for aluminium systems - Beslagskonsult ABbeslagskonsult.se/download/broschure/haps/haps... · for...
-
Upload
truongdang -
Category
Documents
-
view
217 -
download
3
Transcript of for aluminium systems - Beslagskonsult ABbeslagskonsult.se/download/broschure/haps/haps... · for...
2
Flexible, universal, individual movements and yet permanently connected - high
demands fulfilled by all HAPS products.
Optics and safety that your customer will appreciate, combined with high functionality and
easy assembly for a time and cost-reduced processing. HAPS measures its innovations against
these demands and the new A300. Modern hinge appearance suitable for modern door
designs n Fastened directly – assembled directly n Support pins for convenient assembly and
to prevent tilting of the door leaf n Adjustment in all directions with one tool
In constant cooperation with well-known door manufacturers, progressive and innovative
solutions are developed for the hardware and fastening technology. Alongside the tried and
tested, comprehensive range there are further developments and innovations as well as special
solutions for HAPS, there are always new, interesting challenges.
Dynamics, which you daily feel.Since 75 years.
Page
Filigree but strongProduct benefits 4
Adjusted accurately with one toolPractical 3D adjustment 5
Drilling, positioning, screwingAssembly details 6
Precision in detailExploded drawing 7
HAPS A300 – the universal door hingeProduct details and technical data 8 – 9
HAPS A300-S – with staggered pivot pointAdvantages / Practical 3D adjustment 10 – 11
Your requirementsVariants and combinations / Mounting overview 12
Flexible in useAccessories 13
All at a glanceProduct compass 14 – 15
3
Table of contents
4
Filigree but strong - the HAPS A300
The well thought designed universal door hinge for aluminium doors
appears in modern butt hinge optics in a 2 and 3 part version.
A simple assembly enables the direct screwing without backing plates –
this guarantees reduced assembly times and costs for almost all installation
situations. For this door hinge the covercaps are also fixed with a clip.
Clip fixture: Press, secure with an Allen key – done.
The tilting of the door leaf is prevented by the support pin.
No hinge offset through linear horizontal adjustment.
Advantagesin the overview
5
Adjusted accurately with one tool
Fine pressureadjustment
Horizontaladjustment
Verticaladjustment
Advantages
n For aluminium doors up to 120/160 kg
n Can be used as left and right hung doors
n 3D adjustment with one tool when door is mounted
n Various RAL powder coatings
n Anodised surfaces
n 2 and 3 part versions
n Corrosion-resistant axis pin as standard
n System designed to prevent tilting of the door leaf
n Bearing maintenance free through high quality plastic components
n Certified according to CE and SKG
n Hinge parts made of extruded alu-minium
n Increased burglary resistance for out-ward swinging doors through security pins (SKG) see page 7
n Clipable cover caps
For 2 part A300 and A300-S
Practical adjustment options with just
one tool. With few actions, a convenient
3D adjustment can be made accurately
with a 5 mm Allen key.
6
Drilling, positioning,screwing
Fastened directly - Finished directly.
Well thought out assembly technology that saves time and reduces costs.
Direct screwing system
Using the jig the 10 mm holes for the screws
and the 6 mm holes for the support pins are
drilled fastly and precisely. The profile should
have a wall thickness of at least 1.6 mm.
Then place the hinge part onto the
profile and fasten the screws.
The support pins prevent tilting
of the door leaf and position
the hinge to the profile
during assembly.
Fastening with backing plates
By using the precise drilling jig, the
holes can be drilled quickly. The
backing plates are inserted and
fixed using the springs flush
over the drilled holes. Then
position the door hinge
and screw it to the
profile.
AssemblyNotes and technology
3D adjustment of the 3 part A300
The adjustment is similar to the 2 part A300, see
page 5 for more information. The fixture of the
excentric bushing for pressure adjustment in the door
leaf section (1.) requires a positioning pin.
After adjustment the positioning pin will
be removed and the clip cap will be fixed.
7
Precision in detail
A wide range of coordinated preci-
sion parts enables an easy assembly
and adjustment and guarantees a
secure function.
Convenient during assembly
and safe to use.
The support pins are protec-
ting the hinge against tilting.
The screwed clip fixture
and the use of security pins
(optional for outward open-
ing doors) prevent the hinge
against manipulation.
8
Convincing design – thought-out technology.
In different versions – to meet all your requirements.
HAPS A300 –the universal door hinge
Door hinge A300Product details
The HAPS A300 is available in many different versions in order to adapt with maximum flexibility to your requirements. Information about special versions is available on request.See page 13 for the matching screws and accessories.
HAPS A3002 part version
Drilling distance 63 mm (RA21 + FL42)
78 mm (RA21 + FL57)
84 mm (RA42 + FL42)
99 mm (RA42 + FL57)
Without fastening materials 37 6100 00 .. 37 6300 00 .. 37 6500 00 .. 37 6700 00 ..
With backing plate 37 6120 00 .. 37 6320 00 .. 37 6520 00 .. 37 6720 00 ..
Backing plate with stainless steel screws 37 6121 00 .. 37 6321 00 .. 37 6521 00 .. 37 6721 00 ..
60 mm screws 37 6160 00 .. 37 6360 00 .. 37 6560 00 .. 37 6760 00 ..
60 mm stainless steel screws 37 6161 00 .. 37 6361 00 .. 37 6561 00 .. 37 6761 00 ..
76 mm screws 37 6176 00 .. 37 6376 00 .. 37 6576 00 .. 37 6776 00 ..
76 mm stainless steel screws 37 6177 00 .. 37 6377 00 .. 37 6577 00 .. 37 6777 00 ..
HAPS A3003 part version
Drilling distance 63 mm (RA21 + FL42)
78 mm (RA21 + FL57)
84 mm (RA42 + FL42)
99 mm (RA42 + FL57)
Without fastening materials 37 5100 00 .. 37 5300 00 .. 37 5500 00 .. 37 5700 00 ..
With backing plate 37 5120 00 .. 37 5320 00 .. 37 5520 00 .. 37 5720 00 ..
Backing plate with stainless steel screws 37 5121 00 .. 37 5321 00 .. 37 5521 00 .. 37 5721 00 ..
60 mm screws 37 5160 00 .. 37 5360 00 .. 37 5560 00 .. 37 5760 00 ..
60 mm stainless steel screws 37 5161 00 .. 37 5361 00 .. 37 5561 00 .. 37 5761 00 ..
76 mm screws 37 5176 00 .. 37 5376 00 .. 37 5576 00 .. 37 5776 00 ..
76 mm stainless steel screws 37 5177 00 .. 37 5377 00 .. 37 5577 00 .. 37 5777 00 ..
9
HAPS A300 –the universal door hinge
Select the two digits
at the end of the item no.
the finish you want
.. .... .. 01 E6/EV1 anodised
.. .... .. 46 KS RAL 9016
RAL colours and special finish on request
HAPS A3002 part version
HAPS A3003 part version
2828
24(80)
502
102
32
42 ±31414
42
502
157
2828
2840
3240
1619
(147
)
550
821
1442 ±3
HAPS A300Drilling distance 63 mm
HAPS A300Drilling distance 78 mm
21 42
HAPS A300Drilling distance 84 mm
HAPS A300Drilling distance 99 mm
5721
42 42 5742
10
Strong and offset – the HAPS A300-S
The HAPS A300-S completes the proven
A300 series. The new hinge with a stag-
gered pivot point carries sash weights up
to 160 kg – ideally for narrow frames and
offset profiles.
Clip fixture: Press, secure with an Allen key – done.
The tilting of the door leaf is prevented by the support pin.
No hinge offset through linear horizontal adjustment.
Advantagesin the overview
Advantages
n For aluminium doors up to 160 kg
n Can be used as left and right hung doors
n 3D adjustment with one tool when door is mounted
n Various RAL powder coatings
n Anodised surfaces
n 2 part version
n Corrosion-resistant axis pin as standard
n System designed to prevent tilting of the door leaf
n Lateral adjustment without hinge offset
n Bearing maintenance free through high quality plastic components
n Certified according to CE - Hinge grade 14, and SKG**
n For rebated doors
n Applicable for narrow frame profiles
n Staggered pivot point
n Hinge parts made of extruded alu-minium
n Increased burglary resistance for out-ward swinging doors through security pins (SKG) see page 7
n Clipable cover caps
2832 28
28
102
50
14
11
11
For high demands on narrow door frames
The A300-S with sleek butt hinge – optics meets
contemporary demands, especially in function,
design and modern architecture.
Narrow frame profiles taking up a
large share here. The straight look of
the A300-S will be maintained, even
if a horizontal adjustment is carried
out – there will be no hinge offset.
For your individual
situation HAPS
offers an adequate
A300 and A300-S
solution.
Property e. g. detached house, block of houses public buildings (e. g. schools, hospitals, etc.)
max. door weight kg 120 160
Top-door closer
Recommended hinge
Hinge placement suggestions with a frame profile (approximately 45 mm), wall thick-ness of approximately 2 mm and a maxi-mum door leaf size of 1250 x 2000 mm and 1250 x 2300 mm
2x 3x 3x 4x2x 3x 3x 4x
Approx. 300 mm
Approx. 300 mm
12
Your requirementsvariations and combinations
Mounting overview
A300 – Flush door A300 – Rebated door
HAPS A300-S – Rebated doorwith staggered pivot point
42 ±31414
42
8 14
4221
50
11
14
AccessoriesVersions
42
21
14
20
28
8
Special door hinge A300
13
Flexible in use –accessories
Special door hinge A300
Backing plate, including springs, 14 mm wide
Description Dimensions Item no.
Short 60 x 14 x 12.5 79 0322 00 90
Long 167 x 14 x 12.5 79 0323 00 90
Base and packer, for A300-S
Description Thickness Item no.
Base 1.5 mm 79 0314 01 XX
Packer 1 mm 79 0315 01 60
Cover cap, with clip fixture
Description Colour Item no.
For A300 2 part version, top white 76 5053 02 61
For A300 2 part version, top black 76 5053 02 64
For A300 3 part version, top white 76 5064 01 61
For A300 3 part version, top black 76 5064 01 64
For A300 2 / 3 part version, bottom white 76 5064 00 61
For A300 2 / 3 part version, bottom black 76 5064 00 64
For A300-S white 76 5056 01 61
For A300-S black 76 5056 01 64
Security set for external assembly, Set includes 4 security pins
Description Item no.
4 pieces in a set 71 9027 90 00
Drilling jig, for chamber profile,shadow groove stone 4/5/6 mm included in delivery
Description Item no.
For A300 (drilling distance 63 mm) 01 0437 00 01
For A300 (drilling distance 78 mm) 01 0441 00 01
For A300 (drilling distance 84 mm) 01 0438 00 01
For A300 (drilling distance 99 mm) 01 0442 00 01
For A300-S (drilling distance 50 mm) 01 0447 00 01
Special versions on request
Screws, for direct screwing
Length Description Item no.
60 mm ST11 x 1.6 x 60 40 1160 00 55
60 mmST11 x 1.6 x 60 stainless steel 40 1160 00 00
68 mmST11 x 1.6 x 68 stainless steel 40 1168 00 00
76 mm ST11 x 1.6 x 76 40 1176 00 55
76 mmST11 x 1.6 x 76 stainless steel 40 1176 00 00
76 5053 02 61
76 5064 01 64
For A300 2 part version,
Screws, for assembly with backing plates
Description Dimensions Item no.
Steel M8 x 30 mm 66 0830 00 55
Stainless steel M8 x 30 mm 66 0830 00 00
Steel M8 x 40 mm 66 0840 00 55
Stainless steel M8 x 40 mm 66 0840 00 00
14
All at a glance with the product compass
Product compassN
OW
N
OW
Assembly options
Door leaf weight
kg
3D adjustment when door is mounted
Increased burglary
resistance
Linear horizontal adjustment
System against
tilting of hinge
Rebate 0 – 10 mm
Cover clip
Individual packaging
Industrial packaging
Plastic parts black/white
Hinge grade
Powder coating
according to RAL colours
Anodised finishesDirect screwing With backing plates
HAPS A300
2 part version
120 13
HAPS A300
3 part version
160 1) 2) 14
HAPS A300-S
2 part version
160 3) 14
Available in steel or stainless steel
Available in steel or stainless steel
Available in steel or stainless steel
15
Assembly options
Door leaf weight
kg
3D adjustment when door is mounted
Increased burglary
resistance
Linear horizontal adjustment
System against
tilting of hinge
Rebate 0 – 10 mm
Cover clip
Individual packaging
Industrial packaging
Plastic parts black/white
Hinge grade
Powder coating
according to RAL colours
Anodised finishesDirect screwing With backing plates
HAPS A300
2 part version
120 13
HAPS A300
3 part version
160 1) 2) 14
HAPS A300-S
2 part version
160 3) 14
1) When using 2 door hinges 2) When using 3 door hinges 3) Rebate 11 – 14,5 mm
Window / Door hinges for
PVC, aluminium and timber systems
Special parts for hardware
and fastening technology
For more information: www.haps.de.
Get your free brochure on request.
Door hingesfor PVC systemsDoor hingesfor PVC systems
HAPS GmbH + Co. KG
Langenberger Straße 131-133
D-42551 Velbert/Germany
Telephone +49 (0) 20 51 - 28 01- 0
Telefax +49 (0) 20 51 - 28 01-50
www.haps.de
DIN EN ISO9001:2008
Ze r t i f i z i e r t e s
Qu
al i t ä t s m a n a g e m e n t s
yste
m
Dynamics, which you daily feel.Since 75 years.
We
rese
rve
the
righ
t to
mak
e te
chni
cal c
hang
es.
We
acce
pt n
o re
spon
sibi
lity
for
erro
rs a
nd p
rint
ing
erro
rs.
– A
0220
12/B
-GB