and add an additional 12 inches to it.
Cat. No.: 34943-002
Length: 12 in. (each rod)
Weight: 6.74 oz
Material: G10 / FR4 Gardlite glass fabric tube
Includes: (2) 12 in. extension rods
Cat. No. 34943-000
Cat. No. 34943-002
Tip Kit for BITE3 The tip kit contains replacement tips for the BITE3 pistol probes.
Cat. No.: BI-10017
Dimensions: 1.42 x .156 in.
Material: Gold plated over nickel
Includes: (4) waffle tips
Quick Disconnect Lead Set for BITE3The quick disconnect lead allows the BITE3 to be used in strings utilizing spade lugs in their configuration.
Cat. No.: BI-10006
Length: 54 in. (typical)
Tip Type: Female spade terminal
Kelvin Clip Lead Set for BITE3The Kelvin clip allows the BITE3 to be clipped directly to the battery terminals and straps when performing the measurements.
Cat. No.: BI-10005
Length: 54 in. (typical)
Tip Type: Kelvin
AMP/Burndy Lead Set for BITE3The burndy leads allow the BITE3 to be used in strings utilizing 2-pin amp connectors in their configuration.
Cat. No.: BI-10004
Length: 54 in. (typical)
Tip Type: 2-pin male amp connector
Dual Point Lead Set, 6 ft.The dual point lead set is designed for measuring battery straps up to six-ft long for battery rooms with split string design. They are six feet from probe to probe.
Cat. No.: 36616
Length: Probe to unit, 84 in. (typical) Probe to probe, 80 in. (typical)
Tip Type: Dual-tip waffle
10-piece Lighted Probe Extension Kit for BITE3These lighted probe extensions are mounted on the end of the BITE3 pistol probe. This allows the BITE3 to measure either battery cells and/or intercell connection straps located in small, tight spaces. Cat. No. 35865 extensions can reach up to 27 inches.
Cat. No.: 35865
Length: 12 in., extends to 27 in.
Weight: 1.0 lbs
Material: ABS plastic
Includes: (2) 12 in. extension rods (2) 6 in. extension rods (2) rod - receiver adapter assemblies (2) pointed tips
CT Miniature Current Sensor for BITE2/2P, 1/2 in. Opening, 2-1/2 ft. LeadThe mini CT is plugged into the BITE2/2P receiver and used to measure the test current from the BITE2/2P transmitter. Its small size allows for use in confined areas where space is limited.
Cat. No.: 246034
Dimensions: 4.44 x 1.34 in.
Weight: 5.6 oz
Current Range: 0 A to 150 A
CT Extension Cable for BITE2/2P The CT extension cable connects the CT, used to measure the test current, and the BITE2/2P receiver, increasing its length to 20 ft. This is ideal for long battery strings.
Cat. No.: 33864-2
Length: 20 ft.
Gauge: 22 AWG
Material: Polypropylene
Bar Code Scanner with Preprinted Code Sheet for BITE2/2P The bar code scanner identifies the battery string to be tested by the BITE2, tagging the individual test data to a particular battery string.
Cat. No.: 246201
Dimensions: 5.98 x 2.84 x 0.866 in.
Weight: 2.89 oz
BITE® ACCESSORIES For Improved Battery Maintenance
Hard-Sided Carrying Case for BITE3The foam cutouts fit the instrument and its accessories.
Cat. No.: 35890
Length: 23 x 16 x 10 in.
Weight: 8 lbs
Material: High-density Polyethylene
PowerDBPower DB is a powerful software package that operates with the BITE2, BITE2P and BITE3.
Power DB allows you to transfer and analyze data from the BITE units and create custom reports with your companies logo. Power DB will allow you to trend voltages, impedances, strap resistances, cell temperature as well as specific gravity. Power DB will display the ripple current, float current, ambient temperature, calculate baseline data as well as having a location for a picture or diagram graphics. IDEAL FOR NERC and FERC requirements! Power DB comes in several versions including the freeware version DB LITE and the Power DB Advanced.
The full-version Power DB is a purchased copy that supports all the functions of Power DB LITE plus it operates with almost all Megger products and allows the user to merge data from different products onto one report.
Cat. No.: 1001-381 (PowerDB Lite)
Calibration ShuntsThe accuracy of all BITEs can be easily checked in the field using one of Megger’s NIST-traceable shunts. Simply check the BITE using a shunt in the range of a typical battery impedance value.
Cat. No. Current Rating Weight
249003 10 A 11. 2 oz.
249004 100 A 9.6 oz.
249005 500 A 16.0 oz
Dimensions: 5.94 x 1.18 in.
USB/RS232 Adapter for BITE3The USB/RS232 adapter connects to the BITE3 serial port and the PC USB port. The adapter allows the BITE3 to communicate with PCs that do not have serial ports.
Cat. No.: 35871
Length: 3-ft extension cable
Weight: 2 oz
Spare Battery for BITE3Cat. No.: 6121-492
Type: NiMH battery pack
8-Channel Digital Hydrometer Kit for BITE SeriesThe digital hydrometer measures the specific gravity of the battery electrolyte. The kit includes a data logger that allows the operator to transfer the recorded hydrometer data into the BITE battery report using the PowerDB software.
Cat. No.: 2001-692
Dimensions: 5.5 x 5.4 x 1.0 in.
Weight: 12.2 oz
Measurement Density Range: 0 g/cm3 — 3 g/cm3
Operating Temp. Range: 14° F to 122° F (10° C to 50° C)
Current Transformer Kit for BITE3The CT kit connects to the BITE3 allowing the measurement of escaped current. This permits impedance testing to be performed on parallel battery strings without the need to sectionalize the string.
Cat. No.: 35873
Dimensions: 2.6 x 7.68 x 14.82 in. (ID 1.3 in.)
Weight: 14.82 oz
Current Range: 0 A to 600 A
BITE® ACCESSORIES For Improved Battery Maintenance
BITE® ACCESSORIES For Improved Battery Maintenance
ORDERING INFORMATION
Item Cat. No. Item Cat. No.
Probe extension kit, 12 in. (30 cm) for BITE2 and BITE2P
34943-000 Lead set, 6 ft (1.8 m) probe to probe 36616
Probe extension kit, 24 in. (60 cm) for BITE2 and BITE2P
34943-001 USB/RS232 adapter for BITE3 35871
Extensions, 12 in. (30 cm), pair for BITE2 and BITE2P
34943-002 Spare battery for BITE3 6121-492
Lighted probe extension kit, 12/27 in. (30/70 cm), for BITE3
35865 8 channel digital hydrometer kit 2001-692
Miniature 1/2 in. CT for BITE2 and BITE2P 246034 Current transformer kit for the BITE3 35873
CT extension cable, 20 ft (6 m) for BITE2 and BITE2P
33864-2 Hard-sided carrying case for BITE3 35890
Bar code scanner kit (w/preprinted code sheet) for BITE2 and BITE2P
246201 PowerDB Lite 1001-381
Tip kit for BITE3 BI-10017 Calibration shunt, 0.01 W current rating 10 A
249003
Quick disconnect lead set, 54 in. (137 cm) BI-10006 Calibration shunt, 0.001 W current rating 100 A
249004
Kelvin clip lead set, 54 in. (137 cm) BI-10005 Calibration shunt, 0.0001 W current rating 500 A
249005
AMP/Burndy lead set, 54 in. (137 cm) BI-10004 Mains power adapter for BITE3 w/US plug 1003-171
Flex CT (6 inch) for the BITE2 MCCA-100B2 Mains power adapter for BITE3 w/ EU plug 1003-172
Flex CT (6 inch) for the BITE3 MCCA-100B3 Mains power adapter for BITE3 w/UK plug 1003-093
FLEX CT FOR BITE2 AND BITE3This Flex CT allows can be used with the BITE2 to measure AC ripple and test current. Will easily fit around large cables and bus bars.
The BITE3 version can be used with parallel strings so there is no need to isolate strings.
Accuracy: 1% of reading +/- 0.2mA
Power Source: 4 AA Alkaline Batteries NEDA 15A, IEC LR6
ID: 6 inches (152.4mm)
Length: Total Cable Length 9 feet (274.3cm)
Weight: 12oz (340g) with batteries
CAT No. for BITE2 version: MCCA-100B2
CAT No. for BITE3 version: MCCA-100B3
MAINS POWER ADAPTER FOR BITE3Power the BITE3 off of ac; no need for a battery pack
CAT No. with EU plug: 1003-172 CAT No. with UK plug: 1003-093 CAT No. with US plug: 1003-171
SALES OFFICE Megger USA - Valley Forge Corporate Center2621 Van Buren Avenue, Norristown, Pennsylvania, 19403, USAT. 1-610 676 8500 F. 1-610-676-8610
BITE_Accessories_DS_en_V23
www.megger.com
ISO 9001:2015The word ‘Megger’ is a registered trademark