The easy2grow Kit contains the following:

1x 47 ltr Tank with lid & 6mm Top Hat Grommet1x 2 cavity tray & lid2x 8.5 ltr pots (square) 1x AQUAvalve 1x 1.5 meters of 6mm pipe1x Filter (to be fitted inside the tank)2x Marix Discs (Place inside each pot) BLACK2x Root Control Discs (Place in tray, gold face up) Black & GOLD

Remove the yellow collar from the AQUAvalve by unscrewing it and slide it over one end of the 6mm pipe, included with your kit. Now push the pipe onto the AQUAvalve nozzle and replace the yellow collar.

Now secure the AQUAvalve in the 2 cavity tray by pushing it onto the raised Tee in the tray. The Tee slides into the half-moon recess at the bottom and back of the AQUAvalve.

Place the rectangular lid over the AQUAvalve.

• Raise your 47 ltr tank 1-2 feet above the highest tray.• Re-fill your tank when there is a third of the solution left. Don’t let it get too low.• Liquid feed can also be added to the water in the tank. The plants will then receive food as they receive water. Alternatively time release fertiliser can be added to the compost to provide

food for the plants. • X6 10mm holes are positioned in the top of the tray, these can be used to insert bamboo canes to form a wigwam for additional plant support.• X8 rectangular holes are also positioned around the base of the tray; these provide air circulation and allow you to pick the tray up easily.

• The tray if required can be secured to the top of a wall to create displays by using the two holes at either end of the tray

The easy2grow Kit is GUARANTEED to water & feed your plants for a minimum of two weeks.

1

2

3

Two Marix Discs, (BLACK) are supplied with the kit. Place a disc inside each pot. The Marix Discs prevent any compost/soil from leaving the pot.

4

Two RCD’s (Root Control Discs), GOLD & BLACK are supplied with the kit. Place a disc, gold face up into each side of the tray. The RCD’s will prevent roots from leaving the pot.

5

Now push the other end of the 6mm pipe into the grommet at the bottom of the 47 ltr tank, so that you are able to see the pipe inside the tank, 1" will suffice. Take the filter and push it into the pipe that is visible inside the tank.

6

Now pot up, place up to 1" of washed gravel or similar inside each pot and the compost of your choice. Use good quality compost freely available from your local garden center and plant up, water through and allow to drain outside the tray. Just before you place the pots into the tray take a small hand brush and remove any soil/compost that is stuck to the bottom & sides of the pots. It is important that you keep the tray clean so that obstructions do not interfere with the AQUAvalve. Fill your tank with water and add liquid feed.

7

SE

T U

P

Useful tips

FOR FURTHER INFORMATION PLEASE VISIT www.autopot.co.uk Video instructions are also available here.

The easy2grow Kit can be easily extended to feed six plants by simply adding additional trays.