for all your fluids - MICRO HYDRAULICS · METAFLEX ÊÃÌ> iÃÃÊÃÌii Êv À\...
Transcript of for all your fluids - MICRO HYDRAULICS · METAFLEX ÊÃÌ> iÃÃÊÃÌii Êv À\...
Hosesfor all your fluids
2
Stäubli quality and service
Our sales network is composed of highly qualified technicians. Feel free to contact them.
They can advise and recommend for you the most suitable solution, standard or customized, for your application to ensure tightness throughout the line, hoses, couplings and connecting fittings.
Discover these global solutions on www.staubli.com
- On compressed air: connection and blowing self-storing units, made to measure and ready to connect hoses,
- On breathing air:
Equipment,
devices,
Global solutions are also at your disposal in the Stäubli programme for a rational organization of working stations:
A complete programme for all your applications:
- standard, self-locking and special hoses
- flexible hoses
- equipped hoses
3
APPLICATIONS PRODUCTS CHARACTERISTICS PAGES
AIRFLEX-S Rubber hose 4
AIRTANE 5
LORPRENE Universal rubber hose 8
FLEXLOK Rubber self-locking hose 5
LORTAN Self-locking polyurethane hose for filtered and/or lubricated air 6
NYLFLEX 9
RILFLEX
TUBANE Flexible polyurethane polyester tube 7
VINYFLEX
SUPERFLEX-M Rubber hose
TRESS-FLEX Rubber hose with steel protective braid
CALOREL-EC
CALOREL-S Rubber hose for mineral based heat transfer fluids to operating temperatures
CALORLOCK 27
HALOFREE not giving off halogen gas
28
LORPRENE 8
LORTAN Self-locking polyurethane hose for industrial treated water 6
METAFLEX
NYLFLEX 9
TRESS-FLON & TRESS-FLON CONVOLUTED
CALOREL-S Rubber hose for hot oil
NERFLEX R7 - R8 - TM 23 to 26
LORPRENE Universal rubber hose for chemical products 8
METAFLEX
NERFLEX 23 to 26
NYLFLEX 9
RILFLEX
TRESS-FLON & TRESS-FLON CONVOLUTED
VINYFLEX
SUPERFLEX-M Rubber hose for liquid fuels and oils at medium pressure
TRESS-FLEX Rubber hose with protective steel braid for gas or liquid fuels
VAPOFLEX-M Synthetic rubber hose with high density steel reinforcement for saturated or dry steam
22
26
Temperatures and pressures are given for hoses only. Consult us when you equip hoses with couplings or end fittings.
Summary by applications
4
Compressed air - Tubes and hoses
Made to measure and ready to connect!Stäubli hoses are made to measure and are fitted with:
For more information, consult-us.
and twisting
Application
xx - 2398
inside Ømm
outside Ømm
M.W.P.at 20 °C
bar
M.P.A.B.at 20 °C
bar
Working temp.
°C
Radius bending
mm
Weight/metre
kg
Part-numbers
25 metre roll 50 metre roll
6 AIRFLEX-S 06 AIRFLEX-S 06/50
8 AIRFLEX-S 08 AIRFLEX-S 08/50
AIRFLEX-S 10 AIRFLEX-S 10/50
AIRFLEX-S 13 AIRFLEX-S 13/50
25.4 AIRFLEX-S 16 AIRFLEX-S 16/50
AIRFLEX-S 19 AIRFLEX-S 19/50
25 36.4 AIRFLEX-S 25
inside Ømm
Recommended Stäubli ear clamp Recommended Stäubli worm drive clamp
Part-numbers M.W.P. (bar) at 20 °C Part-numbers M.W.P. (bar) at 20 °C
6 CL 1015 ABA 8-14
8 CL 1017 ABA 11-17
CL 1018 ABA 13-20
CL 1023 ABA 15-24
CL 1027 ABA 19-28
CL 1031 ABA 22-32
25 CL 1040 ABA 26-38
Max. working pressure of hoses fitted with
Characteristics of the hose only
Composition
AIRFLEX-S
Tool to fit the hose on Stäubli profile: see on page 29.
inside Ømm
outside Ømm
M.W.P.at 20 °C
bar
M.P.A.B.at 20 °C
bar
Workingtemp
°C
Radiusbending
mm
Weight/metre
kgPart-numbers
45 72 AIRTANE 13
Characteristics of the hose only
inside Ømm
Recommended Stäubli ear clamp Recommended Stäubli worm drive clamp
Part-numbers M.W.P. (bar) at 20 °C Part-numbers M.W.P. (bar) at 20 °C
CL 1021 ABA 13-20
Max. working pressure of hoses fitted with
inside Ømm
outside Ømm
M.W.P.at 20 °C
bar
M.P.A.B.at 20 °C
bar
Workingtemp
°C
Radiusbending
mm
Weight/metre
kgPart-numbers
6.3 64 63 FLEXLOK 06/KR
9.5 64 75 FLEXLOK 10/KR
64 FLEXLOK 13/KR
23 64 FLEXLOK 16/KR
26.2 64 FLEXLOK 19/KR
5
temperatures
Applications Composition
abrasion.
Application
recommendations.
Composition
AIRTANE
FLEXLOK
Tool for fitting the hose onto Stäubli ringed profile hose stems: see page 29.
Recommendations
6
Compressed air - Tubes and hoses
inside Ø
mm
outside Ø
mm
M.W.P. at 40 °C
bar
M.P.A.B.bar
Working temp.
°C
Working temp. °C Radiusbending
mm
Weight/ metre
kgColours Part-numbers
air water
6.4 95 25 red LORTAN 06/KR
9.5blue LORTAN 10/KB
red LORTAN 10/KR
blue LORTAN 13/KB
red LORTAN 13/KR
23blue LORTAN 16/KB
red LORTAN 16/KR
Instructions
Tool to fit the hose on Stäubli profile: see on page 29.
- abrasion
Applications
Composition
with antisticking treatment.
LORTAN
Supplied length: 25 metres and multiples of 25.
inside Ø
mm
outside Ø
mm
M.W.P.bar
M.P.A.B.bar
Radiusbending
mm
Weight/ metre
kgColours
Part-numbers
25 metre rollat 23 °C at 70 °C at 23 °C at 70 °C
2.5 4 5
clear TUBANE 04
blue TUBANE 04/KB
black TUBANE 04/KN
red TUBANE 04/KR
4 6 5
clear TUBANE 06
blue TUBANE 06/KB
black TUBANE 06/KN
red TUBANE 06/KR
5.5 8 9 4.5 27 25
clear TUBANE 08
blue TUBANE 08/KB
black TUBANE 08/KN
red TUBANE 08/KR
7 8 4.4 24
clear TUBANE 10
blue TUBANE 10/KB
black TUBANE 10/KN
red TUBANE 10/KR
8 9 4.5 27 35
clear TUBANE 12
blue TUBANE 12/KB
black TUBANE 12/KN
red TUBANE 12/KR
7
Applications
control, connection to instant couplings...
TUBANE
int ext
8
Compressed air and other fluids
standards regarding diameter and pressure
6 Ω/m
Applications
vegetable oils, petrol, diesel, kerosene, light acids, alcohols...
Composition
Characteristics of the hose only
inside Ømm
outside Ømm
M.W.P.at 20 °C
bar
M.P.A.B. at 20 °C
bar
Working temp.
°C
Radius bending
mm
Weight/ metre
kg
Part-numbers
25 metre roll 50 metre roll
6 63 LORPRENE 06 LORPRENE 06/50
8 LORPRENE 08 LORPRENE 08/50
LORPRENE 10 LORPRENE 10/50
LORPRENE 13 LORPRENE 13/50
25 LORPRENE 16 LORPRENE 16/50
29 LORPRENE 19 LORPRENE 19/50
25 36 LORPRENE 25
Max. working pressure of hoses fitted with
inside Ømm
Recommended Stäubli ear clamp Recommended Stäubli worm drive clamp
Part-numbers M.W.P. (bar) at 20 °C Part-numbers M.W.P. (bar) at 20 °C
6 CL 1015 ABA 8-14
8 CL 1017 ABA 11-17
CL 1018 ABA 13-20
CL 1023 ABA 15-24
CL 1027 ABA 19-28
CL 1031 ABA 22-32
25 CL 1040 ABA 26-38
LORPRENE
: Stäubli xx 6Ω/m xx
Tool to fit the hose on Stäubli profile: see on page 29.
9
Applications
certain vegetable and mineral oils, alcohols
Characteristics of the hose only
inside Ø
mm
outside Ø
mm
M.W.P.at 20 °C
bar
M.P.A.B.at 20 °C
bar
Temp.maxi.
°C
Radius bending
mm
Weight/ metre
kgColours
Part-numbers
25 metre roll 50 metre roll
4 clear NYLFLEX 04/50
6 clear NYLFLEX 06 NYLFLEX 06/50
8 27
clear NYLFLEX 08 NYLFLEX 08/50
blue NYLFLEX 08/KB NYLFLEX 08/KB/50
red NYLFLEX 08/KR NYLFLEX 08/KR/50
37
clear NYLFLEX 10 NYLFLEX 10/50
blue NYLFLEX 10/KB NYLFLEX 10/KB/50
red NYLFLEX 10/KR NYLFLEX 10/KR/50
45
clear NYLFLEX 12 NYLFLEX 12/50
blue NYLFLEX 12/KB NYLFLEX 12/KB/50
red NYLFLEX 12/KR NYLFLEX 12/KR/50
clear NYLFLEX 13 NYLFLEX 13/50
blue NYLFLEX 13/KB NYLFLEX 13/KB/50
red NYLFLEX 13/KR NYLFLEX 13/KR/50
26 65 clear NYLFLEX 16 NYLFLEX 16/50
27 79
clear NYLFLEX 19
blue NYLFLEX 19/KB
red NYLFLEX 19/KR
25 34 48
clear NYLFLEX 25
blue NYLFLEX 25/KB
red NYLFLEX 25/KR
32 42 36 clear NYLFLEX 32
38 48 34 clear NYLFLEX 38
64 9 27 clear NYLFLEX 50
Max. working pressure of hoses fitted with
inside Ømm
Recommended Stäubli ear clamp Recommended Stäubli worm drive clamp
Part-numbers M.W.P. (bar) at 20 °C Part-numbers M.W.P. (bar) at 20 °C
4 CL 1011 ABA 8-146 CL 1013 ABA 8-148 CL 1015 ABA 11-17
CL 1018 ABA 13-20CL 1020 ABA 15-24CL 1021 ABA 15-24CL 1027 ABA 19-28CL 1028 ABA 22-32
25 CL 1037 ABA 26-3832 ABA 38-50 838 ABA 44-56 6
ABA 58-75 4
Composition
braid.
NYLFLEX
à
Tool to fit the hose on Stäubli profile: see on page 29.
inside Ømm
outside Ø mm
M.W.P. at 23 °C bar
M.P.A.B. at 23°Cbar
Working temp.°C
Radius bending mm
Part-numbers25 metre roll
2 4 24 RILFLEX 02
2.7 4 25 75 to RILFLEX 02/7
4 6 26 78 to 35 RILFLEX 04
6 8 57 to 55 RILFLEX 06
8 45 to RILFLEX 08
36 to 92 RILFLEX 10
to 82 RILFLEX 12
inside Ømm
outside Ømm
M.W.P. at 20 °C
bar
M.P.A.B. at 20 °C
bar
Working temp.°C
Weight/metrekg
Suppliedlength
Part-numbers
2 4 3 . VINYFLEX 02
4 6 3 metre roll VINYFLEX 04
6 8 3 metre roll VINYFLEX 06
8 3 metre roll VINYFLEX 08
Compressed air and other fluids
Applications
products
Applications
RILFLEX
VINYFLEX
Assembly
below.
Characteristics of hose fitted with Stäubli crimped end fittings
inside Ø outside Ø
mm
M.W.P. at 20 °C
bar
M.P.A.B. at 20 °C
bar
Max. temp. °CAqueous fluids
Max. temp. °CHydraulic
fluids
Radius bending
mm
Weight/metre
kg
Part-numbers40 metre rollinch mm
6.4 SUPERFLEX M 06
7.9 SUPERFLEX M 08
3/8 9.5 SUPERFLEX M 10
SUPERFLEX M 12
5/8 23.9 SUPERFLEX M 16
3/4 27 SUPERFLEX M 19
25.4 34.4 SUPERFLEX M 25
Pressure resistance of hose equipped with Stäubli threaded hose stems (with one or two grooves) and with Stäubli hose clamps
inside Ømm
Recommended Stäubli ear clamp Recommended Stäubli worm drive clamp
Part-numbers M.W.P. (bar) at 20 °C Part-numbers M.W.P. (bar) at 20 °C
6.4 CL 1015 ABA 11-17
7.9 CL 1017 ABA 13-20
9.5 CL 1017 ABA 13-20
CL 1021 ABA 15-24
CL 1025 ABA 19-28
CL 1028 ABA 22-32
25.4 CL 1037 ABA 26-38
- medium pressures
Applications
oils under medium pressure
Composition
SUPERFLEX-M
BSP Female thread swivel end fittings made of anti-corrosion treated steel (seat for 60° cone)
F
H
Ø
inside hose Ø mm
passage Ø mm
FH/Flats
mmPart-numbers
6 4 SPF 06.100
8 5 SPF 08.101
7 22 SPF 10.102
9.7 27 SPF 12.103
27 SPF 16.103
32 SPF 19.104
25 38 SPF 25.105
Tapered BSP male thread end fittings made of anti-corrosion treated steel
F
H
Ø
inside hose Ø mm
passage Ø mm
FH/Flats
mmPart-numbers
6 4 SPF 06.160
8 5 SPF 08.161
7 R 3/8 SPF 10.162
9,7 22 SPF 12.163
22 SPF 16.163
R 3/4 27 SPF 19.164
25 36 SPF 25.165
Air comprimé et autres fluides Compressed air and other fluids
To draft your order, refer to page 26.
Characteristics of hose fitted with Stäubli crimped end fittings
inside Ømm
outside Ømm
M.W.P. at 20 °Cbar
M.P.A.B. at 20 °C
bar
Working temp. °C
Radius bending mm
Part-numbers
25 metre roll
5.5 TRESS-FLEX 06
7.5 48 TRESS-FLEX 08
9 85 TRESS-FLEX 10
65 72 TRESS-FLEX 12
22 88 TRESS-FLEX 15
28 6 TRESS-FLEX 20
Pressure resistance of hose equipped with Stäubli threaded hose stems (with one or two grooves) and with Stäubli hose clamps
inside Ømm
Stäubli 2 ears hose clamp recommended Stäubli worm drive hose clamp recommended
Part-numbers M.W.P. (bar) at 20 °C Part-numbers M.W.P. (bar) at 20 °C
5.5 CL 1011 ABA 8-14
7.5 CL 1013 ABA 8-14
9 CL 1017 ABA 11-17
CL 1020 ABA 13-20
CL 1023 ABA 15-24
CL 1031 6 ABA 22-32 6
Assembly principle:
2. Saw through the adhesive tape-wrapped part of the hose held in a vice using a hacksaw.
Assembly
according to the instructions below.
- Sharp elements
Applications
(fuel, fuel oil, hot water, cold water, oil, grease,
Composition
Tapered BSP male thread end fittings made of brass
F
H
inside hose Ømm
F H/Flats Part-numbers
8 TSF 08-161
R 3/8 TSF 10-162
R 3/8 TSF 12-162
22 TSF 15-163
R 3/4 27 TSF 20-164
Female thread swivel end fittings made of brass (seat for 60° cone)
F
H
inside hose Ømm
F H/Flats Part-numbers
8 TSF 08-101
TSF 10-102
TSF 12-102
24 TSF 15-103
TSF 20-104
Tapered BSP male thread swivel end fittings made of brass
F
H
inside hose Ømm
F H/Flats Part-numbers
8 TSF 08-161/2
R 3/8 TSF 10-162/2
R 3/8 TSF 12-162/2
22 TSF 15-163/2
R 3/4 27 TSF 20-164/2
BSP Female thread swivel end fittings made of brass
F
H
inside hose Ømm
F H/Flats Part-numbers
8 TSF 08-101/2
TSF 10-102/2
TSF 12-102/2
24 TSF 15-103/2
TSF 20-104/2
To draft your order, refer to page 26.
Compressed air and other fluids
inside Ø outside Ømm
M.W.P. at 20 °C
bar
M.P.A.B. bar
Working temp. °C
Radius bending mini (mm) Weight/ metre
kgPart-numbers
Inch mm Dynamic Static
4.2 8.2 25 METAFLEX T1-04
6.2 25 METAFLEX T1-06
8.3 32 METAFLEX T1-08
3/8 38 METAFLEX T1-10
85 45 METAFLEX T1-13
3/4 28.3 55 METAFLEX T1-19
25.5 34.2 65 85 METAFLEX T1-25
34.2 43 35 METAFLEX T1-32
52 METAFLEX T1-38
2 62.6 35 METAFLEX T1-50
65.3 2.88 METAFLEX T1-65
OptionsHeat protection sleeve: add /GT code to part number of the hose.
add /GTR code to the part number of the hose. See heat protection sleeve characteristics on page 22.
RAF code to the part number of the hose.
DG code to the part number of the hose. CAF code to the part-number of the hose.
Pressure correction factor according to temperature
Working temperature (°C)
Correction factor
Built in all stainless steel to give high resistance to:
Applications
cooling fluids,
vacuum (for secondary vacuum applications, consult
Composition
corrugations made from an edge to edge welded tube in AISI 316 L stainless steel
AISI 304 stainless steel
considerable advantage of maintaining the required mechanical and corrosion resistance across the entire operating temperature range.
Other fluids - Equipped flexibles
Welded or crimped fittings
FB
E
inside hose Ø fitting Ø (mm) Bmm
Part-numbersinch mm inside Ø E outside Ø F
4 4 6 MTF 04-006/IC4 3.85 6.35 MTF 04-007/IC4 5 8 MTF 04-008/IC6 5 8 MTF 06-008/IC6 6.2 9.52 MTF 06-009/IC8 7 MTF 08-010/IC8 8 MTF 08-012/IC8 8.5 MTF 08-013/IC
Male BSP tapered fittings
F
L
H
inside hose Ø E*mm
FL
mmH
mmPart-numbers
inch mm4 4 MTF 04-160/IC6 6 MTF 06-160/IC6 8.5 MTF 06-161/IC8 8.5 MTF 08-161/IC
3/8 R 3/8 MTF 10-162/IC22 MTF 13-163/IC
3/4 R 3/4 27 MTF 19-164/IC25 26 35 MTF 25-165/IC32 33.5 22 46 MTF 32-166/IC38 39.5 22 MTF 38-167/IC
2 R 2 26 64 MTF 50-168/IC65 65 76 MTF 65-169/IC
Male NPT fittings
F
L
H
inside hose Ø E*mm
FL
mmH
mmPart-numbers
inch mm4 4 MTF 04-250/IC6 7 MTF 06-251/IC8 7 MTF 08-251/IC
3/8 MTF 10-252/IC22 MTF 13-253/IC
3/4 27 MTF 19-254/IC25 24 35 MTF 25-255/IC32 22 46 MTF 32-256/IC38 37 22 MTF 38-257/IC
2 47 26 64 MTF 50-258/IC
Welded fittings
F
B
E
inside hose Ø fitting Ø (mm) Bmm
Part-numbersinch mm inside Ø E outside Ø F3/8 MTF 10-017/IC
MTF 13-021/IC3/4 26.9 MTF 19-027/IC
25 27.3 33.7 MTF 25-034/IC32 36 42.4 MTF 32-042/IC38 48.3 MTF 38-048/IC
2 MTF 50-060/IC65 68.8 MTF 65-076/IC
Other fluids - Equipped flexibles
To draft your order, see page 26.
Female BSP parallel swivel fittings (seat for 60 °C cone)
F
L
H
inside hose Ø E*mm
FL
mmH
mmPart-numbers
inch mm4 4 MTF 04-100/IC6 4 MTF 06-100/IC6 6 2 MTF 06-101/IC8 6 2 MTF 08-101/IC
3/8 8.5 3 22 MTF 10-102/IC4 27 MTF 13-103/IC
3/4 5 32 MTF 19-104/IC25 6 38 MTF 25-105/IC32 26 5 46 MTF 32-106/IC38 33.5 5 55 MTF 38-107/IC
2 39.5 5 65 MTF 50-108/IC65 7 82 MTF 65-109/IC
To draft your order, see page 26.
90° female BSP cylindrical swivel fittings (60° cone seat)
inside hose Ø E*mm
FL
mmH
mmX Part-numbers
inch mm
6 4 MTF 06-100/IC/RE6 6 2 44.5 MTF 06-101/IC/RE8 6 2 44.5 MTF 08-101/IC/RE
3/8 8.5 3 22 47 MTF 10-102/IC/RE4 27 62 MTF 13-103/IC/RE
3/4 5 32 53 MTF 19-104/IC/RE25 6 38 65 MTF 25-105/IC/RE32 26 5 46 78 MTF 32-106/IC/RE38 33.5 5 55 89 MTF 38-107/IC/RE
2 39.5 5 65 MTF 50-108/IC/RE65 7 82 MTF 65-109/IC/RE
F
L
H
x
inside Ø outsideØ
mm
M.W.P. at 20 °C
bar
M.P.A.B. bar
Working temp. °C
Mini acceptableradius bending (mm)
Weight/ metre
kgPart-numbers
inch mm Static Dynamic
76 88 TRESS-FLON 06
TRESS-FLON 08
3/8 TRESS-FLON 10
TRESS-FLON 13
3/4 249 TRESS-FLON 19
375 TRESS-FLON 25
Options for Tress-Flon and Tress-Flon Convoluted hosesHeat protection sleeve: add /GT code to part number of the hose.
add /GTR code to the part number of the hose. See heat protection sleeve characteristics on page 22.
RAF code to the part number of the hose.
CAF code to the part-number of the hose.
Pressure correction factor according to temperature
Working temperature (°C)
Correction factor
Other fluids - Equipped flexibles
TRESS-FLON
Applications
transformation of plastics and pressurised aluminium and zamak foundries
solvants, bases, chlorine.
Composition
AISI 304.
Assembly
inside Ø outside Ømm
M.W.P. at 20 °C
bar
M.P.A.B. bar
Working temp. °C
Mini acceptableradius bending (mm)
Weight/metre
kgPart-numbers
inch mm Static Dynamic
39 TRESS-FLON 06/CV25 53 TRESS-FLON 08/CV
3/8 25 54 TRESS-FLON 10/CV25 56 TRESS-FLON 13/CV
3/4 65 TRESS-FLON 19/CV45 TRESS-FLON 25/CV34 245 TRESS-FLON 32/CV
Pressure correction factor according to temperature
Working temperature (°C)
Correction factor
BSP male tapered fittings
inside hose Ø
mm
E*mm
F Crimped treated steel fittings Crimped stainless steel AISI 316 L fittings
L H/Flats Part-numbers L H/Flats Part-numbers
6 3 TRF 06.160 8 TRF 06.160/IC
6 4 TRF 06.161 TRF 06.161/IC
8 5.5 TRF 08.161 - - -
8 5.5 R 3/8 TRF 08.162 TRF 08.162/IC
7 R 3/8 TRF 10.162 TRF 10.162/IC
R 3/8 22 TRF 13.162 - - -
22 TRF 13.163 22 TRF 13.163/IC
R 3/4 27 TRF 19.164 27 TRF 19.164/IC
25 24 36 TRF 25.165 24 36 TRF 25.165/IC
32 27 24 46 TRF 32.166 24 46 TRF 32 166/IC
Applications
transformation of plastics and pressurised aluminium and zamak foundries
solvants, bases, chlorine.
Composition
AISI 304.
Assembly
F
L
H
Male NPT fittings
FL
H
inside hose Ø
mm
E*mm
FCrimped treated steel fittings Crimped stainless steel AISI 316 L fittings
L H/Flats Part-numbers L H/Flats Part-numbers
6 3 9.8 TRF 06.250 9.8 TRF 06.250/IC
6 4 TRF 06.251 TRF 06.251/IC
8 5 TRF 08.251 TRF 08.251/IC
8 5.5 TRF 08.252 TRF 08.252/IC
7 TRF 10.252 TRF 10.252/IC
22 TRF 13.253 22 TRF 13.253/IC
24 27 TRF 19.254 24 27 TRF 19.254/IC
25 24 36 TRF 25.255 24 36 TRF 25.255/IC
32 27 24 46 TRF 32.256 24 46 TRF 32 256/IC
Female swivel BSP thread (with 60 degree cone seats)
F
L
H
inside hose Ø
mm
E*mm
FCrimped treated steel fittings Crimped stainless steel AISI 316 L fittings
L H/Flats Part-numbers L H/Flats Part-numbers
6 3 5 TRF 06.100 5 TRF 06.100/IC
6 4 TRF 06.101 TRF 06.101/IC
8 5 TRF 08.101 - - -
8 5.5 4.3 22 TRF 08.102 4.3 22 TRF 08.102/IC
4.3 22 TRF 10.102 4.3 22 TRF 10.102/IC
8.5 22 TRF 13.102 - - -
27 TRF 13.103 7 27 TRF 13.103/IC
32 TRF 19.104 9 32 TRF 19.104/IC
25 38 TRF 25.105 38 TRF 25.105/IC
32 27 5.2 TFR 32.106 TRF 32.106/IC
Female swivel metric thread (with 24 degree cone seats) ) ISO 8434/1 L series
F
L
H
inside hose Ømm
FE*
mmL
mmH/Flatsmm
Part-numbers
6 4 3.85 TRF 06.3148 5.5 4.9 TRF 08.316
7 4 22 TRF 10.3183 27 TRF 13.322
3.5 36 TRF 19.33025 4.3 TRF 25.336
90° female swivel BSP thread (with 60 degree cone seats)
insidehose Ø
mmF
Crimped treated steel fittings Crimped stainless steel AISI 316 L fittings
E* L X H/Flats Part-numbers E* L X H/Flats Part-numbers
6 4 6.5 32.5 TRF 06.101/RE 4 26 TRF 06.101/IC/RE
5.7 22 TRF 10.102/RE 4.3 34 22 TRF 10.102/IC/RE
8 45 27 TRF 13.103/RE 37 27 TRF 13.103/IC/RE
8 63.5 32 TRF 19.104/RE
25 9.5 38 TRF 25.105/RE
32 27 7.5 96.5 TRF 32.106/RE
To draft your order, see page 26.
Other fluids - Equipped flexibles
F
L
H
x
inside Ø outside Ømm
M.W.P. at 20 °C
bar
M.P.A.B. at 20 °C
bar
Working temp. °C
Min. bend radius(mm)
Weight/metre
kg
Part-numbers
inch mm 20 metre roll
3/4 VAPOFLEX M 19
25 38 VAPOFLEX M 25
BSP cylindrical male thread end fittings made of AISI 316 L stainless steel
inside hose Ømm
E*mm
FL
mmH/Flats
mmPart-numbers
32 VPF 19-154/IC
25 VPF 25-155/IC
BSP cylindrical female thread swivel end fittings made of AISI 316 L stainless steel
inside hose Ømm
FH/Flats
mmPart-numbers
32 VPF 19-104/IC
25 VPF 25-105/IC
dry steam.
in intermittent service.
Application
Composition
To draft your order, see page 26.
F
L
H
F
L
H
Compatible with all our hoses.
thermal protection of the fibre glass braid that it covers
Physical and mechanical properties
Characteristics and part-numbers of heat protection sleeve alone
inside Ø sleevemm
outside Ø sleevemm
max outside Ø of hose to protectmm
Part-numbers
GT 13
24 GT 16
28 GT 20
25 33 GT 25
35 43 GT 35
48 35 GT 40
OPTION FOR METAFLEX, TRESS-FLON AND TRESS-FLON CONVOLUTED HOSEGT code to the hose part number.
Physical and mechanical properties
OPTION FOR METAFLEX, TRESS-FLON AND TRESS-FLON CONVOLUTED HOSEGTR code to part number of the hose.
Other fluids - Equipped flexibles
THERMAL PROTECTIVE SLEEVE
PROTECTIVE SLEEVE FOR METALLIC BRAIDED HOSE
22
inside Ø outside Ømm
M.W.P. at 20 °C
bar
M.P.A.B. at 20 °C
bar
Working temp. °C
Radius bending
(mm)
Weight/ metre
kgPart-numbers
inch mm
4.7 9.3 75 NERFLEX 05/R7
6.5 NERFLEX 06/R7
NERFLEX 08/R7
3/8 NERFLEX 10/R7
NERFLEX 13/R7
5/8 NERFLEX 16/R7
3/4 26.4 85 254 NERFLEX 19/R7
Hydraulics - Equipped hoses
ApplicationsComposition
Assembly
23
24
inside Ø outside Ømm
M.W.P. at 20 °C
bar
M.P.A.B. bar
Working temp. °C
Radiusbending
(mm)
Weight/metre
kgPart-numbers
inch mm
4.7 9.3 345 NERFLEX 05/R8
6.5 345 NERFLEX 06/R8
295 NERFLEX 08/R8
3/8 275 NERFLEX 10/R8
NERFLEX 13/R8
5/8 NERFLEX 16/R8
3/4 27.9 254 NERFLEX 19/R8
inside Ø outside Ømm
M.W.P. at 20 °C
bar
M.P.A.B. bar
Working temp. °C
Radiusbending
(mm)
Weight/metre
kgPart-numbers
inch mm
3.2 25 NERFLEX 03/TM
4.7 9.3 345 NERFLEX 05/TM
6.5 NERFLEX 06/TM
NERFLEX 08/TM
3/8 NERFLEX 10/TM
75 NERFLEX 13/TM
5/8 23.5 NERFLEX 16/TM
3/4 NERFLEX 19/TM
Hydraulics - Equipped hoses
ApplicationsComposition
Assembly
Assembly
Applications Composition
NERFLEX R8
NERFLEX TM
25
Female BSP cylindrical swivel fittings (with 60° cone seat)
F
L
H
inside hose Ø mm F
Crimped treated steel fittings Crimped stainless steel AISI 316 L fittings
E* L H/Flats Part-numbers E* L H/Flats Part-numbers
3.2 NRF 03.100
4.7 4.2 NRF 05.100 6 NRF 05.100/IC
6.5 5.3 NRF 06.101 NRF 06.101/IC
8 5.5 5.7 NRF 08.101 5.5 4.2 NRF 08.101/IC
8 5.5 22 NRF 08.102 5.5 4 22 NRF 08.102/IC
22 NRF 10.102 6.5 4 22 NRF 10.102/IC
6.5 27 NRF 10.103 4 27 NRF 10.103/IC
9.5 6.5 27 NRF 13.103 27 NRF 13.103/IC
32 NRF 16.104 8.5 32 NRF 16.104/IC
38 NRF 19.105 NRF 19.105/IC
90° female BSP cylindrical swivel fittings (with 60° cone seat)
inside hose Ø
mmF
Crimped treated steel fittings Crimped stainless steel AISI 316 L fittings
E* L X H/Flats Part-numbers E* L X H/Flats Part-numbers
3.2 26 NRF 03.100/RE
4.7 4.2 24 NRF 05.100/RE 4 24 NRF 05.100/IC/RE
6.5 5.3 28 NRF 06.101/RE 28 NRF 06.101/IC/RE
8 5.5 37 22 NRF 08.102/RE 5.5 4 37 NRF 08.102/IC/RE
34 22 NRF 10.102/RE 6.5 4 34 22 NRF 10.102/IC/RE
6.5 37 27 NRF 10.103/RE 4 37 27 NRF 10.103/IC/RE
9.5 6.5 27 NRF 13.103/RE 27 NRF 13.103/IC/RE
48 32 NRF 16.104/RE 8.5 48 32 NRF 16.104/IC/RE
58 38 NRF 19.105/RE 58 NRF 19.105/IC/RE
F
H
L
inside hose Ø mm F
Crimped treated steel fittings Crimped stainless steel AISI 316 L fittings
E* L H/Flats Part-numbers E* L H/Flats Part-numbers
3.2 7.7 NRF 03.160
5 7.7 NRF 05.160 NRF 05.160/IC
6 NRF 06.161 NRF 06.161/IC
8 5.5 NRF 08.161 5.5 NRF 08.161/IC
8 R 3/8 5.5 NRF 08.162 5.5 NRF 08.162/IC
R 3/8 NRF 10.162 NRF 10.162/IC
22 NRF 10.163 22 NRF 10.163/IC
9.5 22 NRF 13.163 22 NRF 13.163/IC
R 3/4 27 NRF 16.164 27 NRF 16.164/IC
36 NRF 19.165 36 NRF 19.165/IC
Male BSP tapered fittings
End fittings, continuation on page 26.
F
L
H
x
26
Hydraulics - Equipped hoses
Female metric swivel fittings with O’ring (and 24° cone seat)
F
H
L
inside hose Ø
mmF
Crimped treated steel fittings Crimped stainless steel AISI 316 L fittings
E* L H/Flats Part-numbers E* L H/Flats Part-numbers
3.2 NRF 03.314
5 4.2 NRF 05.316 4.2 NRF 05.316/IC
6 22 NRF 06.318 22 NRF 06.318/IC
8 5.5 24 NRF 08.320 5.5 24 NRF 08.320/IC
2.5 24 NRF 10.320 2.5 24 NRF 10.320/IC
9.5 NRF 13.324 3.9 NRF 13.324/IC
36 NRF 16.330 2.8 36 NRF 16.330/IC
3.5 36 NRF 19.330 2.6 36 NRF 19.330/IC
Spring guard against flexion.
RAF code to part number of the hose.
Anti hose-whip safety cable:
cable clamp that may be adjusted to your application.
/CAF code to part number of the hose.
overall length (mm)
a b
Tress-Flon hose Overall length
Thermal protection sleeve
Nerflex hose Overall length
safety cable
Options
Creation of equipped hoses part number
b/ Swaged end,a/ Swaged end,R 3/8 male thread
a/ Swaged end, b/ Female metricswivel fitting
27
Recommendations
inside Ø
mm
outside Ø
mm
M.W.P. bar M.P.A.B. at 20 °C
bar
Working temp.
°C
Radius bending
(mm)
Weight/metre
kgColours
Part-numbers
20 metre roll 50 metre rollat 40 °C at 60 °C at 90 °C
5 4 75
blue CALORLOCK 10/KB CALORLOCK 10/KB/50
red CALORLOCK 10/KR CALORLOCK 10/KR/50
green CALORLOCK 10/KV
5 4
blue CALORLOCK 13/KB CALORLOCK 13/KB/50
red CALORLOCK 13/KR CALORLOCK 13/KR/50
green CALORLOCK 13/KV
24.2 5 4
blue CALORLOCK 16/KB
red CALORLOCK 16/KR
green CALORLOCK 16/KV
Made to measure and ready to connect! Stäubli hoses extenders are made to measure and are fitted with:- one of the hoses listed hereafter
Temperature control - Hoses
Applications
control circuits.
Composition
red or green
: Stäubli à
Tool for hose assembly on Stäubli ringed profile hose stems: see on page 29.
28
Recommendations
inside Ø
mm
outside Ø
mm
M.W.P. (bar) M.P.A.B. bar
Max.Temp.
°C
Radius bending
(mm)
Weight/metre
kg
Part-numbers
at 20°C at 40°C at 70°C 25 metre roll
6.6 65 HALOFREE 06/KV
75 HALOFREE 10/KV
HALOFREE 13/KV
Temperature control - Hoses
Applications
use with electronics
emissions is required such as in enclosed areas or confined spaces (submarines, underground equipment, atmospherically controlled environments,
HA
LL OO GG EN
F R E E
Composition
HALOFREE
Tool for hose assembly on Stäubli ringed profile hose stems: see on page 29.
29
Male BSP cylindrical self-lock hose stems with integrated sealing (NBR seal)
FHoses F
Part-numbers
brass 316 L stainless steel
AF 151 - 06/IC/CN
AF 151 - 10/CN
AF 152 - 10/CN AF 152 - 10/IC/CN
AF 151 - 13/CN
AF 152 - 13/CN
AF 153 - 13/CN AF 153 - 13/IC/CN
AF 152 - 16/CN
AF 153 - 16/CN
AF 150 - 06/CN
AF 151 - 06/CN
90° male BSP cylindrical self-lock ringed profile hose stems with integrated sealing
F
Hoses FPart-numbers
brass 316 L stainless steel
AF 152 - 10/CN/RE –
AF 152 - 13/CN/RE –
AF 153 - 16/CN/RE –
Female BSP cylindrical self-lock ringed profile hose stems
F
Hoses FPart-numbers
brass 316 L stainless steel
AF 102 - 10/CN –
AF 103 - 13/CN –
SELF-LOCK hose stems CALORLOCK, LORTAN, HALOFREE, FLEXLOK
Tool for hose assembly
Part-numbers
R 284900 00
on Stäubli ringed profile.
profile with 2 ears or worm drive clamps.
Carefully follow the assembly instructions on data sheet RV1440100 delivered with the tool.
inside Ø
mm
outside Ø
mm
M.W.P. bar M.P.A.B. at 20 °C
bar
Working temp. °C
Radius bending mini.
(mm)
Weight/metre
kg
Recommended Stäubli worm drive clamp
ColoursPart-numbers
20 metre rollat 20 °C at 40°C at 90°C at 110°C
7 7 5 4 45black with a blue stripe CALOREL-EC 08/KB
black with a red stripe CALOREL-EC 08/KR
7 7 5 4black with a blue stripe CALOREL-EC 10/KB
black with a red stripe CALOREL-EC 10/KR
7 7 5 4 53black with a blue stripe CALOREL-EC 12/KB
black with a red stripe CALOREL-EC 12/KR
26 7 7 5 4black with a blue stripe CALOREL-EC 16/KB
black with a red stripe CALOREL-EC 16/KR
7 7 5 4black with a blue stripe CALOREL-EC 19/KB
black with a red stripe CALOREL-EC 19/KR
52 7 5 4 black CALOREL-EC 40
Recommendations
inside Ø
mm
outside Ø
mm
M.W.P. bar M.P.A.B. bar
Working temp. °C
Radius bending (mm)
Weight/metrekg
Recommended Stäubli
worm drive clamp
Part-numbers
25 metre rollat 20 °C at 100°C at 140°C
7 4 4 72 CALOREL S 10/25
7 4 4 96 CALOREL S 12/25
Temperature control - Hoses
Applications
Composition
Recommendations: Stäubli
ApplicationsComposition
: Stäubli
CALOREL-EC
CALOREL-S
way which avoids any stresses or strains: establish required hose lengths and adhere to recommended bend radius so as to avoid bends, flattening or fluid restrictions.
always work in such a way that all movements are within the same
the hose must not be stretched ; a small excess length must be
included as length variations will occur when under load.
source, it must be separated and protected by a thermal sleeve.
Correct installation
The service life of flexible hoses depends frequently on the way in which they are installed. If the following points are always adhered to, the hoses may be used in an optimal way to give a longer service life:
Incorrect installation
In order to guarantee the best working and safety conditions of the Stäubli flexible hoses, it is necessary to respect the followings:
Temperature and pressure data indicated for each hose are set up according to specific assembly and working condition as follows:
Part-numbers
with normal jawsfor front clamping
TEN 1098
with additional jawson the side for front or side clamping
TEN 1099
Part-numbers
flexible screwdriver ABA 3000
Part-numbersClamp
Recommended tightening torque Nm
ABA 8-14ABA 11-17ABA 13-20ABA 15-24ABA 19-28ABA 22-32ABA 26-38ABA 32-44 4.5 - 5.5ABA 38-50 4.5 - 5.5ABA 44-56 4.5 - 5.5ABA 50-65 4.5 - 5.5ABA 58-75 4.5 - 5.5ABA 68-85 4.5 - 5.5ABA 77-95 4.5 - 5.5ABA 87-112 4.5 - 5.5ABA 104-138 4.5 - 5.5ABA 130-165 4.5 - 5.5ABA 150-180 4.5 - 5.5to our products without prior notice.
Stäubli units
www.staubli.com
International sales coordination
e mail: [email protected]
Belgium
Brazil
China
Czech Republic, Slovakia, Hungary
France
Germany, Austria
Hong Kong
India
Italy
Japan
North America
Poland
Portugal
Romania
Russia
Singapore
South Korea
Spain
Switzerland
United Kingdom
Taiwan
Turkey