For ConTech Lighting RGB Controller: TLPRGBRF
Transcript of For ConTech Lighting RGB Controller: TLPRGBRF
TLPRGBRF INST
For ConTech Lighting RGB Controller: TLPRGBRF
www.contechlighting.com1-847-559-5500 This document can be recycled.
• The TLPRGBRF multi-function LED controller is a universal dimming controller, which adopted advanced PWM (Pulse Width Modulation) digital dimming technology, PC engineering plastic, soft button control and exquisite appearance; functional change and brightness adjustment. It can be controlled by the buttons on the receiver and also by RF remote control, which is widely used in the resistor current limiting single color LED products. Automatically adapt to DC 12V - 24V voltage input.NOTE: TLPRGBRF can be connected to the constant current power repeater to control the
hi-power LED lights.
TECHNICAL SPECS
FEATURES• Automatically adapt to LED lights with voltage from DC5-24V• On/Off button function available• 3-Channel single color output control, 6A per channel, total for 18A• Built-in 5 change modes and 25%, 50%, 75%, 100% 4 shortcuts of brightness options
available• Speed and brightness adjustable• DIY modes• Long distance RF remote control
OPERATING INSTRUCTIONS• There are eight (8) functions keys on the receiver: ON/OFF, PAUSE, MODE, DIM,
SPEED/BRT+, SPEED/BRT-, M1, M2• The learning of the remote control:
Learning ID: Press ON/OFF button on the receiver for 3 seconds, it is on the state of addressing when the RF green indicator light is on. Then press any button on the remote control, the indicator light turns off, the controlling between the remote control and the receiver is activated.
Cancelling ID: Press the ON/OFF key over 5 seconds. The RF green indicator light is on and then off. Press any button on the remote control, the RF grrn indicator light start flickering, it means the controlling between the remote control and receiver is cancelled.
1
2
HH
HH
HH1-
1/2"
1-3/
16"
5/8"
1/2"
3/8"3/8"
8"
3/4"
8-1/4"
(Common Anode)PInput PowerMax Current Load Max Output PowerDimming RangeRemote Control DistanceWorking TemperatureDimensionPackage SizeWeight (G.W)
ower Supply Chosen DC CV SMPSDC12V~DC24V
6A/CH×3CH 18A Max 216W/432W(12V/24V)
100m-30 ~55ºC ºCL211×W40×H30(mm)L313×W50×H32(mm)230g
5~100%
TLPRGBRF
2" 1/2"
4-1/4"
Button DescriptionReceiver sign Remotecontrol sign
PAUSE
DIM
SPEED/BRT+SPEED/BRT-
DIY
ON/OFF
MODE
Turn on/off the receiver.(Turn on/off the LED light)
Press the key to select 5 modes: color fade in and fade out, color flicker, color strobe, color skipping and color smooth.
Under the MODE status, press these two keys to quicken or slower speed. Under the DIM state, Press these two keys to increase or decrease the brightness.
Easy brightness selecting function for 25%、50%、75%、100% brightness.
Under the MODE status, Press the key to rest at current color, it will continue to change if press again. Press in 3 seconds, the buzzer can be on or off.
Press the key over 3 seconds, the receiver will save the present function mode automatically. It is convenient for the user to save the changing mode or static brightness state that he like. The receiver has M1, M2 2 keys and the remote control has M1 ~ M6 6 keys.
Keep pressing to adjust the brightness continuously.
Continued on page 2
INSTALLATION INSTRUCTIONS
TLPRGBRF INSTwww.contechlighting.com1-847-559-5500 This document can be recycled.
For ConTech Lighting RGB Controller: TLPRGBRF
3
4
WIRING DIAGRAMS• Connected to LED module (Figure 3)• Power repeater can be added to expand power when the power is not enough.
Constant current power repeater also can be added if control the high power LED at the same time. (Figure 4)
NOTES• The product shall be installed and serviced by a qualified person• This product is non-waterproof. Please avoid the sun and rain. When installed
outdoors, please ensure it is mounted in a water proof enclosure.• Good heat dissipation will rpolong the working life of the controller. Please
ensure good ventilation.• Please check if the output voltage of and LED power supplies used comply with
the working voltage of this product.• Please ensure that adequate sized cable is used from the controller to the LED
lights to carry the current. Please also ensure that the cable is secured tightly in the connector.
• Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
• If a fault occurs, please return the product to your supplier. Do anot attempt to fix this product by yourself.
IMPORTANT SAFETY INSTRUCTIONS:• Read all the instructions before installation. Save instructions for later use.• Turn off power at fuse or circuit breaker box before installation or before doing any
maintenance work.• Product must be grounded to avoid potential electric shock and any other potential hazards.• Product must be mounted in locations and at heights and in a manner consistent with its
intended use, and in compliance with National Electrical Code and local codes. Use of accessory equipment is not recommended.
• Installing contrary to instructions may cause unsafe conditions.• Do not block light from the trim aperture, in whole or in part, as this may cause unsafe
conditions.• Warning: Risk of fire. Most dwellings built before 1985 have supply wire rated at 60°C.
Consult a qualified electrician before installation.• To avoid hazards to children, account for all parts and properly dispose of all packing
materials.• Call the Technical Support department at ConTech Lighting with any installation questions:
847.559.5500.
POWERSUPPLY
LED
mod
ule
LED
mod
ule
LED
mod
ule
LED
mod
ule
LED
mod
ule
LED
mod
ule
LED
mod
ule
LED
mod
ule
LED
mod
ule
LED
mod
ule
LED
mod
ule
LED
mod
ule
POWERSUPPLY
In-p
hase
Cab
le
POW
ERSU
PPLY
LED
Mod
ule
LED
Mod
ule
HH
HH
HH
HH
HH
DC48VAC90-250V
POW
ERO
UTP
UT
INPUTSIG
NAL
MODEL: LT-3090-350LED CONTROLLER
POWER REPEATER
350mA Constant Current Output
Example
Drives 1~12pcs 1W Hi-power LEDx3CHPOWER SUPPLY
Constant Current Power Repeater
Constant Voltage Power Repeater
INSTALLATION INSTRUCTIONS
All specifications subject to change without notice. For ConTech’s limited product warranty, go to www.contechlighting.com. For a printed copy of the warranty, call 1-847-559-5500.