WWW.APPLIEDAU.COM

FOR ALL YOUR TRUCKING NEEDS

At Applied Industrial Technologies®, we understand the demands of the trucking industry and aim to deliver quality parts and services to your door.

We align ourselves with premium trucking suppliers such as SKF, Contitech, Optibelt, Eaton and Castrol, providing our customers with a superior range of truck components and services to ensure you are back on the road in no time.

WE SPECIALISE IN THE FOLLOWING:

TAPERED WHEEL BEARINGS

SCOTSEALS

TRANSMISSION BEARINGS

UNITISED HUB UNITS

AIR DRYERS

LUBRICATION SYSTEMS

LUBRICANTS & OILS

HOSE & FITTINGS

BELTS

HEAVY DUTY TRANSMISSIONS

HYDRAULICS

WWW.APPLIEDAU.COM 2

FOR ALL YOUR TRUCKING NEEDS

SKF commercial vehicle components ... better in the long run

SKF provides a wide range of components for the largest truck brands in

• North America (Kenworth, Mack, Western Star, Navistar)

• Europe (Mercedes-Benz, Volvo, Iveco, MAN, DAF, Scania)

All meet, or exceed, OE specifications, and all are available at competitive prices through the most efficient Distribution Network in the aftermarket.

TRB (TAPERED WHEEL BEARINGS)• Optimised internal geometry and contact profile

• Increased load-carrying capacity

• Noise and friction reduction

• Through-hardened rollers

BRAKEMASTER® AIR DRYERS• OEM fitment for Australia’s most popular Heavy Truck

• Handles extreme air system demands

• Ideal for transit, garbage and off-road vehicles

• Wide range of designs for a variety of applications

UNITISED TRUCK HUB UNITS• One piece design for ease of installation

• Pre-assembled, greased and sealed for long life

• Proven in the most harsh conditions in Australia

SCOTSEAL• The original one-piece unitised oil/grease seal

• OEM first fit for many heavy Truck Brands

• Metal OD (tool fit) or Rubber OD (hand fit)

• Nitrile and Duratemp (high temperature) options

TRANSMISSION BEARINGS• High quality “TQ-Line” Transmission bearings

• OEM Supplier to Volvo and Scania in Europe

• Optimised internal geometry and contact profile

WWW.APPLIEDAU.COM 3

FOR ALL YOUR TRUCKING NEEDS

SKF WHEEL BEARING AND SCOTSEAL KITS APPLICATION GUIDE

Application Scotseal Part Inner Bearing Outer Bearing Lubrication Type

STEER AXLE 35066 CLASSIC (CR35066)

HM212049/011 (SET 413)

3782/3720/Q (SET 406)

OIL/GREASE

DRIVE AXLE 47693 CLASSIC HI- TEMP (CR47693)

594 A/592 A/Q (SET 403)

580/572/Q (SET 401)

OIL

TRAILER AXLE (TAPER) 46303 PRO (CR46303)

HM 218248/10VS (SET 414)

HM 212049/011 (SET 413)

OIL/GREASE

TRAILER AXLE (PROPAR) 42623 CLASSIC (CR42623)

HM 518445/10VS (SET 415)

HM 518445/10VS (SET 415)

OIL/GREASE

TRAILER (BPW)

ECO PLUS 8-9 TON

ECO PLUS 10-12 TON

N/A VKHB 2704 MY (33118-VSM)

VKHB 2703 MY (33213-VSM)

GREASE

WWW.APPLIEDAU.COM 4

FOR ALL YOUR TRUCKING NEEDS

DUT UNIVERSAL TRUCK HOSEFast assembly with reusable fittings for hot oil applications with a temperature range of -40°F to 300°F (-40°C to 149°C). Available in sizes -04 (3/16") through -20 (11/8") I.D.

AIR BRAKE HOSEFor compressed air brake systems more commonly found on heavy-duty trucks.

SILICONE HEATER HOSESilicone heater hose is used for coolant transfer applications and higher-temperature service.

SILICONE CHARGE AIR COOLER HOSEHandles slight misalignment between components and helps isolate vibration within air cooler system.

STRAIGHT RADIATOR HOSE WITH XTREME HEAT TECHNOLOGYDesigned for common coolants and straight radiator connections where higher heat resistance and longer life are desired.

HEAVY-DUTY STRAIGHT RADIATOR HOSEDesigned with an extra heavy carcass to be used with automotive coolants for straight connections under severe conditions usually found on construction and off-road vehicle applications.

BLUE HEATER HOSE WITH XTREME HEAT TECHNOLOGYFor heater hose applications that endure higher underhood temperatures and require a higher heat resistance.

CONTITECH

HOSE

ADDITIONAL HOSE

Straight Radiator Hose with Xtreme Heat Technology

Designed for common coolants and straight radiator connections where higher heat resistance and longer life are desired.

Belts

Elite® Truck Belts

Manufactured with EPDM rubber compound technology. Elite® Heavy Duty belts feature a polyester tensile cord and helicog profile for the tough demands of heavy-duty drives.

Truck Belt with Torque Team®

Technology

Multiple belts joined by a tough rubber backing. Belts pull together as a perfectly matched team.

Truck Refrigeration Belts

Especially designed for truck and trailer refrigeration units. Special constructions are available. Made especially for certain brands of refrigeration units.

Elite® Poly-V®

› Quiet Channel Technology™ – Unique profile and advanced rubber compounds virtually eliminate noise.

› Greater wear-resistance – High-strength, specially treated tension members maintain tension and control elongation.

› Exceptional belt life – Flexible, cooler-running and longer-lasting.

Elite® Auto V-Belts

› High-strength tension members – Resist shockload failure and ensure uniform performance over belt life.

› Tough, synthetic helicogs – Greater flexibility to reduce cushion cracking and fatigue.

› Full V design – Positive, no-slip contact with pulley grooves for reliable energy transfer.

› Matchmaker Technology™ assures every belt is the same length and can be used in a matched set.

Blue Heater Hose with Xtreme Heat Technology

For heater hose applications that endure higher underhood temperatures and require a higher heat resistance.

Air Brake Hose

For compressed air brake systems more commonly found on heavy-duty trucks.

GUT Universal Truck Hose

Fast assembly with reusable fittings for hot oil applications with a temperature range of -40°F to 300°F (-40°C to 149°C). Available in sizes -04 (3/16") through -20 (11/8") I.D.

Silicone Heater Hose

Silicone heater hose is used for coolant transfer applications and higher-temperature service.

Silicone Charge Air Cooler Hose

Handles slight misalignment between components and helps isolate vibration within air cooler system.

Silicone Charge Air Straight Sleeve Hose

Short, flexible connector between the air intake and the turbocharger.

Heavy-Duty Straight Radiator Hose

Designed with an extra heavy carcass to be used with automotive coolants for straight connections under severe conditions usually found on construction and off-road vehicle applications.

› Transmission Oil Cooler Hose – Connect add-on and external transmission oil coolers in cars or trucks.

› Power Brake Vacuum Hose Heavy Wall – Fits most brake systems on trucks, trailers and construction equipment; resists collapsing or deforming.

Light Wall – Light-duty hose specifically designed for power brake vacuum applications on cars and light-duty trucks.

Additional Hose

One Source.

Continental ContiTech Hydraulic Hose and FittingsOne Source provides the hose and fittings that meet global performance standards, including ISO, EN, JIC, BSP, SAE, DIN/EN and JIS, as well as needing USCG, USMSHA, API and ABS approval agency requirements.

We offer the resources hydraulic customers need

Choose us as your sole supplier for hydraulic assembly components, including hoses, fittings, adapters and the method of assembly. Because, whatever your application – construction, agriculture, oil and gas, manufacturing, transportation – our broad selection will connect you with a high-quality, reliable hydraulic hose assembly system. And you can trust that our products meet these global performance standards: SAE, DIN, JIS, USCG, ABS and US MSHA.

Not only are our hydraulic hose products designed to make a very literal connection – to each other and to your equipment – our network of distributors is at the ready to connect with you and your business needs. And we strive to do it all in the most friendly and efficient manner possible.

Being easy to work with can really be a differentiator in the hydraulic hose market. We know this and will always do our best to make sure your business is treated with the attention and care it deserves. That is our commitment to you.

One Solution.

Continental ContiTech Perma-Crimp™ SystemOne Solution that produces a high-quality, reliable hydraulic hose assembly.

Assembly Systems That Perform

One System.

Continental ContiTech Hydraulic EquipmentOne System includes a broad selection of hydraulic assembly equipment.

Full-Line Products, Full-Service Growth

Fleet Applications› SR5 (SAE 100R5)› DR5 (high temperature service)› GUT (SAE J1402 Type A1)› Air conditioning hose› Military vehicles

Hose

› Molded Radiator Hose, Heater Hose and Molded Bypass – Transfer glycol-based coolants in the vehicle’s coolant system, or bypass to the radiator.

› Fuel Line/PCV/Emission Control Hose SAE 30R7 A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.

› Fuel injection Hose SAE 30R9 CARB-approved and specifically designed for auto and truck fuel-injection systems.

Straight Radiator Hose with Xtreme Heat Technology

Designed for common coolants and straight radiator connections where higher heat resistance and longer life are desired.

Belts

Elite® Truck Belts

Manufactured with EPDM rubber compound technology. Elite® Heavy Duty belts feature a polyester tensile cord and helicog profile for the tough demands of heavy-duty drives.

Truck Belt with Torque Team®

Technology

Multiple belts joined by a tough rubber backing. Belts pull together as a perfectly matched team.

Truck Refrigeration Belts

Especially designed for truck and trailer refrigeration units. Special constructions are available. Made especially for certain brands of refrigeration units.

Elite® Poly-V®

› Quiet Channel Technology™ – Unique profile and advanced rubber compounds virtually eliminate noise.

› Greater wear-resistance – High-strength, specially treated tension members maintain tension and control elongation.

› Exceptional belt life – Flexible, cooler-running and longer-lasting.

Elite® Auto V-Belts

› High-strength tension members – Resist shockload failure and ensure uniform performance over belt life.

› Tough, synthetic helicogs – Greater flexibility to reduce cushion cracking and fatigue.

› Full V design – Positive, no-slip contact with pulley grooves for reliable energy transfer.

› Matchmaker Technology™ assures every belt is the same length and can be used in a matched set.

Blue Heater Hose with Xtreme Heat Technology

For heater hose applications that endure higher underhood temperatures and require a higher heat resistance.

Air Brake Hose

For compressed air brake systems more commonly found on heavy-duty trucks.

GUT Universal Truck Hose

Fast assembly with reusable fittings for hot oil applications with a temperature range of -40°F to 300°F (-40°C to 149°C). Available in sizes -04 (3/16") through -20 (11/8") I.D.

Silicone Heater Hose

Silicone heater hose is used for coolant transfer applications and higher-temperature service.

Silicone Charge Air Cooler Hose

Handles slight misalignment between components and helps isolate vibration within air cooler system.

Silicone Charge Air Straight Sleeve Hose

Short, flexible connector between the air intake and the turbocharger.

Heavy-Duty Straight Radiator Hose

Designed with an extra heavy carcass to be used with automotive coolants for straight connections under severe conditions usually found on construction and off-road vehicle applications.

› Transmission Oil Cooler Hose – Connect add-on and external transmission oil coolers in cars or trucks.

› Power Brake Vacuum Hose Heavy Wall – Fits most brake systems on trucks, trailers and construction equipment; resists collapsing or deforming.

Light Wall – Light-duty hose specifically designed for power brake vacuum applications on cars and light-duty trucks.

Additional Hose

One Source.

Continental ContiTech Hydraulic Hose and FittingsOne Source provides the hose and fittings that meet global performance standards, including ISO, EN, JIC, BSP, SAE, DIN/EN and JIS, as well as needing USCG, USMSHA, API and ABS approval agency requirements.

We offer the resources hydraulic customers need

Choose us as your sole supplier for hydraulic assembly components, including hoses, fittings, adapters and the method of assembly. Because, whatever your application – construction, agriculture, oil and gas, manufacturing, transportation – our broad selection will connect you with a high-quality, reliable hydraulic hose assembly system. And you can trust that our products meet these global performance standards: SAE, DIN, JIS, USCG, ABS and US MSHA.

Not only are our hydraulic hose products designed to make a very literal connection – to each other and to your equipment – our network of distributors is at the ready to connect with you and your business needs. And we strive to do it all in the most friendly and efficient manner possible.

Being easy to work with can really be a differentiator in the hydraulic hose market. We know this and will always do our best to make sure your business is treated with the attention and care it deserves. That is our commitment to you.

One Solution.

Continental ContiTech Perma-Crimp™ SystemOne Solution that produces a high-quality, reliable hydraulic hose assembly.

Assembly Systems That Perform

One System.

Continental ContiTech Hydraulic EquipmentOne System includes a broad selection of hydraulic assembly equipment.

Full-Line Products, Full-Service Growth

Fleet Applications› SR5 (SAE 100R5)› DR5 (high temperature service)› GUT (SAE J1402 Type A1)› Air conditioning hose› Military vehicles

Hose

› Molded Radiator Hose, Heater Hose and Molded Bypass – Transfer glycol-based coolants in the vehicle’s coolant system, or bypass to the radiator.

› Fuel Line/PCV/Emission Control Hose SAE 30R7 A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.

› Fuel injection Hose SAE 30R9 CARB-approved and specifically designed for auto and truck fuel-injection systems.

Straight Radiator Hose with Xtreme Heat Technology

Designed for common coolants and straight radiator connections where higher heat resistance and longer life are desired.

Belts

Elite® Truck Belts

Manufactured with EPDM rubber compound technology. Elite® Heavy Duty belts feature a polyester tensile cord and helicog profile for the tough demands of heavy-duty drives.

Truck Belt with Torque Team®

Technology

Multiple belts joined by a tough rubber backing. Belts pull together as a perfectly matched team.

Truck Refrigeration Belts

Especially designed for truck and trailer refrigeration units. Special constructions are available. Made especially for certain brands of refrigeration units.

Elite® Poly-V®

› Quiet Channel Technology™ – Unique profile and advanced rubber compounds virtually eliminate noise.

› Greater wear-resistance – High-strength, specially treated tension members maintain tension and control elongation.

› Exceptional belt life – Flexible, cooler-running and longer-lasting.

Elite® Auto V-Belts

› High-strength tension members – Resist shockload failure and ensure uniform performance over belt life.

› Tough, synthetic helicogs – Greater flexibility to reduce cushion cracking and fatigue.

› Full V design – Positive, no-slip contact with pulley grooves for reliable energy transfer.

› Matchmaker Technology™ assures every belt is the same length and can be used in a matched set.

Blue Heater Hose with Xtreme Heat Technology

For heater hose applications that endure higher underhood temperatures and require a higher heat resistance.

Air Brake Hose

For compressed air brake systems more commonly found on heavy-duty trucks.

GUT Universal Truck Hose

Fast assembly with reusable fittings for hot oil applications with a temperature range of -40°F to 300°F (-40°C to 149°C). Available in sizes -04 (3/16") through -20 (11/8") I.D.

Silicone Heater Hose

Silicone heater hose is used for coolant transfer applications and higher-temperature service.

Silicone Charge Air Cooler Hose

Handles slight misalignment between components and helps isolate vibration within air cooler system.

Silicone Charge Air Straight Sleeve Hose

Short, flexible connector between the air intake and the turbocharger.

Heavy-Duty Straight Radiator Hose

Designed with an extra heavy carcass to be used with automotive coolants for straight connections under severe conditions usually found on construction and off-road vehicle applications.

› Transmission Oil Cooler Hose – Connect add-on and external transmission oil coolers in cars or trucks.

› Power Brake Vacuum Hose Heavy Wall – Fits most brake systems on trucks, trailers and construction equipment; resists collapsing or deforming.

Light Wall – Light-duty hose specifically designed for power brake vacuum applications on cars and light-duty trucks.

Additional Hose

One Source.

Continental ContiTech Hydraulic Hose and FittingsOne Source provides the hose and fittings that meet global performance standards, including ISO, EN, JIC, BSP, SAE, DIN/EN and JIS, as well as needing USCG, USMSHA, API and ABS approval agency requirements.

We offer the resources hydraulic customers need

Choose us as your sole supplier for hydraulic assembly components, including hoses, fittings, adapters and the method of assembly. Because, whatever your application – construction, agriculture, oil and gas, manufacturing, transportation – our broad selection will connect you with a high-quality, reliable hydraulic hose assembly system. And you can trust that our products meet these global performance standards: SAE, DIN, JIS, USCG, ABS and US MSHA.

Not only are our hydraulic hose products designed to make a very literal connection – to each other and to your equipment – our network of distributors is at the ready to connect with you and your business needs. And we strive to do it all in the most friendly and efficient manner possible.

Being easy to work with can really be a differentiator in the hydraulic hose market. We know this and will always do our best to make sure your business is treated with the attention and care it deserves. That is our commitment to you.

One Solution.

Continental ContiTech Perma-Crimp™ SystemOne Solution that produces a high-quality, reliable hydraulic hose assembly.

Assembly Systems That Perform

One System.

Continental ContiTech Hydraulic EquipmentOne System includes a broad selection of hydraulic assembly equipment.

Full-Line Products, Full-Service Growth

Fleet Applications› SR5 (SAE 100R5)› DR5 (high temperature service)› GUT (SAE J1402 Type A1)› Air conditioning hose› Military vehicles

Hose

› Molded Radiator Hose, Heater Hose and Molded Bypass – Transfer glycol-based coolants in the vehicle’s coolant system, or bypass to the radiator.

› Fuel Line/PCV/Emission Control Hose SAE 30R7 A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.

› Fuel injection Hose SAE 30R9 CARB-approved and specifically designed for auto and truck fuel-injection systems.

Straight Radiator Hose with Xtreme Heat Technology

Designed for common coolants and straight radiator connections where higher heat resistance and longer life are desired.

Belts

Elite® Truck Belts

Manufactured with EPDM rubber compound technology. Elite® Heavy Duty belts feature a polyester tensile cord and helicog profile for the tough demands of heavy-duty drives.

Truck Belt with Torque Team®

Technology

Multiple belts joined by a tough rubber backing. Belts pull together as a perfectly matched team.

Truck Refrigeration Belts

Especially designed for truck and trailer refrigeration units. Special constructions are available. Made especially for certain brands of refrigeration units.

Elite® Poly-V®

› Quiet Channel Technology™ – Unique profile and advanced rubber compounds virtually eliminate noise.

› Greater wear-resistance – High-strength, specially treated tension members maintain tension and control elongation.

› Exceptional belt life – Flexible, cooler-running and longer-lasting.

Elite® Auto V-Belts

› High-strength tension members – Resist shockload failure and ensure uniform performance over belt life.

› Tough, synthetic helicogs – Greater flexibility to reduce cushion cracking and fatigue.

› Full V design – Positive, no-slip contact with pulley grooves for reliable energy transfer.

› Matchmaker Technology™ assures every belt is the same length and can be used in a matched set.

Blue Heater Hose with Xtreme Heat Technology

For heater hose applications that endure higher underhood temperatures and require a higher heat resistance.

Air Brake Hose

For compressed air brake systems more commonly found on heavy-duty trucks.

GUT Universal Truck Hose

Fast assembly with reusable fittings for hot oil applications with a temperature range of -40°F to 300°F (-40°C to 149°C). Available in sizes -04 (3/16") through -20 (11/8") I.D.

Silicone Heater Hose

Silicone heater hose is used for coolant transfer applications and higher-temperature service.

Silicone Charge Air Cooler Hose

Handles slight misalignment between components and helps isolate vibration within air cooler system.

Silicone Charge Air Straight Sleeve Hose

Short, flexible connector between the air intake and the turbocharger.

Heavy-Duty Straight Radiator Hose

Designed with an extra heavy carcass to be used with automotive coolants for straight connections under severe conditions usually found on construction and off-road vehicle applications.

› Transmission Oil Cooler Hose – Connect add-on and external transmission oil coolers in cars or trucks.

› Power Brake Vacuum Hose Heavy Wall – Fits most brake systems on trucks, trailers and construction equipment; resists collapsing or deforming.

Light Wall – Light-duty hose specifically designed for power brake vacuum applications on cars and light-duty trucks.

Additional Hose

One Source.

Continental ContiTech Hydraulic Hose and FittingsOne Source provides the hose and fittings that meet global performance standards, including ISO, EN, JIC, BSP, SAE, DIN/EN and JIS, as well as needing USCG, USMSHA, API and ABS approval agency requirements.

We offer the resources hydraulic customers need

Choose us as your sole supplier for hydraulic assembly components, including hoses, fittings, adapters and the method of assembly. Because, whatever your application – construction, agriculture, oil and gas, manufacturing, transportation – our broad selection will connect you with a high-quality, reliable hydraulic hose assembly system. And you can trust that our products meet these global performance standards: SAE, DIN, JIS, USCG, ABS and US MSHA.

Not only are our hydraulic hose products designed to make a very literal connection – to each other and to your equipment – our network of distributors is at the ready to connect with you and your business needs. And we strive to do it all in the most friendly and efficient manner possible.

Being easy to work with can really be a differentiator in the hydraulic hose market. We know this and will always do our best to make sure your business is treated with the attention and care it deserves. That is our commitment to you.

One Solution.

Continental ContiTech Perma-Crimp™ SystemOne Solution that produces a high-quality, reliable hydraulic hose assembly.

Assembly Systems That Perform

One System.

Continental ContiTech Hydraulic EquipmentOne System includes a broad selection of hydraulic assembly equipment.

Full-Line Products, Full-Service Growth

Fleet Applications› SR5 (SAE 100R5)› DR5 (high temperature service)› GUT (SAE J1402 Type A1)› Air conditioning hose› Military vehicles

Hose

› Molded Radiator Hose, Heater Hose and Molded Bypass – Transfer glycol-based coolants in the vehicle’s coolant system, or bypass to the radiator.

› Fuel Line/PCV/Emission Control Hose SAE 30R7 A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.

› Fuel injection Hose SAE 30R9 CARB-approved and specifically designed for auto and truck fuel-injection systems.

Straight Radiator Hose with Xtreme Heat Technology

Designed for common coolants and straight radiator connections where higher heat resistance and longer life are desired.

Belts

Elite® Truck Belts

Manufactured with EPDM rubber compound technology. Elite® Heavy Duty belts feature a polyester tensile cord and helicog profile for the tough demands of heavy-duty drives.

Truck Belt with Torque Team®

Technology

Multiple belts joined by a tough rubber backing. Belts pull together as a perfectly matched team.

Truck Refrigeration Belts

Especially designed for truck and trailer refrigeration units. Special constructions are available. Made especially for certain brands of refrigeration units.

Elite® Poly-V®

› Quiet Channel Technology™ – Unique profile and advanced rubber compounds virtually eliminate noise.

› Greater wear-resistance – High-strength, specially treated tension members maintain tension and control elongation.

› Exceptional belt life – Flexible, cooler-running and longer-lasting.

Elite® Auto V-Belts

› High-strength tension members – Resist shockload failure and ensure uniform performance over belt life.

› Tough, synthetic helicogs – Greater flexibility to reduce cushion cracking and fatigue.

› Full V design – Positive, no-slip contact with pulley grooves for reliable energy transfer.

› Matchmaker Technology™ assures every belt is the same length and can be used in a matched set.

Blue Heater Hose with Xtreme Heat Technology

For heater hose applications that endure higher underhood temperatures and require a higher heat resistance.

Air Brake Hose

For compressed air brake systems more commonly found on heavy-duty trucks.

GUT Universal Truck Hose

Fast assembly with reusable fittings for hot oil applications with a temperature range of -40°F to 300°F (-40°C to 149°C). Available in sizes -04 (3/16") through -20 (11/8") I.D.

Silicone Heater Hose

Silicone heater hose is used for coolant transfer applications and higher-temperature service.

Silicone Charge Air Cooler Hose

Handles slight misalignment between components and helps isolate vibration within air cooler system.

Silicone Charge Air Straight Sleeve Hose

Short, flexible connector between the air intake and the turbocharger.

Heavy-Duty Straight Radiator Hose

Designed with an extra heavy carcass to be used with automotive coolants for straight connections under severe conditions usually found on construction and off-road vehicle applications.

› Transmission Oil Cooler Hose – Connect add-on and external transmission oil coolers in cars or trucks.

› Power Brake Vacuum Hose Heavy Wall – Fits most brake systems on trucks, trailers and construction equipment; resists collapsing or deforming.

Light Wall – Light-duty hose specifically designed for power brake vacuum applications on cars and light-duty trucks.

Additional Hose

One Source.

Continental ContiTech Hydraulic Hose and FittingsOne Source provides the hose and fittings that meet global performance standards, including ISO, EN, JIC, BSP, SAE, DIN/EN and JIS, as well as needing USCG, USMSHA, API and ABS approval agency requirements.

We offer the resources hydraulic customers need

Choose us as your sole supplier for hydraulic assembly components, including hoses, fittings, adapters and the method of assembly. Because, whatever your application – construction, agriculture, oil and gas, manufacturing, transportation – our broad selection will connect you with a high-quality, reliable hydraulic hose assembly system. And you can trust that our products meet these global performance standards: SAE, DIN, JIS, USCG, ABS and US MSHA.

Not only are our hydraulic hose products designed to make a very literal connection – to each other and to your equipment – our network of distributors is at the ready to connect with you and your business needs. And we strive to do it all in the most friendly and efficient manner possible.

Being easy to work with can really be a differentiator in the hydraulic hose market. We know this and will always do our best to make sure your business is treated with the attention and care it deserves. That is our commitment to you.

One Solution.

Continental ContiTech Perma-Crimp™ SystemOne Solution that produces a high-quality, reliable hydraulic hose assembly.

Assembly Systems That Perform

One System.

Continental ContiTech Hydraulic EquipmentOne System includes a broad selection of hydraulic assembly equipment.

Full-Line Products, Full-Service Growth

Fleet Applications› SR5 (SAE 100R5)› DR5 (high temperature service)› GUT (SAE J1402 Type A1)› Air conditioning hose› Military vehicles

Hose

› Molded Radiator Hose, Heater Hose and Molded Bypass – Transfer glycol-based coolants in the vehicle’s coolant system, or bypass to the radiator.

› Fuel Line/PCV/Emission Control Hose SAE 30R7 A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.

› Fuel injection Hose SAE 30R9 CARB-approved and specifically designed for auto and truck fuel-injection systems.

Straight Radiator Hose with Xtreme Heat Technology

Designed for common coolants and straight radiator connections where higher heat resistance and longer life are desired.

Belts

Elite® Truck Belts

Manufactured with EPDM rubber compound technology. Elite® Heavy Duty belts feature a polyester tensile cord and helicog profile for the tough demands of heavy-duty drives.

Truck Belt with Torque Team®

Technology

Multiple belts joined by a tough rubber backing. Belts pull together as a perfectly matched team.

Truck Refrigeration Belts

Especially designed for truck and trailer refrigeration units. Special constructions are available. Made especially for certain brands of refrigeration units.

Elite® Poly-V®

› Quiet Channel Technology™ – Unique profile and advanced rubber compounds virtually eliminate noise.

› Greater wear-resistance – High-strength, specially treated tension members maintain tension and control elongation.

› Exceptional belt life – Flexible, cooler-running and longer-lasting.

Elite® Auto V-Belts

› High-strength tension members – Resist shockload failure and ensure uniform performance over belt life.

› Tough, synthetic helicogs – Greater flexibility to reduce cushion cracking and fatigue.

› Full V design – Positive, no-slip contact with pulley grooves for reliable energy transfer.

› Matchmaker Technology™ assures every belt is the same length and can be used in a matched set.

Blue Heater Hose with Xtreme Heat Technology

For heater hose applications that endure higher underhood temperatures and require a higher heat resistance.

Air Brake Hose

For compressed air brake systems more commonly found on heavy-duty trucks.

GUT Universal Truck Hose

Fast assembly with reusable fittings for hot oil applications with a temperature range of -40°F to 300°F (-40°C to 149°C). Available in sizes -04 (3/16") through -20 (11/8") I.D.

Silicone Heater Hose

Silicone heater hose is used for coolant transfer applications and higher-temperature service.

Silicone Charge Air Cooler Hose

Handles slight misalignment between components and helps isolate vibration within air cooler system.

Silicone Charge Air Straight Sleeve Hose

Short, flexible connector between the air intake and the turbocharger.

Heavy-Duty Straight Radiator Hose

Designed with an extra heavy carcass to be used with automotive coolants for straight connections under severe conditions usually found on construction and off-road vehicle applications.

› Transmission Oil Cooler Hose – Connect add-on and external transmission oil coolers in cars or trucks.

› Power Brake Vacuum Hose Heavy Wall – Fits most brake systems on trucks, trailers and construction equipment; resists collapsing or deforming.

Light Wall – Light-duty hose specifically designed for power brake vacuum applications on cars and light-duty trucks.

Additional Hose

One Source.

Continental ContiTech Hydraulic Hose and FittingsOne Source provides the hose and fittings that meet global performance standards, including ISO, EN, JIC, BSP, SAE, DIN/EN and JIS, as well as needing USCG, USMSHA, API and ABS approval agency requirements.

We offer the resources hydraulic customers need

Choose us as your sole supplier for hydraulic assembly components, including hoses, fittings, adapters and the method of assembly. Because, whatever your application – construction, agriculture, oil and gas, manufacturing, transportation – our broad selection will connect you with a high-quality, reliable hydraulic hose assembly system. And you can trust that our products meet these global performance standards: SAE, DIN, JIS, USCG, ABS and US MSHA.

Not only are our hydraulic hose products designed to make a very literal connection – to each other and to your equipment – our network of distributors is at the ready to connect with you and your business needs. And we strive to do it all in the most friendly and efficient manner possible.

Being easy to work with can really be a differentiator in the hydraulic hose market. We know this and will always do our best to make sure your business is treated with the attention and care it deserves. That is our commitment to you.

One Solution.

Continental ContiTech Perma-Crimp™ SystemOne Solution that produces a high-quality, reliable hydraulic hose assembly.

Assembly Systems That Perform

One System.

Continental ContiTech Hydraulic EquipmentOne System includes a broad selection of hydraulic assembly equipment.

Full-Line Products, Full-Service Growth

Fleet Applications› SR5 (SAE 100R5)› DR5 (high temperature service)› GUT (SAE J1402 Type A1)› Air conditioning hose› Military vehicles

Hose

› Molded Radiator Hose, Heater Hose and Molded Bypass – Transfer glycol-based coolants in the vehicle’s coolant system, or bypass to the radiator.

› Fuel Line/PCV/Emission Control Hose SAE 30R7 A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.

› Fuel injection Hose SAE 30R9 CARB-approved and specifically designed for auto and truck fuel-injection systems.

Straight Radiator Hose with Xtreme Heat Technology

Designed for common coolants and straight radiator connections where higher heat resistance and longer life are desired.

Belts

Elite® Truck Belts

Manufactured with EPDM rubber compound technology. Elite® Heavy Duty belts feature a polyester tensile cord and helicog profile for the tough demands of heavy-duty drives.

Truck Belt with Torque Team®

Technology

Multiple belts joined by a tough rubber backing. Belts pull together as a perfectly matched team.

Truck Refrigeration Belts

Especially designed for truck and trailer refrigeration units. Special constructions are available. Made especially for certain brands of refrigeration units.

Elite® Poly-V®

› Quiet Channel Technology™ – Unique profile and advanced rubber compounds virtually eliminate noise.

› Greater wear-resistance – High-strength, specially treated tension members maintain tension and control elongation.

› Exceptional belt life – Flexible, cooler-running and longer-lasting.

Elite® Auto V-Belts

› High-strength tension members – Resist shockload failure and ensure uniform performance over belt life.

› Tough, synthetic helicogs – Greater flexibility to reduce cushion cracking and fatigue.

› Full V design – Positive, no-slip contact with pulley grooves for reliable energy transfer.

› Matchmaker Technology™ assures every belt is the same length and can be used in a matched set.

Blue Heater Hose with Xtreme Heat Technology

For heater hose applications that endure higher underhood temperatures and require a higher heat resistance.

Air Brake Hose

For compressed air brake systems more commonly found on heavy-duty trucks.

GUT Universal Truck Hose

Fast assembly with reusable fittings for hot oil applications with a temperature range of -40°F to 300°F (-40°C to 149°C). Available in sizes -04 (3/16") through -20 (11/8") I.D.

Silicone Heater Hose

Silicone heater hose is used for coolant transfer applications and higher-temperature service.

Silicone Charge Air Cooler Hose

Handles slight misalignment between components and helps isolate vibration within air cooler system.

Silicone Charge Air Straight Sleeve Hose

Short, flexible connector between the air intake and the turbocharger.

Heavy-Duty Straight Radiator Hose

Designed with an extra heavy carcass to be used with automotive coolants for straight connections under severe conditions usually found on construction and off-road vehicle applications.

› Transmission Oil Cooler Hose – Connect add-on and external transmission oil coolers in cars or trucks.

› Power Brake Vacuum Hose Heavy Wall – Fits most brake systems on trucks, trailers and construction equipment; resists collapsing or deforming.

Light Wall – Light-duty hose specifically designed for power brake vacuum applications on cars and light-duty trucks.

Additional Hose

One Source.

Continental ContiTech Hydraulic Hose and FittingsOne Source provides the hose and fittings that meet global performance standards, including ISO, EN, JIC, BSP, SAE, DIN/EN and JIS, as well as needing USCG, USMSHA, API and ABS approval agency requirements.

We offer the resources hydraulic customers need

Choose us as your sole supplier for hydraulic assembly components, including hoses, fittings, adapters and the method of assembly. Because, whatever your application – construction, agriculture, oil and gas, manufacturing, transportation – our broad selection will connect you with a high-quality, reliable hydraulic hose assembly system. And you can trust that our products meet these global performance standards: SAE, DIN, JIS, USCG, ABS and US MSHA.

Not only are our hydraulic hose products designed to make a very literal connection – to each other and to your equipment – our network of distributors is at the ready to connect with you and your business needs. And we strive to do it all in the most friendly and efficient manner possible.

Being easy to work with can really be a differentiator in the hydraulic hose market. We know this and will always do our best to make sure your business is treated with the attention and care it deserves. That is our commitment to you.

One Solution.

Continental ContiTech Perma-Crimp™ SystemOne Solution that produces a high-quality, reliable hydraulic hose assembly.

Assembly Systems That Perform

One System.

Continental ContiTech Hydraulic EquipmentOne System includes a broad selection of hydraulic assembly equipment.

Full-Line Products, Full-Service Growth

Fleet Applications› SR5 (SAE 100R5)› DR5 (high temperature service)› GUT (SAE J1402 Type A1)› Air conditioning hose› Military vehicles

Hose

› Molded Radiator Hose, Heater Hose and Molded Bypass – Transfer glycol-based coolants in the vehicle’s coolant system, or bypass to the radiator.

› Fuel Line/PCV/Emission Control Hose SAE 30R7 A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.

› Fuel injection Hose SAE 30R9 CARB-approved and specifically designed for auto and truck fuel-injection systems.

FUEL LINE/PCV/EMISSION CONTROL HOSE SAE 30R7

A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.

FUEL INJECTION HOSE SAE 30R9

CARB-approved and specifically designed for auto and truck fuel-injection systems.

TRANSMISSION OIL COOLER HOSE

Connect add-on and external transmission oil coolers in cars or trucks.

POWER BRAKE VACUUM HOSE

Heavy Wall – Fits most brake systems on trucks, trailers and construction equipment; resists collapsing or deforming.

Light Wall – Light-duty hose specifically designed for power brake vacuum applications on cars and light-duty trucks.

WWW.APPLIEDAU.COM 5

FOR ALL YOUR TRUCKING NEEDS

CASTROL

CASTROL RX SUPER 15W-40For mixed fleets without DPF’s. Improved performance over API CI-4 oils by providing excellent soot handling, oil consumption control and engine wear benefits.

KEY FEATURES

• Superior viscosity stability ensuring extra margin of safety against soot related wear.

• High shear stable polymer (VI improver) that improves engine protection and extends engine life.

• Exceptional piston deposit control minimising oil consumption.

CASTROL AXLE AP 85W140High quality, mineral oil based, multipurpose gear oil for use in light and heavy duty truck conventional differentials, final drives, non-synchronised manual transmissions and steering gears. Not recommended for manual transmission manufacturers who prefer non EP (Extreme Pressure) additive containing oils.

KEY FEATURES

• Formulated to be particularly stable under high temperature operating conditions and resist degradation which can lead to deposits which reduce oil seal and overall equipment life.

• Provides high oil film and wear protection which ensures components are protected even under severe operating conditions and thus prolongs equipment life.

CASTROL PREMIUM HEAVY DUTYA high temperature multipurpose lithium complex grease designed for plain and roller bearing applications operating at temperatures beyond the limits of conventional Lithium greases.

KEY FEATURES

• Excellent thermal stability and wide temperature range.

• Reduced oil separation and resistance to hardening under pressure.

• High load carry capacity.

• Good water resistance.

• Excellent EP and anti-wear properties – protects equipment against extreme loading and assists in minimising bearing component wear.

• An optimised combination of Lithium thickener, highly refined base oil and specially selected base oil offers excellent all-round operating performance.

CASTROL RX MAX 15W-40Specially formulated with DurashieldTM Boosters that give up to 40% less wear for longer engine life*.

KEY FEATURES

• Preventing the agglomeration of soot as well as removing harmful soot particles from metal surfaces.

• Providing a protective film on the moving metal surfaces which resists breakdown even under difficult conditions, maintaining the film layer.

• Delivering improved deposit and corrosion protection by resisting thermal breakdown of the oil and by neutralising harmful acids.

* Based on engine cam wear performance vs. API CJ-4 industry limits.

Additional RX products in the Castrol product portfolio include Castrol RX DIESEL, 15W-40, Castrol RX MONO 30 & 40, Castrol RX MONO DD 40 & 50.

CASTROL TFC 400 SERIESThe Castrol TFC 400 SERIES range is specifically formulated with highly refined mineral oil for use in powershift transmissions, direct drive transmissions, wet disc brakes, final drives and differentials in off road machinery where Caterpillar TO-4 is required. Castrol TFC range is available in a range of viscosities that include TFC 410, TFC 430,TFC 450 & TFC 460.

KEY FEATURES

• Excellent oxidation stability maintains high temperature performance and transmission cleanliness during the service life.

• Stable friction characteristics eliminate slippage and reduce brake noise.

• Excellent friction performance with a wide range of friction materials ensures smooth positive changes and enhanced friction material durability.

• Improved wear performance extends component life.

WWW.APPLIEDAU.COM 6

FOR ALL YOUR TRUCKING NEEDS

EATON

IT’S WHAT’S INSIDE THAT COUNTS.

Whether you cover 500 miles a day or make 500 stops, your heavy truck has to handle the stress of constant use. The world’s largest manufacturers of these vehicles trust Eaton parts and systems to provide reliable results. So can you.

Our components are used in all kinds of vehicles: over-the-road trucks, passenger buses, heavy service vans, emergency vehicles, utility trucks, concrete mixers—even military vehicles designed for the most extreme conditions of all.

With Eaton on the inside, you get consistent performance to succeed and finish the job. And, where reliable hydraulic components and systems are required, you’ll find Eaton.

• Emergency services rely on Eaton products in their mission-critical vehicles

• Refuse and recycling haulers increase productivity and reduce operating costs with Eaton systems and solutions

• Eaton Mixers help Transit mixers run smoothly day after day

• Municipalities and fleets, count on Eaton products to keep critical jobs and public transportation “on time”

Eaton has a comprehensive portfolio of hydraulics to meet your needs

HEAVY DUTY TRANSMISSIONSRobust Eaton heavy duty transmissions keep transmit mixers running with world class reliability, even in the toughest environmental conditions.

HOSE TUBE COMBINATIONSExperience the trusted performance of Eaton’s hose tube combinations for tight, challenging routing and STC threadless connections for tight, challenging routing and faster connections in heavy duty, on-highway trucks.

POWER-ON-DEMANDRefuse vehicles generate less emissions and consumer 10-15% less fuel when using Eaton’s load sense Power-on-Demand hydraulic systems.

HYDRAULIC LAUNCH ASSISTRealise 15-30% better fuel economy and up to 30% reduced emissions with Eaton Hydraulic Launch Assist (Hybrids) on Refuse Equipment.

PORTFOLIO SPOTLIGHT: JUST A FEW EXAMPLES WHERE WE EXCEL

WWW.APPLIEDAU.COM 7

FOR ALL YOUR TRUCKING NEEDS

OPTIBELT

Belt Profiles Benefits

TRUCK POWER MARATHON 2 M = S

In the case of multi-groove drives, due to its manufacturing tolerances, the precision ground V-belt can even be used unmeasured in the set. This can be identified by the additional specification M=S (matched sets). The characteristic of being the same in length makes handling simpler, prevents double inventory and enables extremely smooth running – especially in the case of multi-groove drives.

Furthermore, the MARATHON 2 M = S is especially low stretch and extremely durable. Its durability is around 40 – 60% higher than that of a standard belt. This enables cost effective and safe operation of the lorries and buses.

AVX 10

AVX 13

• Installed without measuring

• Reinforced construction

• High level of operational safety

• Low maintenance operation and predictable maintenance intervals

• High abrasion resistance

The Optibelt KBX Kraftbands are especially well suited for critical drive systems in commercial vehicles and buses. By means of their compact construction, vibrations of extended wheelbases can be considerably reduced. With tear resistant, transversely rigid top surface and precision-milled substructure, KBX Kraftbands serve many vehicle manufacturers as a troubleshooter on high stress drives in air compressors, air conditioning units and ventilator fans.

AVX 10 – 2 ribs

AVX 13 – 2 ribs

XPB – 2 ribs

Low maintenance operation

• Very smooth running

• No twisting in the belts

• Low level of vibration

• High abrasion resistance

The Optibelt RBK is a high performance ribbed V-belt for all modern standard ancillary component drives in commercial vehicles and buses.

By means of its high level of flexibility, this belt construction enables space to be saved when configuring ancillary components, an ever-increasing constraint in the commercial vehicles and buses of today. Tensioning systems can even be done without using additional elastic ribbed V-belts. This solution supports the automotive industry in its endeavours to achieve flexibility, light construction, and cost optimisation. Even under environmental influences such as dust, moisture and extreme temperatures, the RBK provides for secure and silent power transmission. Whether combined with modern tensioning systems or as an elastic ribbed V-belt; the RBK satisfies vehicle manufacturer requirements and achieves the highest level of operational performance.

PK • High transmission ratio

• High power transmission

• Minimum slip

• High resistance to temperature

• Low levels of noise and vibrations

• Optimised wet slip resistance

NEW SOUTH WALES QUEENSLAND SOUTH AUSTRALIA

WESTERN AUSTRALIAVICTORIA

NORTHERN TERRITORY

CONTACT AN APPLIED® REPRESENTATIVE TODAY!

22 Stamford RoadOakleigh, VIC 3166

Phone: (03) 9567 8700

APPLIEDAU.COM

443 Townsend Street Albury, NSW 2640 (02) 6041 1744 au-albury@appliedau.com

Unit 5, 46-50 Bourke Street Dubbo, NSW 2830 (02) 6882 5799 au-dubbo@appliedau.com

7/170 Sydney Road Kelso, NSW 2795 (02) 6332 2443 au-bathurst@appliedau.com

935 Botany Road Mascot, NSW 2020 (02) 9667 3770 au-mascot@appliedau.com

Unit 3, 109 Airds Road Minto, NSW 2566 (02) 9820 1088 au-minto@appliedau.com

Unit 7, 115 Batt Street Penrith, NSW 2750 (02) 4731 3268 au-penrith@appliedau.com

Unit 1, 4 Friesian Close Sandgate, NSW 2304 (02) 4960 9222 au-newcastle@appliedau.com

Unit 1, 364 Woodpark Road Smithfield, NSW 2164 (02) 9725 9200 au-smithfield@appliedau.com

282 Beatty Road Archerfield, QLD 4108 (07) 3853 1900 au-archerfield@appliedau.com

117 Lyons Street Cairns, QLD 4870 (07) 4040 9000 au-cairns@appliedau.com

Unit 1, 473 Newman Road Geebung, QLD 4034 (07) 3265 6966 au-geebung@appliedau.com

68 Hanson Road Gladstone, QLD 4680 (07) 4972 6255 au-gladstone@appliedau.com

9 Progress Drive, Paget Mackay, QLD 4740 (07) 4952 4833 au-mackay@appliedau.com

26 Marian Street Mt Isa, QLD 4825 (07) 4743 1908 au-mtisa@appliedau.com

343 Taylor Street Toowoomba, QLD 4350 (07) 4634 9140 au-toowoomba@appliedau.com

70 Pilkington Street Townsville, QLD 4810 (07) 4779 3699 au-townsville@appliedau.com

Unit 1 & 2, 7-9 Streiff Road Wingfield, SA 5013 (08) 8360 1500 au-wingfield@appliedau.com

Applied ® service centre

Applied ® distribution centre

755 Geelong Road Brooklyn, VIC 3025 (03) 9318 0699 au-brooklyn@appliedau.com

Unit 5, 2122 Hume Highway Campbellfield, VIC 3061 (03) 9308 5144 au-campbellfield@appliedau.com

Unit 2, 234 Frankston-D’nong Road Dandenong, VIC 3175 (03) 9794 8477 au-dandenong@appliedau.com

Head Office 22 Stamford Road Oakleigh, VIC 3166 (03) 9567 8700

Applied Fluid Systems & Branch 101 Pruen Road Berrimah, NT 0828 (08) 8947 1855 au-berrimah@appliedau.com

Great Southern Bearings 38 Newbey Street Albany, WA 6330 (08) 9842 1000 au-albany@appliedau.com

Northam Bearing Sales 100 Old York Road Northam, WA 6401 (08) 9622 2922 au-northam@appliedau.com

272 Welshpool Road Welshpool, WA 6106 (08) 9470 7600 au-welshpool@appliedau.com

19 Darcy Lane West Kalgoorlie, WA 6430 (08) 9091 4277 au-kalgoorlie@appliedau.com

APPLIED® LOCATIONS IN AUSTRALIA ABN 63 006 100 045

AUSTRALIA